The Spectre 9799 universal intake tube elbow is a foundational component for fabricating custom cold air intake systems. Engineered for maximum flow, this 90-degree mandrel-bent tube maintains a constant internal diameter throughout the radius to prevent the air restriction and turbulence common in standard crush-bent tubing.

Built from high-grade 6063 aluminum, this component offers a lightweight yet durable solution for under-hood plumbing. The exterior features a high-luster polished finish for a professional appearance. With a 4-inch outside diameter (OD), it integrates seamlessly with modular intake filters, couplers, and clamps to reach the exact dimensions required for your specific engine bay layout.

• Manufacturer Part Number: 9799
• Material: 6063 Polished Aluminum
• Outside Diameter: 4 inches
• Bend Angle: 90 Degrees
• Bend Type: Mandrel Bent
• Application: Universal intake fabrication

The Spectre 9781 4-inch 90-degree intake coupler elbow allows for tight-radius plumbing in custom air intake systems. Designed to connect two components or intake tubes with a 4-inch outside diameter, this coupler is manufactured from durable black PVC for a clean, professional appearance. This elbow provides the flexibility needed to route air induction around tight engine bay constraints.

• Connects two 4-inch outside diameter (OD) components or intake tubes
• Tight 90-degree bend for compact engine bay routing
• Includes two stainless steel worm gear hose clamps for a secure, leak-free installation
• Durable black PVC construction
• Manufacturer Part Number: 9781

Note: This component is designed for air intake applications only. It is not suitable for use on pressurized components, such as turbocharger or supercharger discharge outlets.

The Spectre 9775 Flex Coupler is engineered to provide a secure and flexible connection between air intake tubes. This 4-inch inside diameter coupler allows for custom intake routing, accommodating slight misalignments and absorbing engine vibration that can stress rigid components. Manufactured from a blend of EPDM and TPE materials, it offers durability and heat resistance for standard naturally aspirated configurations.

• Provides a flexible junction for air intake tubes with a 4-inch outside diameter
• Constructed from high-quality black EPDM/TPE for long-term reliability
• Designed to assist in custom intake system fabrication and routing
• Ideal for naturally aspirated applications
• Note: Not recommended for use on turbocharged or supercharged engines
• Manufacturer Part Number: 9775

The Spectre 97711 air intake coupler provides a reliable connection for custom air induction setups. Designed for versatility, this coupler allows you to join 4-inch outside diameter intake tubes, providing the flexibility needed to route your intake away from heat sources or toward fresh air inlets. Manufactured from high-quality EPDM and TPE materials, it offers a secure fit and a clean, black finish for your engine bay.

• Inside Diameter: 4 inches
• Material: EPDM/TPE construction
• Finish: Black
• Application: Connects air intake tubes for custom routing
• Manufacturer Part Number: 97711

Note: This component is designed for naturally aspirated applications and is not recommended for use on turbocharged or supercharged engines.

The Spectre 9771 Intake Coupler is engineered to join 4-inch outside diameter (OD) air intake tubes or components together for custom induction systems. This 2-inch long coupler is manufactured from durable black PVC, providing a clean look and a reliable seal for your intake tract.

This kit comes complete with two stainless steel worm gear hose clamps to ensure a secure installation right out of the box. Please note that this component is designed for the vacuum side of the intake system and is not suitable for use on pressurized components, such as turbocharger or supercharger discharge outlets.

• Fits components with a 4-inch outside diameter
• Length: 2 inches
• Material: High-quality black PVC
• Includes two stainless steel worm gear clamps
• Ideal for custom naturally aspirated air intake builds
• Manufacturer Part Number: 9771

The Spectre 9751 Air Duct Hose Kit is designed to route cool air directly to your intake system, connecting to any 4-inch outside diameter air box inlet, plenum, intake tube, or mounting plate. This versatile ducting solution is ideal for custom intake plumbing where standard rigid tubing cannot fit.

