Fits select 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models (2-door and 4-door).

The Rugged Ridge AmFib Snorkel System for the Jeep Wrangler JK is a departure from traditional, invasive snorkel designs. Engineered to blend seamlessly with the factory exterior, this system replaces the OEM cowl panel with a custom-engineered base that looks like a factory-installed component. The modular design allows you to quickly swap between a Low Mount intake for daily driving and clear visibility, and a High Mount intake to confidently tackle deep water crossings and dusty trails.

This system is over-engineered to improve airflow while protecting your engine from hydro-locking. Unlike many aftermarket snorkels, the AmFib is designed for a less invasive, no-drill installation on the body, preserving your Jeep's sheet metal while providing superior protection. Whether you are navigating heavy rain or fording a stream, the AmFib system ensures your intake remains clear and functional.

• Modular Design: Easily converts between Low Mount and High Mount configurations.
• Factory Integration: Replaces the cowl panel for an intrinsic, flush-mounted look.
• Construction: Durable, high-quality molded plastic designed to withstand off-road abuse.
• Installation: Quick, easy no-drill installation that utilizes existing mounting points.
• Compliance: C.A.R.B. Exempt status for emissions legality.
• MPN: 17756.56
• Patent Info: U.S. Patent 8,960,347

Fits 2018-2021 Jeep Wrangler JL.

The Rugged Ridge AmFib Snorkel Ram Inlet (MPN 17756.37) is a core component of the modular AmFib Snorkel system, designed for enthusiasts who require versatile engine protection. This high-mount ram inlet allows you to quickly adapt your intake for deep water crossings, providing peace of mind when the trail gets wet. It is engineered to sit at a functional height while maintaining a styling profile that complements the factory cowl design for an integrated, original-equipment look.

• Modular Functionality: Quickly swap the low air intake for this High Mount Ram Inlet to defy water crossings with total confidence.
• Seamless Integration: Intrinsic styling blends perfectly with factory trim, appearing as if it were part of the Jeep's original design.
• Installation: Features a quick and easy no-drill installation process that preserves factory body panels.
• CARB Exempt: Emissions-legal design suitable for use in all 50 states.
• Proven Engineering: Utilizes U.S. Patent 8,960,347 for superior air induction performance and safety.
• Manufacturer Part Number: 17756.37

Fits 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models.

The Rugged Ridge AmFib High Mount Snorkel Extension (MPN 17756.36) allows you to quickly convert your modular intake from a low-profile setup to a high-mount intake for deep water crossings. This extension is designed specifically for use with the AmFib Snorkel System base and replaces the low-mount intake cowl when additional clearance is required. It follows the Jeep's A-pillar contours for a clean, integrated look that appears as though it were part of the original vehicle design.

Construction focuses on durability and ease of use, featuring a no-drill installation process that utilizes existing mounting points. This modular functionality gives you the flexibility to run a low-mount intake for daily driving and swap to the high-mount extension when heading into technical off-road environments where engine protection is critical.

• Modular Functionality: Quickly swaps between low and high-mount intake positions
• Engine Protection: Elevates air intake point to defy water crossings with confidence
• Installation: Quick and easy no-drill process
• Regulatory: C.A.R.B. Exempt
• Design: Protected under U.S. Patent 8,960,347
• Requirement: This is the extension ONLY; requires AmFib Snorkel Base (Part Number 17756.35)
• Manufacturer Part Number: 17756.36

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models.

The Rugged Ridge AmFib Snorkel System is a modular induction solution designed for Jeep owners who demand both daily-driver aesthetics and off-road capability. Unlike traditional snorkels that require cutting into the exterior bodywork, the AmFib system replaces the factory cowl panel with a custom-engineered base that integrates seamlessly with the original vehicle lines. This no-drill installation preserves your Jeep's exterior while providing a significantly more efficient air path than the stock intake.

This versatile system features a modular design that allows for quick transitions. Use the Low Mount configuration for a sleek, integrated look during street driving or moderate trails. When approaching deep water crossings, the system can be quickly swapped for the High Mount Intake to protect your engine from hydrolocking. The internal ducting is over-engineered to ensure maximum airflow and performance across all terrains.

