Fits 2004-2014 Ford F-150 and F-150 Heritage models including XL, XLT, Lariat, FX2, FX4, STX, King Ranch, Platinum, and SVT Raptor.

The MaxTrac 303150 Rear Lowering Flip Kit delivers a substantial 5-inch drop, giving your truck a clean, low-profile stance while maintaining functional suspension geometry. This kit works by relocating the rear axle from below the leaf spring to the top, effectively lowering the center of gravity without requiring a change in spring rate or sacrificing ride quality.

Engineered for a direct-fit installation, the kit includes high-strength axle relocators and spring plates to ensure the axle remains securely positioned. MaxTrac also provides greaseable shackles to minimize noise and friction, along with heavy-duty bump stops to protect the frame under compression. All components are finished for maximum corrosion resistance and durability.

• Drop Height: 5 Inches
• Axle relocators and spring plates for precise fitment
• High-strength U-bolts and heavy-duty retainer plates
• Greaseable shackles for long-term serviceability and quiet operation
• Includes replacement bump stops and all necessary hardware
• Manufacturer Part Number: 303150

Fits 1998-2009 Ford Ranger 2WD models without StabiliTrak.

The MaxTrac 303050 axle flip kit is the most effective way to achieve a dramatic 5-inch rear drop on your Ford Ranger. By relocating the rear axle from its factory position below the leaf springs to on top of them, this kit lowers the vehicle's center of gravity while maintaining the factory spring rate. Every component is engineered for a precise fit and long-term durability on the street.

• Provides a 5-inch rear drop by relocating the rear axle
• Heavy-duty steel construction with a durable grey powder-coated finish
• Includes two precision-engineered axle relocators
• Comes with all necessary high-grade mounting hardware and installation instructions
• Designed specifically for 2WD models without StabiliTrak
• Manufacturer Part Number: 303050

Note: To ensure proper suspension travel and ride quality, new shocks optimized for lowered applications are highly recommended.

Fits select 1988-1998 Chevrolet and GMC C1500 and C2500 2WD models with 5 or 6-lug hubs.

Maximize axle travel and restore structural integrity on your lowered GM OBS truck with the MaxTrac Rear C-Frame Support Section. These C-notch plates provide the necessary clearance for the rear axle to move upward without striking the frame rail, a common issue on trucks with aggressive drop kits. Designed specifically for 2WD C1500 and C2500 platforms, this kit reinforces the chassis after frame modification to maintain safety and handling performance.

• Provides essential axle-to-frame clearance for lowered ride heights
• Heavy-duty C-section supports maintain frame rigidity after clearancing
• Low-profile bump stops prevent harsh bottoming out
• Engineered for 5-lug and 6-lug 2WD applications
• Includes all required high-grade mounting hardware for installation
• Manufacturer Part Number: 300560C

Kit Includes: (2) Rear C-Frame Support Sections, (2) Low-Profile Bump Stops, and necessary installation hardware.

Fits select 1988-1998 Chevrolet C1500, C2500 and GMC C1500, C2500 2WD models (5 and 6 lug).

The MaxTrac 300550 Rear Flip Kit provides a substantial 5-inch drop for OBS GM trucks by relocating the rear axle from underneath the leaf spring pack to the top. This kit is the most effective way to drop the rear of your truck while maintaining proper suspension geometry and load-carrying capacity. Each component is finished in a durable grey powder coat to resist corrosion and withstand the rigors of the road.

• Repositions the rear axle above the leaf springs for a consistent 5-inch drop
• Includes two (2) 710515 lowering shackles to fine-tune the rear ride height
• Precision-engineered axle relocators ensure proper alignment and axle seating
• Grey powder-coated finish for long-lasting durability and rust protection
• Complete kit includes 2 axle relocators, 2 upper U-bolt retainer plates, 2 lower spring retainer plates, and 2 shackles
• Manufacturer Part Number: 300550

Note: MaxTrac recommends installing new shocks designed for lowered applications to maintain optimal ride quality. Detailed installation instructions are included.

Fits select 2004-2024 Nissan Titan, Armada, and Pathfinder Armada (2WD/4WD) models.

