The Injector Dynamics 1750-XDS provides precise fuel delivery for high-performance applications where consistency and control are critical. As part of the XDS series, these injectors feature advanced internal geometry that improves flow stability and atomization across a wide range of pulse widths. This ensures smooth idle and predictable part-throttle behavior even in high-horsepower builds.

• Manufacturer Part Number: 1750-XDS
• Quantity: Matched Set of 2
• Injector Length: 34mm (O-ring to O-ring)
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Engineered for compatibility with various fuel types including gasoline and E85
• Precision-matched flow rates for consistent cylinder-to-cylinder performance

These compact 34mm injectors are designed to fit specific fuel rail configurations and replace worn or underperforming OE injectors. Each set is flow-tested to ensure tight tolerances, providing tuners with the accurate data needed for optimized engine management.

The Injector Dynamics 1750-XDS provides precise fuel delivery for high-performance engines requiring high flow rates without sacrificing low-pulse-width stability. As part of the XDS series, these injectors feature a corrosion-resistant internal construction, making them fully compatible with all known automotive fuels, including ethanol-based blends like E85. This set of four is flow-matched to tight tolerances, ensuring consistent cylinder-to-cylinder combustion and improved tuning accuracy.

Designed for easy installation into compatible fuel rails, these injectors feature a standard 60mm length and 14mm O-rings on both the upper and lower seals. The purple tops serve as a distinct identifier for the 1750-XDS series, signifying a component engineered for demanding forced induction or high-horsepower naturally aspirated builds.

• Series: 1750-XDS
• Quantity: Set of 4
• Length: 60mm (O-ring to O-ring)
• Upper O-Ring: 14mm (Purple Top)
• Lower O-Ring: 14mm
• Fuel Compatibility: All known automotive fuels including E85
• Matching: Precision flow-matched set

Upgrade your fueling system with the Injector Dynamics 1300-XDS series, engineered for high-performance applications that demand precision and durability. These injectors feature corrosion-resistant stainless steel internals, making them fully compatible with all known automotive fuels, including pump gas, E85, and methanol. The 1300-XDS provides exceptional idle quality and consistency, bridging the gap between the ID1050x and ID1700x for builds requiring higher flow rates without sacrificing driveability.

• Series: 1300-XDS
• Configuration: 55mm Length (O-ring to O-ring)
• Inlet: 11mm Machine Top
• Adaptor: 34.55 D Adaptor
• Quantity: Set of 3
• Materials: Stainless steel internals for alternative fuel compatibility
• Performance: Flow-matched sets for precise cylinder-to-cylinder fuel distribution

Each set is matched to provide the linear flow and low-pulse-width repeatability necessary for professional-grade tuning. This specific configuration includes the 34.55 D adaptors for seamless integration into compatible fuel rails.

Upgrade your BMW M54 fuel system with this set of six Injector Dynamics ID1050X fuel injectors, engineered for precision flow and high-output reliability. The ID1050X is a performance-oriented injector that provides exceptional idle quality and low-pulse-width control, making it suitable for high-horsepower builds that still require smooth drivability. These injectors feature corrosion-resistant internals, making them fully compatible with all known fuels, including E85.

This kit is specifically configured for the M54 engine, featuring 14mm purple top adapters and black bottom adapters for a secure fit into the fuel rail and intake manifold. Every set is flow-matched to tight tolerances to ensure consistent fuel delivery across all cylinders, reducing the risk of lean conditions under load.

• Product Line: Injector Dynamics ID1050X
• Engine Compatibility: BMW M54
• Adapter Specs: 14mm Top (Purple) and Black Bottom Adapters
• Quantity: Set of 6
• Internals: Bosch Motorsport based with all-stainless construction
• Fuel Compatibility: Gasoline, Ethanol (E85), Methanol

Injector Dynamics 1750-XDS fuel injectors provide high-flow performance without sacrificing the low-pulse-width stability required for consistent idle and drivability. The XDS series features a corrosion-resistant internal construction, making these injectors fully compatible with all known automotive fuels, including gasoline, E85, and alcohol-based blends.

This matched set of eight is configured for a 60mm length and utilizes 14mm purple top adapters to fit standard fuel rail bores. Each injector is flow-tested and matched across the entire pulse width range to ensure precise cylinder-to-cylinder fuel delivery, which is critical for engine safety and tuning accuracy in high-horsepower applications.

• Manufacturer Part Number: 1750.60.14.14.8
• Series: 1750-XDS
• Quantity: Set of 8
• Length: 60mm (O-ring to O-ring)
• Top O-Ring: 14mm (Purple Adapter)
• Lower O-Ring: 14mm
• Fuel Compatibility: Gasoline, E85, Ethanol, Methanol
• High-impedance design compatible with most factory and aftermarket ECUs

Fits Mazda Miata models requiring 11mm fuel rail adaptors and -204 lower cushions.

This set of four Injector Dynamics ID1050-XDS fuel injectors provides precision fueling for high-performance Mazda Miata builds. The ID1050-XDS series is engineered to deliver exceptional flow consistency and reliability, featuring internal components designed for longevity and corrosion resistance. These injectors are specifically configured to interface with the fuel rail and intake manifold using the included hardware for a professional-grade fitment.

• Brand: Injector Dynamics
• Series: ID1050-XDS
• Application: Mazda Miata
• Adaptors: 11mm (Blue)
• Lower Cushions: -204
• Quantity: Set of 4

Injector Dynamics 1750-XDS fuel injectors provide precise fuel delivery for high-performance engines requiring significant flow rates. The 1750-XDS series is engineered for exceptional low-flow stability, ensuring smooth idling and consistent part-throttle transitions that are often difficult to achieve with large-displacement injectors. Built with internal components highly resistant to corrosion, these injectors are fully compatible with all known automotive fuels, including E85 and methanol.

This set of six injectors is flow-matched to provide uniform cylinder-to-cylinder fuel distribution, protecting your engine under high-load conditions. The 60mm length is a standard fitment for many common performance fuel rails, while the 11mm blue top adapter and 14mm lower o-ring provide a secure, leak-free seal.

• Manufacturer Part Number: 1750-XDS
• Quantity: Set of 6 flow-matched injectors
• Length: 60mm (O-ring to O-ring)
• Top O-Ring: 11mm (Blue Adapter)
• Lower O-Ring: 14mm
• Fuel Compatibility: Safe for E85, Methanol, and Gasoline

The Injector Dynamics 1750-XDS is a high-performance fuel delivery solution designed to bridge the gap between the ID1300-X and ID2600-XDS. Built to withstand the rigors of extreme fuel environments, these injectors feature corrosion-resistant stainless steel internals, making them fully compatible with all known automotive fuels including Ethanol, E85, and Methanol. The 1750-XDS series is engineered to provide exceptional idle and cruise behavior without sacrificing the high-flow overhead required for forced induction and high-horsepower engines.

• Manufacturer: Injector Dynamics
• Series: 1750-XDS
• Length: 60mm (O-ring to O-ring)
• Upper O-Ring: 14mm (Grey Top)
• Lower O-Ring: 14mm
• Quantity: Matched set of 4
• Construction: Corrosion-resistant internals
• Fuel Compatibility: Gasoline, Ethanol, E85, Methanol

Each set is closely matched by flow rate and battery offset to ensure cylinder-to-cylinder consistency. This precision characterization provides the necessary data for seamless integration with modern engine management systems, allowing for easier tuning and more reliable performance.

Adjust your fuel injector's effective height with the Injector Dynamics +26mm Bottom Adapter. This extension is engineered to modify the length of the injector to suit specific intake manifold or fuel rail spacing requirements without compromising seal integrity or fuel flow. It serves as a critical component when adapting high-performance injectors to fit non-standard or custom engine configurations.

CNC-machined for precise tolerances, this adapter adds exactly 26mm of height to the discharge end of the injector. It utilizes a 14mm lower o-ring to ensure a leak-free seal in standard fuel rail bores. The blue anodized finish provides durable corrosion resistance and allows for quick identification during assembly or maintenance.

• Brand: Injector Dynamics
• Extension Length: +26mm
• Lower O-Ring Size: 14mm
• Finish: Blue Anodized
• Compatibility: Designed for use with Injector Dynamics series injectors

Injector Dynamics 1050-XDS fuel injectors are engineered for precision and consistency, providing high-flow performance without sacrificing idle quality. These injectors are the standard for tuners and builders who require accurate fuel delivery across the entire duty cycle, specifically designed to handle the demands of modern high-performance engines.

This set of three injectors features a 55mm length and is equipped with 11mm machined tops to ensure a secure, high-pressure seal in the fuel rail. The included 34.55 D adaptors provide the necessary spacing and fitment for specific manifold configurations, allowing for a straightforward installation that maintains the correct spray pattern and orientation.

• Brand: Injector Dynamics
• Series: 1050-XDS
• Part Configuration: 55mm Length with 11mm Machine Top
• Adaptor: 34.55 D Adaptor included
• Quantity: Matched Set of 3

Fits Dodge 300C SRT-8 (6.4L).

Engineered for high-output applications, this set of eight Injector Dynamics 1750-XDS fuel injectors provides precision fuel delivery and exceptional atomization for the 6.4L HEMI engine. The 1750-XDS series is designed to handle a wide range of fuel types, including corrosive fuels like E85, while maintaining consistent performance across various pulse widths. Each injector comes equipped with a 14mm black bottom adaptor to ensure a secure, vehicle-specific fit in the lower intake or fuel rail port.

• Brand: Injector Dynamics
• Series: 1750-XDS
• Adaptor Size: 14mm (Bottom)
• Adaptor Finish: Black
• Vehicle Fitment: Dodge 300C SRT-8 (6.4L)
• Quantity: Set of 8

Fits 2009-Up Hyundai Genesis models. These Injector Dynamics 1750-XDS fuel injectors are engineered to provide precise fuel delivery for high-performance builds, specifically those requiring high flow rates for forced induction or racing applications. The 1750-XDS series is an evolution of the ID1700-X, featuring upgraded internals with materials designed to resist corrosion from alcohol-based fuels.

This set of six injectors is flow-matched to tight tolerances, ensuring balanced cylinder-to-cylinder performance and consistent fueling under heavy load. The 14mm lower o-ring design ensures a reliable, drop-in seal for the fuel rail, making these an essential upgrade for Genesis owners transitioning to E85 or high-boost setups.

• Manufacturer Part Number: 1750.60.14.14.6
• Flow Rate: 1750cc/min at 3.0 bar (43.5 psi)
• Lower O-Ring Size: 14mm
• Fuel Compatibility: Gasoline, Methanol, and Ethanol (E85)
• Quantity: Matched set of 6 injectors
• Corrosion-resistant internal components

The Injector Dynamics 1750-XDS provides high-performance fuel delivery with the precision required for advanced engine tuning. These injectors are engineered to maintain stable flow rates and consistent atomization, ensuring balanced performance across all cylinders. Designed for durability and accuracy, the 1750-XDS series is a standard-setter for high-output fuel systems.

• Brand: Injector Dynamics
• Series: 1750-XDS
• Configuration: Set of 6
• Overall Length: 48mm
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm

The Injector Dynamics 1750-XDS series delivers high-output fueling with the precision and control required for performance tuning. This set of four injectors is engineered to bridge the gap between the ID1300x and ID2600-xds, providing a high-flow solution that maintains excellent idle and cruise behavior. Each unit features a 60mm length and an 11mm blue top, utilizing a Denso lower cushion for a secure, leak-free seal in compatible intake manifolds.

Built to handle the demands of forced induction and high-horsepower builds, these injectors are compatible with all known automotive fuels, including E85. Every set is matched by flow rate and dead time to ensure consistent cylinder-to-cylinder performance, simplifying the tuning process and improving engine safety.