• Modular Versatility: Includes both Low Mount and High Mount intake components.
• No-Drill Installation: Bolts directly to factory mounting points for a less invasive setup.
• Precision Integration: Contoured base matches the OE cowl panel for an at-home, factory appearance.
• Engine Protection: Elevates air intake to a safer position for water crossings and dusty environments.
• Compliance: C.A.R.B. Exempt and protected by U.S. Patent 8,960,347.
• Manufacturer Part Number: 17756.31

Fits 2007-2018 Jeep Wrangler and Wrangler JK models equipped with the 3.6L or 3.8L engine.

Protect your engine from the hazards of deep water crossings and dusty trails with the Rugged Ridge XHD Modular Snorkel System. By relocating the intake point from the vulnerable factory position to a higher, protected location, this kit significantly reduces the risk of hydro-locking and prevents dust from prematurely clogging your air filter. Unlike traditional one-piece snorkels, the XHD features a modular design that allows you to switch between the included Pre-filter Low Mount and an optional Ram High Mount (sold separately).

This system is engineered for the real-world off-roader. It maintains full functionality for folding the windshield and removing the doors, and it is compatible with Rugged Ridge dual battery trays and windshield light bars. The assembly is constructed from premium thermoformed plastic, mandrel-bent aluminum, and high-temperature silicone connection hoses for long-term durability. Built-in manual drain valves ensure any moisture entering the intake is safely channeled away before reaching the engine.

• Relocates intake to reduce hydro-lock risk and dust intake
• Modular design includes the Pre-filter Low Mount (sits just below windshield)
• Constructed from mandrel-bent aluminum and thermoformed plastic
• Includes hi-temp silicone hoses and manual water drain valves
• Direct-fit lower air box replaces factory unit (no major cutting required)
• Compatible with folding windshields and removable doors
• U.S. Patents: D687,071 and D687,072
• Manufacturer Part Number: 17756.21

The Rugged Ridge 20-liter (5.28-gallon) Jerry Can provides a reliable and secure solution for carrying fuel reserves during extended off-road excursions. Built from heavy-duty stamped steel, this canister features a classic red gloss finish and a reinforced three-bar handle designed for easy transport and durability in harsh environments.

For maximum safety, each can is equipped with a hinged fuel cap that includes an integrated safety latch and a locking pin to prevent accidental openings. This unit meets DOT regulations for the safe transport of fuel when used in an approved can carrier (such as Rugged Ridge 12021.62).

• Capacity: 20 Liters (5.28 Gallons)
• Construction: Sturdy stamped steel with vintage styling
• Safety: Hinged fuel cap with safety latch and locking pin
• Finish: Durable red gloss powder coat
• MPN: 17722.31
• Fitment: Universal for use with approved fuel can carriers
• Requirements: Requires flexible spout 17722.32 for pouring (sold separately)
• Warranty: Limited 5-year warranty

Fits 2012-2018 Jeep Wrangler and Wrangler JK models equipped with the 3.6L engine.

The Rugged Ridge Exhaust Spacer Kit solves a critical clearance issue found on 2012-2018 Jeep Wranglers with 2.5 inches or more of suspension lift. In these configurations, the front driveshaft often makes contact with the exhaust Y-pipe during suspension cycling, which can melt the CV boot and lead to premature driveshaft failure. By installing these spacers between the front headers and the Y-pipe, you effectively relocate the exhaust rearward to clear the path of the drivetrain.

This simple bolt-on solution increases available front suspension travel from the factory-limited 2.5 inches to over 5.5 inches without requiring permanent modifications to your exhaust system. The kit includes all necessary hardware for a straightforward installation that preserves the integrity of your factory components.

• Prevents driveshaft contact with the Y-pipe on lifted vehicles
• Accommodates suspension travel for lifts over 5.5 inches
• No permanent modifications, cutting, or welding required
• Direct bolt-on installation at the exhaust flanges
• Manufacturer Part Number: 17606.76
• Backed by a Limited 5-Year Warranty

Includes: Exhaust spacers and installation hardware.

Fits 2011-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited editions.

The Rugged Ridge A-Pillar Pod Kit (MPN 17235.98) provides a professional-grade solution for managing auxiliary lighting and accessories. Designed to replace the factory plastic pillar cover, this pod features a textured molded finish that matches the original equipment (OE) interior perfectly. The snap-in design ensures a secure fit onto factory mounting points, maintaining a clean dashboard while keeping controls within arm's reach.

This comprehensive kit includes a 4-position pillar pod pre-populated with high-quality components for both power management and device charging. The marine-style rocker switches are built for durability in open-cabin environments, offering clear visual feedback through distinct color coding.

• Includes A-Pillar Pod (#17235.58) with OE-matched texture
• Three 2-position marine-style rocker switches (1 Red, 1 Amber, 1 Blue)
• Dual-port USB combo rocker switch connector (#17235.05)
• Direct snap-in replacement for the driver-side factory pillar trim
• No drilling or heavy modification required for installation

Fits 2011-2018 Jeep Wrangler JK and Wrangler Unlimited models.

The Rugged Ridge A-Pillar Switch Pod offers a clean, integrated solution for mounting accessory switches in your Jeep Wrangler JK. Designed specifically for Left-Hand Drive (LHD) models, this pod replaces your factory driver-side A-pillar trim with a custom-molded piece that accommodates up to four rocker switches. By positioning your controls on the A-pillar, they remain within easy reach while staying clear of the shifter handle and dashboard.

Installation is straightforward and requires no cutting, drilling, or permanent interior modifications. This pillar pod is engineered to snap directly into the factory mounting points, mimicking the OE fit and finish. The textured surface is designed to match your Jeep's factory plastic trim for a seamless, professional appearance.

• Mounting Location: Driver Side A-Pillar (LHD)
• Switch Capacity: 4 Switches
• Includes: 4 Switches included in kit
• Finish: Textured Black/Gray
• Installation: Snap-in direct replacement for OE trim
• Manufacturer Part Number: 17235.96

Fits select 2011-2018 Jeep Wrangler, Wrangler Unlimited, and Wrangler JK models regardless of transmission type.

The Rugged Ridge Lower Switch Panel provides a clean, professional solution for managing auxiliary electrical accessories. This injection-molded panel replaces the factory lower center dash component, maintaining the original interior aesthetics with a matched color and grain finish. Constructed from impact-resistant thermoplastic, it is designed to withstand the rigors of off-road use while providing easy access to your controls.

This comprehensive kit includes five laser-etched 2-position rocker switches, each featuring specific off-road icons for quick identification. The panel is a direct-fit replacement that requires no permanent vehicle modification, ensuring an OE-style installation for both manual and automatic applications.

• Manufacturer Part Number: 17235.73
• Material: Injection-molded impact-resistant thermoplastic
• Finish: Factory-matched color and grain
• Included Switches: Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights, and Off-Road Lights
• Switch Type: 5 Laser-etched 2-position rocker switches
• Installation: Replaces factory lower dash panel; direct fit
• Warranty: Limited 5-Year Warranty

Fits select 2011-2018 Jeep Wrangler and Wrangler Unlimited JK models including Rubicon, Sahara, and Sport (LHD).

The Rugged Ridge Etched A-Pillar Switch Pod Kit (MPN 17235.71) provides a clean, factory-integrated solution for managing auxiliary electronics. This kit replaces the driver-side A-pillar trim with a textured gray pod that matches the original interior finish. By positioning switches on the pillar, it keeps controls within easy reach while ensuring they do not interfere with the shifter or driver visibility.

Installation is straightforward and non-destructive, as the pod snaps into the factory mounting points without the need for cutting or drilling. The kit includes five 2-position etched rocker switches, allowing you to choose the configuration that best suits your off-road lighting and accessory needs.

• Positions up to four switches on the driver side A-pillar
• Textured gray finish matches OE interior components
• Direct-fit installation utilizing factory mounting clips
• Includes five etched rocker switches: Zombie Lights, Light Bar Lights, Sasquatch Lights, Rock Lights, and Off-Road Lights
• Designed for Left Hand Drive (LHD) vehicles only
• Manufacturer Part Number: 17235.71

Fits 2011-2018 Jeep Wrangler and Wrangler JK models (LHD). This Rugged Ridge A-Pillar Switch Pod provides a clean, factory-style mounting solution for up to four aftermarket rocker switches. Designed to replace the original driver-side A-pillar trim, it positions your accessory controls within easy reach while keeping them clear of the gear shifter.

Constructed from injection-molded plastic, this pillar pod features a textured finish that matches the factory interior trim for a seamless look. Installation is straightforward and requires no cutting, drilling, or permanent modifications; the unit snaps directly into the original equipment (OE) mounting points just like the factory panel it replaces.

• Positions up to four switches on the driver-side A-pillar
• Textured black finish matches factory OE interior trim
• Direct replacement for factory pillar cover
• Snap-in installation using factory mounting points
• No cutting or drilling required for installation
• Designed specifically for Left Hand Drive (LHD) models
• Manufacturer Part Number: 17235.58

Fits select 2007-2018 Jeep Wrangler and Wrangler Unlimited JK/JKU models. Add centralized control for your off-road lighting and electronic accessories with the Rugged Ridge Lower Console Switch Panel. This panel replaces the lower center dash trim, providing an ergonomic mounting point for additional controls while maintaining a factory-integrated appearance.

Constructed from injection-molded, impact-resistant thermoplastic, this panel is engineered to match the color and grain of the factory interior. It is compatible with both manual and automatic transmission models and accommodates up to five rocker-style switches in a location that is easy to reach during trail use.

• Manufacturer Part Number: 17235.54
• Capacity: Holds up to 5 rocker switches (sold separately)
• Material: Impact-resistant thermoplastic
• Finish: OE-style textured black grain
• Installation: Replaces factory lower center dash panel
• Compatibility: Fits manual and automatic transmissions
• Warranty: Limited 5-Year Warranty

Fits select 2007-2025 Jeep Wrangler JK, JL, and Gladiator JT models.

The Rugged Ridge Elite Antenna Base replaces the often-overlooked factory plastic component with a modern, rugged aesthetic. Engineered from high-quality die-cast aluminum, this base provides superior durability compared to OE hardware. It is finished in a textured black powder coat to resist corrosion and match common aftermarket trim finishes. This kit includes the Rugged Ridge 6-inch Reflex antenna, which offers a lower profile than the factory mast while maintaining signal reception.

• Replaces factory antenna base with high-quality die-cast aluminum construction
• Finished in a durable textured black powder coat for long-term weather resistance
• Includes a flexible 6-inch Reflex antenna mast to prevent snagging on trail obstacles
• Complete kit includes mounting hardware and a protective gasket to preserve paint finish
• Patent-pending design specific to Jeep Wrangler and Gladiator mounting points
• Manufacturer Part Number: 17212.41

Fits select 2007-2025 Jeep Wrangler JK, Wrangler JL, and Gladiator JT.

The Rugged Ridge Elite Antenna Base allows you to modernize one of the most frequently overlooked exterior components of your Jeep. Part of the Elite line of accessories, this base replaces the standard factory unit with a bold, contemporary design. It is manufactured from premium die-cast aluminum to ensure long-term durability and a precise fit against the body panel.

This kit includes a protective gasket to prevent metal-on-paint contact, shielding your vehicle's finish from scratches and corrosion. The textured black powder coat provides a rugged, matte look that stands up to the elements and off-road debris. Installation is straightforward using the provided hardware, making it a functional and aesthetic upgrade for any late-model Jeep.

• Constructed from high-quality die-cast aluminum for maximum durability
• Protective textured black powder coat finish
• Includes rubber gasket to protect factory paint finish
• Comes complete with required mounting hardware
• Direct-fit replacement for the factory antenna base
• Manufacturer Part Number: 17212.13

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL), 2020-2023 Jeep Gladiator (JT), and 2021-2022 Ford Bronco models. This antenna is designed to replace factory masts that are prone to bending or snapping during off-road use or in automated car washes.

The Rugged Ridge Reflex Antenna features a 21-inch design constructed from a highly flexible material. This allows the antenna to bend when struck by tree limbs or other trail hazards, then immediately return to its upright position without permanent deformation. The shorter profile significantly reduces the leverage applied to the antenna base compared to a standard OE mast, protecting your vehicle's mounting point.

• Length: 21 inches
• Material: Resilient flexible composite
• Included: Threaded adapters for multiple vehicle applications
• Installation: Direct bolt-on to factory antenna base
• Manufacturer Part Number: 17212.12

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL) and Gladiator (JT).

The Rugged Ridge Reflex Antenna provides a practical, trail-ready alternative to rigid factory masts. Featuring a 15-inch flexible design, this antenna is built to withstand impacts from low-hanging tree limbs, brush, and automated car wash brushes. The resilient material allows the antenna to bend under pressure and immediately return to its upright position, preventing the snapping or bending common with OE units.

Installation is straightforward using the included threaded adapters, ensuring a secure fit for TJ, JK, JL, and JT models. This antenna maintains radio performance while offering a sleek, low-profile look that complements the Jeep's rugged aesthetic.

• Flexible construction bends to release hazards and returns to upright position
• 15-inch height significantly reduces the risk of impact damage
• Cast aluminum construction for long-lasting durability
• Raw finish is easily paintable to match your vehicle
• Includes necessary threaded adapters for factory mounting points
• Works with both OE and aftermarket radio antennas
• Manufacturer Part Number: 17212.11
• Backed by a Limited 5-Year Warranty

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL), Gladiator (JT), and 2021-2022 Ford Bronco.

The Rugged Ridge Reflex 13-inch antenna provides a sleek, low-profile alternative to long, flexible factory radio antennas that often snag on low-hanging branches or garage doors. This stubby antenna is designed to maintain radio reception while offering a much cleaner aesthetic for your off-road vehicle. Constructed from cast aluminum, it features a raw finish that can be easily painted to match your vehicle's body color or left as-is for a rugged look.

• Length: 13 inches
• Material: High-quality cast aluminum construction
• Finish: Raw aluminum (paintable)
• Compatibility: Works with both OE and aftermarket radio antenna bases
• Installation: Threads directly into factory mounting location
• Manufacturer Part Number: 17212.10
• Warranty: Limited 5-year warranty

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL), 2020-2023 Jeep Gladiator (JT), and 2021-2022 Ford Bronco.

The Rugged Ridge Reflex Antenna provides a practical, low-profile alternative to long factory masts that are prone to snapping. At 9 inches tall, this antenna significantly reduces the risk of impact from low-hanging tree limbs, trail hazards, and automated car washes. Its resilient, flexible design allows the antenna to bend under pressure and instantly return to its upright position without permanent deformation.

Built for durability and visual impact, this Reflex Antenna features high-quality cast aluminum construction with a vibrant red powder coat finish. The installation is straightforward and tool-simple, utilizing the included threaded adapters to ensure a precise fit onto your specific vehicle's factory antenna base.

• Manufacturer Part Number: 17212.07
• Length: 9 Inches
• Construction: Flexible cast aluminum
• Finish: Red powder coat
• Warranty: Limited 5-year warranty
• Compatibility: Works with OE and most aftermarket radio antenna bases

The Rugged Ridge Reflex Antenna provides a low-profile, 6-inch solution for select 1997-2023 Jeep Wrangler (TJ, JK, JL), 2020-2023 Gladiator (JT), and 2021-2022 Ford Bronco models. Designed to replace the cumbersome factory whip antenna, this shorter design significantly reduces the risk of being snagged by low-hanging tree limbs, trail hazards, or automated car wash brushes.

Engineered for durability on and off the road, the Reflex Antenna is constructed from cast aluminum and finished in a rugged textured black powdercoat. Its unique flexible design allows it to bend when struck by an object and immediately return to its upright position. Installation is straightforward using the included application-specific threaded adapters that bolt directly to the factory antenna base.

• Fits 1997-2023 Jeep and 2021-2022 Ford Bronco models
• 6-inch height improves clearance on tight trails and in garages
• Resilient cast aluminum construction with flexible memory
• Textured black powdercoat finish for corrosion resistance
• Includes threaded adapters for OE and aftermarket radio bases
• Manufacturer Part Number: 17212.06
• Limited 5-Year Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (including Base, Laredo, Renegade, Golden Eagle, Golden Hawk, SL, and SR submodels).

The Rugged Ridge Braided Stainless Steel Rear Brake Hose is a direct-replacement performance upgrade designed to solve the common issue of "spongy" pedal feel caused by OE rubber hose expansion. Built for the rigors of off-road use, this hose features a chemically resistant Teflon inner liner encased in a tough stainless steel braided outer jacket that resists abrasion and puncture from trail hazards.

This rear brake hose provides an additional 4 inches of length over factory components, making it an essential requirement for vehicles equipped with suspension lift kits. By maintaining consistent line pressure and offering increased reach, it ensures reliable braking performance and safety in extreme articulation scenarios. This component meets or exceeds DOT MVSS-106 regulations for highway use.

• Manufacturer Part Number: 16735.04
• Construction: Braided Stainless Steel outer with Teflon inner hose
• Extended Length: +4 inches over original equipment
• Safety Standard: Meets or exceeds DOT MVSS-106
• Configuration: Rear position (Single)
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited (Rubicon, Sahara, Sport, and X).

Upgrade your braking response and durability with the Rugged Ridge Braided Stainless Steel Brake Hose Kit. These lines are engineered to replace factory rubber hoses that can swell under pressure, causing a spongy pedal feel. By utilizing a Teflon inner hose wrapped in a tough stainless steel braided jacket, this kit provides a firmer, more consistent pedal and superior protection against trail debris and hazards.

Designed specifically for lifted Jeeps, these hoses offer 4 inches of additional length over original equipment, ensuring proper clearance and preventing line tension during full suspension articulation. This kit (MPN 16734.10) is sold as a pair and meets or exceeds DOT MVSS-106 safety regulations for street and trail use.

• Construction: Braided stainless steel outer cover with Teflon inner hose
• Extended Length: +4 inches over OE for lifted applications
• Compliance: Meets or exceeds DOT MVSS-106 regulations
• Finish: Corrosion-resistant materials
• Quantity: Includes one pair of hoses
• Manufacturer Part Number: 16734.10
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 2018-2020 Jeep Wrangler JL, JLU, and 2020 Jeep Gladiator JT.

Secure your aftermarket or factory wheels with this Rugged Ridge Wheel Lock Nut Set. Engineered to address the common risk of wheel theft, this kit provides a critical layer of security for Jeep owners running premium wheel and tire packages. Each locking nut is designed with the correct M14-1.5 thread pitch and a factory-style conical seat, ensuring a precise fit and proper torque retention for both OE and compatible aftermarket wheels.

Manufactured from hardened steel for superior strength and resistance to rounded edges, these locks are finished in a durable black coating that resists corrosion while blending seamlessly with dark-finish wheels. This comprehensive set includes five locking nuts—covering all four hubs plus the exterior-mounted spare—and the specific security key required for installation and removal.

• Manufacturer Part Number: 16715.34
• Thread Pitch: M14-1.5
• Seat Type: Conical
• Material: Hardened Steel
• Finish: Black
• Kit Contents: 5 Locking Lug Nuts, 1 Security Key
• Warranty: Limited 5-Year Warranty

Fits select 1966-2018 Jeep Wrangler, Cherokee, Grand Cherokee, CJ, Liberty, Comanche, and J-Series models with Dana 30 front axles.

Protect your factory differential cover from trail damage and impact with the Rugged Ridge Differential Skid Plate. Engineered to follow the specific contours of the stock Dana 30 housing, this heavy-duty shield provides a smooth surface that helps your vehicle slide over obstacles rather than getting hung up on the differential. It is constructed from 3/16-inch thick steel with a resilient black powder-coated finish for maximum durability and corrosion resistance.

As an Authentic Jeep Licensed product, this skid plate features the Jeep logo stamped directly into the face. The kit includes all necessary replacement mounting hardware and instructions for a secure installation using the factory differential mounting points.

• Manufacturer Part Number: 16597.30
• Material: 3/16-inch heavy-duty steel
• Finish: Durable black powder coat
• Axle Application: Dana 30
• Fitment: Designed for use with factory differential covers
• Authentic Jeep Licensed Product with stamped logo
• Includes replacement mounting hardware and instructions