Fits 2007-2017 Jeep Wrangler and Wrangler Unlimited models (3.8L).

The Gibson Patriot Series Axle-Back Exhaust system delivers an aggressive exhaust note while maintaining minimal interior drone for a comfortable ride on or off the trail. Engineered as a direct bolt-on replacement, this system features 2.5-inch mandrel-bent stainless steel tubing to maximize flow and exhaust velocity. The included Superflow muffler utilizes a baffled and chambered design rather than internal packing, ensuring consistent sound quality that won't degrade over time.

Each kit is finished with premium dual 4-inch rolled-edge black ceramic tips, featuring a proudly displayed brushed stainless American Flag badge. This system installs easily using factory-style hangers and included hardware for a hassle-free upgrade.

• Baffled/chambered Superflow muffler for an aggressive sound without packing blow-out
• 2.5-inch mandrel-bent stainless steel tubing for optimal flow
• Dual 4-inch slash-cut black ceramic coated tips with American Flag badge
• Bolt-on installation using factory mounting points and hangers
• Manufacturer Part Number: 70-0001
• Limited Lifetime Warranty
• Made in the USA

Fits 2019-2024 Ford Ranger Lariat, XL, and XLT models equipped with the 2.3L engine.

The Gibson Black Elite Dual Sport Cat-Back Exhaust System is designed to provide a deep, authoritative tone without the drone typical of aftermarket systems. Engineered specifically for the 2.3L Ford Ranger, this system utilizes 2.5-inch mandrel-bent tubing to optimize exhaust flow, resulting in dyno-proven performance gains of 10-15 horsepower and 15-20 lb-ft of torque. The split rear exit design provides an aggressive look, finished with premium Black Elite ceramic coated tips.

This exhaust is a direct bolt-on replacement for the factory system, utilizing existing mounting points for a hassle-free installation that requires no welding. Proudly manufactured in the USA, every component is built for durability and backed by a Lifetime Limited Warranty.

• System Type: Cat-Back Dual Sport
• Tubing Diameter: 2.5-inch mandrel-bent
• Exit Style: Split rear exit
• Finish: Black Elite ceramic coated tips
• Installation: Bolt-on; no welding required
• Performance: 10-15 HP and 15-20 lb-ft torque gains
• Manufacturer Part Number: 69550B
• Warranty: Lifetime Limited Warranty

Fits 2015-2023 Ford F-150 models (5.0L) including XL, XLT, Lariat, King Ranch, Platinum, Limited, and Raptor.

Improve your truck’s performance and presence with the Gibson Dual Sport Cat-Back Exhaust System. Engineered for a direct bolt-on installation, this system utilizes 3-inch to dual 2.5-inch mandrel-bent stainless steel tubing to optimize exhaust flow and durability. The Superflow baffled muffler delivers a deep, authoritative tone without the intrusive cabin drone typical of performance exhausts, making it an ideal choice for daily drivers and towing applications. The dual rear-exit design places the tips behind the passenger-side tire, providing a custom look that stays clear of trailer tongues.

• T-304 stainless steel construction with mandrel-bent tubing
• Superflow baffled/chambered muffler (no internal packing)
• Dyno-tested gains: 10-15 horsepower and 15-20 lb-ft of torque
• Minimal interior drone with an aggressive exterior sound
• Dual polished stainless round slash-cut clamp-on tips
• Includes all necessary hardware and factory-style hangers
• Hassle-free, no-weld installation
• Manufacturer Part Number: 69221
• Lifetime Limited Warranty

Fits 2022-2026 Toyota Tundra models including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone with the 5.5ft bed (3.5L).

The Gibson Black Elite Dual Sport exhaust system is engineered to provide an aggressive, deep exhaust note for the 3.5L twin-turbo V6 while maintaining minimal interior drone. This cat-back system replaces the restrictive factory exhaust with 2.5-inch mandrel-bent stainless steel tubing, maximizing flow and performance. At the heart of the system is the Superflow CFT muffler, a baffled and chambered design that requires no internal packing to maintain its sound profile over time.

Finished with Gibson's exclusive Black Elite styling, the system features dual T-304 stainless steel tips with a premium black ceramic coating. These 4-inch rolled slash-cut tips provide a high-end, stealth appearance that resists corrosion and heat. The kit is designed as a direct bolt-on replacement, utilizing factory-style hangers and including all necessary hardware for a hassle-free installation.

• System Type: Cat-Back Dual Sport
• Tubing Diameter: 2.5-inch Mandrel Bent Stainless Steel
• Muffler Type: Superflow™ CFT Stainless (Baffled/Chambered)
• Tips: Dual 4-inch T-304 Stainless Steel with Black Ceramic Finish
• Tip Style: Rolled Slash-Cut
• Installation: Easy Bolt-On; No Welding Required
• Manufacturer Part Number: 67104B

Fits select 2010-2020 Chevrolet Tahoe and GMC Yukon models (5.3L).

The Gibson Superflow™ Dual Split Cat-Back Exhaust system is engineered for the enthusiast looking for an aggressive, throaty exhaust note and improved performance. By decreasing backpressure, this system helps produce more torque and increases horsepower, with typical gains averaging between 15-20 hp. The dual exhaust tips exit straight out the back, providing a powerful aesthetic that remains compatible with most bumpers, roll pans, and trailer hitches.

Construction features 2.25-inch stainless steel mandrel-bent tubing for maximum flow and a Superflow™ baffled and chambered muffler. This design eliminates the need for internal packing, ensuring consistent sound quality over time with minimal interior drone. Installation is a straightforward, hassle-free bolt-on process using factory-style hangers and included hardware, requiring no welding.

• Tubing: 2.25 in. stainless steel mandrel-bent tubing
• Exit Position: Dual split rear exit
• Muffler: Superflow™ baffled/chambered design (no internal packing)
• Tips: Polished stainless steel slash-cut tips
• Installation: Bolt-on; includes factory-style hangers and hardware
• Performance: Average gains of 15-20 horsepower
• Warranty: Lifetime Limited Warranty
• Manufacturer Part Number: 65669

Fits 2000-2005 Ford Excursion (Eddie Bauer, Limited, XLS, and XLT) equipped with the 6.8L engine.

The Gibson Single Side Exhaust system is engineered to improve towing capacity and passing power by maximizing low-end torque. Designed specifically for the 6.8L V10, this system focuses performance gains in the 1,800 to 3,000 RPM range, providing the necessary grunt for hill climbing and heavy hauling. The kit features 3-inch stainless steel mandrel-bent tubing to maintain consistent exhaust flow and reduce backpressure.

At the heart of the system is the Superflow™ baffled and chambered muffler. Unlike traditional performance mufflers, it uses no internal packing that can burn out over time, ensuring a consistent aggressive exterior sound with minimal interior drone. The system exits behind the rear tire and is finished with a polished stainless steel slash-cut tip. Installation is a straightforward bolt-on process using factory-style hangers and included hardware, requiring no welding.

• Main Piping: 3-inch stainless steel mandrel-bent tubing
• Muffler Type: Superflow™ Baffled/Chambered (No internal packing)
• Exit Location: Single side, behind rear tire
• Tip Style: Polished stainless steel slash-cut
• Gains: Average 10-15 HP and 15-20 lb-ft of torque
• Installation: Bolt-on; no welding required
• Warranty: Lifetime Limited Warranty
• Manufacturer Part Number: 619995

Fits 2020-2026 Ford Explorer ST and 2020-2025 Lincoln Aviator models equipped with the 3.0L engine.

The Gibson Black Elite Axle-Back Exhaust System is engineered to deliver an aggressive exterior tone while maintaining minimal interior drone, making it the ideal upgrade for the Ford Explorer ST and Lincoln Aviator. This system features 2.25-inch mandrel-bent stainless steel tubing for maximum flow and a baffled, chambered muffler design that eliminates the need for internal packing. The system is finished with intercooled, slash-cut tips featuring a high-temperature black ceramic coating for a stealthy, premium look.

Designed as a direct bolt-on solution, this kit utilizes factory-style hangers and includes all necessary hardware for a hassle-free installation with no welding required. Every Gibson exhaust is dyno-tuned to ensure optimal sound quality and performance for your specific vehicle platform.

• System Type: Axle-Back Dual Exhaust
• Tubing Diameter: 2.25-inch mandrel-bent stainless steel
• Muffler Type: Baffled and chambered; no internal packing
• Tips: Black ceramic stainless round slash-cut intercooled weld-on tips
• Installation: Bolt-on installation using factory mounting points
• Included: All hardware and factory-style hangers
• Warranty: Lifetime Limited Warranty
• Manufacturer Part Number: 619718B

Fits 2011-2018 Ford Explorer Base, Limited, Platinum, Sport, and XLT models equipped with the 3.5L engine.

