Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Maintain the structural integrity of your Jeep's front suspension with this Omix OE-style replacement front leaf spring plate. Specifically engineered for the driver (left) side, this plate serves as a heavy-duty mounting point for your leaf springs and U-bolts. It replaces worn, corroded, or bent factory plates to ensure proper axle alignment and suspension stability on and off the trail.

Constructed from high-strength steel, this component is designed to meet or exceed original equipment specifications for durability and fitment. It offers a direct-bolt-on solution that restores factory-level performance to your classic Jeep's front end.

• Position: Front Left (Driver Side)
• Material: High-strength steel
• Dimensions: 4 inches x 7 inches
• Replaces OE: 5359011
• Fitment: 1976-1986 Jeep CJ models
• Manufacturer Part Number: 18271.15
• Warranty: Limited 5-year warranty

Note: For the corresponding right rear spring plate, use Omix part 18271.16.

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore original handling characteristics and suspension stability with this OE-style front sway bar end link from Omix. Designed as a direct-fit replacement for worn, bent, or snapped factory links, this component ensures your front sway bar maintains proper alignment and tension during cornering and off-road articulation. Each link is manufactured to precise tolerances for a bolt-on installation that requires no modification to the factory mounting points.

This unit is sold individually and fits both the left (driver) or right (passenger) side of the vehicle; two are required per front axle. The assembly comes complete with necessary bushings to refresh your front suspension hardware in one step.

• Position: Front (Left or Right)
• Fitment Type: Direct Replacement
• Replaces OE Number: 5364122
• Includes pre-installed rubber bushings
• Manufacturer Part Number: 18271.08
• Limited 5-Year Warranty

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Protect your Jeep’s chassis and suspension with the Omix 18271.07 axle snubber. This direct OE-style replacement provides a critical cushion between the axle and the frame, preventing harsh metal-on-metal contact and dampening impact during full suspension compression. Built to original equipment standards, it features dense, durable rubber vulcanized to a heavy-duty steel mounting plate for maximum service life.

This snubber is designed for universal fitment on the vehicle, meaning it can be used on either the front or rear axle and on the driver or passenger side. While sold individually, four units are required to completely replace all factory snubbers on a single vehicle.

• Manufacturer Part Number: 18271.07
• Replaces OE Number: 5355483
• Dimensions: 1.60" Wide x 4.00" Long x 1.90" Tall
• Construction: Dense rubber bonded to steel plate
• Placement: Front or Rear; Left or Right side
• Quantity: Sold individually (4 required per vehicle)
• Warranty: Limited 5-Year Manufacturer Warranty

Fits select 1976-1986 Jeep CJ5, CJ7, CJ8 Scrambler, and 1987-1995 Wrangler YJ models.

This Omix leaf spring main eye bolt and nut is a direct-fit replacement for worn, corroded, or seized factory hardware. As a critical suspension component, the main eye bolt secures the leaf spring to the chassis or shackle mount, ensuring proper axle alignment and handling. This Grade 8-style hardware is designed to meet or exceed OE specifications for a reliable repair on classic Jeep suspension systems.

This assembly is universal for front or rear and left or right positions. While sold individually, four units are typically required to replace all main eye hardware on a single vehicle.

• Direct OE-style replacement for factory part G9419209K
• 9/16-inch diameter bolt with 3/4-inch hex head
• 4.75-inch shaft length
• Includes matching hex nut
• Manufacturer Part Number: 18271.06
• Limited 5-year warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

This Omix front frame shackle hanging bracket is an OE-style replacement designed to restore the integrity of your Jeep's front suspension. Over time, factory brackets can suffer from fatigue or corrosion; this direct-fit metal component ensures your leaf spring shackles are securely mounted to the frame rail. Precisely engineered to match original equipment specifications, it maintains correct suspension geometry for both on-road handling and off-road durability.

• Direct fit for front frame location
• Fits either left (driver) or right (passenger) side
• High-strength metal construction with OE-style finish
• Replaces original equipment part number: 5355689
• Sold individually (2 required per vehicle)
• Manufacturer Part Number: 18271.04
• Limited 5-year manufacturer warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore your vehicle's suspension geometry and eliminate the rattles associated with worn suspension hardware with the Omix Rear Leaf Spring Shackle Kit. Over time, OE shackles are prone to corrosion and bushing dry-rot, which compromises handling and ride quality. This kit is engineered to factory standards to provide a direct-fit replacement that restores the connection between your leaf springs and the chassis.

• Durable Construction: Manufactured from high-strength steel with a black finish for long-term durability.
• Complete Kit: Includes the shackle assembly and necessary rubber bushings for a comprehensive refresh.
• Compatibility: Specifically designed for the rear leaf spring position on CJ-series Jeeps.
• OE Replacement: Engineered to replace factory part number 5357497.
• Specifications: Sold individually (two required per vehicle); for the front shackle kit, see part number 18271.01.
• Manufacturer Part Number: 18271.02
• Warranty: Limited 5-year manufacturer warranty.

Fits 1976-1986 Jeep CJ5, CJ7, and CJ8 Scrambler models.

Restore the handling and ride quality of your classic Jeep with this Omix front leaf spring shackle kit. Designed as a direct OE-style replacement, this kit addresses the common issue of worn shackle bushings and hardware that leads to sloppy steering and suspension noise. This kit features a 3-inch center-to-center measurement and includes all the necessary components to service a single front leaf spring assembly.

• Replacement for OE part number: 5357620K
• Shackle dimension: 3-inch center-to-center
• Includes one shackle, four bushings, and necessary mounting hardware
• Enough components to complete one front spring
• Manufacturer Part Number: 18271.01
• Backed by a limited 5-year warranty

Fits 1941-1960 Jeep Willys MB and CJ-2, CJ-3, CJ-5, and CJ-6 models.

Keep your vintage Jeep suspension operating smoothly with this OE-style greaseable shackle kit from Omix. Designed as a direct replacement for worn or seized factory hardware, this kit features a greaseable pin to ensure long-term serviceability and quiet operation. This specific shackle uses left-hand threads and is designed for use on the front left (driver side) and right rear (passenger side) positions. Replacing worn shackles restores proper spring movement and prevents the binding often found in decades-old suspension components.

• Position: Front Left or Right Rear
• Thread Direction: Left Hand (LH)
• Construction: OE style steel with greaseable fitting
• Quantity: Sold individually (two kits required per vehicle)
• Manufacturer Part Number: 18270.12
• Replaces OE Number: 802061
• Warranty: Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ and 1987-1995 Wrangler YJ models.

Omix 8-degree rear leaf spring shims are engineered to correct drivetrain pinion angle misalignment, a common issue following the installation of a suspension lift. These shims rotate the rear axle housing to restore proper driveline geometry, helping to eliminate unwanted vibrations and prevent premature U-joint failure. Each shim is precision-machined from aluminum to withstand the stresses of off-road use while maintaining a secure seat within the leaf spring pack.

• Function: Corrects rear pinion angle on lifted suspensions
• Material: Aluminum construction
• Width: 2.5 inches
• Length: 4.75 inches
• Height: 0.93 inches
• Quantity: Pair (Includes two shims)
• Manufacturer Part Number: 18206.02
• Warranty: Limited 5-year manufacturer warranty

Fits 1976-1986 Jeep CJ and 1987-1995 Jeep Wrangler YJ models.

Omix leaf spring shims are engineered to correct pinion angle issues often encountered after installing a suspension lift. By rotating the axle housing, these shims help align the differential yoke with the driveshaft, reducing driveline vibration and preventing premature U-joint wear. Constructed from durable aluminum, these shims are designed for rear leaf spring applications with a 2.5-inch width.

• Angle: 6 Degrees
• Material: Aluminum construction
• Width: 2.5 inches
• Length: 4.75 inches
• Height: 0.75 inches
• Quantity: Includes one pair (2 shims)
• Manufacturer Part Number: 18206.01
• Warranty: Limited 5-Year Warranty

Fits 1941-1953 Willys MB and Jeep CJ-2, CJ-3. This Omix replacement rear leaf spring restores original ride height and suspension geometry for vintage military and civilian Jeep models. Precision-engineered to original equipment standards, this 9-leaf spring replaces worn or sagging factory units to ensure proper axle support and load handling.

• Design: 9-leaf stack for durability and correct spring rate
• Measurement: 40.25 inches center-to-center distance
• Installation: Direct fit; compatible with left or right side positions
• Fitment Note: Sold individually; two (2) units required per vehicle
• OE Cross-Reference: Replaces original part number A-614
• Warranty: Backed by a Limited 5-Year Warranty

For a complete installation, it is recommended to replace accompanying hardware. This spring is compatible with pivot eye bushing 18270.17 and requires shackle 18270.12 (LH thread) and 18270.13 (RH thread).

This Omix replacement front leaf spring is engineered to restore factory ride height and suspension geometry on 1987-1995 Jeep Wrangler YJ models. Built to meet OE specifications, this 4-leaf spring provides a direct-fit solution for worn, sagging, or cracked factory springs, ensuring your Jeep maintains proper axle alignment and handling characteristics on and off the trail.

Each spring is sold individually and features a non-directional design that fits either the front driver or front passenger side. For a complete front-end overhaul and level stance, two units are required per vehicle. This OE-style spring serves as a reliable replacement for restoring the original ride quality Jeep enthusiasts expect from Omix components.

• Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport)
• Configuration: 4-leaf design for OE-equivalent load capacity
• Position: Front (Left or Right side)
• Replacement Part Number: OE 52003448
• Manufacturer Part Number: 18201.20
• Installation Note: Requires pivot eye bushing 18271.19 and shackle kit 18271.22 (sold separately)
• Warranty: Limited 5-Year Warranty

Fits 1972-1983 Jeep CJ5, CJ7, and Scrambler models. Restore precise steering response and vehicle safety with this Omix tie rod assembly. Engineered as a direct-fit replacement for worn factory components, this assembly addresses steering wander and loose handling by providing the structural integrity required for off-road and on-road use.

This complete kit simplifies the repair process by including all essential steering linkage components. Each part is manufactured to OE specifications to ensure proper alignment geometry and service life. The assembly replaces original equipment number 5356105 and features a durable finish to resist corrosion.

• Direct-fit OE-style replacement for factory part 5356105
• Complete assembly includes long tie rod, short tie rod, adjusting sleeve, and clamps
• Restores original steering geometry and handling characteristics
• Manufacturer Part Number: 18054.01
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (Rubicon, Sahara, Sport, X, 70th/75th Anniversary).

Restore your steering precision and eliminate front-end play with this Omix Drag Link Kit. Designed as a direct OE-style replacement, this kit addresses loose steering and wandering often caused by worn or damaged drag link components. Each piece is engineered to meet or exceed original equipment standards, ensuring your Jeep maintains reliable handling on and off the trail.

• Direct-fit replacement for factory steering components
• Restores proper steering geometry and road feel
• Includes long tie rod, short tie rod, and adjusting sleeve
• Manufacturer Part Number: 18050.11
• Limited 5-Year Warranty

Fits 1976-1995 Jeep CJ5, CJ7, CJ8 Scrambler, and Wrangler YJ models. Restore the control and interior aesthetics of your classic Jeep with this Omix OE-style replacement steering wheel. Built to meet or exceed original factory specifications, this direct-fit wheel replaces worn, cracked, or sun-damaged steering components to ensure a safe and comfortable driving experience.

This steering wheel features a durable black vinyl rim engineered for longevity in open-top environments. It utilizes a 36-spline hub for precise installation onto the factory steering column, maintaining the original equipment dimensions for a familiar feel behind the wheel. Whether you are performing a concours restoration or a trail-ready build, this unit provides the authentic appearance and function required for 1976-1995 Jeep vehicles.

• Material: Durable black vinyl rim
• Diameter: 15 inches
• Depth: 4.25 inches
• Mounting: 36 splines
• Manufacturer Part Number: 18031.05
• Replaces OE Number: 8133016
• Warranty: Limited 5-year warranty

Fits 1946-1960 Jeep and Willys CJ-2, CJ-3, CJ-5, and CJ-6 models.

Restore the interior of your classic Jeep with this Omix OE-style replacement steering wheel. Engineered to meet or exceed original equipment standards, this steering wheel is a direct-fit solution for worn or damaged factory components. It features a 36-spline hub for precise engagement with the steering shaft and a classic black finish to maintain an authentic cockpit appearance.

• Direct fit OE-style replacement for factory part number 914047
• Features a 36-spline internal mount for secure installation
• Designed to accept a 1.25 in. horn button (compatible with horn button 18032.02)
• High-quality construction finished in black
• Limited 5-year manufacturer warranty
• Manufacturer Part Number: 18031.01

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models equipped with power steering.

The Omix HD Lower Power Steering Shaft is engineered to restore precise steering response and eliminate the excess play often found in worn or high-mileage factory units. This heavy-duty replacement shaft is designed specifically for CJ models with power steering setups, offering a more rugged construction than standard components to handle the rigors of both street and trail use. It serves as a direct-fit replacement for OE part number 5354934HD, mounting securely into the factory positions without modification.

• Heavy-duty steel construction for enhanced durability and service life
• Direct-fit OE style replacement for seamless installation
• Replaces factory OE part number: 5354934HD
• Manufacturer Part Number: 18024.02
• Backed by a limited 5-year manufacturer warranty

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

This Omix heavy-duty lower manual steering shaft is engineered to restore precise steering response by replacing worn or damaged factory components. Designed specifically for Jeeps equipped with manual steering boxes, this shaft features a direct-fit, OE-style design for straightforward installation without modification. Built with heavy-duty construction to withstand the rigors of both daily driving and off-road trail use, it ensures a reliable, slop-free connection between the steering column and the gear box.

• Heavy-duty construction for increased durability and safety
• Direct-fit replacement to eliminate steering play
• Maintains original equipment (OE) style and geometry
• Replaces OE part number 5353135HD
• Manufacturer Part Number: 18024.01
• Includes limited 5-year manufacturer warranty

Fits select 1984-1994 Jeep Cherokee (XJ), CJ7, Scrambler (CJ8), and Wrangler (YJ). This Omix steering column to firewall seal is a direct-fit replacement designed to restore the cabin's environmental seal. Over time, factory rubber seals degrade and crack, allowing engine heat, road noise, and fumes to leak into the passenger compartment. This OE-style seal installs at the firewall to ensure a tight, weather-resistant barrier around the steering column shaft.

• Direct replacement for models without a tilt steering column
• OE-style rubber construction for proper fitment and durability
• Prevents environmental contaminants from entering the cabin
• Replaces OE part number: 8120097
• Manufacturer Part Number: 18020.02
• Includes limited 5-year manufacturer warranty

Fits 1976-1995 Jeep CJ5, CJ7, CJ8 Scrambler, and Wrangler YJ models.

Restore steering column integrity and eliminate excessive play with this Omix steering shaft repair kit. Over years of use, the internal bearings and retainers in vintage Jeep steering columns wear down, resulting in a loose or wandering steering feel. This kit provides an OE-style solution to rebuild the shaft interface, ensuring precise steering input for both daily driving and off-road technical maneuvers.

• Direct-fit replacement for factory steering shaft components
• Replaces OE Part Number: 4487696K
• Includes: Shaft retainer, bearing, bearing retainer, and clip
• Manufacturer Part Number: 18019.03
• Backed by a Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models equipped with manual steering.

This Omix manual steering lower shaft is engineered as a direct-fit replacement for worn or loose factory steering components. Restoring the link between the steering column and the steering gear is critical for maintaining precise handling and vehicle safety on or off the trail. This complete assembly is designed to meet or exceed OE specifications for fitment and durability, ensuring a firm, responsive steering feel.

• Direct replacement for OE part number: 5353135
• Complete kit includes shaft assembly, coupler, boot, bearing, ring, and nut
• Designed specifically for manual steering configurations
• Precision-machined for exact fitment to factory mounting points
• Manufacturer Part Number: 18016.01
• Backed by a limited 5-year manufacturer warranty

Fits 1997-2001 Jeep Wrangler TJ models, including Sahara, SE, and Sport. This Omix replacement A/C plenum door lever is engineered to restore proper functionality to your Jeep's HVAC system by replacing damaged or brittle factory components.

As Jeeps age, the plastic levers within the heater box often become brittle and snap, leading to a loss of airflow control to the defrost vents. This direct-fit lever attaches specifically to the upper defroster door, ensuring consistent climate control and visibility. It is designed to match the original equipment (OE) specifications for a seamless installation without modifications.

• Replaces OE part number 5014108AA
• Direct-fit replacement for the upper defroster door lever
• Total length: 2-1/8 inches
• Restores proper defroster operation and airflow
• Manufacturer Part Number: 17910.02
• Limited 5-year warranty

Fits 1997-2001 Jeep Wrangler Sahara, SE, and Sport models.

Restore precise climate control to your Jeep's interior with this Omix A/C plenum door lever. As a common failure point in aging Wrangler TJ HVAC systems, a snapped or worn lever can prevent the blend doors from moving, leaving your vents stuck in one position. This direct-fit replacement installs into the lower AC panel assembly, reconnecting your controls to the plenum doors for factory-standard airflow and temperature adjustment.

• Direct OE-style replacement for a factory-correct fit and function
• Replaces original equipment part number 4886086AB
• Precision-molded for exact 2-5/8 inch length and engagement
• Engineered specifically for 1997-2001 Jeep Wrangler (TJ) models
• Omix Part Number: 17910.01
• Backed by a Limited 5-Year Warranty

Fits select 1978-1990 Jeep CJ5, CJ7, Scrambler, and Wrangler YJ.

The Omix Heater Motor Seal is an essential direct-fit replacement designed to maintain the efficiency of your Jeep's HVAC system. This seal mounts between the heater blower motor and the firewall, preventing air leaks and ensuring that the blower motor delivers maximum airflow into the cabin. Over time, original foam seals dry out and crumble, leading to temperature loss and poor HVAC performance.

Constructed from high-quality foam rubber to match original equipment specifications, this seal provides the necessary compression to eliminate gaps. It is a critical component for any heater box restoration or blower motor replacement to ensure your climate control system functions as intended.

• Durable foam rubber construction resists degradation from heat and moisture
• Precision OE-style cut for a direct-fit application
• Seals the blower motor to the firewall to prevent air loss
• Replaces original equipment part number 5462710
• Manufacturer Part Number: 17908.02
• Limited 5-Year Warranty

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, Sahara, SE, and Sport.

This Omix replacement heater defroster hose is engineered to restore efficient airflow to your windshield. Over time, original plastic ducting often becomes brittle and cracks, leading to poor defrosting performance and reduced cabin comfort. This direct-fit component restores the critical connection between the heater case and the windshield defroster duct.

• Oval-shaped duct hose designed for factory-accurate routing
• Direct-fit OE style replacement for simple installation
• Replaces original equipment part number: 56001472
• Manufacturer Part Number: 17907.07
• Back by a limited 5-year manufacturer warranty

Fits 1978-1986 Jeep CJ5, CJ7, and Scrambler models. This Omix replacement defroster duct deflector pair is engineered to restore factory-spec heating and A/C performance by directing critical airflow toward the windshield for moisture removal and clear visibility. Over decades, factory plastic ducts often become brittle and crack; these OE-style replacements provide a direct fit to ensure your ventilation system remains sealed and efficient.

Precision-molded for an exact fit in the dash assembly, these deflectors are manufactured to meet or exceed original equipment standards. Each set includes both the driver and passenger side components, allowing for a complete overhaul of the upper dash ducting system.

• Replaces OE Part Number: 5750340K
• Material: High-quality molded plastic
• Dimensions: 15-5/8 inch overall length and 1 inch depth
• Sold as a pair (LH and RH)
• Installation: Direct fit mounting to factory points
• Manufacturer Part Number: 17907.04
• Warranty: Limited 5-year manufacturer warranty

Fits 1978-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models.

Restore proper airflow to your windshield with the Omix replacement defroster duct. Over decades of heat cycles and dashboard exposure, original plastic ducts often become brittle, crack, or warp, leading to lost defrosting performance and reduced visibility. This direct-fit component is designed to replace factory unit 5461591, ensuring your heater and A/C system can effectively clear moisture and frost from the glass.

Constructed from durable molded plastic, this duct features a 5.5 x 2.5-inch input and an 11 x 1.75-inch output for a precise interface with the CJ ventilation system. It bolts directly to the factory mounting points for a straightforward installation that requires no modifications to the dash structure.

• Direct replacement for OE part number 5461591
• Precision molded plastic construction
• Input Diameter: 5.5 in. x 2.5 in.
• Output Dimensions: 11 in. x 1.75 in.
• Compatible with 17907.02 defroster hose (sold separately)
• Manufacturer Part Number: 17907.03
• Limited 5-year warranty

Fits 1978-1986 Jeep CJ5, CJ7, and Scrambler (CJ8).

Restore efficient airflow to your Jeep's windshield with this Omix Heater Defroster Hose. Over time, original ducting can crack, dry rot, or collapse, resulting in poor defrosting performance. This direct-fit replacement is engineered to OE specifications, ensuring your heating and ventilation system functions at peak efficiency. It features integrated clamps for a secure, leak-free connection to the heater box and defroster duct.

• Direct-fit replacement for OE part number 5462328
• Integrated clamps for a secure, easy installation
• Inlet/Outlet dimensions: 5-1/4 in. x 3 in.
• Fully extended length: 9-3/4 in.
• OE-style construction for factory-correct fitment
• Limited 5-year manufacturer warranty
• Manufacturer Part Number: 17907.02

Fits 1955-1977 Jeep CJ3, CJ5, CJ6, CJ7 and Willys CJ-3, CJ-5, and CJ-6 models.

Restore the efficiency of your vintage Jeep's heating and ventilation system with this direct-fit replacement defroster duct from Omix. Over time, original ducts can become brittle, cracked, or clogged, preventing proper airflow to the windshield. This OE-style duct ensures moisture is removed effectively for a clear view of the road in all weather conditions. It is engineered to factory specifications for a seamless installation using existing mounting points.

• Direct replacement for a precise, hassle-free fit
• OE-style construction and finish
• Outlet dimensions: 14-1/8 inches x 2 inches
• Inlet diameter: 2-3/4 inches
• Replaces original equipment number: M1111
• Manufacturer Part Number: 17907.01
• Limited 5-year manufacturer warranty

Fits 1991-1995 Jeep Wrangler YJ (Base, Islander, Renegade, Rio Grande, S, Sahara, SE).

Restore precise control over your Jeep's ventilation with the Omix Heater Defroster Cable. Over time, factory HVAC cables can stretch, bind, or snap, leaving your blend doors stuck and your defrost or floor vents inoperable. This direct-fit replacement is engineered to match OE specifications for smooth operation and reliable climate control.

Built by Omix, a brand dedicated to maintaining Jeep heritage, this cable features the correct red end clip for easy identification and installation within the dashboard assembly. It replaces worn or broken factory cables to ensure your heater and A/C system functions at its best.

• Direct-fit OE style replacement ensures proper fitment and function
• Features identifying red end clip
• Overall length: 26.75 inches
• Replaces OE part number: 55036908
• Manufacturer Part Number: 17905.06
• Backed by a limited 5-year warranty