Fits 1997-2006 Jeep Wrangler TJ (Rubicon, Sahara, SE, Sport, X, and 65th Anniversary Edition). Please note: these bars do NOT fit Wrangler Unlimited LJ models.

Rugged Ridge Spartan Nerf Bars are the ideal solution for Jeep TJ owners who need assistance entering or exiting a lifted vehicle without compromising off-road ground clearance. These steps feature a high-mount 3-inch OD primary tube that sits closer to the body than traditional tube steps, maintaining a clean, aggressive profile. The patented drop-down step hoops provide secure, firm footing exactly where you need it most.

Built for the trail, these side steps are constructed from heavy-duty .084 wall steel tubing. To ensure long-lasting corrosion resistance and a rugged look, they are finished with a durable 3-stage textured black powder coat. This kit includes all necessary mounting hardware and detailed instructions for a straightforward installation to factory mounting points.

• Manufacturer Part Number: 11596.11
• Tube Diameter: 3-inch OD primary tube
• Material: .084 wall steel tubing
• Finish: 3-stage textured black powder coat
• Step Type: Patented drop-down hoop design
• Hardware: Full installation hardware included
• Warranty: Limited 5-year manufacturer warranty

Fits 2018-2024 Jeep Wrangler JL 4-Door models (including Unlimited, 4xe, and Rubicon 392).

Rugged Ridge Spartan Nerf Bars offer a technical, high-clearance solution for Jeep Wrangler JL owners who need assistance entering a lifted vehicle without compromising off-road performance. These side steps feature a 3-inch OD primary tube that sits higher than traditional tube steps, maintaining a clean aesthetic and protecting the rocker area. The patented drop-down step hoops are strategically positioned at each door to provide firm, secure footing for passengers.

Built for the trail, these bars are constructed from heavy-duty .084-wall steel tubing. The finish is a durable 3-stage textured black powder coat designed to resist corrosion and withstand the rigors of daily use. Each set includes all necessary installation hardware and detailed instructions for a straightforward bolt-on process.

• 3-inch OD primary tube for high-clearance protection
• Heavy-duty .084-wall steel tubing construction
• Patented drop-down step hoops for secure entry and exit
• Durable 3-stage textured black powder coat finish
• Includes all required mounting hardware
• Manufacturer Part Number: 11596.04
• Limited 5-Year Warranty

Fits 2018-2025 Jeep Wrangler 2-Door models (including Rubicon, Sport, Sport S, Willys, and Willys Sport).

Rugged Ridge Spartan Nerf Bars are the ideal solution for Jeep owners who need reliable assistance climbing into a lifted vehicle without sacrificing off-road ground clearance. These bars feature a high-mount 3-inch OD primary tube that sits closer to the body than conventional tube steps for a streamlined look. Patented drop-down step hoops at each door provide firm, secure footing for easier cabin entry and exit.

Built for durability, these steps are constructed from heavy-duty .084 wall steel tubing. They are finished with a resilient 3-stage textured powder coat designed to withstand the rigors of trail use and resist corrosion. The integrated no-slide step pads provide consistent traction in all weather conditions.

• Manufacturer Part Number: 11596.03
• Primary Tube: 3-inch OD steel
• Material: .084 wall steel tubing
• Finish: 3-stage textured black powder coat
• Step Type: Patented drop-down hoops with no-slide pads
• Installation: Hardware and instructions included

Fits 2018-2025 Jeep Wrangler 4-Door (JL) models, including Sport, Sahara, Rubicon, Willys, and 4xe trims.

Rugged Ridge 3-inch round tube side steps provide a classic muscular look that stands up to the scale of oversized off-road tires. These steps are engineered from heavy-duty .07-inch wall thickness steel tubing, undergoing a dual-stage protection process with a corrosion-resistant E-coat and a textured black powder coat finish. Designed for a custom fit on your JL 4-Door, the high-strength mounting brackets bolt directly to the factory points for a flex-free installation. Each step rail includes UV-treated step pad inserts at both doors to ensure secure, slip-resistant entry and exit in all weather conditions.

• Tubing: 3-inch diameter steel with .07-inch wall thickness
• Finish: Dual-stage textured black powder coat over E-coating for rust resistance
• Weight Capacity: 300 lb. maximum limit per side
• Step Pads: UV-treated inserts for long-term durability and traction
• Hardware: Includes powder-coated steel brackets and all necessary installation hardware
• Manufacturer Part Number: 11591.12

Fits 2007-2018 Jeep Wrangler Unlimited JK models including Rubicon, Sahara, Sport, and X trims.

Rugged Ridge 3-inch round tube steps provide a stable point of entry and exit while adding classic off-road styling to your Jeep. These side steps are engineered for longevity, featuring 0.07-inch wall steel tubing that is treated with a specialized E-coat undercoating before receiving a durable textured black powder-coated finish. This dual-layer protection creates a superior bond to the metal for maximum chip and rust resistance in harsh environments.

Installation is straightforward using the included 3/16-inch powder-coated steel brackets, designed for a custom, flex-free fit that bolts to the vehicle. Each step features a pre-installed, UV-treated non-slip poly pad secured with five mounting pins to protect the metal surface from moisture and prevent corrosion.

• 3-inch round steel tubing with 0.07-inch wall thickness
• Dual-stage finish: E-coated and textured black powder-coated for rust protection
• Heavy-duty 3/16-inch powder-coated steel mounting brackets for a flex-free fit
• UV-treated non-slip step pads with 5-pin mounting
• Includes all necessary installation hardware and brackets
• Manufacturer Part Number: 11591.06

Fits 1997-2006 Jeep Wrangler TJ models, including Sport, Sahara, Rubicon, SE, and Unlimited.

Improve your vehicle's accessibility and exterior styling with a set of Rugged Ridge 3-inch round side steps. These heavy-duty side steps are engineered to mount directly to the vehicle frame, providing a rigid, no-bounce fit that outperforms body-mounted alternatives. Each step is equipped with a high-traction, no-slip step pad secured by rust-proof fasteners, ensuring a safe entry and exit point that withstands the elements and off-road debris.

• 3-inch diameter round steel tubing for maximum strength
• Durable textured black finish for corrosion resistance
• Heavy-duty frame-mounted design eliminates flex and bounce
• UV-treated no-slip step pads provide secure footing in all weather
• Includes all necessary hardware for installation
• Manufacturer Part Number: 11591.04
• Limited 5-year warranty

Fits 1976-1986 Jeep CJ7.

Enhance the accessibility and rugged appearance of your CJ7 with Rugged Ridge 3-Inch Round Tube Side Steps. These side steps are engineered for a secure, no-bounce fit by mounting directly to the vehicle's frame. Each tube is finished in a durable textured black powder coat to resist corrosion and withstand the elements while complementing the classic Jeep aesthetic.

The steps feature integrated no-slip step pads, providing a reliable surface for entry and exit in all weather conditions. These pads are secured to the tube using rust-proof fasteners, ensuring long-term durability and preventing the hardware issues common in lower-quality alternatives.

• Direct frame-mount design for maximum stability and a no-bounce fit
• Heavy-duty 3-inch round steel tube construction
• Textured black powder-coated finish for superior corrosion resistance
• No-slip step pads with rust-proof hardware
• Manufacturer Part Number: 11591.02
• Limited 5-Year Warranty

Fits 1984-2001 Jeep Cherokee (XJ) models including Sport, SE, Limited, and Classic.

Rugged Ridge 3-inch round side steps provide a stable and secure entry point for your Jeep Cherokee XJ. Engineered for durability, these side steps mount directly to the vehicle frame to ensure a rigid, no-bounce fit. The 3-inch round tubing is finished in a textured black powder coat for superior corrosion resistance and a rugged off-road appearance.

Safety is prioritized with integrated no-slip step pads, which are secured to the main tubes using rust-proof fasteners to prevent shifting and ensure long-term reliability. This complete set includes both driver and passenger side steps and all necessary mounting hardware for a straightforward installation.

• Tubing Diameter: 3 inches
• Finish: Textured Black powder coat
• Mounting Style: Frame mounted for maximum stability
• Step Surface: No-slip pads with rust-proof fasteners
• Fitment: 1984-2001 Jeep Cherokee (XJ)
• Manufacturer Part Number: 11590.81
• Warranty: Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler 2-Door models, including Rubicon, Sahara, Sport, X, and 70th/75th Anniversary editions.

Complete your Jeep's exterior with a set of Rugged Ridge 3-inch tubular side steps. These steps provide a secure point of entry and exit while maintaining a classic off-road aesthetic. Constructed from heavy-duty .07-inch wall steel tubing, each step undergoes a specialized E-coating process that bonds to the metal for superior corrosion resistance before receiving a chip-resistant gloss black powder coat finish. The custom-fit mounting brackets are laser-cut from 3/16-inch powder-coated steel to ensure a stable, flex-free installation using factory mounting points.

For maximum safety in all weather conditions, each tube features a pre-installed, UV-treated non-slip step pad. These pads are secured using five internal mounting pins to eliminate exposed metal, preventing the rust issues commonly associated with inferior surface-mounted pads.

• 3-inch round tubular design for a clean, classic profile
• Durable .07-inch wall steel construction with dual-stage E-coat and powder coat finish
• Heavy-duty 3/16-inch steel mounting brackets for flex-free performance
• UV-resistant non-slip step pads with 5-pin secure mounting
• Includes all necessary installation brackets and hardware
• Manufacturer Part Number: 11590.05
• Limited 5-Year Warranty

Fits 1976-1983 Jeep CJ5. These Rugged Ridge 3-inch round tube side steps provide a stable, secure entry point for your classic Jeep. Engineered to mount directly to the vehicle frame, this design eliminates the flex and bounce often found with body-mounted alternatives. Each step features a durable, UV-treated no-slip step pad secured to the tube with rust-proof fasteners to ensure long-term durability and safety in all weather conditions.

• Manufactured from heavy-duty 3-inch round steel tubing
• Durable gloss black powder coat finish for corrosion resistance
• Frame-mounted design provides a rigid, no-bounce fit
• Includes no-slip step pads for secure footing
• Uses rust-proof fasteners for step pad attachment
• Manufacturer Part Number: 11590.01
• Limited 5-year warranty

Fits all 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited models across all trim levels.

The Rugged Ridge Off-Road Jack Mounting Bracket Kit provides a secure and stable solution for carrying a high-lift style jack on your Jeep's tailgate. This specific kit combines the Off-Road Jack Mounting system (#11586.01) with a specialized spacer kit (#11586.03) designed specifically for compatibility with the Rugged Ridge Spartacus Heavy Duty Tire Carrier. By mounting directly to the factory tailgate hinges, this bracket positions the jack vertically and out of the way, ensuring it is readily accessible when needed on the trail.

• Includes Off-Road Jack Mounting system (#11586.01) and Spacer Kit (#11586.03)
• Compatible with Rugged Ridge Spartacus Heavy Duty Tire Carrier
• Mounts directly to factory tailgate hinges for maximum rigidity
• Compatible with factory bumpers and most aftermarket bumpers without tire carriers
• Fits most standard off-road style jacks
• Manufacturer Part Number: 11586.08
• Includes a limited 5-year manufacturer warranty

Fits select 1992-2018 Jeep Wrangler YJ, TJ, and JK models (including Sahara, Rubicon, Sport, and Unlimited trims).

Protect your recovery gear and reclaim your cargo space with the Rugged Ridge Off-Road Jack Roll Bar Mounting Bracket. Storing a Hi-Lift style jack on the exterior of your vehicle exposes it to corrosive road salt, debris, ice, and potential theft. These brackets allow you to securely mount your jack to the interior sports bar, keeping it within reach but out of the elements.

The no-drill installation utilizes existing factory locations for a straightforward setup, ensuring the jack is held firmly in place without rattling or sacrificing rear floor space. This kit is ideal for Jeep owners who need to maximize storage efficiency while maintaining easy access to their recovery equipment.

• Mounts off-road jack securely to the interior roll bar/sports bar
• Protects jack from weather damage, road grime, and theft
• Saves valuable cargo area floor space
• Easy bolt-on installation requires no drilling
• Manufacturer Part Number: 11586.02
• Limited 5-Year Warranty

Fits 2018-2025 Jeep Wrangler JK and JL models, including Rubicon, Sahara, Sport, Willys, and Unlimited trims.

After upgrading to an aftermarket rear bumper, license plate placement often becomes an afterthought. The Rugged Ridge Tag Relocation Bracket (MPN: 11585.25) provides a professional solution, moving your plate from the vulnerable factory bumper pocket to a secure, highly visible position on the spare tire carrier. This relocation protects your tag from trail damage while ensuring it remains street-legal and visible.

Constructed from heavy-duty steel with a durable satin black powder coat finish, this bracket is built to withstand off-road vibration and harsh weather. The design is fully adjustable to accommodate various wheel widths and offsets, ensuring a flush fit against your spare. Critically, this bracket is engineered for full compatibility with factory rearview camera equipment, preserving your safety features without modification.

• Relocates license plate to the center of the spare tire carrier
• Maintains factory backup camera functionality
• Fully adjustable for different wheel and tire offsets
• Durable steel construction with satin black powder coat
• Manufacturer Part Number: 11585.25
• Limited 5-Year Warranty

Fits select 2018-2026 Jeep Wrangler JK and JL models, including Sport, Sahara, Rubicon, and 4xe.

When you install a lift kit or upsize to a larger spare tire, the factory high-mount third brake light often becomes obscured or is removed entirely. The Rugged Ridge Third Brake Light LED Ring restores essential safety visibility by placing a brilliant ring of 93 torch-red LEDs directly behind your spare wheel. This ensures your braking intentions are clear to following drivers regardless of tire size.

Engineered for durability and off-road resilience, the assembly features a rugged polypropylene mounting plate that resists corrosion and impacts. It is designed for versatile fitment, accommodating rim diameters from factory stock up to 20-inch aftermarket wheels. The kit includes heat-shrink connectors to ensure a weather-sealed, reliable electrical connection for long-term performance in harsh environments.

• Manufacturer Part Number: 11585.06
• LED Count: 93 Radiant Torch Red LEDs
• Mounting Material: Durable Polypropylene Plate
• Wheel Compatibility: Fits stock to 20-inch rim diameters
• Installation Hardware: Heat-shrink connectors included
• Warranty: Limited 5-Year Warranty

Fits select 1987-2018 Jeep Wrangler, Wrangler Unlimited, and Wrangler JK models. This Rugged Ridge Accessory Brake Light LED Ring solves the visibility issues common with lifted Jeeps or oversized spare tire setups that obscure the factory high-mount third brake light.

By mounting directly behind the spare tire, this ring restores essential safety functions while providing a custom look. It features 93 radiant torch-red LEDs that provide immediate attention for following drivers, both on and off-road. The plate is constructed from durable polypropylene and designed for universal 5-lug applications, including 5x4.5, 5x5, and 5x5.5 inch bolt patterns. To ensure reliability in harsh environments, it is equipped with waterproof connectors to prevent moisture intrusion.

• 93 high-output torch-red LEDs for maximum visibility
• Durable polypropylene mounting plate
• Compatible with 5x4.5, 5x5, and 5x5.5 inch lug patterns
• Fits rim diameters from 15 inches up to 20 inches
• Waterproof electrical connectors for all-weather durability
• Manufacturer Part Number: 11585.04
• Limited 5-Year Warranty

Fits 1997-2006 Jeep Wrangler (TJ/LJ) including SE, Sahara, Sport, Rubicon, X, and Unlimited models.

When upgrading to 33-inch or 34-inch tires while retaining the factory spare tire carrier, the spare tire often obstructs the stock third brake light. The Rugged Ridge Third Brake Light Spacer (MPN 11585.03) provides a practical solution by elevating the light assembly exactly 2 inches. This lift restores visibility of the center high-mount stop lamp (CHMSL), ensuring you stay compliant with safety standards and visible to trailing drivers.

Built for the trail, this spacer is manufactured from heavy-duty steel and finished in a durable black powder coating to resist corrosion and harsh weather. It is a direct bolt-on component that integrates seamlessly with the original mounting points. This kit is a cost-effective alternative to full aftermarket tire carriers when running oversized rubber on the street or trail.

• Raises third brake light by 2 inches to clear up to 34-inch tires
• Constructed from heavy-duty steel for lasting durability
• Black powder-coated finish resists rust and corrosion
• Simple bolt-on installation using factory mounting points
• Manufacturer Part Number: 11585.03
• Limited 5-Year Warranty

Fits select 1976-2018 Jeep CJ5, CJ7, Scrambler, and Wrangler models (including JK).

Clear larger aftermarket bumpers or oversized spare tires with the Rugged Ridge Spare Tire Spacer. This spacer is engineered to relocate your spare tire two inches up and two inches out, providing necessary clearance while utilizing your factory mounting points. Constructed to original Omix specifications, it features a durable black powder-coated finish to resist corrosion and the elements during off-road use.

This component is designed as a direct-fit solution for vehicles with 5x4.5-inch or 5x5.5-inch wheel bolt patterns. Please note this spacer is specifically intended for use with part number 18676.60.

• Manufacturer Part Number: 11585.02
• Relocation: 2 inches up and 2 inches out
• Bolt Patterns Supported: 5x4.5 in. and 5x5.5 in.
• Finish: Black Powder Coated
• Installation: Bolts to existing factory spare tire mount
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 1987-2006 Jeep Wrangler (All submodels including Sport, Sahara, Rubicon, SE, and Base).

Upgrading to oversized tires requires a spare tire that matches your rig's capability, but factory mounts often lack the clearance for wider wheel and tire combinations. The Rugged Ridge HD Tire Carrier Mount solves this by relocating your spare tire two inches further away from the tailgate, providing the necessary space for up to a 35-inch tire.

Constructed from heavy 1/4-inch steel plate, this bracket is engineered to handle the increased weight and leverage of larger tires. It bolts directly to the factory mounting points on the tailgate for a secure installation that maintains accessibility and functionality.

• Construction: 1/4-inch heavy-duty steel plate
• Offset: Relocates tire 2 inches further from the body for maximum clearance
• Compatibility: Supports spare tires up to 35 inches in diameter
• Fitment: Direct bolt-on for 1987-2006 Jeep Wrangler models
• Manufacturer Part Number: 11585.01
• Warranty: Limited 5-year warranty

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited (Rubicon, Sahara, Sport, X, and 70th/75th Anniversary editions).

Equip your Jeep for towing and rack-mounted accessories with this Rugged Ridge Receiver Hitch and Wiring Kit. This direct-fit solution is designed specifically for the Wrangler JK chassis, mounting securely to factory points to provide a standard 2-inch receiver. The kit simplifies the installation process by including a plug-and-play 4-pin wiring harness that integrates with your vehicle's electrical system without cutting or splicing. A durable rubber hitch plug featuring the Rugged Ridge logo is included to protect the receiver tube from debris and corrosion when not in use.

• Direct-fit design for easy bolt-on installation
• Standard 2-inch receiver opening for trailers and racks
• Includes plug-and-play 4-pin towing wiring harness
• Protective rubber hitch plug with embossed RR logo
• Manufacturer Part Number: 11580.60
• Limited 5-year warranty

Fits 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models including Sport, Sahara, Rubicon, and 4xe.

Equip your Jeep for the trail or the highway with this Rugged Ridge Receiver Hitch Kit. Designed as a direct bolt-on solution, this 2-inch receiver provides a 3,500-pound towing capacity and a 350-pound tongue weight rating, matching OE specifications without requiring vehicle modifications. The hitch features a sturdy, one-piece welded design for maximum structural integrity and long-term durability.

This kit includes a vehicle-specific wiring harness to simplify installation. The harness uses the correct gauge wire and factory-style connectors for a plug-and-play setup, ensuring a reliable connection for your trailer lights without cutting or splicing factory looms. Each kit is finished in a durable black powder coat to resist corrosion and weather wear.

• Manufacturer Part Number: 11580.57
• Receiver Size: 2-inch
• Towing Capacity: 3,500 lbs.
• Tongue Weight: 350 lbs.
• Construction: One-piece welded steel
• Installation: Bolt-on, no drilling required
• Includes: Receiver hitch and plug-and-play wiring harness
• Warranty: 5-Year Limited Warranty

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models. This complete Rugged Ridge hitch kit provides a reliable towing solution designed to match OE specifications for a clean, factory-style installation on your Jeep.

Engineered for versatility, the 2-inch receiver allows you to haul utility trailers, bike racks, or cargo carriers. The assembly features a durable black powder-coated finish to resist rust and road debris. This kit is a comprehensive package, including the receiver, a 2-inch tow ball, hitch pin, and a dedicated wiring harness for a complete setup.

• Tow Rating: 2,000-lb gross trailer weight
• Tongue Weight: 200-lb maximum
• Receiver Size: 2-inch
• Finish: Corrosion-resistant black powder coat
• Style: OE-style bolt-on design
• Included Hardware: Receiver, wiring harness, hitch pin, and 2-inch ball
• Manufacturer Part Number: 11580.54

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims.

Equip your Jeep for the trail or the road with the Rugged Ridge 2-inch receiver hitch kit. This kit is designed as a one-piece welded assembly for maximum strength and durability, matching the factory towing capacity of your vehicle. The custom-engineered design bolts directly to the factory mounting points on the rear frame, requiring no custom fabrication for installation. It features a cutout specifically for mounting the included wiring harness.

To ensure long-lasting performance in harsh environments, the hitch features a black powder-coated finish that resists water and corrosion. The kit comes complete with a trailer wiring harness and a protective receiver plug featuring the Jeep logo. Always consult your owner's manual for specific towing limits and do not exceed the recommended vehicle capacity.

• Receiver Size: 2-inch
• Tow Rating: 3,500 lbs
• Finish: Black Powder Coated
• Construction: One-piece welded assembly
• Installation: Bolt-on to factory mounting points
• Includes: Receiver hitch, wiring harness, and Jeep logo plug
• Manufacturer Part Number: 11580.52

Fits 2007-2018 Jeep Wrangler and Wrangler JK all submodels including Rubicon, Sahara, Sport, and X.

This Rugged Ridge receiver hitch kit is engineered to match the original equipment design, providing a reliable towing solution that bolts directly to the factory mounting points on the rear of your Jeep. Constructed as a one-piece welded assembly, this hitch ensures maximum strength and durability for recovery or towing tasks. The assembly features a durable black powder coat finish to resist corrosion and moisture, along with a integrated cutout for secure mounting of the included wiring harness.

• Fits 2-inch receiver accessories and ball mounts
• Tow Rating (with weight distributing equipment): 3,500 lbs.
• Tongue Weight Rating (with weight distributing equipment): 350 lbs.
• Standard Tow Rating: 2,000 lbs.
• Standard Tongue Weight Rating: 200 lbs.
• Includes vehicle-specific wiring harness for a complete installation
• Manufacturer Part Number: 11580.51

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited (Sport, Sahara, Rubicon, Willys, and 4xe).

The Rugged Ridge 2-inch receiver hitch provides a reliable, OE-style solution for JL owners needing towing capability or a secure mount for hitch-mounted accessories like bike racks and cargo carriers. Engineered for a precise fit, this hitch bolts directly to factory mounting points on the rear frame, eliminating the need for custom fabrication, drilling, or welding during installation.

Constructed from heavy-duty steel and finished with a durable black powder coat, this component is designed to withstand environmental exposure and trail debris. It maintains an OE-style profile to preserve vehicle departure angles while offering a 3,500 lb tow rating. Note: Always refer to your owner's manual to confirm your vehicle's specific towing capacity before use.

• Receiver Size: 2-inch
• Gross Towing Capacity: 3,500 lbs
• Tongue Weight Capacity: 350 lbs
• Finish: Black Powder Coated
• Installation: Bolt-on (Factory Mounting Points)
• Manufacturer Part Number: 11580.11
• Warranty: Limited 5-Year Warranty

Fits select 1987-2006 Jeep Wrangler models including Base, Sport, Sahara, Rubicon, and Unlimited (YJ/TJ). This frame-mounted receiver hitch provides functional light-duty towing capability for Jeeps equipped with Rugged Ridge tube bumpers.

Constructed for durability and finished in a resilient black powder coat, this hitch is designed to integrate seamlessly with specific Rugged Ridge rear tube bumpers (MPNs 11570.03, 11571.03, 11572.03, and 11573.03). It utilizes existing frame mounting points for a secure installation, providing a standard 2-inch receiver for accessories or small trailers.

• Receiver Size: 2.0 inches
• Gross Towing Weight: 2,000 lbs
• Tongue Weight Capacity: 200 lbs
• Finish: Black Powder Coated
• Mounting: Frame Mounted
• Manufacturer Part Number: 11580.02
• Warranty: Limited 5-Year Warranty

Fits select 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models. The Rugged Ridge 3-inch Double Rear Tube Bumper delivers a classic off-road aesthetic combined with rugged, stainless steel durability.

Engineered for off-road enthusiasts, this bumper features smooth ground welds and fully welded end caps—eliminating the flimsy plastic caps found on lesser alternatives. The recessed center section provides necessary clearance for oversized spare tires up to 35 inches. To ensure a clean, finished look, Rugged Ridge includes an exclusive UV-treated textured plastic filler plate designed to bridge the gap between the vehicle body and the bumper assembly.

• Dual 3-inch diameter tube construction for superior strength
• Corrosion-resistant stainless steel finish
• Fully welded end caps for maximum longevity and debris protection
• Recessed center cut-out accommodates up to 35-inch spare tires
• Includes proprietary UV-treated textured plastic filler plate
• Manufacturer Part Number: 11573.10
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 2007-2018 Jeep Wrangler and Wrangler JK 2-door and 4-door models (Rubicon, Sahara, Sport, X, and Anniversary editions).

The Rugged Ridge 3-inch Double Tube Rear Bumper is engineered for off-road durability and long-term rust prevention. Unlike many tubular bumpers that utilize plastic end caps, this bumper features fully welded steel end caps to withstand trail impacts without losing components. The construction utilizes a proprietary smooth-ground welding process that eliminates small weld pockets, ensuring complete paint coverage to prevent corrosion at the joints.

This rear bumper is designed with a wide 17-inch center opening, providing enough clearance to accommodate oversized spare tires up to 31 inches on the factory mounting point. For utility, the design is compatible with optional frame-mounted hitches, supporting a 2,000-lb towing capacity and 200-lb tongue weight.

• 3-inch diameter steel tube construction
• Textured black powder-coated finish
• Smooth-ground welds for superior rust protection
• Permanently welded steel end caps
• 17-inch rear opening for oversized spare tires
• Manufacturer Part Number: 11571.10
• Limited 5-Year Warranty

Fits 1987-2006 Jeep Wrangler YJ and TJ models including Sport, Sahara, Rubicon, and Unlimited. This Rugged Ridge 3-inch Double Tube Rear Bumper provides classic styling with modern off-road durability.

Unlike competitors that use plastic end caps, this bumper features fully welded end caps to ensure they stay attached during rigorous trail use. Every joint undergoes a specialized smooth-grind process to eliminate weld pockets where moisture can trap and cause corrosion, ensuring long-term rust protection under the gloss black finish. The design features a wide 17-inch center opening that allows you to mount up to a 31-inch oversized tire on the factory spare carrier without interference.

• Tube Diameter: 3-inch heavy-duty steel
• Finish: Gloss Black
• Construction: Smooth ground welds for enhanced rust protection
• End Caps: Fully welded steel (no plastic inserts)
• Tire Clearance: Wide 17-inch opening accommodates up to 31-inch spare tires
• Towing Capacity: Optional hitch supports 2,000 lbs (200 lbs tongue weight)
• Manufacturer Part Number: 11570.03
• Warranty: Limited 5-Year Warranty

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and X (2-Door and 4-Door).

The Rugged Ridge 3-inch Double Tube Front Bumper provides classic styling and heavy-duty protection for your Wrangler's front end. Built from durable 3-inch diameter steel tubing, this bumper features an integrated raiser (center hoop) to enhance the off-road profile and offer additional protection for the grille and radiator area. Unlike lower-quality alternatives that use plastic end caps, Rugged Ridge bumpers feature fully welded end caps to prevent moisture intrusion and ensure long-term structural integrity.

Every bumper is treated with a multi-stage finish, starting with an E-coat to provide a foundational rust-resistant layer, followed by a resilient textured black powder coat. Rugged Ridge utilizes an exclusive smooth grind process on all weld points to eliminate small pockets that often miss paint coverage, effectively preventing the surface rust common in traditional tube bumpers.

• 3-inch diameter double tube steel construction for classic Jeep styling
• Integrated center raiser hoop for additional front-end protection
• Multi-stage textured black powder coat over a rust-resistant E-coat base
• Fully welded end caps eliminate the need for plastic inserts
• Smooth grind weld process ensures total paint coverage and reduces rust risk
• Manufacturer Part Number: 11561.10
• Limited 5-year manufacturer warranty

The Rugged Ridge Front Double Tube Bumper provides a classic off-road look with heavy-duty protection for 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler models. Constructed from 3-inch diameter steel tubing, this bumper features an enlarged center opening to maximize airflow to the radiator, ensuring optimal cooling during low-speed crawling or highway driving.

Unlike budget alternatives with plastic plugs, this bumper features fully welded end caps that are ground smooth before finishing to prevent internal corrosion and provide a clean, seamless appearance. For expanded utility, the assembly includes two integrated light tabs, allowing for the easy mounting of auxiliary off-road lighting. This version is designed without a raiser (grille guard hoop) for a low-profile, traditional aesthetic.

• Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ, TJ, and LJ)
• Heavy-duty 3-inch diameter steel tube construction
• Durable textured black powder coat finish
• Two welded light tabs for auxiliary lighting
• Fully welded end caps for superior corrosion resistance
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 11561.02
• Limited 5-Year Warranty