The Gibson axle-back dual exhaust system is engineered to provide an aggressive sound profile while maintaining minimal interior drone for a comfortable cabin experience. Built around the Superflow CFT Stainless Performance Muffler, this system uses a baffled and chambered design rather than internal packing, ensuring consistent sound and flow characteristics for the life of the vehicle. The 2.25-inch mandrel-bent stainless steel tubing maximizes exhaust velocity and resists corrosion better than aluminized alternatives.

• 2.25-inch mandrel-bent stainless steel tubing for consistent exhaust flow
• Superflow CFT baffled/chambered muffler design with no internal packing to deteriorate
• Dual black ceramic-coated stainless round slash-cut intercooled tips
• Hassle-free bolt-on installation utilizing factory-style hangers and mounting points
• Includes all necessary installation hardware
• Manufacturer Part Number: 619693
• Lifetime Limited Warranty

Fits 2006-2010 Ford Explorer and Mercury Mountaineer models (4.6L).

Enhance your vehicle's low-end power and towing capability with the Gibson Single Side Cat-Back Exhaust. This 3-inch system is engineered to maximize exhaust flow and scavenging, specifically targeting torque gains in the 1,800 to 3,000 RPM range. Constructed from mandrel-bent stainless steel tubing, it provides a durable, corrosion-resistant solution that replaces your restrictive factory pipes.

The heart of the system is the Superflow™ CFT Muffler, which uses a baffled and chambered design rather than internal packing that can blowout or deteriorate over time. This results in an aggressive exterior sound while maintaining a quiet, drone-free cabin environment. The system exits behind the rear tire and is finished with a polished stainless steel round slash-cut tip for a refined look.

• 3-inch mandrel-bent stainless steel tubing for optimal flow velocity
• Superflow™ CFT baffled/chambered muffler design
• Polished stainless steel round slash-cut exhaust tip
• Typical gains of 10-15 HP and 15-20 lb-ft of torque
• Hassle-free, bolt-on installation using factory-style hangers
• No welding or specialized tools required
• Includes all necessary installation hardware
• Manufacturer Part Number: 619692
• Limited Lifetime Warranty

Fits 2016-2023 Toyota Tacoma models equipped with the 3.5L engine.

Gibson’s Black Elite Trail Kit is engineered for the off-road enthusiast who demands maximum ground clearance and low-end power. This single swept-side system focuses on real-world performance, delivering dyno-proven gains of 10-15 horsepower and 15-20 lb-ft of torque in the critical 1,800 to 3,000 RPM range—perfect for towing, passing, and climbing steep trails.

Construction features 2.5-inch mandrel-bent stainless steel tubing and a Superflow CFT performance muffler. The muffler’s baffled and chambered internal design uses no packing material to blow out, ensuring a consistent aggressive sound with minimal interior drone over the life of the vehicle. The system is finished with a premium black ceramic coated stainless steel rolled slash-cut tip for a durable, high-end look.

This exhaust is a direct bolt-on replacement for the factory system, utilizing factory-style hangers and including all necessary hardware. No welding is required for installation.

• Manufacturer Part Number: 618820B
• Tubing Diameter: 2.5-inch Mandrel-Bent Stainless Steel
• Muffler Type: Superflow CFT Stainless (Baffled/Chambered, No Internal Packing)
• Tip Specification: Black Ceramic Stainless Rolled Slash-Cut Tip
• Installation: Bolt-On / No Welding Required
• Warranty: Lifetime Limited Warranty

Fits 2004-2024 Toyota 4Runner (4.0L).

Upgrade your vehicle's presence and performance with the Gibson Black Elite Series Dual Sport cat-back exhaust. This system is engineered to provide a vigorous, deep exhaust tone with an aggressive exterior sound while maintaining minimal interior drone for a comfortable cabin experience. Constructed from 2.5-inch stainless steel mandrel-bent tubing, this kit ensures maximum exhaust flow and durability. At the heart of the system is the Superflow CFT performance muffler, which features a baffled and chambered design with no internal packing to blow out over time.

The Black Elite Series is defined by its premium finish, featuring dual T-304 stainless steel tips coated in Gibson's exclusive black ceramic formula. These 4-inch rolled slash-cut tips offer a high-end, stealthy aesthetic that resists heat and corrosion. Designed for a straightforward installation, the kit includes all necessary hardware and utilizes factory-style hangers for a hassle-free bolt-on process.

• System Type: Cat-Back Dual Sport Exhaust
• Tubing Diameter: 2.5-in. stainless steel mandrel-bent tubing
• Muffler: Superflow CFT Stainless Performance Muffler (Baffled/Chambered)
• Tips: Dual 4-in. Black Ceramic T-304 Stainless Steel Rolled Slash-Cut
• Installation: Easy bolt-on with included hardware and factory-style hangers
• Sound Profile: Aggressive exterior tone with minimal interior drone
• Manufacturer Part Number: 618816B
• Origin: Made in the USA
• Warranty: Limited Lifetime Warranty

Fits 2004-2024 Toyota 4Runner models including Limited, SR5, TRD Pro, and Trail editions (4.0L).

The Gibson Dual Sport Cat-Back Exhaust System is engineered to improve performance while providing a powerful, deep exhaust note without excessive interior drone. Constructed from 2.5-inch stainless steel mandrel-bent tubing, this system features a dual-exit design that routes behind the rear tires. This configuration is ideal for enthusiasts who use their vehicle for towing or off-road use, as it keeps the exhaust exit clear of trailers and gear. The bolt-on installation utilizes factory mounting points, requiring no welding or modifications for a professional result.

• Dyno-tested to provide average gains of 10-15 horsepower and 15-20 lb-ft of torque.
• Dual Sport exit style clears tow hitches and provides a distinct performance look.
• High-quality stainless steel construction for long-term durability and corrosion resistance.
• Authoritative exterior tone with a quiet, comfortable cab environment.
• Includes all necessary hardware for a complete, hassle-free installation.
• Manufacturer Part Number: 618816
• Backed by a Lifetime Limited Warranty.

Fits 2004-2024 Toyota 4Runner models including SR5, Limited, Sport, Trail, TRD Off-Road, and TRD Pro (4.0L).

The Gibson Black Elite Series cat-back exhaust system is engineered to provide a significant upgrade in both exhaust note and engine efficiency for the 4.0L Toyota 4Runner. Featuring mandrel-bent stainless steel tubing and Gibson’s Superflow CFT muffler, this 2.5-inch single-exit system reduces backpressure to deliver gains of 10-15 horsepower and 15-20 lb/ft of torque. The baffled/chambered muffler design provides an aggressive, deep exterior tone while maintaining minimal interior drone for a comfortable cabin environment.

Finished with a T-304 stainless steel rolled slash-cut tip coated in a proprietary black ceramic finish, this system is built for long-term durability in harsh conditions. This is a direct bolt-on replacement for the factory exhaust, utilizing OE-style hangers and including all necessary hardware for a hassle-free installation.

• Series: Black Elite Series Cat-Back Single Exhaust
• Tubing Diameter: 2.5-inch mandrel-bent stainless steel
• Muffler: Superflow CFT (Stainless, Baffled/Chambered, No internal packing)
• Tip: T-304 Stainless Steel with Black Ceramic finish (Rolled slash-cut)
• Installation: Bolt-on with factory-style hangers and included hardware
• Performance: Estimated 10-15 HP / 15-20 lb/ft torque gains
• Warranty: Manufacturer Limited Lifetime Warranty
• MPN: 618815B

Fits 2004-2024 Toyota 4Runner models with the 4.0L engine, including Limited, SR5, TRD Pro, and TRD Off-Road trims.

The Gibson Single Side Exhaust system (MPN 618815) is engineered to maximize low-end torque and horsepower, specifically targeting the 1800 to 3000 RPM range. This makes it an ideal upgrade for towing, hill climbing, and improved passing power. Dyno tests show average gains of 10-15 horsepower and 15-20 lb-ft of torque. The system exits behind the rear tire, providing an aggressive exterior sound while maintaining one of the quietest cabin experiences available for performance exhaust systems.

This system is built from 2.5-inch mandrel-bent stainless steel tubing to ensure consistent flow and long-term corrosion resistance. It features the Gibson Superflow™ muffler, a baffled and chambered design that uses no internal packing to blow out or deteriorate. The kit is finished with a polished stainless steel slash-cut tip and installs easily using factory-style hangers and included hardware.

• 2.5-inch mandrel-bent stainless steel tubing
• Superflow™ baffled/chambered muffler for consistent performance
• Polished stainless steel slash-cut tip
• Direct bolt-on installation; no welding required
• Includes all necessary hardware and factory-style hangers
• Minimal interior drone with an aggressive external profile
• Manufacturer Part Number: 618815
• Lifetime Limited Warranty

Fits all 2016-2023 Toyota Tacoma submodels (Limited, SR, SR5, Trail, and TRD) equipped with the 3.5L engine.

The Gibson Single Side Exhaust is designed to improve low-end performance and towing capability by optimizing exhaust flow. Engineered for the 3.5L Toyota Tacoma, this system focuses on gains between 1,800 and 3,000 RPM, where dyno testing shows increases of 5-7 horsepower and up to 20 foot-pounds of torque. The system utilizes 2.5-inch mandrel-bent stainless steel tubing to maintain consistent diameters through every bend, paired with a Superflow™ baffled and chambered muffler. This design eliminates internal packing that can blowout over time, ensuring a consistent, aggressive exterior sound with minimal interior drone.

Installation is a direct bolt-on process using factory-style hangers and included hardware, requiring no welding. The system exits behind the rear tire and is finished with a polished stainless steel slash-cut tip.

• Manufacturer Part Number: 618814
• Tubing: 2.5-inch mandrel-bent stainless steel
• Muffler: Superflow™ baffled/chambered design (no internal packing)
• Tip: Polished stainless steel slash-cut
• Exit: Single side behind rear tire
• Installation: Bolt-on with factory-style hangers; no welding required
• Warranty: Manufacturer Lifetime Limited Warranty

Fits 2005-2013 Toyota Tacoma Base and Pre Runner (4.0L).

The Gibson Superflow Single Side Exhaust system is engineered to provide improved low-end torque and horsepower, specifically between 1,800 and 3,000 RPM. This makes it an ideal upgrade for Tacoma owners looking for better acceleration, towing power, and hill-climbing capability. Constructed from 2.5-inch mandrel-bent stainless steel tubing, the system ensures consistent exhaust flow and long-term durability against corrosion.

At the heart of the system is the Superflow chambered muffler, which uses a baffled design without internal packing to prevent sound degradation over time. This design delivers an aggressive exterior sound profile while keeping the interior cab quiet with minimal drone. The exhaust exits behind the rear tire and is finished with a polished stainless steel slash-cut tip. Installation is a direct bolt-on process using factory-style hangers and included hardware, requiring no welding.

• 2.5-inch mandrel-bent stainless steel tubing
• Superflow baffled and chambered muffler (no internal packing)
• Polished stainless steel slash-cut tip
• Direct bolt-on installation with factory-style hangers
• Exit location: Single side behind rear tire
• Average gains: 10-15 HP and 15-20 lb-ft of torque
• Manufacturer Part Number: 618802
• Lifetime Limited Warranty

Fits select 2011-2022 Jeep Grand Cherokee and Grand Cherokee WK models (3.6L).

The Gibson Dual Axle-Back Exhaust System is engineered to improve exhaust flow and provide an aggressive, performance-oriented sound for your 3.6L Jeep Grand Cherokee. This system features a Superflow™ CFT Stainless Performance Muffler with a baffled and chambered internal design, eliminating the need for internal packing while maintaining a deep tone with minimal interior drone. Constructed from 2.25-inch mandrel-bent stainless steel tubing, this kit ensures consistent diameter throughทุก bend for optimal gas velocity.

Installation is a straightforward, bolt-on process that utilizes factory-style hangers and includes all necessary hardware, requiring no welding. The system is finished with dual black ceramic-coated stainless steel tips, featuring a round, slash-cut, intercooled design for a professional look.

• Manufacturer Part Number: 617407
• Tubing Diameter: 2.25-inch mandrel-bent stainless steel
• Muffler Type: Superflow™ CFT (Baffled/Chambered)
• Tip Finish: Black Ceramic Stainless Steel
• Tip Style: Round Slash-Cut Intercooled
• Installation: Bolt-on, no welding required
• Includes all hardware and factory-style hangers
• Backed by a Lifetime Limited Warranty

Fits 2019-2021 Jeep Cherokee Trailhawk and Trailhawk Elite (3.2L).

The Gibson Dual Split Cat-Back Exhaust System is designed to provide a deep, authoritative rumble for your Jeep Cherokee while improving exhaust flow. This system features 2.5-inch and 2.25-inch stainless steel mandrel-bent tubing to maintain consistent diameter through every curve, reducing backpressure. At the heart of the system is the Superflow Superflow™ baffled and chambered muffler, which uses resonance chambers and directional louvered ports to tune the exhaust note without the need for internal packing that can blow out over time.