• Brand: Injector Dynamics
• Series: 1750-XDS
• Quantity: Set of 4
• Length: 60mm (O-ring to O-ring)
• Top Diameter: 11mm (Blue Top)
• Lower Seal: Denso Lower Cushion
• Compatibility: Compatible with all known fuels including E85

Injector Dynamics 1750-XDS fuel injectors are engineered to provide high-flow performance without compromising low-flow stability. Designed for compatibility with all known fuels, including ethanol-based fuels like E85, these injectors are built to handle the demands of high-output forced induction builds while maintaining exceptional idle and cruise characteristics.

• Series: 1750-XDS
• Length: 48mm
• Top Configuration: 11mm Machined Top (WRX Spec)
• Cushion Style: Denso Low Cushion
• Quantity: Matched Set of 4

Each set is precision-matched to ensure uniform fuel delivery across all cylinders, simplifying the tuning process and protecting your engine. The XDS series features a revised internal geometry for improved resistance to corrosion and fuel deposits compared to previous generations.

Fits Audi and VW vehicles equipped with the VR6 12-valve engine. This set of six Injector Dynamics ID1300X injectors is the performance standard for high-output fueling, featuring 14mm grey tops and silver bottoms for precise fitment into the VR6 12V fuel rail and manifold.

The ID1300X was developed in partnership with Bosch as an all-fuel compatible solution. Unlike many high-flow injectors, the ID1300X features all-stainless steel internals, making it fully resistant to the corrosive nature of E85 and other ethanol-based fuels while remaining perfectly suited for gasoline. Each set is pressure-tested and flow-matched to ensure exceptional cylinder-to-cylinder consistency and idle quality.

• Corrosion-resistant all-stainless steel internal components
• Fully compatible with E85, Ethanol, and Gasoline
• 14mm grey top and silver bottom adapter configuration
• High-impedance design for compatibility with most ECU drivers
• Flow-matched set of 6 injectors for consistent fuel delivery

Ensure your high-performance fuel system can meet the demands of high-boost or ethanol-based applications with this set of five Injector Dynamics 2600cc injectors. Engineered for extreme flow requirements, these injectors provide the precise metering and atomization necessary for stable idling and consistent wide-open throttle performance.

This configuration features a 34mm overall length (without adapters) and a 14mm lower o-ring, designed for specific fuel rail and intake manifold depths. Each injector is part of a flow-matched set to ensure balanced cylinder-to-cylinder fuel delivery, essential for protecting your engine under heavy load. The high-impedance design makes them compatible with most modern ECUs.

• Manufacturer Part Number: 2600.34.14.14.5
• Flow Rate: 2600cc/min
• Length: 34mm (No Adapters)
• Lower O-Ring: 14mm
• Quantity: Set of 5 matched injectors

Maintain the integrity of your fuel system with this Injector Dynamics O-Ring and Seal Service Kit. Specifically engineered for injectors utilizing an 11mm top adapter and a WRX bottom adapter, this kit provides a complete set of replacement seals essential for injector maintenance or reinstallation. Proper sealing at the fuel rail and intake manifold is critical to preventing vacuum leaks and hazardous fuel spray.

• Genuine Injector Dynamics replacement components
• Designed for injectors with 11mm top adapters and WRX-style bottom adapters
• High-grade elastomers compatible with modern fuel types
• Includes all necessary O-rings and seals for a complete service
• Manufacturer Part Number: SK.48.11.WRX

The Injector Dynamics Metal Retention Clip is a precise replacement component designed to secure electrical adapter tops to the injector body. Engineered for the rigors of high-performance fuel systems, this clip provides the necessary tension to maintain a stable connection, preventing accidental disconnection due to engine vibration or thermal expansion.

• Authentic Injector Dynamics replacement hardware
• Maintains secure contact between adapter top and injector
• High-strength metal construction for durability in high-heat environments
• Manufacturer Part Number: 92.9

The Injector Dynamics 1050X is the evolution of the industry-leading ID1000, redesigned to offer improved internal components and greater resistance to corrosion. These high-performance injectors are engineered to provide exceptional flow consistency and precise fuel delivery across all pulse widths, making them the standard for forced induction and high-output naturally aspirated applications.

This set comes equipped with 14mm grey top adapters and silver bottom adapters to meet specific fuel rail and manifold height requirements. Each set is flow-matched to extremely tight tolerances, ensuring your engine receives balanced fueling across all cylinders for maximum safety and tuning stability.

• Manufacturer Part Number: 1050.60.14.14B.6
• Series: 1050X
• Adapter Top: 14mm (Grey)
• Adapter Bottom: Silver
• Quantity: Set of 6 flow-matched injectors
• Fuel Compatibility: Compatible with all known fuels including E85 and alcohol-based fuels

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, re-engineered from the ground up to provide exceptional idle and cruise behavior while supporting the high flow rates required for forced induction and performance builds. This set of four injectors includes 11mm blue adapters to ensure a secure fit and proper alignment within the fuel rail.

Built with corrosion-resistant internals, the ID1050X is fully compatible with all known automotive fuels, including ethanol and E85. Each injector is part of a flow-matched set, delivering the precise fuel metering and consistency necessary for modern ECU tuning. As high-impedance units, they interface directly with factory and aftermarket engine management systems without the need for additional resistor boxes.

• Manufacturer Part Number: 1050.60.11.14.4
• Adapter Size: 11mm (Blue)
• Quantity: Set of 4
• Compatibility: All known automotive fuels (Gasoline, Ethanol, E85)
• Design: High-impedance with corrosion-resistant internal components

The Injector Dynamics WRX-16B bottom adapter is a precision-engineered solution for Subaru WRX owners upgrading to high-performance fuel injectors. This component allows for the installation of standard 14mm fuel injectors into intake manifolds designed for 16mm injector seats, ensuring a reliable and secure seal within the manifold bore.

By utilizing this adapter, you eliminate the risk of vacuum leaks or fuel spray issues common with poorly fitting hardware. It is built to the tight tolerances required for high-pressure fuel systems, providing a direct-fit solution that maintains the integrity of your fueling setup during spirited driving or high-boost applications.

• Adapts 14mm injector discharge to 16mm manifold seats
• Designed specifically for Subaru WRX fitment
• Ensures airtight sealing for consistent fuel pressure
• Manufacturer Part Number: WRX-16B

This individual electrical terminal from Injector Dynamics is designed specifically for USCAR-style fuel injector connectors. It is an essential component for technicians and enthusiasts building custom EFI wiring harnesses or performing precision repairs on existing fuel injector leads.

• Compatible with USCAR and EV6-style injector connector housings
• High-conductivity metallic construction ensures a reliable electrical connection
• Ideal for custom harness fabrication and pin replacements
• Sold individually to meet specific project requirements
• Manufacturer Part Number: USCAR TERMINAL

Maintain the integrity of your fuel system with the Injector Dynamics SK.60.11.D O-Ring and Seal Service Kit. This professional-grade kit provides the necessary replacement components for injectors configured with an 11mm top adapter and a Denso-style lower cushion, ensuring a reliable, leak-free interface between the fuel rail and the intake manifold.

• Manufacturer Part Number: SK.60.11.D
• Engineered for 11mm top adapter configurations
• Includes specialized Denso-style lower cushions
• Prevents high-pressure fuel leaks and unmetered air entry
• High-grade elastomer construction for superior chemical and heat resistance

Replacing O-rings and cushions during fuel system maintenance or injector cleaning is a critical step in preventing vacuum leaks and maintaining consistent fuel pressure. This kit provides a precise factory-fit solution for specialized Injector Dynamics applications.

Ensure a reliable, leak-free fuel system with the Injector Dynamics O-Ring and Seal Service Kit (SK.18.04.36.11). This specialized maintenance kit is designed specifically for fuel injectors configured with an 11mm top adapter and a WRX-style bottom adapter.

Replacing seals whenever injectors are pulled or fuel rails are serviced is critical for preventing vacuum leaks and hazardous fuel sprays. These high-tolerance seals are engineered to withstand the thermal and chemical demands of modern performance fueling environments, providing a precise fit into the fuel rail and intake manifold ports.

• Specific Fitment: Compatible with Injector Dynamics injectors using 11mm top and WRX bottom adapters.
• Preventative Maintenance: Essential for resealing injectors during rail upgrades or routine servicing.
• Chemical Resistance: Designed to maintain integrity under high fuel pressures and various fuel types.
• Manufacturer Part Number: SK.18.04.36.11

The Injector Dynamics T1 Subaru STi SFC Feed Line Kit provides a high-flow plumbing solution for enthusiasts upgrading their fuel systems. Specifically engineered to work with the SFC (Side Feed Conversion) fuel rail setup, this kit replaces restrictive factory lines with performance-grade plumbing to ensure consistent fuel delivery under high-demand conditions.

• Fits Subaru STi models equipped with SFC fuel rails
• Includes high-quality fuel lines and necessary fittings for plumbing the feed side of the rail system
• Engineered for high-horsepower applications requiring reliable fuel flow
• Manufacturer Part Number: SFC FLK

The Injector Dynamics PTS Sensor Add-On is a dedicated expansion component designed specifically for the ID-F750 fuel filter. By integrating this sensor directly into the filter housing, you can capture high-resolution fuel pressure and temperature data without the need for additional plumbing or potential leak points. This integration is essential for tuners requiring precise fuel modeling and for implementing engine protection strategies based on real-time fuel system performance.

• Engineered exclusively for integration with the Injector Dynamics ID-F750 housing
• Combines fuel pressure and temperature sensing into a single port
• Simplifies fuel system plumbing and reduces installation complexity
• Ensures accurate data for ECU-based fuel compensation and safety logic
• Manufacturer Part Number: PTS

Securely install your high-performance filtration system with the Injector Dynamics ID-F1250 Fuel Filter Mounting Bracket. This precision-engineered component is designed specifically to cradle the ID-F1250 filter body, providing a stable and vibration-resistant mounting solution for demanding fuel system configurations. It ensures your filter remains properly positioned, preventing unwanted movement and potential damage to fuel lines or fittings.

Constructed for durability and a perfect fit, this bracket eliminates the need for universal or improvised mounting solutions that can compromise system integrity. Whether you are plumbing a custom race application or upgrading a street-performance fuel system, this dedicated hardware provides the professional finish and reliability expected from Injector Dynamics components.

• Specifically designed for the Injector Dynamics ID-F1250 fuel filter
• Provides a secure, vibration-resistant mounting point
• Simplifies fuel system plumbing and installation
• Precision-engineered for a perfect fit and long-term durability
• Manufacturer Part Number: IDF1250 MOUNT

The Injector Dynamics ID-F1250 Fuel Filter is a high-performance filtration solution engineered to protect precision EFI components from contaminants. In high-pressure fuel systems, even microscopic debris can compromise injector spray patterns or damage internal seats; this filter serves as a critical line of defense to ensure fuel system longevity and consistent engine performance.

• Designed for high-flow capacity to minimize pressure drop in performance applications
• Robust housing construction suitable for demanding engine bay environments
• Essential for protecting high-performance fuel injectors from clogging and wear
• Manufacturer Part Number: IDF1250

Maintain the integrity of your high-performance fueling system with this genuine Injector Dynamics Replacement Filter Element. Engineered specifically for the ID F750 Fuel Filter, this drop-in element ensures your injectors are protected from microscopic contaminants that can cause clogging or degrade spray patterns. Regular maintenance with this high-efficiency filter element is essential for preserving the flow consistency and longevity of your fuel system components.

• Precision Fit: Designed exclusively for use within the Injector Dynamics ID F750 filter housing.
• System Protection: Traps debris to prevent damage to sensitive, high-flow fuel injectors.
• Serviceability: Allows for direct replacement during routine fuel system maintenance without replacing the entire housing.
• Manufacturer Part Number: F750 ELEMENT