Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• 27mm 3 point adjustable Front Sway Bar
• 32mm Tubular Rear Sway Bar

This Part Fits:

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• 30 levels of damping adjustment
• Fully threaded monotube body
• Front Spring Rate: 6 kg/mm
• Rear Spring Rate: 5 kg/mm
• Factory style mount

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Polyurethane Bushings to improved responsiveness and feel
• Offers -0.5 to +1.25 Caster Adjustment

This Part Fits:

This Part Fits:

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Greatly decreased stopping distance
• Retains factory parking brake cable
• Increased Fade Resistance
• Complete bolt on kit

This Part Fits:

This Part Fits:

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Polyurethane construction
• Hardened Crush tubes

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Fills Voids in Factory Bushings
• Reduces Axle Tramp
• Easy Installation

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Hardened Crush Tubes
• Voided to reduce NVH
• Reduces Axle Tramp

This Part Fits:

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Low compliance polyurethane
• Hardened Crush Tubes

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits:

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

• Nitrogen Gas Pressurized
• Precisely Tuned Valving
• Heavy Duty Construction

This Part Fits: