Fits 2003-2008 Dodge Ram 2500 and 3500 2WD Diesel models. These MaxTrac front lift coils provide a reliable 3-inch increase in ride height, allowing clearance for up to 33-inch tires while maintaining a composed ride.

Engineered and manufactured in the USA, these springs are hot wound to precise tolerances. This manufacturing process ensures the coils maintain their height and rate over time without sagging or fading, even under the heavy front-end load of a Cummins diesel engine. The springs are finished in a durable grey powder coating to provide superior corrosion resistance against road debris and harsh weather conditions.

• Front Lift Height: 3 Inches
• Manufacturing Process: Hot wound for long-term durability
• Finish: Grey powder coat for rust prevention
• Tire Clearance: Supports up to 33" tires
• Origin: Made in the USA
• Manufacturer Part Number: 752230-6

Fits 1999-2007 Chevrolet Silverado 1500/1500 HD and GMC Sierra 1500/1500 HD 2WD models equipped with V8 engines.

MaxTrac front lift coils are designed to provide a leveled stance while maintaining the suspension geometry of your 2WD GM truck. These springs deliver a consistent 2-inch lift, providing additional clearance for larger tire and wheel combinations without sacrificing ride comfort. Unlike cold-rolled alternatives, these coils are hot wound for precise tolerances and long-term durability, ensuring they will not sag or lose height over time.

To ensure longevity in harsh environments, each spring is finished in a durable grey powder coat that provides superior resistance against rust and road debris. These coils are a direct-fit replacement for factory springs on V8-equipped models.

• Lift Height: 2-inch Front
• Material: Hot wound steel for maximum durability
• Finish: Corrosion-resistant grey powder coat
• Fitment: Specific to 2WD V8 models only
• Manufacturing: Made in the USA
• Manufacturer Part Number: 750920-8

Fits select 1988-1998 Chevrolet C1500 and GMC C1500 2WD models equipped with a V8 engine.

Improve your truck's stance and gain extra tire clearance with MaxTrac front lift coils. These 2-inch lift springs are specifically engineered for V8-equipped 2WD GM C1500 models, providing a reliable method to level your vehicle or compensate for heavy front-end accessories while maintaining a comfortable ride quality.

Manufactured in the USA, these coils are hot wound to precise tolerances to ensure they will not sag or fade over time. The springs are finished in a durable grey powder coating to provide superior resistance against rust and corrosion, even in harsh driving environments.

• Provides 2 inches of front lift height
• Hot-wound steel construction for long-term durability and height retention
• Durable grey powder coat finish eliminates rust
• Designed specifically for V8 engine weight and 2WD suspension geometry
• Made in the USA
• Manufacturer Part Number: 750520-8

Fits 2004-2024 Nissan Titan models. These MaxTrac Suspension 1-inch rear lift shackles provide a reliable method for increasing rear-end clearance or leveling your truck's stance. Fabricated from heavy-duty steel and finished in a durable grey powder coat, these shackles are engineered to withstand the rigors of off-road use and harsh environmental conditions.

Unlike standard factory components, these shackles feature high-quality urethane bushings. These bushings are designed to allow for smoother suspension articulation with significantly less binding than traditional rubber, ensuring consistent performance throughout the suspension cycle.

• Provides 1 inch of rear lift
• Precision fabricated from heavy-duty steel
• Durable grey powder-coated finish for corrosion resistance
• Urethane bushings included for reduced binding and improved durability
• Simple bolt-on installation to factory mounting points
• Manufacturer Part Number: 715310
• Includes one pair of shackles

Fits 2004-2025 Ford F-150 and Nissan Titan.

MaxTrac Suspension 1-inch rear lift shackles are engineered to provide a subtle lift for your truck's rear end while maintaining original equipment (OE) ride quality. These shackles are an ideal solution for owners looking to level their vehicle or gain additional clearance without the stiffness often associated with add-a-leaf kits or replacement leaf packs.

Each shackle is constructed from heavy-duty fabricated steel for maximum durability and finished in a resilient grey powder coat to protect against corrosion and road debris. As a direct bolt-on upgrade, they are designed to fit into the factory mounting points, ensuring a straightforward installation process.

• Part Number: 713210
• Lift Height: 1 Inch
• Material: Fabricated Steel
• Finish: Grey Powder Coat
• Includes: One pair (2) of rear lift shackles
• Installation: Bolt-on to factory mounts
• Retains factory ride comfort

Fits select 2002-2025 Chevrolet Silverado 1500, GMC Sierra 1500, and Dodge Ram 1500 trucks. These MaxTrac 2-inch rear lift shackles provide an effective and durable way to raise the rear of your vehicle for improved stance and tire clearance.

Fabricated from heavy-duty steel and finished in a resilient grey powder coating, these shackles are designed to replace factory hardware and maintain suspension integrity. MaxTrac part number 712120 includes high-quality urethane bushings, which offer superior longevity over OEM rubber and help minimize binding during suspension cycling for a smoother ride.

• Lift Height: 2 inches
• Material: Fabricated steel
• Finish: Grey powder coat
• Bushings: Urethane for reduced binding
• Installation: Direct bolt-on replacement for factory shackles
• Manufacturer Part Number: 712120
• Quantity: Pair (two shackles)

Fits select 2005-2023 Toyota Tacoma 2WD 6-lug models (Base, Pre Runner, SR, SR5, TRD Sport, TRD Off-Road, and X-Runner). Achieve 4 inches of front lift without sacrificing ride quality or factory suspension geometry using MaxTrac 706840 front lift spindles.

These spindles are cast from high-strength ductile iron and finished with a durable e-coat to prevent corrosion. By replacing the factory steering knuckles, these spindles provide true suspension lift while maintaining OE-like steering characteristics. This kit includes extended DOT-compliant brake lines to accommodate the increased ride height and all necessary mounting hardware for a direct-fit installation.

• Provides 4 inches of front lift for 2WD 6-lug applications
• Cast ductile iron construction for maximum durability
• Protective e-coat finish resists rust and environmental debris
• Clears up to 33x12.50 tires
• Requires 17-inch or larger wheels with maximum 4.75-inch backspacing
• Includes extended DOT-approved brake lines and mounting hardware
• Manufacturer Part Number: 706840

Note: These spindles are not compatible with factory wheels and tires. Aftermarket wheels meeting the 17-inch minimum size and backspacing requirements are required for installation.

Fits select 2007-2021 Toyota Tundra 2WD models including Base, SR, SR5, Limited, Platinum, 1794 Edition, Nightshade, and Trail. These 3.5-inch lift spindles provide a straightforward solution for increasing front-end ground clearance while maintaining factory-like ride quality and suspension geometry.

Constructed from heavy-duty ductile iron and finished with a protective e-coat for long-term corrosion resistance, these spindles replace the factory components to lower the wheel hub mounting point. This design allows for larger tire fitment without the need for additional leveling kits or strut modifications that can stiffen the ride. This kit (MPN 706735) includes extended DOT-compliant brake lines to accommodate the increased steering travel and height.

• 3.5-inch front lift height
• Constructed from high-strength ductile iron
• Black e-coat finish for maximum durability
• Includes DOT-approved extended brake lines
• Compatible with factory wheels and tires
• Recommended wheel: 18-inch or larger with 6.5-inch backspacing
• Recommended tire size: 33x12.50

Fits 2009-2020 Ford F-150 2WD models. MaxTrac Suspension part number 703440 provides a true 4-inch front lift for two-wheel drive F-150s, allowing for larger wheel and tire combinations without sacrificing ride quality.

These spindles are engineered to replace the factory components, maintaining OEM suspension geometry and steering feel. Cast from high-strength ductile steel and finished with a durable black e-coat for superior corrosion resistance, these spindles are designed for long-term durability in harsh environments. This kit includes DOT-compliant extended brake lines, ensuring your braking system maintains proper slack and safety at the new ride height.

• True 4-inch front lift height
• High-strength ductile steel construction
• Corrosion-resistant black e-coat finish
• Includes extended DOT-compliant brake lines
• Maintains factory ride quality and steering geometry
• Manufacturer Part Number: 703440

Fits 2001-2009 Ford Ranger 2WD models equipped with torsion bar suspension and without Stabilitrak.

These MaxTrac 4-inch front lift spindles (MPN 703030C) are a robust solution for leveling your stance or clearing larger tires without sacrificing ride quality. Precision-engineered from high-strength ductile iron and finished with a protective e-coat, these spindles provide a durable alternative to standard lift kits by maintaining factory steering geometry. The bolt-on design replaces the factory spindles and includes all necessary hardware for a straightforward installation.

• Provides 4 inches of front lift
• Constructed from heavy-duty ductile iron for maximum strength
• Corrosion-resistant e-coat finish
• Increases track width by 0.5 inches per side
• Recommended wheel size: 15 inches or larger with 3.75-inch backspacing
• Compatible with stock wheels and tires
• Manufacturer Part Number: 703030C

Fits select 2001-2009 Ford Ranger 2WD models with coil spring front suspension and without Stabilitrak, including Edge, EV, Sport, STX, Tremor, XL, and XLT trims.

MaxTrac front lift spindles provide a true 4-inch lift for your Ford Ranger, increasing ground clearance and allowing for larger tire fitment without compromising ride quality. Unlike spacer-based lifts that can over-extend suspension components, these spindles maintain factory-like geometry and ball joint angles. This is a direct replacement for your factory spindles and is engineered to handle off-road terrain or daily street use.

Constructed from high-strength ductile iron and finished with a durable black e-coat, these spindles are built to resist corrosion. The design increases track width by 0.5 inches per side for improved stability. Each set comes with all necessary hardware for a complete installation and is compatible with stock wheels and tires.

• Manufacturer Part Number: 703030B
• Lift Height: 4 inches
• Material: Ductile iron with black e-coat finish
• Track Width: Increases 0.5 inches per side
• Recommended Wheel Size: 15-inch or larger with 3.75-inch backspacing
• Recommended Tire Size: 31x10.50
• Fits factory wheels and tires
• Installation hardware included

Fits 1998-2000 Ford Ranger 2WD (EV, Splash, XL, XLT) equipped with coil spring suspension and without Stabilitrak.

These MaxTrac Suspension 4-inch lift spindles provide a straightforward way to increase ground clearance and fit larger tires on your 2WD Ford Ranger without sacrificing ride quality. By relocating the wheel hub position rather than compressing the factory springs, these spindles maintain your original suspension geometry and comfort levels. Each unit is precision-engineered to be a direct bolt-on replacement for the stock components.

Built for durability, these spindles are cast from high-strength ductile steel to handle the stresses of daily driving and off-road use. The black E-coat finish provides long-lasting protection against corrosion and road debris.

• Provides 4 inches of front lift
• Constructed from heavy-duty cast ductile steel
• Durable black E-coat finish for corrosion resistance
• Maintains factory ride quality and handling characteristics
• Direct bolt-on installation using factory mounting points
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 703030A

Fits select 2019-2024 Ram 1500 and Ram 1500 Classic (2WD models). This pair of MaxTrac 4-inch front lift spindles provides a significant increase in ground clearance and a leveled stance without compromising factory ride quality or requiring cutting or welding. Unlike spacer kits that can stress factory components, these spindles maintain proper suspension geometry and track width.

• Manufactured from high-strength ductile steel for superior durability
• Finished in a corrosion-resistant black e-coat
• Includes extended DOT-compliant brake lines for a complete installation
• Replaces factory steering knuckles while utilizing stock hubs and bearings
• Manufacturer Part Number: 702740

These spindles are engineered for 2WD trucks only and offer a straightforward bolt-on solution for fitting larger tire and wheel combinations. By lifting from the spindle rather than the spring or strut, you preserve the factory suspension travel and damping characteristics.

Fits 2003-2008 Dodge Ram 1500, 2500, and 3500 2WD models.

This MaxTrac 3.5-inch front lift spindle kit (MPN: 702235) provides a reliable method to increase front-end clearance on your Dodge Ram while maintaining factory-like steering geometry and ride quality. Cast from high-strength ductile iron and finished with a durable e-coat, these spindles are built to handle the demands of heavy-duty trucks. The kit includes extended DOT-compliant brake lines and all necessary mounting hardware to ensure a direct-fit installation.

Please note that this modification increases the front track width by 1.375 inches per side. These spindles are compatible with stock dually wheels, but will not fit stock single rear wheel (SRW) wheels and tires due to backspacing requirements.

• Lift Height: 3.5 inches
• Construction: High-strength ductile iron
• Finish: Black E-coat for corrosion resistance
• Track Width Increase: 1.375 inches per side
• Included Hardware: Extended DOT-compliant brake lines, mounting hardware
• Recommended Wheel Size: 17-inch or larger with 4.75-inch backspacing
• Recommended Tire Size: Up to 33x12.50
• Manufacturer Part Number: 702235

Fits 2002-2024 Dodge Ram 1500, Ram 1500, and Ram 1500 Classic 2WD models across all trims including Sport, Rebel, and Tradesman.

MaxTrac 4.5-inch lift spindles are the most effective way to increase front-end clearance on a 2WD Ram 1500 without sacrificing ride quality. Unlike spacer kits that compress factory springs, these spindles relocate the hub mounting point lower, maintaining your original suspension geometry, spring rate, and turning radius. This provides a true 4.5 inches of lift while keeping the factory-smooth ride.

Constructed from high-strength ductile iron, these spindles are significantly more durable than stock units and finished with a corrosion-resistant e-coat. Each kit includes extended DOT-compliant stainless steel brake lines and all required hardware to ensure a straightforward installation that bolts directly to factory mounting points.

• Lift Height: 4.5 inches (Front)
• Material: Ductile iron with black e-coat finish
• Wheel Requirement: 17-inch or larger with maximum 5.5-inch backspacing
• Recommended Tire: Up to 35x12.50 (stock 17-inch+ wheel/tire combos will fit)
• Components: Pair of lift spindles (702145), extended DOT-approved brake lines, and mounting hardware
• Warranty: Backed by a limited lifetime warranty

Fits 2019-2025 Chevrolet Silverado/Suburban/Tahoe, GMC Sierra/Yukon/Yukon XL, and Cadillac Escalade/ESV 2WD models.

MaxTrac Suspension front lift spindles (Part #701935) provide a reliable and effective way to increase front-end ground clearance by 3.5 inches without sacrificing factory ride quality. Unlike spacer kits that can over-extend suspension components, these spindles maintain your truck or SUV's original geometry while providing the height needed for larger wheel and tire combinations.

Each spindle is cast from high-strength ductile steel, providing superior durability compared to standard grey iron. The black e-coat finish offers long-term corrosion resistance in harsh environments. This kit also includes extended, DOT-compliant brake lines to ensure your braking system remains safe and functional at the new ride height.

• Provides 3.5-inch front lift
• Maintains factory ride quality and suspension geometry
• Constructed from heavy-duty ductile steel for maximum strength
• E-coated black for superior corrosion protection
• Includes extended DOT-compliant brake lines
• Manufacturer Part Number: 701935

Fits select 1999-2007 Chevrolet Silverado/Sierra 1500, Tahoe, Yukon, Suburban, Avalanche, and Cadillac Escalade 2WD (Coil/Torsion models).

Achieve a reliable 3-inch front lift while maintaining factory ride quality with these MaxTrac lift spindles. Unlike spacers or taller springs that can alter suspension geometry and ride stiffness, these replacement spindles provide lift by relocating the wheel hub position. Cast from high-strength ductile iron, these spindles are designed for durability and are e-coated for superior corrosion resistance against the elements.

• Lift Height: 3.0 Inches
• Construction: High-strength ductile iron
• Finish: Black E-coat for corrosion resistance
• Track Width: Increases track width by 0.5 inches per side
• Wheel Compatibility: 17-inch or larger wheels required
• Backspacing: 4-5/8 inch maximum backspacing recommended
• Recommended Tire Size: 33x12.50 (stock 17-inch wheel/tire combos will fit)
• MPN: 700930

Each set includes all necessary hardware for a straightforward installation to factory mounting points. These spindles are an ideal solution for truck owners looking to clear larger tires without compromising the vehicle's OE handling characteristics.

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon 2WD models (Base, LT, WT, Z71, SL, SLE, SLT, Denali, and Elevation).

Achieve a true 4-inch front lift while maintaining factory ride quality with MaxTrac Suspension lift spindles. These spindles are cast from high-strength ductile steel, providing a rugged lifting solution that replaces the factory units without compromising steering geometry or track width. Each spindle features a durable black E-coat finish to protect against corrosion and road debris.

Because increasing ride height requires additional length for your hydraulic system, this kit includes a pair of DOT-compliant extended brake lines. This ensures a safe, bolt-on installation that doesn't overextend your factory components at full suspension droop.

• Precision-engineered 4-inch front lift height
• Cast from heavy-duty ductile steel for maximum strength
• Corrosion-resistant black E-coat finish
• Includes DOT-compliant extended stainless steel braided brake lines
• Direct bolt-on replacement for factory spindles
• Designed specifically for 2WD applications
• Manufacturer Part Number: 700440

Fits 2004-2024 Nissan Titan 2WD and 4WD models (LE, Platinum Reserve, PRO-4X, S, SE, SL, SV, XE).

Level the stance or drop the rear of your Nissan Titan with MaxTrac 2-inch lowering shackles. These heavy-duty shackles replace the factory units to provide a precise 2-inch drop, improving the vehicle's profile while maintaining ride quality. Built for long-term durability, these shackles feature a grey powder-coated finish to prevent rust and corrosion in harsh underbody environments.

Unlike standard static shackles, MaxTrac includes greasable bushings and integrated zerk fittings. This allows for easy maintenance and ensures the suspension remains quiet and pivot points stay lubricated, preventing the squeaking common with inferior polyurethane components. This kit comes complete with the necessary sleeves for a straightforward installation into factory mounting locations.

• Drop Height: 2 Inches
• Finish: Grey Powder Coat
• Serviceable Design: Includes Zerk fittings and greasable bushings
• Installation: Replaces OE rear shackles
• Part Number: 415320

Fits select 1999-2025 Ford F-150, F-250, and F-350, as well as 2011-2025 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD trucks.

Correct your truck's stance and achieve a leveled look with MaxTrac 1-inch rear lowering shackles. These heavy-duty shackles are designed to replace the factory components, effectively dropping the rear of the vehicle to eliminate excessive wheel well gap. To ensure long-term durability and quiet operation, these shackles feature high-quality greaseable bushings and sleeves. The integrated zerk fittings allow for easy maintenance without disassembly, preventing the common squeaking associated with polyurethane or dry bushings.

Built for the rigors of heavy-duty use, these shackles are finished in MaxTrac's signature gunmetal grey powder coat to protect against rust and road debris. Whether you are seeking improved aesthetics or easier access to the truck bed, these 413710 shackles provide a straightforward bolt-on solution with no welding or major fabrication required.

• Lowering Height: 1.0 Inch (Rear)
• Finish: Signature Gunmetal Grey Powder Coat
• Hardware: Greaseable bushings, sleeves, and zerk fittings included
• Installation: Direct bolt-on replacement for factory shackles
• Manufacturer Part Number: 413710

Fits 2004-2014 Ford F-150 and F-150 Heritage models including XL, XLT, Lariat, FX2, FX4, STX, King Ranch, Platinum, and SVT Raptor.

Level out your truck's stance and improve its profile with these MaxTrac 2-inch rear lowering shackles. Designed as a direct replacement for the factory hardware, these shackles provide a reliable way to drop the rear of your F-150 without sacrificing ride quality. The assembly features high-quality urethane bushings to minimize binding and ensure quiet, smooth suspension articulation under varying load conditions.

Built for long-term durability, these shackles are finished in a grey powdercoat to resist corrosion and road debris. They come fully equipped with sleeves and integrated zerk fittings, allowing for easy maintenance and ensuring the bushings remain properly lubricated for the life of the part.

• Part Number: 413130
• Drop Height: 2 inches
• Material: Heavy-duty steel with grey powdercoat finish
• Bushings: Greasable urethane for reduced binding
• Included: Shackles, sleeves, bushings, and zerk fittings

Fits select 1999-2025 Ford F-150, F-250, and F-350, and 2011-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks.

MaxTrac lowering shackles are an effective and straightforward way to drop the rear of your truck by 2 inches, helping to level out the stance or achieve a lower overall profile. These shackles are engineered to replace the factory units and are constructed with a durable grey powder-coated finish to resist corrosion and road debris. Unlike standard rubber-bushed shackles, these feature high-quality urethane bushings that provide a firmer feel and significantly less binding during suspension travel.

To ensure long-term performance and quiet operation, the kit includes greasable sleeves and integrated Zerk fittings, allowing for easy maintenance without disassembly. This kit provides a complete solution for those looking to improve their truck's aesthetics while maintaining ride quality.

• Provides a 2-inch rear drop height
• Durable grey powder-coated finish
• Includes greasable urethane bushings for reduced binding and noise
• Integrated Zerk fittings for easy maintenance
• Includes all necessary sleeves and hardware
• Manufacturer Part Number: 411420

Fits select 1988-2019 Chevrolet Silverado/Sierra 1500, C1500/C2500, Suburban, Tahoe/Yukon, and 1997-2009 Ford F-150 and Ranger. These MaxTrac lowering shackles offer a straightforward way to drop the rear of your truck by 2 inches, helping to level the stance or reduce the wheel gap for a more aggressive look.

Constructed for durability and ease of maintenance, these shackles (MPN: 410520) are finished in a grey powder coating to resist corrosion and road debris. Unlike standard rubber-bushed shackles, these units include greasable polyurethane bushings and sleeves. The integrated zerk fittings allow for regular lubrication, preventing the squeaks often associated with aftermarket suspension components. On specific makes and models, these versatile components may also be utilized as lift shackles.

• Provides a 2-inch rear drop
• Includes greasable bushings and sleeves for quiet operation
• Integrated zerk fittings for easy maintenance
• Durable grey powder-coated finish to eliminate rust
• Direct replacement for factory shackles
• Manufacturer Part Number: 410520

Fits select 1988-1998 Chevrolet and GMC C1500 and C2500 2WD models.

When lowering your 1988-1998 GM truck by 5 to 6 inches, the factory rear shock absorber angle becomes compromised, often resulting in poor damping performance and limited travel. MaxTrac rear shock angle correctors (also known as shock extenders) relocate the mounting points to restore proper shock geometry. By repositioning the shocks to a more vertical orientation, these extensions improve ride quality and ensure your dampers can effectively manage suspension movement on heavily dropped applications.

• Specifically designed for vehicles with 5-inch to 6-inch rear drops
• Restores efficient shock angle for improved damping and suspension travel
• Manufactured from heavy-duty steel with a durable grey powder-coated finish
• Compatible with both 5-lug and 6-lug 2WD chassis
• Direct bolt-on installation using included hardware
• Manufacturer Part Number: 400500
• Includes: (2) Shock Extenders, Installation Hardware

Fits 2014-2025 Ford F-150 (XL, XLT, Lariat, Platinum, King Ranch, Raptor, Tremor, and Limited models).

MaxTrac Suspension front adjustable lowering struts provide a versatile solution for F-150 owners looking to customize their truck's stance without compromising ride quality. These struts offer a drop range of 0 to 3 inches, allowing you to dial in the exact front-end height needed for a level look or a full sport-truck drop. By utilizing a series of retainer clips and a movable coil seat, these struts maintain proper spring tension across the entire adjustment range.

Built for durability and precision, these struts feature a sleek black finish and are designed as direct replacements for the factory units, mounting to existing OE points for a straightforward installation. This kit includes a pair of struts and all specialized hardware required to set your desired ride height.

• Manufacturer Part Number: 373203
• Adjustment Range: 0" to 3" Front Lowering
• Finish: Black
• Components Included: Pair of struts, coil seats, retainer clips, and retainer collars
• Fitment Type: Vehicle-specific bolt-on replacement

Fits 2009-2024 Dodge/Ram 1500 and Ram 1500 Classic models (2WD V8 4-Door).

Lower the center of gravity on your 2WD Ram 1500 while maintaining ride quality with the MaxTrac 2-inch front lowering kit. This system replaces your factory front springs with hot-wound steel lowering coils, precision-engineered to provide a consistent 2-inch drop without compromising suspension travel. To ensure the dampening matches the new spring rate and geometry, the kit includes a pair of MaxTrac front shocks specifically tuned for this lowered application.

Each coil is finished in a durable grey powder coat to resist corrosion and road debris. This kit is a direct-fit solution that utilizes factory mounting points, making it a straightforward upgrade for enthusiasts looking to improve their truck's stance and handling.

• Manufacturer Part Number: 372920-8
• Drop Height: 2-inch Front
• Material: Hot-wound steel springs
• Finish: Grey powder coat
• Included Hardware: (2) Front lowering coils, (2) MaxTrac front shocks
• Installation: Bolts to factory locations

Fits select 2009-2025 Dodge/Ram 1500 and 1500 Classic models.

Fine-tune your vehicle's stance with MaxTrac Suspension front adjustable lowering struts. These struts offer a customizable drop ranging from 0 to 3 inches, allowing you to level the front end or achieve a significant drop without sacrificing shock travel or ride quality. Engineered as a direct replacement for factory units, they utilize a threaded body design for precise height adjustments.

• Adjustable lowering range: 0 to 3 inches
• Durable black finish for corrosion resistance
• Maintains factory-like ride quality while lowering center of gravity
• Includes coil seats, retainer clips, and retainer collars
• Bolt-on installation to factory mounting locations
• Sold as a pair
• Manufacturer Part Number: 372403

Fits select 2019-2025 Cadillac Escalade, Chevrolet Silverado/Suburban/Tahoe, and GMC Sierra/Yukon 1500 models.

Achieve the exact stance you want for your late-model GM truck or SUV with MaxTrac front adjustable lowering struts. These struts provide a versatile lowering range from stock height down to a full 3-inch drop, allowing for precise chassis tuning to accommodate various wheel and tire combinations. This kit (MPN 371903) replaces the factory front struts, utilizing an adjustable perch system to modify ride height while maintaining proper suspension geometry.

Constructed with a durable black finish, these struts are built to withstand the rigors of daily driving and harsh road conditions. The kit is supplied as a complete pair for the front axle and includes all necessary hardware for a straightforward installation onto factory mounting points.

• Manufacturer Part Number: 371903
• Adjustment Range: 0" to 3" Front Drop
• Compatibility: 2WD and 4WD models
• Finish: Durable Black Powder Coat
• Included Components: Pair of struts, coil seats, retainer clips, and retainer collars