Use the Rugged Ridge Snatch Block Pulley to double your Winch capacity! This durable 8 in. long pulley is constructed from 3/16 in. cold rolled steel and is suitable for use up to 20,000lbs. For use with Winch cables up to 3/8 in diameter. The pulley can be used to double the capacity for your Winch, or to reduce the strain on the Winch motor and your electrical system. For recovery operations were a straight pull is not viable option, the pulley helps change the angle of your pull.

• Double The Capacity For Your Winch or Reduce Strain
• 20000Lb Working Load Limit
• Up to 1/2 Cable or Rope
• Cold Rolled Steel
• 9 in. Pulley

This pair of black D-shackles from Rugged Ridge have a 1- in. pin and a 13,500 pound Working Load Limit (WLL).

• 13500Lb Pull Capacity
• Galvanized Steel
• 7/8 in.
• Black
• Pair

This pair of black 3/4- in. D-shackles from Rugged Ridge are rated to 9,500 lbs. and are the shackles youll need for recovering stuck Jeeps.

• 9500Lb Pull Capacity
• Galvanized Steel
• 3/4 in.
• Black
• Pair

Rugged Ridge LED License Plate Bolts easily convert your current license plate conventional bulbs into highly efficient, super-cool LED's that are guaranteed to get noticed! Each plate bolt houses two LED's that emit warm 3300K white light that far outshines the factory lights. Each kit includes two license plate bolts, wiring pigtails, connectors, butt splices, hardware and instructions.

Optimize your off-roading adventure with the best lighting solutions on the market. Designed to accommodate a variety of auxiliary off-road lights, Rugged Ridge designed this new light mount to allow you to place lights in positions that yield the most visibility on the trail. This dual A-pillar light mount is constructed from heavy-duty steel and is easily attached to the lower windshield mount using existing factory mounting holes. No drilling or cutting is required for installation.

• Machined Sealing Surface Allows Gaskets or RTV Sealant
• A356-T6 Cast Aluminum for Strong Impact Resistance
• Matte Black Powdercoated

This Part Fits:

The Ultimate Light Bar for your Wrangler! This exciting new design has been created to give the durable look of a five tab light bar with features found nowhere else. Through extensive testing. this heavy duty light bar incorporates a special wind deflector below the light bar to dramatically reduce whistling and buffeting of your soft top. Oversized 2 in. textured black tubing attaches to your windshield mounts with no drilling. Each Light bar has five light tabs for use with Rugged Ridge Light mount brackets and/or Rugged Ridge mirror relocation brackets. Special three piece design makes the packaging small for ease of shipping. This is truly the most advanced light bar on the market!

• Built-in Wind Deflector
• No Drilling Required
• Mounts 5 Lights
• 2 in. Tubing
• Black

This Part Fits:

This black powder-coated three piece full frame light bar from Rugged Ridge protects your windshield frame and A-pillar and features four tabs to mount auxiliary lights for better off-road lighting and trail visibility. This light bar uses pre-existing holes on your windshield so there is no need for modification, making installation easier.

• Limited 5 Year Warranty
• Mounts 4 lights
• 3 Piece
• Black

This Part Fits:

When it comes to protecting your headlights, choose the best - the Rugged Ridge ELITE. Constructed of cast aluminum and featuring a classic raw aluminum finish, the Rugged Ridge Elite Series Headlight Guard will separate your rig from the crowd. Engineered to work with factory JK headlights as well as most manufacturers aftermarket lights, its geometric design is like no other. The Rugged Ridge Elite Headlight Guards are the perfect addition to your JK's grill and install in minutes.

• Compatible w/OE And Most Aftermarket Manufacturers Headlights
• Cast Aluminum One Piece Construction
• Available in multiple finishes
• Unique Geometric Design

This Part Fits:

Protect your headlights from debris and get that off road look with a set of Rugged Ridge Euro Guards. Constructed of durable powder coated steel, These front Euro Guards are designed to last. No drilling required for installation. Each kit comes with a pair of guards to cover both sides of the vehicle. The side marker light guards are a great compliment to our front light Euro-Guards. The turn signal light guards are designed to match our Headlight Euro-Guards. They feature the same great style and construction. If you are using Truck-Lite LED headlights, you may need to get longer screws and plastic spacers to fit these correctly.

• Protects Lights From Impact
• Limited 5 Year Warranty
• Black
• Pair

This Part Fits:

Constructed of high-quality die cast aluminum alloy, the Elite Fuel Caps give today's JK owners a simple but extremely attractive way to update the look of their Jeep. Available in a wide variety of premium finishes to accent any tastes or paint scheme, these fuel caps feature a distinctive styling that the Elite line of accessories is best known for. With such cutting edge style and incomparable quality, standing out from the crowd has never been so easy. Available in your choice of Textured Black Powder Coat, Black with Brushed Accents, vibrant Red Powder Coat or Diesel Green Powder Coat.

This Part Fits:

Create a custom look in just a few minutes. This special design fits directly over the existing gas cap opening. The textured black finish complements other textured accessories. Provide added security with this locking version restricting access to the gas cap with an additional lock. They are specially treated to resist blemishes caused by gasoline or other hazardous chemicals.

• Limited 5 Year Warranty
• Easy to Install
• Textured Black
• Non Locking

This Part Fits:

This locking gas cap door from Rugged Ridge comes in a semi-gloss powder coated finish to create a custom look in just a few minutes. This special design fits directly over the existing gas cap opening. They are specially treated to resist blemishes caused by gasoline or other hazardous chemicals. These covers install over the top of your factory gas cap into existing mounting points. No drilling required.

• Limited 5 Year Warranty
• Includes Hardware
• Locking
• Black
• Steel

This Part Fits:

Create a custom look in just a few minutes. This special design fits directly over the existing gas cap opening. Available in locking and non locking versions. They are specially treated to resist blemishes caused by gasoline or other hazardous chemicals.

• Limited 5 Year Warranty
• Painted Stainless
• Includes Hardware
• Black

This Part Fits:

The Wrangler JL and Gladiator JT have set themselves apart from every Jeep that has come before, with distinctive styling and refinements at every turn. The unique shape and design of the tail lights is one of the most iconic symbols of this generation of Jeeps, and now you can preserve your tail lights while accenting what it is that makes them so special. Rugged Ridge Elite Tail Light Guards encase your light housing inside a cast aluminum shell, keeping them safe from bumps and blows. The Elite Guards ingenious 2-piece design offers protection in every direction, while accenting the lights original shape and trademark character. Cleverly concealed hardware makes the Elite Tail Light Guards appear to be part of the original design, and not an aftermarket afterthought. Each guard is finished with a premium satin black powder coat for an OE quality appearance and a long life. Works with OE LED tail lights only and works with factory blind spot monitoring systems. US Patent no. US10059251.

• Elite Tail Light Guards

This Part Fits:

Protect your taillights from debris and get that off road look with a set of Rugged Ridge tail light euro guards. Constructed of durable powder coated steel, these textured black taillight euro guards are designed to last! No drilling required for installation.

• Protect Lights From Flying Debris
• Limited 5 Year Warranty
• Textured Black
• Pair

This Part Fits:

Protect and upgrade the look of your rear euro guards Jeep with a set of Rugged Ridge Euro Taillight Guards. Each Rear Euro Taillight Guard is easy to install with no drilling required. Rubber inserts around the mounting screws keep the metal Euro Guard off the taillight, preventing scratching and rattles.

• Limited 5 Year Warranty
• Protects Tail Lights
• No Drilling Required
• Black

This Part Fits:

This pair of tailgate hinges comes with a semi-gloss black powder-coated finish for a sleek look and is a direct replacement with no drilling required. Includes all necessary hardware.

• Limited 5 Year Warranty
• Includes Hardware
• Direct Fit
• OE Style
• Black

This Part Fits:

Rugged Ridge created these All Terrain Door Entry Guards to prevent the unsightly scuffs and scratches that happen just by climbing in and out of your Jeep. Defending those unprotected door sills couldn't be any easier. When you install these Door Entry Guards, you'll be preserving your precious paint and adding a cool accent at the same time. Constructed of a super-tough thermoplastic, each guard features an inlaid all-terrain tread pattern so they look just as great as they work- whether the doors are on or off. And installation is a breeze with the provided automotive-grade adhesive foam tape. Sets are available for both 2 and 4-Door JL models. Patent No. D627,285

• Installs in Minutes With Automotive Grade Acrylic Adhesive Tape
• Engineered to Precisely Contour to The Rail for an Exact Fit
• Designed to Be Longer and Wider Resulting in More Coverage
• Designed to Prevent The Accelerated Wear and Tear
• Black Injection Molded Thermoplastic Material

This Part Fits:

Rugged Ridge All-Terrain Door Entry Guards are molded of durable, impact-resistant injection molded ABS plastic and feature our signature deep tread design molded into the guard for protection that doesn't forget the importance of looking good. Our patented design is longer and wider than most other entry guards for greater coverage with body-hugging contour for a snug fitment. All-Terrain Door Entry Guards install easily with the included automotive-grade adhesive and are sold in PAIRS.

• Installs in Minutes With Automotive Grade Acrylic Adhesive Tape
• Engineered to Precisely Contour to The Rail for an Exact Fit
• Designed to Be Longer and Wider Resulting in More Coverage
• Designed to Prevent The Accelerated Wear and Tear
• Black Injection Molded Thermoplastic Material

This Part Fits:

Your lower door sills can easily be scuffed by daily entry and exit from your Jeep. Designed to prevent the wear and tear, common to Jeep door sill areas, or cover up existing damage. Rugged Ridge created these All Terrain entry guards to prevent unsightly scuffs and scratches. The entry guards are constructed of tough thermoplastic and install in minutes with strong automotive-grade adhesive foam tape. Patent No. D627,285

• Installs in Minutes With Automotive Grade Acrylic Adhesive Tape
• Engineered to Precisely Contour to The Rail for an Exact Fit
• Designed to Be Longer and Wider Resulting in More Coverage
• Designed to Prevent The Accelerated Wear and Tear
• Black Injection Molded Thermoplastic Material

This Part Fits:

Your lower door sills can easily be scuffed by daily entry and exit from your Jeep. Designed to prevent the wear and tear, common to Jeep door sill areas, or cover up existing damage. Rugged Ridge created these All Terrain entry guards to prevent unsightly scuffs and scratches. The entry guards are constructed of tough thermoplastic and install in minutes with strong automotive-grade adhesive foam tape. Patent No. D627,285

• Installs in Minutes With Automotive Grade Acrylic Adhesive Tape
• Engineered to Precisely Contour to The Rail for an Exact Fit
• Designed to Be Longer and Wider Resulting in More Coverage
• Designed to Prevent The Accelerated Wear and Tear
• Black Injection Molded Thermoplastic Material

This Part Fits:

This pair of durable steel door entry guards from Rugged Ridge has a semi-gloss black powder-coated finish and is designed to protect your door threshold from damage while enhancing the overall look of your Jeep. Attaches with automotive grade double sided tape.

• Protects Door Threshold From Damage
• Automotive Grade Double Sided Tape
• Limited 5 Year Warranty
• 2 Piece Kit
• Black

This Part Fits:

Outfitting a trail rig can add greater strain to the electrical system. Adding on a Winch, air compressor, fog lights, driving lights, a spotlight, electric fuel pump, and a stereo amp can really tax the battery. A great way to combat that strain is to install dual batteries. This is especially true when using a Winch, which can draw big amps for an extended period. These kits are designed to mount two batteries in place of the factory single battery location. The trays and brackets feature a black powder coated finish. These are mounting kits only and do not include any wiring. A suggested wiring diagram is included. 70- 95 CJ and Wrangler kits place the batteries side-by side and may be used with lead acid or cylindrical style sealed gel cell batteries. 97-06 TJ Wrangler its stack the batteries and are for use with cylindrical-style sealed, gel cell batteries only due to the battery mounting direction.

• Can Use Lead Acid or Gel Cell Batteries
• Suggested Wiring Diagram Included
• Fits In Factory Battery Location
• Limited 5 Year Warranty
• Black Powder Coated

This Part Fits:

Outfitting a trail rig can add greater strain to the electrical system. Adding on a Winch, air compressor, fog lights, driving lights, a spotlight, electric fuel pump, and a stereo amp can really tax the battery. A great way to combat that strain is to install dual batteries. This is especially true when using a Winch, which can draw big amps for an extended period. These kits are designed to mount two batteries in place of the factory single battery location. The trays and brackets feature a black powder coated finish. These are mounting kits only and do not include any wiring. A suggested wiring diagram is included. 70- 95 CJ and Wrangler kits place the batteries side-by side and may be used with lead acid or cylindrical style sealed gel cell batteries. 97-06 TJ Wrangler its stack the batteries and are for use with cylindrical-style sealed, gel cell batteries only due to the battery mounting direction.

• Mount Two Batteries in Place of Factory Single Battery
• Includes Wiring Diagram
• Limited 5 Year Warranty
• Black Powder Coated

This Part Fits:

Outfitting a trail rig can add greater strain to the electrical system. Adding on a Winch, air compressor, fog lights, driving lights, a spotlight, electric fuel pump, and a stereo amp can really tax the battery. A great way to combat that strain is to install dual batteries. This is especially true when using a Winch, which can draw big amps for an extended period. These kits are designed to mount two batteries in place of the factory single battery location. The trays and brackets feature a black powder coated finish. These are mounting kits only and do not include any wiring. A suggested wiring diagram is included. 70- 95 CJ and Wrangler kits place the batteries side-by side and may be used with lead acid or cylindrical style sealed gel cell batteries. 97-06 TJ Wrangler its stack the batteries and are for use with cylindrical-style sealed, gel cell batteries only due to the battery mounting direction.

• Can Use Lead Acid or Gel Cell Batteries
• Suggested Wiring Diagram Included
• Fits In Factory Battery Location
• Limited 5 Year Warranty
• Black Powder Coated

This Part Fits:

Outfitting a trail rig can add greater strain to the electrical system. Adding on a Winch, air compressor, fog lights, driving lights, a spotlight, electric fuel pump, and a stereo amp can really tax the battery. A great way to combat that strain is to install dual batteries. This is especially true when using a Winch, which can draw big amps for an extended period. These kits are designed to mount two batteries in place of the factory single battery location. The trays and brackets feature a black powder coated finish. These are mounting kits only and do not include any wiring. A suggested wiring diagram is included. 70- 95 CJ and Wrangler kits place the batteries side-by side and may be used with lead acid or cylindrical style sealed gel cell batteries. 97-06 TJ Wrangler its stack the batteries and are for use with cylindrical-style sealed, gel cell batteries only due to the battery mounting direction.

• Can Use Lead Acid or Gel Cell Batteries
• Suggested Wiring Diagram Included
• Fits In Factory Battery Location
• Limited 5 Year Warranty
• Black Powder Coated

This Part Fits:

This black painted battery tray kit includes the battery tray, brace, and clamp. Each accessory in the kit is powder coated in a semi-gloss finish to protect your investment against the elements. Comes with complete hardware to ensure a trouble free installation.

• Limited 5 Year Warranty
• Direct Fit
• OE Style
• Black

This Part Fits:

Protect your front grille from bugs and debris with this durable black radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching. Installation requires some drilling.

• Limited 5 Year Warranty
• Mounts externally
• Includes Hardware
• Black

This Part Fits:

Made from either 3/8 in. cast steel or 5/16 in. stamped steel, these heavy-duty covers are designed to protect your differential and all its working parts for as long as you own your vehicle.

• Limited 5 Year Warranty
• Direct Fit
• OE Style
• Black

This Part Fits:

This four piece windshield tie down kit from Rugged Ridge secures your windshield to your hood while proving a stylish look for your Jeeps exterior. Powder-coated in a semi-gloss finish to protect your investment against the elements. Comes with complete hardware to ensure a trouble free installation.

• Secures Windshield to Hood
• Limited 5 Year Warranty
• 4 Piece Kit
• Black

This Part Fits: