Fits 2018-2023 Ford Mustang GT, GT Premium, Bullitt, and Mach 1 (5.0L).

Protect your Gen 3 Coyote engine from the performance-robbing effects of oil blow-by. With the introduction of direct injection, the 5.0L intake tract is more susceptible to carbon buildup and oily residue, which can lower effective octane levels and increase the risk of detonation. This Mishimoto baffled oil catch can kit intercepts those vapors, using a patent-pending internal baffle and a 50-micron bronze filter to separate oil from the crankcase air before it reaches your intake.

Unlike many air-oil-separator (AOS) systems that drain contaminants back into the oil pan, this catch can permanently traps low-octane oil and fuel vapors, ensuring they never circulate through your engine again. The application-specific bracket is designed to mount the can away from most intake and supercharger kits, preserving space for forced induction setups while remaining easily accessible for service.

• Direct-fit for 2018-2023 Mustang 5.0L (PCV Side)
• 50-micron bronze filter effectively separates oil from air
• Internal baffle prevents collected oil from splashing during spirited driving
• Robust, application-specific mounting bracket for a secure fit
• Includes two direct-fit hoses with factory-style quick-disconnect fittings
• Installation typically completed in under 30 minutes
• Mishimoto Lifetime Warranty
• MPN: MMBCC-MUS8-18PBE

Fits 2008-2010 Ford F-250 and F-350 Super Duty models (6.4L).

The Ford 6.4L Powerstroke is notorious for radiator failures caused by chassis flex and heat cycles. This Mishimoto replacement radiator (MPN: R6375-V2) addresses these common failure points with a direct-fit design that requires zero cutting or modification. It serves as a reliable solution for stock radiators that have developed leaks, clogs, or cracked plastic end tanks.

Constructed with an aluminum core and OEM-spec plastic end tanks, this radiator maintains stock cooling efficiency while improving longevity. To combat the cracking typical of factory units, Mishimoto includes exclusive lower bushings designed to isolate the radiator from frame flex. This isolation prevents the stress-induced leaks that frequently plague the 2008-2010 Super Duty cooling system.

• Direct Fit: Replaces factory unit with no modification required
• Frame Flex Protection: Exclusive Mishimoto lower bushings isolate the core from chassis movement
• Durable Construction: Features an aluminum core with high-grade plastic tanks
• Compatibility: Designed specifically for the 6.4L Powerstroke diesel platform
• Manufacturer Part Number: R6375-V2
• Warranty: Covered by the Mishimoto Lifetime Warranty

Fits 2005-2007 Ford F-250 and F-350 Super Duty models (6.0L).

The Mishimoto R2887-AT Replacement Radiator is a direct-fit solution for Powerstroke owners looking to restore cooling system integrity. Whether you are dealing with a leaking end tank, an aged core, or debris-clogged fins, this radiator provides a reliable alternative to a worn-out factory unit. It is engineered to install seamlessly into the factory mounting points and functions perfectly with all stock engine bay equipment.

• Direct replacement for the factory radiator
• Ideal for replacing aged, clogged, or leaking OE units
• Functions with all stock engine bay equipment and shrouding
• Engineered for reliable thermal management under heavy load
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: R2887-AT

Fits 2005-2007 Ford F-250 and F-350 Super Duty (5.4L / 6.8L).

Maintain your Super Duty's cooling system efficiency with the Mishimoto R2886-AT Replacement Radiator. Designed as a direct-fit OEM replacement, this unit restores reliable cooling performance without requiring modifications, cutting, or bending. It is the ideal solution for replacing an aging stock radiator that has developed leaks, clogged passages, or cracked plastic inlets due to years of heat cycling and clamp pressure.

This radiator features a high-quality aluminum core paired with OEM-spec plastic end tanks to match factory cooling standards and ensure a perfect fit. It utilizes factory mounting points and is fully compatible with all stock engine bay equipment, hoses, and clamps.

