Fits 1998-2007 Toyota Land Cruiser and Lexus LX470 (Base models).

Replace the failure-prone factory radiator in your 100-series with the Mishimoto Performance Aluminum Radiator. Designed specifically for the Toyota J100 platform, this upgrade addresses the common issue of brittle stock plastic end tanks by utilizing full aircraft-quality aluminum construction and precision TIG-welded tanks. It features a massive 56mm-thick, two-row core that provides a 19% increase in core volume and a 26.5% increase in coolant capacity over the original equipment.

This radiator is built to handle the higher thermal loads of towing, heavy-duty use, or off-roading. Every unit includes a 1.3 bar high-pressure radiator cap to raise the boiling point of your coolant and a magnetic drain plug to capture metallic debris within the cooling system. As with all Mishimoto aluminum radiators, it is designed for a direct-fit installation into the factory mounting points.

• Full aluminum construction with durable TIG-welded end tanks
• 56mm thick, two-row core for improved heat dissipation
• 19% increase in core volume and 26.5% increase in fluid capacity
• Includes high-pressure 1.3 bar radiator cap and magnetic drain plug
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-LCR-99

Fits 1981-1990 Toyota Land Cruiser Base.

The Mishimoto Performance Aluminum Radiator for the 1981-1990 Toyota Land Cruiser FJ60 is a heavy-duty cooling solution designed to replace the aging, brittle factory unit. Built with aircraft-quality aluminum, this radiator features end tanks that are precision TIG-welded to a high-efficiency 3-row brazed aluminum core. This robust construction provides a significant upgrade in cooling capacity and long-term reliability over the original plastic-and-aluminum design.

This radiator is equipped with an internal transmission cooler to maintain optimal fluid temperatures for automatic transmissions, yet remains fully compatible with manual models. For added protection, a magnetic drain plug is included to capture metallic debris circulating within the cooling system. Like all Mishimoto radiators, this FJ60 upgrade is backed by a lifetime warranty, ensuring craftsmanship and performance for the life of your vehicle.

• Direct-fit for 1981-1990 Toyota Land Cruiser FJ60 models
• High-efficiency 3-row brazed aluminum core
• All-aluminum construction with durable TIG-welded end tanks
• Integrated internal transmission cooler for automatic applications
• Includes magnetic drain plug (M12 x 1.5) and 1.3 bar radiator cap
• Manufacturer Part Number: MMRAD-LCR-81X

Fits 1975-1984 Toyota Land Cruiser Base models.

The Mishimoto MMRAD-LCR-58X aluminum radiator is a high-performance cooling upgrade designed to replace the aging, brittle stock radiator in your FJ40. This radiator features a 3-row brazed aluminum core, significantly increasing fluid capacity and improving thermal efficiency compared to factory units.

Engineered for long-term reliability in demanding conditions, the radiator is constructed with durable, aircraft-quality aluminum end tanks that are precision TIG-welded to the core. This unit includes an internal transmission cooler, making it a compatible solution for both manual and automatic transmission applications. To help protect your engine's cooling system, each radiator includes a magnetic drain plug to capture and remove metallic debris.

• 3-row core design for maximum cooling surface area
• Full aluminum construction with precision TIG-welded end tanks
• Integrated internal transmission cooler for automatic transmission fluid management
• Includes M12 x 1.5 magnetic drain plug to trap metallic fragments
• Manufacturer Part Number: MMRAD-LCR-58X
• Backed by the Mishimoto Lifetime Warranty

Fits 1996-2000 Honda Civic (EK chassis) equipped with a K-Series engine swap.

The Mishimoto K-Series Performance Aluminum Radiator is designed specifically to solve the cooling challenges of K20 and K24 engine swaps in the 1996-2000 Honda Civic. This radiator provides a direct bolt-in cooling solution, eliminating the need for custom fabrication or awkward universal mounting. Built for durability and heat dissipation, it features a full aluminum core with TIG-welded end tanks to handle the increased pressures of a high-performance swap.

• Direct bolt-in fitment for K-series swapped EK chassis
• Full aluminum construction with durable TIG-welded end tanks
• Simplifies engine swap plumbing and mounting
• Increased cooling capacity over stock single-core radiators
• Manufacturer Part Number: MMRAD-K20-EK

Vehicle Fitment

Fits 1992-1995 Honda Civic and 1993-1997 Honda Civic del Sol (K-Series Engine Swaps).

