Fits select 2004-2007 Ford F-250/F-350 Super Duty and Excursion models (6.0L / 7.3L).

Glow plug harness failure is a common issue for high-mileage Powerstroke engines. Years of high-amperage draw and extreme engine bay temperatures often degrade the factory plastic connectors, leading to melting, internal shorts, and difficult cold starts. This Mishimoto glow plug harness kit is a complete solution designed to restore reliable ignition performance in cold weather.

Built with robust terminals and superior seals, this harness replaces the brittle OE wiring from the glow plug connectors to the main engine harness. This kit includes everything necessary for a full repair, ensuring a secure, weather-tight connection that exceeds the durability of the original equipment.

• Direct replacement for the factory glow plug wiring harness
• Solves hard cold-start issues caused by melted or shorted connectors
• High-quality construction with durable connectors and robust terminals
• Includes full replacement harness and necessary hardware
• Manufacturer Part Number: MMGH-F2D-04
• Mishimoto Lifetime Warranty

Fits 2004 Ford Excursion, F-250 Super Duty, and F-350 Super Duty (6.0L / 7.3L).

Glow plug harness failure is a frequent issue for high-mileage Powerstroke engines. Years of supporting high-amperage draw in the high-heat environment of the engine bay often cause the factory plastic connectors to melt, resulting in electrical shorts and difficult cold starts. The Mishimoto Glow Plug Harness (MMGH-F2D-03) provides a durable and economical replacement to restore your diesel engine's starting reliability.

This full replacement kit is engineered with high-quality connectors, robust terminals, and superior seals to withstand extreme temperatures and prevent moisture intrusion. Designed to replace the harness from the glow plug connectors to the engine harness connector, this kit includes everything needed to repair melted or faulty wiring and ensure consistent performance in cold weather.

• Full replacement harness from glow plug connectors to the engine harness connector
• Restores electrical integrity for improved cold weather starting performance
• Features robust terminals and high-quality heat-resistant connectors
• Includes superior seals for protection against engine bay contaminants
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMGH-F2D-03

Upgrade your vehicle's fluid plumbing with the Mishimoto -10AN Straight Swivel Hose End Fitting. Engineered for high-performance applications, this fitting replaces aged or unreliable factory lines with a secure, leak-free connection. It is designed specifically for use in plumbing systems for oil, coolant, or fuel where durability under pressure is critical.

Each fitting is manufactured from precision CNC-machined 6061 aluminum with furnace-brazed tubing for maximum structural integrity. The 360-degree swivel end allows for effortless clocking and routing during installation, ensuring you can achieve the perfect angle without binding the hose. To protect against the elements and harsh chemicals, the fitting features a sleek black anodized finish that resists corrosion over the long term.

• CNC-machined 6061 aluminum construction with furnace-brazed ends
• -10AN Straight (0-degree) configuration
• Full 360-degree swivel for simplified routing and installation
• Compatible exclusively with CPE rubber braided lines
• Corrosion-resistant black anodized finish
• Engineered for high-pressure and high-temperature environments
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMFT-SW-10-ST

Mishimoto -AN line fittings provide a professional, leak-free solution for custom fluid plumbing. This 90-degree -10AN swivel hose end is engineered to replace standard rubber lines with a high-pressure, high-temperature alternative capable of withstanding the rigors of performance driving. Whether you are plumbing an oil cooler setup or a turbocharger oil drain, these fittings provide the reliability needed for critical automotive systems.

Constructed from CNC-machined 6061 aluminum with furnace-brazed tubing, these fittings offer superior durability and precision tolerances. The 360-degree swivel design allows for easy clocking and routing during final installation. Each fitting features a sleek, black anodized finish for long-term corrosion resistance in harsh engine bay environments.

• Part Number: MMFT-SW-10-90
• Fitting Size: -10AN
• Angle: 90-Degree
• Material: 6061 Aluminum
• Construction: CNC-Machined and Furnace Brazed
• Finish: Black Anodized
• Swivel: 360-Degree adjustable end
• Compatibility: For use with CPE rubber braided lines only
• Warranty: Mishimoto Lifetime Warranty

Organize your engine bay plumbing with the Mishimoto MMFT-SW-10-45 -10AN 45-degree swivel fitting. Designed for high-performance oil, fuel, and coolant systems, these fittings replace aging or compromised rubber lines with a secure, professional-grade solution.

Each fitting is constructed from precision CNC-machined 6061 aluminum with furnace-brazed tubing for maximum structural integrity. The black anodized finish provides superior corrosion resistance, while the 360-degree swivel design allows for effortless routing and positioning in tight engine bays. These fittings are engineered to withstand extreme temperatures and high-pressure environments, making them ideal for custom oil cooler setups and turbocharger drains.

• Manufacturer Part Number: MMFT-SW-10-45
• Fitting Size: -10AN
• Angle: 45 Degree
• Material: CNC-machined 6061 aluminum
• Finish: Black anodized
• Swivel: Full 360-degree rotation for easy installation
• Compatibility: For use with CPE rubber braided lines only
• Warranty: Signature Mishimoto Lifetime Warranty

The Mishimoto MMFT-NZL-18BK Nozzle Mount Adapter provides a streamlined solution for adding 1/8" NPT ports to your intake or cooling system without the need for welding or metal fabrication. This adapter is specifically engineered for installation on existing rubber or silicone couplers, allowing you to add injection nozzles, sending units, or temperature sensors in minutes.

Precision CNC-machined from 6061 aluminum, the adapter features a durable black anodized finish for long-term corrosion resistance. To ensure a leak-free seal in both liquid and pressurized air systems, Mishimoto includes a high-durability silicone O-ring. Whether you are setting up a water-methanol injection system or adding auxiliary gauges, this fitting provides a professional, secure mounting point.

• Material: CNC-machined 6061 aluminum
• Finish: Black anodized
• Thread Size: 1/8" NPT
• Application: Universal fitment for rubber or silicone couplers
• Seal Type: Durable silicone O-ring included
• Function: Accepts injection nozzles, sending units, and sensors
• Part Number: MMFT-NZL-18BK
• Warranty: Mishimoto Lifetime Warranty

Streamline your CCV or PCV plumbing with these Mishimoto Aluminum Catch Can Fittings (MMFT-M20-58BK). Specifically designed to integrate with the Mishimoto Universal Baffled Parallel Port Catch Can (MMBCC-PPTWO), these adapters convert M20x1.5 threaded ports into 5/8-inch push-on hose barbs for a secure and professional installation.

Precision CNC-machined from 6061 aluminum, these fittings are built to withstand the heat and chemical exposure of an engine bay. The black anodized finish provides superior corrosion resistance and a clean look. To prevent vacuum or oil leaks, the threaded ends come equipped with Viton O-rings, ensuring a reliable seal that outperforms standard rubber alternatives. This kit includes two fittings, making it a complete solution for high-flow ventilation setups.

• Directly compatible with Mishimoto Universal Baffled Parallel Port Catch Can (MMBCC-PPTWO)
• Adapts M20x1.5 threads to 5/8-inch push-on hose barbs
• CNC-machined 6061 aluminum construction
• Durable black anodized finish
• Chemical-resistant Viton O-rings for a leak-free seal
• Includes two (2) fittings per set
• Manufacturer Part Number: MMFT-M20-58BK
• Mishimoto Lifetime Warranty

Streamline your baffled oil catch can installation with this pair of Mishimoto MMFT-M16-38BK adapter fittings. These components are specifically engineered to adapt M16 x 1.5 threaded ports to a standard 3/8-inch push-on hose barb, allowing for precise and secure routing of ventilation lines within the engine bay. CNC-machined from 6061 aluminum, these fittings provide the durability required for high-performance applications while maintaining a lightweight profile.

• Adapts M16 x 1.5 threads to 3/8-inch push-on hose barb
• Precision CNC-machined from high-grade 6061 aluminum
• Black anodized finish for superior corrosion and wear resistance
• Includes Viton O-rings for a reliable, high-temperature, leak-free seal
• Quantity: Pair (2 pieces)
• Manufacturer Part Number: MMFT-M16-38BK
• Includes Mishimoto Lifetime Warranty

These Mishimoto hose barb fittings allow for the precise routing of baffled oil catch can lines by adapting M16 x 1.5 threaded ports to 1/2-inch push-on hoses. Engineered for durability and a leak-free connection, these adapters are essential for custom plumbing in high-performance engine bays.

Each fitting is CNC-machined from 6061 aluminum and features a black anodized finish for superior corrosion resistance and a clean aesthetic. The threaded end utilizes a Viton O-ring to ensure a reliable seal against oil and fuel. This kit includes two fittings and is backed by the Mishimoto Lifetime Warranty.

• Thread Size: M16 x 1.5
• Hose Connection: 1/2" Push-On Barb
• Material: CNC-Machined 6061 Aluminum
• Finish: Black Anodized
• Seal: Viton O-Ring included
• Quantity: Pack of 2
• Manufacturer Part Number: MMFT-M16-12BK

Fits 2011-2025 Dodge Durango and Jeep Grand Cherokee models.

The factory quick-disconnect heater hose fittings on 2011-2025 Dodge and Jeep SUVs are a notorious failure point. Manufactured from brittle plastic, the OE components frequently crack under constant heat cycles and cooling system pressure, leading to sudden coolant loss and potential engine overheating. The Mishimoto MMFT-HH-5858-90 fitting set provides a permanent solution by replacing these weak connections with high-strength, CNC-machined aluminum.

This direct-fit upgrade installs efficiently without requiring the replacement of the entire heater hose assembly or difficult access behind the firewall. These fittings are engineered to withstand pressure spikes during hard acceleration and the intense heat soak associated with extended idling. Each set includes both the supply and return fittings to fully reinforce the vehicle's cooling system reliability.

• Material: CNC-machined aluminum for superior durability compared to factory plastic
• Installation: Direct-fit replacement; does not require firewall access or full hose assembly removal
• Components: Includes both Supply and Return hose fittings
• Fitment: Fits 2011-2025 Dodge Durango and Jeep Grand Cherokee (Multiple trims)
• Part Number: MMFT-HH-5858-90
• Warranty: Mishimoto Lifetime Warranty

The Mishimoto 3/4-inch Aluminum One-Way Check Valve (MMFT-CHKVLV-34) provides essential protection for catch can systems and universal air lines by preventing backflow while maintaining high airflow. Designed to handle the demands of performance engine bays, this valve features a 100 psi maximum pressure rating and a fully serviceable design to ensure long-term reliability.

Constructed with a durable anodized aluminum housing, the valve utilizes high-grade Viton diaphragms and seals for superior chemical resistance against oil and fuel vapors. The flow direction is clearly marked on the exterior to facilitate an accurate and straightforward installation in any 3/4-inch line.

• Prevents backflow and protects vital components from unwanted pressure
• Durable anodized aluminum housing with chemical-resistant Viton seals
• High-flow design with a 100 psi maximum pressure rating
• Fully serviceable components for easy maintenance
• Clear directional markings for error-free installation
• Universal fitment for 3/4-inch air lines
• Manufacturer Part Number: MMFT-CHKVLV-34
• Includes Mishimoto Lifetime Warranty

The Mishimoto MMFT-16ORB-34BK adapter fitting provides a reliable connection from a -16 ORB (O-Ring Boss) threaded port to a 3/4-inch push-on hose barb. This CNC-machined component is ideal for plumbing fluid cooler lines, ensuring precise routing and a secure seal in high-performance cooling systems.

• CNC-machined from 6061 aluminum for durability and weight reduction
• Black anodized finish protects against corrosion and wear
• Includes a high-grade Viton O-ring for a leak-proof seal compatible with various automotive fluids
• Designed specifically for -16 ORB to 3/4-inch push-on hose applications
• Mishimoto Lifetime Warranty

Part Number: MMFT-16ORB-34BK

This Mishimoto adapter fitting allows for precise routing of fluid cooler lines by converting a -16 ORB (O-Ring Boss) threaded port to a 1-inch push-on hose barb connection. Designed for high-performance automotive cooling and fluid systems, it ensures a secure, leak-free transition for custom plumbing needs.

• CNC-machined from 6061 aluminum for maximum durability and weight savings
• Durable black anodized finish provides superior corrosion resistance
• Includes a high-quality Viton O-ring to ensure a reliable seal under high temperatures
• Specifically designed to adapt -16ORB threads to a 1-inch push-on barb
• Mishimoto Lifetime Warranty protects against manufacturing defects
• Manufacturer Part Number: MMFT-16ORB-1BK

This Mishimoto adapter fitting is engineered to provide a secure transition from a -16ORB (O-Ring Boss) threaded port to a 1-1/4-inch push-on hose barb. It is designed for automotive fluid systems where precise routing and leak-free reliability are critical, such as custom cooling or oil lubrication setups.

CNC-machined from high-strength 6061 aluminum, this fitting features a black anodized finish for long-term durability and corrosion resistance. To ensure a consistent seal even under high temperatures and fluid pressures, the threaded end is equipped with a Viton O-ring, which offers superior chemical resistance compared to standard seals.

• Adapts -16ORB thread to 1-1/4-in push-on hose barb
• CNC-machined from 6061 aluminum for precise tolerances
• Durable black anodized finish
• Includes high-temp Viton O-ring for a reliable seal
• Ideal for custom routing of fluid cooler lines
• Manufacturer Part Number: MMFT-16ORB-114BK
• Mishimoto Lifetime Warranty

Precision-engineered for custom fluid cooler setups and high-performance engine builds, the Mishimoto -10 ORB to -10AN adapter fitting ensures a leak-free connection for your oil, fuel, or coolant lines. This fitting is CNC-machined from 6061-T6 aircraft-grade aluminum to exact specifications, providing a secure transition between -10 O-Ring Boss (ORB) ports and standard -10AN plumbing.

To maintain long-term reliability under heat and pressure, the -10 ORB side is equipped with a high-grade Viton O-ring, offering superior resistance to chemical degradation. The black anodized finish adds a layer of corrosion protection while maintaining a professional appearance in the engine bay. This adapter is a direct component for Mishimoto universal tube-and-fin crossflow oil coolers and other high-flow fluid systems.

• Adapts -10 ORB thread to -10AN male flare
• CNC-machined from 6061 aircraft-grade aluminum
• Durable black anodized finish
• Includes high-temp Viton O-ring for a positive seal
• Engineered for use in custom oil, fuel, and coolant systems
• Manufacturer Part Number: MMFT-10-10BK
• Mishimoto Lifetime Warranty

Upgrade the cooling capacity of your 1987-2001 Jeep Cherokee XJ (4.0L) with the Mishimoto Performance Aluminum Fan Shroud. This system eliminates the archaic, power-robbing mechanical fan that relies on engine RPM for airflow. By replacing the engine-driven fan with three high-flow 10-inch electric slim fans, you ensure a constant 950 CFM of airflow per fan (2,850 total CFM) regardless of engine speed—critical for low-speed rock crawling and trail idling where airflow is typically limited.

The lightweight aluminum shroud is a direct-fit for the 1987-2001 XJ and covers significantly more surface area than the factory shroud. In testing, this setup delivered a 41.9% increase in airflow at idle and a 22% increase at 2,500 RPM compared to the stock configuration. The included adjustable fan controller allows you to set activation temperatures between 150°F and 240°F, while the included AC fan jumper harness maintains factory AC function on 1997-2001 models. This kit is compatible with both OEM and Mishimoto radiators.

• Fits 1987-2001 Jeep Cherokee XJ (4.0L)
• Includes three Mishimoto high-flow 10-inch slim fans (950 CFM each)
• Includes adjustable fan controller (150°F to 240°F) and 1997-2001 AC jumper harness
• Constructed from lightweight, durable aluminum
• Increases idle airflow by 41.9% and reduces parasitic engine drag
• Manufacturer Part Number: MMFS-XJ-89K

Protect your flat-four from overheating and potential engine failure with the Mishimoto direct-fit aluminum fan shroud kit. Specifically engineered for the 2002-2007 Subaru WRX/STI and 2005-2006 Saab 9-2X Aero, this kit replaces the bulky, less efficient factory shroud with a streamlined, high-performance cooling solution.

Constructed from lightweight, aircraft-quality TIG-welded aluminum, this shroud features a durable black powder-coated finish. It comes equipped with two high-flow 12-inch electric fans, significantly increasing airflow to reduce engine-bay heat and coolant temperatures. The kit is designed for a true plug-and-play installation, featuring pre-wired factory pigtails that eliminate the need for cutting or splicing your vehicle's harness. Additionally, the shroud includes integrated mounting points for the factory overflow bottle to maintain a clean, OEM-style engine bay.

• Fits both stock and Mishimoto radiators
• Dual 12-inch high-flow fans for improved cooling efficiency
• TIG-welded aircraft-quality aluminum construction
• Direct plug-and-play connection with factory pigtail connectors
• Includes provisions for factory overflow bottle mounting
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMFS-WRX-01PBK

Fits select 2002-2007 Subaru Impreza WRX, WRX STI, and 2005-2006 Saab 9-2X Aero models.

Protect your engine from the risks of overheating with the Mishimoto Performance Aluminum Fan Shroud Kit. Designed as a direct-fit upgrade, this kit replaces heavy, less efficient factory fan shrouds with a lightweight aircraft-quality aluminum unit. It features dual high-flow 12-inch fans that significantly improve heat dissipation and reduce coolant temperatures, ensuring your flat-four stays cool under demanding driving conditions.

Installation is straightforward and requires no wire splicing. The kit includes pre-wired factory pigtails for a true plug-and-play connection to your body harness. For added convenience, the shroud features integrated mounting points for the factory overflow bottle and is compatible with both OEM and Mishimoto performance radiators.

• Constructed from TIG-welded aircraft-quality aluminum with a brushed finish
• Includes two high-flow 12-inch fans for maximum cooling efficiency
• Plug-and-play wiring with factory pigtail connectors
• Direct-fit design compatible with stock and Mishimoto radiators
• Retains factory overflow bottle mounting points
• Manufacturer Part Number: MMFS-WRX-01P
• Mishimoto Lifetime Warranty

Fits 1987-2006 Jeep Wrangler YJ and TJ models (Base, Sport, Sahara, Rubicon, SE, Unlimited, and others) with 2.5L, 4.0L, and 2.4L engines.

The Mishimoto MMFS-WRA-87 Performance Fan Shroud Kit is engineered to significantly improve engine cooling by replacing the inefficient factory mechanical fan. This kit features a lightweight, vehicle-specific aluminum shroud that ensures airflow is pulled through the entire core of the radiator rather than just the area directly behind the fan blades. By converting to an electric setup, you reduce parasitic drag on the engine, potentially freeing up horsepower and improving throttle response.

This kit includes a 16-inch high-flow electric fan capable of delivering over 1850 CFM of airflow, providing consistent cooling even at low speeds or during technical trail idling. The shroud is designed for a direct-fit installation and is compatible with both factory radiators and Mishimoto performance aluminum radiators.

• Includes 16-inch high-flow electric fan providing 1850+ CFM
• Lightweight aluminum shroud increases airflow efficiency across the radiator core
• Direct-fit for 1987-2006 Jeep Wrangler YJ and TJ models
• Compatible with OEM and Mishimoto performance radiators
• Manufacturer Part Number: MMFS-WRA-87

Fits 1993-1998 Toyota Supra Base and Twin Turbo models.

The Mishimoto MMFS-SUP-93T Aluminum Fan Shroud Kit is a direct-fit cooling upgrade engineered to improve heat dissipation and airflow for the A80 chassis. This kit replaces the heavy, bulky factory plastic shroud with a precision-fabricated aluminum unit designed to draw air more efficiently across the entire surface of the radiator core. By housing two high-flow 12-inch electric fans, this shroud ensures consistent cooling performance during track use or heavy idling. It is designed to work seamlessly with both the factory Toyota radiator and the Mishimoto performance aluminum radiator.

• Direct-fit for 1993-1998 Toyota Supra Base and Twin Turbo
• Includes two 12-inch electric fans and all necessary mounting hardware
• Lightweight aluminum construction reduces front-end weight compared to OEM
• Maximizes airflow through the radiator for improved cooling efficiency
• Compatible with both stock and Mishimoto radiators
• Manufacturer Part Number: MMFS-SUP-93T

Fits 1986-1992 Toyota Supra (Base and Turbo).

The Mishimoto Aluminum Fan Shroud Kit is engineered to improve engine cooling efficiency and heat dissipation for the A70 platform. By ducting air directly through the radiator core rather than allowing it to bypass the cooling fins, this shroud ensures maximum thermal management during high-performance driving or in extreme ambient temperatures. Constructed from lightweight aluminum, this shroud is significantly more durable and lighter than the factory equipment.

This kit comes equipped with two high-flow 12-inch electric fans that provide consistent airflow, even at low speeds or idle. It is designed for a precise fit with both the stock radiator and the Mishimoto Toyota Supra performance aluminum radiator, securing the fan blades safely to prevent damage to other engine components.

• Direct fit for 1986-1992 Toyota Supra
• Lightweight aluminum shroud construction improves heat dissipation
• Includes (2) 12-inch electric fans for maximum airflow
• Compatible with both OEM and Mishimoto radiators
• Complete with all necessary mounting hardware
• Manufacturer Part Number: MMFS-SUP-86

Fits select 2008-2015 Subaru Impreza, WRX, and WRX STI models.

The Mishimoto Plug-N-Play Aluminum Fan Shroud Kit is engineered to significantly improve cooling efficiency while reclaiming valuable engine bay space. This shroud bolts directly to factory or Mishimoto performance radiators and maintains compatibility with the OEM coolant overflow tank. With a slim 3.5-inch maximum depth, this setup provides additional clearance for front-end components and forced induction piping.

Installation is truly plug-and-play. The brushed black aluminum shroud comes preassembled with two 12-inch high-flow fans prewired with factory-style connectors. This eliminates the need for splicing, soldering, or crimping, allowing for a clean installation that mimics the factory shroud mounting points. Each high-flow fan provides over 1150 CFM of airflow to effectively manage engine temperatures under demanding conditions.

• Direct fit for 2008-2015 Subaru Impreza, WRX, and WRX STI
• Includes two 12-inch high-flow slim fans
• Airflow Rating: Over 1150 CFM per fan
• Maximum Depth: 3.5 inches
• Construction: Durable brushed aluminum
• Finish: Black
• Wiring: Prewired with OE-style connectors
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMFS-STI-08PBK

Fits select 2008-2015 Subaru Impreza, WRX, and WRX STI models.

The Mishimoto Plug-N-Play Aluminum Fan Shroud Kit (MMFS-STI-08P) is engineered to improve cooling efficiency while maximizing engine bay clearance. This kit features a slim 3.5-inch profile, providing significantly more room than the bulky stock setup. The shroud is constructed from durable brushed aluminum and comes preassembled with two 12-inch high-flow slim fans.

Installation is a direct bolt-on process that requires zero splicing, soldering, or crimping. The fans are prewired with factory-style connectors for a true plug-and-play experience. This kit fits both OEM and Mishimoto performance radiators and is fully compatible with the stock coolant overflow tank.

• Direct fit for 2008-2015 Subaru Impreza, WRX, and WRX STI
• Includes two 12-inch high-flow slim fans
• Delivers over 1,150 CFM of airflow per fan
• Slim 3.5-inch maximum depth increases engine bay space
• Lightweight brushed aluminum shroud construction
• Prewired with factory-style connectors for plug-and-play installation
• Bolts to factory or Mishimoto performance radiators
• Retains use of the OEM coolant overflow tank
• Includes all necessary mounting hardware
• Manufacturer Part Number: MMFS-STI-08P

Fits 2002-2006 Nissan Sentra SE-R and SE-R Spec V.

The Mishimoto Performance Aluminum Fan Shroud Kit is engineered to significantly improve engine cooling efficiency by maximizing airflow across the radiator core. This kit replaces bulky, heavy factory plastic shrouds with a lightweight aluminum unit that effectively drives out excess heat, helping to maintain optimal operating temperatures during spirited driving or in high-ambient heat conditions.

This shroud serves as a secure mounting point for the cooling fans, protecting blades and other engine components from damage. It is designed for a direct-fit installation and is compatible with both the factory radiator and the Mishimoto performance aluminum radiator.

• Direct fit for 2002-2006 Nissan Sentra SE-R and Spec V
• Constructed from high-quality, lightweight aluminum
• Compatible with OEM and Mishimoto radiators
• Includes two 12-inch cooling fans and all necessary mounting hardware
• Manufacturer Part Number: MMFS-SEN-00

Fits 2000-2009 Honda S2000 (Base and CR models).

The Mishimoto aluminum fan shroud kit (MPN: MMFS-S2K-00) is engineered to maximize engine cooling efficiency by effectively drawing heat out of the engine bay and directing airflow across the radiator. Built from high-quality aluminum, this shroud is significantly lighter than the bulky plastic factory assembly, reducing front-end weight while enhancing performance.

This kit features a direct plug-and-play design, utilizing factory plugs for a seamless electrical connection without the need for splicing. The shroud is designed for versatility, mounting perfectly to either the stock radiator or a Mishimoto performance aluminum radiator. Beyond cooling, it serves the critical role of securely housing the fan blades to prevent damage to surrounding engine components.

• Direct fit for 2000-2009 Honda S2000
• Lightweight aluminum construction outperforms factory plastic shrouds
• Plug-and-play installation with included factory-style plugs
• Compatible with both OEM and Mishimoto radiators
• Manufacturer Part Number: MMFS-S2K-00

Fits 1995-1998 Nissan 240SX (Base, LE, and SE models) equipped with SR20DET engines, as well as S15 models.

The Mishimoto Aluminum Fan Shroud Kit is engineered to significantly improve engine cooling efficiency and heat dissipation for your S14. This kit effectively draws heat out of the engine bay while delivering a high volume of cool air directly through the radiator. Constructed from high-grade aluminum, the shroud is considerably lighter than factory units and serves as a direct OEM fit, bolting to existing mounting points without modification.

Beyond temperature management, this shroud provides a secure mounting platform for the fan blades, preventing vibration and ensuring they remain clear of other critical engine components. It is compatible with both the stock radiator and the Mishimoto Nissan 240SX S14 SR20 performance radiator.

• Direct fit for 1995-1998 Nissan 240SX (S14/S15) with SR20DET
• Lightweight aluminum construction for improved durability and weight savings
• Includes two 12-inch electric fans to maximize airflow
• Designed for a seamless installation with included mounting hardware
• Manufacturer Part Number: MMFS-S14-95SR

Fits 1989-1994 Nissan 240SX (Base, LE, SE, XE) with SR20-style radiators.

The Mishimoto Nissan 240SX S13 aluminum fan shroud kit is designed as a direct-fit upgrade to improve cooling efficiency and protect your engine. This kit delivers a high volume of airflow directly through the radiator core, effectively managing coolant temperatures during aggressive driving or track use. Constructed from high-grade aluminum, this shroud is significantly more durable and lighter than the factory plastic shroud.

The kit comes complete with two 12-inch high-flow electric fans and all necessary mounting hardware for a straightforward installation. It is designed to fit both stock and Mishimoto Nissan 240SX S13 SR20 radiators while safely securing the fan blades to prevent damage to sensitive engine components.

• Direct fit for the 1989-1994 Nissan 240SX (S13)
• Lightweight aluminum construction for increased durability over OE plastic
• Includes two high-flow 12-inch electric fans
• Optimized to maximize airflow across the entire radiator surface
• Compatible with stock and Mishimoto SR20 radiators
• Includes all required mounting hardware
• Manufacturer Part Number: MMFS-S13-89SR

Fits 2004-2008 Mazda RX-8 models across all trims including Base, Shinka, Sport, and Grand Touring.

The Mishimoto Aluminum Fan Shroud Kit is designed to significantly improve engine cooling efficiency and heat dissipation for your rotary-powered vehicle. This kit replaces the bulky factory shroud with a lightweight, brushed aluminum unit that provides a direct-fit installation on both OEM and Mishimoto performance radiators. By utilizing a shroud rather than open-mounted fans, airflow is effectively pulled through the entire radiator core, maximizing cooling capacity during high-stress driving conditions.

This kit includes two 12-inch high-flow slim fans that deliver over 1,100 CFM each, providing a substantial increase in airflow over stock components. Beyond cooling performance, the shroud serves as a secure mounting point for the fan blades, protecting essential engine components from damage. The slim-line design also helps clear up valuable space in the cramped RX-8 engine bay.

• Direct fit for 2004-2008 Mazda RX-8
• Includes two 12-inch slim electric fans
• Airflow: 1,100+ CFM per fan
• Construction: Lightweight brushed aluminum
• Compatible with stock and Mishimoto radiators
• Includes all necessary mounting hardware
• Manufacturer Part Number: MMFS-RX8-04

Fits 1993-1995 Mazda RX-7 Base, R1, R2, and Touring models with LS engine swaps (4.8L, 5.3L, 5.7L, 6.0L, 6.2L, 7.0L).

Managing temperatures is critical when dropping a V8 into the FD-chassis. The Mishimoto Aluminum Fan Shroud Kit is engineered to maximize airflow across the entire radiator core, significantly improving cooling efficiency over open-fan setups. This kit is designed for a direct fit and is compatible with both the factory radiator and the Mishimoto performance radiator tailored for LS-swapped RX-7s.

• Includes two high-flow 12-inch electric fans
• Lightweight aluminum shroud construction for superior heat dissipation
• Maximizes airflow by drawing air through the entire core surface
• Includes all necessary mounting hardware for installation
• Manufacturer Part Number: MMFS-RX-LS

Fits 2002-2006 Acura RSX Base and Type-S models. This Mishimoto aluminum fan shroud kit is engineered to significantly improve engine cooling efficiency by directing airflow more effectively through the radiator core. By eliminating air bypass and maximizing the cooling surface area, this shroud helps maintain stable operating temperatures during high-demand driving or in high-ambient heat conditions.

Constructed from lightweight aluminum, this shroud is more durable and considerably lighter than standard plastic OE shrouds. The design also provides a secure mounting point for fan blades, protecting essential engine components from potential damage. The kit features a direct plug-and-play design with factory-style plugs for a seamless installation process on both stock and Mishimoto radiators.

• Direct fit for 2002-2006 Acura RSX
• Lightweight aluminum construction with a black finish
• Increases cooling efficiency and heat dissipation
• Compatible with OEM and Mishimoto performance radiators
• Includes factory plugs for a true plug-and-play install
• Manufacturer Part Number: MMFS-RSX-02BK