Fits 1997-2018 Jeep Wrangler TJ, JK, and Unlimited models (Rubicon, Sahara, Sport, and SE).

Raxiom LED Headlights are engineered to replace dim factory incandescent lamps with high-output illumination for superior nighttime visibility. These 7-inch round headlights feature integrated white LED accent halos that serve as Daytime Running Lights (DRL), giving your Jeep a modern look while increasing safety. Built to withstand off-road abuse, these units utilize high-intensity white CREE LEDs with a 6000K color temperature, providing a crisp beam pattern and a 50,000-hour lifespan.

The assemblies are constructed with rugged die-cast aluminum housings and crystal-clear polycarbonate lenses. Each light is epoxy-sealed to achieve an IP67 waterproof rating, protecting the internal electronics from moisture, dust, and vibration. These headlights are DOT and SAE compliant, meeting strict federal standards for street use. Installation is a direct plug-and-play process for most models using the included wiring harness adapters, typically completed in under an hour; DRL operation requires splicing into the factory side marker or running light circuit.

• High-intensity white CREE LEDs with 6000K color temperature
• Integrated white LED halo for Daytime Running Light (DRL) function
• IP67 waterproof rating with epoxy-sealed electronics
• Die-cast aluminum housing and impact-resistant polycarbonate lens
• DOT and SAE certified for legal street use
• 50,000-hour LED lifespan
• Includes plug-and-play wiring harness adapters
• Manufacturer Part Number: J155018

Fits select 2007-2023 Dodge Challenger, Charger, Ram 1500, and Jeep Wrangler JK.

Eliminate the sluggish pedal response inherent in modern drive-by-wire systems with the Raxiom SpeedForm Series Throttle Controller. While electronic throttle bodies offer precision, they often introduce an irritating delay between the pedal and the engine. This controller modifies the signal to the factory Throttle Position Sensor (TPS), providing a snappier, more immediate response for safer merging and passing.

The SpeedForm controller features five preset modes and nine levels of sensitivity adjustment per mode, allowing you to fine-tune the acceleration to your specific driving style. The system installs directly into the stock gas pedal harness using OEM-style plug-and-play connectors, requiring no permanent modifications or wiring splices. It is 100% reversible and designed not to leave residual codes on the factory PCM.

• Stock Mode (NO): Acceleration is set to factory defaults.
• ECO Mode (EC): Optimized for improved fuel economy.
• Comfort/Sport Mode (P1): Balances daily driveability with improved engine response.
• Sport Mode (P2): Significantly improves response for spirited commuting.
• Race Mode (P3): Maximum performance with immediate throttle engagement.
• Manufacturer Part Number: J132141
• Installation: Direct plug-and-play to the pedal assembly.

Fits all 2007-2018 Jeep Wrangler JK models, including Rubicon, Sahara, Sport, Unlimited, and X.

Improve the visibility and lighting response of your Wrangler with the Raxiom Axial Series LED Front Turn Signals. These smoked housings replace the dim, factory incandescent units with high-output amber LEDs that are significantly brighter than stock, ensuring your intentions are clear to other drivers during the day or at night. Integrated Daytime Running Light (DRL) accents provide a modern look and additional front-end presence.

Constructed with durable, dark-smoked polycarbonate lenses, these turn signals are built to withstand road debris and harsh trail conditions. The housings are fully weather-sealed to protect the internal electronics from moisture, dust, and vibration. Installation is a direct-fit replacement for the original housings, though access requires the temporary removal of the front grille. The turn signal functions are plug-and-play, while the DRL accents require splicing into the factory running light circuit.

• Includes both driver and passenger side housings
• Features (8) high-intensity amber LEDs per light
• Integrated LED Daytime Running Light (DRL) accents
• Dark smoked polycarbonate lenses for a blacked-out aesthetic
• Weather-sealed electronics for long-term reliability
• Detailed installation instructions included
• Manufacturer Part Number: J119943

Fits select 2015-2023 Dodge Challenger (SXT, R/T, GT, Scat Pack, T/A, and SRT Hellcat models); fits non-Widebody models only.

The Raxiom Axial Series Smoked LED Side Marker Lights (MPN CH3216) provide a sleek, modern styling upgrade for your Challenger's exterior. These units replace the factory incandescent housings with high-output SMD LED strips, delivering a sharp, continuous line of light that eliminates the dated "hot spot" look of the original equipment. These markers are significantly brighter than the stock incandescent lights, improving vehicle visibility in low-light conditions.

Engineered for durability and a precise fit, Raxiom manufactures these markers using injection-molded ABS plastic housings and impact-resistant smoked polycarbonate lenses. The housings are fully weather-sealed to protect the internal SMD electronics from moisture, dust, and road debris. Installation is a direct plug-and-play process; the markers snap into the factory mounting points and connect to the OE wiring harness without the need for resistors, cutting, or splicing.

• Includes high-output Amber (front) and Red (rear) SMD LED strips
• Aggressive smoked polycarbonate lenses with blacked-out aesthetic
• Durable injection-molded ABS plastic housings
• Weather-sealed construction protects internal electronics
• Direct plug-and-play installation into factory harnesses
• Manufacturer Part Number: CH3216

Fits 1996-2004 Ford Mustang Base, GT, and Mach 1, and 1997 SVT Cobra.

Correct the sequencing speed of your tail lights with the Raxiom Modified Turn Signal Flasher V1. This electronic relay is a direct replacement for the factory turn/hazard flasher, specifically engineered to slow down the flash rate of sequential tail light kits for a cleaner, more distinct look. Without this modified flasher, many sequential kits cycle too quickly, losing the visual impact of the three-segment sequence.

The Version 1 flasher is optimized for vehicles utilizing traditional incandescent bulbs. It features precision-engineered electronics to ensure consistent timing and reliable signaling. Installation is a simple plug-and-play process, swapping directly with the OE unit in the factory location.

• Direct replacement for the factory turn/hazard flasher relay
• Version 1: Optimized for use with incandescent bulbs
• Slows down sequential tail light kits for proper visual timing
• Simple plug-and-play installation with no wiring modifications required
• Manufacturer Part Number: 99032

Fits 2005-2009 Ford Mustang (Base, Bullitt, GT, Shelby GT, GT500, and GT500KR).

Update your vehicle's styling while enhancing road safety with Raxiom Directional Sideview Mirrors. These mirrors feature an integrated turn signal design to provide better visibility to surrounding traffic during lane changes and turns. Designed as a functional upgrade, they retain power adjustment capabilities and feature a textured black finish that matches your factory trim.

Constructed from high-impact acrylonitrile butadiene styrene (ABS), these housings are lightweight and engineered for long-term durability. The kit includes both driver and passenger side mirrors for a complete replacement. While the mirror housings bolt directly to the factory mounting points, the integrated turn signals require splicing into the factory wiring harness using the included scotch lock connectors. Interior door panel removal is required for installation.

• Integrated LED turn signal indicators for improved visibility
• Durable, automotive-grade ABS plastic construction
• OE-style textured black finish matches factory trim
• Maintains factory power adjustment functionality
• Direct bolt-on replacement for factory housings
• Includes driver and passenger side mirrors (Pair)
• Manufacturer Part Number: 94327

Fits 2005-2012 Ford Mustang GT models.

Update your S197's front-end lighting with the Raxiom Smoked Fog Light set. These assemblies are designed to replace worn, oxidized, or faded factory fog lights while adding a custom look with integrated CCFL (Cold Cathode Fluorescent Lamp) halo rings. The smoked lenses provide a sleek, darkened aesthetic without compromising the utility of your auxiliary lighting during night driving or inclement weather.

Each light is a direct-fit replacement for the OE housing, engineered to utilize the factory mounting locations for a straightforward installation. These lights are fully DOT-compliant, meeting the safety and quality standards required for street-legal use.

• Configuration: Full set includes both driver and passenger side assemblies
• Halo Technology: Integrated white CCFL accent rings
• Lens Finish: Smoked for a stealthier appearance
• Compliance: DOT-approved (Compliance # QR1200063)
• MPN: 49134

Fits all 2005-2009 Ford Mustang models, including Base, Bullitt, GT, Shelby GT, GT500, and GT500KR.

Give your S197 Mustang a more aggressive aesthetic with these Raxiom Smoked Tail Lights. Featuring a dark smoked lens and black housing, these units replace the factory assemblies with a custom look that maintains original equipment fitment and weather-sealing standards. These taillights are engineered to factory specifications for a direct installation into the factory mounting points.

• OE-Grade Construction: Manufactured from high-quality materials to ensure durability and long-term resistance to UV fading.
• Direct Fit: Designed to the original factory dimensions for a precise fit on all 2005-2009 Mustang trims.
• Bulb Compatibility: These housings reuse your existing factory bulbs and sockets for a simplified setup. They are also compatible with Raxiom LED bulb upgrades (sold separately).
• Customizable: Fully compatible with optional sequential harness kits to provide the classic styling found on early Shelby models.
• What's Included: Sold as a complete set of two (driver and passenger side).
• Manufacturer Part Number: 49066

Fits all 2005-2009 Ford Mustang models, including Base, GT, Bullitt, Shelby GT, GT500, and GT500KR. These Raxiom Vector V2 LED Tail Lights modernize the exterior styling of the S197 platform with a sculpted design featuring three inner diffusers inspired by the sixth-generation Mustang.

Functionality is upgraded via built-in sequential turn signals that sweep from the center outward, increasing visibility and safety. The units are engineered with state-of-the-art electronics and high-intensity LEDs for consistent output. The housings are constructed from injection-molded black ABS plastic with smoked polycarbonate lenses, and each assembly is weather-sealed to prevent moisture and debris from entering the internal circuitry. These lights are DOT and SAE compliant, meeting all U.S. street-legal standards.

Installation is a straightforward plug-and-play process using basic hand tools, typically taking less than one hour. Note: This product is designed for U.S. market vehicles; use on EU or UK spec Mustangs requires wiring harness modifications.

• Manufacturer Part Number: 408588
• Housing Material: Injection-molded ABS plastic (Black)
• Lens Material: Polycarbonate (Smoked)
• Lighting Type: High-intensity LED
• Turn Signal Style: Sequential
• Compliance: DOT and SAE approved
• Installation: Direct plug-and-play wiring harness

Fits select 2011-2025 Ford Mustang, F-150, F-250/F-350 Super Duty, Ranger, and Bronco models.

Eliminate the sluggish throttle response and "dead pedal" feel common in modern drive-by-wire systems with the Raxiom Axial Series SpeedForm Throttle Response Controller. While electronic throttle bodies offer precision, the factory calibration often includes an intentional delay for fuel economy or safety. This controller modifies the signal to the throttle body, providing a snappier, more immediate response for safer merging and more engaging driving.

The SpeedForm controller features five preset modes to suit any driving condition, each with nine levels of sensitivity adjustment for a total of 45 possible settings. It connects directly to your stock throttle position sensor using OEM-style plug-and-play connectors. Because it does not modify the factory PCM, it is 100% reversible and leaves no residual codes, making it a warranty-friendly upgrade for your Ford vehicle.

• Five Driving Modes: Stock (Factory default), ECO (Fuel economy focused), Comfort/Sport (P1), Sport (P2), and Race (P3).
• Precision Tuning: Nine sensitivity levels per mode to fine-tune your pedal feel.
• Plug-and-Play: Direct installation to the pedal assembly with no cutting or splicing.
• Warranty Friendly: Does not flash the ECU; leaves no trace when removed.
• Manufacturer Part Number: 407056

Fits all 2010-2012 Ford Mustang models, including Base, Boss 302, GT, and Shelby GT500. Raxiom Vector V2 LED Tail Lights modernize the rear profile of your S197 Mustang with a sculpted design inspired by the sixth-generation pony car. These lights feature three white inner diffusers set against gloss black housings and clear lenses for a striking, high-contrast aesthetic.

Equipped with high-intensity LEDs, these units provide significantly brighter illumination than factory incandescent bulbs. The Vector V2 includes a sequential turn signal function that sweeps from the center outward, though please note this function is reserved for turn signals and does not apply to brake or hazard lights. Built for durability, each light is weather-sealed to protect internal electronics and is DOT compliant for street use.

• Sequential Function: Integrated turn signals sequence from the center out.
• Modern Styling: Gloss black housings with three white inner diffusers and clear outer lenses.
• Plug-and-Play: Direct fit replacement using factory mounting points and pre-attached wiring harnesses.
• Technical Specifications: DOT compliant; integrated reverse lights; high-intensity LED technology.
• Note: Designed for US-spec Mustangs; EU/UK models require wiring modifications.
• Manufacturer Part Number: 405839

Fits select 2015-2023 Ford Mustang models, including EcoBoost, GT, V6, Mach 1, Bullitt, and Shelby GT350/GT500.

Replace the dated factory incandescent bulbs and the unappealing "hot spot" lighting pattern with the modern look of Raxiom Axial Series Smoked Rear LED Side Marker Lights. These units feature a continuous, high-output red LED strip that provides significantly better visibility and a sharper aesthetic than OE components.

Built for durability on and off the track, these markers are manufactured from injection-molded ABS plastic. The housings are weather-sealed to protect the internal state-of-the-art electronics from moisture, dirt, and road debris. The smoked lenses offer a stealthy, aggressive appearance while maintaining high light transmission for safety.

Installation is a straightforward plug-and-play process. These markers use factory-style connectors that plug directly into your Mustang's existing wiring harness, requiring absolutely no cutting, splicing, or additional resistors. Simply pop out the factory units and snap the Axial Series replacements into place.

• Includes Driver and Passenger Side Rear Markers
• High-Output Red LED Strip Technology
• Smoked Polycarbonate Lenses with Durable ABS Housings
• Direct OE Replacement with Plug-and-Play Connectors
• Weather-Sealed for Long-Term Reliability
• Manufacturer Part Number: 404231

Fits 2015-2017 Ford Mustang EcoBoost and GT models equipped with factory fog lights (US Market only).

Upgrade your S550 Mustang’s front-end aesthetics and cooling efficiency with Raxiom LED Halo Fog Lights. These units replace the factory fog lights with a modern halo design that delivers a bright white output. Beyond styling, these lights feature a functional honeycomb mesh center with integrated air ducts. This design increases airflow under the vehicle and provides a direct path for custom brake cooling ducting, helping to manage thermal loads during spirited driving.

Built to OEM standards, these lights feature durable black plastic housings and textured opaque lenses. To ensure long-term reliability in all weather conditions, each housing is epoxy-sealed to protect the internal LED electronics from moisture and debris. Installation is a straightforward bolt-on process that utilizes the factory mounting brackets and hardware. These units are plug-and-play, connecting directly to the OEM wiring harness with the included extensions.

• Bright white LED halo rings for modern exterior styling
• Integrated air ducts with honeycomb mesh for improved cooling capacity
• Durable black plastic housings with weather-resistant epoxy sealing
• Textured opaque lenses for clean light diffusion
• Direct-fit replacement for factory fog light units
• Includes wiring harness extensions and installation hardware
• Manufacturer Part Number: 398032

Fits all 2015-2023 Ford Mustang models, including EcoBoost, GT, V6, Bullitt, Mach 1, and Shelby GT350/GT500.

Eliminate the dated look of factory halogen rear side markers and their unsightly "hot spots." Raxiom Axial Series Smoked LED Side Markers modernize your Mustang's rear quarters with a sharp, continuous red LED focal strip. These housings feature a smoked lens that blends seamlessly into the body lines when off, providing a aggressive, custom aesthetic while remaining significantly brighter than the original equipment when activated.

Engineered for long-term durability, these units utilize high-output SMD LEDs controlled by a constant-current driver and feature embedded transient voltage suppression to protect against electrical spikes. The smoked optical reflectors are ultrasonically welded to ensure a completely weather-sealed housing, preventing moisture and debris from entering. Installation is a straightforward 100% plug-and-play process, utilizing the factory wiring harness with no cutting, splicing, or load resistors required.

• Powerful Red SMD LED focal strips for a laser-like lighting effect
• Modern smoked lens and optical reflector design
• Weather-sealed housing via ultrasonic welding
• Integrated transient voltage suppression and constant-current driver
• Direct plug-and-play replacement of factory markers
• Includes both driver and passenger side rear markers
• Manufacturer Part Number: 390265

Fits all 1996-1998 Ford Mustang models, including Base, GT, and SVT Cobra (SN95).

Update your SN95's rear-end styling with Raxiom Icon LED Tail Lights. These assemblies feature the distinctive triple-ring design inspired by late-model Mustangs, integrating high-intensity LED technology for both the running light rings and the reverse lights. The black housings and smoked lenses provide an aggressive look while improving visibility over standard incandescent bulbs, ensuring your vehicle is clearly seen at night.

Designed for a direct-fit installation, these tail lights feature a plug-in connector that inserts into your stock wiring harness. They are fully compatible with Raxiom sequential tail light harnesses and can be paired with Raxiom modified turn signal flashers to achieve a modern muscle car sequence speed. These assemblies meet or exceed U.S. Department of Transportation (DOT) guidelines and are fully compliant under compliance# QR1300191.

• Includes driver and passenger side tail light assemblies
• MPN: 389876
• DOT Compliance#: QR1300191
• Finish: Black housing with smoked lens
• Technology: High-intensity LED running and reverse rings
• Compatible with factory wiring and Raxiom sequential harnesses
• Installation: Plug-and-play connector
• Note: Reuses factory bulbs; optional LED bulb upgrades available separately

Fits 2005-2009 Ford Mustang Base, GT, Bullitt, and Shelby (GT, GT500, GT500KR) models.

Bring the iconic 1968-1970 Shelby aesthetic to your S197 with the Raxiom Sequential Tail Light Kit (MPN 11044). This kit transforms your factory tail lights into a dynamic sequential setup. When the turn signals or hazards are activated, the light segments sequence from the center out and repeat. For braking, the lights sequence once before remaining solid to maintain factory safety standards and visibility.

Engineered for a straightforward installation, this kit is a direct-fit replacement for the factory wiring harness. It features two inline harnesses equipped with state-of-the-art electronic components and OE-style connectors, allowing for a true plug-and-play upgrade without the need for wire splicing or permanent modifications.

• Direct plug-and-play replacement for factory wiring harnesses
• Authentic Shelby-style sequential turn signal and hazard operation
• Single-sequence brake light function with solid illumination
• Includes driver and passenger side inline harness units
• Manufacturer Part Number: 11044

Note: These sequential harnesses are designed for use with factory incandescent housings and are not compatible with aftermarket LED replacement tail lights.

Fits 1999-2004 Ford Mustang Base and GT, and 2003-2004 Mach 1 models.

The Raxiom Icon LED Tail Lights (MPN 100807) bring the modern signature styling of later-model Mustangs to your 1999-2004 New Edge pony. These units feature integrated high-intensity LED technology for both the reverse lights and the distinct outer running light rings, providing a high-tech appearance while significantly increasing visibility over factory incandescent bulbs. Designed for a direct-fit installation, these tail lights use a simple plug-in connector that inserts into the stock wiring or Raxiom sequential harnesses.

The aggressive smoked lenses and black housings provide a custom look that meets or exceeds strict U.S. Department of Transportation guidelines. These units are designed to reuse your factory incandescent bulbs for turn/brake signals, though they can be upgraded to LED bulbs (which requires a modified flasher for proper operation).

• Modern LED running light rings and integrated LED reverse lights
• Aggressive smoked lenses with stealthy black housings
• Simple plug-and-play installation into factory harness
• DOT compliant under compliance# QR1300191
• Compatible with Raxiom sequential tail light harnesses
• Sold as a set of two (driver and passenger side)
• Manufacturer Part Number: 100807

Fits 2009-2014 Ford F-150 Lariat, XL, and XLT models without factory HID headlights.

Upgrade the lighting performance and front-end styling of your truck with Raxiom G4 Series Projector Headlights. These units are designed to replace factory reflector housings with modern projector technology, providing a more focused beam pattern for enhanced brightness and improved nighttime visibility. Each assembly features sleek black housings with clear lenses, integrating dual LED light bars and LED accent lighting for a contemporary, aggressive look.

Constructed to meet rigorous standards, these headlights are both DOT and SAE compliant for street-legal use. They are engineered as a direct replacement for 2009-2014 F-150 models originally equipped with halogen headlights; please note they are not compatible with models featuring factory HID systems.

• G4 Series projector technology for a focused beam
• Dual LED light bars and integrated LED accents
• Durable black housings with high-clarity lenses
• Enhanced visibility over OEM reflector units
• DOT and SAE compliant for safety and legality
• Manufacturer Part Number: T544003

Fits 2015-2020 Ford F-150 (Excluding Raptor) models including XL, XLT, Lariat, King Ranch, and Platinum.

Improve nighttime visibility and safety during inclement weather by upgrading your factory lighting with the Raxiom Axial Series LED Fog Light Kit. These direct-fit replacements feature high-output LED technology, producing a bright, clear beam that far outperforms original incandescent bulbs. Engineered for durability, these lights are constructed with die-cast aluminum housings and impact-resistant polycarbonate lenses, finished in a textured black powder coat for superior corrosion resistance and a rugged appearance.

Designed for a seamless integration, these fog lights are a true plug-and-play upgrade. They utilize the factory mounting points and connect directly to your F-150's original wiring harness without the need for cutting, splicing, or complex modifications. Installation can typically be completed in under an hour using standard hand tools.

• High-Performance Lighting: Super bright LED technology for enhanced peripheral illumination.
• Rugged Build: Die-cast aluminum housings with clear polycarbonate lenses.
• Weather Protection: IP67 waterproof rating for reliable performance in all conditions.
• Street Legal: DOT and SAE compliant to meet strict safety standards.
• Direct Fit: Includes both driver and passenger side lights (Pair).
• MPN: T541673

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 models including Custom, Trail Boss, LT, SLT, and Denali trims.

Upgrade the exterior styling and visibility of your truck with Raxiom Axial Series LED Mirror Lights. These smoked-lens marker lights are engineered to replace the weak factory incandescent bulbs with high-output amber SMD LED strips. Featuring four distinct LED strips, these housings eliminate the unsightly central "hot spot" found in OEM lighting, providing a clean, uniform bar of light across the mirror housing.

Built for durability in harsh environments, these lights feature injection-molded ABS plastic housings that are fully weather-sealed to protect the internal circuitry from moisture, dust, and debris. The smoked lenses offer a stealthy look when the vehicle is off without compromising light output during the day or night. Installation is a straightforward plug-and-play process; these units snap directly into the factory mounting points and utilize the original wiring harness with no cutting, splicing, or resistors required.

• Manufacturer Part Number: S136548
• High-output amber SMD LED strip lighting
• Durable injection-molded ABS plastic housings
• Direct plug-and-play installation into factory mirror mounts
• Weather-sealed construction for long-term reliability
• Includes both driver and passenger side marker lights

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited models.

Replace dated factory halogen lamps with the Raxiom Axial Series LED Projector Headlights (MPN J132813). These headlights utilize a projector lens design to produce a bright, focused beam pattern, significantly improving nighttime visibility and safety compared to OEM reflector housings. The integrated LED halo and accent lighting provide a modern look while increasing vehicle conspicuity during the day.

Constructed from OEM-grade materials, these headlights feature durable black plastic housings and impact-resistant, crystal-clear polycarbonate lenses. Each unit is weather-sealed to protect the internal electronics from moisture, dust, and trail debris. Installation is a direct bolt-on, plug-and-play process that requires no cutting or splicing; simply remove the front grille to access the factory mounting points.

• Direct-fit for 2007-2018 Jeep Wrangler JK/JKU
• LED projector beam for superior light distribution and cutoff
• Integrated LED halo and accent lighting for modern styling
• Durable black housing with clear polycarbonate lens
• Weather-sealed construction for environmental protection
• Simple plug-and-play installation; no modifications required
• Includes driver and passenger side assemblies
• Manufacturer Part Number: J132813

Fits select 2007-2025 Jeep Wrangler JK and JL models, including Rubicon, Sahara, Sport, 4xe, and Unlimited variants.

Raxiom Axial Series LED Fog Lights provide a significant visibility upgrade over factory incandescent lighting, utilizing high-intensity white LEDs to cut through dust, rain, and dark trails. These 4-inch round fog lights feature integrated dual-bar DRL (Daytime Running Light) accents, offering a modern aesthetic while improving vehicle presence during the day. Engineered for durability, the units feature rugged aluminum housings and toughened glass lenses, epoxy-sealed to earn an IP65 waterproof rating.

Installation is straightforward, as Raxiom includes wiring harness adapters for a direct plug-and-play fit on JK models. These lights are also compatible with JL models equipped with factory LED fog lights and many aftermarket bumpers. While the fog light function is plug-and-play for JK, the DRL accent bars require splicing into the side marker or running light circuit for power.

• High-intensity white LED output for improved peripheral visibility
• Integrated dual DRL accent bars for enhanced styling
• Impact-resistant toughened glass lenses
• IP65-rated waterproof and dustproof aluminum housing
• DOT and SAE compliant for street-legal use
• Estimated 50,000-hour LED lifespan
• Includes wiring harness adapters for JK installation
• Manufacturer Part Number: J130814

Fits 1997-2018 Jeep Wrangler TJ, JK, and JK Unlimited.

Raxiom Axial Series 7-inch LED Daymaker Headlights provide a significant visibility upgrade for both off-road trails and daily driving. These headlights utilize high-performance CREE LED lamps to produce between 3200 and 4500 raw lumens with a crisp 6000K color temperature. To ensure stable operation, each unit features a built-in EMC function that prevents flickering and electrical interference without the need for additional external decoders.

Built for the elements, these lights are housed in durable chrome-finished aluminum and carry an IP67 waterproof, shockproof, and dustproof rating. This design protects the internal electronics from moisture and debris during heavy rain or water crossings. The pair is designed for a straightforward plug-and-play installation, fitting directly into the factory 7-inch round mounting points without requiring cutting or wiring modifications.

• Raw Lumens: 3200-4500 lm
• Color Temperature: 6000K
• LED Type: High-Performance CREE
• Voltage: DC 9-30V
• Wattage: 45W
• Housing Material: Chrome Aluminum
• Lens: Durable Clear Lens
• Protection Rating: IP67 Waterproof, Shockproof, and Dustproof
• Installation: Plug-and-Play (approx. 1 hour)
• Included: Pair of Headlights and Anti-Flicker Boxes
• Manufacturer Part Number: J108043

Fits select 1997-2018 Jeep Wrangler TJ, JK, and Unlimited models originally equipped with factory halogen headlights.

Improve nighttime visibility and trail safety with the Raxiom Axial Series 7-Inch LED Daymaker Headlights. These high-performance units replace dim factory halogen lamps with 45-watt CREE LEDs, producing up to 4500 raw lumens in a crisp 6000K daylight white color temperature. Engineered for rugged environments, they feature durable black aluminum housings and clear lenses that are IP67-rated against water, dust, and vibration.

Each light includes a built-in EMC (Electromagnetic Compatibility) function to prevent flickering and electrical interference, eliminating the need for external decoders. The plug-and-play design ensures a straightforward installation into factory mounting points in approximately one hour without the need for cutting or wiring modifications.

• Manufacturer Part Number: J108042
• Light Output: 3200 - 4500 Raw Lumens
• Color Temperature: 6000K
• Power: 45 Watts; DC 9-30V
• Lifespan: 50,000+ Hours
• Protection Rating: IP67 Waterproof, Shockproof, and Dustproof
• Construction: Die-cast Aluminum Housing
• Fitment Note: Vehicles factory-equipped with LED headlights require factory halogen headlight buckets for installation (not included)

Fits all 1997-2018 Jeep Wrangler TJ, JK, and JK Unlimited models.

Replace dim factory halogen lamps with Raxiom Axial Series LED Headlights (MPN J108039) for superior nighttime visibility and a modern aesthetic. These 7-inch round headlights utilize high-intensity CREE LEDs to deliver a crisp 5600K white light. The specialized optics provide a longer beam distance and reduced glare compared to OE equipment, ensuring safer navigation on and off the trail. Each unit is housed in a rugged, die-cast black aluminum housing with a clear lens, engineered to withstand the vibrations and impacts common to off-road use.

Installation is a direct plug-and-play process utilizing factory mounting points and connectors, typically requiring only 30 minutes. Please note: These lights are intended for Jeeps originally equipped with factory halogen headlights. Models originally equipped with factory LED headlights will require factory halogen-style headlight buckets (not included) for installation.

• Dual-function high and low beam CREE LEDs
• 40 Watts of power output per headlight
• 5600K color temperature for clean, white illumination
• Durable black-finished aluminum housing with IP67 waterproof rating
• Rated for a lifespan of up to 15,000 hours
• Direct plug-and-play installation for halogen-equipped models

Fits select 1997-2018 Jeep Wrangler TJ and JK models originally equipped with factory halogen headlights.

Improve your nighttime visibility and off-road safety with the Raxiom Axial LED Halo Headlights. These 7-inch round units replace underperforming factory halogen lamps with high-output 6000K cool white LED technology. The integrated dual-function halo serves as both a crisp white Daytime Running Light (DRL) and a high-visibility amber turn signal indicator, modernizing your Jeep's front-end aesthetics.

Engineered for the trail, these headlights feature a rugged black housing protected by a high-impact clear polycarbonate lens. The internal electronics are epoxy-sealed to guard against moisture, dust, and vibration, ensuring a lifespan of up to 50,000 hours. This kit includes the H4 to H13 wiring adapters necessary for 2007-2018 JK models, though additional wiring is required for the halo functionality.

• Output: 5400 Lumens (High Beam) / 3600 Lumens (Low Beam)
• Color Temperature: 6000K Cool White
• Certifications: DOT and SAE compliant for street use
• Lifespan: Up to 50,000 hours
• Power: 60% lower consumption than standard halogen bulbs
• Hardware: Includes H4-H13 wiring harness adapters
• Manufacturer Part Number: J108037

Note: Models originally equipped with factory LED headlights require factory halogen-style headlight buckets for installation. Splicing into the vehicle's electrical system is required to activate the DRL and Amber Signal halo functions.

Fits 2008-2014 Dodge Challenger models including SE, SXT, R/T, and SRT8.

Update your vehicle's rear aesthetics with Raxiom Smoked LED Tail Lights. These assemblies feature a modern, race track-inspired running light design and integrated sequential turn signals, providing a significant visual upgrade over factory units. Beyond the styling, the high-intensity diffused LEDs improve visibility for following drivers during braking and signaling maneuvers.

Engineered for long-term durability, these tail lights (MPN: CH3762) are constructed with rugged black ABS plastic housings and smoked polycarbonate lenses. Each assembly is weather-sealed to protect the internal electronics from moisture, dust, and road debris. These lights utilize red diffused LEDs for running, brake, and turn functions, while high-output white LEDs provide clear illumination for reverse signaling.

• Sequential turn signal indicators for a modern lighting signature
• Race track-inspired diffused LED running light design
• Durable smoked polycarbonate lenses and black ABS housings
• Weather-sealed construction protects internal components
• DOT and SAE compliant for street legality
• Direct plug-and-play installation into factory mounting points
• No cutting or wiring modifications required; ~45-minute install time
• Manufacturer Part Number: CH3762

Fits 2005-2009 Ford Mustang Base, Bullitt, GT, and Shelby (GT, GT500, GT500KR).

Update your S197 Mustang’s rear lighting with Raxiom Gen5 LED Tail Lights. These units replace the factory incandescent bulbs with high-intensity LED clusters that offer faster illumination and increased brightness for improved safety. Featuring an integrated sequential function, the turn signals and hazard lights pulse from the center outward. When the brakes are applied, the lights sequence once and remain solid to ensure clear signaling to following drivers.

Constructed with state-of-the-art electronic components, these tail lights feature a black housing and aggressively smoked lenses. The installation is a direct swap using a plug-in connector that mates to the factory wiring harness. These lights are DOT compliant under compliance number QR1200176, ensuring they meet federal safety standards for US-spec vehicles.

• Manufacturer Part Number: 49169
• Modern LED technology with built-in sequential turn signals
• Aggressive smoked lens with stealthy black housing
• Direct plug-and-play installation into factory harness
• DOT Compliant under QR1200176
• Sold as a set of two (driver and passenger side)
• Note: Not compatible with aftermarket tail light trim; fits US-spec models only without wiring modification

Fits select 1996-2004 Ford Mustang models, including Base, GT, Mach 1, and 1997 SVT Cobra (Excludes 1999-2001 Cobra).

Bring the iconic 1960s Shelby aesthetic to your SN95 or New Edge Mustang with the Raxiom Plug-In Sequential Tail Light Kit. This kit (MPN 49143) updates your rear lighting signature with a modern sequencing pattern while maintaining a classic muscle car look. When the turn signal or hazard lights are activated, the lights sequence from the center out. During braking, the segments sequence once and then remain fully illuminated for maximum safety and visibility.

Designed as a true plug-and-play solution, this kit replaces your factory wiring harness using OE-style connectors. Installation is straightforward and requires no cutting or splicing; simply reuse your factory incandescent brake and reverse bulbs in the new sockets. This kit is built using high-grade electronic components to ensure long-term reliability under varied driving conditions.

• Retro Sequencing Pattern: Triple-segment sequence from the center-out for signals and hazards.
• OE-Style Integration: Direct plug-in replacement for the factory tail light wiring harness.
• Reliable Performance: Assembled with state-of-the-art electronic components for consistent operation.
• Note: Not compatible with LED replacement bulbs or 1999-2001 SVT Cobra models equipped with amber turn signals.

Fits 2005-2009 Ford Mustang Base, Bullitt, and GT models (excludes GT500).

Update the front-end styling and lighting performance of your S197 with these Raxiom LED Halo Projector Headlights. Designed as a direct replacement for factory halogen units, these headlights feature a modern one-piece design with black housings and smoked lenses for an aggressive, custom look. The integrated projector lenses produce a focused, bright beam pattern for improved night visibility compared to standard reflector housings.

These headlights come equipped with high-efficiency LED halos and accent lighting, giving your Mustang a distinct exotic appearance. The set is fully DOT-compliant for street use and includes pre-installed bulbs for a straightforward installation process.

• Modern projector technology for a sharp, focused beam
• Signature LED halo and accent lighting
• Aggressive black housings with smoked lenses
• Low Beam: H7 bulb (included)
• High Beam: H1 bulb (included)
• DOT Compliant under compliance #QR1200197
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 49128

Note: Not intended for use with vehicles equipped with factory Daytime Running Lights (DRL) or aftermarket HID kits. Does not fit GT500 models.