The Haltech Elite 1500 ECU (HT-150901) is a powerful engine management solution designed for universal 1-8 cylinder or 2-rotor applications. This unit features integrated Drive-By-Wire (DBW) control and specialized Race Functions, providing professional-level calibration tools for high-performance tuning. With its waterproof housing and robust processing power, it delivers precise control over fueling and ignition timing in demanding environments.

This package includes the necessary plug and pin set for custom loom construction, ensuring a secure electrical interface. The Elite 1500 supports up to 4 injector and 4 ignition outputs, making it ideal for sequential setups on 4-cylinder engines or semi-sequential configurations on larger powerplants.

• Manufacturer Part Number: HT-150901
• Output Configuration: Up to 4 injector and 4 ignition outputs
• Engine Support: Universal 1-8 cylinder or 2-rotor applications
• Control Features: Integrated Drive-By-Wire (DBW) and Race Functions
• Included Hardware: Elite 1500 ECU, Plug and Pin Set, USB programming cable, and USB software key

The Haltech Elite 1500 ECU (HT-150900) is a powerful standalone engine management system designed for universal 1-8 cylinder or 2-rotor applications. This unit features integrated Drive-By-Wire (DBW) throttle control and advanced Race Functions, providing a comprehensive solution for precision tuning in both street and competitive racing environments.

• Up to 4 injector and 4 ignition outputs
• Suits universal 1-8 cylinder or 2-rotor engines
• Integrated Drive-By-Wire (DBW) throttle control
• Built-in Race Functions for high-performance applications
• Manufacturer Part Number: HT-150900

Includes: Elite 1500 ECU, USB programming cable, and USB Software Key.

The Haltech Elite 750 ECU Kit with Premium Universal Wire-In Harness (HT-150604) provides a professional-grade engine management foundation for custom vehicle projects and EFI conversions. This kit is designed for builders who require full control over fuel and ignition mapping in applications where a vehicle-specific adapter is not available.

The Elite 750 series ECU offers advanced tuning capabilities in a compact, durable package. The included Premium Universal Wire-In Harness streamlines the installation by providing a high-quality wiring solution with an integrated fuse and relay box, ensuring clean power distribution and circuit protection for your engine's sensors and actuators.

• Manufacturer Part Number: HT-150604
• Product Series: Elite 750
• Harness Type: Premium Universal Wire-In
• Included Hardware: Elite 750 ECU, Premium wiring harness, and integrated fuse/relay box
• Application: Universal wire-in for custom engine management configurations

The Haltech Elite 750 Basic Universal Wire-In Harness ECU Kit (HT-150602) is a comprehensive engine management solution designed for custom builds, engine swaps, and applications where a vehicle-specific harness is not available. This kit features the Elite 750 ECU, a powerful and compact unit that provides precise control over fuel injection and ignition for 1-6 cylinder or 2-rotor engines.

Built for durability in demanding environments, the ECU is housed in a waterproof case, making it suitable for both street and off-road use. The included basic universal wire-in harness provides the necessary wiring to integrate the ECU into your vehicle's custom loom, ensuring a professional-grade installation with high-quality connectors.

• Manufacturer Part Number: HT-150602
• Kit Includes: Elite 750 ECU and Basic Universal Wire-In Harness
• Application: Universal wire-in for 1-4 cylinder or 2-rotor engines
• Environment: Waterproof ECU housing (IP67 rated)
• Connectivity: USB laptop communication for Haltech ESP software
• Features: Internal data logging and engine protection functions

The Haltech Elite 750 (HT-150600) is a powerful standalone engine management system designed for universal applications. Built to provide precise control for street or track vehicles, it supports 1 to 12 cylinder engines as well as 2 to 3 rotor configurations. This ECU is ideal for builders who need a high-performance, mid-range solution without the excessive cost of high-channel-count units.

Featuring six dedicated fuel injection and six ignition outputs, the Elite 750 allows for sequential firing on engines up to six cylinders or wasted spark setups on larger platforms. The unit is housed in a rugged, environmentally sealed case to ensure consistent operation in demanding engine bay conditions.

• Manufacturer Part Number: HT-150600
• Outputs: Up to 6 fuel injection and 6 ignition
• Compatibility: Universal 1-12 cylinder and 2-3 rotor applications
• Environmental: Waterproof USB cap and sealed housing
• In the Box: Elite 750 ECU, waterproof USB cap, USB programming cable, and software CD

The Haltech Elite 550 (HT-150401) is a professional-grade, entry-level standalone ECU designed for universal application on 1 to 4 cylinder engines or 2-rotor engines. Housed in a robust, IP67-rated waterproof case, this engine management system provides precise control for EFI conversions and performance builds where reliability is paramount.

• 4 x Fuel Injection Outputs (High or Low Impedance)
• 4 x Ignition Outputs
• Internal 3-bar MAP sensor (rated for up to 30psi of boost)
• IP67 waterproof rated housing for engine bay mounting
• High-speed USB communication for tuning and data logging
• Includes full Plug and Pin Set for custom wiring harness construction
• Compatible with Haltech ESP software for advanced tuning

This kit provides the essential hardware needed for a clean installation, allowing for closed-loop O2 control and comprehensive data logging in a compact, durable form factor. Part number: HT-150401.

Streamline your engine management upgrade with the Haltech Elite 2000/2500 Plug-n-Play Adaptor Harness. This harness is designed specifically for the Nissan Skyline R32, providing a direct interface between the factory wiring loom and your Haltech Elite 2000 or 2500 ECU. By utilizing this adaptor, you eliminate the need for time-consuming wire cutting or splicing, ensuring a clean and reversible installation.

• Compatible with Haltech Elite 2000 and Elite 2500 ECUs
• Direct plug-and-play connection to the Nissan Skyline R32 factory engine harness
• Maintains factory loom integrity without permanent modifications
• High-quality connectors and pinning for reliable signal transmission
• Manufacturer Part Number: HT-141357

The Haltech Elite 1000-2500 Plug-n-Play Adaptor Harness (HT-141328) streamlines the transition to a standalone engine management system. This harness provides a direct interface between your factory wiring loom and a Haltech Elite 1000 or 2500 ECU, significantly reducing installation time and complexity by eliminating the need for custom wire-by-wire splicing.

By using this adaptor, you avoid permanent modifications to the original vehicle harness. It is designed to utilize existing factory sensors and actuators for a professional-grade installation that maintains wiring integrity and is fully reversible if the vehicle needs to be returned to stock configuration.

• Direct Integration: Plugs directly into factory ECU connectors and the Haltech Elite 1000 or 2500 ECU.
• Simplified Installation: Removes the labor-intensive process of pinning a universal loom.
• Preserved Integrity: Maintains original wiring loom condition and clean signal paths for factory sensors.
• Manufacturer Part Number: HT-141328

The Haltech Elite 2500 Basic Universal Wire-In Harness (HT-141302) is a professional-grade flying-lead solution for custom engine management installations. Measuring 2.5m (8ft) in length, this harness provides a direct connection to your Elite 2500 ECU, featuring color-coded wiring that follows the standard Haltech schematic for efficient pin-out to sensors, injectors, and ignition components.

As a "Basic" configuration, this harness is specifically designed for builds where a custom power distribution system is already in place. It does not include integrated relays or fuses, allowing experienced installers to wire the harness into their own existing relay blocks or power distribution modules (PDMs).

• Compatible ECU: Haltech Elite 2500
• Length: 2.5m (8ft)
• Harness Type: Universal Wire-In (Flying Lead)
• Power Distribution: No Relays or Fuses included
• Manufacturer Part Number: HT-141302

Fits 1998-2002 Nissan Skyline R34 GTT.

The Haltech Elite 2000/2500 Plug-n-Play Adaptor Harness (HT-141258) provides a professional-grade interface for installing a Haltech Elite series ECU into your Nissan Skyline R34 GTT. This harness allows you to utilize the vehicle's factory engine loom, ensuring a reliable connection without the need for cutting, splicing, or permanent modifications to the original wiring.

• Direct plug-and-play integration with Haltech Elite 2000 and Elite 2500 ECUs
• Engineered to maintain factory engine sensor connectivity and wiring integrity
• Simplifies EFI upgrades and tuning setup while remaining fully reversible
• Manufactured with high-quality connectors for secure electrical contact
• Manufacturer Part Number: HT-141258

This product includes the adaptor harness only; the Haltech Elite ECU and any additional required sensors are sold separately.

The Haltech Elite 2000/2500 Plug-n-Play Adaptor Harness (HT-141233) provides a professional-grade interface between your vehicle's factory wiring loom and a Haltech Elite series ECU. This harness is engineered for tuners and enthusiasts who require a reliable, high-integrity connection without the complexity of a custom wire-tuck or the risks associated with manual wire splicing.

By utilizing factory-style connectors, this adaptor ensures a seamless fit that maintains the integrity of the original electrical system. This plug-and-play architecture significantly reduces installation time and makes the transition to standalone engine management completely reversible, protecting the vehicle's resale value and simplifying future maintenance.

• Compatible with Haltech Elite 2000 and Elite 2500 ECUs
• Direct-fit connectors eliminate the need for cutting, splicing, or repinning the factory loom
• High-quality automotive-grade wiring and shielding for maximum signal integrity
• Simplifies the installation of standalone engine management
• Manufacturer Part Number: HT-141233

The Haltech HT-140960 Plug-n-Play Adaptor Harness provides a professional, non-destructive solution for integrating a Haltech Elite 1000 or Elite 1500 ECU with your vehicle's factory wiring. This harness eliminates the need for wire splicing or custom loom fabrication, allowing for a direct connection between the OEM harness and the Elite series waterproof ECU connectors.

• Precision Engineering: Designed specifically for the Elite 1000 and Elite 1500 engine management systems.
• Seamless Integration: Bridges the gap between factory engine sensors and the Haltech ECU, maintaining signal integrity and reducing the risk of wiring errors.
• Serviceability: Allows for a quick return to the factory ECU setup if required, making it ideal for track-driven street vehicles.
• Durable Construction: Features automotive-grade wiring and high-quality connectors built to withstand the heat and vibration of the engine bay.
• Part Number: HT-140960

The Haltech Elite 1000/1500 Plug-n-Play Adaptor Harness (HT-140840) provides a streamlined solution for integrating an aftermarket ECU into your vehicle's factory electrical system. This adaptor allows for a clean installation of either an Elite 1000 or Elite 1500 ECU by bridging the connection to the original engine loom without the need for permanent modifications, wire cutting, or soldering.

• Engineered for direct compatibility with Haltech Elite 1000 and 1500 series ECUs
• Simplifies installation by utilizing factory-style connectors for a true plug-and-play setup
• Reduces the risk of wiring errors and maintains the integrity of the OEM harness
• Constructed with high-quality terminals and wire for reliable signal transmission under high-performance conditions
• Manufacturer Part Number: HT-140840

Fits Mitsubishi Lancer Evolution IV, V, VI, VII, VIII and 1995-1999 Eclipse/Talon (2G) models.

The Haltech Elite 1000/1500 Plug-n-Play Adaptor Harness (HT-140823) provides a professional wiring solution for installing a Haltech Elite series ECU without modifying your vehicle's factory loom. This harness bridges the gap between the OEM engine harness and the Elite 1000 or 1500, ensuring a secure, high-integrity connection for all sensors and actuators. It is an essential component for tuners looking for a reversible, reliable ECU upgrade for track or high-performance street use.

• Direct plug-and-play installation into factory wiring harness
• Compatible with Haltech Elite 1000 and Elite 1500 ECUs
• Prevents the need for cutting, splicing, or pinning the OE loom
• Constructed with automotive-grade connectors for maximum reliability
• Manufacturer Part Number: HT-140823

The Haltech Elite 750 Premium Universal Wire-In Harness (HT-140604) provides a professional-grade wiring solution for custom engine management projects. Measuring 2.5 meters (8 feet) in length, this harness is designed for installations where a model-specific loom is not available, offering a clean and reliable way to connect your Elite 750 ECU to your engine's sensors and actuators.

This premium harness features an integrated, molded 6-circuit power distribution module. The included fuse box comes with a weather-resistant lid and is pre-configured with the necessary relays and fuses to power the ECU and basic engine functions, while providing spare circuits for auxiliary components such as fuel pumps or fans.

• Length: 2.5m (8ft)
• Includes high-quality firewall grommet for secure cabin pass-through
• Molded 6-power circuit Haltech fuse box with protective lid
• Equipped with 2 relays and 4 fuses
• Includes terminal pins for the 4 spare power circuits
• Manufacturer Part Number: HT-140604

The Haltech IC-7 OBDII to CAN cable provides a direct, plug-and-play connection between your IC-7 Display Dash and the vehicle's factory OBDII diagnostic port. This interface allows the dash to communicate with the vehicle's ECU, streaming real-time engine data, sensor readings, and diagnostic parameters directly to the digital display without the need for custom wiring or splicing into the factory harness.

With a 1400mm (55in) length, this cable offers sufficient reach for routing through the dashboard and behind interior trim panels for a clean, professional-grade installation. It is built with high-quality connectors to ensure stable data transmission and long-term durability in automotive environments.

• Manufacturer Part Number: HT-135003
• Total Length: 1400mm (55 inches)
• Connection Type: OBDII to CAN
• Application: Compatible with Haltech IC-7 Display Dash units
• Simplifies data logging and real-time monitoring via the OBDII port

The Haltech HT-135000 Elite CAN Cable provides a secure, high-integrity bridge between your Elite series ECU and the vehicle’s OBDII port. This cable is essential for users needing to interface their engine management system with OBDII-compliant diagnostic tools or displays using the CAN bus protocol.

Measuring 1800mm (72 inches), this cable provides ample length for clean interior routing from the ECU mounting location to the diagnostic port under the dashboard. It features a rugged 4-pin DTM connector on one end for the Haltech CAN bus and a standard 16-pin OBDII plug on the other, ensuring a plug-and-play installation without the need for custom wiring or pinning.

• Connects Haltech Elite series ECUs to the vehicle OBDII port
• Length: 1800mm (approx. 72 inches)
• Connectors: 4-pin DTM (DTM-4) to OBDII
• Designed for reliable CAN bus communication and diagnostic access
• Manufacturer Part Number: HT-135000

Fits Toyota 2JZ engines utilizing the Haltech Elite 2000 or 2500 ECU.

The Haltech Elite 2000/2500 Terminated Main Engine Harness (HT-130318) provides a professional-grade wiring solution for 2JZ engine management. This pre-terminated loom eliminates the need for complex custom pinning and manual wire termination, offering a direct, plug-and-play interface with the Haltech Elite series ECUs. It is designed to handle fuel injection, ignition, and essential engine sensor signals with maximum reliability in high-performance environments.

• Designed specifically for Toyota 2JZ engine platforms
• Fully compatible with Haltech Elite 2000 and 2500 ECUs
• Pre-terminated for a simplified, professional installation
• High-quality shielding and connectors for signal integrity
• Manufacturer Part Number: HT-130318

The Haltech HT-130040 is a precision-engineered 3-inch CAN adaptor cable designed to facilitate seamless data communication between different connector standards in your vehicle's CAN bus network. This adaptor serves as a critical bridge when integrating various Haltech expansion modules, digital dashes, or wideband controllers into a loom that utilizes disparate plug styles.

• Replaces/Converts: Adapts a DTM-4 female receptacle to an 8-pin black Tyco connector
• Length: 3 inches (approx. 75mm) for compact, clutter-free installation
• Build: High-quality automotive-grade wiring and connectors for maximum signal integrity
• Compatibility: Engineered for use within Haltech CAN bus ecosystems
• Manufacturer Part Number: HT-130040

Whether you are updating your engine management setup or adding new sensors to a legacy loom, this adaptor ensures a secure, plug-and-play connection without the need for manual repinning or wire splicing.

Integrate your vehicle's electronics with this genuine Haltech Elite CAN cable (HT-130026). Measuring 1800mm (72 inches), this cable provides the necessary length for routing data connections between your ECU, CAN hubs, wideband controllers, and digital dashes. It features high-quality DTM-4 connectors on both ends to ensure a secure, vibration-resistant connection in demanding automotive environments.

• Product Type: CAN Bus Extension/Communication Cable
• Connectors: DTM-4 to DTM-4
• Length: 1800mm (72 inches)
• Application: Connects Haltech Elite series ECUs and accessories
• Manufacturer Part Number: HT-130026

The Haltech Elite CAN Cable (HT-130025) provides a robust, plug-and-play communication link for connecting expansion modules to your ECU. Measuring 1200mm (approximately 48 inches), this cable offers the necessary length to route wiring through the firewall or across the chassis to reach wideband controllers, digital dashes, or I/O expanders.

Designed for the harsh environments of performance automotive applications, this cable utilizes high-quality DTM-4 connectors on both ends to ensure a secure, vibration-resistant, and weather-sealed connection. It is an essential component for expanding your Haltech ecosystem while maintaining signal integrity for critical sensor data.

• Manufacturer Part Number: HT-130025
• Length: 1200mm (48 inches)
• Connector Type: DTM-4 to DTM-4
• Compatibility: Haltech Elite Series and CAN-enabled expansion devices
• Construction: Protected with durable automotive-grade sleeving

The Haltech HT-130023 is a 600mm (24-inch) CAN cable designed for the Haltech Elite ecosystem. This cable facilitates high-speed data communication between an Elite series ECU and CAN-enabled accessories such as wideband controllers, digital dash displays, and expansion modules. Featuring genuine Deutsch DTM-4 connectors on both ends, it provides a secure, vibration-resistant, and weatherproof connection essential for performance automotive environments.

This shielded twisted-pair cable is engineered to maintain signal integrity and minimize electromagnetic interference (EMI) across your CAN bus network. At 600mm in length, it is optimized for connecting components mounted in relatively close proximity without excessive slack, ensuring a clean and professional harness layout.

• Manufacturer Part Number: HT-130023
• Series: Haltech Elite CAN
• Connector Type: DTM-4 to DTM-4
• Length: 600mm (24 inches)
• Application: Direct plug-and-play for Haltech CAN bus expansion

The Haltech Elite CAN Cable (HT-130021) provides a high-reliability data link for your vehicle's CAN bus network. Measuring 150mm (6 inches) in length, this short-run cable is specifically designed for connecting CAN-enabled devices or daisy-chaining components while maintaining a clean, organized wiring layout.

Constructed with genuine Deutsch DTM-4 connectors, this cable ensures a secure, vibration-resistant, and weather-sealed connection suitable for performance and racing environments. It is a direct plug-and-play solution for integrating Haltech Elite series ECUs with compatible CAN expansion modules and digital displays.

• Manufacturer Part Number: HT-130021
• Length: 150mm (6 inches)
• Connector Type: DTM-4 to DTM-4
• Application: CAN bus communication and device daisy-chaining

The Haltech Elite CAN Cable (HT-130020) provides a reliable, short-run communication link designed for seamless CAN bus expansion. Measuring 75mm (3 inches) in length, this cable is ideal for clean, compact daisy-chaining of multiple CAN-enabled devices—such as wideband controllers, digital dashes, or I/O expanders—where minimizing excess wire clutter is critical.

Terminated with industry-standard DTM-4 connectors on both ends, this cable ensures a secure, vibration-resistant connection capable of withstanding the harsh environments of performance automotive applications. It is an essential component for any Haltech Elite management system requiring precise CAN network topology.

• Manufacturer Part Number: HT-130020
• Connector Type: DTM-4 to DTM-4
• Length: 75mm (3in)
• Compatibility: Haltech Elite Series and CAN-enabled accessories
• Application: CAN bus module daisy-chaining and networking

Upgrade your ignition system with the Haltech R35 Coil Conversion Bracket (HT-120100). Designed specifically for the Toyota JZ engine family, this 535mm bracket allows for the secure and precise mounting of Nissan R35 GT-R ignition coils, a popular modification for high-horsepower builds requiring more reliable spark under high boost.

