The Haltech Fuel Level Sender Signal Conditioner (HT-038002) is designed to filter a resistive signal for use with an Analogue Voltage Input (AVI). This module allows performance ECUs to interpret traditional resistive fuel level sender data by converting it into a stable voltage signal.

• Filters resistive fuel sender signals for AVI compatibility
• Ensures stable and accurate fuel level data for ECU monitoring
• Includes HT-031016: A matching set of Deutsch DTM 4 connectors for secure wiring
• Manufacturer Part Number: HT-038002

The Haltech Nissan Attesa 4WD TPS Adaptor is a specialized throttle position sensor splitter harness designed for Nissan vehicles equipped with the Attesa all-wheel-drive system. This harness is an essential component when installing an aftermarket ECU, as it enables the factory Attesa controller to continue receiving a throttle signal simultaneously with the engine management system, preserving correct 4WD logic and engagement.

• Allows seamless throttle signal sharing between an aftermarket ECU and the factory Attesa controller
• Constructed with automotive-grade wiring and connectors for long-term reliability
• Critical for maintaining factory 4WD functionality on modified Nissan platforms
• Simplified installation for custom engine management setups
• Manufacturer Part Number: HT-038001

The Haltech Analogue Output Adaptor (HT-038000) is a specialized interface module designed to convert a Pulse Width Modulated (PWM) output from your ECU into a stable 0-5V analogue signal. This conversion is essential for interfacing with auxiliary modules, gauges, or factory hardware that requires a linear voltage input rather than a frequency-based duty cycle.

This adaptor is frequently used in performance drivetrains, such as interfacing with Mitsubishi Evolution X AWD controllers. By using this module, tuners can bridge the communication gap between high-speed digital outputs and sensitive analog inputs. The unit comes complete with high-quality Deutsch DTM 4 connectors to ensure a secure, weather-sealed connection in demanding automotive environments.

• Function: Converts PWM Output to a 0-5V Analogue Signal
• Included Hardware: HT-031016 matching set of Deutsch DTM 4 Connectors
• Common Application: Mitsubishi Evo 10 AWD controller interfacing
• Manufacturer Part Number: HT-038000

The Haltech DTP-4 Plug and Pin Set (HT-031201) provides a robust, high-current interconnection solution for automotive electrical systems. Utilizing the Deutsch DTP-06-4S series connector body, this 4-way set is specifically engineered for circuits that exceed the capacity of standard DT-series connectors.

• High Current Capacity: Rated for up to 25 Amps per circuit, ideal for power-hungry components.
• Connector Series: Genuine Deutsch DTP-06-4S male housing in black.
• Complete Kit: Includes the male plug housing, orange wedgelock seal for terminal retention, and the necessary female pins.
• Reliability: Designed for professional-grade wiring harness construction and secure, weather-sealed performance in harsh environments.
• Manufacturer Part Number: HT-031201

The Haltech Delphi 3-Pin Pressure Sensor Connector Kit (HT-030412) is a professional-grade wiring solution designed for EFI installations and custom harness construction. This kit provides a secure, weather-sealed interface for 3-pin Delphi-style pressure sensors, typically used for monitoring oil, fuel, or manifold absolute pressure (MAP).

• Durable Construction: Engineered to withstand the high-vibration and high-temperature environments of an engine bay.
• Complete Set: Includes the 3-pin Delphi-style connector housing and the high-conductivity terminal pins required for a reliable electrical termination.
• Professional Finish: Ideal for tuners and builders looking to maintain an OEM-quality finish on custom sensor looms.
• Manufacturer Part Number: HT-030412

Whether you are replacing a damaged factory plug or pinning a new sensor into a standalone engine management system, this Haltech connector ensures a stable signal path for critical engine data.

Ensure a reliable and secure electrical connection for your engine monitoring system with the Haltech HT-030315 connector kit. This kit is specifically designed to fit Bosch 150psi fluid pressure and temperature sensors (such as Haltech HT-010920), providing a professional-grade termination for oil, fuel, or coolant monitoring applications.

