Fits select 1999-2004 Ford Mustang Base, GT, Bullitt, Mach 1, and SVT Cobra models (Excludes 2003-2004 Cobra).

Replace the dim, dated incandescent factory third brake light on your New Edge Mustang with the Raxiom Axial Series LED Third Brake Light. This high-output assembly utilizes 12 super-bright LEDs to provide crisp, instantaneous illumination, significantly improving vehicle visibility and safety for following drivers. The clear lens and chrome internal housing offer a modern, clean aesthetic that updates the rear profile of your vehicle.

Constructed from OEM-grade materials, this assembly features a durable ABS plastic housing and a UV-resistant polycarbonate lens. The internal electronics are fully weather-sealed to prevent moisture and debris from compromising performance. Designed as a direct bolt-on upgrade, this light uses a plug-and-play wiring harness for a straightforward installation that typically takes less than 15 minutes with basic hand tools.

• Illumination: 12 high-output red LEDs
• Material: Chrome ABS plastic housing with clear polycarbonate lens
• Compliance: DOT and SAE compliant for street use
• Installation: Direct plug-and-play replacement; no cutting or splicing required
• Manufacturer Part Number: 431422

Fits 1999-2004 Ford Mustang Base, GT, Bullitt, Mach 1, and SVT Cobra models.

Refresh your New Edge Mustang's front-end styling and nighttime visibility with Raxiom Axial Series Headlights. These units are designed to replace weathered, oxidized, or yellowing factory housings with a modern black-out aesthetic and upgraded LED functionality. The integrated LED bar serves as a high-visibility Daytime Running Light (DRL) and features a sequential turn signal function for a distinct, high-tech appearance.

Built to meet precise standards, these headlights feature durable black ABS plastic housings and impact-resistant clear polycarbonate lenses. The internal multi-faceted chrome reflectors ensure optimal light throw while maintaining a clean look with clear corner reflectors. Each housing is weather-sealed to prevent moisture and debris from compromising the internal electronics.

• Axial Series styling with integrated Sequential LED turn signals
• Black ABS plastic housings with clear polycarbonate lenses
• Multi-faceted chrome reflectors for optimized light output
• Direct plug-and-play replacement for factory housings
• DRL bar requires simple splicing into factory running lights
• Retains use of stock bulbs for straightforward maintenance
• Manufacturer Part Number: 422713

Fits 1999-2004 Ford Mustang Base, GT, Bullitt, Mach 1, and SVT Cobra.

Restore visibility and modernize the front-end aesthetics of your New Edge Mustang with Raxiom Axial Series Headlights. These units are designed to replace weathered or oxidized factory housings with a contemporary black-out look. Each headlight features an integrated white LED bar that functions as a daytime running light (DRL), providing a distinct light signature and improved vehicle presence during the day and night.

Built to precise standards using OEM-grade materials, these headlights utilize durable black ABS plastic housings and impact-resistant clear polycarbonate lenses. Internal multi-faceted chrome reflectors help maintain an efficient beam pattern. Each assembly is weather-sealed to prevent moisture and road debris from compromising the internal electronics. While the main lighting components are a direct plug-and-play replacement for factory housings, the LED DRL bar requires splicing into your existing running light circuit for operation.

• Manufacturer Part Number: 422712
• White LED daytime running light (DRL) accents
• Durable black ABS plastic housings with clear polycarbonate lenses
• Multi-faceted chrome reflectors and clear corner reflectors
• Weather-sealed to prevent moisture intrusion
• Direct bolt-on replacement for factory housings
• Designed to reuse stock primary light bulbs

Fits all 1994-2004 Ford Mustang models including Base, GT, Bullitt, GTS, Mach 1, and SVT Cobra / Cobra R.

Improve the rear visibility and modern styling of your SN95 or New Edge Mustang with Raxiom Axial Series LED License Plate Bulbs. These units are engineered as a direct replacement for dim factory incandescent lamps, utilizing high-output white LEDs to provide crisp, bright illumination. The crystal clear lenses ensure an OEM-style appearance while significantly increasing the light output over stock components.