This bracket fits Toyota 1JZ-GTE, 1JZ-GTE VVTi, 2JZ-GTE, and 2JZ-GTE VVTi engines. It provides a clean, professional solution for adapting modern, high-output coils to the factory cylinder head, ensuring consistent coil-on-plug contact and improved engine aesthetics compared to older, less efficient coil configurations.

• Manufacturer Part Number: HT-120100
• Overall Length: 535mm
• Engine Compatibility: Toyota 1JZ/2JZ (VVTi and non-VVTi variants)
• Application: Designed for use with Nissan R35 GT-R style ignition coils

The Haltech HC5 (HT-070306) is a professional-grade hydraulic crimping tool engineered to deliver consistent, high-pressure terminations for heavy-duty automotive electrical systems. With a 5-ton capacity, this tool provides the mechanical force necessary to create secure, low-resistance bonds that standard hand crimpers cannot achieve, ensuring maximum conductivity for critical power and ground circuits.

• Delivers 5 tons of crimping force for permanent, high-current terminations
• Versatile range suits cable sizes from 12 AWG up to 00 AWG (2/0)
• Hydraulic mechanism ensures even pressure distribution and reduces operator fatigue
• Essential for building custom battery cables, starter leads, and ground straps
• Precision-engineered by Haltech for professional wiring harness construction
• Manufacturer Part Number: HT-070306

The Haltech Dual Crimper Set (HT-070300) is a professional-grade toolkit designed for high-precision automotive wiring and ECU harness assembly. This set provides the necessary tools to achieve secure, gas-tight crimps on the various terminal types and wire gauges typically used in performance EFI systems.

The kit features two specialized crimping tools to ensure compatibility with different terminal sizes, ranging from small sensor pins to larger power leads. Also included are three precision pin removal tools, essential for safely depinning connectors during harness modifications or repairs without damaging the plastic housings. This is the exact tool set used by technicians to build and service Haltech wiring systems.

• Dual crimping tools for versatile wire gauge and terminal compatibility
• Includes 3 specialized pin removal tools for non-destructive depinning
• Professional-grade construction for consistent, high-leverage terminal crimps
• Essential for custom ECU wiring, sensor installation, and harness maintenance
• Manufacturer Part Number: HT-070300

Establish a stable, high-speed data link between your tuning laptop and engine management system with the Haltech HT-070021 USB connection cable. Specifically designed for the Haltech Nexus series, this cable features a standard USB-A connector for your computer and a USB-C connector for the device.

With a generous length of 2.0 meters (78 inches), this cable provides the necessary reach for comfortable in-car tuning sessions, data log downloads, and firmware updates without the strain of a short lead. It is built to maintain signal integrity in the demanding environment of a vehicle cabin or workshop.

• Manufacturer Part Number: HT-070021
• Connectors: USB Type-A to USB Type-C
• Length: 2.0m (78 inches)
• Application: Compatible with Haltech Nexus series units

The Haltech HT-070020 USB Connection Cable provides a reliable, high-speed link between your PC and your engine management system. Measuring 2.0 meters (78 inches), this cable offers the necessary reach for tuning from the passenger seat or workspace while maintaining a stable connection for real-time data logging and firmware updates.

Constructed to withstand the rigors of automotive environments, this USB Type A to USB Type B lead is the standard communication interface for a wide range of Haltech controllers. It serves as a direct replacement or a convenient spare for the cable originally supplied with your ECU kit.

• Length: 2.0m (approx. 78 inches)
• Interface: USB Type A to USB Type B
• Compatibility: Haltech Platinum Sprint, Platinum Sport, Platinum Pro, and Elite range ECUs
• Manufacturer Part Number: HT-070020

The Haltech HT-070013 USB Extension Cable provides a reliable communication interface for your Elite PRO Direct Plug-in ECU or IC-7 Digital Dash. This cable is engineered to extend the internal USB port to a more accessible location, allowing you to connect a laptop for real-time tuning, firmware updates, and data log retrieval without having to access the ECU enclosure or disassemble vehicle trim.

• Compatible with Haltech Elite PRO Direct Plug-in ECU series
• Compatible with Haltech IC-7 Digital Display Dashes
• Ensures stable data transfer for reliable laptop-to-ECU communication
• Manufacturer Part Number: HT-070013