• Direct OEM replacement for 2005-2007 Ford F-Series Super Duty trucks
• Constructed with a durable aluminum core and plastic end tanks
• Simple installation with no modifications required
• Compatible with all factory engine bay components
• Manufacturer Part Number: R2886-AT
• Mishimoto Lifetime Warranty

Fits select 2003-2009 Dodge Ram 2500 and 3500 trucks equipped with the 5.9L or 6.7L Cummins Diesel engine.

Restore your cooling system's reliability with the Mishimoto R2711-MT Replacement Plastic Radiator. Over time, factory radiators can develop cracks in the plastic tanks or become clogged with debris, leading to overheating issues in your heavy-duty Ram. This radiator is engineered as a direct-fit solution that maintains compatibility with all stock engine bay equipment, hoses, and shrouds, making it an ideal choice for high-mileage work trucks or daily drivers.

• Direct-fit replacement for the factory radiator
• Engineered to resolve leaks and cooling efficiency loss
• Retains all stock mounting points and equipment compatibility
• Plastic tanks with an aluminum core for durable, lightweight performance
• Manufacturer Part Number: R2711-MT
• Includes the Mishimoto Lifetime Warranty

Fits select 1999-2014 Cadillac Escalade, Chevrolet Silverado, Suburban, and Tahoe, GMC Sierra and Yukon, and Hummer H2.

The Mishimoto R2370-AT Replacement Radiator is a professional-grade solution for cooling systems compromised by age, debris, or fatigue. Designed as a direct-fit component, this radiator restores cooling efficiency without the need for custom fabrication or modification. It is engineered to bolt directly to factory mounting points and retains full compatibility with all original equipment (OE) engine bay components, including hoses, fans, and shrouds. Whether you are addressing a leak or performing preventative maintenance on a high-mileage engine, this unit provides the reliable performance required for daily driving and heavy-duty towing.

• Direct-fit replacement for the factory radiator
• Maintains compatibility with all stock engine bay equipment and mounting points
• Ideal for replacing aged, clogged, or leaking units
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: R2370-AT

Fits 1996-2002 Toyota 4Runner (Base, Limited, and SR5).

Keep your third-generation 4Runner on the road with the Mishimoto R1998-AT Replacement Radiator. Designed as a direct-fit OEM replacement, this unit installs without the need for cutting, bending, or any vehicle modifications. It serves as the ideal solution for aging stock radiators prone to clogged cores, leaking seams, or the inevitable cracking of plastic inlets and outlets caused by years of heat cycling and clamp pressure.

Engineered to maintain stock cooling efficiency, this radiator features high-quality plastic end tanks mated to a durable aluminum core, matching the factory specifications for a seamless fit and reliable performance. Whether you are performing routine maintenance or replacing a failed unit, this radiator ensures your cooling system remains in peak condition.

• Direct-fit replacement for the 1996-2002 Toyota 4Runner
• Compatible with all factory engine bay equipment and mounting points
• OEM-spec plastic end tanks with a high-efficiency aluminum core
• Manufacturer Part Number: R1998-AT
• Mishimoto Lifetime Warranty included

The Mishimoto R1755-AT is a direct-fit replacement radiator designed for the 1995-2004 Toyota Tacoma, providing a reliable solution for aged, clogged, or leaking factory units. Engineered to maintain the efficiency of your cooling system, this radiator ensures your engine stays within safe operating temperatures whether you are commuting or hitting the trails.

Designed for a seamless installation, this replacement radiator functions with all stock engine bay equipment, including factory hoses and mounting points. It is a critical maintenance upgrade for high-mileage Tacomas prone to plastic end tank fatigue or internal scaling that restricts coolant flow.

• Direct-fit for 1995-2004 Toyota Tacoma models
• Compatible with 2.4L, 2.7L, and 3.4L engines
• Maintains factory-style fitment with all stock equipment
• Ideal replacement for leaking or damaged OE radiators
• Manufacturer Part Number: R1755-AT
• Includes Mishimoto Lifetime Warranty

Fits select 2018-2025 Jeep Wrangler and 2020-2025 Jeep Gladiator.

Maintain your vehicle's cooling system integrity with the Mishimoto R13754 replacement radiator. This direct-fit unit is engineered to serve as a drop-in replacement for a factory radiator that has developed leaks, blockages, or degraded plastic end tanks. Because it mirrors the original equipment dimensions, this radiator installs without the need for cutting, bending, or any modifications to the factory engine bay components.

Construction features an aluminum core for reliable heat dissipation and OEM-style plastic end tanks for a secure seal. This radiator is compatible with all stock hoses, fans, and mounting points, making it an ideal choice for a straightforward repair that restores optimal cooling efficiency.

• Direct-fit replacement for select 2018-2025 Jeep Wrangler JL and 2020-2025 Gladiator JT
• Aluminum core with durable plastic end tanks
• Maintains factory cooling system performance and flow
• Compatible with all stock engine bay equipment
• Manufacturer Part Number: R13754
• Backed by the Mishimoto Lifetime Warranty

Fits 2011-2016 Ford F-250 and F-350 Super Duty (6.7L).

The Mishimoto R13230 Primary Replacement Radiator provides a direct-fit solution for 6.7L Powerstroke owners facing cooling system failures. Engineered to meet exact OEM specifications, this primary radiator is designed to replace leaking, clogged, or damaged factory units, restoring the thermal efficiency required for heavy-duty towing and daily driving.

Constructed with high-quality plastic tanks and an efficient core, this radiator serves as a budget-friendly alternative to dealership replacements without sacrificing fitment or performance. It utilizes factory mounting points and hose connections for a seamless, drop-in installation. Each unit is backed by the Mishimoto Lifetime Warranty, ensuring long-term reliability for your Super Duty.

• Direct-fit replacement for the primary radiator system
• Designed to meet or exceed original equipment specifications
• Durable plastic tanks and high-efficiency core construction
• Straightforward installation using factory hardware
• Manufacturer Part Number: R13230
• Mishimoto Lifetime Warranty included

Fits select 2005-2025 Acura, Honda, and Tesla models (including MDX, TLX, Civic Type R, Odyssey, Pilot, Model S, and Model X) with a 5x120mm bolt pattern and 64.1mm center bore.

Mishimoto hub-centric wheel spacers provide an effective solution for creating brake caliper clearance, widening the vehicle's track for improved stability, and correcting wheel offset to eliminate tire rub. These spacers are engineered as a direct extension of the axle hub, ensuring a precise fit that reduces stress on the hardware and maintains a vibration-free ride.

Forged from high-strength 6061-T6 aluminum, these spacers offer an ideal balance of durability and low rotating mass. Each unit features a black anodized finish for superior corrosion resistance and is equipped with pre-installed Grade 12.9 steel studs for maximum safety and security under load.

• Forged 6061-T6 aluminum construction for high strength-to-weight ratio
• Hub-centric design ensures precise alignment and smooth driving
• Grade 12.9 steel studs and lug nuts for secure installation
• Black anodized finish protects against oxidation and environmental wear
• Includes two wheel spacers with pre-installed hardware
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMWS-013-250BK

Fits select 2005-2025 Acura, Honda, and Tesla vehicles with a 5x120mm bolt pattern, M14x1.5 studs, and 64.1mm center bore. These Mishimoto wheel spacers provide the necessary clearance for oversized brake kits, prevent tire rub on suspension components, and widen the vehicle track for improved stability and a more aggressive stance.

Constructed from forged 6061-T6 aluminum, these spacers offer an optimal strength-to-weight ratio for rotating assembly components. The hub-centric design acts as a direct extension of the axle hub, ensuring the wheel remains centered to eliminate vibrations at high speeds and reduce shear load on the hardware. Each spacer features a black anodized finish for superior corrosion resistance and is equipped with Grade 12.9 steel studs and matching lug nuts for a secure, reliable installation.

• Forged 6061-T6 aluminum construction for maximum durability and reduced unsprung weight
• Hub-centric design ensures a precise fit and smooth, vibration-free operation
• Black anodized finish protects against road salts and oxidation
• Grade 12.9 high-strength steel studs and hardware included
• Includes two (2) wheel spacers with pre-installed studs
• Manufacturer Part Number: MMWS-013-200BK
• Limited Lifetime Warranty

Fits 2017-2023 Tesla Model 3 and Model Y (Base, Long Range, Performance, Standard Plus, and Standard Range).

Mishimoto hub-centric wheel spacers provide an effective solution for increasing track width, creating necessary clearance for big brake kits, and correcting wheel offset to prevent tire rub. These 15mm spacers are engineered as a direct extension of the axle hub, ensuring a precise fit that reduces load on the hardware and eliminates steering vibration for a smooth, safe driving experience.

Each spacer is forged from 6061-T6 aluminum, offering an optimal strength-to-weight ratio for demanding automotive applications. The spacers are finished in a black anodized coating for superior corrosion resistance and long-term durability. To ensure a secure installation, the kit includes high-strength Grade 12.9 steel studs and matching lug nuts.

• Construction: Forged 6061-T6 Aluminum
• Finish: Black Anodized
• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Center Bore: 64.1mm
• Thread Pitch: M14x1.5
• Hardware: Grade 12.9 Steel Studs and Lug Nuts
• Kit Includes: Two (2) wheel spacers with pre-installed studs and all necessary hardware
• Warranty: Mishimoto Lifetime Warranty
• MPN: MMWS-012-150BK

Fits select 2010-2026 Buick, Cadillac, and Chevrolet vehicles including Camaro, Corvette, CT5, and Equinox with 5x120 bolt patterns, M14x1.5 studs, and a 67.1mm center bore.

Mishimoto hub-centric wheel spacers are engineered to provide the ideal wheel fitment, whether you are looking to increase track width, prevent tire rub against suspension components, or create the necessary clearance for large aftermarket brake calipers. Unlike generic spacers, these are designed as a direct extension of your vehicle's axle hub, ensuring a hub-centric fit that reduces load on the hardware and eliminates steering vibration at high speeds.

Forged from high-strength 6061-T6 aluminum, these spacers offer an optimal balance of durability and minimal unsprung weight. Each spacer features a black anodized finish for superior corrosion resistance and comes equipped with pre-installed Grade 12.9 steel studs and lug nuts for a secure, reliable installation. This kit includes two wheel spacers and is backed by the Mishimoto Lifetime Warranty.

• Thickness: 20mm
• Bolt Pattern: 5x120
• Center Bore: 67.1mm
• Thread Pitch: M14x1.5
• Hardware: Grade 12.9 Steel Studs and Lug Nuts
• Material: Forged 6061-T6 Aluminum
• Finish: Black Anodized
• Quantity: Pair (2 Spacers)
• MPN: MMWS-010-200BK

Fits select 1990-2023 Subaru, Scion, and Saab models with a 5x100 bolt pattern and 56.1mm center bore, including the BRZ, FR-S, Forester, Impreza, and Legacy.

Mishimoto hub-centric wheel spacers are engineered to improve vehicle stance, increase track width, and provide the necessary clearance for oversized brake calipers or wider tires. By extending the wheel away from the hub, these spacers allow for precise fitment while maintaining a factory-smooth ride. Each spacer is forged from 6061-T6 aluminum for an optimal strength-to-weight ratio, ensuring durability without adding excessive unsprung mass.

These spacers feature a hub-centric design that acts as a direct extension of the axle hub, centering the wheel perfectly to reduce load on the hardware and eliminate vibrations. The kit includes pre-installed grade-12.9 steel studs and matching lug nuts for a secure, high-strength installation. A black anodized finish provides superior corrosion resistance for long-term use in harsh environments.

• Manufacturer Part Number: MMWS-008-200BK
• Thickness: 20mm
• Bolt Pattern: 5x100
• Center Bore: 56.1mm
• Thread Pitch: M12 x 1.25
• Material: Forged 6061-T6 Aluminum
• Hardware: Grade 12.9 Steel Studs
• Finish: Black Anodized
• Quantity: Two (2) Wheel Spacers with Hardware
• Warranty: Mishimoto Lifetime Warranty

Fits select 1990-2023 Subaru, Scion, and Saab vehicles (including BRZ, WRX, Forester, and FR-S) with 5x100 bolt patterns.

Mishimoto hub-centric wheel spacers provide the necessary clearance for oversized brake kits, increased track width for better stability, and the ability to fine-tune wheel offset to prevent tire rub. Engineered for precision, these spacers are forged from 6061-T6 aluminum, offering a high strength-to-weight ratio essential for rotating assembly components. The black anodized finish provides long-lasting protection against corrosion and road debris.

The hub-centric design serves as a direct extension of the vehicle's axle hub, centering the wheel perfectly to ensure a smooth, vibration-free ride while reducing shear load on the mounting hardware. Each kit includes two spacers with pre-installed, high-strength grade-12.9 steel studs and all necessary lug nuts for a secure installation.

• Thickness: 15mm
• Bolt Pattern: 5x100
• Center Bore: 56.1mm
• Thread Pitch: M12 x 1.25
• Material: Forged 6061-T6 Aluminum
• Hardware: Grade-12.9 Steel Studs and Lug Nuts
• Finish: Black Anodized
• Manufacturer Part Number: MMWS-008-150BK
• Warranty: Mishimoto Lifetime Warranty

Fits select 1987-2025 Nissan and Infiniti vehicles, including 300ZX, 350Z, 370Z, Altima, Maxima, Rogue, Sentra, and various Q and QX series models.

Mishimoto hub-centric wheel spacers provide a direct extension of the axle hub to create additional brake clearance, increase track width, and prevent tire rub. These 25mm spacers are engineered for precise wheel fitment, reducing load on the mounting hardware compared to non-hub-centric alternatives to ensure smooth, vibration-free driving.

Each spacer is forged from 6061-T6 aluminum for a high strength-to-weight ratio and finished with a black anodized coating for long-term corrosion resistance. The kit features pre-installed grade-12.9 steel studs and includes all necessary lug nuts for a secure installation.

• Manufacturer Part Number: MMWS-007-250BK
• Thickness: 25mm
• Bolt Pattern: 5x114.3
• Center Bore: 66.1mm
• Thread Pitch: M12
• Material: Forged 6061-T6 Aluminum
• Hardware: Grade 12.9 Steel Studs
• Finish: Black Anodized
• Quantity: Two (2) wheel spacers with hardware
• Warranty: Lifetime Warranty

Fits select 1987-2025 Nissan and Infiniti vehicles including 300ZX, 350Z, 370Z, Altima, G35, G37, Q50, and Rogue (5x114.3 bolt pattern / 66.1mm hub bore).

Mishimoto 20mm wheel spacers provide a hub-centric solution for creating brake clearance, increasing track width, and achieving precise wheel fitment. By extending the axle hub, these spacers ensure a direct surface for the wheel to seat, reducing load on the hardware and preventing the vibrations often associated with lug-centric designs.

• Premium Construction: Forged from 6061-T6 aluminum for an optimal strength-to-weight ratio.
• High-Strength Hardware: Features Grade 12.9 steel studs and lug nuts (M12x1.5) for secure mounting.
• Corrosion Resistance: Finished in black anodizing to protect against the elements and road salt.
• Hub-Centric Design: 66.1mm bore provides a precise fitment for smooth, safe driving.
• Complete Kit: Includes two (2) spacers with pre-installed studs and all necessary hardware.
• MPN: MMWS-007-200BK

These spacers are backed by the Mishimoto Lifetime Warranty, ensuring long-term performance and reliability for street or track applications.