Constructed for longevity and a precise fit, the system bolts directly to factory mounting points using the included hardware and factory-style hangers. The exit is finished with premium black ceramic-coated stainless steel slash-cut tips for a rugged, high-performance look.

• Baffled/chambered Superflow™ muffler for aggressive sound with minimal interior drone
• Stainless steel mandrel-bent tubing (2.5in and 2.25in)
• Dual black ceramic-coated stainless slash-cut tips
• Hassle-free, bolt-on installation with all hardware included
• No welding or internal packing required
• Manufacturer Part Number: 617208
• Lifetime Limited Warranty

Fits 2011-2026 Dodge Durango and 2021-2023 GMC Yukon (5.7L).

Upgrade your vehicle's presence and acoustic profile with the Gibson Stainless Steel Axle-Back Dual Exhaust System. This system is engineered to replace the restrictive factory rear exhaust section with 2.25-inch mandrel-bent stainless steel tubing, maximizing exhaust flow while maintaining minimal interior drone. The chambered muffler design delivers a deep, aggressive tone without the use of internal packing that can break down or change sound over time.

Designed for a hassle-free, bolt-on installation, this kit utilizes factory-style hangers and includes all necessary hardware to ensure professional-looking results without the need for welding. The system is capped with polished stainless steel round double-wall slash-cut tips for a refined, high-performance aesthetic.

• Direct bolt-on installation using factory-style hangers
• 2.25-inch mandrel-bent stainless steel tubing for consistent flow
• Chambered/baffled muffler design with no internal packing
• Polished stainless steel round double-wall slash-cut tips
• Includes all necessary installation hardware
• Manufacturer Part Number: 616006
• Backed by a Lifetime Limited Warranty

Fits 2015-2022 Chevrolet Colorado and GMC Canyon models equipped with the 2.5L engine, including LT, WT, Z71, ZR2, Denali, and AT4 trims.

The Gibson Dual Extreme Cat-Back Exhaust system is engineered for drivers seeking an aggressive exhaust note and improved street performance. This system features 2.25-inch mandrel-bent aluminized tubing that maintains consistent diameter through every bend to maximize flow. At the core of the system is the Superflow CFT muffler, a baffled and chambered design with no internal packing to blow out, ensuring a consistent sound profile over the life of the vehicle. The dual exhaust exits behind the rear tires at an aggressive angle, finished with polished T304 stainless steel slash-cut tips.

Designed as a direct bolt-on upgrade, this kit uses factory-style hangers and includes all necessary hardware for a no-weld installation. Dyno testing has shown average performance gains of 15-20 horsepower while maintaining minimal interior drone for a comfortable cabin experience.

• Manufacturer Part Number: 5587
• Tubing Diameter: 2.25-inch mandrel-bent aluminized steel
• Muffler Type: Superflow™ CFT (Baffled/Chambered)
• Exit Location: Dual rear exit behind tires
• Tips: 4-inch polished stainless steel slash-cut (clamp-on)
• Installation: Bolt-on; no welding or drilling required
• Warranty: Manufacturer Lifetime Limited Warranty

The Gibson CFT Superflow Dual/Dual Oval Muffler (55105S) uses Convergent Flow Technology to tune your exhaust pulses, utilizing resonance chambers and directional louvered tuning ports to increase exhaust velocity. This 4x9x13-inch stainless steel muffler features a fully welded internal construction and a chambered, non-packed core. By eliminating internal packing materials like fiberglass or wool, this muffler ensures your vehicle maintains its deep, aggressive tone for the long term without the sound degradation common in packed mufflers.

• Inlet/Outlet Diameter: 2.25-inch (Dual/Dual)
• Case Dimensions: 4in x 9in x 13in
• Material: Fully welded stainless steel
• Internal Design: Chambered and louvered with angular induction
• Maintenance: Non-packed design prevents sound blow-out or degradation
• Fitment: Reversible design for flexible installation
• Manufacturer Part Number: 55105S
• Warranty: Lifetime Limited Warranty

Fits select 2007-2010 Cadillac Escalade ESV, Escalade EXT, and GMC Yukon XL 1500 Denali (6.2L). This Dual Extreme cat-back exhaust system is engineered for truck owners seeking an aggressive exterior sound with minimal interior resonance. The system features dual exits behind the rear tires at slash-cut angles, providing a custom look and a powerful exhaust note tuned for the 6.2L engine.

The assembly is constructed from 2.5-inch mandrel-bent aluminized tubing to maintain consistent flow and exhaust velocity. At the heart of the system is the Superflow CFT muffler, a baffled and chambered design that operates without internal packing to ensure long-term sound consistency. The kit includes polished stainless steel slash-cut clamp-on tips for a finished appearance and a complete hardware set for a straightforward installation.

• Main Piping: 2.5-inch mandrel-bent aluminized tubing
• Muffler Type: Superflow CFT (Baffled/Chambered, no internal packing)
• Exit Style: Dual Extreme (Exits behind rear tires)
• Tips: Polished stainless steel slash-cut clamp-on
• Installation: 100% bolt-on; no welding required
• Included: All necessary hardware and factory-style hangers
• Manufacturer Part Number: 5403

The Gibson Performance Elite Series Exhaust Tip (MPN 500645-B) provides a clean, aggressive finish for your vehicle's exhaust system. Constructed from premium T304 stainless steel, this 12-inch tip features a high-temperature matte black ceramic coating designed to withstand harsh road conditions while resisting corrosion and discoloration.

This round, rolled-edge tip utilizes a slash-cut (angle-cut) profile and includes an embossed Gibson logo for a distinct look. The integrated clampless connection design allows for a secure, bolt-on installation without the need for welding, making it a straightforward upgrade for 3.5-inch exhaust pipes. Proudly featuring American craftsmanship, this tip is built for long-term durability and style.

• Series: Gibson Elite Series
• Material: T304 Stainless Steel
• Finish: Matte Black Ceramic
• Inlet Diameter: 3.5 in.
• Outlet Diameter: 4.0 in. (OD)
• Overall Length: 12.0 in.
• Design: Round Rolled Slash-Cut
• Installation: Clampless Bolt-On
• Manufacturer Part Number: 500645-B
• Warranty: Lifetime Limited Warranty

The Gibson 500415 Turn Down Slash-Cut Exhaust Tip provides a refined, professional finish for your exhaust system. Unlike chrome-plated tips that can chip, flake, or rust over time, this tip is manufactured from polished stainless steel to ensure long-lasting corrosion resistance and a brilliant show-quality luster.

Designed for easy installation, the tip features Gibson’s exclusive built-in clampless connection. This allows for a secure bolt-on fitment without the need for welding or unsightly external clamps. The classic turn-down slash-cut design effectively directs exhaust flow while the embossed Gibson logo adds a signature touch to your vehicle’s rear profile.

• Manufacturer Part Number: 500415
• Inlet Diameter: 1.5 in.
• Outlet Diameter (OD): 1.5 in.
• Overall Length: 8 in.
• Material: Polished Stainless Steel
• Style: Turn Down Slash-Cut
• Mounting: Integrated Clampless Bolt-On Design

Upgrade your vehicle's exhaust exit with the Gibson 500409 polished stainless steel exhaust tip. Designed for both durability and aesthetics, this turn-down slash-cut tip replaces dull or rusted factory tailpipe ends with a high-luster finish that resists chipping, flaking, and corrosion. Unlike traditional chrome-plated tips, this stainless steel component is built to withstand high heat and harsh road debris without losing its brilliance.

Installation is efficient and secure thanks to Gibson's exclusive built-in clampless connection design. This allows for a clean, easy bolt-on fitment to your existing tailpipe without the need for specialized welding or bulky external clamps, providing a professional show-quality finish immediately.

• Polished stainless steel construction for superior rust and corrosion resistance
• Exclusive clampless connection for a secure, weld-free bolt-on installation
• Turn-down slash-cut profile for a classic performance look
• Embossed Gibson logo for authenticity

• Manufacturer Part Number: 500409
• Inlet Diameter: 2.25 in.
• Outlet Diameter (OD): 3.0 in.
• Overall Length: 12.0 in.
• Material: Stainless Steel
• Finish: Polished

Give your vehicle a professional finishing touch with the Gibson Round Single Wall Angle-Cut Exhaust Tip. Manufactured from high-quality polished stainless steel, this tip is engineered to resist chipping, flaking, and rusting, providing a durable "show look" that outlasts traditional chrome plating.

Designed for enthusiasts who demand both aesthetics and easy maintenance, this tip features Gibson’s exclusive clampless connection. This allows for a secure, straightforward bolt-on installation directly to your existing tailpipe without the need for specialized tools or welding. Each tip is finished with an embossed Gibson logo, ensuring authentic branding on your exhaust system.

