Fits select 2005-2014 Subaru Impreza, WRX, STI, Legacy, and Outback models (2.5L / 3.0L).

Secure your radiator while adding a custom look to your engine bay with the Mishimoto Aluminum Radiator Stay Set. These stays are engineered to replace the dull, stamped-steel factory hardware with high-strength, CNC-machined 6061 aluminum components. The anodized red finish provides long-lasting corrosion resistance and a clean aesthetic that won't chip or peel over time.

• CNC-machined from 6061 aluminum for durability and weight savings
• Vibrant red anodized finish for enhanced engine bay aesthetics
• Direct-fit replacement for factory radiator stays
• Includes a set of two radiator stays
• Manufacturer Part Number: MMRS-STI-08ARD

Fits 1997-2004 Ford Mustang Base, GT, Bullitt, Mach 1, and SVT Cobra (V6-3.8L/3.9L / V8-4.6L/5.4L).

Ensure your radiator stays secure and protected with the Mishimoto Aluminum Radiator Stay Set. Designed specifically for the SN95 and New Edge Mustang chassis, these stays provide a durable alternative to factory brackets that can fatigue over time. By providing a more stable mounting point, this set helps prevent the stress-induced cracking often found on aluminum radiators during spirited driving or track use.

Constructed from high-grade aluminum, these brackets feature a clean finish that enhances the look of your engine bay while maintaining long-term corrosion resistance. They are engineered for a direct-fit installation with both Mishimoto performance radiators and original equipment (OE) units.

• Direct fit for 1997-2004 Ford Mustang
• Constructed from high-grade aluminum for weight savings and durability
• Includes a set of two (2) radiator stays
• Compatible with both OEM and Mishimoto radiators
• Helps prevent radiator mounting point cracking and fatigue
• Manufacturer Part Number: MMRS-MUS-97

Fits 1994-1996 Ford Mustang (Base, GT, GTS, SVT Cobra, and SVT Cobra R).

Secure your cooling system and protect your investment with the Mishimoto Aluminum Radiator Stay Set. The stock OEM Ford upper radiator brackets feature a rigid design that fails to account for the unibody flex inherent to the SN95 chassis during hard driving. When the chassis twists, these rigid brackets transfer stress directly to the radiator, which can lead to fatigue, cracking, and coolant leaks in performance aluminum radiators.

Mishimoto engineered these stays to solve that specific failure point. Constructed from thin-gauge aluminum and paired with soft rubber bushings, these stays allow the radiator to move in harmony with the vehicle's frame. This flexibility prevents the stresses of spirited driving from damaging your radiator's core or end tanks. They are designed for a direct-fit installation with both OEM and aftermarket radiators.

• Replaces rigid factory upper radiator brackets
• Prevents fatigue cracking by allowing for natural chassis flex
• Constructed from durable, lightweight aluminum
• Includes soft rubber bushings for vibration and movement isolation
• Compatible with both Mishimoto and stock Ford radiators
• Includes a set of two (2) radiator stays
• Manufacturer Part Number: MMRS-MUS-94
• Proudly Made in the USA

Fits 1994-2000 Acura Integra, 1996-2000 Honda Civic, and 2000-2009 Honda S2000.

The Mishimoto Aluminum Radiator Stay (MMRS-ARD) replaces your dull, stamped-steel factory hardware with a durable, CNC-machined alternative. Constructed from high-grade 6061 aluminum, this radiator stay provides a secure mount for your cooling system while significantly improving engine bay aesthetics. The vibrant red anodized finish is designed to resist corrosion and maintain its appearance through countless heat cycles.

• Material: CNC-machined 6061 aluminum
• Finish: Anodized Red
• Manufacturer Part Number: MMRS-ARD
• Includes: (1) Radiator Stay

Vehicle Fitment:

Fits select 1994-2009 Honda Civic, S2000, and Acura Integra.

Replace your flimsy factory radiator bracket with the Mishimoto MMRS-A Aluminum Radiator Stay. This component provides a secure mounting point for your radiator while significantly cleaning up the appearance of your engine bay. Precision CNC-machined from high-strength 6061 aluminum, this stay is designed to withstand the heat and vibrations of high-performance driving without the corrosion or wear associated with OE stamped-steel brackets.

• Manufactured from CNC-machined 6061 aluminum for durability and weight savings
• Available in multiple anodized finishes: silver, black, blue, red, and gold
• Direct replacement for the factory radiator stay
• Manufacturer Part Number: MMRS-A
• Includes (1) radiator stay

Vehicle Fitment:

• 1994-2000 Acura Integra (GS, GS-R, LS, RS, SE, Type R)
• 1996-2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si, Value Package)
• 2000-2009 Honda S2000 (Base, CR)

Fits select 2015-2020 BMW M3 and M4 models.

This Mishimoto replacement diffuser is engineered specifically for use with the Mishimoto 2015-2020 BMW F80 M3/M4 Skid Plate (MMSD-F80-15). It functions by creating a strategic low-pressure zone directly behind the oil cooler, which actively pulls air through the core to enhance thermal management and cooling efficiency during high-performance driving. The design allows for easy removal, providing a quick solution for drivers who need additional ground clearance for specific terrain or transport. Built for durability and precise fitment, this component is backed by the Mishimoto Lifetime Warranty.

• Specifically designed for use with Mishimoto Skid Plate (MMSD-F80-15)
• Creates a low-pressure zone behind the oil cooler to maximize airflow evacuation
• Improves cooling system efficiency by maintaining high-velocity air throughput
• Easily removable design for increased ground clearance when required
• Precision-engineered for 2015-2020 BMW M3 and M4 chassis
• Manufacturer Part Number: MMRP-F80SD-DIF

Fits most import vehicles requiring a small-style radiator cap.

Optimizing a performance cooling system requires attention to the components that maintain system integrity under pressure. The Mishimoto High-Pressure 2.0 Bar Radiator Cap is engineered to withstand the increased thermal loads of high-performance driving. While factory caps are often rated for lower pressures, this 2.0 bar (28 psi) cap significantly raises the coolant boiling point, preventing fluid from prematurely escaping into the overflow reservoir and keeping it circulating within the engine block and radiator.

This small-style cap features an ergonomic design for easier grip during installation or removal. It serves as a durable replacement for standard small-profile caps that may fail under the high-pressure conditions found in modified or hard-driven vehicles.

• Pressure Rating: 2.0 bar (28 psi)
• Raises coolant boiling point for improved thermal efficiency
• Ergonomic design for easy installation and removal
• Fitment: Small-style radiator filler necks common on import vehicles
• Manufacturer Part Number: MMRC-20-SM

Maintain optimal cooling system pressure during high-performance driving with the Mishimoto 1.3 Bar High-Pressure Radiator Cap. Specifically designed for most domestic vehicles requiring a large-style cap, this component replaces factory caps that often vent prematurely under the stress of heavy loads or track conditions.

By increasing the system pressure to 1.3 Bar (19 psi), this cap effectively raises the boiling point of your engine coolant. This creates a more stable and efficient cooling system, keeping fluid inside the radiator rather than allowing it to leak into the overflow reservoir. Each cap features an ergonomic design to provide a better grip for installation and removal.

• Manufacturer Part Number: MMRC-13L
• Pressure Rating: 1.3 Bar (19 psi)
• Fitment: Fits most domestic vehicles with large-style radiator necks
• Function: Increases boiling point and prevents coolant loss to the overflow tank
• Design: Ergonomic shape for easier handling

Maintain optimal cooling system pressure and enhance engine bay aesthetics with the Mishimoto 1.3 Bar Carbon Fiber Radiator Cap. Designed specifically for small import vehicle fitments, this high-pressure cap is an essential upgrade for vehicles pushed to their limits on the track or during spirited street driving.

Standard OEM radiator caps are often unable to handle the increased pressure generated by high-performance cooling cycles, which can lead to coolant leaking into the overflow reservoir. By increasing the system pressure to 1.3 Bar (19 psi), this cap effectively raises the boiling point of your engine coolant, ensuring the system remains efficient and the fluid stays where it belongs—circulating through the engine and radiator.

This cap features a hand-laid carbon fiber exterior for a premium finish and an ergonomic design to facilitate easy installation and removal, even in tight engine bays.

• Pressure Rating: 1.3 Bar (19 psi)
• Material: Hand-laid carbon fiber exterior
• Fitment: Designed for most small import vehicles
• Function: Increases boiling point to improve cooling efficiency and prevent overflow
• Manufacturer Part Number: MMRC-13-SMCF

Fits most import vehicles equipped with a small, non-directional radiator filler neck. The Mishimoto High-Pressure 1.3 Bar Radiator Cap is engineered to maintain cooling system integrity during high-performance driving or heavy-load conditions.

Standard OE caps are often unequipped to handle the increased heat and pressure of a modified engine, leading to premature coolant discharge into the overflow reservoir. By increasing system pressure to 1.3 bar (19 psi), this cap effectively raises the boiling point of your coolant, providing a larger thermal margin and preventing boil-over. The integrated high-grade silicone gaskets offer superior durability and a more reliable seal than standard rubber, resisting cracking and heat-cycling degradation over time.

• Pressure Rating: 1.3 Bar (19 psi)
• Style: Small non-directional
• Gasket Material: High-temperature silicone for long-lasting seal
• Design: Ergonomic shape for simplified installation and removal
• Function: Raises coolant boiling point to improve cooling efficiency
• Manufacturer Part Number: MMRC-13-SMC

Designed for select import vehicles and aftermarket radiators requiring a small-style radiator cap, the Mishimoto MMRC-13-SM is an essential cooling system upgrade for high-performance applications.

During aggressive driving or track sessions, cooling system pressures can exceed the limits of a standard OE cap, leading to coolant loss through the overflow reservoir. This high-pressure radiator cap raises the boiling point of your engine coolant by increasing the system pressure to 1.3 bar (19 psi). By keeping the coolant under higher pressure, the system operates more efficiently and maintains thermal stability even under heavy load.

• Rated for 1.3 bar (19 psi) to increase boiling point and cooling efficiency
• Direct fit for most import vehicles and radiators requiring a small radiator cap
• Ergonomic design allows for easy installation and removal
• High-quality construction for reliable pressure management
• Part Number: MMRC-13-SM

Fits select 2002-2024 Subaru Baja, Crosstrek, Forester, Impreza, Legacy, Outback, WRX, and WRX STI. This radiator cap is a direct-fit performance upgrade for your Subaru cooling system, designed to handle the increased heat and pressure of demanding driving conditions.

The Mishimoto High-Pressure 1.3 Bar Radiator Cap replaces your factory cap to raise the boiling point of your engine coolant. By increasing the pressure at which the system releases fluid into the overflow reservoir, it maintains higher cooling efficiency during spirited driving or track use. This specific model features a one-way valve design to match the OEM functionality of your Subaru’s cooling system, ensuring proper coolant recovery and pressure regulation.

• Increased Pressure: Rated at 1.3 bar (19 psi) to raise the coolant boiling point for improved safety and efficiency.
• One-Way Functionality: Engineered to match the factory one-way valve design for reliable cooling system operation.
• Direct Fit: Precision small-style cap designed for a seamless installation on compatible Subaru radiator necks.
• Technical Detail: Includes a non-directional Mishimoto logo sticker to ensure a clean look regardless of final orientation.
• Manufacturer Part Number: MMRC-13-ONWY

Fits select 1991-2021 Ford, Lincoln, and Mercury vehicles including Crown Victoria, F-Series, and Town Car (3.0L).

Maintaining proper cooling system pressure is critical for engine longevity, especially during high-stress driving or towing. The Mishimoto 1.1 Bar Overflow Reservoir Cap is designed to replace aging or failing factory caps that often lose pressure over time. When a cap fails to maintain its rated pressure, it lowers the boiling point of your coolant, increasing the risk of overheating and system failure.

By maintaining a consistent 1.1 bar (16 psi), this cap raises the boiling point of your engine coolant, providing a safer and more efficient cooling system. The ergonomic design ensures easy installation and removal, making it a simple but vital upgrade for your cooling loop.

• Increased Boiling Point: 1.1 bar (16 psi) rating provides higher thermal headroom than worn OE caps.
• Direct Fit: Replaces the factory overflow reservoir cap on supported Ford, Lincoln, and Mercury models.
• Ergonomic Grip: Designed for easy removal and installation even in tight engine bays.
• Mishimoto Lifetime Warranty: Built to last and backed by a comprehensive limited lifetime warranty.

• Manufacturer Part Number: MMRC-11-FRD
• Pressure Rating: 1.1 Bar (16 psi)
• Fits Engines: 3.0L

Fits select 2023-2025 Nissan Z models including Sport, Performance, Nismo, and Proto Spec.

Maintain optimal operating temperatures on the street or track with the Mishimoto Performance Aluminum Radiator. Engineered as a direct-fit replacement, this radiator eliminates the reliability concerns of factory plastic end tanks by utilizing TIG-welded, all-aluminum construction. To withstand the rigors of spirited driving and track use, the core is built with strutted tubes that provide superior resistance to vibration and fatigue.

This performance upgrade features a 48% thicker core and a 51% increase in total core volume, significantly expanding your Z's cooling capacity. The 70% larger tube area maximizes heat transfer efficiency for the VR30DDTT engine. For a complete installation, Mishimoto includes foam seals to optimize airflow through the fan shroud and an extended, slotted drain plug for mess-free maintenance. Manual transmission models can also retain the factory rock guard for added protection against road debris.

• Direct-fit for 2023-2025 Nissan Z (all trims)
• 51% increase in core volume and 48% thicker core over stock
• 70% larger tube area for enhanced heat dissipation
• TIG-welded aluminum construction with strutted tubes for durability
• Includes foam seals for optimized airflow and an extended drain plug
• Compatible with factory rock guard on manual vehicles
• Manufacturer Part Number: MMRAD-Z-23
• Mishimoto Lifetime Warranty

Fits 1991-2001 Jeep Cherokee XJ (Sport, SE, Limited, Country, Laredo, Briarwood, and Classic).

Designed for the rigors of both daily driving and off-road use, the Mishimoto Performance Aluminum Radiator provides a significant upgrade over the factory unit. This radiator features a massive 2-row core that is 100% larger than stock, resulting in a 90% increase in total coolant capacity. To ensure durability on the trail, the core is constructed with strutted tubes and reinforced leading edges to resist flexing and impact damage.

Engineering improvements allow for a 10% increase in coolant flow, which vastly improves heat transfer efficiency to prevent overheating in high-load situations. This direct-fit unit is compatible with both early closed-coolant systems and later open-coolant configurations. Every radiator is backed by the Mishimoto Lifetime Warranty for long-term reliability.

• Manufacturer Part Number: MMRAD-XJ-89
• Core Construction: 2-Row Aluminum
• Coolant Capacity: 90% increase over OEM
• Coolant Flow: 10% increase over OEM
• Features: Strutted tubes and reinforced leading edges
• Compatibility: Fits open and closed coolant systems
• Warranty: Mishimoto Lifetime Warranty

Fits 2022-2025 Subaru WRX Base, GT, Limited, and Premium models. This Mishimoto performance aluminum radiator is designed to eliminate the common failure points and cooling limitations of the factory plastic-tank unit.

The FA24 engine generates significant heat during spirited driving or track sessions. To combat this, Mishimoto utilizes precision TIG-welded aluminum end tanks and a robust 36mm-thick, two-row core. This design provides a 32% increase in core volume and a 50% increase in fin surface area compared to the stock radiator, significantly improving heat dissipation and thermal capacity. The louvered fins are specifically engineered to maximize airflow through the core, ensuring consistent operating temperatures even under high-load conditions.

For easier maintenance, this radiator includes a slotted drain plug to direct coolant flow during service. Like all Mishimoto radiators, this unit is backed by the Mishimoto Lifetime Warranty.

• 36mm thick two-row core for optimal cooling efficiency
• 32% increase in core volume over the factory radiator
• 50% greater fin surface area for superior heat transfer
• TIG-welded aluminum end tanks for long-term durability
• Direct-fit installation with all factory mounting points
• Manufacturer Part Number: MMRAD-WRX-22

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models. This Mishimoto Performance Aluminum Radiator is engineered as a direct-fit cooling upgrade for the FA20-DIT engine, designed to replace the failure-prone factory unit and handle the increased thermal demands of track use or spirited daily driving.

Constructed from 100% brazed aluminum with TIG-welded polished end tanks, this radiator features a lightweight dual-core design that significantly increases fluid capacity and surface area. These improvements allow for a 20°F (11°C) reduction in coolant temperatures and a 15% increase in cooling efficiency over the stock system. The unit installs without any cutting or modifications, maintaining all factory mounting points for a hassle-free setup.

• Direct-fit for 2015-2021 Subaru WRX
• 117% increase in total coolant capacity
• 42% increase in coolant surface area (tubes)
• 34% increase in air surface area
• Includes Mishimoto 1.3 Bar High-Pressure Radiator Cap
• Backed by the Mishimoto Lifetime Warranty, including accident protection
• Manufacturer Part Number: MMRAD-WRX-15

Fits 2002-2007 Subaru Impreza WRX/STI and 2005-2006 Saab 9-2X Aero.

Protect your EJ-powered engine from overheating with the Mishimoto X-Line Performance Aluminum Radiator. Engineered specifically for high-performance builds and aggressive driving, this radiator features a massive three-row core that significantly increases coolant capacity and surface area. This design ensures optimal heat dissipation even under the heavy thermal loads generated by upgraded turbochargers and track use.

Construction features a 100% brazed aluminum core and precision TIG-welded end tanks, providing much higher pressure and heat tolerance than factory radiators with plastic end tanks. To further optimize the cooling system, Mishimoto includes two high-pressure 1.3 bar radiator caps (for the radiator and expansion tank) to raise the boiling point of the coolant. A magnetic drain plug is also included to capture circulating metallic debris, adding an extra layer of protection for your engine internals.

• Three-row aluminum core provides maximum surface area and coolant capacity
• Full aluminum construction with robust TIG-welded end tanks for long-term durability
• High-efficiency brazed core design improves heat transfer
• Includes two 1.3 bar high-pressure radiator caps and a magnetic drain plug
• Direct fit for manual transmission models
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-WRX-01X

Fits 2002-2007 Subaru Impreza WRX/STI and 2005-2006 Saab 9-2X Aero.

The Mishimoto Performance Aluminum Radiator (MMRAD-WRX-01) is engineered to eliminate the primary failure point of the factory cooling system: the plastic end tanks. Over years of thermal cycling, OEM plastic becomes brittle and prone to cracking, which can lead to overheating and severe engine damage. This all-aluminum upgrade provides the heat and pressure tolerance required for both aggressive track use and reliable daily commuting.

Constructed from high-grade aluminum with a 100% brazed core and precision TIG-welded end tanks, this radiator significantly increases coolant capacity and improves heat dissipation. It is a direct bolt-in unit that installs without modifications. Each radiator includes a high-pressure 1.3 bar radiator cap to effectively raise the boiling point of your coolant, plus a secondary cap for the expansion tank.

• Full aluminum construction with robust TIG-welded end tanks for maximum durability
• 100% brazed aluminum core provides optimal heat transfer and pressure resistance
• Increased coolant capacity for superior thermal management during aggressive driving
• Direct fitment for manual transmission models with no modification required
• Includes 1.3 bar high-pressure radiator cap and expansion tank cap
• Manufacturer Part Number: MMRAD-WRX-01
• Mishimoto Lifetime Warranty

Fits 1987-2006 Jeep Wrangler YJ and TJ models equipped with 2.4L, 2.5L, 4.0L, or 4.2L engines and manual or automatic transmissions.

The Mishimoto MMRAD-WRA-87 Performance Aluminum Radiator is engineered to provide superior cooling for Jeep Wranglers frequently pushed to their limits on and off the trail. This radiator eliminates the common failure point of OEM radiators—the plastic end tanks—by utilizing 100% brazed aluminum construction with durable, TIG-welded end tanks. The high-efficiency two-row core is 1.88 inches thick, significantly increasing the cooling surface area and providing a 68% increase in fluid capacity compared to the factory unit.

Whether you are crawling at low speeds or cruising at highway RPMs, this direct-fit upgrade ensures your cooling system can manage the heat. The unit is designed for a drop-in installation without the need for extensive vehicle modification.

• Full aluminum construction with durable TIG-welded end tanks
• Features a two-row, 1.88-inch thick core for maximum heat dissipation
• Increases fluid capacity by 68% over the stock radiator
• Includes magnetic drain plug to capture metallic debris in the cooling system
• Manufacturer Part Number: MMRAD-WRA-87

Fits select 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Rubicon, Sahara, Sport, Sport S, Moab, X, 70th/75th Anniversary).

The Mishimoto Performance Aluminum Radiator V2 (MMRAD-WRA-07V2) is engineered to solve the cooling challenges common in the Jeep Wrangler JK platform. Building on the previous generation, the V2 design introduces significant structural improvements and increased thermal capacity to handle the demands of off-road driving and high-load conditions.

To combat the core flex and fatigue that can lead to leaks in off-road environments, this radiator utilizes extruded, internally strutted tubes. This internal reinforcement provides superior rigidity and pressure tolerance compared to standard tube designs. The V2 also features a substantial increase in surface area and fluid volume over the factory unit, resulting in improved heat dissipation and lower operating temperatures.

• Direct fit for 2007–2018 Jeep Wrangler JK models
• Extruded tubes with internal struts for increased strength and pressure resistance
• 18% increase in core volume, fin area, and external tube area over stock
• 13% increase in coolant capacity for improved thermal regulation
• Fully brazed aluminum construction with precision TIG-welded tanks
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-WRA-07V2

Fits select 2011-2024 Dodge Durango and Jeep Grand Cherokee (6.4L).

High-performance Hemi engines demand robust thermal management to maintain optimal operating temperatures on the street or the track. The Mishimoto Performance Aluminum Radiator replaces the failure-prone factory unit with a heavy-duty, all-aluminum design. By eliminating plastic end tanks, this radiator provides superior durability against the high pressures and temperature cycles of a modern cooling system.

Engineering for efficiency, Mishimoto increased the core volume by 66% and expanded coolant capacity by 95% over the stock radiator. The 66% thicker core provides 45% more fin surface area, significantly improving heat dissipation. Each unit is precision TIG-welded with CNC-machined mounting points to ensure a direct-fit installation with no modifications required.

• 66% increase in core volume and 95% increase in coolant capacity over stock
• 45% greater fin surface area for improved heat transfer
• All-aluminum construction with precision TIG-welded end tanks
• CNC-machined mounts for a direct-fit installation
• Magnetic drain plug included to capture metallic debris in the cooling system
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-WK2-12

The Mishimoto Race Ready V2 Universal Aluminum Performance Radiator (MMRAD-UNI-RRV2) is engineered for high-demand cooling in custom builds and race applications. This radiator features a 1.26-inch thick dual-pass core, designed to maximize coolant dwell time and heat dissipation compared to standard single-pass units.

Constructed from TIG-welded, aircraft-grade aluminum, the core utilizes strutted tubes capable of withstanding pressures exceeding 100 psi while resisting structural flexing during high-G cornering or off-road use. The inlet and outlet ports feature 1-5/8in-12 female threads, allowing for a modular setup with Mishimoto’s interchangeable -16AN, -20AN, 1.25", or 1.5" fittings (sold separately).

• Dual-pass core design for high-efficiency heat transfer
• Fully brazed aluminum core with strutted tubes for 100+ psi pressure tolerance
• 1-5/8in-12 female threaded ports for adaptable fitting configurations
• Heavy-duty TIG-welded construction for long-term durability
• Manufacturer Part Number: MMRAD-UNI-RRV2
• Backed by the Mishimoto Lifetime Warranty

Engineered to meet the specific thermal demands of high-performance drag racing, the Mishimoto Universal Drag Race Performance Aluminum Radiator (MMRAD-UNI-DRGN) provides a durable and efficient cooling solution for custom builds. This radiator features a full aluminum construction with a natural finish, designed to withstand the vibration and pressure common in track environments.

For maximum plumbing flexibility, the radiator is equipped with threaded 16ORB inlet and outlet ports. This allows for the use of various -16AN fittings (sold separately) or the included 1.25-inch barbed adapters for standard slip-on hoses. To simplify maintenance regardless of mounting orientation, magnetic drain plugs are installed on both end tanks to trap metallic debris and ensure clean fluid flow. Multiple mounting points and universal brackets are included to accommodate various chassis configurations.

• Threaded 16ORB inlet and outlet ports for versatile plumbing options
• Includes two 1 1/4-inch (32mm) barbed adapters for slip-on radiator hoses
• Dual magnetic drain plugs (one on each end tank) to capture metallic contaminants
• Multiple mounting points with included universal brackets for custom installation
• Natural aluminum finish for a clean, professional appearance
• Manufacturer Part Number: MMRAD-UNI-DRGN
• Protected by the Mishimoto Lifetime Warranty

Engineered specifically for the demands of the strip, the Mishimoto Universal Drag Race Performance Aluminum Radiator provides high-efficiency cooling in a compact, durable package. This radiator is designed with versatility in mind, featuring threaded 16ORB inlet and outlet ports that allow for a wide range of plumbing options using -16AN fittings or the included barbed adapters.

Constructed from high-quality aluminum with a sleek black finish, this unit includes magnetic drain plugs on both end tanks to simplify maintenance and ensure fluid can be drained regardless of the radiator's mounting orientation. The package comes complete with universal mounting brackets and multiple mounting points to facilitate installation in custom race builds.

• Direct fit for universal drag racing applications
• Threaded 16ORB inlet and outlet for -16AN fitting compatibility
• Includes two 1 1/4" barbed adapters for standard slip-on hoses
• Dual magnetic drain plugs for easier maintenance
• Lightweight aluminum construction with durable black finish
• Includes universal mounting brackets and hardware
• Mishimoto Lifetime Warranty
• MPN: MMRAD-UNI-DRGBK

Engineered for the rigorous demands of competitive racing, the Mishimoto Universal Circle Track Radiator provides the cooling efficiency required for both 4-cylinder and V8 engines. Designed for use on both dirt and asphalt tracks, this radiator is built to maintain optimal fluid temperatures during high-intensity sessions.

The unit features a full aluminum construction with a brazed core for maximum pressure tolerance and durability. Its high-efficiency two-row core measures 2.24 inches in thickness, significantly increasing fluid capacity to ensure superior heat dissipation. This universal design is compatible with both manual and automatic transmission applications.

• Overall Dimensions: 31in x 19in x 3in
• Core Thickness: 2.24in
• Rows: 2
• Construction: Full Aluminum with Brazed Core
• Fitment: Universal Circle Track (V8 or 4-Cylinder)
• Compatibility: Manual and Automatic Transmissions
• Manufacturer Part Number: MMRAD-UNI-CT

The Mishimoto Universal Aluminum Radiator (MMRAD-UNI-25) is a high-performance cooling solution designed for custom engine swaps and specialized automotive projects. Engineered to provide superior thermal management, this radiator features a heavy-duty three-row core measuring 2.08 inches thick, significantly increasing fluid capacity and cooling efficiency compared to standard OEM units.

Constructed from aircraft-quality aluminum with a fully brazed core, this radiator is built for maximum durability and pressure tolerance. The polished end tanks provide a professional aesthetic for show-quality engine bays, while the universal design ensures a versatile fitment for builders requiring exceptional fluid temperature reduction.

• Manufacturer Part Number: MMRAD-UNI-25
• Overall Dimensions: 25" x 16" x 3"
• Core Thickness: 2.08 inches
• Configuration: 3-Row Core
• Material: Aircraft-grade aluminum
• Construction: Brazed core with polished end tanks
• Performance: Increases cooling efficiency by up to 30%

Fits 2007-2021 Toyota Tundra and 2008-2021 Toyota Sequoia (5.7L).

The Toyota Tundra and Sequoia are known for their reliability, but as the second-generation platform ages, factory cooling components become a liability. The stock radiator relies on plastic end tanks that harden and become brittle after thousands of heat cycles, leading to sudden cracks and coolant leaks. The Mishimoto Performance Aluminum Radiator eliminates this failure point with full aluminum, TIG-welded construction for maximum durability under heavy load or towing conditions.

This radiator features a strategically designed 42mm, 2-row core that significantly outperforms the original equipment. By increasing coolant capacity by 70% and core volume by 12%, this unit provides superior heat dissipation and thermal efficiency. To ensure a seamless installation, Mishimoto includes new radiator mounting brackets to replace the factory plastic brackets which often fail during teardown.

• Full aluminum construction with durable TIG-welded end tanks
• 42mm, 2-row core for optimized heat transfer
• 70% increase in coolant capacity and 12% increase in core volume
• 15% increase in external fin surface area for improved cooling
• Includes new mounting brackets for a hassle-free installation
• Manufacturer Part Number: MMRAD-TUN-07
• Mishimoto Lifetime Warranty

Fits 2004-2014 Nissan Titan, 2005-2014 Nissan Armada, and 2004-2013 Infiniti QX56 (5.6L).

The VK56-powered Nissan Titan and Armada have earned a reputation as reliable workhorses, but years of heavy use and thousands of heat cycles eventually take a toll on the factory cooling system. The original equipment radiator uses plastic end tanks that are prone to becoming brittle and leaking over time. Even more critical is the failure of the stock internal transmission cooler fittings, which can crack and allow coolant to mix with transmission fluid, often resulting in catastrophic transmission failure.

The Mishimoto MMRAD-TTN-04 Performance Aluminum Radiator is engineered as a durable, high-efficiency solution to these common failure points. This radiator features a 2-row core that is 38% thicker than stock, providing a 37% increase in total core volume for superior heat dissipation. The end tanks are constructed from aircraft-grade aluminum and are precision TIG-welded for maximum pressure tolerance and long-term durability. To ensure your transmission remains protected, the internal cooler features CNC-machined fittings that are integral to the lower tank construction.

• 37% increase in core volume over stock for significantly improved cooling capacity
• 2-row core is 38% thicker than the factory radiator for better heat transfer
• Full aircraft-grade aluminum construction with precision TIG-welded end tanks
• Integrated CNC-machined transmission cooler fittings prevent leaks and drivetrain failure
• Direct fitment using factory mounting points
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-TTN-04

Fits 2002-2008 Mini Cooper S and 2008 Mini Cooper S Clubman (Note: Will not fit R56 chassis).

The Mishimoto Performance Aluminum Radiator is engineered as a direct-fit replacement for the factory unit, requiring no cutting, fabrication, or modification for installation. Designed to improve cooling capacity and prevent overheating, this radiator is an essential upgrade for both daily driving and performance applications where maintaining proper engine temperatures is critical for longevity.

This radiator features a 100% brazed aluminum core with polished aluminum end tanks that are TIG-welded for superior durability and pressure resistance. The high-efficiency core design significantly increases fluid capacity and optimizes heat dissipation compared to the stock unit.

• Direct OEM fit for select 2002-2008 Mini models
• Full aluminum construction with durable, TIG-welded end tanks
• High-efficiency 1.57-inch (40mm) two-row brazed aluminum core
• Increased coolant capacity for superior thermal management
• Polished finish for improved engine bay aesthetics
• Includes magnetic drain plug to capture metallic debris
• Manufacturer Part Number: MMRAD-TINY-01