Increase the signal range and transmission clarity of your handheld communications with the Rugged Radios GMRS-RH-MAG Magnetic Mount Antenna. Specifically engineered for use with the Rugged GMR2 PLUS handheld GMRS radio, this external antenna setup allows you to move your signal point outside the vehicle cab, bypassing the interference often caused by metal roofs and roll cages.

The heavy-duty magnetic base provides a secure, non-permanent attachment to any flat steel surface, making it an essential upgrade for UTVs, trucks, and chase vehicles. By replacing the standard handheld antenna with this externally mounted solution, you achieve better line-of-sight performance and more consistent communication in remote off-road environments.

• Specifically tuned for the Rugged GMR2 PLUS handheld radio
• High-strength magnetic base for secure roof or hood mounting
• Significant range improvement over standard handheld antennas
• Rugged construction built for off-road vibration and debris
• Manufacturer Part Number: GMRS-RH-MAG

The Torque Solution Premium Stubby Billet Antenna (TS-BA-BL5-P) provides a sleek, low-profile alternative to unsightly and fragile factory whip antennas. Designed for select Mitsubishi, Honda, Ford, and Subaru applications, this antenna eliminates the risk of catching on low-hanging garage doors or breaking in automated car washes while maintaining a clean, modern aesthetic.

• CNC machined from high-grade billet aluminum for maximum durability
• Low-profile "stubby" design reduces wind resistance and prevents breakage
• Direct replacement for the factory antenna mast on select vehicles
• Finished for high resistance to corrosion and weathering
• Simple, tool-free installation into the factory base
• Manufacturer Part Number: TS-BA-BL5-P

The Rugged Radios POINT5 is a high-performance GMRS and UHF tuned whip antenna specifically engineered for applications lacking a standard metal mounting surface. Utilizing a No Ground Plane (NGP) design, this antenna provides reliable long-range communication on vehicles with fiberglass bodies, composite roofs, or open tube chassis configurations where traditional antennas often fail to perform.

• Tuned for optimal resonance across GMRS and UHF frequency ranges
• No Ground Plane (NGP) architecture eliminates the need for a metal base for signal reflection
• Flexible whip construction designed to withstand the vibrations and impacts of off-road environments
• Ideal for UTVs, sand rails, trophy trucks, and overland vehicles
• Manufacturer Part Number: POINT5

Fits select 1946-1995 Jeep CJ, Wrangler, Scrambler, and Willys models.

Restore your vehicle's factory aesthetics and radio reception with the Rugged Ridge Chrome Antenna Mast. Designed as a direct OE-style replacement, this 32.5-inch mast features a high-luster chrome finish that replicates the original equipment for a period-correct appearance. Whether you are finishing a restoration or replacing a snapped factory mast, this component provides the precise fitment needed for vintage and classic Jeep applications.

Installation is a simple bolt-on process, mounting directly to the factory antenna base without modifications. Constructed for durability in both daily driving and off-road environments, this mast is engineered to withstand the elements while maintaining a secure connection for clear signal transmission.

• Length: 32.5 Inches
• Finish: Chrome Plated
• Design: OE Style Replacement
• Installation: Direct Bolt-On
• Manufacturer Part Number: 17212.01
• Warranty: Limited 5-Year Warranty

The Rugged Radios Stealth Tuned Low Profile VHF Antenna (STEALTH-VHF) is engineered for high-performance communication in environments where mounting space is limited and clearance is critical. Designed as a non-ground plane (NGP) solution, this antenna does not require a large metal surface to function, making it the ideal choice for installation on fiberglass roofs, composite body panels, or tube-frame structures.

The low-profile design significantly reduces the risk of the antenna catching on low-hanging branches or obstacles during trail use, while the tuned VHF construction ensures reliable signal transmission and reception. This antenna is a direct solution for maintaining clear communications without the height or ground-plane requirements of traditional whip antennas.

• Manufacturer Part Number: STEALTH-VHF
• Frequency Range: VHF
• Technology: Non-Ground Plane (NGP) tuned design
• Profile: Compact, low-profile housing for maximum clearance
• Mounting: Compatible with standard NMO-style connectors

The Rugged Radios Stealth Tuned Low Profile Antenna (STEALTH-UHF) provides a discreet, high-performance communication solution for GMRS and UHF radio systems. Engineered with a non-ground plane (NGP) architecture, this antenna delivers reliable signal transmission and reception without requiring a large metal surface to act as a ground plane. This makes it a primary choice for mounting on composite roofs, plastic body panels, or roll cages where traditional antennas might struggle with signal loss.

Its ultra-low-profile design significantly reduces the risk of damage from low-hanging branches, trail obstacles, or garage clearances. The antenna comes pre-tuned for GMRS and UHF frequencies to ensure maximum efficiency and clear voice clarity for off-road racing, recreational trail riding, or utility applications.

• Optimized for GMRS and UHF frequency ranges
• Non-ground plane design enables mounting on any surface
• Low-profile "stealth" footprint for superior clearance and durability
• Pre-tuned for peak performance and easy installation
• Manufacturer Part Number: STEALTH-UHF

Extend your communication reach with the Rugged Radios Long Range Antenna, specifically engineered for the GMR2 PLUS GMRS handheld radio. This high-gain antenna is tuned to optimize signal performance, providing significantly better transmit and receive range compared to the factory-standard antenna.

Built to handle the rigors of off-road use, this antenna features a flexible yet durable construction that resists damage from vibration and impacts. It is an essential upgrade for trail leaders and race teams who require consistent signal clarity across challenging terrain.

• Specifically tuned for GMRS frequencies to maximize signal efficiency
• Compatible with Rugged Radios GMR2 PLUS handhelds
• Durable, flexible whip design built for off-road environments
• Direct replacement for the stock antenna with SMA-Male connector
• Manufacturer Part Number: GMRS-SMA-M

Fits select 2007-2023 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD (6.6L).

Replace the tall, flexible factory whip antenna on your GM truck with the low-profile Wehrli Billet TIG Torch Stubby Antenna. Inspired by the clean aesthetics of a TIG welding torch cap, this antenna provides a significant visual upgrade for owners looking to streamline their truck's silhouette. CNC machined from high-quality billet aluminum and finished in a durable Gloss Black powder coat, this antenna is built to withstand the elements while maintaining a sleek look.

Installation is straightforward and can be completed in minutes using basic hand tools. While this antenna is fully compatible with Bluetooth audio and satellite radio services, please note that the reduced height may result in decreased AM/FM radio reception compared to the much longer factory mast.

• Design: CNC Machined Billet Aluminum
• Style: TIG Torch Cap Profile
• Finish: Gloss Black Powder Coat
• Compatibility: Satellite Radio and Bluetooth Audio compatible
• Installation: Direct-fit replacement for OEM aerial antenna
• Origin: Made in USA
• Manufacturer Part Number: WCF100041-GB

Fits select 2010-present Ford Mustang and 2005-present Mazda MX-5 Miata models.

The Torque Solution Premium Billet Short Antenna is a low-profile replacement for the unsightly factory whip antenna. This CNC-machined component offers a sleek, modern aesthetic while maintaining signal reception for your vehicle's radio. Designed for a perfect fit, it replaces the long OEM antenna mast to provide a more streamlined appearance without the risk of bending or breaking in car washes or under low clearances.

• CNC machined from high-grade billet aluminum for durability
• Direct-fit screw-on replacement for the factory mounting point
• Low-profile design eliminates the tall factory whip antenna
• Corrosion-resistant finish for long-lasting appearance
• Manufacturer Part Number: TS-BA-BL14-P

Installation is straightforward and requires no tools; simply unscrew the original antenna and thread the Torque Solution billet antenna into the factory base.

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models including Rubicon, Sahara, Sport, and X trims.

The Rugged Ridge CB Radio and Antenna Mount Kit provides a comprehensive solution for mounting communication gear in your Jeep. This kit includes two specific brackets designed for durability and accessibility. The CB radio mount installs directly over the rearview mirror, keeping your radio within easy reach while utilizing a discrete mounting point. For the exterior, the antenna bracket installs on the factory spare tire carrier, positioned to the left of center for optimal clearance.

Both brackets are manufactured from heavy-duty steel and finished in a resilient black powder coat to resist corrosion and trail wear. This kit includes the necessary mounting hardware for a straightforward installation using factory mounting points.

• Includes over-mirror CB radio mount and spare tire carrier antenna mount
• Constructed from durable black powder-coated steel
• Maintains easy access to radio controls
• Utilizes factory mounting locations for simplified installation
• Includes all necessary mounting hardware
• Manufacturer Part Number: 11503.96

Fits select Ford, Kia, Mazda, Nissan, and Scion models.

The Torque Solution Billet Mini Stubby Antenna is designed to replace your vehicle's tall, flexible factory whip antenna with a sleek, low-profile alternative. Precision-machined for a direct-fit application, this stubby antenna provides a significantly cleaner roofline aesthetic while eliminating the risk of damage or bending commonly encountered in automated car washes. Its robust construction ensures long-lasting durability without sacrificing the functionality of your radio reception.

• CNC machined billet aluminum construction
• Low-profile "stubby" design for improved vehicle aesthetics
• Easy screw-on installation into the factory antenna base
• Replaces unsightly OE whip antennas
• Manufacturer Part Number: TS-BA-BL19-P

The Torque Solution Black Billet Shorty Antenna offers a clean, low-profile alternative to the long, unsightly factory whip antennas found on many Audi and Volkswagen vehicles. CNC machined from high-grade billet aluminum, this antenna is designed to provide a sleek, streamlined look without sacrificing the durability required for an exterior component.

The antenna features a hard-anodized black finish to resist fading and corrosion from UV exposure and harsh weather. Installation is a straightforward screw-on process that utilizes the factory mounting point, making it a simple but effective aesthetic upgrade for your vehicle's roofline.

• CNC machined from 6061 billet aluminum
• Durable hard-anodized black finish
• Low-profile design avoids interference with garage doors
• Simple screw-on installation replaces the OE whip antenna
• Manufacturer Part Number: TS-BA-BL15

The Torque Solution Premium Super Stubby Billet Antenna (TS-BA-BL12-P) provides a clean, low-profile alternative to long, flexible factory whip antennas. Designed for enthusiasts who want to modernize their vehicle's silhouette, this antenna eliminates the common problem of antennas hitting garage doors or snagging in car washes.

• Fits select Mitsubishi, Honda, Ford, and Subaru models with factory screw-on antenna bases
• CNC machined from high-grade billet material for maximum durability
• Precision threaded for a direct-replacement, screw-on installation
• Low-profile "Super Stubby" design maintains sleek vehicle lines
• Resistant to corrosion and environmental degradation
• Manufacturer Part Number: TS-BA-BL12-P

Fits 2008-2014 Mitsubishi Evolution X and Subaru WRX STI.

Eliminate the oversized factory whip antenna and clean up your vehicle's profile with the Torque Solution Super Shorty Billet Antenna. Standing just 2 inches tall, this low-profile replacement provides a sleek, modern appearance while removing the vulnerable "RC car" look of the original equipment. The compact design is significantly less prone to damage from low-clearance garage doors or automatic car washes.

This antenna is CNC machined from billet material for long-lasting durability and a precise fit. It is designed as a direct screw-on replacement that utilizes your factory antenna base, making installation a simple, tool-free process that can be completed in seconds.

• Height: 2 inches
• Material: CNC machined billet construction
• Installation: Direct screw-on to factory base
• Manufacturer Part Number: TS-BA-BL10-P

Fits select 2007-2025 Jeep Wrangler JK, JL, and Gladiator JT models.

The Rugged Ridge Elite Antenna Base replaces the often-overlooked factory plastic component with a modern, rugged aesthetic. Engineered from high-quality die-cast aluminum, this base provides superior durability compared to OE hardware. It is finished in a textured black powder coat to resist corrosion and match common aftermarket trim finishes. This kit includes the Rugged Ridge 6-inch Reflex antenna, which offers a lower profile than the factory mast while maintaining signal reception.

• Replaces factory antenna base with high-quality die-cast aluminum construction
• Finished in a durable textured black powder coat for long-term weather resistance
• Includes a flexible 6-inch Reflex antenna mast to prevent snagging on trail obstacles
• Complete kit includes mounting hardware and a protective gasket to preserve paint finish
• Patent-pending design specific to Jeep Wrangler and Gladiator mounting points
• Manufacturer Part Number: 17212.41

Fits select 2007-2025 Jeep Wrangler JK, Wrangler JL, and Gladiator JT.

The Rugged Ridge Elite Antenna Base allows you to modernize one of the most frequently overlooked exterior components of your Jeep. Part of the Elite line of accessories, this base replaces the standard factory unit with a bold, contemporary design. It is manufactured from premium die-cast aluminum to ensure long-term durability and a precise fit against the body panel.

This kit includes a protective gasket to prevent metal-on-paint contact, shielding your vehicle's finish from scratches and corrosion. The textured black powder coat provides a rugged, matte look that stands up to the elements and off-road debris. Installation is straightforward using the provided hardware, making it a functional and aesthetic upgrade for any late-model Jeep.

• Constructed from high-quality die-cast aluminum for maximum durability
• Protective textured black powder coat finish
• Includes rubber gasket to protect factory paint finish
• Comes complete with required mounting hardware
• Direct-fit replacement for the factory antenna base
• Manufacturer Part Number: 17212.13

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL), 2020-2023 Jeep Gladiator (JT), and 2021-2022 Ford Bronco models. This antenna is designed to replace factory masts that are prone to bending or snapping during off-road use or in automated car washes.

The Rugged Ridge Reflex Antenna features a 21-inch design constructed from a highly flexible material. This allows the antenna to bend when struck by tree limbs or other trail hazards, then immediately return to its upright position without permanent deformation. The shorter profile significantly reduces the leverage applied to the antenna base compared to a standard OE mast, protecting your vehicle's mounting point.

• Length: 21 inches
• Material: Resilient flexible composite
• Included: Threaded adapters for multiple vehicle applications
• Installation: Direct bolt-on to factory antenna base
• Manufacturer Part Number: 17212.12

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL) and Gladiator (JT).

The Rugged Ridge Reflex Antenna provides a practical, trail-ready alternative to rigid factory masts. Featuring a 15-inch flexible design, this antenna is built to withstand impacts from low-hanging tree limbs, brush, and automated car wash brushes. The resilient material allows the antenna to bend under pressure and immediately return to its upright position, preventing the snapping or bending common with OE units.

Installation is straightforward using the included threaded adapters, ensuring a secure fit for TJ, JK, JL, and JT models. This antenna maintains radio performance while offering a sleek, low-profile look that complements the Jeep's rugged aesthetic.

• Flexible construction bends to release hazards and returns to upright position
• 15-inch height significantly reduces the risk of impact damage
• Cast aluminum construction for long-lasting durability
• Raw finish is easily paintable to match your vehicle
• Includes necessary threaded adapters for factory mounting points
• Works with both OE and aftermarket radio antennas
• Manufacturer Part Number: 17212.11
• Backed by a Limited 5-Year Warranty

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL), Gladiator (JT), and 2021-2022 Ford Bronco.

The Rugged Ridge Reflex 13-inch antenna provides a sleek, low-profile alternative to long, flexible factory radio antennas that often snag on low-hanging branches or garage doors. This stubby antenna is designed to maintain radio reception while offering a much cleaner aesthetic for your off-road vehicle. Constructed from cast aluminum, it features a raw finish that can be easily painted to match your vehicle's body color or left as-is for a rugged look.

• Length: 13 inches
• Material: High-quality cast aluminum construction
• Finish: Raw aluminum (paintable)
• Compatibility: Works with both OE and aftermarket radio antenna bases
• Installation: Threads directly into factory mounting location
• Manufacturer Part Number: 17212.10
• Warranty: Limited 5-year warranty

Fits select 1997-2023 Jeep Wrangler (TJ, JK, JL), 2020-2023 Jeep Gladiator (JT), and 2021-2022 Ford Bronco.

The Rugged Ridge Reflex Antenna provides a practical, low-profile alternative to long factory masts that are prone to snapping. At 9 inches tall, this antenna significantly reduces the risk of impact from low-hanging tree limbs, trail hazards, and automated car washes. Its resilient, flexible design allows the antenna to bend under pressure and instantly return to its upright position without permanent deformation.

Built for durability and visual impact, this Reflex Antenna features high-quality cast aluminum construction with a vibrant red powder coat finish. The installation is straightforward and tool-simple, utilizing the included threaded adapters to ensure a precise fit onto your specific vehicle's factory antenna base.

• Manufacturer Part Number: 17212.07
• Length: 9 Inches
• Construction: Flexible cast aluminum
• Finish: Red powder coat
• Warranty: Limited 5-year warranty
• Compatibility: Works with OE and most aftermarket radio antenna bases

The Rugged Ridge Reflex Antenna provides a low-profile, 6-inch solution for select 1997-2023 Jeep Wrangler (TJ, JK, JL), 2020-2023 Gladiator (JT), and 2021-2022 Ford Bronco models. Designed to replace the cumbersome factory whip antenna, this shorter design significantly reduces the risk of being snagged by low-hanging tree limbs, trail hazards, or automated car wash brushes.

Engineered for durability on and off the road, the Reflex Antenna is constructed from cast aluminum and finished in a rugged textured black powdercoat. Its unique flexible design allows it to bend when struck by an object and immediately return to its upright position. Installation is straightforward using the included application-specific threaded adapters that bolt directly to the factory antenna base.

• Fits 1997-2023 Jeep and 2021-2022 Ford Bronco models
• 6-inch height improves clearance on tight trails and in garages
• Resilient cast aluminum construction with flexible memory
• Textured black powdercoat finish for corrosion resistance
• Includes threaded adapters for OE and aftermarket radio bases
• Manufacturer Part Number: 17212.06
• Limited 5-Year Warranty

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models.

The Rugged Ridge CB Radio Antenna Mount provides a durable and straightforward solution for mounting an aftermarket antenna to your Jeep without the need for drilling or permanent modifications. Engineered to integrate seamlessly with the factory spare tire carrier, this mount maintains a clean, professional appearance while ensuring your communication equipment is securely anchored during off-road use.

Constructed from heavy-duty 4mm thick plate steel, this bracket is built to withstand the vibrations and impacts typical of trail driving. The satin black powder coat finish provides superior corrosion resistance and matches the rugged aesthetics of the OE tire carrier. Installation is quick and efficient, utilizing the included hardware for a direct bolt-on fitment to factory mounting points.

• Precision-cut 4mm thick plate steel construction
• Durable satin black powder coat finish for corrosion resistance
• Direct bolt-on installation to factory tire carrier (no drilling required)
• Includes all necessary mounting hardware for a complete install
• Manufacturer Part Number: 11503.97
• Limited 5-year warranty

Note: Antenna is not included.

Fits all 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models, including Rubicon, Sahara, Sport, and X submodels. This Rugged Ridge spare tire carrier antenna mount provides a secure, low-profile solution for mounting your CB or off-road antenna without the need for custom fabrication.

Constructed from heavy-duty steel and finished in a durable textured black powder coat, this bracket is designed to withstand the vibrations of trail use while resisting corrosion. It bolts directly to the factory tire carrier mounting points, utilizing existing hardware locations to ensure a clean, no-drill installation. The design provides a stable ground plane for most aftermarket antennas while keeping the mounting point tucked behind the spare tire for a streamlined look.

• Fits most aftermarket CB and off-road antennas
• Direct bolt-on installation to factory tire carrier mounting points
• Durable textured black powder-coated steel construction
• No drilling or permanent vehicle modifications required
• Includes all necessary mounting hardware
• Manufacturer Part Number: 11503.89
• Limited 5-year warranty

The Rugged Radios VHF 1/2 Wave No Ground Plane (NGP) Antenna is a critical communication solution for vehicles lacking a large metal mounting surface. While standard antennas require a metallic ground plane to reflect signals and maintain resonance, this 1/2 wave design is engineered to operate efficiently on fiberglass, plastic, or composite surfaces, such as UTV roofs or composite body panels.

This antenna provides consistent VHF performance across rugged terrain, ensuring your radio system maintains its range and clarity without the signal degradation typically caused by improper grounding. Built to withstand the vibration and environmental demands of off-road use, it is an essential upgrade for specialized vehicle builds.

• Manufacturer Part Number: VHF-1/2W-SPR
• Antenna Type: VHF 1/2 Wave
• Grounding: No Ground Plane (NGP) required
• Ideal for: Fiberglass roofs, plastic panels, and composite mounting locations
• Design: Durable construction for off-road and utility environments

Maximize your communication distance with the Rugged Radios UHF Long Range Antenna, specifically engineered for the RDH16 Digital Handheld Radio. This high-gain antenna replaces the standard factory unit to provide enhanced signal clarity and extended reach in demanding environments, whether you are on the race course or navigating the trails.

Built with a flexible, durable housing to withstand the rigors of off-road use, it maintains a secure connection to your handheld unit. This antenna is a direct-fit upgrade designed to optimize the output performance of your UHF digital radio system, ensuring you stay connected when it matters most.

• Direct fit for the Rugged Radios RDH16 Digital Handheld Radio
• Optimized for UHF frequency range for maximum distance
• Flexible "ducky" style construction resists snapping and damage
• High-gain design for superior signal penetration
• Manufacturer Part Number: UHF-DUCKY-RDH

Fits Rugged Radios R1, RDH-X, and ABH7 handheld radios.

Maximize your communication range with the Rugged Radios DB-SMA-M Long Range Antenna. Designed as a direct upgrade for standard factory antennas, this high-gain whip antenna significantly improves signal penetration and reception clarity across challenging terrain. Whether you are navigating dense brush or coordinating from a distance, this antenna provides the extra reach necessary for reliable off-road communication.

• Increases transmission and reception distance compared to standard antennas
• Flexible, durable construction built to withstand vibration and off-road use
• Direct-fit SMA-Male connector for secure attachment
• Optimized for handheld VHF/UHF frequency ranges
• Manufacturer Part Number: DB-SMA-M

Fits 2013-2015 Subaru BRZ and Crosstrek, 2014-2015 Forester, and 2013-2015 Scion FR-S.

The PERRIN Shorty Antenna is a direct replacement for the oversized factory whip antenna, providing a sleek, low-profile aesthetic without the "RC car" look. Standing at just 2 inches tall, this mast is designed to maintain clear radio reception while significantly improving the vehicle's silhouette. The installation is a simple screw-on process that utilizes the existing factory base, requiring no tools or permanent modifications.

• Compact 2-inch (51mm) mast length for a clean, modern appearance
• Durable finish designed to withstand UV exposure and automatic car washes
• Simple screw-on installation directly to the factory antenna base
• Engineered to maintain signal strength for local radio frequencies
• Manufacturer Part Number: PSP-BDY-126

Fits select 2008-2014 Subaru WRX and STI, and 2009-2014 Subaru Forester models equipped with the OEM stationary antenna base.

The PERRIN Shorty Antenna is a direct, functional upgrade for the long factory whip antenna that often looks out of place or catches on low-clearance garage doors. This 2-inch mast provides a sleek, low-profile aesthetic without compromising the clean lines of your vehicle. Designed specifically to work with the factory stationary base, it maintains a flush fit that mimics the look of modern high-end vehicle antennas.

Constructed for durability and weather resistance, the PERRIN Shorty Antenna (MPN: PSP-BDY-123) installs in seconds. By simply unscrewing the flexible factory mast and replacing it with the rigid PERRIN 2-inch mast, you can instantly modernize the exterior styling of your Subaru.

• Mast Length: 2.0 inches
• Fitment: Fits vehicles with OEM stationary base
• Installation: Tool-less screw-on replacement
• Profile: Low-profile design to avoid overhead obstructions
• Manufacturer Part Number: PSP-BDY-123

Fits 2008-2014 Subaru WRX/STI and 2009-2014 Subaru Forester models equipped with an OEM pivoting antenna base.

The PERRIN Shorty Antenna is a direct-replacement mast designed to eliminate the "RC car" look of the factory whip antenna. At just 3 inches tall, it provides a significantly cleaner profile while reducing the risk of hitting low garage doors or overhead obstructions. This mast is specifically engineered to thread onto the Subaru factory pivoting base for a seamless, integrated appearance.

• 3-inch mast length for a low-profile, sleek aesthetic
• Precision-machined construction with a weather-resistant finish
• Designed specifically for compatibility with the OEM pivoting base
• Simple, tool-free installation threads directly into the factory housing
• Manufacturer Part Number: PSP-BDY-121

Fits 2008-2014 Subaru WRX and STI, and 2009-2014 Subaru Forester models equipped with the factory pivoting antenna base.

The PERRIN Shorty Antenna (PSP-BDY-120) eliminates the "RC car" look of the long, flexible factory antenna mast. At just 2 inches tall, this low-profile mast provides a sleek, modern aesthetic while reducing the risk of damage from low-hanging branches or automatic car washes. It is designed to thread directly onto your Subaru's OEM pivoting base for a quick, tool-free installation that cleans up the roofline of your vehicle.

• Mast Height: 2 inches (51mm)
• Mounting: Direct replacement for OEM pivoting base
• Finish: Durable black finish for weather resistance
• Manufacturer Part Number: PSP-BDY-120