Constructed to handle the vibration and heat of a performance engine bay, this kit includes everything needed to repair a damaged harness or finish a custom wiring project. The included weather seals ensure a moisture-resistant connection to protect signal integrity for critical EFI data.

• Manufacturer Part Number: HT-030315
• Compatible Sensor: Suits Bosch 150psi Fluid Pressure and Temperature Sensor (HT-010920)
• Components Included: Connector housing, crimp terminals, and wire seals
• Application: Pressure and temperature sensor wiring

The Haltech 6-Circuit Fuse Box (HT-030102) is a compact and essential component for managing power distribution in custom automotive electrical systems. Whether you are wiring a standalone ECU, adding performance accessories, or tidying up a race car harness, this unit provides a centralized, fused hub to protect your sensitive electronics.

Constructed for durability and professional-grade installation, the fuse box features a secure snap-on lid to shield fuses from dust and debris. This kit eliminates messy inline fuse holders, allowing for a cleaner, more serviceable layout in the engine bay or cabin. The package includes all necessary terminal pins required to secure your wiring into the base.

• Manufacturer Part Number: HT-030102
• Capacity: Supports up to 6 individual circuits
• Includes: Fuse box base, protective lid, and required terminal pins
• Application: Universal power distribution for EFI, lighting, and accessories
• Material: High-temperature plastic housing designed for automotive environments

These genuine Haltech replacement ECU pins are designed specifically for the Tyco 8-32 pin connector range used across various engine management systems and custom wiring harnesses. They are essential for technicians and DIY builders adding new sensors, auxiliary outputs, or repairing damaged terminals within an existing loom.

• Compatibility: Suits Tyco 8-32 Pin Connector Range
• Quantity: Pack of 10 pins
• Application: ECU terminal crimping, harness repair, and loom construction
• Connector Type: Tyco
• Manufacturer Part Number: HT-030051

Maintain reliable electrical integrity in your engine management system with this pack of 10 genuine Haltech AMP Superseal ECU pins. These terminals are the industry standard for securing high-quality, low-resistance connections within the ECU connector housing, whether you are building a custom wiring harness from scratch or performing essential repairs.

Specifically engineered for the AMP Superseal series, these pins provide a precise fit and secure retention in the connector block. They are compatible with a wide range of Haltech hardware, including legacy systems and modern modular units.

• Fitment: Suits 26-pin 2-row and 26/34-pin 4-row AMP connector ranges
• Vehicle/ECU Compatibility: Includes Haltech E6X and related AMP-based systems
• Contents: Pack of 10 individual pins
• Manufacturer Part Number: HT-030050

The Haltech HT-030032 is a high-current SurLok connector engineered for reliable power distribution in advanced automotive wiring systems. This 120A rated connector provides a secure, low-resistance interface specifically designed for the Haltech NEXUS R3 and PD16 power distribution modules.

• Continuous Current Rating: 120A
• Color Coding: Red for quick identification of positive power circuits
• Compatibility: Direct fit for Haltech NEXUS R3 and PD16 power distribution blocks
• Connection Type: SurLok locking mechanism for vibration resistance
• Manufacturer Part Number: HT-030032

Built to withstand the demands of motorsport environments, the SurLok design ensures a positive lock that maintains electrical integrity even under heavy vibration. It is an essential component for high-amperage circuit integration within the NEXUS ecosystem.

Construct a custom, professional-grade wiring harness for your Haltech NEXUS R3 with this essential Plug and Pin kit. Designed specifically for tuners and builders creating a bespoke loom from scratch, this kit provides the critical hardware required to interface with the NEXUS R3 Vehicle Control Unit (VCU).

• Includes all primary connector housings for the NEXUS R3 VCU
• Full set of precision-stamped crimp pins for secure signal and power delivery
• Automotive-grade materials designed to withstand heat and vibration
• Ideal for clean-sheet motorsport wiring and custom EFI conversions
• Manufacturer Part Number: HT-030013

By utilizing this genuine Haltech connector kit, you ensure a reliable, vibration-resistant connection for all sensor inputs and PDM outputs. This kit is intended for users who have the necessary crimping tools and wiring expertise to terminate their own harness without relying on a pre-made flying lead loom.

The Haltech HT-030011 is a professional-grade AMP Superseal 34-pin connector plug designed for reliable, weatherproof electrical connections in demanding automotive environments. This 4-row connector utilizes Key 2 indexing to ensure precise orientation and prevent accidental cross-connection during installation or maintenance.

Ideal for custom EFI wiring, ECU harness construction, or repairing damaged terminations, this kit provides the robust plastic connector housing and the necessary terminal pins required for a complete, secure assembly. The Superseal design ensures a high level of resistance against moisture, dust, and vibration.

• Manufacturer Part Number: HT-030011
• Connector Type: 34-Pin AMP Superseal
• Pin Configuration: 4-Row
• Indexing: Key 2
• Includes: Connector housing and terminal pins
• Applications: Haltech ECU systems and custom engine wiring harnesses

The Haltech HT-030009 is a genuine AMP Superseal 34-pin connector kit designed for professional wiring, repairs, or custom harness construction. This 4-row plug features a 3-keyway configuration to ensure secure, correctly indexed orientation when mating with your ECU or dash unit.

This kit provides the essential interface for a wide range of Haltech hardware, serving as either the primary or secondary connector depending on the device. It includes both the connector housing and the necessary terminal pins for a complete installation.

• Manufacturer Part Number: HT-030009
• Connector Type: AMP Superseal 34-Pin, 4-Row
• Keyway: 3-Keyway indexing
• Compatibility: Haltech Nexus PD16, Elite 550/750/950, and IQ3 Street Dashes. Also fits as the large connector for Nexus R5, Elite 1000/1500/2000/2500, PS1000/2000, and E8/E11 ECUs.
• Included: (1) 34-pin connector plug and terminal pins

Suits Haltech IO12 Expander Box, WBC1 and WBC2 Wideband Controllers, and Device Emulator 8.

The Haltech HT-030007 is a complete connector kit designed for building or repairing wiring harnesses for Haltech expansion modules. This kit features a genuine Tyco 24-pin housing, engineered for secure, vibration-resistant connectivity in demanding automotive environments.

This kit provides the necessary components for professional-grade terminations, whether you are integrating a wideband controller or expanding your ECU's I/O capabilities. It includes a single 24-pin plug housing and a full set of 24 pins to ensure every cavity can be populated.

• Manufacturer Part Number: HT-030007
• Connector Type: 24-Pin Tyco
• Includes: (1) Connector housing and (24) terminal pins
• Application: IO12 Expander Box, WBC1/WBC2 Wideband Controllers, Device Emulator 8

The Haltech HT-030006 is a complete 16-pin TYCO connector kit designed for wiring auxiliary input and output circuits on select Haltech engine management systems. This kit is essential for users looking to expand their ECU's capabilities, allowing for the integration of additional sensors, solenoids, or data logging inputs using genuine TYCO components for a secure, automotive-grade connection.

• Compatible Systems: Fits Haltech Platinum PRO Plug-in Auxiliary I/O, Platinum Sport GM Plug-in Auxiliary I/O, TCA 2 and TCA 4, and Elite 750 Plug 'n' Play Adaptor Harness Auxiliary I/O.
• Reliable Connection: Uses industry-standard TYCO 16-pin housing to ensure vibration-resistant terminal retention in high-performance environments.
• Complete Kit: Includes the 16-pin connector housing and a pack of 16 high-quality terminal pins.
• Manufacturer Part Number: HT-030006

The Haltech HT-030001 Superseal connector set provides the specific 26-pin and 34-pin 4-row housings and terminals required for professional wiring or harness repair on high-performance engine management systems. Designed with a 3-keyway indexing system, these connectors ensure a secure, indexed fit that prevents cross-connection during installation.

This kit is essential for tuners and fabricators building custom wiring looms from scratch or repinning existing harnesses for a wide range of Haltech ECU platforms. The high-density AMP Superseal design provides a reliable, weather-resistant connection for critical sensor and ignition signals in demanding automotive environments.

• Compatible ECUs: Haltech E8, E11, Platinum Sport 1000, Platinum Sport 2000, and Elite series (1000, 1500, 2000, and 2500).
• Connector Type: AMP Superseal 4-row with 3-keyway indexing.
• Configuration: 26-pin and 34-pin plug housings.
• Includes: Both connector plugs and a complete set of matching crimp pins.
• Manufacturer Part Number: HT-030001

The Haltech HT-020401 4-Port Boost Control Solenoid provides precise manifold pressure management for high-performance turbocharged applications. Unlike a standard 3-port solenoid, this 4-port configuration allows for a much wider range of boost control, making it ideal for setups requiring very low wastegate spring pressure while still achieving high peak boost levels.

• Configuration: 4-port solenoid for advanced dual-port wastegate control
• Thread Pitch: 1/8 NPT inlet and outlet ports
• Operating Frequency: Optimized for 33Hz (PWM)
• Compatibility: Designed for use with Haltech Elite and Nexus series or other standalone ECUs
• Manufacturer Part Number: HT-020401

This solenoid is an essential component for racers using CO2 or manifold pressure to control the top port of the wastegate, ensuring stable and repeatable boost targets throughout the RPM range.

The Haltech HT-020400 is a high-performance 3-port boost control solenoid designed for precise wastegate management in turbocharged applications. This solenoid operates at a 33Hz frequency, providing the responsive control necessary for stable boost curves and fine-tuned manifold pressure when managed by an aftermarket ECU.

Designed for professional-grade installation, the kit includes a rubber-isolated mount to protect the solenoid from engine harmonics and vibration. It also features a complete set of Deutsch DTM-2 connectors to ensure a secure, moisture-resistant electrical connection in the engine bay.

• Configuration: 3-Port Solenoid
• Thread Size: 1/8 NPT
• Frequency: 33Hz
• Electrical: Includes matching Set of Deutsch DTM-2 Connectors (HT-031012)
• Hardware: Hose fittings and rubber isolated mount included
• Manufacturer Part Number: HT-020400

The Haltech HT-020305 Idle Air Control (IAC) Kit provides a complete remote-mount solution for precise idle speed management in EFI applications. The heart of the kit is a CNC-machined billet aluminum 2-port housing designed for durability and consistent airflow bypass. This housing pairs with a reliable 2-screw style stepper motor to ensure stable engine idling across varying temperature and load conditions.

This kit is an ideal choice for custom intake manifolds or throttle bodies that lack integrated idle control valves. By using a remote-mounted setup, you can maintain a clean engine bay while retaining the cold-start and load-compensation benefits of an active IAC system. Each kit comes complete with the necessary electrical connectors to ensure a secure, professional-grade wiring integration.

• Manufacturer Part Number: HT-020305
• Housing Material: Billet Aluminum
• Port Configuration: 2-Port
• Motor Type: 2-Screw Style Stepper
• Includes: Billet housing, stepper motor, matching electrical plugs, and pins

The Haltech High Output IGN-1A Inductive Coil (HT-020114) is a high-performance "smart coil" designed for demanding engine applications that require superior spark energy. Featuring an integrated ignitor module, this coil eliminates the need for an external ignition power stage or CDI, simplifying your wiring while providing robust ignition performance.

Engineered for reliability under high cylinder pressures, the IGN-1A delivers a powerful, long-duration spark to ensure complete combustion. Each coil comes complete with the necessary electrical components for a professional-grade installation on custom wiring harnesses.

• High Output: Optimized inductive operation for high-performance ignition.
• Integrated Ignitor: Built-in module for direct ECU triggering.
• Complete Kit: Includes matching connector plug and terminal pins.
• Manufacturer Part Number: HT-020114

The Haltech Hitachi R35 Ignition Coil provides a high-output spark solution for performance engines requiring consistent ignition under high cylinder pressures. This genuine Hitachi coil features an integrated ignitor, allowing for a direct trigger from your aftermarket ECU without the need for an external ignition module. The HT-020106 kit is a favorite for custom coil-on-plug conversions due to its reliable dwell characteristics and compact form factor.

• High-output R35-spec ignition coil for superior spark energy
• Integrated internal ignitor for simplified wiring and direct ECU control
• Genuine Hitachi component for maximum durability and reliability
• Includes 3-pin connector plug and terminal pins for a professional installation
• Manufacturer Part Number: HT-020106

The Haltech TMS-4 Tire Monitoring System (TPMS) provides real-time data for both tire pressure and temperature, allowing for precise chassis tuning and enhanced safety on the track or street. Designed to integrate seamlessly with Haltech engine management systems via the CAN bus, this kit (HT-011601) utilizes four external sensors that screw directly onto standard valve stems, eliminating the need for tire dismounting during installation.

• Includes four external screw-on sensors for rapid installation
• Monitors both tire pressure and internal air temperature in real-time
• Connects directly to Haltech CAN bus networks for data logging and display
• Enables user-defined warnings and safety triggers within the ECU
• Compact design suitable for various wheel and valve stem configurations
• Manufacturer Part Number: HT-011601

Monitor your contact patch with professional-grade precision using the Haltech TMS-4 Tire Pressure Monitoring System. Designed for high-performance applications, this kit provides real-time pressure and temperature data directly to your Haltech ECU or dash display via the CAN bus. By tracking live tire data, you can implement engine protection strategies or refine chassis setups based on actual carcass temperature and pressure fluctuations.

The TMS-4 utilizes internal sensors that mount securely inside the wheel. Unlike external cap sensors, these are protected from track debris, centrifugal force at high speeds, and environmental damage. This system is an essential tool for drag racing, circuit use, or high-performance street builds where maintaining optimal tire health is critical for both safety and traction.

• Includes 4 internal tire pressure and temperature sensors
• Seamless integration with Haltech NEXUS and Elite series ECUs via CAN bus
• Real-time monitoring helps prevent tire failure and optimizes grip levels
• Internal mounting provides superior protection and cleaner wheel aesthetics
• Manufacturer Part Number: HT-011600

Simplify your vehicle's cockpit wiring and switchgear with the Haltech 15-button CAN keypad. Designed for professional motorsport and high-end street builds, this 3x5 grid interface communicates directly over the CAN-bus network to control your ECU and PDM functions. This eliminates the need for individual signal wires for every switch, reducing harness complexity and weight.

• 15 programmable inputs in a compact 3x5 button configuration
• Integrated amber backlighting for visibility in low-light conditions
• Reliable CAN-bus communication for seamless Haltech ecosystem integration
• Rugged construction designed for automotive environments
• Manufacturer Part Number: HT-011502

Streamline your cockpit controls with the Haltech 8-Button CAN Keypad (2x4). Designed for seamless integration with Haltech ECUs and compatible CAN-bus systems, this keypad replaces bulky traditional switch panels with a compact, rugged interface. By utilizing the CAN network, it significantly reduces wiring complexity, requiring only a simple connection to your existing bus rather than multiple individual switch runs.

This unit features a 2x4 layout with 8 tactile, user-programmable inputs, allowing you to trigger boost maps, nitrous stages, traction control, or lighting with precision. The amber backlighting ensures clear visibility in low-light racing environments, providing a professional and functional finish to any motorsport electrical system.

• Manufacturer Part Number: HT-011501
• Configuration: 8 Buttons (2x4 Matrix)
• Communication: CAN-bus protocol
• Backlight Color: Amber
• Tactile feedback for reliable operation in high-vibration environments
• Reduces chassis wiring weight and complexity

Organize and clearly identify your custom vehicle controls with the Haltech HT-011500 CAN Keypad Label Set. This comprehensive kit provides a professional finish for any installation utilizing Haltech CAN-based keypads, ensuring critical functions are easily visible at a glance.

• Includes 140 individual high-contrast labels covering a wide range of automotive and motorsport functions.
• Designed for precise fitment on Haltech CAN keypad buttons.
• Ideal for identifying cooling fans, fuel pumps, nitrous stages, boost maps, and lighting controls.
• Durable construction to withstand the rigors of a performance cockpit environment.
• Manufacturer Part Number: HT-011500

Ensure consistent wireless connectivity for your Haltech Nexus Series VCU with this dedicated 2.4GHz glass-mount Wi-Fi antenna. This antenna is designed to move the Wi-Fi reception point away from the ECU mounting location, which is often buried under the dash or behind metal panels, to a position with a clear line-of-sight for better signal strength during tuning and data monitoring.

Featuring a 1.5-meter lead, this antenna provides sufficient length for professional routing and clean installation in most vehicle cabins. The adhesive-backed glass mount ensures a secure fitment to the windshield or rear glass for optimal performance.

• Product Type: Wi-Fi Antenna
• Frequency: 2.4GHz
• Mounting Style: Glass Mount (Adhesive)
• Lead Length: 1.5m
• Compatibility: Haltech Nexus Series
• Manufacturer Part Number: HT-011401

The Haltech GPS Speed Input Module (HT-011310) provides a highly accurate vehicle speed signal using GPS satellite data, eliminating the need for traditional mechanical or electronic transmission sensors. This module is the ideal solution for vehicles with drivetrain swaps, non-standard tire sizes, or those lacking a factory speed sensor.

By utilizing GPS data, the module generates a stable pulsed output signal that can be wired directly into a digital dashboard or ECU speed input. This ensures precise speed tracking and odometer functionality regardless of gear ratios or wheel diameter changes.

• Manufacturer Part Number: HT-011310
• Output: Pulsed output signal (+/-)
• Connector Type: DTM-3
• Includes: GPS module, matching male DTM-3 connector, and pins

The Haltech HT-011202 Linear Position Sensor is a high-precision analog potentiometer designed for critical data acquisition in demanding motorsport environments. This sensor features a 100mm (approximately 4 inches) travel range, making it the ideal solution for monitoring suspension displacement, steering angle, or throttle position.

Housed in a compact 1/2-inch body, this sensor is engineered to provide accurate, repeatable linear feedback to your ECU or data logger. The rod-end mounting style allows for secure attachment to control arms, dampers, or custom linkages, ensuring precise measurement of mechanical movement during high-performance driving.

• Manufacturer Part Number: HT-011202
• Travel Range: 100mm (3.94 in)
• Body Diameter: 1/2 inch
• Sensor Type: Linear Potentiometer
• Output: Analog signal for precise data logging
• Applications: Suspension travel, steering angle, and aero height monitoring

Protect your engine from the catastrophic effects of detonation with the Haltech HT-011100 Genuine Bosch Knock Sensor. This high-precision sensor is designed to monitor engine block vibrations and detect the specific frequencies associated with knock, providing critical feedback to your ECU to safely retard ignition timing and prevent internal component damage.

Built by Bosch for maximum reliability in high-vibration environments, this sensor features a 100% genuine Bosch element integrated into a durable housing. It is designed for universal fitment on engines using an 8mm (5/16 in.) mounting bolt, making it an ideal choice for both OEM replacements and custom high-performance builds. This kit is a complete solution for clean installation, including the required matching connector plug and two terminal pins to ensure a secure, weather-tight electrical connection to your wiring harness.

• Manufacturer Part Number: HT-011100
• Sensor Type: Genuine Bosch Knock Sensor (Donut style)
• Mounting Interface: 8mm (5/16 in.) through-hole
• Includes: Matching connector housing and 2 electrical pins
• Function: High-sensitivity acoustic vibration detection for EFI tuning