Improve your truck or SUV's stance and handling with these MaxTrac front lowering coil springs. Designed to provide a precise 2-inch drop, these springs are hot wound to ensure they maintain their specific tolerances and ride height without sagging or fading over time. Each spring is finished in a durable grey powder coating to provide superior corrosion resistance against road debris and moisture.

These coils are engineered as direct replacements for the factory units. To maintain optimal ride quality and damping at the new lower center of gravity, aftermarket shocks designed for lowered vehicles are highly recommended. These springs offer a straightforward way to achieve a custom look without sacrificing the structural integrity of your suspension system.

• Part Number: 255320
• Drop Height: 2-inch (Front)
• Material: Hot wound steel for long-term durability
• Finish: Grey powder coat for rust and corrosion prevention
• Manufacturing: Made in the USA
• Recommended: Shocks designed for lowered travel height

Fits select 2004-2020 Ford F-150 and F-150 Heritage models.

Improve your truck's stance and handling with MaxTrac front lowering coils. These springs are engineered to provide a 2-inch drop while maintaining a comfortable ride quality suitable for daily driving. Unlike inferior springs that may sag, these coils are hot-wound in the USA to ensure precise tolerances that will not fade or settle over time.

• Hot-wound for superior durability and consistent ride height
• Provides a 2-inch front drop for a leveled or lowered look
• Durable grey powder coat finish to eliminate rust and corrosion
• Designed to work with factory mounting points
• Made in the USA
• Manufacturer Part Number: 253120

Fits 1998-2009 Ford Ranger 2WD (4-Cylinder, Non-StabiliTrak models) including Edge, EV, Postal, Splash, Sport, STX, Tremor, XL, and XLT.

Achieve a more aggressive stance and improved center of gravity with MaxTrac 3-inch front lowering coil springs. These springs are specifically engineered for the 2WD 4-cylinder Ford Ranger to provide a significant drop without sacrificing ride quality. Every spring is hot wound to precise tolerances, ensuring the steel maintains its structural integrity and ride height without fading or sagging over time.

To protect against rust and road debris, these coils feature a durable grey powder-coated finish. Designed as a direct replacement for your factory front springs, these MaxTrac coils are proudly made in the USA and offer a straightforward path to lowering your truck's front end.

• Part Number: 253030-4
• Drop Height: 3 Inches
• Position: Front
• Construction: Hot wound steel
• Finish: Grey powder coat
• Compatibility: 2WD 4-Cylinder models only
• Origin: Made in the USA

Fits select 2014-2020 Cadillac Escalade/ESV, Chevrolet Silverado 1500/Suburban/Tahoe, and GMC Sierra 1500/Yukon/XL models with cast steel suspension and Extended or Crew Cab configurations.

Lower your vehicle's front ride height by 2 inches while maintaining street-friendly handling with MaxTrac front lowering coil springs. These springs are hot wound to precise tolerances to ensure the height will not sag or "fade" over time, providing a consistent stance for the life of the vehicle. Each spring is finished in a durable grey powder coat to protect against rust and corrosion.

• Drop Height: 2 inches (Front)
• Construction: Hot wound for precise tolerances and long-term height retention
• Finish: Grey powder coating for superior corrosion resistance
• Compatibility: Designed for vehicles with cast steel suspension only
• Requirement: Will NOT work with factory Magnetic Ride Control / Magnetic Suspension
• Origin: Made in the USA
• Manufacturer Part Number: 251520-8

Fits select 2014-2020 Cadillac Escalade, Chevrolet Silverado 1500, Tahoe, GMC Sierra 1500, and Yukon models (Single Cab / Cast Steel Suspension).

Improve your vehicle's stance and center of gravity with MaxTrac 2-inch front lowering coils. These springs are specifically engineered for GM 1500 trucks and SUVs equipped with factory cast steel suspension components, providing a precise 2-inch drop that levels out the front end without compromising ride quality.

Every MaxTrac coil spring is made in the USA and hot-wound to ensure exact tolerances. This manufacturing process prevents the springs from sagging or losing height over time, a common issue with inferior cold-wound alternatives. To ensure long-term durability, the coils are finished in a signature grey powder coating that provides superior resistance to rust and road debris.

• Drop Height: 2 inches
• Position: Front
• Material: Hot-wound steel for precise tolerances
• Finish: Grey powder coat for corrosion resistance
• Configuration: Compatible with Single Cab models with Cast Steel suspension
• Country of Origin: Made in the USA
• Manufacturer Part Number: 251520-6

Fits select 1999-2007 Chevrolet Silverado and GMC Sierra 1500 / 1500 HD models (2WD V8).

Lower your truck's front end while maintaining factory ride quality with MaxTrac 2-inch front lowering coil springs. These springs are specifically engineered for the 2WD GM 1500 platform to provide a leveled, aggressive stance without the harshness often associated with lowering. Unlike cold-wound alternatives that can sag or "fade" over time, these coils are hot-wound to ensure they hold their height and spring rate through years of use.

Manufactured in the USA, each spring is finished in a durable grey powder coating to provide maximum protection against rust and corrosion in harsh road conditions.

• Provides a precise 2-inch front drop
• Hot-wound construction for long-term durability and height consistency
• Grey powder-coated finish for superior rust and corrosion resistance
• Designed to maintain comfortable, factory-like ride characteristics
• Made in the USA
• Manufacturer Part Number: 250920-8

Fits 1999-2007 Chevrolet Silverado 1500 / 1500 HD and GMC Sierra 1500 / 1500 HD (2WD V8 models).

Achieve a precise front-end stance with MaxTrac 1-inch lowering coil springs. These springs are engineered to provide a subtle drop while maintaining ride quality on 2WD V8-equipped GM 1500 trucks. Unlike cold-wound alternatives that can sag over time, these coils are hot-wound to ensure tight tolerances and consistent spring rates throughout the life of the vehicle.

Each spring is finished in a durable grey powder coat to provide maximum resistance against corrosion and road debris. Manufactured in the USA, these coils offer a direct-fit solution to lower your center of gravity for improved handling and a cleaner aesthetic without the harshness of a race-spec setup.

• Provides 1-inch of front lowering
• Hot-wound construction prevents spring fatigue and sagging
• Durable grey powder coat finish for rust resistance
• Maintains comfortable factory-style ride quality
• Made in the USA
• Manufacturer Part Number: 250910-8

Fits 1988-1999 Chevrolet and GMC C1500, C1500/C2500 Suburban, Tahoe, and Yukon 2WD models equipped with a V8 engine and 5 or 6-lug hubs.

MaxTrac lowering coil springs (MPN 250510-8) provide a controlled 1-inch drop for the front suspension of your GM truck or SUV. These springs are engineered to improve handling and level out your vehicle's stance without sacrificing the comfort of a factory ride. Unlike inferior alternatives, these springs are hot wound to ensure precise tolerances and prevent the height from fading or sagging over years of use.

• Drop Height: 1-inch front lowering
• Construction: Hot wound for durability and consistent spring rates
• Finish: Grey powder coating for superior rust and corrosion resistance
• Installation: Direct replacement for factory front coil springs
• Origin: Proudly made in the USA
• Manufacturer Part Number: 250510-8

This MaxTrac twin-tube gas-charged rear shock absorber is engineered to restore ride quality and provide consistent damping for trucks and SUVs at stock height or with up to 4 inches of lift. Designed for reliable performance on the street and trail, this shock uses a proven twin-tube internal architecture to manage suspension travel effectively.

Fits select 1982-2010 Chevrolet and GMC vehicles, including S10, Sonoma, Blazer, Jimmy, C1500, C2500, Suburban, Tahoe, Yukon, Colorado, and Canyon.

• Manufacturer Part Number: 2400LL-3
• Configuration: Twin tube gas charged
• Mounting Style: Loop/Loop
• Extended Length: 24.5 inches
• Collapsed Length: 14.6 inches
• Included Hardware: 3-inch bar pin and 9/16-inch sleeve
• Installation Note: Must be installed with the shock shaft oriented towards the top.

Fits 2014-2025 Ford F-150 (XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, and STX).

MaxTrac MST Sport Series front lowering struts are engineered to provide a controlled, compliant ride while allowing you to dial in the exact front-end stance of your truck. Utilizing twin-tube technology and variable valving, these struts manage suspension travel more effectively than OE dampers at lower ride heights, significantly reducing harsh bottoming out on uneven surfaces. The strut body is finished in a durable black powder coating for long-term corrosion resistance.

Adjustment is straightforward and precise, utilizing a series of machined grooves and a heavy-duty snap ring to set the spring perch height. This system allows for height changes from stock ride height down to a 3-inch drop in 1-inch increments. These struts are designed to work with all cab configurations and engine displacements, and they reuse your factory coil springs to maintain consistent spring rates.

• Adjustment Range: 0" to 3" drop in 1" increments
• Internal Design: Twin-tube with variable valve technology
• Height Adjustment: Machined grooves with snap ring system
• Finish: Black powder-coated strut body
• Component Compatibility: Reuses factory coil springs and mounting hardware
• Application: Fits all cab and motor configurations
• Manufacturer Part Number: 223203

Fits 2015-2025 Ford F-150 (King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, Tremor, XL, XLT).

Achieve a level stance and improved handling by dropping the rear of your 2015-2025 Ford F-150 by a full 4 inches. This MaxTrac rear lowering flip kit (MPN 203240) provides a complete suspension solution by relocating the rear axle above the leaf springs. Engineered for durability and precise fitment, the kit includes high-quality spring hangers and application-specific MaxTrac shocks to maintain ride quality at the new lower ride height. Please note that cutting is required on the straight flip kit for proper clearance and installation.

• Part Number: 203240
• Drop Height: 4-inch Rear
• Rear Flip Kit and Spring Hangers included
• Includes MaxTrac shocks for optimized suspension travel
• Includes all necessary installation hardware
• Technical Note: Cutting is required for installation

Fits select 2009-2024 Dodge and Ram 1500 and 1500 Classic 4-door models (V8 2WD/4WD).

The MaxTrac 202940 lowering kit is a comprehensive suspension solution designed to level out your truck's stance and improve handling without compromising ride quality. This 2"/4" drop kit replaces the factory front coil springs with performance lowering coils and includes a rear flip kit to achieve a significant drop while maintaining proper geometry. To ensure a controlled ride, the kit is paired with twin-tube shocks specifically valved for lowered applications.

• 2-inch lowering front coil springs
• Rear 5-inch flip kit for a level, street-ready stance
• Front shocks and rear twin-tube shocks for improved dampening
• Bolts to factory mounting points for a budget-friendly installation
• Manufacturer Part Number: 202940

Fits select 2019-2025 Ram 1500 and 1500 Classic models (2WD/4WD) equipped without factory air ride. This kit provides a substantial 4-inch drop to the rear of your vehicle for a level, aggressive stance.

The MaxTrac Suspension 202740 rear lowering box kit is engineered to drop your truck's ride height without sacrificing daily drivability. By replacing the factory rear coils with specifically tuned lowering springs, this system provides a lower center of gravity and improved aesthetics. To ensure the suspension geometry remains within functional tolerances, the kit includes heavy-duty relocation brackets for both the track bar and the sway bar. Matching rear shocks are provided to accommodate the reduced travel and provide consistent damping. Please note that installation involves cutting for the straight flip kit components.

• Manufacturer Part Number: 202740
• Rear Lowering Height: 4 Inches
• Included Components: Rear lowering coils, track bar relocation bracket, sway bar brackets, and rear shocks
• Compatibility: Non-Air Ride models only
• Installation Note: Cutting is required on straight flip kit

Fits 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 2WD/4WD models, including LD, LTD, and Limited variations.

The MaxTrac Suspension 5-inch rear lowering flip kit (MPN: 201950) provides a significant drop for the rear of your 2019-2025 GM 1500 by relocating the axle on top of the leaf springs. This comprehensive box kit is designed to maintain proper suspension geometry while delivering a level, aggressive stance. The kit includes specialized lowering hangers and bump stops to ensure sufficient travel and prevent bottoming out after the drop.

To complement the new ride height, MaxTrac includes a set of tuned rear shocks specifically valved for lowered applications, ensuring consistent damping and ride quality. This kit is a direct-fit solution that replaces the factory mounting hardware to achieve a precise 5-inch reduction in rear ride height.

• Manufacturer Part Number: 201950
• Drop Height: 5 Inches (Rear)
• Position: Rear Axle
• Included Components: Axle flip kit, lowering hangers, bump stops, and rear shocks
• Construction: Heavy-duty steel with a durable finish
• Fitment: Compatible with 2WD and 4WD configurations

Fits 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 (2WD/4WD), including LD, LTD, and Limited models.

Drop the rear of your GM truck with precision using the MaxTrac Suspension 4-inch rear lowering box kit. This system utilizes a flip kit to relocate the rear axle from beneath the leaf springs to the top, effectively lowering the center of gravity and eliminating unsightly wheel gap. Designed as a comprehensive solution, this kit ensures you have the correct hardware and damping to maintain a controlled ride at a reduced height.

• Achieves a 4-inch rear drop for a leveled, street-performance stance
• Rear axle flip kit with heavy-duty hangers and shackles
• Adjustable shackle design for fine-tuning the final ride height
• Includes application-tuned shocks to accommodate the shorter suspension travel
• New bump stops included to protect the frame and suspension components
• All necessary mounting hardware for a direct-fit installation
• Manufacturer Part Number: 201940

Fits select 2015-2020 Cadillac Escalade and Escalade ESV, Chevrolet Suburban and Tahoe, and GMC Yukon, Yukon XL, Acadia, and Terrain.

Achieve a more aggressive stance and improved center of gravity with the MaxTrac Suspension 4-inch rear lowering box kit. This kit is engineered to drop the rear ride height while maintaining ride quality by utilizing components specifically tuned for the GM K2XX platform. The included shock extenders allow you to retain proper shock travel and valving performance, while the sensor rods ensure electronic suspension components remain correctly indexed after the drop.

• Manufacturer Part Number: 201640
• Drop Height: 4-inch Rear
• Includes rear lowering coil springs
• Includes shock extenders to maintain factory ride quality
• Includes sensor rods for proper electronic suspension alignment
• Note: Cutting is required on straight flip kit applications

Fits select 2015-2020 Cadillac Escalade/ESV, Chevrolet Tahoe/Suburban, and GMC Yukon/Acadia/Terrain models equipped with Magneride.

MaxTrac Suspension part number 201630 provides a precise 3-inch rear drop for GM SUVs, engineered specifically for vehicles equipped with Magneride factory active suspension. This box kit is designed to lower the vehicle's center of gravity and level the rear stance while maintaining the functionality of the factory electronic damping system.

The kit includes high-quality rear lowering coils to provide the drop, along with shock extenders to keep the dampers within their intended operating range. To ensure the active suspension correctly identifies the new ride height, adjustable sensor rods are included to recalibrate the Magneride system.

• Manufacturer Part Number: 201630
• 3" Rear Lowering Coils
• Magneride Sensor Rods for proper system calibration
• Shock Extenders to maintain suspension travel
• Compatible with 2WD and 4WD models
• Technical Note: Cutting is required on straight flip kit applications

Fits select 2015-2020 Cadillac Escalade and Escalade ESV, Chevrolet Suburban and Tahoe, and GMC Yukon, Yukon XL, Acadia, and Terrain.

Level the stance of your GM SUV with the MaxTrac Suspension 2-inch rear lowering box kit. This kit is engineered to provide a subtle but effective drop, improving the vehicle's profile while retaining comfortable ride characteristics. By utilizing specifically tuned lowering coils rather than simple spacers, this kit ensures predictable handling and suspension travel.

This comprehensive kit includes shock extenders to maintain proper damper orientation and geometry, along with sensor rods to ensure compatibility for vehicles equipped with factory auto-leveling or electronic suspension systems. MaxTrac components are designed for a direct fit, though note that cutting is required on straight flip kit applications.