Built for durability, these LED lamps feature weather-sealed housings to prevent moisture and road debris from damaging the internal electronics. They are fully DOT and SAE compliant, meeting or exceeding the strict guidelines for street-legal use. Installation is a straightforward plug-and-play process that requires no cutting or permanent modifications and can typically be completed in about 30 minutes with basic hand tools.

• Fits 1994-2004 Ford Mustang models
• High-intensity white LED technology
• Weather-sealed for long-term reliability
• Clear lens for clean, factory-style appearance
• DOT and SAE compliant for legal street use
• Direct plug-and-play installation
• Manufacturer Part Number: 417289

Fits select 2015-2023 Ford Mustang models, including EcoBoost, GT, V6, Mach 1, and Shelby GT350/GT500 variants.

Modernize your Mustang's rear lighting with the Raxiom Axial Series LED License Plate Lamps. These direct-fit units replace the dim factory incandescent lamps with high-intensity white LEDs, providing a cleaner aesthetic and significantly improved visibility. Engineered with clear lenses for a factory-style appearance, these lamps feature internal electronics that are fully weather-sealed against moisture, dirt, and road debris.

This kit is designed as a complete plug-and-play upgrade, mounting directly into the factory positions without the need for cutting or wiring modifications. Installation typically takes approximately 30 minutes using basic hand tools. These lamps meet or exceed strict DOT and SAE standards, ensuring they are fully legal for street use.

• Manufacturer Part Number: 414653
• Series: Axial Series
• Lens Finish: Clear
• Light Source: Super Bright White LED
• Quantity: Set of (2) Lights
• Compliance: DOT and SAE Compliant
• Installation: Direct Plug-and-Play

Fits 2003-2004 Ford Mustang SVT Cobra and SVT Cobra 10th Anniversary models.

Improve the visibility and safety of your 2003-2004 Terminator Cobra with the Raxiom Axial Series Sequential LED Third Brake Light. Designed to modernize your rear lighting, this unit features a distinct sequential function that pulses from the center outward before remaining solid while the brake pedal is depressed. This dynamic action is engineered to catch the attention of following drivers more effectively than standard static lights.

Built to precise standards using OEM-grade materials, this assembly features a durable black ABS plastic housing and a smoked polycarbonate lens. The internal electronics are fully weather-sealed to prevent moisture and debris from compromising the high-intensity LEDs. As a direct plug-and-play upgrade, it replaces your factory third brake light using the existing mounting points and electrical connectors, with installation typically taking less than 20 minutes.

• Sequential center-out illumination pattern for increased visibility
• High-intensity LED lighting for superior brightness over stock bulbs
• Durable black ABS plastic housing with a smoked polycarbonate lens
• Weather-sealed design to protect internal electronics
• DOT and SAE compliant for street use
• Direct plug-and-play installation
• Manufacturer Part Number: 413426

Fits 2003-2004 Ford Mustang SVT Cobra and 10th Anniversary models.

Improve the visibility and safety of your Cobra with the Raxiom Axial Series Sequential LED Third Brake Light. This direct-replacement unit features a modern sequential function: when the brake pedal is depressed, the LEDs illuminate from the center outward before staying solid to grab the attention of following drivers. Built to precise standards, this light modernization replaces the factory assembly with a high-performance LED array for faster response times and improved light output.

Constructed for longevity, this unit features a durable black ABS plastic housing and a red polycarbonate lens. The housing is weather-sealed to protect the internal electronics from moisture and dust intrusion. As a plug-and-play upgrade, it connects directly to the factory harness for an installation that typically takes less than 20 minutes using basic hand tools.

• Manufacturer Part Number: 413425
• Center-out sequential illumination pattern
• Modern LED technology for increased visibility
• Red polycarbonate lens with black ABS housing
• Weather-sealed electronics
• DOT and SAE compliant
• Plug-and-play installation

Fitment Table:

Fits 2003-2004 Ford Mustang SVT Cobra and 2003 SVT Cobra 10th Anniversary models.