Constructed with a specialized Memory Flex design, this hose is engineered to bend easily into position and retain its shape, ensuring it stays clear of engine components. The threaded design allows for easy installation, and the included couplers enable the connection of multiple kits for longer reach applications.

• Fits components with a 4-inch outside diameter (OD)
• Includes 41 inches of flexible ducting
• Memory Flex design retains position after bending
• Includes 2 threaded PVC couplers for secure attachment
• Compatible with replacement threaded coupler part number 97511
• Manufacturer Part Number: 9751

The Spectre 97490 universal intake tube elbow is a foundational component for fabricating custom cold air intake systems. This 45-degree bend allows for precise air path routing, helping you position filters or intake scoops for maximum efficiency and clearance within the engine bay.

• Manufactured from 6063 grade aluminum for a durable, corrosion-resistant build
• Polished finish provides a professional, show-quality appearance
• 4-inch outside diameter (OD) integrates with standard intake plumbing and couplers
• 7-inch leg length offers ample material for secure mounting or custom trimming to fit
• Ideal for extending intake reach or navigating around engine bay obstructions
• Manufacturer Part Number: 97490

The Spectre 9749 universal intake tube elbow provides the foundation for designing a custom cold air intake system tailored to your engine bay's specific layout. Engineered for optimum airflow and durability, this component allows for precise routing and modular assembly when building a bespoke induction setup.

• Fabricated from grade 6063 polished aluminum for corrosion resistance and a show-quality finish
• 4-inch outside diameter (OD) ensures compatibility with standard high-flow intake components
• Precision 45-degree bend facilitates custom plumbing in tight clearance areas
• Modular design allows the intake to be extended as far as needed when paired with other Spectre tubes and couplers
• Manufacturer Part Number: 9749

The Spectre 9741 Intake Coupler Reducer provides a reliable transition for custom air intake configurations. This adapter is engineered to connect a 4-inch outside diameter (OD) component or intake tube to a 3.5-inch OD component. Its 3-inch length ensures enough surface area for a secure, leak-free seal on non-pressurized intake tracts.

Constructed from durable black PVC, this coupler is built to withstand engine bay temperatures while maintaining its structural integrity. It is an ideal solution for adapting air filters, mass airflow sensors, or custom tubing. Please note that this component is designed for the vacuum side of the intake and is not suitable for pressurized turbocharger or supercharger discharge applications.

• Connects 4-inch OD components to 3.5-inch OD intake tubes
• Overall length: 3 inches
• Material: Heat-resistant black PVC
• Includes two stainless steel worm gear hose clamps
• Manufacturer Part Number: 9741

The Spectre High Performance Racing (HPR) Blue Conical Air Filter is a versatile, high-flow intake solution designed for custom induction systems and performance upgrades. This 9-1/2 inch tall clamp-on filter features an adjustable flange system, utilizing included adapter rings to securely fit 3-inch, 3-1/2 inch, and 4-inch diameter intake tubes. This design allows for a precise fit across a wide range of universal and vehicle-specific applications.

Built for durability and maximum air volume, the 9736 uses an inverted cone design at the top to increase the available surface area, enhancing flow potential while extending service intervals. The filter is constructed from oiled synthetic media reinforced by steel mesh and urethane, providing low restriction and dependable engine protection. Finished with a triple chrome-plated steel top and base, this filter arrives factory pre-oiled and ready for immediate installation.

• Manufacturer Part Number: 9736
• Media Color: Blue
• Filter Height: 9-1/2 inches
• Inlet Diameters: Fits 3", 3-1/2", and 4" tubes (via included adapters)
• Filter Type: Washable performance oiled synthetic media
• Construction: Triple chrome-plated steel top and base with steel mesh reinforcement
• Features: Inverted cone top for increased flow potential and service life
• Warranty: Manufacturer 10-year/1,000,000-mile limited warranty

The Spectre High Performance Racing (HPR) universal conical air filter (9732) provides a high-flow intake solution for custom and performance applications. Featuring a red, factory pre-oiled synthetic media, this clamp-on filter utilizes an inverted cone top to maximize surface area and increase flow potential compared to standard flat-top designs.

Built for durability and long-term use, the filter is constructed with a triple chrome-plated steel top and base. The included adapter rings allow for a precise fit on 3-inch, 3.5-inch, and 4-inch diameter intake tubes. This washable performance filter is precision engineered for low restriction and is backed by a 1,000,000-mile limited warranty.

• Manufacturer Part Number: 9732
• Height: 9.5 inches
• Tube Compatibility: 3 in, 3.5 in, and 4 in (Includes adapter rings)
• Media Type: Red oiled synthetic with steel mesh reinforcement
• Top Style: Inverted cone for enhanced service life and flow
• Construction: Triple chrome-plated steel top and base with urethane seals
• Warranty: 10-Year / 1,000,000 Mile Limited Warranty

Fits intake systems with 3-inch, 3.5-inch, or 4-inch diameter tubing using the included adapter rings.

The Spectre 9731 High Performance Racing (HPR) Air Filter is a washable, clamp-on cone filter engineered to reduce restriction and increase airflow. This filter features an inverted cone top for enhanced flow potential and a longer service life between cleanings. It comes factory pre-oiled and ready for immediate installation on your custom intake setup.

Constructed with high-quality oiled synthetic media reinforced by steel mesh, this filter uses durable urethane and triple chrome-plated steel for the top and base. The adjustable design ensures a secure fit on multiple tube sizes, making it a versatile choice for performance applications.

• Manufacturer Part Number: 9731
• Filter Height: 9-1/2 inches
• Inlet Diameters: 3 in, 3-1/2 in, and 4 in (via included adapter rings)
• Media Material: Washable oiled synthetic
• Color/Finish: Black media with triple chrome plated steel hardware
• Design: Inverted cone top for maximum surface area and flow
• Warranty: 10-year / 1,000,000-mile limited warranty

Constructed from polished aluminum, the Spectre 9718 is a 4-inch outside diameter, 18-inch long intake tube designed for fabricators building custom air induction systems. This universal component features a pre-welded mass air flow (MAF) sensor pad specifically engineered for blade-style sensors found on GM and Ford Coyote engines.

Whether you are welding a full custom setup or connecting sections with silicone couplers, this tube provides the flexibility needed for unique engine bay layouts. The 18-inch length can be shortened to fit your specific application, ensuring a precise fit for your project.

• Outside Diameter: 4 inches
• Length: 18 inches
• Material: Polished Aluminum
• Sensor Compatibility: GM and Ford Coyote blade-style MAF sensors
• Mounting: Welded-on MAFS pad
• Installation: Can be welded or connected via couplers
• Manufacturer Part Number: 9718

Designed for 2004 and later vehicles, the Spectre 9705 Mass Air Flow (MAF) Sensor Adapter Kit allows for the seamless integration of a factory drop-in style sensor into a custom 4-inch intake system. This kit is engineered to maintain proper sensor calibration by managing airflow velocity across the sensor element.

The main adapter features a 4-inch outside diameter and measures 4 inches in length, constructed from polished aluminum for a clean engine bay aesthetic and lasting durability. To prevent air metering errors, the kit includes two ABS flow calibration tubes (76mm and 89mm) that reduce the internal diameter specifically at the sensor mount to ensure the ECU receives accurate signals.

• Manufacturer Part Number: 9705
• Material: Polished aluminum housing with ABS internal components
• Dimensions: 4-inch OD x 4-inch Length
• Calibration Tubes: Includes 76mm and 89mm inserts for precise tuning
• Hardware: Includes necessary mounting hardware for the sensor
• Compatibility: Engineered for select 2004 and newer vehicles with drop-in MAF sensors

The Spectre Air Intake Support Bracket Kit (MPN 9702) provides a versatile solution for stabilizing and securing 4-inch outside diameter intake systems and air filters. Designed to anchor your intake to existing engine or fender bolts, this kit prevents movement and stress on intake components, ensuring a secure fit in custom or universal applications.

Constructed from polished aluminum for durability and a clean engine bay aesthetic, this bracket kit features a fully adjustable design. The studs and tubes can be adjusted to any length or angle, offering infinite configuration options to clear obstacles in the engine compartment. For installation, the bracket can be welded directly to aluminum intake tubes or integrated using standard couplers.

• Fits any 4-inch outside diameter (OD) intake system or air filter
• Manufactured from high-quality polished aluminum
• Universal design attaches to existing engine or fender mounting points
• Adjustable hardware for infinite mounting angles and custom lengths
• Versatile installation: weldable or compatible with couplers
• Manufacturer Part Number: 9702

The Spectre 95990 universal tube elbow is designed for builders fabricating custom cold air intake systems. Engineered for both performance and aesthetics, this 90-degree elbow is mandrel-bent to maintain a constant diameter throughout the turn, preventing the restrictive airflow turbulence common in standard tube bends.

• Outside Diameter: 3-1/2 in. (3.5")
• Bend Angle: 90 Degrees
• Leg Length: 6 in.
• Material: 6063 polished aluminum
• Mandrel-bent construction for maximum flow efficiency
• Ideal for custom air induction and cold air intake plumbing
• Manufacturer Part Number: 95990

The Spectre HPR Round Tapered Conical Air Filter (9132) provides a high-flow, performance alternative to restrictive factory paper filters. Designed for custom air intake systems, this clamp-on filter features a 3-inch inside diameter flange and stands 6.5 inches tall. It utilizes red HPR washable media, engineered to increase airflow and improve engine performance without sacrificing filtration efficiency.

This filter arrives factory pre-oiled and ready for immediate installation onto any 3-inch diameter intake tube, adapter, or throttle body. The HPR synthetic media is fully washable and reusable, allowing for easy maintenance and long-term service life in demanding environments.

• Manufacturer Part Number: 9132
• Inlet Flange Diameter: 3 inches (76mm)
• Overall Height: 6.5 inches (165mm)
• Media Type: Red HPR washable synthetic, pre-oiled
• Design: Round tapered conical clamp-on
• Warranty: 10-year / 1,000,000-mile limited warranty

Please note: This air filter does not include a hose clamp. For a secure installation, the manufacturer recommends using part number 8704.

The Spectre 9131 Conical Air Filter is a high-performance, flat-top replacement filter designed to increase airflow and filtration efficiency. Engineered for intake systems with a 3-inch tube, this filter is constructed from premium washable synthetic media reinforced with a steel mesh for maximum durability and structural integrity.

This filter comes factory pre-oiled and ready to install, providing an immediate upgrade over restrictive paper filters. Its urethane flange ensures a secure seal, while the black media offers a clean, professional look under the hood.

• Flange Inner Diameter: 3 in.
• Base Outer Diameter: 6 in.
• Overall Height: 6.5 in.
• Filter Material: Washable synthetic media with steel mesh reinforcement
• Finish: Black media with urethane components
• Warranty: 10-Year / 1,000,000 Mile Limited Warranty
• Manufacturer Part Number: 9131

Note: Mounting requires a worm gear clamp (sold separately); use Spectre part number 8704 for a secure fit.

Fits 2019-2024 Ram 1500 models equipped with the 5.7L V8 engine.

The Spectre 9090 Performance Air Intake System is engineered to improve engine airflow, delivering increased horsepower and torque while protecting the engine from contaminants. This system replaces the restrictive factory air box with a mandrel-bent polished aluminum intake tube and a high-flow, low-restriction Spectre air filter. To manage intake air temperatures, the kit includes a black powder-coated steel heat shield designed to isolate the filter from engine bay heat.

Every component is selected for durability and ease of installation, featuring a built-in velocity stack for improved airflow efficiency and stainless steel clamps for a secure, leak-free seal. The included air filter is fully washable and reusable, providing a long-term performance solution for your Ram 1500.

• Intake Tubing: Polished aluminum
• Heat Shield: Black powder-coated steel
• Filter Type: Washable and reusable low-restriction media
• Hardware Included: Stainless steel clamps, couplers, bracket, and velocity stack
• Fitment Style: OE-style mounting points for a direct-fit installation
• Manufacturer Part Number: 9090

Upgrade your vehicle's induction system with the Spectre 9089 Air Intake Kit, specifically engineered for select 2018-2025 Jeep Wrangler and Gladiator models equipped with the V6-3.6L engine. This system replaces the restrictive factory airbox to improve airflow, providing a noticeable increase in horsepower and torque while ensuring your engine remains protected from harmful contaminants.

• High-Flow Construction: Features a polished aluminum intake tube and a low-restriction, washable, and reusable Spectre red air filter.
• Effective Heat Management: Includes a black powder-coated steel heat shield designed to isolate the filter from high engine bay temperatures, ensuring cooler air enters the intake inlet.
• Complete Installation Kit: Comes with all necessary hardware for a secure OE-style fit, including a velocity stack, couplers, brackets, and stainless steel clamps.
• Sustainable Performance: The included filter is washable and reusable, eliminating the need for frequent paper filter replacements.

Specifications and Fitment:
Fits 2018-2025 Jeep Wrangler and 2020-2025 Jeep Gladiator (V6-3.6L). This kit is a direct-fit replacement that bolts into existing mounting points for a straightforward installation. Manufacturer Part Number: 9089.

Fits 2012-2015 Acura ILX and Honda Civic (2.4L).

The Spectre 9074 Air Intake Kit is engineered to increase horsepower and torque by optimizing airflow and protecting the intake charge from high engine bay temperatures. This system replaces the restrictive factory air box with mandrel-bent polished aluminum tubing and a high-flow, washable synthetic filter. To ensure a cooler air charge, the kit includes a two-piece black powder-coated steel heat shield that isolates the filter from engine heat.

Designed for a secure fit and finish, this kit includes a velocity stack for improved airflow efficiency, along with high-quality couplers and stainless steel clamps. The filter is positioned on the driver side of the engine bay, providing a performance look and sound while maintaining engine protection.

• Manufacturer Part Number: 9074
• Tubing Material: Polished Aluminum
• Heat Shield: 2-piece black powder-coated steel
• Filter Type: Washable, reusable low-restriction Spectre filter
• Installation: Direct fit with included hardware, velocity stack, and edge trim
• Filter Location: Driver side mount

Fits select 2016-2026 Dodge Durango and Jeep Grand Cherokee models (V6-3.6L), including the Grand Cherokee WK.

This Spectre air intake system is engineered to increase horsepower and torque by improving airflow to your engine while providing superior protection against contaminants. The system replaces the restrictive factory air box with a low-restriction, reusable Spectre air filter and polished aluminum intake tubing. A black powder-coated steel heat shield is included to isolate the intake inlet from engine heat, ensuring a cooler, denser air charge for better combustion. Designed for a straightforward installation, this kit includes all necessary boots, clamps, and hardware to achieve an OE-style fit and finish.

• Increases horsepower and torque by optimizing airflow
• Polished aluminum intake tubing for durability and engine bay aesthetics
• Red Spectre reusable low-restriction air filter
• Black powder-coated steel heat shield helps block engine heat
• Includes all required boots, clamps, and mounting hardware
• Manufacturer Part Number: 9071

Fits 2009-2023 Nissan Maxima models (V6-3.5L).

Improve your engine's airflow and performance with the Spectre 9068 air intake system. This kit replaces the restrictive factory airbox with a mandrel-bent polished aluminum intake tube and a high-flow, washable red filter. Designed to increase horsepower and torque, the system includes a black powder-coated steel heat shield to isolate the filter from engine heat, ensuring a cooler, denser air charge enters the intake inlet.

• Polished aluminum intake tubing for reduced restriction and improved aesthetics
• Washable and reusable low-restriction Spectre air filter
• Black powder-coated steel heat shield helps prevent heat soak
• Integrated MAF sensor mount for direct installation on the intake tube
• Includes velocity stack, couplers, stainless steel clamps, and mounting hardware
• Designed for an OE-style fit and finish using factory mounting points

Specifications:
Manufacturer Part Number: 9068
Tube Material: Aluminum
Tube Finish: Polished
Filter Color: Red
Heat Shield Material: Powder-Coated Steel

Fits 2016-2024 Chevrolet Camaro SS (V8-6.2L).

The Spectre 9061 air intake system is engineered to increase horsepower and torque by reducing intake restriction and protecting the engine from harmful debris. This system replaces the factory air box with a high-flow, washable, and reusable Spectre air filter and polished aluminum intake tubing to improve throttle response and engine sound. To manage intake air temperatures, the kit includes a black powder-coated two-piece heat shield that isolates the filter from radiant engine bay heat.

Designed for a direct bolt-on installation, the intake tube includes specific provisions for the stock MAF sensor and vent (breather) hose, maintaining factory sensor calibration and emissions routing. Each kit is supplied with high-quality couplers, stainless steel clamps, and all necessary hardware for a secure fit.

• Designed to increase horsepower and torque
• Polished aluminum intake tubing for improved airflow and durability
• Two-piece black powder-coated heat shield helps block engine heat
• Includes a high-flow, washable, and reusable Spectre air filter
• Integrated mounting points for factory MAF sensor and breather hose
• Complete with stainless steel clamps and installation hardware
• Manufacturer Part Number: 9061
• Limited Lifetime Warranty

Fits 2016-2023 Toyota Tacoma models including Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport (V6-3.5L).

The Spectre 9060 Air Intake Kit is engineered to increase horsepower and torque by replacing the restrictive factory airbox and intake tract. This system features a high-flow, low-restriction red synthetic filter designed to capture contaminants while improving airflow to the 3.5L engine. The kit includes a mandrel-bent polished aluminum intake tube and a black powder-coated steel heat shield that helps isolate the intake air from engine compartment heat. Designed for a direct-fit installation, this kit utilizes factory mounting points and includes all necessary hardware.

• Manufacturer Part Number: 9060
• Polished aluminum intake tubing for durability and under-hood aesthetics
• Red reusable, low-restriction air filter
• Black powder-coated steel heat shield helps lower intake temperatures
• Includes high-quality boots, clamps, and installation hardware
• Engineered for an OE-style fit and finish

Fits select 1994-1997 Ford F-250, F-250 HD, and F-350 trucks (7.3L).

Improve your engine's airflow and efficiency with the Spectre 9059 Air Intake System. This kit replaces the restrictive factory airbox with a polished aluminum intake tube designed to deliver cooler, denser air to the engine for improved throttle response and performance. The system features a driver-side mounted, washable red air filter that provides high-flow filtration without sacrificing engine protection.

To maintain lower intake temperatures, this kit includes a 2-piece black powder-coated steel heat shield that isolates the filter from radiant engine heat. Every system is engineered for a precise fit, utilizing factory mounting points and including all necessary hardware for a straightforward installation.

• Manufacturer Part Number: 9059
• Material: Polished aluminum tubing and powder-coated steel heat shield
• Filter Type: Low-restriction, washable, and reusable red filter
• Installation: Includes velocity stack, coupler, stainless steel clamps, and edge trim
• Placement: Driver-side filter mounting

Fits 2011-2015 Chevrolet Cruze Eco, LT, and LTZ models equipped with the 1.4L engine.

The Spectre 9044 air intake system is engineered to optimize airflow for increased horsepower and torque while providing superior engine protection. This system replaces the restrictive factory air box with a high-flow, polished aluminum intake tube and a low-restriction, washable synthetic filter. The included black powder-coated steel heat shield isolates the filter from engine bay heat, ensuring cooler, denser air enters the intake tract. Designed for a precise fit, the intake tube features an integrated mounting point for the factory MAF sensor, allowing for a straightforward installation that maintains proper sensor calibration.

• Polished aluminum intake tubing for improved airflow and engine bay aesthetics
• High-flow, washable, and reusable red Spectre air filter
• Black powder-coated steel heat shield blocks radiant engine heat
• Direct-mount MAF sensor location on the intake tube
• Includes velocity stack, couplers, stainless steel clamps, and mounting hardware
• Manufacturer Part Number: 9044

Fits 2011-2019 Ford Explorer (V6-3.5L).

The Spectre 9038 Air Intake System is engineered to increase horsepower and torque in the naturally aspirated 3.5L Ford Explorer. By replacing the restrictive factory air box and intake tract, this system allows your engine to breathe more efficiently, resulting in better throttle response and improved engine sound. The kit includes a mandrel-bent polished aluminum intake tube designed for smooth airflow and a black powder-coated steel heat shield to help isolate the air filter from hot engine bay temperatures.

This performance intake comes equipped with a washable, reusable red Spectre air filter, designed to provide excellent filtration and low restriction. The system includes a velocity stack, high-quality couplers, stainless steel clamps, and all necessary mounting brackets for a straightforward, bolt-on installation using factory mounting points.

• Mandrel-bent polished aluminum tubing for improved airflow and aesthetics
• Washable and reusable red high-flow air filter for long-lasting performance
• Powder-coated steel heat shield blocks radiant engine heat
• Includes velocity stack, couplers, brackets, and stainless steel hardware
• Designed for a precise fit on 2011-2019 Ford Explorer models
• Manufacturer Part Number: 9038

Fits select 2011-2023 Chrysler 300, Dodge Challenger, and Dodge Charger (5.7L).

The Spectre 9036 air intake system is engineered to increase horsepower and torque by optimizing airflow to your engine. This performance intake replaces the restrictive factory air box with a high-flow system designed to protect your 5.7L V8 from harmful contaminants while improving induction sound and efficiency.

This kit features a polished aluminum intake tube for a clean look and a black powder-coated steel heat shield that isolates the filter from hot engine bay air. The included red Spectre air filter is washable and reusable, utilizing a low-restriction design for maximum performance. Each system comes complete with the necessary boots, clamps, and hardware to ensure an OE-style fit and straightforward installation using existing factory mounting points.

• Polished aluminum intake tubing for improved airflow and aesthetics
• High-flow, washable red synthetic air filter
• Black powder-coated steel heat shield helps prevent heat soak
• Complete installation hardware including boots and clamps
• Direct-fit design mounts to factory locations
• Manufacturer Part Number: 9036

Fits select 2011-2023 Chrysler 300, Dodge Challenger, and Dodge Charger (3.6L V6).

Engineered to improve airflow and protect your engine, the Spectre 90280K air intake system replaces the restrictive factory airbox to help your 3.6L V6 breathe better. This system features a black powder-coated aluminum intake tube and a matching steel heat shield designed to isolate the intake inlet from engine bay heat, ensuring a cooler air charge.

Each kit includes a black, low-restriction Spectre air filter that is both washable and reusable for long-term service life. This complete bolt-on solution is designed for an OE-style fit and finish using factory mounting points where possible. The package includes all necessary components for a professional installation, including a velocity stack and stainless steel clamps.

• Construction: Black powder-coated aluminum intake tube and steel heat shield
• Filter Type: Washable, reusable low-restriction synthetic media (Black)
• Hardware Included: Rubber boots, velocity stack, and stainless steel worm-gear clamps
• Installation: Direct-fit hardware included for standard hand-tool installation
• Manufacturer Part Number: 90280K