• Rear Drop Height: 2.0 inches
• Includes lowering coil springs for a comfortable ride quality
• Shock extenders included to preserve factory shock travel
• Includes sensor rods for electronic suspension compatibility
• Manufacturer Part Number: 201620
• Finish: Durable black powder coat

Fits select 2007-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including Classic and HD Classic variants (2WD/4WD).

Achieve a significant drop in rear ride height while maintaining proper suspension geometry with the MaxTrac Rear Adjustable Lowering Flip Kit (MPN: 201360). This kit relocates the rear axle from beneath the leaf springs to the top, providing a 5 to 6 inch drop. Unlike basic flip kits, this system includes rear spring hangers to allow for adjustable height settings, ensuring you can fine-tune the stance of your truck.

To maintain ride quality at the new lower center of gravity, this kit includes a pair of MaxTrac-specific rear shocks valved for lowered applications. The system is engineered to bolt directly into factory locations with the included hardware, providing a comprehensive solution for aggressive rear lowering.

• Rear adjustable flip kit for 5" or 6" drop
• Includes rear spring hangers for height adjustment
• Includes rear bump stops to prevent bottoming out
• Includes MaxTrac rear shocks valved for lowered height
• All necessary grade-8 hardware included
• Relocates axle to top of leaf springs
• Manufacturer Part Number: 201360

Fits select 2007-2020 Cadillac, Chevrolet, and GMC SUVs and crossovers, including Escalade, Tahoe, Suburban, Yukon, and XT series vehicles.

Achieve a leveled stance and improved center of gravity with the MaxTrac 4-inch rear lowering kit. This kit is engineered to provide a significant drop while maintaining ride quality and suspension geometry. For vehicles equipped with electronic leveling, this kit includes rear air ride sensor rods to ensure the system functions correctly at the new ride height. The included shock extenders allow you to retain proper shock travel, preventing bottoming out and preserving factory damping characteristics.

• Provides a 4-inch rear drop for a level, aggressive profile
• High-quality rear drop coil springs for consistent performance
• Rear shock extenders maintain factory shock travel and geometry
• Integrated air ride sensor rods for vehicles with electronic leveling systems
• Direct-fit installation with all necessary hardware included
• Manufacturer Part Number: 201240

Improve the stance and center of gravity of your GM SUV with the MaxTrac 201220 2-inch rear lowering kit. Engineered to provide a clean, level look while maintaining ride quality, this kit replaces the factory rear springs with precision-wound lowering coils and includes the necessary geometry correction hardware to keep your suspension operating within its designed parameters.

• Fits select 2007-2020 Cadillac Escalade, Chevrolet Tahoe/Suburban/Avalanche, and GMC Yukon models (2WD/4WD).
• Includes a pair of 2-inch rear drop coils for a consistent ride height.
• Rear shock extenders included to maintain proper shock travel and damping performance.
• Includes rear air ride sensor rods to ensure correct calibration for vehicles equipped with factory auto-leveling systems.
• Durable powder-coated finish for long-term corrosion resistance.
• Complete kit includes all necessary hardware for a straightforward installation.
• Manufacturer Part Number: 201220

Fits select 2000-2018 Cadillac Escalade, Chevrolet Tahoe, Suburban, Avalanche, and GMC Yukon / Yukon XL models (2WD/4WD).

Lower your GM SUV's rear stance while maintaining ride quality with the MaxTrac 2-inch Rear Lowering Kit. This comprehensive kit is engineered to provide a level look without compromising the utility of your vehicle. The included drop coils are finished with a durable powder coat to resist corrosion and ensure long-term reliability in various driving conditions. To maintain correct suspension geometry and damper performance, this kit also includes rear shock extenders and air ride sensor rods, ensuring your factory leveling system remains functional after the drop.

• Lowers the rear of the vehicle by 2 inches
• Durable powder-coated finish on rear drop coils
• Maintains factory ride quality and suspension geometry
• Includes rear shock extenders and air ride sensor rods
• Complete with all necessary installation hardware
• Manufacturer Part Number: 201020