Restore the rear visibility and factory appearance of your SVT Cobra with the Raxiom Axial Series OEM Style Replacement Third Brake Light. Designed as a direct swap for a cracked, faded, or malfunctioning factory unit, this assembly provides a clean OE look with the added reliability of modern LED lighting. The housing is fully weather-sealed to prevent dirt and moisture from compromising the internal electronics.

This third brake light is manufactured from OEM-grade materials to ensure precise fitment and long-lasting durability. Installation is a straightforward plug-and-play process that can typically be completed in approximately 20 minutes using basic hand tools.

• Direct OEM-style replacement for 2003-2004 SVT Cobra
• High-output integrated LED lighting
• Durable black ABS plastic housing
• Impact-resistant red polycarbonate lens
• Weather-sealed electronics for moisture protection
• DOT and SAE compliant
• Plug-and-play installation
• Manufacturer Part Number: 413423

Restore the front-end clarity and safety of your New Edge SN95 with the Raxiom Axial Series OEM Style Replacement Headlights (MPN 413419). Designed as a direct bolt-in solution for 1999-2004 Ford Mustangs, these headlights replace weathered, oxidized factory housings with a clean, black-housed aesthetic while maintaining the original equipment beam pattern.

• Fits 1999-2004 Ford Mustang (Base, GT, Bullitt, Mach 1, and SVT Cobra models)
• Durable black ABS plastic housings with multi-faceted chrome reflectors
• Impact-resistant clear polycarbonate lenses with amber corner reflectors
• Fully weather-sealed to protect internal components from dirt and moisture
• DOT and SAE compliant for street-legal use
• Direct plug-and-play installation; reuses factory bulbs

These one-piece units are manufactured to precise standards for a flush fit against factory body panels. As a direct replacement for your original assemblies, they require no modification to the vehicle's electrical system or wiring harness. Professional alignment is recommended after installation to ensure optimal beam throw and nighttime road visibility.

Fits all 2010-2012 Ford Mustang Base, GT, Boss 302, and Shelby GT500 models equipped with factory halogen headlights.

Restore the front-end aesthetics and nighttime visibility of your S197 Mustang with Raxiom Axial Series OEM Style Replacement Headlights. These units are designed to replace weathered, yellowed, or damaged factory housings with a fresh, aggressive look that maintains OE-level fitment. Featuring smoked polycarbonate lenses and multi-faceted chrome reflectors, these headlights provide a custom appearance without sacrificing light output.

Built from high-grade materials, each assembly features a durable black ABS plastic housing and is weather-sealed to protect the internal components from dirt and moisture. These headlights are a direct plug-and-play replacement for factory halogen units, though front fascia removal is required for access to the mounting bolts during installation. Proper headlight aiming is recommended following installation.

• Direct plug-and-play replacement (MPN 413417)
• Designed for factory halogen-equipped Mustangs only
• Durable smoked polycarbonate lenses
• Black ABS plastic housings with multi-faceted chrome reflectors
• Weather-sealed construction for long-term durability

Fits 2010-2014 Ford Mustang Base, Boss 302, GT, and Shelby GT500.

Modernize the exterior lighting on your S197 with the Raxiom Axial Series Smoked LED Side Marker Lights. This complete set replaces the dated, dim incandescent factory housings with razor-sharp SMD LED strips. The high-output red (rear) and amber (front) LEDs provide a continuous light bar appearance that eliminates hot spots and significantly improves visibility during day or night driving.

Built for durability, Raxiom utilizes injection-molded ABS plastic for the housings and impact-resistant smoked polycarbonate for the lenses. Each unit is fully weather-sealed to protect the internal electronics from moisture, dust, and road debris. Installation is a straightforward, direct-fit process—these markers plug directly into your factory wiring harness without any cutting, splicing, or external resistors required.

• Complete front and rear set (4 pieces)
• Aggressive smoked polycarbonate lenses
• High-output amber (front) and red (rear) SMD LED strips
• Durable injection-molded ABS plastic housings
• Weather-sealed for long-term reliability
• Direct plug-and-play installation; no resistors needed
• Manufacturer Part Number: 412496

Fits all 1999-2004 Ford Mustang models, including Base, GT, Bullitt, Mach 1, and SVT Cobra.

Raxiom Axial Series Smoked LED Rear Side Marker Lights (MPN 408818) provide a modern lighting and styling upgrade over the dim factory incandescent units. These markers feature high-output red SMD LED strips that deliver a continuous, sharp light pattern, eliminating the single "hot spot" found in original equipment. The aggressive smoked polycarbonate lenses are paired with durable injection-molded ABS plastic housings, which are weather-sealed to protect the internal electronics from moisture and road debris.

Installation is a straightforward direct-fit process. These markers are designed to plug into the factory wiring harness and snap into the stock mounting locations using the included Scotchlok connectors, requiring no permanent modifications to your Mustang.

• Includes driver and passenger side rear markers
• High-output red SMD LED strip lighting for increased visibility
• Aggressive smoked polycarbonate lenses
• Durable, weather-sealed ABS plastic housings
• Direct-fit installation with included Scotchlok connectors
• Manufacturer Part Number: 408818

Fits 2015-2017 Ford Mustang V6, EcoBoost, GT, and Shelby GT350/R models.

Enhance the rear visibility and safety of your S550 with the Raxiom Axial Series Smoked LED Diffuser Marker Light Kit. These units replace the passive factory-installed rear reflectors with high-output red LEDs for a modern look and improved presence on the road, day or night. Each housing is constructed from durable, injection-molded ABS plastic and features a dark smoked lens for an aggressive aesthetic that complements your Mustang’s rear styling. The electronics are weather-sealed to prevent moisture, dust, and road debris from compromising the internal circuitry.

• High-output red LEDs for superior illumination
• Aggressive smoked lenses for a sleek appearance
• Durable injection-molded ABS plastic housings
• Replaces factory rear diffuser reflectors
• Simple installation with no cutting required (wire splicing necessary)
• Weather-sealed for long-term durability
• Manufacturer Part Number: 406714

Fits select 2005-2009 Ford Mustang models including Base, Bullitt, GT, Shelby GT, GT500, and GT500KR.

Modernize the exterior lighting of your S197 Mustang with a pair of Raxiom Axial Series Smoked Rear LED Side Marker Lights. These units replace the dated factory incandescent bulbs and their localized "hot spot" illumination with a razor-sharp, high-output red SMD LED strip. This creates a clean, continuous lighting signature that significantly increases visibility during day or night driving.

Engineered for long-term durability, these side markers feature injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. The housings are fully weather-sealed to prevent moisture, dirt, and road debris from affecting the internal electronics. Installation is a direct plug-and-play process that utilizes your Mustang's factory wiring harness, requiring no cutting, splicing, or additional load resistors.

• Series: Axial Series
• Lens Finish: Smoked Polycarbonate
• Housing Material: Injected Molded ABS Plastic
• Illumination: High-Output Red SMD LED Strip
• Installation: Direct Plug-and-Play
• Manufacturer Part Number: 406293

Fits 2015-2023 Ford Mustang models, including EcoBoost, GT, V6, Mach 1, Bullitt, and Shelby GT350/GT500.

Eliminate the dated, localized "hot spot" of factory incandescent bulbs with Raxiom Axial Series Rear LED Side Marker Lights. These units feature high-output red LED strips that provide continuous, razor-sharp illumination across the entire lens. This upgrade significantly increases visibility for following traffic while modernizing the rear profile of your S550 Mustang.

Built for the long haul, Raxiom manufactures these markers using durable injection-molded ABS plastic housings. The housings are fully weather-sealed to protect the internal electronics from moisture, dust, and road debris. The red lenses maintain a classic look while the modern LED technology delivers superior brightness over OE components.

• Plug-and-Play: Direct replacement for factory housings; plugs directly into the OEM wiring harness.
• High-Output LEDs: Bright red LED strips replace weak factory incandescent bulbs for improved visibility.
• Durable Construction: Injection-molded ABS plastic with weather-sealed electronics.
• Simple Installation: Snap-in fitment with no cutting, splicing, or resistors required.
• Complete Set: Includes both driver and passenger side rear marker lights.
• Manufacturer Part Number: 404232

Fits 1999-2004 Ford Mustang Base, GT, and Mach 1 models (Excludes 2003-2004 Cobra).

Replace the dim factory incandescent bulb in your New Edge Mustang with the modern Raxiom Axial Series LED Third Brake Light. This unit utilizes 12 high-output LEDs to provide significantly sharper visibility than OEM lighting, improving safety by catching the attention of following drivers more effectively. Engineered from OEM-grade materials, it features a durable black plastic housing and a sleek smoked lens for a clean, customized appearance.

• Direct plug-and-play replacement for factory housing
• Equipped with 12 high-intensity LEDs
• 100,000-hour average LED service life
• OEM-grade construction with smoked lens and black housing
• Estimated 15-minute installation with basic hand tools
• Manufacturer Part Number: 398336

Fits 2005-2009 Ford Mustang GT.

Upgrade the lighting performance and front-end styling of your Mustang with the Raxiom Axial Series LED Halo Fog Lights. These units are engineered as a direct replacement for factory housings, utilizing high-intensity 10W CREE LEDs that produce 800 lumens to significantly improve visibility during inclement weather and nighttime driving. The integrated LED halo rings function as high-output Daytime Running Lights (DRL), outputting 900 lumens to ensure your vehicle is visible to others throughout the day.

Built for durability and longevity, these fog lights feature OEM-grade chrome plastic housings and clear lenses that are fully weather-sealed to protect the internal electronics from moisture and debris. With an average lifespan of 50,000 hours, these LEDs far outlast traditional incandescent bulbs. While the housings fit the factory mounting points, minor wiring is required to activate the DRL halo functionality; all necessary ballasts and a wiring harness are included.

• Two 10W high-intensity CREE LEDs (800 lumens per light)
• Integrated LED Halo DRL accents (900 lumens output)
• Durable chrome plastic housings with clear lenses
• Weather-sealed design to prevent moisture ingress
• 50,000-hour average LED lifespan
• Direct replacement for OE fog light housings
• Includes wiring harness and ballast
• Manufacturer Part Number: 398333

Fits all 2005-2009 Ford Mustang models including Base, GT, Bullitt, and Shelby GT/GT500/GT500KR variants.

Update the front-end aesthetics and nighttime visibility of your S197 with the Raxiom Axial Series CCFL Halo Projector Headlights. These units replace worn or weathered factory housings with a modern projector-style optic that provides a more focused beam pattern compared to traditional reflectors. The integrated accent halos utilize Cold Cathode Fluorescent Lighting (CCFL) technology, delivering a bright, consistent glow that sets your Mustang apart.

Constructed with stealthy black housings and smoked lenses, these headlights offer an aggressive look while maintaining street legality. They are DOT-compliant and include dual-element H13 bulbs to handle both high and low beam functions. Installation is straightforward as they are designed to fit the factory mounting points. Please note: these headlights are not intended for use on vehicles equipped with factory Daytime Running Lights (DRL).

• Manufacturer Part Number: 49121
• DOT Approved under Compliance # QR1200109
• Technology: CCFL Accent Halos with Projector Optics
• Finish: Black Housing with Smoked Lens
• Bulb Type: H13 Dual Element (Included)
• Quantity: One Pair (Left and Right)

Fits 1999-2004 Ford Mustang Base, GT, and Mach 1 models.

These Raxiom Smoked Tail Lights provide a significant aesthetic upgrade for the New Edge Mustang, replacing the factory red lenses with a modern, aggressive look. Each unit is manufactured to original equipment specifications from high-quality materials to ensure a precise, gap-free fit using factory mounting points. The combination of black internal housings and dark smoked lenses provides a custom appearance while remaining fully street legal.

Designed as a direct bolt-on replacement, these housings reuse your existing factory bulbs (bulbs are not included). For owners of 1999-2001 SVT Cobras with amber turn signals, these lights can be installed when used in conjunction with a 99-04 GT or V6 tail light harness.

• Smoked lenses with black internal housings
• Direct-fit OE-style installation
• DOT Approved (Compliance #QR1200131)
• Reuses factory bulbs and wiring
• Sold as a pair (Driver and Passenger side)
• Manufacturer Part Number: 49080

Fits 2015-2022 Ford Mustang EcoBoost, GT, and Shelby (GT350, GT350R, and GT500) models originally equipped with factory HID lighting.

Update the front-end aesthetics and lighting performance of your S550 Mustang with Raxiom Projector Headlights. These units feature a durable black housing and crystal-clear polycarbonate lenses, designed to integrate seamlessly with the modern body lines of the 2015-2022 chassis. Integrated bright white LED accents provide a distinct custom appearance while improving daytime visibility.

Engineered for high-performance output, these headlights utilize precision projector lenses to create a focused beam pattern, enhancing nighttime visibility compared to stock housings. Raxiom designed these as a direct plug-and-play replacement for factory HID-equipped models, allowing you to reuse your existing D3S bulbs and ballasts for a straightforward installation without cutting or splicing wiring.

• Fits 2015-2022 Ford Mustang models with factory HID systems
• Retains factory HID lighting components (D3S bulbs and ballasts)
• Black plastic housings with clear lenses and LED accent lighting
• Precision projector optics for a focused, bright beam pattern
• Weather-sealed construction protects internal electronics from moisture
• Plug-and-play installation; reuses factory mounting points
• Manufacturer Part Number: 407055

Note: Installation requires the temporary lowering of the front fascia to access the factory mounting bolts.

Fits all 2015-2023 Ford Mustang models, including V6, EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT500.

Update your S550 Mustang’s rear-end aesthetics with Raxiom Profile LED Tail Lights. These units feature durable gloss black housings paired with smoked polycarbonate lenses for a sleek, aggressive appearance. Engineered with high-intensity red LEDs, these lights provide crisp illumination for braking and signaling while maintaining the iconic sequential turn signal function that Mustang owners expect.

Designed as a direct bolt-on upgrade, these tail lights utilize a plug-and-play wiring harness for a straightforward installation that typically takes about 30 minutes with basic hand tools. Each assembly is weather-sealed to protect internal electronics from moisture and debris. Please note that while the turn signals sequence from the center out, the brake and hazard lights do not sequence. These lights are designed for US-spec models; use on EU or UK Mustangs requires wiring modifications.

• Manufacturer Part Number: 402183
• Sequential turn signal functionality (Signals only)
• Gloss black housings with smoked polycarbonate lenses
• Super bright red LED technology for brake and turn functions
• DOT and SAE compliant for street use
• Direct plug-and-play installation; reuses factory top trim plates
• Weather-sealed construction for long-term durability

Fits 2009-2014 Ford F-150 Lariat, XL, and XLT models without factory HIDs.

Improve nighttime visibility and modernize your truck's front end with Raxiom Projector Headlights. These units replace hazy or damaged factory housings with clear projector lenses that produce a sharper, more focused beam pattern than traditional reflectors. The integrated LED accents provide a distinct appearance, while the black internal housing adds a stealthy aesthetic without compromising light output through the clear polycarbonate lenses.

Built for durability and ease of installation, these headlights are a direct bolt-on replacement for your OE assemblies. They utilize factory mounting points and wiring, requiring only basic hand tools for setup. Each assembly is manufactured to meet or exceed DOT regulations and undergoes rigorous testing to ensure long-term performance in various driving conditions.

• Manufacturer Part Number: T542845
• Direct bolt-on installation to factory mounting points
• Impact-resistant polycarbonate lenses with amber reflectors
• High-quality black housings for a custom look
• Compatible with non-HID equipped Ford F-150 models
• DOT compliant for street use

Fits 2015-2017 Ford F-150 Lariat, XL, and XLT models equipped with factory halogen headlights.

Improve nighttime visibility and modernize your truck's appearance with Raxiom G3 Projector Headlights. These units replace standard factory reflectors with clear projector lenses that produce a sharp, focused beam pattern for a more controlled light output. The durable black housing is accented by high-intensity LED halo rings, providing a signature look while maintaining full DOT compliance for legal street use.

• Precision Optics: Projector lenses provide a concentrated light beam to reduce glare and improve road illumination.
• High-Intensity Accents: Integrated LED halo rings offer a bright, modern lighting signature.
• Durable Build: Constructed with weather-sealed black housings and scratch-resistant clear lenses for long-term reliability.
• Plug-and-Play Compatibility: Designed for a simple installation as a direct-fit replacement for vehicles with factory halogen headlights.
• Bulbs Included: Ships with H3 low beam and H1 high beam bulbs for immediate use.
• DOT Compliant: Manufactured to meet or exceed strict Department of Transportation rules and regulations.
• MPN: T542837

Fits select 2011-2016 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Platinum, XL, and XLT).

Upgrade your Super Duty's factory lighting with Raxiom LED Projector Headlights. These units replace standard reflector-style housings with precision projector lenses that provide a sharper, more focused beam pattern for improved night-time visibility. The sleek chrome housing and clear lens design maintain a clean, classic look while modernizing your truck's front end with integrated LED technology.

These headlights feature high-intensity LED illumination and integrated switchback turn signals, providing a distinct amber/white lighting transition. Built to withstand harsh environments, the assemblies feature fully sealed housings and impact-resistant lenses to protect against moisture, dust, and road debris. Designed for a straightforward installation, these headlights mount to factory locations, though minor wiring may be required to activate the switchback turn signal functions.

• Manufacturer Part Number: SD3621
• Headlight Style: Projector beam for superior light focus
• Housing Finish: Chrome
• Lens Color: Clear
• Turn Signal: Integrated LED switchback functionality
• Construction: Weather-sealed, impact-resistant housing
• Quantity: Sold as a pair (driver and passenger side)

Fits 2011-2016 Ford F-250 and F-350 Super Duty models.

Eliminate the dim, unsightly hot spots of your factory lighting with Raxiom Axial LED SEQL Sequential Switchback Side Mirror Marker Lamps. These high-output units modernize your truck's exterior while significantly improving side-profile visibility. Featuring an amber sequential turn signal and a crisp white running light function, these switchback markers offer a distinct visual upgrade over stock incandescent bulbs.

Engineered for durability in heavy-duty environments, these marker lamps are constructed with injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. Raxiom weather-seals every unit to protect the internal electronics from moisture, dust, and vibration. The direct plug-and-play design allows for a seamless installation into factory mounting points using the original wiring harness—no resistors, cutting, or splicing required.

• Sold as a pair (includes driver and passenger side)
• Sequential amber LED turn signal functionality
• Dual-color amber/white switchback illumination
• Injected-molded ABS plastic housings for superior durability
• Weather-sealed smoked polycarbonate lenses
• Direct plug-and-play installation into factory harness
• Manufacturer Part Number: SD18249

Fits 1997-2006 Jeep Wrangler TJ models, including SE, Sport, Sahara, X, Rubicon, and Unlimited.

Upgrade the lighting performance and exterior styling of your Wrangler with the Raxiom Axial Series Smoked LED Side Marker Lamps. These lamps replace the standard incandescent factory units with high-output amber SMD LED strips, providing a modern look and significantly brighter illumination for better visibility on and off the road. The three-row LED configuration eliminates the unsightly hot spots found in OE lighting for a sharp, uniform appearance.

• High-intensity amber SMD LED strips for a crisp, even light output
• Smoked polycarbonate lenses for a sleek, aggressive appearance
• Durable, injection-molded ABS plastic housings for long-term reliability
• Weather-sealed construction to prevent moisture and dirt ingress
• Direct plug-and-play installation with no cutting, splicing, or resistors required
• Complete set includes driver and passenger side front markers
• Manufacturer Part Number: J166834

Fits 2005-2012 Ford Mustang GT models.

Refresh your Mustang's front-end styling and improve foul-weather visibility with a set of Raxiom Yellow Fog Lights. Designed to replace hazy or damaged factory units, these lamps feature yellow/amber tinted lenses engineered to penetrate fog and haze by reducing reflected glare. These lights are a direct bolt-on for GT models, utilizing factory mounting points and the original wiring harness for a seamless installation.

• Includes driver and passenger side fog lights (Pair)
• Yellow/amber lenses optimized for visibility in rain, fog, and haze
• DOT compliant for street use under compliance # QR1200062
• Direct-fit replacement for factory fog light units
• Utilizes factory mounting brackets and wiring
• Manufacturer Part Number: 49135

Note: GT Mustangs not originally equipped with factory fog lights will require an aftermarket wiring harness for installation.

Fits 2005-2012 Ford Mustang GT.

Upgrade your vehicle's front-end styling and nighttime visibility with the Raxiom LED Halo Fog Lights (MPN 49133). These units are designed as a direct bolt-in replacement for scratched, faded, or pitted factory fog lights, mounting directly to the original factory locations without the need for modification. Each light features a high-intensity white LED halo ring that provides a modern accent to the Mustang GT's iconic grille-mounted lighting setup.

These fog lights are housed in a bright chrome casing for a clean, classic look and include H10 halogen bulbs to ensure consistent light output in dark or foggy conditions. Built to meet strict safety standards, these lights are DOT-approved for street use, ensuring both legal compliance and reliable performance.

• High-intensity white LED halo rings for accent lighting
• Chrome housing with clear lenses
• H10 halogen bulbs included
• Direct bolt-in replacement for OE fog lights
• DOT approved (Compliance # QR1200064)
• Manufacturer Part Number: 49133
• Sold as a pair

Fits 2015-2017 Ford Mustang EcoBoost, GT, V6, and Shelby GT350/GT350R models.

Upgrade the front-end aesthetics and lighting performance of your S550 with the Raxiom Axial Series LED Sequential Turn Signals. These units replace the factory incandescent turn signal housings with high-output LEDs for superior visibility and a modern look. They feature a dual-function design: bright white LEDs serve as Daytime Running Lights (DRL), while high-intensity amber LEDs provide a crisp sequential turn signal effect.

Constructed for durability, these turn signals feature injection-molded black ABS plastic housings and smoked polycarbonate lenses. Each assembly is weather-sealed to protect the state-of-the-art internal electronics from moisture, dust, and road debris. Designed as a direct plug-and-play replacement for US-spec vehicles, these lights require no cutting or wiring modifications for a clean installation that typically takes about an hour.

• Manufacturer Part Number: 408222
• Lighting Type: White LED DRL / Amber LED Sequential Turn Signal
• Lens Finish: Smoked Polycarbonate
• Housing Material: Black Injection-Molded ABS Plastic
• Installation: Direct Plug-and-Play (No cutting required)
• Note: Designed for US-spec Mustangs only; EU/UK models require wiring modifications

Fits all 2010-2014 Ford Mustang models, including Base, GT, Boss 302, and Shelby GT500.

Improve the rear visibility and safety of your Mustang with the Raxiom Smoked LED Third Brake Light. This unit replaces the dim factory incandescent housing with 16 high-intensity red LEDs that offer faster illumination and a sharper light output than the original equipment. The modern smoked lens provides a stealthy, custom look while maintaining full brightness when the brakes are applied.

Constructed from OEM-grade materials, this third brake light features a durable ABS plastic housing designed to withstand UV exposure and vibration. The assembly is fully weather-sealed to protect the internal electronics from moisture and dirt ingress. Engineered for a seamless fit, it serves as a direct plug-and-play replacement for the factory unit, requiring no cutting or wiring modifications. Installation can be completed in approximately 30 minutes with basic hand tools.

• Manufacturer Part Number: 405251
• Lighting: 16 Super Bright Red LEDs
• Lens: Smoked Polycarbonate
• Housing: Durable ABS Plastic
• Weather-sealed for moisture protection
• Simple plug-and-play installation