• Material: Polished Stainless Steel
• Outlet Diameter: 4.0 in. (OD)
• Inlet Diameter: 3.0 in. (ID)
• Overall Length: 12.0 in.
• Tip Design: Round, Single Wall, Angle-Cut
• Mounting Style: Clampless Bolt-On
• Manufacturer Part Number: 500379

The Gibson 500370 Round Single Wall Angle-Cut Exhaust Tip provides a clean, finished appearance for your exhaust system. Unlike chrome-plated alternatives, this tip is manufactured from polished stainless steel to ensure it will not chip, flake, or rust over time. The single-wall design features a classic angle-cut profile and an embossed Gibson logo for a professional look.

Engineered for a secure and straightforward fit, this tip features a built-in clampless connection design. This allows for a quick bolt-on installation onto a 2.25-inch tailpipe without the need for specialized clamps or welding. It is an ideal solution for completing a custom exhaust build or replacing a worn factory tip with a more durable component.

• Part Type: Exhaust Tip
• Material: Polished Stainless Steel
• Style: Round Single Wall, Angle-Cut
• Inlet Diameter: 2.25 in.
• Outlet Diameter: 3 in.
• Overall Length: 8 in.
• Installation: Bolt-On Clampless Connection
• Manufacturer Part Number: 500370

Finish your exhaust system with the Gibson 500360 Round Single Wall Angle-Cut Exhaust Tip. Unlike chrome-plated options that are prone to chipping and flaking, this tip is manufactured from high-quality polished stainless steel for long-term corrosion resistance and a lasting "show look" shine.

Gibson's exclusive clampless connection design simplifies the upgrade process, providing a secure, easy bolt-on installation without the need for welding or extra hardware. The single-wall construction and precision angle-cut design offer a clean, aggressive aesthetic, complete with an embossed Gibson logo for brand authenticity.

• Material: Polished Stainless Steel
• Inlet Diameter: 3 in.
• Outlet Diameter (OD): 3.5 in.
• Length: 12 in.
• Tip Style: Single-Wall, Angle-Cut
• Installation: Clampless Bolt-On Design
• MPN: 500360

The Gibson SFT Superflow Round Muffler (Part #420887) is engineered to deliver a deep, authoritative exhaust note at the tailpipe while keeping drone and interior noise levels significantly lower than traditional aftermarket options. This 8-inch diameter, 24-inch long muffler is designed for high-flow applications, providing the volume efficiency needed to support increased power and torque.

Constructed from fully welded stainless steel, this muffler utilizes a baffled and chambered internal design. By eliminating packing and screens that can burn out or deteriorate over time, Gibson ensures consistent performance and flow characteristics throughout the life of the component. The 3-inch center inlet and 3-inch center outlet allow for unrestricted exhaust scavenging in custom or replacement exhaust systems.

• Part Number: 420887
• Body Shape: 8-inch Round
• Body Length: 24 inches
• Inlet/Outlet: 3.00-inch Center / 3.00-inch Center
• Material: Stainless Steel
• Design: Fully welded, baffled, and chambered
• Internal construction: No packing or screens to blow out

Fits 2010-2015 Chevrolet Camaro LS and LT models (3.6L).

Give your V6 Camaro a deep, powerful muscle car rumble with the Gibson Axle-Back Dual Exhaust system. This performance upgrade replaces the restrictive factory rear section with 2.25-inch aluminized mandrel-bent tubing, ensuring consistent diameter throughout the bends to optimize exhaust gas velocity and reduce backpressure.

At the heart of the system is a precision-engineered baffled and chambered muffler. Unlike standard mufflers that rely on fiberglass or wool packing that can deteriorate over time, this design uses resonance chambers and directional louvered tuning ports to create an aggressive exterior tone while maintaining minimal interior drone. The system is finished with polished stainless steel round double-wall slash-cut tips for a high-end look that fills out the factory bumper cutouts.

• Manufacturer Part Number: 320001
• Tubing Diameter: 2.25-inch
• Material: Aluminized steel with polished stainless steel tips
• Muffler Design: Baffled/Chambered (No internal packing to blow out)
• Tip Specs: Polished stainless round double-wall slash
• Installation: Hassle-free bolt-on using factory-style hangers and included hardware
• Warranty: Lifetime Limited Warranty