A Mishimoto performance aluminum radiator is the ideal upgrade to the stock Honda Prelude radiator.Designed and engineered to maximize cooling efficiency, boost engine functions and protect your car from overheating.Whether you're a daily driver or you take your car to the track, installing an upgraded radiator is essential if you want to lower your risk of engine failure.The Mishimoto performance aluminum radiator features a lightweight three row core, 100-percent brazed aluminum, and polished end tanks which will enhance the overall performance of your engine.Every Mishimoto aluminum radiator is a direct OEM fit, making installation effortless with no cutting or modification required.All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a lifetime warranty.A perfect match to the Prelude Racing Thermostat.

• Includes 1.3 Bar High-Pressure Radiator Cap which effectively raises the boiling point of engine coolant, providing a safer and more efficient system
• Two-row, 2-in thick brazed aluminum core provides efficient fluid temperature reduction
• Full aluminum construction featuring high-quality, durable TIG-welding

This Part Fits:

By replacing your current Subaru Legacy radiator with a Mishimoto performance aluminum radiator, you will notice a cooler more efficient running engine.With its lightweight dual core, 100-percent brazed aluminum, and polished tank ends, installing a direct OEM fit Mishimoto radiator is effortless, no cutting or modification is required.All Mishimoto radiators come with a magnetic drain plug and a lifetime warranty.

• Effectively regulates fluid temperatures, ideal for use during aggressive driving such as autocross, rallycross, track days, etc.
• Full aluminum construction featuring high-quality, durable TIG-welding
• Two-row, 2-in thick brazed aluminum core for optimal heat transfer

This Part Fits:

The performance aluminum radiator is the ideal upgrade to the stock radiator especially for those looking to enhance the overall performance and lifetime of their engine.With a direct OEM fit installation is effortless, no cutting or modification is required.All Mishimoto radiators are designed and engineered to maximize cooling efficiency and most importantly protect your vehicle from overheating.Fits the Dodge Stealth and the Mitsubishi 300GT.

• Effectively regulates fluid temperatures, ideal for use during aggressive driving such as drifting, autocross, rallycross, track days, etc.
• Full aluminum construction featuring high-quality, durable TIG-welding
• Two-row, 2.05-in thick brazed aluminum core for optimal heat transfer

This Part Fits:

The 2003-2009 Toyota 4Runner V8 is known for its ruggedness, reliability, and off-road capability, but as they grow older the stock parts are starting to show their age. Over time, the factory radiator can develop issues such as leaks, corrosion, or clogging. Upgrading to a new Mishimoto performance aluminum radiator can prevent these problems before they occur, saving you from potential breakdowns on the trail. For those who use their 2003-2009 Toyota 4Runner for off-roading, this radiator can handle the additional strain and heat generated during these activities, providing better reliability and performance in rugged conditions. Our direct-fit radiator features a 40mm thick core for increased cooling capacity. Constructed entirely from aluminum with durable, TIG-welded end tanks, it includes an efficient in-tank liquid-to-liquid stacked plate transmission cooler for optimal transmission fluid temperature control. The radiator also comes with a magnetic drain plug to capture metallic debris in your cooling system and is backed by the Mishimoto Lifetime Warranty for peace of mind.

• Efficient in-tank liquid-to-liquid stacked plate transmission cooler provides optimal control of transmission fluid temperatures
• Full aluminum construction with durable, TIG-welded end tanks
• 40mm thick core provides increased cooling capacity

This Part Fits:

Whether you take your car to the track or use it as a daily driver, an upgraded cooling system is essential in maintaining a well balanced efficiently running engine.The performance aluminum radiator is the ideal upgrade to the stock radiator especially for those looking to enhance the overall performance and lifetime of their engine.With a direct OEM fit installation is effortless, no cutting or modification is required.All Mishimoto radiators are designed and engineered to maximize cooling efficiency and most importantly protect your vehicle from overheating.Fits the Dodge Stealth and Mitsubishi 3000GT.

• Two-row, brazed aluminum core provides ideal fluid temperatures during street or track driving
• Robust full aluminum construction with TIG-welded end tanks
• Polished finish improves engine bay aesthetics

This Part Fits:

2002 Chrysler Sebring 2.7 Liter 21M5, 2004 Chrysler Sebring 2.7 Liter 21M5, 2001-2003 Chrysler Sebring 2.7 Liter A578, 2004 Chrysler Sebring 2.7 Liter F5M42-2, 2003 Chrysler Sebring 2.7 Liter T-850, 2002 Chrysler Sebring 3.0 Liter 21M5, 2004 Chrysler Sebring 3.0 Liter 21M5, 2001-2003 Chrysler Sebring 3.0 Liter A578, 2002-2003 Dodge Stratus 2.7 Liter 21M5, 2001-2002 Dodge Stratus 2.7 Liter A578, 2001 Dodge Stratus 2.7 Liter F5M42-2, 2003 Dodge Stratus 2.7 Liter F5M42-2, 2005 Dodge Stratus 2.7 Liter F5M42-2, 2002-2005 Dodge Stratus 2.7 Liter F5M51-1, 2003-2004 Dodge Stratus 2.7 Liter T-850, 2002 Dodge Stratus 3.0 Liter 21M5, 2001-2002 Dodge Stratus 3.0 Liter A578, 2001 Dodge Stratus 3.0 Liter F5M42-2, 2001-2005 Dodge Stratus 3.0 Liter F5M51-1, 2003-2004 Dodge Stratus 3.0 Liter T-850, 2000-2005 Mitsubishi Eclipse 3.0 Liter F5M51-1

• Includes 1.3 Bar High-Pressure Radiator Cap which effectively raises the boiling point of engine coolant, providing a safer and more efficient system
• Two-row, 1.97-in thick brazed aluminum core provides ideal fluid temperatures for use in the most demanding environments
• Full aluminum construction featuring high-quality, durable TIG-welding

This Part Fits:

Introducing the ultimate upgrade for track enthusiasts – the Mishimoto Track-Ready Aluminum Radiator for the 2009-2020 Nissan 370z. With a lightweight and track-focused design, this radiator eliminates the A/C condenser, making it the perfect choice for those looking for a cooling solution that can withstand the toughest of track conditions.----This radiator is crafted from high-quality, aircraft-grade aluminum. It features durable TIG-welded end tanks and a two-row, 1.57-in brazed aluminum core with a highly dense fin composition for improved cooling efficiency. It also provides 0.43 gal of additional coolant capacity, ensuring your engine stays cool and runs smoothly during even the most intense track sessions.----This track-ready radiator has been proven to reduce outlet temperatures by an impressive 40-degrees, providing 20-percent greater cooling efficiency when compared to the stock radiator. In addition, this radiator features a magnetic drain plug that traps metallic debris and protects vital cooling components from damage and clogs.----Like all Mishimoto products, the Mishimoto Track-Ready Aluminum Radiator for the 2009-2020 Nissan 370z is backed by the Mishimoto Lifetime Warranty.

• Lightweight, track-focused design eliminates AC condenser
• Provides 0.43 gal of additional coolant capacity
• Fits 2009-2020 Nissan 370Z

This Part Fits:

The Mishimoto performance aluminum radiator for the 2009-2020 Nissan 370Z is an ideal upgrade to the OEM radiator.Are you sick of watching the temperature gauge creep upwards during your track days and in stop and go traffic? The Mishimoto aluminum radiator has been proven to reduce temperatures by 20 degrees and offers increased capacity over the stock unit.The Mishimoto radiator is crafted from high quality aircraft aluminum and is precision TIG welded for durability and longevity.This Mishimoto 2009-2020 Nissan 370Z radiator also includes a built in AC condenser which simplifies the installation process and alleviates potential headaches.As with all of our products this radiator is protected by the Mishimoto lifetime warranty.

• Two-row, 1.57-in brazed aluminum core features extremely dense fin composition for improved cooling efficiency
• Full aluminum construction featuring high-quality, durable TIG-welding
• Incorporated Mishimoto AC condenser for ease of installation

This Part Fits:

Your stock or modified 350Z demands a cooling system that can properly maintain optimal coolant temperatures. An inefficient cooling system can result in overheating, increased engine wear, and potential engine failure. Upgrade your factory plastic radiator with the Mishimoto Nissan 350Z Performance Aluminum Radiator. Our performance radiator features all-aluminum construction and precision robotic TIG-welding for consistency and durability. This radiator features a thick, 2-row brazed aluminum core capable of reducing coolant temperatures significantly. This radiator includes a Mishimoto 1.3 Bar High Pressure Radiator Cap, which effectively raises the boiling point of your coolant to create a safer and more efficient system. The Mishimoto 350Z Performance Aluminum Radiator features a magnetic oil drain plug with dowty seal and robust threads for durable repeated installation and superior protection against leaks. The sturdy aluminum end tanks feature a subtle brushed finish that complements any engine bay perfectly! As with all our products, this radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Includes magnetic drain plug with dowty seal
• Brushed aluminum finish
• Robotic TIG-welding

This Part Fits:

Over the last decade, the 350Z has become one of the best values in used sports cars. The effective suspension, capable engine, and attractive silhouette produce an excellent platform for any form of motorsport from drift to autocross. But, as the modifications and uses for this chassis become more extreme, those pushing their 350Z to the absolute limit need a more efficient radiator. That's why Mishimoto has created this X-Line Performance Aluminum Radiator for the 2002-2006 Nissan 350Z. Our engineering team first focused on improving the radiator's core, specifically the tube and fin specifications. This X-line 350Z radiator's core features more densely packed fins, resulting in a massive 92-percent increase in external fin area over the stock 350Z radiator. Greater fin surface area means improved heat transfer, which translates to cooler engine temperatures. Our 36mm core also dwarfs the 16mm stock unit, providing a 117-percent increase in overall core volume. Our X-line 350Z radiator features precision TIG-welded aluminum end tanks to withstand anything the road or track can throw at it. This radiator also includes a Mishimoto magnetic drain plug to capture any metallic contaminants within your engine coolant and further protect your cooling system. As with all our Nissan 350Z products, this Mishimoto X-line Performance Aluminum Radiator for the 2003-2006 Nissan 350Z includes our signature Mishimoto Lifetime Warranty for a lifetime of cooling performance.

• Strategically engineered core provides 92-percent increase in external fin area over stock
• 36mm-thick core yields 117-percent increase in core volume over stock
• 75-percent increase in fluid capacity over stock

This Part Fits:

Keep your Z on the road and out of the shop with the Mishimoto Nissan 350Z Performance Aluminum Radiator! Every high-performance vehicle demands a cooling system that can maintain temperatures during both routine and competitive driving. The Mishimoto 350Z performance radiator features all-aluminum construction and precision robotic TIG-welding for consistency and durability. This radiator features a thick, 2-row brazed aluminum core capable of reducing coolant temperatures significantly. This radiator also includes a Mishimoto 1.3 Bar High Pressure Radiator Cap, which effectively raises the boiling point of your coolant to create a safer and more efficient system. The Mishimoto 350Z Performance Aluminum Radiator features a magnetic oil drain plug with dowty seal and robust threads for durable repeated installation and superior protection against leaks. The sturdy aluminum end tanks feature a subtle brushed finish that complements any engine bay perfectly! As with all our products, this radiator includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Includes magnetic drain plug with dowty seal
• Brushed aluminum finish
• Robotic TIG-welding

This Part Fits:

The Mishimoto Nissan 300ZX performance aluminum radiator is engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly protect your car from overheating whether you drive your vehicle daily or take it for track runs.The Mishimoto aluminum Nissan 300ZX radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine.Every Mishimoto aluminum radiator is a direct OEM fit, making installation effortless with no cutting or modification required.This is the ideal upgrade to the stock Nissan 300ZX radiator.

• Includes 1.3 Bar High-Pressure Radiator Cap which effectively raises the boiling point of engine coolant, providing a safer and more efficient system
• Two-row, 2.05-in thick brazed aluminum core provides optimal fluid temperature reductions during aggressive driving and/or hot-weather environments
• Full aluminum construction featuring high-quality, durable TIG-welding

This Part Fits:

The Mishimoto performance aluminum radiator for the Nissan 240SX is designed and engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly, protect your car from overheating whether you drive your vehicle daily or take it for track runs.The Mishimoto aluminum Nissan 240SX radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine.Every Mishimoto aluminum radiator is a direct OEM fit, making installation effortless with no cutting or modification required.This is the ideal upgrade to the stock Nissan 240SX radiator.All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty.For even more cooling efficiency check out the Mishimoto lightweight Nissan fan shroud for your 240sx.

• Includes 1.3 Bar High-Pressure Radiator Cap which effectively raises the boiling point of engine coolant, providing a safer and more efficient system
• Two-row, 1.97-in thick brazed aluminum core provides ideal fluid temperatures on and off the track
• Full aluminum construction featuring high-quality, durable TIG-welding

This Part Fits:

The Mishimoto performance aluminum radiator for the Nissan 240SX is designed and engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly, protect your car from overheating whether you drive your vehicle daily or take it for track runs.The Mishimoto aluminum Nissan 240SX radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine.Every Mishimoto aluminum radiator is a direct OEM fit, making installation effortless with no cutting or modification required, making this the ideal upgrade to the stock Nissan 240SX radiator.Check out the Mishimoto lightweight aluminum Nissan 240sx fan shroud for even more cooling efficiency.

• Includes 1.3 Bar High-Pressure Radiator Cap, which effectively raises the boiling point of engine coolant, providing a safer and more efficient system
• Two-row, 1.97-in thick brazed aluminum core provides ideal fluid temperatures on and off the track
• Full aluminum construction featuring high-quality, durable TIG-welding

This Part Fits:

Injection control pressure (ICP) sensor failure is quite common for high mileage 6.0L Powerstroke models. Typical indicators of sensor/harness failure include hard starting, rough idle, and power cutting out. Using our extensive experience with the Ford Powerstroke, our team identified the need for a more durable and economical replacement for the factory sensor and pigtail harness. The Mishimoto Powerstroke Injector Control Pressure Sensor Kit includes a high-quality sensor, a replacement harness pigtail, and heat-shrink butt connectors for installation. Our sensor is engineered for precise fitment and meets all OEM specifications. Often, the factory pigtail connector becomes contaminated with oil, causing shorts and issues with sensor reading. Because of this, we highly recommend replacing the pigtail when swapping the sensor. As with all our products, this Injector Control Pressure Sensor Kit includes our signature Mishimoto Lifetime Warranty.

• Includes new pigtail harness eliminating issues from potentially contaminated stock connector
• High-quality replacement sensor meets all OEM specifications
• Restores engine performance and startup capability

This Part Fits:

A portion of all proceeds will be donated via the Mishimoto Chilly Cares program

• A portion of all proceeds will be donated via the Mishimoto Chilly Cares program
• Our Mishimoto decal looks great on any car, truck, or bike
• Measures 10-in x 1.25-in

A portion of all proceeds will be donated via the Mishimoto Chilly Cares program

• A portion of all proceeds will be donated via the Mishimoto Chilly Cares program
• Mishimoto Lifetime Warranty
• N/A

Mishimoto Promotional Medium Vinyl Banner 33.75x65 inches

• Mishimoto Lifetime Warranty
• N/A

A portion of all proceeds will be donated via the Mishimoto Chilly Cares program

• A portion of all proceeds will be donated via the Mishimoto Chilly Cares program
• Mishimoto Lifetime Warranty
• N/A

The Mishimoto Oil Filter Sandwich Plate Adapters are made with 3 NPT ports to allow you to install an oil temperature sensor, oil pressure sensor, and/or a turbo oil feed.This easy-to-install plate eliminates the need to drill into your block by using the mounting point on your engine oil filter.Two adapters are included with purchase for fitment with multiple applications.

• Three 1/8-in NPT ports (with plug) for sensors/oil feed/etc.
• 6061 aluminum, CNC-machined
• M20 x 1.5 and 3/4-UNF

Whether you have a daily driven Subaru or a built Audi 20V, proper oil temperatures are crucial for engine longevity and performance. Keep your temperatures in check with the Mishimoto thermostatic sandwich plate. This high-flow sandwich plate is constructed from lightweight CNC-machined billet 6061 aluminum, providing unmatched precision and quality. The internal oil thermostat will restrict flow to your heat exchanger until the activation temperature is reached; this provides improved warm-up while maintaining efficient cooling properties. Thanks to a small footprint and rear-mounted thermostat, the Mishimoto sandwich plate can be installed in even the tightest engine bays where the exhaust or other engine components create strict space constraints. This sandwich plate includes two 1/8 NPT ports for use with temperature or pressure sensors. As with all our products, this sandwich plate includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Two 1/8-in NPT ports (with plug) for sensors/oil feed/etc
• Built-in thermostat (185 F / 85 C)
• 6061 aluminum, CNC-machined

This Mishimoto Thermostatic Oil Sandwich Plate is a lightweight, high-flow sandwich plate built from 6061 Aluminum.The built-in thermostat prevents oil flow to the cooler until the engine oil reaches activating temperature, allowing for both a faster warmup at startup and extra oil system protection in cold climates.The included 185 degree Fahrenheit thermostat can be changed with a 160 or 200 degree unit, adding unparalleled control over your desired engine oil operating temperature.

• 1/8-in NPT port (with plug) for sensors/oil feed/etc.
• Built-in thermostat (185F / 85C)
• 6061 aluminum, CNC-machined

This Mishimoto Oil Sandwich Plate is a lightweight, high-flow sandwich plate that's built from 6061 aluminum. It's used to add an external cooler to your vehicles oil system. This Oil Sandwich Plate is designed specifically for M22 Stainless Steel Center Bolts and includes two 1/8in NPT plugged ports for optional sensors or gauges as well as our Mishimoto Lifetime Warranty.

• Two 1/8-in NPT Ports (with plug) for sensors/oil feed/etc.
• CNC-Machined 6061 Aluminum
• Square O-ring design

This Mishimoto Oil Sandwich Plate is a lightweight, high-flow sandwich plate that's used to regulate oil flow to the cooler until the engine is properly warmed up and allows for oil system protection in cold climates.

• Two 1/8-in NPT ports (with plug) for sensors/oil feed/etc.
• 6061 aluminum, CNC-machined
• Square O-ring design

Looking for ideal fluid temperature regulation for your next project? Mishimoto has the answer with our innovative, ingenious in-line oil thermostat. This sleek unit features a perfect blend of both form and function, and is precision-engineered to properly regulate engine oil, transmission fluid, or any other driveline fluid. The Mishimoto In-Line Oil Thermostat is CNC-machined from a single piece of billet 6061 aluminum. This component is ideal for projects where space or clearance places a constraint on using a standard oil sandwich plate. The included thermostat regulates temperatures at 185 degrees Fahrenheit, which is easily interchanged with our 160 degree and 200 degree thermostat units to accommodate to any project. This in-line thermostat includes four -10AN fittings with dowty seals for leak-free line connections. Additionally, this thermostat includes a CNC-machined heat-sink which provides an enhancement in style and helps to reduce fluid temperatures. This also includes a universal mounting bracket and the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Universal fitment with a compact design, perfect for use on custom projects where space or clearance is a constraint
• Thermostat unit is easily removed and can be replaced with optional temperatures of 160 F (71 C) or 200 F (93 C)
• Includes 185 F (85 C) internal thermostat which accurately regulates fluid temperatures

Upgrade your street or track Genesis V6 with the all-new Mishimoto CNC-machined aluminum oil filter housing.The factory 3.8L Genesis uses a canister filter in the oil filter housing, which restricts the use of standard oil sandwich plates.This introduces a problem for those who frequently track their vehicles or who have modified vehicles that produce high oil temperatures.Our engineers developed the perfect solution: Replacing the entire oil filter housing with a lightweight CNC-machined aluminum housing allowing for the use of a spin-on oil filter and your choice of oil sandwich plate.The Mishimoto Hyundai Genesis Oil Filter Housing kit includes the housing, stainless steel sandwich-plate adapter, and the appropriate O-rings for installation.This kit gives you the freedom to piece together your own oil cooler setup for unique mounting applications and for vehicles where our direct-fit oil cooler kit is not applicable due to space constraints.As with all our products, the Mishimoto Hyundai Genesis Oil Filter Housing includes our lifetime warranty.

• Changes from cartridge to more convenient spin-on filter
• Allows use of -AN lines to route to oil cooler
• Makes oil changes easier

This Part Fits:

1985-1988 Chevrolet Nova 1.6 Liter, 1985-1988 Chevrolet Nova 1.6 Liter MM5, 1985-1988 Chevrolet Nova 1.6 Liter MM5, 1988 Chevrolet Nova 1.6 Liter MS7, 1988 Chevrolet Nova 1.6 Liter MS7, 1985-1988 Chevrolet Nova 1.6 Liter MX1, 1998-2002 Chevrolet Prizm 1.8 Liter, 1998-2002 Chevrolet Prizm 1.8 Liter MB3, 1998-2002 Chevrolet Prizm 1.8 Liter MB4, 1998-2002 Chevrolet Prizm 1.8 Liter MS7, 1989-1997 Geo Prizm 1.6 Liter, 1990-1992 Geo Prizm 1.6 Liter A240E, 1993-1997 Geo Prizm 1.6 Liter A245E, 1996-1997 Geo Prizm 1.6 Liter MB3, 1996-1997 Geo Prizm 1.6 Liter MB4, 1996-1997 Geo Prizm 1.6 Liter MB5, 1989-1995 Geo Prizm 1.6 Liter MM5, 1989-1995 Geo Prizm 1.6 Liter MM5, 1989-1995 Geo Prizm 1.6 Liter MX1, 1989-1995 Geo Prizm 1.6 Liter MX1, 1993-1997 Geo Prizm 1.8 Liter, 1993-1997 Geo Prizm 1.8 Liter A245E, 1996-1997 Geo Prizm 1.8 Liter MB3, 1996-1997 Geo Prizm 1.8 Liter MB4, 1996-1997 Geo Prizm 1.8 Liter MB5, 1993-1995 Geo Prizm 1.8 Liter MM5, 1990-1991 Lexus ES250 2.5 Liter, 1990-1991 Lexus ES250 2.5 Liter A540E, 1990-1991 Lexus ES250 2.5 Liter E52, 2009-2011 Lexus ES350 3.5 Liter, 2009-2011 Lexus ES350 3.5 Liter U660E, 1998-2000 Lexus GS400 4.0 Liter, 1998-2000 Lexus GS400 4.0 Liter A650E, 2001-2007 Lexus GS430 4.3 Liter, 2001-2005 Lexus GS430 4.3 Liter A650E, 2006 Lexus GS430 4.3 Liter A761E, 2003-2009 Lexus GX470 4.7 Liter, 2003-2009 Lexus GX470 4.7 Liter A750F, 1990-2000 Lexus LS400 4.0 Liter, 1995-1997 Lexus LS400 4.0 Liter A340E, 1995-1997 Lexus LS400 4.0 Liter A340E, 1990-1994 Lexus LS400 4.0 Liter A341E, 1998-2000 Lexus LS400 4.0 Liter A650E, 2001-2006 Lexus LS430 4.3 Liter, 2001-2003 Lexus LS430 4.3 Liter A650E, 2004-2006 Lexus LS430 4.3 Liter A761E, 1996-1997 Lexus LX450 4.5 Liter, 1996-1997 Lexus LX450 4.5 Liter A343F, 1998-2007 Lexus LX470 4.7 Liter, 1998-2002 Lexus LX470 4.7 Liter A343F, 2003-2006 Lexus LX470 4.7 Liter A750F, 2009 Lexus RX350 3.5 Liter, 2009 Lexus RX350 3.5 Liter U151E ...See Application Guide for Additional Fitments

• Billet CNC-machined aluminum for optimal fit and finish
• Included O-ring ensures a perfect seal
• Available in black and red

This Part Fits:

1985-1988 Chevrolet Nova 1.6 Liter, 1985-1988 Chevrolet Nova 1.6 Liter MM5, 1985-1988 Chevrolet Nova 1.6 Liter MM5, 1988 Chevrolet Nova 1.6 Liter MS7, 1988 Chevrolet Nova 1.6 Liter MS7, 1985-1988 Chevrolet Nova 1.6 Liter MX1, 1998-2002 Chevrolet Prizm 1.8 Liter, 1998-2002 Chevrolet Prizm 1.8 Liter MB3, 1998-2002 Chevrolet Prizm 1.8 Liter MB4, 1998-2002 Chevrolet Prizm 1.8 Liter MS7, 1989-1997 Geo Prizm 1.6 Liter, 1990-1992 Geo Prizm 1.6 Liter A240E, 1993-1997 Geo Prizm 1.6 Liter A245E, 1996-1997 Geo Prizm 1.6 Liter MB3, 1996-1997 Geo Prizm 1.6 Liter MB4, 1996-1997 Geo Prizm 1.6 Liter MB5, 1989-1995 Geo Prizm 1.6 Liter MM5, 1989-1995 Geo Prizm 1.6 Liter MM5, 1989-1995 Geo Prizm 1.6 Liter MX1, 1989-1995 Geo Prizm 1.6 Liter MX1, 1993-1997 Geo Prizm 1.8 Liter, 1993-1997 Geo Prizm 1.8 Liter A245E, 1996-1997 Geo Prizm 1.8 Liter MB3, 1996-1997 Geo Prizm 1.8 Liter MB4, 1996-1997 Geo Prizm 1.8 Liter MB5, 1993-1995 Geo Prizm 1.8 Liter MM5, 1990-1991 Lexus ES250 2.5 Liter, 1990-1991 Lexus ES250 2.5 Liter A540E, 1990-1991 Lexus ES250 2.5 Liter E52, 2009-2011 Lexus ES350 3.5 Liter, 2009-2011 Lexus ES350 3.5 Liter U660E, 1998-2000 Lexus GS400 4.0 Liter, 1998-2000 Lexus GS400 4.0 Liter A650E, 2001-2007 Lexus GS430 4.3 Liter, 2001-2005 Lexus GS430 4.3 Liter A650E, 2006 Lexus GS430 4.3 Liter A761E, 2003-2009 Lexus GX470 4.7 Liter, 2003-2009 Lexus GX470 4.7 Liter A750F, 1990-2000 Lexus LS400 4.0 Liter, 1995-1997 Lexus LS400 4.0 Liter A340E, 1995-1997 Lexus LS400 4.0 Liter A340E, 1990-1994 Lexus LS400 4.0 Liter A341E, 1998-2000 Lexus LS400 4.0 Liter A650E, 2001-2006 Lexus LS430 4.3 Liter, 2001-2003 Lexus LS430 4.3 Liter A650E, 2004-2006 Lexus LS430 4.3 Liter A761E, 1996-1997 Lexus LX450 4.5 Liter, 1996-1997 Lexus LX450 4.5 Liter A343F, 1998-2007 Lexus LX470 4.7 Liter, 1998-2002 Lexus LX470 4.7 Liter A343F, 2003-2006 Lexus LX470 4.7 Liter A750F, 2009 Lexus RX350 3.5 Liter, 2009 Lexus RX350 3.5 Liter U151E ...See Application Guide for Additional Fitments

• Billet CNC-machined aluminum for optimal fit and finish
• Included O-ring ensures a perfect seal
• Available in black and red

This Part Fits:

2013-2014 Scion FR-S 2.0 Liter TL70, 2013-2014 Scion FR-S 2.0 Liter TX6A, 2006-2007 Subaru B9 Tribeca 3.0 Liter TG5C7, 2006 Subaru Baja 2.5 Liter TV1B4, 2003-2006 Subaru Baja 2.5 Liter TY754, 2006 Subaru Baja 2.5 Liter TZ1A2, 2003-2005 Subaru Baja 2.5 Liter TZ1A4, 2013-2014 Subaru BRZ 2.0 Liter TL70, 2013-2014 Subaru BRZ 2.0 Liter TX6A, 2005-2006 Subaru Forester 2.5 Liter TV1B5, 2008 Subaru Forester 2.5 Liter TV1B5, 1998 Subaru Forester 2.5 Liter TY752, 1999-2002 Subaru Forester 2.5 Liter TY754, 2003-2008 Subaru Forester 2.5 Liter TY755, 2009-2013 Subaru Forester 2.5 Liter TY758, 2009-2013 Subaru Forester 2.5 Liter TY758, 1998 Subaru Forester 2.5 Liter TZ102, 1999-2002 Subaru Forester 2.5 Liter TZ1A2, 2003-2004 Subaru Forester 2.5 Liter TZ1A3, 2004-2008 Subaru Forester 2.5 Liter TZ1B5, 2009-2013 Subaru Forester 2.5 Liter TZ1B8, 2009-2013 Subaru Forester 2.5 Liter TZ1B8, 1993-1995 Subaru Impreza 1.8 Liter TA102, 1993-1995 Subaru Impreza 1.8 Liter TM702, 1993-1997 Subaru Impreza 1.8 Liter TY752, 1993-1997 Subaru Impreza 1.8 Liter TZ102, 2012-2014 Subaru Impreza 2.0 Liter TR580, 2002-2005 Subaru Impreza 2.0 Liter TV1A4, 2002-2005 Subaru Impreza 2.0 Liter TY754, 2012-2014 Subaru Impreza 2.0 Liter TY758, 1995 Subaru Impreza 2.2 Liter TA102, 1995 Subaru Impreza 2.2 Liter TM702, 1995-1998 Subaru Impreza 2.2 Liter TY752, 1999-2001 Subaru Impreza 2.2 Liter TY754, 1995-1998 Subaru Impreza 2.2 Liter TZ102, 1999-2001 Subaru Impreza 2.2 Liter TZ1A2, 2006-2007 Subaru Impreza 2.5 Liter TV1B4, 1998 Subaru Impreza 2.5 Liter TY752, 1999-2007 Subaru Impreza 2.5 Liter TY754, 2008-2014 Subaru Impreza 2.5 Liter TY758, 2004-2014 Subaru Impreza 2.5 Liter TY856, 1998 Subaru Impreza 2.5 Liter TZ102, 1999-2004 Subaru Impreza 2.5 Liter TZ1A2, 2005-2007 Subaru Impreza 2.5 Liter TZ1B4, 2008-2011 Subaru Impreza 2.5 Liter TZ1B8, 1989-1994 Subaru Justy 1.2 Liter TB40, 1989-1994 Subaru Justy 1.2 Liter TM64F, 1989-1994 Subaru Justy 1.2 Liter TS40 ...See Application Guide for Additional Fitments

• Billet CNC-machined aluminum for optimal fit and finish
• Limited-edition, Subaru-inspired color schemes
• Included O-ring ensures a perfect seal

This Part Fits: