Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler models.

The Rugged Ridge 3-Inch Double Tube Front Bumper provides a classic off-road aesthetic while offering functional upgrades for your Jeep's front-end protection. Constructed from heavy-duty 3-inch diameter steel tubing, this bumper features an enlarged center opening specifically designed to maximize airflow to the radiator—a critical factor during slow-speed crawling or high-ambient-temperature trail runs.

This textured black bumper includes a built-in raiser for added brush protection and comes equipped with two integrated light tabs, allowing for the seamless mounting of aftermarket off-road lighting. Unlike lower-quality alternatives, this bumper features fully welded end caps rather than plastic inserts, ensuring superior durability and resistance to moisture and trail debris.

• Tubing Diameter: 3-inch heavy-duty steel
• Finish: Textured Black powder coat
• Light Mounting: Two integrated, welded light tabs
• Construction: Fully welded end caps and center raiser
• Airflow: Enlarged center opening for optimized cooling
• Manufacturer Part Number: 11561.01
• Warranty: Limited 5-year manufacturer warranty

Fits select 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ/TJ) models.

The Rugged Ridge 3-Inch Double Tube Front Bumper (MPN: 11560.02) offers a classic off-road aesthetic while providing essential protection and utility for your Jeep. Engineered with an enlarged center opening, this bumper is designed to maintain maximum airflow to the radiator, which is critical during high-load trail sessions or hot weather driving. This variant features a sleek gloss black finish and a "without raiser" design for a streamlined profile.

• Tubing: Heavy-duty 3-inch diameter steel for superior structural rigidity
• Finish: Durable gloss black powder coat to resist corrosion and trail debris
• End Caps: Fully welded end caps prevent internal moisture buildup and provide a clean finish
• Lighting: Two integrated, welded light tabs allow for the easy addition of auxiliary off-road lighting
• Installation: Bolts to factory mounting points for a straightforward upgrade
• Warranty: Backed by a Limited 5-Year Warranty

Fits select 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler models.

The Rugged Ridge 3-inch Double Tube Front Bumper delivers a classic off-road aesthetic while providing durable front-end protection. Constructed from heavy-duty 3-inch diameter steel tubing, this bumper features an integrated hoop (raiser) to enhance the vehicle's profile and provide additional mounting points. Unlike bumpers that utilize plastic end caps, Rugged Ridge bumpers feature fully welded end caps that are ground smooth before the gloss black finish is applied, ensuring a seamless look and superior resistance to corrosion.

The design includes an enlarged center opening to maintain maximum airflow to the radiator, supporting optimal engine cooling during trail use. For simplified accessory installation, two welded light tabs are included for mounting auxiliary off-road lighting. This bumper is engineered for a direct fit on select CJ and Wrangler chassis, utilizing factory mounting locations where applicable.

• 3-inch diameter steel tube construction
• Integrated hoop/raiser for added styling and protection
• Two welded light tabs for auxiliary lighting
• Fully welded end caps for enhanced durability
• Gloss black powder-coated finish
• Manufacturer Part Number: 11560.01
• Limited 5-year warranty

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT (including 4xe, Rubicon, and Mojave models).

Transform your front-end protection with the Rugged Ridge Venator Front Bumper Stubby Ends. Designed to complement the Venator bumper system, these stubby ends provide a narrow, high-clearance profile ideal for boulder-scaling and technical off-roading. Rather than using traditional plate steel, the Venator series features muscular stamped steel construction with sculpted contours and sweeping arches for a modern, integrated aesthetic.

These stubby ends are engineered for easy bolt-on installation and are designed to integrate seamlessly with your vehicle's existing equipment. The octagonal pockets are specifically sized to accept factory JL and JT fog lights, maintaining OE functionality while upgrading your vehicle's trail capabilities.

• Stamped steel construction for superior strength and weight-to-durability ratio
• Patented design with chiseled facets and sculpted contours
• Integrated 1-inch thick recovery hooks for heavy-duty extraction
• Compatible with factory JL / JT fog lights in specialized octagonal pockets
• Direct bolt-on fitment to the Venator bumper center section
• Manufacturer Part Number: 11549.64

Fits 2018-2025 Jeep Wrangler JK and JL, including Sport, Sahara, Rubicon, 4xe, and Unlimited models.

The Rugged Ridge Venator Front Bumper Overrider (MPN: 11549.55) is an essential aesthetic and functional add-on designed specifically for the Venator bumper series. Moving away from standard boxy designs, the Venator overrider features a patented form characterized by muscular contours and radical sweeping arches. This stamped steel component is engineered to complement the vehicle's natural lines rather than obstruct them, providing a finished look to your front-end assembly.

• Manufacturer Part Number: 11549.55
• Material: Heavy-duty stamped steel construction
• Design: Patented sculpted contours with radical arches
• Installation: Straightforward bolt-on application
• Compatibility: Engineered to integrate with Venator bumper systems featuring factory fog light pockets

Fits select 2018-2025 Jeep Wrangler (JK, JL, and 4xe) and 2020-2025 Jeep Gladiator (JT).

The Rugged Ridge Venator Front Bumper represents a sharp departure from traditional, boxy bumper designs. This modular system features muscular, stamped steel construction with chiseled facets and sweeping arches that complement the factory Jeep aesthetics. The narrow, boulder-scaling profile is engineered for maximum clearance during technical off-roading, providing the approach angles needed for challenging terrain.

Functionality is central to the Venator design. It features an integrated winch tray capable of supporting a 12,500 lb. winch and includes massive 1-inch thick recovery hooks for secure extraction points. The bumper is equipped with octagonal pockets designed to accept factory JL and JT fog lights, maintaining OE lighting functionality. A square-frame stylized overrider is included to provide additional front-end protection while framing the iconic slatted grille.

• Manufacturer Part Number: 11549.45
• Construction: Muscular stamped steel with a durable black finish
• Winch Capacity: Integrated tray supports up to 12,500 lbs.
• Recovery Points: Dual 1-inch thick recovery hooks
• Fog Light Fitment: Accepts factory Jeep JL and JT fog lights
• Installation: Direct bolt-on application for straightforward fitment
• Included Hardware: Built-in winch plate and stylized overrider

Fits select 2018-2025 Jeep Wrangler (JK/JL) and Gladiator models (High Altitude, Overland, Rubicon, Sahara, Sport, Willys). This stamped steel front bumper represents a sharp departure from traditional blocky designs, utilizing sculpted contours and radical arches that integrate seamlessly with your Jeep's factory aesthetics.

Constructed from muscular stamped steel for durability without excessive weight, the Rugged Ridge Venator series includes a built-in winch plate ready to accept most recovery winches. The bumper features heavy-duty, 1-inch thick recovery hooks and a protective overrider bar for additional front-end protection. For a clean, factory-style finish, the octagonal pockets are designed to accept your original JL or JT fog lights. This is a direct bolt-on installation that requires no cutting or drilling.

• Manufacturer Part Number: 11549.41
• Muscular stamped steel construction with sculpted contours
• Integrated winch tray and heavy-duty 1-inch recovery points
• Includes overrider bar for additional grille protection
• Octagonal pockets accept factory JL/JT fog lights
• Easy bolt-on installation to factory mounting points

Fits 2018-2025 Jeep Wrangler JL models including Sport, Sahara, Rubicon, 4xe, and 392.

The Rugged Ridge Arcus Rear Bumper (11549.17) provides a high-clearance, stamped-steel solution for off-road recovery and protection. Constructed from a high-strength 11-gauge steel shell with a fine-textured satin black powder coat, this bumper is engineered for durability on the trail. Its patented design features massive 1-inch thick recovery hooks that are dual cross-drilled to accept both 3/4-inch and 7/8-inch D-rings.

Integrated jack lifting points are recessed on both sides of the bumper, allowing for direct frame access when using an off-road jack. This bumper balances a bold, stubby profile with functional utility for serious off-road enthusiasts.

• Construction: Stamped 11-gauge steel shell
• Finish: Fine-textured satin black powder coat
• Recovery Points: 1-inch thick hooks, dual-drilled for 3/4-inch and 7/8-inch D-rings
• Lifting Points: Integrated off-road jack recesses for direct frame access
• Warranty: Limited 5-Year Warranty
• Manufacturer Part Number: 11549.17

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models (Rubicon, Sahara, Sport, and X trims).

The Rugged Ridge Arcus Stubby Front Bumper is engineered for off-road recovery and structural durability. This patented design features a high-strength 11-gauge steel shell built around a heavy-duty 1/4-inch thick steel winch plate. The internal winch tray is rated for most winch models up to a 12,500-lb capacity, ensuring reliable recovery performance in demanding conditions.

Equipped with massive 1-inch thick recovery hooks, the Arcus provides versatile attachment points. Each hook is dual cross-drilled to accept both 7/8-inch and 3/4-inch D-rings. For field maintenance and recovery, the bumper includes integrated recesses that allow for direct frame access when using a hi-lift jack. The design also features built-in fog light pockets that accept factory OE fog light assemblies for a seamless installation.

• Material: 11-gauge steel shell with 1/4-inch steel winch plate
• Finish: Satin black textured powder coat
• Winch Compatibility: Rated up to 12,500 lbs
• Recovery Points: Dual-drilled 1-inch thick hooks for 3/4" and 7/8" D-rings
• Lighting: Integrated OE fog light mounting pockets
• Lifting Points: Built-in hi-lift jack recesses
• Manufacturer Part Number: 11549.11

Fits select 2018-2025 Jeep Wrangler and 2021 Jeep Gladiator models.

The Rugged Ridge Arcus Front Bumper features a bold, stubby profile designed to provide maximum tire clearance and improved approach angles for technical off-roading. This complete set includes a high-strength tubular overrider that adds critical protection for your grille and radiator while providing a dedicated mounting point for trail cameras or auxiliary off-road lighting.

Expertly crafted from stamped 11-gauge steel, the Arcus bumper achieves a high-strength design without the weight of traditional plate bumpers. It comes equipped with a heavy-duty 1/4-inch thick steel winch tray ready for recovery operations. The entire assembly is finished in a durable satin black powder coat to provide superior resistance against rust, corrosion, and trail debris.

• Patented design made from high-strength stamped 11-gauge steel
• Stubby profile provides excellent clearance for oversized tires
• Includes heavy-duty 1/4-inch thick steel winch tray
• Tubular overrider offers grille protection and accessory mounting
• Finished in a durable satin black powder coat
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: 11549.05

Fits select 2018-2025 Jeep Wrangler JL models including Rubicon, Sahara, Sport, Willys, and 4xe variants.

The Rugged Ridge Arcus Front Bumper Overrider provides a functional and aggressive accent for vehicles equipped with the Arcus Front Bumper (MPN 11549.01). Beyond its rugged aesthetics, this overrider offers essential protection for the grille and radiator while serving as a secure mounting point for off-road lighting or trail cameras. Engineered for the demands of the trail, it features a low-profile, sloped design that complements the Arcus series' styling.

• Manufactured from high-strength 2.5-inch diameter tube steel for maximum durability
• Satin black powder coat finish provides superior resistance to rust and corrosion
• Simple bolt-on installation utilizing included hardware
• Designed specifically to integrate with Arcus Front Bumper (11549.01)
• Manufacturer Part Number: 11549.03

Fits all 2007-2018 Jeep Wrangler JK and JK Unlimited models, including Rubicon, Sahara, Sport, and X submodels.

The Rugged Ridge Spartan Series Front Bumper (MPN 11548.01) provides Jeep enthusiasts with a classic off-road aesthetic in a lightweight, high-strength package. This one-piece front bumper features ultra-aggressive high clearance ends (HCE) that are angled to match the profile of factory fender flares, ensuring a clean, symmetrical look with maximum tire clearance. Each bumper is constructed from high-strength plate steel using a fold-and-weld process for superior structural integrity and a precise fit.

Designed as a direct bolt-on replacement, the Spartan bumper incorporates a stand-alone winch plate that serves as the central backbone of the assembly. It comes equipped with a tubular overrider bar and heavy-duty D-shackle mounts to complete your recovery setup. For added convenience, this bumper is designed to reuse the factory JK fog lights, maintaining OE functionality while providing a rugged textured black powder coat finish that resists rust and corrosion.

• One-piece high-strength plate steel construction
• Textured black powder coat finish for corrosion resistance
• High clearance bumper ends for improved approach angles
• Integrated winch plate and D-shackle mounts (D-rings not included)
• Includes stylized tubular overrider bar
• Direct bolt-on installation using factory mounting points
• Compatible with factory Jeep JK fog lights
• Manufacturer Part Number: 11548.01
• Backed by a 5-year limited warranty

Fits all 2020-2025 Jeep Gladiator models including Mojave, Rubicon, Overland, Sport, and Willys. The Rugged Ridge Bed Mount Spare Tire Carrier solves the clearance and accessibility issues caused by oversized spare tires on the Gladiator JT. While factory spares are tucked under the bed, larger 35-inch to 40-inch tires significantly impact departure angles and are difficult to access in mud or rocky terrain.

This pre-runner-style carrier relocates your spare into the truck bed, mounting high enough to allow for hauling flat cargo like plywood underneath. Engineered for harsh off-road use, it features a sturdy frame built from 45mm diameter, 2.5mm-wall steel tubing and 5mm thick CNC-cut, brake-formed steel plate. The integrated wheel mount is fully adjustable to accommodate various wheel offsets, ensuring a secure fit for your specific wheel and tire combo.

• Fits up to a 40-inch wheel and tire combination
• Constructed from 45mm diameter (2.5mm wall) steel tubing and 5mm thick steel plate
• Satin black powder coat finish for maximum corrosion resistance
• No-drill installation using factory mounting locations for superior rigidity
• Adjustable wheel mount depth to fit different offsets
• Manufacturer Part Number: 11546.71
• Limited 5-Year Warranty

Fits 1987-2006 Jeep Wrangler (YJ and TJ) including Sport, Sahara, Rubicon, and Unlimited models.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount (MPN: 11546.62) provides the structural integrity and adjustability required for mounting oversized wheel and tire combinations. This mount lifts the mounting position and features integrated depth and tilt adjustability to accommodate large-diameter and wide tires, preventing interference with the rear bumper or bodywork. When paired with the Spartacus HD Tire Carrier Hinge Casting (P/N 11546.51 or 11546.61), this system supports up to and including 37-inch tire diameters.

Constructed from heavy-duty steel, this mount maintains the convenience of one-handed entry to the cargo area. It is designed to work with original equipment and most aftermarket rear bumpers without the need for drilling. The kit includes an adjustable third brake light bracket to ensure visibility is maintained even with larger spares installed.

• Heavy-duty steel construction for increased load capacity
• Depth and tilt adjustability for oversized wheel and tire offsets
• Supports up to 37-inch tires when used with HD hinge casting
• Includes adjustable third brake light bracket
• No-drill installation using factory mounting points
• Manufacturer Part Number: 11546.62

Fits select 1997-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models. The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting is engineered to provide the strength and stability required to mount oversized wheel and tire combinations. This heavy-duty upgrade manages the increased leverage and vibrations common in off-road environments, preventing the tailgate sag and wear associated with factory hinges.

Constructed from precision die-cast aluminum, this one-piece hinge casting offers exceptional structural integrity without the weight penalty of solid steel. The system utilizes forged steel hinge brackets and hardened steel pins to significantly increase load capacity over original equipment. The design maintains convenient one-handed access to the cargo area and is compatible with both 5x4.5 and 5x5-inch wheel bolt patterns. It installs without drilling and works with OE and most aftermarket rear bumpers.

• Manufacturer Part Number: 11546.61
• Materials: Die-cast aluminum casting with forged steel brackets and hardened steel pins
• Finish: Durable black powder coat
• Wheel Bolt Patterns: 5x4.5-inch and 5x5-inch
• Load Capacity: Supports up to 37-inch tire when used with Spartacus HD Wheel Mount (P/N 11546.52)
• Installation: Bolt-on design; no drilling required

Fits select 2018-2026 Jeep Wrangler and Wrangler Unlimited models.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount provides a robust solution for carrying oversized spares on your JL. Engineered from fully-welded heavy-duty steel, this mount distributes weight across a broad footprint to manage the increased load of tires up to 40 inches. The adjustable mounting brackets allow for angled positioning of the spare, providing better bumper clearance and easier access to the rear liftgate.

Designed for durability and utility, each mount features a satin black powder-coated finish for superior corrosion resistance. This kit includes the necessary brackets to reposition your factory backup camera and third brake light, maintaining safety and visibility. For maximum strength, it is recommended to pair this wheel mount with the Spartacus HD Hinge Casting (part number 11546.56).

• Supports up to 40-inch tires
• Heavy-duty steel construction with a satin black powder coat finish
• Vibration tested to Hybrid SAE/MIL-Spec standards
• Direct bolt-on installation with no drilling required
• Compatible with OE and all aftermarket rear bumpers
• Includes backup camera and third brake light relocation brackets
• Manufacturer Part Number: 11546.57

Fits select 2018-2025 Jeep Wrangler JL, including Unlimited, Rubicon, Sahara, Sport, and 4xe models.

The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting (MPN: 11546.56) provides the structural integrity needed to mount oversized wheel and tire combinations. Engineered to manage the amplified force and vibrations experienced during extreme off-road driving, this hinge casting replaces factory components to prevent tailgate sagging and long-term wear. The one-piece design maintains convenient one-handed access to the cargo area by rigidly linking the wheel mount to the reinforced section of the rear quarter panel.

• Precision die-cast aluminum hinge casting for maximum strength without the weight of steel.
• Forged steel hinge brackets and hardened steel pins for superior load capacity over OE hinges.
• Accommodates both 5x4.5-inch and 5x5-inch wheel bolt patterns.
• Durable black powder coat finish for corrosion resistance.
• Compatible with OE and most aftermarket rear bumpers.
• Simple no-drill installation.
• Pairs with Spartacus HD Wheel Mount (P/N 11546.52) for carrying capacity up to 37-inch tires.

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount (MPN 11546.52) is engineered to provide the structural integrity and adjustability required for oversized wheel and tire combinations. This mount lifts the mounting position of the spare to accommodate larger diameters while incorporating both depth and tilt adjustability to ensure wide tire options clear the rear bumper and sit flush against the carrier. Constructured from heavy-duty steel, it maintains the convenience of one-handed entry to the cargo area.

• Specifically designed for 2007-2018 Jeep Wrangler JK models
• Lifts mounting position and provides depth/tilt adjustability for oversized spares
• Heavy-duty steel construction for increased load capacity
• Includes adjustable third brake light bracket to maintain visibility
• Compatible with OE and most aftermarket rear bumpers
• Direct bolt-on installation with no drilling required
• Manufacturer Part Number: 11546.52
• Recommended pairing with Spartacus HD Tire Carrier Hinge Casting (P/N 11546.51) for carrying tires up to 37 inches

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (2-door and 4-door models).

The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting provides the essential structural reinforcement needed to carry oversized wheel and tire combinations. This heavy-duty hinge is precision-engineered to manage the increased leverage and vibration encountered during off-road use, preventing the tailgate fatigue and sagging common with factory hardware. The one-piece design maintains convenient one-handed access to the cargo area while rigidly linking the wheel mount to the reinforced rear quarter panel.

Constructed from precision die-cast aluminum, this hinge provides maximum strength without the weight penalty of solid steel. It features forged steel hinge brackets and hardened steel pins for a load capacity that significantly exceeds OE specifications. For maximum performance and carrying capacity for up to 37-inch tires, pair this casting with the Spartacus HD Wheel Mount (P/N 11546.52).

• Heavy-duty die-cast aluminum construction with forged steel brackets
• Hardened steel pins for superior longevity and wear resistance
• Compatible with factory and most aftermarket rear bumpers
• No-drill installation using existing factory mounting points
• Maintains one-handed entry to the cargo area
• Manufacturer Part Number: 11546.51

Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ and TJ) models. This Rugged Ridge XHD Modular Rear Bumper Tire Carrier (MPN: 11546.42) is engineered as a direct bolt-on addition for the Xtreme Heavy Duty rear bumper system. Designed for the trail, this carrier allows you to move the weight of an oversized spare off the tailgate and onto the chassis-mounted bumper.

• Fits up to a 35-inch tire diameter
• Standard 5x4.5 inch wheel bolt pattern
• Modular design for seamless integration with XHD rear bumpers
• Durable textured black powder coat finish for corrosion resistance
• Heavy-duty latch mechanism ensures a secure, rattle-free fitment
• Direct bolt-on installation with included hardware

Whether you are running an 81 Jeep Scrambler or a 2006 Wrangler Rubicon, this tire carrier provides the structural integrity needed to support larger wheel and tire combinations without stressing your factory hinges.

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited.

Upgrading to oversized tires often causes the spare to block the factory center high-mount stop light (CHMSL). The Rugged Ridge Third Brake Light Extension Kit solves this clearance issue by elevating the factory light assembly. This adjustable spacer allows your third brake light to be clearly seen over tires ranging from 33 inches up to 42 inches in diameter while retaining the use of your factory spare tire carrier.

Manufactured from heavy-duty steel, this extension kit is finished in a durable black powder coat to resist corrosion and trail wear. To maximize utility, Rugged Ridge integrated an off-road antenna mount into the design, providing a secure mounting point for CB or trail antennas. This kit is a direct-fit solution that uses your existing factory light housing for a straightforward installation.

• Adjustable height to clear 33-inch to 42-inch tires
• Compatible with factory spare tire carrier
• Includes integrated off-road antenna mount
• Retains the original factory third brake light
• Heavy-duty steel construction with black powder-coated finish
• Manufacturer Part Number: 11546.23

Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ/TJ/LJ).

The Rugged Ridge XHD Rear Bumper System provides a heavy-duty recovery and protection solution for Jeep owners who demand off-road durability. This modular bumper is constructed from high-strength steel with a textured black powder-coated finish for superior corrosion resistance. It features a specialized inner mounting plate that creates an extremely secure mounting point, reinforced specifically for the rigors of trail use and recovery operations.

The versatile two-piece design allows the bumper to be used as a standalone unit or paired with a tire carrier capable of supporting up to a 35-inch spare tire. For those requiring towing capabilities, this bumper is designed to accept the optional receiver hitch (part number 11580.03).

• Heavy-duty steel construction with textured black finish
• Two reinforced D-ring attachment points for recovery straps and shackles
• Modular design compatible with optional tire carrier and receiver hitch
• Direct fitment to factory mounting points for streamlined installation
• Manufacturer Part Number: 11546.10

Fits select 2018-2025 Jeep Wrangler (JL) and Gladiator (JT) models.

The Rugged Ridge Spartacus Front Bumper (MPN 11544.21) provides a high-strength, off-road protection solution without the excessive weight associated with traditional plate steel bumpers. Engineered from sturdy 11-gauge stamped steel, this bumper uses a specialized manufacturing process to create a lighter structure that maintains structural rigidity and advanced styling.

• 11-gauge stamped steel construction for high strength-to-weight ratio
• Durable satin black powder-coated finish resists corrosion and trail wear
• Engineered to accommodate most popular winch models (Winch plate sold separately)
• Maintains use of factory tow hooks for recovery points
• Weight-conscious design reduces front-end sag compared to heavy aftermarket bumpers
• Includes US Patent Nos. D760,133, D775,013, D800,036, and D776,582

Designed as a direct-fit upgrade, the Spartacus series offers the clearance needed for technical terrain while providing a clean, factory-plus aesthetic that complements the modern Jeep platform. This package includes the bumper only.

Fits 2007-2018 Jeep Wrangler and Wrangler JK (2-door and 4-door models including Rubicon, Sahara, Sport, and X).

The Rugged Ridge Spartacus Front Bumper utilizes a specialized stamping process to provide a high-strength steel upgrade without the excessive weight of traditional heavy-plate aftermarket bumpers. Constructed from 11-gauge stamped steel, this bumper features an aggressive profile and a durable textured black powder-coated finish designed to resist corrosion and trail wear. The stamping technology allows for complex styling cues that complement the factory Jeep body lines while maintaining structural integrity.

This bumper is engineered for versatility, accommodating most popular winch models. It is designed to reuse factory tow hooks for simplified installation and recovery capability. Please note that for winch mounting, the Rugged Ridge Winch Plate (MPN 11541.13) is required and sold separately.

• Manufacturer Part Number: 11544.01
• Material: 11-Gauge Stamped Steel
• Finish: Textured Black Powder Coat
• Installation: Reuses factory tow hooks
• Weight: Lighter than traditional steel plate bumpers
• Patents: US Patent No. D760,133, D775,013, D800,036, D776,582

Fits select 2018-2025 Jeep Wrangler JL and Gladiator JT models equipped with factory Rubicon steel bumpers or Rugged Ridge Spartacus front bumpers.

The Rugged Ridge Winch Mount Plate (MPN 11543.16) provides a heavy-duty, secure foundation for adding recovery capabilities to your Jeep. Engineered for a precision fit, this mounting plate is designed to handle winches with a capacity of up to 12,500 lbs. The high-strength, all-steel construction ensures an unwavering mounting point for most major brands of aftermarket winches during high-stress recovery situations.

Each plate is finished with a durable black powder coating to resist corrosion and withstand the rigors of off-road use. This complete kit includes all necessary brackets and hardware for a straightforward installation on compatible bumper systems.

• Fits factory Rubicon steel bumpers and Rugged Ridge Spartacus front bumpers
• Constructed from high-strength steel for maximum durability
• Compatible with winch capacities up to 12,500 lbs.
• Durable black powder-coated finish for long-term corrosion resistance
• Includes mounting plate, brackets, hardware, and instructions
• Manufacturer Part Number: 11543.16

Fits select 2013-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited editions.

The Rugged Ridge Winch Plate (MPN: 11543.15) provides a robust mounting solution specifically designed for the factory stamped steel bumpers on 2013-2018 Jeep Wrangler JK vehicles. This plate utilizes a versatile two-piece design that significantly increases mounting strength and structural integrity, ensuring your recovery equipment is securely anchored during demanding off-road use.

Each plate is constructed for maximum durability and finished in a resilient black powdercoat to resist corrosion and environmental wear. The kit includes high-strength Class 10.9 hardware to maintain precise tolerances and safety. It is engineered for compatibility with all major winch brands, allowing for a straightforward installation process that integrates with your existing bumper setup.

• Versatile two-piece design for increased mounting strength
• Compatible with all major winch brands and standard mounting patterns
• Includes high-strength Class 10.9 installation hardware
• Finished in durable black powdercoat for long-lasting corrosion protection
• Manufacturer Part Number: 11543.15

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited models including Rubicon, Sahara, Sport, and X trims. The Rugged Ridge Spartacus Winch Plate provides a stable, heavy-duty mounting platform for your recovery winch, ensuring it stays secure during high-load recovery operations.

Specifically engineered for use with the Spartacus series front bumper (MPN: 11544.01), this plate integrates seamlessly into your Jeep's front-end geometry. Constructed from high-strength steel and finished in a durable black coating, it is designed to withstand the rigors of off-road use while resisting corrosion.

• Direct fit for 2007-2018 Jeep Wrangler JK/JKU
• Must be used with Spartacus Front Bumper (Part Number 11544.01)
• Heavy-duty steel construction for maximum structural integrity
• Protective black finish for weather and trail resistance
• Manufacturer Part Number: 11543.13
• Includes Limited 5-Year Warranty

Fits select 2007-2025 Jeep Wrangler and 2020-2025 Jeep Gladiator models.

The Rugged Ridge All Terrain Modular Bumper System is engineered to provide a high level of functionality and durability for off-road enthusiasts. Modeled after the proven XHD Modular Bumper System, this bumper is constructed from heavy-duty steel with a durable black powder-coated finish to resist corrosion and trail debris. Its modular design allows owners to customize the setup for specific recovery and styling requirements.

Designed as a versatile platform, this bumper can be enhanced with various bolt-on accessories to match your build's needs. Whether you are navigating tight technical trails or setting up for heavy-duty recovery, the All Terrain system provides a solid foundation for your front-end protection.

• Constructed from durable black powder-coated steel for maximum longevity
• Modular design allows for custom configurations with optional strikers and ends
• Compatible with All Terrain Double X Striker and removable Winch Plate Cover (sold separately)
• Accommodates optional Over-Rider and Stubby Ends to complete the modular look
• Precision-engineered for Jeep Wrangler (JK/JL) and Gladiator (JT) frames
• Manufacturer Part Number: 11543.01