Fits 1968-1982 Jeep CJ5, CJ6, CJ7, and CJ8 Scrambler models equipped with a 3-wire wiper motor.

This Omix windshield wiper switch is a direct-fit restoration component designed to replace a worn or non-functional factory switch. Precision-engineered to original equipment specifications, it ensures reliable control over your wiper system's speeds and parking function. This unit is specifically built for Jeeps utilizing the 3-wire motor configuration common in the CJ series through the early 1980s.

• Direct Fit: Engineered for an OE-style fit and function to simplify installation.
• Motor Compatibility: Designed specifically for 3-wire wiper motor systems.
• Interchange: Replaces factory part number 5460089.
• Hardware Note: Designed for use with wiper switch mounting nut 17234.11 (sold separately).
• Build Quality: Backed by a Limited 5-Year Warranty.
• Manufacturer Part Number: 19106.01

Fits select 1968-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models. This Omix windshield wiper rod clip is a direct replacement for worn or brittle factory clips that secure the wiper linkage rods, ensuring smooth and synchronized wiper arm operation.

Precision-engineered to meet OE standards, this clip provides a secure snap-fit to the wiper rod, preventing the linkage from detaching during heavy rain or snow. It is designed for a straightforward installation as a direct-fit component, replacing OE part number 957868. Please note that these clips are sold individually; two are typically required to service the entire wiper assembly on these vehicles.

• Direct OE-style replacement for factory wiper linkage clips
• Restores proper attachment between the wiper motor and linkage rods
• Durable construction to withstand temperature fluctuations and mechanical wear
• Replaces OE: 957868
• Manufacturer Part Number: 19105.08
• Sold individually (2 required per vehicle)
• Limited 5-year warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore smooth and reliable windshield wiper operation with this direct-fit Omix wiper motor link. Designed as an OE-style replacement, this linkage arm connects the wiper motor to the pivot assembly, ensuring the consistent mechanical synchronization needed for clear visibility in all weather conditions. Over time, factory links can become bent or the bushings can wear, leading to sloppy wiper movement or complete failure; this component provides a precise, bolt-in solution to restore original performance.

• Overall Length: 10.125 inches
• Direct-fit OE-style replacement
• Replaces OE Part Number: 5453960
• Manufacturer Part Number: 19105.07
• Compatible with complete wiper linkage kit 19105.05
• Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler CJ8 models.

Restore the functionality of your windshield wiper system with this direct-fit wiper pivot and short arm from Omix. Specifically designed for the driver side, this component provides a reliable connection between the wiper motor linkage and the wiper arm, ensuring consistent visibility during adverse weather. Built to meet or exceed original equipment standards, this OE-style replacement addresses common issues with stripped or seized pivots on classic CJ models.

• Position: Driver Side (Left)
• Design: Wiper Pivot with Short Arm
• Fitment Type: Direct Replacement
• Replaces OE Number: 5453957
• Manufacturer Part Number: 19105.06
• Limited 5-Year Warranty

Note: For the long passenger side wiper pivot, use Omix part number 19105.04.

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

This Omix windshield wiper pivot and arm assembly is a direct OE-style replacement designed specifically for the passenger (right) side of your classic Jeep. Over time, original pivot points can seize or develop excessive play, leading to poor wiper contact and reduced visibility during inclement weather. This assembly features a 25-inch arm and is engineered to factory specifications for a seamless installation into the factory mounting points.

• Direct fit for passenger side (right) applications
• Overall arm length: 25 inches
• OE Style construction maintains factory appearance and function
• Replaces original equipment part number: 5453958
• Manufacturer Part Number: 19105.04
• Limited 5-year warranty

Note: For the shorter driver side (left) pivot, use Omix part number 19105.06.

Fits 1968-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models.

Keep your cabin dry and protect your wiper assembly with this Omix Windshield Wiper Pivot Gasket. Over time, original rubber gaskets become brittle, cracked, or compressed, allowing water to leak behind the dash and into the cowl area. This direct-fit replacement restores the factory seal between the wiper pivot and the body or windshield frame, preventing moisture intrusion and potential corrosion.

• Direct OE replacement for a precise fit
• Replaces original equipment part number: 973658
• Maintains factory-style appearance and sealing performance
• Engineered for 1968-1986 Jeep CJ-series vehicles
• Manufacturer Part Number: 19105.03
• Pairs with wiper pivot nut: 19105.01 (sold separately)
• Backed by a Limited 5-Year Warranty

Fits 1968-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models. This Omix windshield wiper pivot nut is a direct-fit replacement designed to secure the wiper arm linkage at the cowl. Over time, original hardware can become corroded or stripped, leading to sloppy wiper movement or failure during use. This replacement ensures a tight, factory-style fit to restore proper wiper system operation.

• Direct OE-style replacement for a precise fit and easy installation
• Constructed to original dimensions for reliable clamping force
• Thread Size: 5/8-18
• Head Style: 3/4-inch hex
• Replaces original equipment part number: 4005372
• Manufacturer Part Number: 19105.01
• Backed by a Limited 5-Year Warranty

Sold individually. This nut installs at the pivot point where the wiper shaft protrudes from the body, ensuring the linkage remains properly aligned and anchored.

Fits select 1941-1967 Jeep and Willys models, including MB, CJ-2, CJ-3, CJ-5, Wagoneer, and Gladiator, equipped with electric wiper motor conversions. This Omix replacement windshield wiper kit is engineered specifically for classic vehicles that have been upgraded from vacuum-operated to electric wiper systems. Constructed from durable stainless steel with a polished chrome finish, this kit offers a long-lasting solution to restore visibility and OE style to your vintage rig.

• Replacement kit for vehicles with upgraded electric wiper conversions
• Includes one (1) stainless steel wiper arm and one (1) wiper blade
• Polished chrome finish for corrosion resistance and classic aesthetics
• Direct-fit OE style mounting for simplified installation
• Manufacturer Part Number: 19102.01 (Ref: WSHA-1K)
• Limited 5-year manufacturer warranty

Fits select 1987-2002 Jeep Wrangler YJ and TJ models equipped with TF6, 30RH, or 32RH automatic transmissions.

Restore the shift quality and reliability of your Jeep’s drivetrain with this comprehensive automatic transmission rebuild kit from Omix. Engineered to meet or exceed OE specifications, this kit provides all the essential internal components needed for a complete transmission overhaul, helping to eliminate slipping and firm up gear engagements. It serves as a direct-fit replacement for factory part number AT-TF6-SK.

• Complete overhaul solution for TF6, 30RH, and 32RH automatic transmissions
• Includes friction discs, steel discs, and a front kick-down band
• Comprehensive seal and gasket set with O-rings for leak-free performance
• New filter, snap rings, bushings, and washers included
• Manufacturer Part Number: 19001.04
• Backed by a Limited 5-Year Warranty

Fits 1987-1995 Jeep Wrangler YJ models (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport) equipped with a 5-speed manual transmission.

Restore your Jeep's interior and seal out the elements with this Omix outer manual shifter boot. Over time, factory rubber boots can crack or tear, allowing heat, noise, and moisture to enter the cabin. This direct-fit replacement is engineered to meet or exceed OE standards, providing a reliable seal at the floor tunnel for a clean, factory-correct appearance and performance. As a precise OE-style component, it installs directly to the factory mounting points without modification.

• Direct replacement for OE part number 53004539
• Durable rubber construction designed for long-term flexibility
• Fits 5-speed manual transmission applications
• Manufacturer Part Number: 18886.97
• Backed by a limited 5-year warranty

Fits 1997-2004 Jeep Wrangler (Rubicon, Sahara, SE, Sport, X) equipped with manual transmissions.

Replace a cracked or weathered gear selector seal with this Omix outer shift boot. Over time, factory rubber boots can dry out and tear, allowing road noise, excessive heat, and moisture to enter the cabin through the shifter assembly. This direct replacement is molded from durable, flexible rubber to ensure a factory-style fit and reliable performance on the trail or the highway.

• Direct replacement for OE part number 52078558
• Flexible rubber construction resists cracking and environmental wear
• Designed specifically for manual transmission models
• Manufacturer Part Number: 18886.96
• Limited 5-year warranty

Fits select 1984-1997 Jeep Cherokee and Wrangler models equipped with manual transmissions.

Restore the interior of your Jeep with this Omix manual transmission floor shifter bezel. Designed as a direct-fit replacement for worn, cracked, or missing factory trim, this bezel maintains the original equipment (OE) style and finish of your center console. It is manufactured from durable black plastic to withstand the rigors of off-road use and daily shifting while resisting fading and cracking over time.

• Direct-fit replacement ensures easy installation on factory consoles
• Molded from high-quality black plastic for long-term durability
• Matches original interior aesthetics and texture
• Designed specifically for manual transmission applications
• Replaces original equipment part number: 53000056
• Manufacturer Part Number: 18886.94
• Limited 5-year warranty

Fits select 1984-1999 Jeep Cherokee and Wrangler models equipped with AX4, AX5, or AX15 manual transmissions.

Restore the crisp, positive feel of your manual gearbox with this Omix replacement shifter bushing. Over years of use, the original rubber bushing at the base of the shifter lever can degrade or disintegrate, resulting in excessive play and sloppy gear engagement. This direct-fit component is engineered to OE specifications to ensure proper pivot geometry and vibration damping within the shifter assembly.

• Transmission Compatibility: AX4, AX5, and AX15 manual units
• Location: Mounts at the base of the shifter lever
• Material: Durable black rubber construction
• OE Reference: Replaces factory part 83500519
• MPN: 18886.86
• Warranty: Limited 5-year manufacturer warranty

Note: For a complete service on AX4 or AX5 transmissions, the shifter retainer gasket is available separately under part number 18886.87.

Fits 1982-1986 Jeep CJ5 and CJ7.

The Omix Shift Lever Clip is a direct-fit replacement designed to restore the integrity of your vehicle's shift linkage. Built to meet or exceed factory standards, this clip is essential for securing the transmission shift lever, particularly on models equipped with T4 or T5 manual transmissions. It serves as a precise replacement for worn, lost, or corroded hardware, ensuring the shift lever remains properly seated during operation.

• Direct OE-style replacement ensures proper fitment and function
• Specified for 1982-1986 Jeep CJ models with T4 and T5 manual transmissions
• Replaces original equipment part number 3241239
• Manufacturer Part Number: 18885.32
• Backed by a limited 5-year manufacturer warranty

Fits 1982-1983 Jeep CJ5 and 1982-1986 Jeep CJ7 models. This Omix T4 transmission shifter boot is a direct OE replacement designed to restore the seal and appearance of your classic Jeep's interior. Over years of use, factory rubber boots often degrade, crack, or tear, allowing road noise, heat, and moisture to enter the cabin. Built to original equipment specifications, this boot provides a precise fit and durable performance for your T4 manual shifter assembly.

• Direct OE style replacement for a factory-correct fit
• Constructed from high-quality black rubber for flexibility and longevity
• Engineered specifically for T4 manual transmissions
• Protects the cabin from heat, dust, and drafts
• Manufacturer Part Number: 18885.30
• Backed by a limited 5-year manufacturer warranty

Fits select 1971-1975 Jeep Cherokee, CJ5, CJ6, J10, and Wagoneer models equipped with the T14 manual transmission.

Restore the integrity of your transmission tunnel with this Omix shifter boot retaining ring. Designed as a direct OE-style replacement for rusted, bent, or missing factory hardware, this steel ring provides the necessary clamping force to keep your shifter boot securely sealed against the floor pan. Maintaining a proper seal is essential for reducing road noise, heat, and moisture entry into the cabin.

• Direct fit replacement for OE part number 948146
• Manufactured from durable steel with a round profile
• Dimensions: 5 inches wide by 6-1/8 inches long
• Engineered specifically for T14 manual transmission applications
• Recommended for use with shifter boot 18806.02
• Manufacturer Part Number: 18881.19
• Limited 5-year manufacturer warranty

Fits select 1946-1983 Jeep Cherokee, CJ-series, Wagoneer, J-series, and Willys models with T90, T14, or T15 manual transmissions.

This Omix manual transmission shift knob is a direct OE-style replacement designed to restore the factory appearance and tactile feel of your Jeep's interior. Manufactured to meet or exceed original equipment standards, this black plastic knob is engineered for models equipped with T90, T14, and T15 manual gearboxes that require a threaded attachment. The 5/16 x 24 thread pitch ensures a precise fit on the factory shifter lever, providing a secure grip for reliable gear changes.

• Direct Fit: Designed as an OE-style replacement for a seamless installation.
• Durable Construction: Molded from high-quality black plastic for long-term wear resistance.
• Precise Specifications: Features a 5/16 x 24 thread pitch to match factory shift levers.
• Technical Support: Replaces OE part number 929393.
• Warranty Protection: Backed by the Omix limited 5-year manufacturer warranty.

Specifications:
Material: Plastic
Color: Black
Thread Pitch: 5/16 x 24
Manufacturer Part Number: 18807.01

This Omix upper transmission shifter boot is a direct-fit replacement for 1981-1986 Jeep CJ5 and CJ7 models equipped with Warner T4 or T5 manual transmissions. Designed to restore cabin sealing and interior aesthetics, this boot prevents road grime, moisture, and excess heat from entering the vehicle through the shifter opening.

• Direct-fit replacement for OE part number: 5752010
• Fits Warner T4 and T5 4-speed and 5-speed manual gearboxes
• Constructed from high-quality black rubber for long-lasting flexibility
• Position: Upper transmission shifter boot
• Manufacturer Part Number: 18806.03
• Warranty: Limited 5-year manufacturer warranty

Maintenance Tip: If you are replacing a torn or dry-rotted upper boot, inspect your lower boot for wear as well. For the corresponding lower shifter boot, use Omix part number 18885.30.

Fits 1975-1979 Jeep CJ5, CJ6, CJ7, J10, J20, Cherokee, and Wagoneer models equipped with T14, T15, or T150 3-speed manual transmissions.

This Omix replacement transmission shifter boot is engineered to restore the factory seal between your cabin and the drivetrain. Over time, original rubber boots dry rot or tear, allowing heat, moisture, and road noise to enter the interior. Designed to meet or exceed OE quality standards, this direct-fit boot ensures a precise fit and smooth shifter movement for classic Jeep 3-speed applications.

• Direct OE-style replacement for factory-correct fitment
• Molded from durable black rubber for long-term flexibility and weather resistance
• Maintains the original interior appearance and keeps out road debris
• Compatible with shifter boot retainer 18881.19

• Brand: Omix
• Manufacturer Part Number: 18806.02
• Replaces OE Number: 948185
• Dimensions: 5-inch x 6-inch oval
• Bore Diameter: 0.60-inch shifter hole
• Warranty: Limited 5-Year Warranty

Fits select 1987-2006 Jeep Wrangler, Cherokee, and Grand Cherokee models equipped with NP231 or NP241 transfer cases.

Restore your drivetrain's reliability with this Omix replacement transfer case chain. Over time, factory chains stretch, leading to slippage and internal housing noise under load. This heavy-duty chain is engineered to meet or exceed factory specifications, ensuring smooth power transfer and a precise fit within the NP231 and NP241 units commonly found in YJ, TJ, XJ, ZJ, and WJ platforms.

• Direct replacement for OE part number 83503146
• Precision-engineered 31-link construction
• Standard 1-inch width for factory-spec engagement
• Durable steel design built for off-road and daily use
• Manufacturer Part Number: 18612.01

Fits select 1972-1986 Jeep CJ5, CJ6, CJ7, Scrambler (CJ8), Cherokee, Wagoneer, and J-Series trucks.

This Omix OE-style replacement transfer case mount is engineered to restore drivetrain stability and dampen vibrations that can lead to premature component wear. Over decades of service, factory rubber mounts often degrade due to heat and oil saturation, resulting in excessive transfer case movement and driveline misalignment. This direct-fit component features a durable rubber isolator bonded to high-strength steel to ensure a reliable repair that meets or exceeds factory performance standards.

• Direct replacement for a precise fit and straightforward installation
• Constructed from high-quality rubber and steel for long-lasting vibration damping
• Upper mounting holes: 4.0-inch center-to-center
• Lower mounting holes: 1.5-inch center-to-center
• Replaces OE Part Number: 1370910
• Omix Part Number: 18608.02

Fits 1980-1986 Jeep CJ5, CJ7, and Scrambler models equipped with the Dana 300 transfer case.

This Omix shift knob kit is a direct OE-style replacement designed to restore the look and feel of your Jeep's drivetrain controls. Over years of use, factory knobs can crack or the shift pattern can become illegible; this kit provides a complete solution to refresh your interior. Each component is manufactured to meet or exceed original equipment standards for fit and durability.

• Direct-fit replacement for Dana 300 (D300) transfer cases
• Complete kit includes shift knob, shift pattern insert, and locknut
• High-quality materials designed for a factory look and feel
• Manufacturer Part Number: 18607.07
• Replaces OE Part Numbers: 3241062, 3241430, 4006495
• Backed by a Limited 5-Year Warranty

Fits 1972-1979 Jeep CJ5, CJ6, and CJ7 models equipped with the Dana 20 transfer case.

This Omix replacement transfer case shifter knob is designed to restore the original interior look and functionality of your classic Jeep. Molded from durable black plastic, it features the correct shift pattern for the Dana 20 transfer case, ensuring clear gear identification during operation. As a direct-fit replacement for the original equipment, this knob installs easily onto the factory shifter lever.

• Direct OE-style replacement for a factory-correct fit and finish
• Molded black plastic construction for durability
• Includes printed Dana 20 shift pattern
• Replaces OE Part Number: 5355941
• Manufacturer Part Number: 18607.02
• Limited 5-year warranty

Fits 1976-1979 Jeep CJ5 and CJ7 models equipped with the Dana 20 transfer case.

This Omix replacement transfer case shifter boot is designed to restore the look and function of your Jeep's interior while sealing out dust and road noise. Molded from durable black rubber to meet or exceed OE standards, this boot includes an internal metal ring for superior base rigidity and a secure fit against the transmission tunnel or floor pan.

• Direct OE-style replacement for factory part 5353263
• Constructed from high-quality black rubber for long-term durability
• Internal metal ring provides reinforced base mounting and shape retention
• Base Dimensions: 4-1/8 in. x 8-7/8 in. x 3-1/8 in.
• Shifter Hole Diameter: 5/8 in.
• Manufacturer Part Number: 18606.03
• Backed by a Limited 5-Year Warranty

Fits 1946-1971 Jeep and Willys CJ-2, CJ-3, CJ-5, and CJ-6 models equipped with the Dana 18 transfer case.

Restore your vehicle's interior and seal out road debris with this Omix transfer case shifter boot. Specifically engineered for Dana 18 units featuring dual shift levers, this boot serves as a direct-fit replacement for weathered, cracked, or missing factory rubber. It maintains the original OE style and provides a reliable barrier against moisture and dust entering the cabin through the transmission tunnel.

• Direct OE-style replacement for a precise fitment
• Durable black rubber construction resists cracking and environmental wear
• Designed for Dana 18 transfer cases with dual lever configurations
• Replaces original equipment part number: 801058
• Manufacturer Part Number: 18606.01
• Back by a limited 5-year manufacturer warranty

Fits 1972-1979 Jeep CJ5, CJ6, and CJ7 models equipped with the Dana 20 transfer case.

Restore the sealing integrity of your Jeep drivetrain with this comprehensive Omix Transfer Case Gasket and Seal Kit. Designed as a direct-fit solution to address common leak points in the Dana 20 unit, this kit replaces worn or brittle OE components that lead to fluid loss and potential internal wear. Every gasket and seal is manufactured to meet or exceed original equipment standards for fitment and material durability, ensuring a reliable seal under the high-stress conditions of off-road and street use.

• Direct-fit replacement for OE part number 8130995
• Comprehensive kit includes input and output shaft seals
• Features shift rail seals to prevent top-side leaks
• Includes pan gasket, front housing gasket, and PTO cover gasket
• Engineered for 1972-1979 Jeep CJ series with Dana 20 transfer cases
• Manufacturer Part Number: 18603.02
• Limited 5-Year Warranty

Fits select 1984-2001 Jeep Cherokee XJ models.

This Omix heavy-duty rear leaf spring is engineered to restore the original ride height and suspension performance of your Cherokee. Designed as a direct-fit replacement for worn or sagging factory springs, this HD version features a 4-leaf construction and a 545 lb. load rating to maintain vehicle stability and handling. It is manufactured to match factory geometry for a precise installation into the original mounting locations.

• Heavy-duty 4-leaf spring design
• Load Rating: 545 lbs.
• Width: 2.375 inches
• Length: 50 inches (center-to-center) / 53.125 inches (overall)
• Replaces OE Part Number: 52000545
• Manufacturer Part Number: 18280.17

Note: Sold individually; two springs are required per vehicle. For a complete installation, it is recommended to use pivot eye bushing 18280.07 and shackle end bushing 18280.08.

Fits 1987-1995 Jeep Wrangler YJ across all trims including Sahara, Laredo, Renegade, and Sport.

Restore your Jeep's handling and cornering stability with this Omix front stabilizer bar. Designed as a direct-fit replacement for worn or damaged factory sway bars, this component is critical for reducing body roll and maintaining predictable suspension geometry. It is manufactured from high-strength steel to meet OE specifications, ensuring long-term durability under both street and trail conditions.

• Direct OE-style replacement for factory part 52003142
• Sturdy steel construction with a 1.165-inch outer diameter (OD)
• Restores factory handling characteristics and steering response
• Designed for use with Omix sway bar end links (18272.12) and bushings (18272.03)
• Manufacturer Part Number: 18272.06
• Backed by a Limited 5-Year Warranty

Fits 1987-1995 Jeep Wrangler YJ submodels including Base, Sahara, Sport, and SE. This Omix leaf spring shackle kit is an OE-style direct replacement designed to restore proper suspension geometry and articulation. Over time, factory shackles often succumb to corrosion or bushing fatigue, leading to sloppy handling and increased noise. This kit replaces worn-out components with durable, precision-engineered hardware to maintain the Jeep legend.

• Precision Fit: Replaces OE part number 52040415K for a reliable, bolt-on installation.
• Comprehensive Kit: Includes 2 shackle brackets, 4 bushings, 2 sleeves, 2 bolts, 2 nuts, and washers.
• Usage Note: One kit services a single leaf spring. To replace all shackles on a vehicle, 4 kits are required.
• Construction: OE-style materials and finishes ensure durability and corrosion resistance.
• MPN: 18271.22
• Warranty: Covered by a limited 5-year manufacturer warranty.

Fits 1976-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler models.

Restore the handling and ride quality of your Jeep's leaf spring suspension with this Omix OE-style pivot eye bushing. Designed to meet or exceed factory performance standards, this bushing replaces worn, cracked, or dry-rotted rubber that leads to suspension play, wandering, and audible clunking. This bushing is specifically designed to fit the front pivot of the rear leaf spring on 1976-1986 CJ models, and fits either the front or rear leaf spring pivot eyes on 1987-1995 Wrangler YJ models.

• Construction: High-quality rubber bonded to a steel outer casing for maximum durability
• Outer Diameter: 1.5 inches
• Overall Length: 2.75 inches
• Mounting Position: Rear Main Eye (CJ) / Front or Rear Eye (YJ)
• Direct Replacement: Engineered to factory tolerances for a hassle-free installation
• Reference Part Number: 18271.19
• OE Interchange: Replaces 52002551
• Quantity: Sold individually
• Warranty: Limited 5-Year Manufacturer Warranty