The Mishimoto MMRAD-K20-EG aluminum radiator is engineered specifically to provide a drop-in cooling solution for K-swapped EG and del Sol chassis. This half-size radiator simplifies the engine swap process by including integrated ports for both the fan switch and the coolant temperature sensor, eliminating the need for external adapters or custom drilling. Built for high-performance driving, it features a full aluminum core with TIG-welded end tanks for maximum durability under pressure.

• Direct bolt-in installation with no trimming or mount alterations required
• Heavy-duty TIG-welded aluminum construction for increased longevity
• Integrated sensor ports to maintain factory-style wiring and cooling control
• Includes a 1.3 bar high-pressure Mishimoto radiator cap
• Manufacturer Part Number: MMRAD-K20-EG

Fits select 2014-2020 Chevrolet Silverado/Suburban/Tahoe, GMC Sierra/Yukon, and Cadillac Escalade models equipped with V8 engines. This Mishimoto performance aluminum radiator is a direct-fit upgrade engineered to maximize cooling efficiency for daily drivers, work trucks, and off-road vehicles.

Constructed from high-quality aluminum with a 2-inch thick core, this radiator provides a 45.45% increase in coolant capacity over the factory unit. To further improve thermal management, Mishimoto increased the tube surface area by 92.8% and the fin surface area by 74.5% compared to the stock radiator. For long-term durability in high-stress environments, the design features strutted tubes in the top and bottom eight rows, reinforcing the core against vibration and pressure cycles.

This radiator is designed for a seamless installation, featuring built-in oil and transmission coolers equipped with stock-style fittings. Whether you are towing heavy loads or navigating trails, the MMRAD-K2-14 ensures your V8 engine maintains optimal operating temperatures.

• Direct-fit for 2014-2020 GM V8 trucks and SUVs
• 2-inch thick core for maximum heat dissipation
• 45.45% increase in coolant capacity over stock
• 92.8% increase in tube surface area and 74.5% increase in fin surface area
• All-aluminum construction with TIG-welded tanks
• Integrated transmission and oil coolers with OE-style fittings
• Manufacturer Part Number: MMRAD-K2-14
• Mishimoto Lifetime Warranty

Fits 1996-2001 Toyota Chaser (JZX100).

The Mishimoto Performance Aluminum Radiator is designed to provide maximum cooling efficiency for JZ-powered platforms. This unit replaces the failure-prone factory plastic end tanks and thin core with a heavy-duty, full-aluminum assembly. TIG-welded for superior durability, it is built to withstand the increased pressures and temperatures of performance driving. The radiator features a 2.2-inch thick, three-row brazed aluminum core, offering a massive 107% increase in core volume over the stock radiator to prevent overheating and maintain optimal engine temperatures.

• Full aluminum construction with durable, TIG-welded end tanks
• Three-row, 2.2-inch thick efficiently brazed aluminum core
• 107% increase in core volume over the factory radiator
• Polished aluminum finish for improved engine bay aesthetics
• Includes Mishimoto Lifetime Warranty for long-term reliability
• Manufacturer Part Number: MMRAD-JZX100-96

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator models equipped with the 2.0L engine.

The modern Jeep cooling stack is notoriously cramped, particularly in the 2.0L turbo configuration where an additional heat exchanger competes for airflow. The Mishimoto Performance Aluminum Radiator is engineered to maximize thermal efficiency within these tight factory constraints, providing a significant cooling upgrade for both technical trails and daily driving. It replaces the failure-prone factory radiator with a robust, all-aluminum unit designed to handle the rigors of off-roading.

Built for durability, this radiator features full aluminum, TIG-welded end tanks that withstand the vibration and repeated thermal cycling that often cause factory plastic tanks to leak or crack. The core utilizes extruded and strutted tubes to resist chassis flex during high-articulation off-road use, ensuring structural integrity where other radiators fail.

• 51% increase in core volume over the stock radiator for vastly improved cooling efficiency.
• 38% greater coolant capacity to manage higher thermal loads under stress.
• 37% increase in fin surface area to optimize heat transfer away from the engine.
• Oversized single-row core design makes the most of the limited cooling stack footprint.
• Heavy-duty TIG-welded aluminum construction for superior longevity.
• Direct-fit design retains factory mounting points for a straightforward installation.
• Manufacturer Part Number: MMRAD-JL-18
• Includes the Mishimoto Lifetime Warranty.

Fits 2007-2018 Jeep Wrangler JK models equipped with a HEMI V8 conversion. This Mishimoto performance aluminum radiator is engineered to handle the increased thermal demands of a HEMI engine swap while maintaining the durability required for off-road use.

This radiator features a dual-pass design, forcing coolant to travel through the core twice for maximum heat dissipation. The high-capacity core provides an 18-percent increase in core volume, fin surface area, and external tube area over the stock Wrangler unit. To ensure longevity under trail stress, Mishimoto utilizes extruded, internally strutted tubes that reinforce the core against chassis flex and high-pressure cycles, significantly reducing the risk of fatigue cracks and leaks.

• Specifically designed for HEMI-swapped 2007-2018 Jeep Wrangler JK models
• 18% increase in core volume and surface area over stock radiator
• 13% increase in total coolant capacity
• Dual-pass flow pattern for improved cooling efficiency
• Extruded tubes with internal struts for superior structural rigidity
• Direct-fit design retains factory radiator fan, A/C condenser, and transmission cooler mounting
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-JK-HEMI

Fits 2001-2005 Lexus IS300 Base and Sportcross models with manual transmission.

Protect your engine from overheating and thermal fatigue with the Mishimoto performance aluminum radiator. Engineered as a direct-fit upgrade for the 2001-2005 Lexus IS300, this radiator requires no cutting or modification for installation. It is designed to provide a 30% increase in cooling efficiency over the stock unit, making it an essential component for both daily driving and performance applications.

The MMRAD-IS300-01 features a 1.42-inch (36mm) thick, two-row core constructed from 100% brazed aluminum for superior heat dissipation. The TIG-welded end tanks provide exceptional durability against heat cycles and vibration compared to factory plastic tanks. Each radiator comes with a high-pressure 1.3 Bar Mishimoto radiator cap to raise the boiling point of your coolant and enhance system safety.

• Direct fit for 2001-2005 Lexus IS300 manual transmission
• Two-row, 1.42-inch thick brazed aluminum core
• Full aluminum construction with TIG-welded end tanks for durability
• Increased fluid capacity and heat dissipation over OEM
• Includes high-pressure 1.3 Bar radiator cap
• Manufacturer Part Number: MMRAD-IS300-01

Fits 1994-2001 Acura Integra GS, GS-R, LS, RS, Special Edition, and Type R models equipped with manual transmissions.

The Mishimoto X-Line Performance Aluminum Radiator is engineered to provide maximum cooling efficiency for the B-series and B18-powered Integra, whether used for daily driving or demanding track sessions. This X-Line model features a massive 3-row core that is 25% thicker than standard Mishimoto performance radiators, providing a significant increase in coolant capacity and heat dissipation.

Construction includes 16% thinner tubes than stock, allowing for a higher density of rows and greater surface contact area to pull heat away from the engine more effectively. As a direct-fit component, this radiator installs into factory mounting points with no cutting or permanent vehicle modification required. Each unit comes equipped with a 1.3 bar high-pressure radiator cap to raise the boiling point of your coolant for improved safety under high-load conditions.

• Full aluminum construction with durable TIG-welded end tanks
• Triple-core X-Line design for 25% more thickness than standard upgrades
• 16% thinner tubes for increased cooling fin density
• Includes 1.3 bar high-pressure Mishimoto radiator cap
• Direct OEM fitment for manual transmission applications
• Manufacturer Part Number: MMRAD-INT-94X

Fits 1994-2001 Acura Integra (GS, GS-R, LS, RS, Special Edition, and Type R) equipped with manual transmissions.

The Mishimoto performance aluminum radiator (MPN: MMRAD-INT-94) is engineered to provide superior cooling efficiency for both street and track applications. This unit replaces the failure-prone factory radiator and its plastic end tanks with a fully brazed, two-row aluminum core and TIG-welded end tanks for maximum durability. At 1.65 inches thick, this radiator increases fluid capacity and significantly improves heat dissipation over the stock unit.

Designed for a direct-fit installation, this radiator bolts to factory mounting points without the need for cutting or vehicle modification. Every Mishimoto radiator is built to withstand high-performance driving while protecting your engine from overheating during high-load conditions.

• Brazed 1.65-inch thick aluminum core for efficient heat transfer
• Full TIG-welded aluminum construction for long-term durability
• Two-row design increases fluid capacity and cooling surface area
• Includes 1.3 bar high-pressure Mishimoto radiator cap
• Direct OEM fit for 1994-2001 Integra manual transmission models
• Manufacturer Part Number: MMRAD-INT-94

Fits 1990-1993 Acura Integra GS, GS-R, LS, and RS models with manual transmissions.

The Mishimoto Performance Aluminum Radiator is engineered as a direct-fit upgrade to replace restrictive factory units in your DA Integra. Designed for both daily driving and high-stress track conditions, this radiator maximizes cooling efficiency to protect your engine from overheating. The construction features a two-row brazed aluminum core that provides significantly increased fluid capacity and superior heat dissipation compared to the stock unit.

Every radiator is constructed with full aluminum, TIG-welded end tanks for long-term durability and resistance to the fatigue that causes plastic OE tanks to crack. Installation is a straightforward process with no cutting or modifications required, maintaining original equipment mounting points. To further improve cooling performance, a high-pressure 1.3 bar Mishimoto radiator cap is included to raise the boiling point of your coolant system.

• Direct-fit for 1990-1993 Acura Integra manual transmission models
• Two-row, brazed aluminum core for maximum heat transfer
• Full aluminum construction with durable TIG-welded end tanks
• Includes 1.3 bar high-pressure radiator cap
• Increases fluid capacity for better thermal management
• Manufacturer Part Number: MMRAD-INT-90

Efficiently manage intake air temperatures in high-horsepower forced induction applications with the Mishimoto Universal Dual-Pass Air-to-Water Heat Exchanger (MMRAD-HE-04). This heat exchanger is engineered to support liquid-to-air intercooler systems on builds producing up to 1,500 hp, ensuring consistent cooling performance for big-turbo and supercharged setups.

Constructed from 100% aluminum with TIG-welded end tanks, this unit features a strategically designed dual-pass flow pattern. The 2-row core provides maximum surface area for heat dissipation without sacrificing fluid flow. For simplified installation, Mishimoto integrated half-inch thick threaded mounting bosses onto each end tank, providing robust points for custom bracketry.

• Supports forced induction systems up to 1500 hp
• Dual-pass flow configuration for optimized heat transfer
• High-efficiency 2-row aluminum core
• Durable TIG-welded all-aluminum construction
• Includes 1/2-inch thick threaded mounting bosses for secure installation
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-HE-04

The Mishimoto MMRAD-HE-03 Universal Dual-Pass Air-to-Water Heat Exchanger provides essential thermal management for high-output forced induction builds. As turbocharger efficiency and power levels increase, charge-air cooling becomes critical; this heat exchanger is specifically engineered to reduce coolant temperatures within a liquid-to-air intercooler loop before the fluid returns to the intercooler core. It is rated to support builds producing up to 1,000 hp.

Constructed from high-grade aluminum with precision TIG-welding, this unit is built to withstand the rigors of high-performance use. The dual-pass, two-row core design maximizes fluid residence time and heat dissipation for superior cooling efficiency. To simplify custom fabrication and installation, Mishimoto integrated 1/2-inch thick threaded mounting bosses onto each end tank, providing a secure and versatile mounting solution.

• MPN: MMRAD-HE-03
• Configuration: Dual-pass flow for optimal heat dissipation
• Core Specs: High-efficiency 2-row core
• Performance Rating: Supports up to 1,000 hp
• Construction: All-aluminum, TIG-welded end tanks
• Mounting Hardware: Integrated 1/2-inch thick threaded bosses
• Warranty: Mishimoto Lifetime Warranty

The Mishimoto Universal Single-Pass Air-to-Water Heat Exchanger is engineered to provide efficient charge-air cooling for high-performance forced induction builds. Designed to support systems up to 750 hp, this heat exchanger significantly reduces coolant temperatures before the fluid enters the intercooler, ensuring lower intake air temperatures and preventing heat soak during high-load operation.

Built for durability in demanding environments, this unit features a 3-row core optimized for maximum heat dissipation. The all-aluminum construction is fully TIG-welded, ensuring robust end tanks that can withstand the pressures of a dedicated cooling loop. To simplify custom fabrication and mounting, Mishimoto integrated 1/2-inch thick threaded mounting bosses into each end tank, providing secure attachment points for a variety of vehicle configurations.

• Provides effective cooling support for charge-air systems up to 750 hp
• High-efficiency 3-row core designed for maximum heat dissipation
• Universal single-pass configuration fits a wide range of custom plumbing setups
• Full aluminum, TIG-welded construction for maximum reliability
• Integrated 1/2" thick threaded mounting bosses for easier installation
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-HE-02

Designed for forced induction builds, the Mishimoto Universal Single-Pass Air-to-Water Heat Exchanger (MMRAD-HE-01) provides critical cooling for liquid-to-air intercooler systems. This heat exchanger is engineered to reduce coolant temperatures before the fluid enters the intercooler, ensuring consistent charge-air cooling for applications producing up to 500 HP.

Built for durability and thermal efficiency, this unit features all-aluminum, TIG-welded construction. The strategically designed 3-row core provides maximum surface area for heat dissipation without compromising flow. To simplify installation, Mishimoto integrated 1/2-inch thick threaded mounting bosses on each end tank, providing a secure and versatile mounting solution for custom configurations.

• Supports charge-air cooling systems for builds up to 500 HP
• Single-pass flow configuration with a high-efficiency 3-row core
• Robust all-aluminum, TIG-welded construction for long-term reliability
• Integrated 1/2-inch thick threaded mounting bosses for ease of installation
• Manufacturer Part Number: MMRAD-HE-01
• Includes Mishimoto Lifetime Warranty

Fits 2010-2023 Lexus GX460 (4.6L).

Whether you are tackling rugged trails or cruising the interstate, the Mishimoto Performance Aluminum Radiator is a critical upgrade for the 2010-2023 Lexus GX460. This direct-fit radiator is engineered to solve the cooling challenges of the 4.6L engine, providing a 40% increase in core volume over the factory unit. The 40mm thick core ensures significantly higher cooling capacity, making it ideal for off-roading, towing, or high-heat environments where stock radiators often fail.

Built for long-term reliability, this radiator features full aluminum construction with precision TIG-welded end tanks, eliminating the common failure point of cracked plastic tanks found in OE units. It also includes an integrated in-tank liquid-to-liquid stacked plate transmission cooler to maintain optimal gearbox temperatures. For added protection, a magnetic drain plug is included to capture metallic debris within your cooling system.

• Direct-fit replacement for the 2010-2023 Lexus GX460
• 40mm thick core offers 40% more volume than stock
• Full aluminum construction with durable TIG-welded tanks
• Integrated stacked-plate transmission fluid cooler
• Billet aluminum fill neck and magnetic drain plug included
• Manufacturer Part Number: MMRAD-GX460-10
• Back by the Mishimoto Lifetime Warranty

Fits 2005-2006 Pontiac GTO Base models.

Keep your Pontiac GTO on the road and out of the shop by upgrading to the Mishimoto Performance Aluminum Radiator. Factory radiators utilize plastic end tanks prone to cracking and leaking after years of heat cycles. This Mishimoto upgrade is engineered for superior reliability, featuring 100% all-aluminum construction with TIG-welded end tanks for optimal heat dissipation and long-term durability.

At the heart of this radiator is a 2-row brazed aluminum core that increases fluid capacity by 0.64 L while providing a proven reduction in coolant temperatures of 15°F (6°C). For automatic and manual applications, it includes an integrated in-tank transmission fluid cooler compatible with stock lines, making this a true bolt-on performance solution. Each radiator comes equipped with a 1.3 Bar High-Pressure Radiator Cap to raise the boiling point and a Magnetic M12 x 1.5 drain plug to capture metallic debris within the cooling system.

• Core Construction: 2-row brazed aluminum core with TIG-welded end tanks
• Cooling Performance: Proven 15°F (6°C) reduction in coolant temperatures
• Increased Capacity: 0.64 L increase in fluid capacity over stock
• Included Hardware: Mishimoto 1.3 Bar High-Pressure Radiator Cap and Magnetic M12 x 1.5 Drain Plug
• Transmission Cooler: Integrated in-tank cooler compatible with OEM lines
• Manufacturer Part Number: MMRAD-GTO-05
• Warranty: Mishimoto Lifetime Warranty

Fits the 2004 Pontiac GTO Base.

Protect your drivetrain from overheating with the Mishimoto Performance Aluminum Radiator, engineered as a direct-fit upgrade for the 2004 Pontiac GTO. Unlike factory radiators with plastic end tanks prone to failure over time, this unit features 100% brazed aluminum construction and TIG-welded end tanks for superior durability and heat dissipation. The high-efficiency 2-row core increases coolant capacity by 0.64 L and is proven to reduce coolant temperatures by 15°F (6°C), making it an essential upgrade for both daily driving and competitive autocross or drag strip use.

This radiator is designed for seamless integration, featuring an in-tank transmission fluid cooler compatible with stock transmission cooler lines. To further protect your engine, it includes a magnetic M12 x 1.5 oil drain plug to capture metallic debris within the cooling system. As a testament to its build quality, this radiator is backed by the Mishimoto Lifetime Warranty.

• Direct fit for 2004 Pontiac GTO
• Full aluminum construction with TIG-welded end tanks
• Large 2-row brazed core for maximum cooling efficiency
• Includes in-tank transmission cooler for OE line compatibility
• Includes M12 x 1.5 magnetic oil drain plug
• Fluid Capacity Increase: 0.64 L
• Temperature Reduction: 15°F (6°C)
• MPN: MMRAD-GTO-04

Fits 2023-2026 Toyota GR Corolla Circuit Edition, Core, Morizo Edition, Premium, and Premium Plus (1.6L).

The Toyota GR Corolla pushes its 1.6L three-cylinder engine to the limit, generating significant thermal loads during spirited driving and track sessions. Because the GRC utilizes a liquid-to-liquid oil cooler that relies on the engine coolant to regulate oil temperatures, maintaining cooling efficiency is critical. The Mishimoto Performance Aluminum Radiator addresses this by replacing the restrictive stock plastic end tank unit with a robust, all-aluminum design engineered for high-performance use.

This radiator features a 51% increase in core volume over the factory unit, allowing for a higher coolant capacity and superior heat dissipation. The core utilizes strutted tubes for maximum rigidity—essential for resisting leaks caused by chassis flex or track-day debris—and louvered fins to optimize airflow and heat transfer. For added utility, Mishimoto integrated reinforced intercooler mounts to support larger aftermarket upgrades and an extended drain port with a slotted plug for cleaner maintenance.

• Direct fit for the 2023-2026 Toyota GR Corolla (1.6L)
• 51% increase in core volume over stock for improved thermal management
• All-aluminum construction with TIG-welded end tanks for long-term durability
• Single-row core design with strutted tubes and louvered fins
• Reinforced intercooler mounts for increased support
• Includes foam shrouding to prevent airflow bypass
• Manufacturer Part Number: MMRAD-GRC-23
• Mishimoto Lifetime Warranty

Fits select 1999-2014 Cadillac Escalade, Chevrolet Silverado/Avalanche/Suburban/Tahoe, GMC Sierra/Yukon/Yukon XL, and Hummer H2 models.

The Mishimoto MMRAD-GMT-99 Performance Aluminum Radiator is a heavy-duty cooling upgrade designed for the demands of full-size GM trucks and SUVs. Engineered to replace the factory unit, this direct-fit radiator features a high-efficiency 92% thicker core that provides a 72% increase in coolant capacity. The all-aluminum construction and TIG-welded tanks offer superior durability over the stock plastic-tank units, especially during heavy towing or high-temperature operation.

Technical testing in real-world conditions showed a 46°F reduction in radiator outlet temperatures and a 25°F drop in transmission fluid temperatures. This radiator includes integrated engine oil and transmission cooler ports with pre-installed fittings to maintain full factory functionality while extending the lifespan of your drivetrain components.

• Direct-fit for select 1999-2014 GM trucks and SUVs
• 92% thicker core than factory radiator
• 72% increase in total coolant capacity
• 69% increase in cooling fin surface area
• Proven 46°F reduction in outlet temperatures
• Integrated transmission and engine oil cooler ports
• Fully TIG-welded aluminum construction for maximum durability
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-GMT-99

Fits select 1999-2006 Audi TT, Audi TT Quattro, and Volkswagen Golf, GTI, and Jetta (1.8T / 2.0T). This Mishimoto performance aluminum radiator is engineered to solve the cooling deficiencies and failure-prone plastic end tanks of the original equipment. Designed for a direct-fit installation, it features CNC-machined quick-disconnect inlet and outlet ports that mate perfectly with your factory radiator hoses without modification.

Constructed from high-quality aircraft-grade aluminum, this radiator utilizes a 1.57-inch (40mm) thick, dual-row brazed core. This design significantly increases fluid capacity and surface area compared to stock, providing superior heat dissipation for street performance or track use. The TIG-welded construction ensures long-term durability against the vibrations and thermal expansion cycles of high-performance engines.

• Direct fit for 1999-2006 Audi/VW 1.8T and 2.0T applications
• Dual-row, 1.57-inch thick brazed aluminum core for maximum cooling efficiency
• Precision CNC-machined quick-disconnect fittings for factory hose compatibility
• All-aluminum TIG-welded construction replaces plastic end tanks
• Increased coolant capacity for better thermal management
• Manufacturer Part Number: MMRAD-GLF-99

Fits select 1994-1999 Volkswagen Golf and Jetta models (GTI VR6, GLS, and GLX) equipped with manual transmissions.

Upgrade your cooling system with the Mishimoto performance aluminum radiator, designed to provide superior heat dissipation and increased fluid capacity compared to the factory unit. This radiator is engineered for a direct-fit installation, replacing the failure-prone plastic end tanks of the original equipment with durable, TIG-welded polished aluminum tanks. Its full aluminum construction ensures long-term reliability for both daily driving and performance use.

The radiator features a high-efficiency dual-row core measuring 1.57 inches (40mm) in thickness. This 100% brazed aluminum design maximizes surface area to prevent overheating and maintain optimal engine temperatures during high-load conditions. The bolt-on design ensures a straightforward installation process that utilizes factory mounting points with no cutting or modifications required.

• Manufacturer Part Number: MMRAD-GLF-94
• Core Thickness: 1.57 inches (40mm)
• Rows: 2
• Material: 100% brazed aluminum core with TIG-welded end tanks
• Finish: Polished aluminum
• Included: Mishimoto radiator and magnetic drain plug

Fits 2010-2012 Hyundai Genesis Coupe models including 2.0T and 3.8L variants.

Manage engine temperatures more effectively with the Mishimoto Performance Aluminum Radiator (MMRAD-GEN6-10). This radiator is engineered as a direct-fit upgrade to the stock unit, designed to handle the high heat output of both the turbocharged 2.0L and high-displacement 3.8L V6 engines. By utilizing a dual-row brazed aluminum core, this unit provides increased fluid capacity and enhanced heat dissipation, which Mishimoto testing suggests can lead to a 30-degree Fahrenheit drop in temperatures compared to the OEM radiator.

Constructed with durable, TIG-welded end tanks and a 1.34-inch thick core, this radiator is built for longevity and performance. It installs without modification, mounting directly to factory locations for a straightforward replacement that ensures your engine runs cooler and more efficiently under demanding conditions.

• Direct OEM fit for 2010-2012 Hyundai Genesis Coupe
• Two-row, 1.34-in thick brazed aluminum core
• Full aluminum construction with TIG-welded end tanks
• Increased coolant capacity for superior thermal management
• Manufacturer Part Number: MMRAD-GEN6-10

Fits 2010-2012 Hyundai Genesis Coupe (2.0T / 3.8).

Manage high engine temperatures with the Mishimoto Performance Aluminum Radiator. Designed specifically for the 2010-2012 Hyundai Genesis Coupe, this radiator is a direct-fit upgrade over the factory unit, offering significantly improved cooling efficiency for both stock and turbocharged applications. The full aluminum construction and 100% TIG-welded end tanks provide superior durability to withstand the rigors of high-performance driving.

• Direct OEM fit with no modifications required for installation
• Features a two-row, 1.97-inch (50mm) thick brazed aluminum core
• Compatible with both stock and aftermarket front-mount intercoolers
• Full aluminum construction with durable TIG-welded end tanks
• Includes high-pressure 1.3 Bar radiator cap
• Manufacturer Part Number: MMRAD-GEN4-10

Fits 1993-1998 Subaru Impreza Base, Brighton, L, LS, LX, Outback, and RS models (2.2L).

Engineered to replace the failure-prone factory radiator, the Mishimoto performance aluminum radiator provides a significant cooling upgrade for your 1993-1998 Subaru Impreza GC8. This radiator features a 100% brazed aluminum dual-row core designed to provide a 30-percent increase in cooling capacity over the stock unit. By increasing fluid capacity and improving heat dissipation, this radiator helps maintain stable operating temperatures and prevents overheating during spirited driving or heavy loads.

Constructed from aircraft-quality aluminum with TIG-welded end tanks and a polished finish, this unit is built for long-term durability and a precise fit. Note: This radiator is designed for non-turbo models with manual transmissions.

• Full aluminum construction with durable TIG-welded end tanks
• Two-row, 2.05-inch thick brazed aluminum core for maximum efficiency
• Increased fluid capacity for superior thermal management
• Polished end tanks for an improved under-hood aesthetic
• Manufacturer Part Number: MMRAD-GC8-93

Fits 2021-2026 BMW M2, M3, and M4 models (including Base, Competition, CS, and CSL variants). These rock guards are specifically designed for use with Mishimoto Performance Auxiliary Radiators.

Protect your cooling system from costly road debris with the Mishimoto Auxiliary Radiator Rock Guards. Specifically engineered for the G8X chassis, these guards serve as a critical line of defense against stones and track-day hazards that can puncture radiator fins. Constructed from high-strength steel with a durable powder-coated finish, these guards are built to withstand harsh driving conditions while resisting corrosion and rust over the life of the vehicle.

Installation is straightforward, with a design tailored to fit the Mishimoto Performance Auxiliary Radiators perfectly. This kit is essential for owners who want to maintain the cooling efficiency and longevity of their BMW M-series engine. Like all Mishimoto components, these guards are backed by a Lifetime Warranty.

• Specifically designed for Mishimoto Performance Auxiliary Radiators
• Constructed from high-quality powder-coated steel
• Durable, corrosion-resistant finish for long-term protection
• Sold as a pair for complete coverage
• Manufacturer Part Number: MMRAD-G80-21ARG
• Mishimoto Lifetime Warranty

Fits 2021-2026 BMW M2, M3, and M4 (Base, Competition, CS, and CSL).

Manage engine temperatures on your G8X platform with Mishimoto Performance Auxiliary Radiators. Sold as a pair, these radiators replace restrictive factory units to provide the increased cooling capacity required for high-performance driving and track conditions. The custom-engineered cores offer a 25-percent increase in volume over the stock components, ensuring more effective heat dissipation for both factory and modified S58 engines.

Engineered for durability, these radiators feature full-aluminum end tanks that are TIG-welded to the cores. The internal strutted tubes provide critical reinforcement against heavy vibrations and potential road debris impacts, a common failure point in performance applications. These units install into factory mounting points for a secure, direct-fit solution.

• 25-percent increase in core volume for improved heat transfer
• Full-aluminum, TIG-welded end tanks for maximum durability
• Strutted tubes reinforce the core against vibration and impacts
• Sold as a pair (left and right sides)
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMRAD-G80-21A

Fits 2008-2009 Pontiac G8 Base, GT, and GXP models (6.0L).

Protect your V8 from overheating with the Mishimoto Performance Aluminum Radiator. Designed as a direct-fit upgrade for the 2008-2009 Pontiac G8, this radiator replaces the restrictive factory unit featuring a thin core and failure-prone plastic end tanks. Its 100% brazed aluminum construction and TIG-welded end tanks ensure superior durability under the stress of daily commuting or high-performance track use.

This performance radiator features a 56mm (2.2-inch) thick, two-row core that provides a 39-percent increase in core volume over the stock setup. The custom-engineered design is available in a polished finish and maintains full compatibility with both manual and automatic transmission vehicles. Like all Mishimoto radiators, this unit is backed by a lifetime warranty for long-term cooling reliability.

• Direct fit for the 2008-2009 Pontiac G8
• All-aluminum construction with durable, TIG-welded end tanks
• Features a two-row, 56mm (2.2in) thick core for maximum heat dissipation
• 39% increase in core volume over the factory radiator
• Polished aluminum finish
• Manufacturer Part Number: MMRAD-G8-08