Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 in. ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.

• Includes Drag Link and Ends
• True DOM Tubing w/No Seams
• Uses 7/8 in. Tie Rod Ends
• 1/4 in. Wall Thickness
• One Ton Strength

This Part Fits:

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 in. ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.

• True DOM Tubing w/No Seams
• Uses 7/8 in. Tie Rod Ends
• Includes Tie Rod and Ends
• 1/4 in. Wall Thickness
• One Ton Strength

This Part Fits:

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 in. ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.

• True DOM Tubing w/No Seams
• Uses 7/8 in. Tie Rod Ends
• Includes Tie Rod and Ends
• 1/4 in. Wall Thickness
• One Ton Strength

This Part Fits:

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 in. ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.

• Includes Drag Link and Ends
• True DOM Tubing w/No Seams
• Uses 7/8 in. Tie Rod Ends
• 1/4 in. Wall Thickness
• One Ton Strength

This Part Fits:

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 in. dia. steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 in. rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.

• True DOM Tubing w/No Seams
• Uses 7/8 in. Tie Rod Ends
• Includes Tie Rod and Ends
• 1/4 in. Wall Thickness
• One Ton Strength

This Part Fits:

When upgrading to oversize tires the pressures exerted on your steering box increase dramatically, sometimes to the point of ripping the steering box off its mounts! This Rugged Ridge steering box brace will lock that steering box in place under even the most brutal wheeling conditions. Includes mounting hardware.

• Designed To Upgrade a Known Issue
• Limited 5 Year Warranty
• Black Powdercoated
• Hardware Included
• 38 in. Long

This Part Fits:

This black powder-coated heavy duty steering box brace from Rugged Ridge was designed to hold your steering box in place under extreme stress.

• Holds Steering Box in Place Under Extreme Stress
• Limited 5 Year Warranty
• Use w/Power Steering
• Black Powdercoated

This Part Fits:

Over our years of off-roading, we've learned the hard way that hard rocks and trailer hitches don't play well together. One afternoon of impacts can grate your nerves and turn your 2 in. square receiver into scrap metal. That's why we engineered the Rugged Ridge Hitch Skid Plate from an incredibly strong ¼-inch steel plate so it brushes off severe impacts without skipping a beat. The skid plate assembly fits any standard 2 in. receiver and features a built-in step granting convenient access to truck beds, cargo areas, or roof-mounted racks. Finished with a lightly textured black powder coat, the Hitch Skid Plate looks at home on the pavement and in the backwoods, with a design that functions flawlessly in any terrain.

• Constructed From Sturdy 1/4 in. Steel Plate With Lightly Textured Powder Coat Finish
• Designed To Protect Hitch And Rear Undercarriage From Off-Road Damage
• Built-In Step Offers Easier Access To Truck Bed Or Cargo Area
• Fits Any Standard 2 in. Receiver Hitch
• Limited 5 Year Warranty

This Part Fits:

The heart of the Rugged Ridge Front Bumper Skid Plate is an incredibly strong body stamped from 4mm thick steel plate and features a unified fold-and-weld construction to deliver full protection to the factory crash bar and electronic sway bar disconnect components. Designed to work with Rugged Ridge Arcus, Spartacus and HD Series bumpers, the Front Skid Plate helps provide a more.

• Shields and Protects Factory Crash/Sway Bar Disconnect From Hazards

This Part Fits:

Custom designed to protect the steering components on all 2007-2016 Jeep Wranglers, this overbuilt skid plate is a must for those off road adventures. Constructed of durable 1/4 in. powder coated steel with a rust resistant E-Coating, this Skid Plate is designed to take whatever the trail throws at you! Designed to fit with all Rugged Ridge front bumpers (looks amazing with the XHD Bumper system!) or all factory front bumpers, this skid plate provides protection for all front steering components including the very expensive electric sway bar disconnect system found on Rubicon models. Easy to install frame mount design incorporates special gussets and welded brackets to ensure long life and great off road performance. Grinding, drilling and cutting may be required.

• Will Not Work w/Cam Bolts Found in Some Aftermarket Lift Kits
• Black Powdercoated
• Easy to Install
• 3/16 in. Steel
• 4 Piece Kit

This Part Fits:

Just one look at the Rugged Ridge AmFib Snorkel System for Wrangler JL & Gladiator JT models and you know this is not your typical snorkel. We designed the Low Mount Snorkel to make a visual splash by devising a base that blends seamlessly with the factory cowl panel and then topped it off with a low air intake that instantly becomes the focal point that you can't take your eyes off of. While making such a big splash is great, our quest for a superior snorkel went far beyond the visual. We engineered the entire AmFib snorkel inside the Jeep to literally make waves, by designing a system that is over-engineered to be less invasive, performs better and installs easier than any snorkel we've ever built before. The entire system and its components look 'at-home', as though they we're part of the Jeeps original design. But where the rubber really meets the road is where the AmFib Snorkel truly shines…Quickly swap the low air intake for the High Mount Intake and you can defy water crossings with total confidence. Patents Pending and U.S. Patent 8,960,347

• Innovatively Designed To Protect Engine During Water Crossings
• Advanced Snorkel System For 2018-Wrangler JL and Gladiator JT
• Modular Functionality Converts From Low To High Mount Snorkel
• Intrinsic Styling Blends Perfectly w/Factory Trim
• Quick/Easy No-Drill Installation C.A.R.B. Exempt

This Part Fits:

Just one look at the Rugged Ridge AmFib Snorkel System for Wrangler JL & Gladiator JT models and you know this is not your typical snorkel. We designed the Low Mount Snorkel to make a visual splash by devising a base that blends seamlessly with the factory cowl panel and then topped it off with a low air intake that instantly becomes the focal point that you can't take your eyes off of. While making such a big splash is great, our quest for a superior snorkel went far beyond the visual. We engineered the entire AmFib snorkel inside the Jeep to literally make waves, by designing a system that is over-engineered to be less invasive, performs better and installs easier than any snorkel we've ever built before. The entire system and its components look 'at-home', as though they we're part of the Jeeps original design. But where the rubber really meets the road is where the AmFib Snorkel truly shines…Quickly swap the low air intake for the High Mount Intake and you can defy water crossings with total confidence. Patents Pending and U.S. Patent 8,960,347

• Innovatively Designed To Protect Engine During Water Crossings
• Advanced Snorkel System For 2018-Wrangler JL and Gladiator JT
• Modular Functionality Converts From Low To High Mount Snorkel
• Intrinsic Styling Blends Perfectly w/Factory Trim
• Quick/Easy No-Drill Installation C.A.R.B. Exempt

This Part Fits:

Just one look at the Rugged Ridge AmFib Snorkel System for Wrangler JL & Gladiator JT models and you know this is not your typical snorkel. We designed the Low Mount Snorkel to make a visual splash by devising a base that blends seamlessly with the factory cowl panel and then topped it off with a low air intake that instantly becomes the focal point that you can't take your eyes off of. While making such a big splash is great, our quest for a superior snorkel went far beyond the visual. We engineered the entire AmFib snorkel inside the Jeep to literally make waves, by designing a system that is over-engineered to be less invasive, performs better and installs easier than any snorkel we've ever built before. The entire system and its components look 'at-home', as though they we're part of the Jeeps original design. But where the rubber really meets the road is where the AmFib Snorkel truly shines…Quickly swap the low air intake for the High Mount Intake and you can defy water crossings with total confidence. Patents Pending and U.S. Patent 8,960,347

• Innovatively Designed To Protect Engine During Water Crossings
• Advanced Snorkel System For 2018-Wrangler JL and Gladiator JT
• Modular Functionality Converts From Low To High Mount Snorkel
• Intrinsic Styling Blends Perfectly w/Factory Trim
• Quick/Easy No-Drill Installation C.A.R.B. Exempt

This Part Fits:

Just one look at the Rugged Ridge AmFib Snorkel System for Wrangler JL & Gladiator JT models and you know this is not your typical snorkel. We designed the Low Mount Snorkel to make a visual splash by devising a base that blends seamlessly with the factory cowl panel and then topped it off with a low air intake that instantly becomes the focal point that you can't take your eyes off of. While making such a big splash is great, our quest for a superior snorkel went far beyond the visual. We engineered the entire AmFib snorkel inside the Jeep to literally make waves, by designing a system that is over-engineered to be less invasive, performs better and installs easier than any snorkel we've ever built before. The entire system and its components look 'at-home', as though they we're part of the Jeeps original design. But where the rubber really meets the road is where the AmFib Snorkel truly shines…Quickly swap the low air intake for the High Mount Intake and you can defy water crossings with total confidence. Patents Pending and U.S. Patent 8,960,347

• Innovatively Designed To Protect Engine During Water Crossings
• Advanced Snorkel System For 2018-Wrangler JL and Gladiator JT
• Modular Functionality Converts From Low To High Mount Snorkel
• Intrinsic Styling Blends Perfectly w/Factory Trim
• Quick/Easy No-Drill Installation C.A.R.B. Exempt

This Part Fits:

Dusty Trails Rides and Deep Water Fordings. Anyone who takes their rig off-road is likely to encounter these conditions. The new Modular XHD Snorkel System from Rugged Ridge relocates the vulnerable stock air intake location to help reduce dust clogged filters and the risk of hydro-locking your engine. It is also the first snorkel designed with the modular functionality of a Pre-filter Low Mount and Ram High Mount air intake design. Unlike other snorkels, you dont have to give up flexibility for functionality. Not only did we engineer our snorkel to allow the windshield to fold and doors to be removed, we built it for use with our dual battery tray, windshield light bar and windshield light mounting tabs. Because what good is having a snorkel to cross the river, if you have to leave your lights and the dual battery (to power your Winch) on the other side? Note: Windshield light mounting tabs only compatible with low mount. The Modular XHD Snorkel System comes standard with the Pre-filter Low Mount. The Pre-filter Low Mount relocates the air intake to just below the windshield and draws cool air from outside the hot engine compartment. The optional Ram High Mount design allows the air intake to be extended up an additional 21 in. to the top of the windshield. The two air intake mounts are easily interchangeable to give you the modular functionality best suited to your needs. The system is manufactured from premium thermoformed plastic, mandrel bent aluminum and hi-temp silicone connection hoses. Built in manual drain valves channel away excess water to prevent it from entering the intake system. It installs with minor modification to the fender, but without the major cutting and surgery that other kits require. The new lower air cleaner box installs in place of the factory unit, so you dont have to hack and tap. Just attached the factory upper air box, chose from the Pre-filter Low Mount or High Mount design and go! Patents D687,071 and D687,072.

• Works w/Folding Windshield; Removed Door; Windshield Light Bars
• Reduce Risk of Hydro-locking Engine
• Help Reduced Duct Clogged Filters
• Modular Functionality
• Mandrel Bent Aluminum

This Part Fits:

If you're looking for a safe and reliable means of carrying fuel reserves with you on those extended trips, Rugged Ridge Jerry Cans are a great solution no matter what vintage your Jeep is. Features stamped steel construction with a sturdy 3-bar handle, 20-liter capacity (5.28-gallons), a green gloss finish and also includes hinged fuel cap with safety latch and locking pin. Meets DOT regulations for safe transport of fuel in an approved can carrier, such as 12021.62. For flexible spout, use 17722.32. For red Jerry Can, use 17722.31.

• Sturdy/Stamped Steel Construction
• Limited 5 Year Warranty
• Classic Red Color
• Vintage Styling

Jeep moved the exhaust forward on the 2012 Wrangler. Unfortunately, on Jeeps with 2.5 or more of lift that means their front driveshaft is liable to make contact with the exhaust Y-Pipe melting the CV boot and causing the driveshaft to fail prematurely. The Rugged Ridge Exhaust Spacer Kit for 3.6L Wrangler helps move the Y-pipe further back and increases the amount of front suspension travel from 2.5 to over 5.5, thus saving your driveshaft. The spacers install on the flanges between the front headers and Y-pipe.. The great thing is the kit is easy to install and does not require permanent modification to the exhaust. Hardware included. Backed by Rugged Ridges exclusive three-year limited warranty.

• No Permanent Modification to Exhaust
• Limited 5 Year Warranty
• Hardware Included
• Bolt On

This Part Fits:

This 4 switch A-Pillar pod kit from Rugged Ridge includes an A-Pillar pod (#17235.58), 3 marine style 2-position rocker switches (1 each, red, amber & blue), and a combo rocker switch USB connector (#17235.05). Our A-Pillar Pod has the textured molded finish just like the factory plastic pillar cover it replaces. It snaps into place for a factory look.

• Includes Rocker Switches USB switch
• Switch Pod and Switch Kit
• Easy to Install

This Part Fits:

Looking for a handy place to mount your accessory switches that doesnt require cutting or other modifications? The Rugged Ridge A-Pillar Switch Pod has premolded cutouts to allow you to mount up to four aftermarket switches in easy reach on the drivers side A-pillar, and out of the way of the shifter handle. Our Pillar Pod has the textured molded finish just like the factory plastic pillar cover it replaces. It snaps into place just like the OE! Available for both LHD and RHD Jeeps.

• No Cutting or Other Modification
• Includes 4 Switches
• Textured Gray
• Easy Install
• Left Hand

This Part Fits:

The Rugged Ridge Lower Switch Panel allows for practical & convenient installation of electrical switches in 2011-2017 Jeep Wrangler models, regardless of transmission type (Manual or Automatic). This switch panel replaces the lower center dash panel with an injection-molded panel made of an impact-resistant thermoplastic, matching the color and grain of the factory dash for a finished look. Each Switch Panel Kit includes the switch panel and FIVE laser-etched 2-position rocker switches (Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights and Off-Road Lights)

• Limited 5 Year Warranty
• Direct Fit
• OE Style

This Part Fits:

Looking for a handy place to mount your accessory switches that doesn't require cutting or other modifications? This A-Pillar Switch Pod Kit from Outland Automotive has pre-molded cutouts to allow you to mount up to four aftermarket switches, in easy reach, on the driver's side A-pillar, and out of the way of the shifter handle. Our Pillar Pod has the textured molded finish just like the factory cover it replaces. It snaps into place just like the OE for a great fitment! Each kit includes the driver side A-Pillar Switch Pod and FIVE 2-position Etched Rocker Switches (Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights and Off-Road Lights)

• No Cutting or Other Modification
• Includes 4 Switches
• Textured Gray
• Easy Install
• Left Hand

This Part Fits:

Looking for a handy place to mount your accessory switches that doesnt require cutting or other modifications? The Rugged Ridge A-Pillar Switch Pod has premolded cutouts to allow you to mount up to four aftermarket switches in easy reach on the drivers side A-pillar, and out of the way of the shifter handle. Our Pillar Pod has the textured molded finish just like the factory plastic pillar cover it replaces. It snaps into place just like the OE! Available for both LHD and RHD Jeeps.

• No Cutting or Other Modification
• Pre-molded Cutouts
• Textured Gray
• Easy Install
• Left Hand

This Part Fits:

The Rugged Ridge Lower Switch Panel allows for practical & convenient installation of electrical switches in 2011-2017 Jeep Wrangler models, regardless of transmission type (Manual or Automatic). This switch panel replaces the lower center dash panel with an injection-molded panel made of an impact-resistant thermoplastic, matching the color and grain of the factory dash for a finished look. Each panel allows for the addition of up to 5 rocker style switches (available separately) for a variety of fitments. Switches are ergonomically positioned for easy access and effortless operation in your JK, while maintaining the factory correct appearance.

• Limited 5 Year Warranty
• Direct Fit
• OE Style

This Part Fits:

Rugged Ridge Elite Antenna Base allows you to modernize the appearance of one of the most over-looked parts of your Jeep- the antenna! Featuring the same bold styling you've come to expect from our Elite line of accessories, the Elite Billet Antenna Base is built from high-quality die cast aluminum and is offered in a variety of premium finishes: a textured black powder coat, a vibrant red powder coat or a classic raw aluminum finish. Each Elite Billet Antenna Base comes with our versatile 6- in. Reflex antenna, mounting hardware and a gasket to help protect your paints finish from damage. Make your JK truly stand out in a crowd- make it one of the Elite. Patent Pending.

• Incl. Antenna Base/6in Reflex Antenna/Hardware/Gasket
• Bullet Aluminum
• Black

This Part Fits:

Rugged Ridge Elite Antenna Base allows you to modernize the appearance of one of the most over-looked parts of your Jeep- the antenna! Featuring the same bold styling you've come to expect from our Elite line of accessories, the Elite Antenna Base is built from high-quality die cast aluminum and is offered in a variety of premium finishes: a textured black powder coat, a vibrant red powder coat or a classic raw aluminum paintable finish. Each Elite Antenna Base comes with mounting hardware and a gasket to help protect your paints finish from damage. Make your JK truly stand out in a crowd- make it one of the Elite. Patent Pending.

• Incl. Mounting Hardware And Gasket
• Bullet Aluminum
• Black

This Part Fits:

The Rugged Ridge Reflex Antenna implements a shorter antenna design and a flexible material in its construction, making it a practical antenna solution for any Jeep TJ or JK (adapters included). Lower antenna height significantly reduces the risk of the antenna being struck by tree limbs, trail hazards and even those damaging automated car washes. The Reflex Antenna is so resilient that it just bends over to release anything that may become hung on it and then returns to an upright position. Fitted with the proper threaded adapter for the application makes the Reflex Antenna a breeze to install. Available in multiple sizes- 6, 9, 13, 15 and 21- in. lengths.

• Comes With Threaded Adapter
• Flexible Material
• Easy Install
• 21 in. Long

This Part Fits:

The Rugged Ridge Reflex Antenna implements a shorter antenna design and a flexible material in its construction, making it a practical antenna solution for any Jeep TJ or JK (adapters included). Lower antenna height significantly reduces the risk of the antenna being struck by tree limbs, trail hazards and even those damaging automated car washes. The Reflex Antenna is so resilient that it just bends over to release anything that may become hung on it and then returns to an upright position. Fitted with the proper threaded adapter for the application makes the Reflex Antenna a breeze to install. Available in multiple sizes- 6, 9, 13, 15 and 21- in. lengths.

• Works w/OE And Aftermarket Radio Antennas
• High Quality Cast Aluminum Construction
• Exclusive Cutting-Edge Styling
• Easily Paintable Raw Aluminum
• Limited 5 Year Warranty

This Part Fits:

This 13- in. stubby radio antenna from Rugged Ridge fits 07-16 Jeep Wrangler JK/JKU.

• Works w/OE And Aftermarket Radio Antennas
• High Quality Cast Aluminum Construction
• Exclusive Cutting-Edge Styling
• Easily Paintable Raw Aluminum
• Limited 5 Year Warranty

This Part Fits:

The Rugged Ridge Reflex Antenna implements a shorter antenna design and a flexible material in its construction, making it a practical antenna solution for any Jeep TJ or JK (adapters included). Lower antenna height significantly reduces the risk of the antenna being struck by tree limbs, trail hazards and even those damaging automated car washes. The Reflex Antenna is so resilient that it just bends over to release anything that may become hung on it and then returns to an upright position. Fitted with the proper threaded adapter for the application makes the Reflex Antenna a breeze to install. Available in multiple sizes- 6, 9, 13, 15 and 21- in. lengths.

• Works w/OE And Aftermarket Radio Antennas
• High Quality Cast Aluminum Construction
• Exclusive Cutting-Edge Styling
• Vibrant Red Powder Coat Finish
• Limited 5 Year Warranty

This Part Fits: