Precision-engineer custom intake and intercooler plumbing with this set of Ticon aluminum pie cuts. Designed for fabricators who need to navigate tight engine bays where standard mandrel bends won't fit, these segments allow for highly specific routing and clearance. Each 15-degree segment features a 2mm wall thickness, providing a stable, high-quality material for TIG welding.

This 1D radius (4-inch centerline radius) set is optimized for compact packaging. When joined, the six included pieces form a complete 90-degree bend, ideal for custom turbo inlets, charge pipes, and cold air intakes.

• Material: Aluminum
• Outside Diameter: 4" (101.6mm)
• Wall Thickness: 2mm
• Angle: 15 Degrees per segment
• Total Bend: 90 Degrees (6 segments)
• Radius: 1D (1in D)
• Quantity: Pack of 6

Construct complex, tight-radius bends for custom intake or cooling systems with this 6-pack of Ticon aluminum pie cuts. These 15-degree sections are precision-cut to allow for a total 90-degree bend when welded together, providing a professional solution for fabrication in tight engine bays where standard mandrel bends may not fit.

• Material: High-quality aluminum
• Diameter: 3 inches (76.2mm)
• Wall Thickness: 2mm (0.079")
• Bend Angle: 15 degrees per section
• Bend Radius: 1D Tight Radius (TR)
• Quantity: Pack of 6 (Creates a full 90-degree bend)

Designed for professional fabricators, these sections eliminate the need for expensive mandrel bending equipment and provide consistent wall thickness throughout the bend. These are ideal for custom turbo plumbing, intercooler piping, and intake tracts where precision and weld consistency are required.

The Ticon Industries 3-inch Aluminum Donut is a specialized component designed for custom fabrication in tight engine bays. These donuts allow fabricators to create custom tight-radius bends that standard mandrel-bent tubing cannot accommodate. By sectioning the donut to specific degrees, you can achieve precise routing for intake systems, intercooler piping, and other lightweight plumbing applications.

• Material: Aluminum
• Outer Diameter: 3 in
• Wall Thickness: 2mm (.078 in)
• Construction: Engineered for high-quality welding and fitment
• Application: Ideal for tight-radius custom plumbing and fabrication projects

Fabricate precise, tight-radius bends for custom exhaust systems with the MBRP T304 Stainless Steel 180-Degree Universal Pie Cut Kit. This kit is engineered for fabricators who need to navigate complex chassis geometry or tight engine bays where standard mandrel-bent tubing lacks the necessary clearance. The 5-inch diameter segments are specifically suited for heavy-duty diesel exhausts or high-volume forced induction applications where maximizing flow and minimizing backpressure is essential.

Constructed from premium T304 stainless steel, these segments provide exceptional corrosion resistance and durability under extreme thermal cycling. The 12-piece set allows you to build a full 180-degree U-bend or divide the pieces to create multiple custom angles tailored to your specific project needs.

• Material: High-grade T304 stainless steel for superior heat and corrosion resistance
• Diameter: 5.0 inches
• Bend Range: 12 pieces forming a total of 180 degrees
• Quantity: 12 pie cut segments included
• Fitment: Universal application for custom fabrication

Fabricate professional-grade custom exhaust bends with the MBRP Universal Pie Cut Kit. Designed for fabricators who require precise, tight-radius turns in high-heat environments, these pie cuts allow for complex routing where standard mandrel bends might not fit. Each section is constructed from premium T304 stainless steel, providing exceptional durability and superior corrosion resistance for long-term exhaust integrity.

This 12-piece kit provides enough material to create a full 180-degree bend, or the pieces can be used individually to tackle specific angles required for your custom downpipe, cat-back, or intake plumbing project. The 3.5-inch diameter makes this an ideal choice for high-flow performance applications.

• Material: High-grade T304 stainless steel for maximum corrosion resistance
• Diameter: 3.5 inches
• Configuration: 12-piece kit
• Total Bend Angle: 180 degrees when all pieces are used
• Application: Universal fitment for custom exhaust and fabrication projects

Construct complex exhaust sections with professional precision using the MBRP T304 Stainless Steel Pie Cut Kit. This universal 2.5-inch diameter kit provides the essential building blocks for tight-radius bends and custom routing where standard mandrel-bent tubing lacks the necessary clearance.

Each piece is manufactured from high-grade T304 stainless steel, offering superior corrosion resistance and long-term durability for custom exhaust projects. The kit includes 12 individual pie cuts that, when welded together, create a full 180-degree bend, allowing you to customize the angle and radius to fit your specific chassis requirements.

• Material: T304 Stainless Steel
• Tubing Diameter: 2.5 inches
• Total Bend Capability: 180 Degrees
• Piece Count: 12-piece set
• Fitment: Universal application for custom fabrication

Construct your custom exhaust system using MBRP Garage Parts mandrel-bent components. This universal 45-degree elbow is engineered for diesel and high-flow applications where maintaining consistent pipe diameter is critical for performance. Unlike standard pressure-bent tubing that can wrinkle or collapse at the bend, these mandrel-bent pipes ensure maximum flow and reduced backpressure.

Fabricated from 16-gauge aluminized steel, each piece features fully coated seams to provide reliable corrosion resistance and long-term durability. With 12-inch legs on both sides of the bend, you have ample material for trimming and positioning. These universal components are designed for fabrication enthusiasts; simply cut to length and weld on hangers as required for your specific vehicle setup.

• Universal fitment for custom exhaust fabrication
• 5-inch outside diameter (OD)
• 45-degree mandrel bend eliminates restrictive wrinkles
• Dual 12-inch legs provide versatile trimming options
• Heavy-duty 16-gauge aluminized steel construction
• Fully coated seams for enhanced corrosion protection

Engineered for custom exhaust fabrication and diesel performance applications, this MBRP 45-degree bend from the Garage Parts series provides the precision needed for a professional-grade installation. These universal components allow enthusiasts to build or repair exhaust systems to their exact specifications, offering a cost-effective alternative to pre-bent kits without sacrificing flow quality.

Each piece is manufactured from 16-gauge aluminized steel and features smooth mandrel bends to eliminate the wrinkles and diameter restrictions found in crush-bent tubing. The aluminized coating covers the entire surface, including the seams, to provide reliable corrosion resistance for long-term service. With 12-inch legs on either side of the 45-degree angle, you have ample material for trimming and welding hangers to suit your specific chassis layout.

• Bore Diameter: 3 in.
• Bend Angle: 45 Degrees
• Leg Length: 12 in.
• Material: 16-Gauge Aluminized Steel
• Construction: Mandrel Bent
• Part Type: Universal Exhaust Tubing

Vibrant Performance 6061 aluminum transition weld ferrules provide fabricators with a reliable solution for connecting different tubing diameters within an HD Clamp system. This specific ferrule facilitates a clean transition from a 4.5-inch OD to a 4-inch OD, allowing for more versatile intake and charge pipe configurations without compromising seal integrity.

Constructed from high-grade 6061 aluminum, these ferrules are designed to be welded directly to aluminum tubing. Each unit comes equipped with a high-temperature O-ring to ensure a leak-proof seal when mated with Vibrant HD Clamp assemblies, providing a more robust connection than traditional silicone couplers for high-boost applications.

• Manufacturer Part Number: 12674
• Material: 6061 Aluminum
• Transition Size: 4.5" OD to 4" OD
• Compatibility: Vibrant HD Clamp Assemblies
• Included Hardware: (1) Transition Weld Ferrule, (1) O-Ring Seal

Vibrant Performance Aluminum Transitions provide an efficient, professional solution for reducing or expanding tubing sizes in custom fabrication projects. These transitions are an ideal choice for fabricators building permanent hard-piping systems for intakes, intercooler plumbing, or cooling systems where silicone couplers are not desired.

• Material: High-grade 6061 aluminum
• Finish: Mirror polished for a clean, professional appearance
• Dimensions: 2-inch to 2.5-inch Tube O.D. (Outside Diameter)
• Length: 3-inch Overall Length (OAL)
• Weldability: Requires minimal surface preparation for high-quality TIG welding
• Manufacturer Part Number: 12061

Each transition is engineered for dimensional accuracy and material consistency, ensuring a precise fit for your custom fabrication needs.

The Vibrant Performance 12051 Aluminum Joiner Coupling is an essential component for custom automotive plumbing, providing a secure connection for intake, intercooler, or radiator systems. This 2.25-inch O.D. joiner is designed for fabricators building custom silicone coupling combinations or welding inlets and outlets directly to aluminum radiators and intercooler end tanks.

Constructed from high-grade 6061/6063 aluminum, this joiner features bead-rolled ends to ensure maximum hose retention and prevent blow-off under high boost pressure. The mirror-polished finish provides a professional look and requires minimal surface preparation for TIG welding. Fabricators can rely on the dimensional accuracy and material consistency required for high-performance builds.

• Manufacturer Part Number: 12051
• Tube Outer Diameter: 2.25 in (57.2 mm)
• Overall Length: 3.0 in (76.2 mm)
• Material: 6061/6063 Aluminum
• Finish: Mirror Polished
• Bead Roll: Standard bead roll on both ends for superior hose grip
• Weldability: Clean surface for minimal TIG welding preparation

Vibrant Performance 6061 aluminum tubing is engineered for professional-grade fabrication in automotive intake, intercooler, and cooling systems. This 90-degree mandrel-bent tube provides a lightweight, durable solution suitable for both pressurized forced-induction and naturally aspirated applications. Each length is mirror-polished to ensure a show-quality finish in any engine bay.

Built for material consistency and dimensional accuracy, this tubing requires minimal preparation for TIG welding. It is the ideal choice for fabricators building custom plumbing that demands tight tolerances and high-quality finishes. The universal design allows for versatile routing in diverse automotive plumbing projects.

• Material: 6061 Aluminum
• Outer Diameter (O.D.): 2.25 inches (57.15mm)
• Bend Angle: 90 Degrees
• Finish: Mirror Polished
• Application: Universal (Pressurized or Naturally Aspirated)
• Manufacturer Part Number: 2887

Vibrant Performance mirror-polished aluminum tubing is engineered for fabricators building custom intake systems, intercooler piping, and cooling assemblies. This 60-degree bend provides consistent wall thickness and dimensional accuracy required for professional-grade fabrication.

• Outer Diameter: 3.00" (76.2mm)
• Bend Angle: 60 Degrees
• Material: 6061 Aluminum
• Finish: Mirror Polished
• Applications: Pressurized (forced induction) and naturally aspirated systems
• Manufacturer Part Number: 2819

This lightweight tubing is designed to require minimal preparation for welding. Whether you are routing air for a turbocharger or a custom cold-air intake, this 6061 aluminum ensures high-strength performance and a show-quality finish.

Vibrant Performance 6063 aluminum tubing is engineered for professional fabricators requiring lightweight and corrosion-resistant plumbing for custom intake systems, intercooler piping, or turbo setups. This 120-degree tight radius bend is suitable for both pressurized and naturally aspirated applications where space is at a premium and precise routing is required for component clearance.

• Material: 6063 Aluminum
• Outer Diameter: 3 in (76.2mm)
• Bend Angle: 120 Degrees
• Radius Type: Tight Radius
• Application: Pressurized or Naturally Aspirated systems
• Manufacturer Part Number: 12186

Fabricate custom intake and intercooler plumbing with this Vibrant Performance 3.5-inch OD aluminum bend. Constructed from lightweight 6063 aluminum, this 120-degree tight radius elbow is engineered for space-constrained engine bays where standard radius bends would be too bulky. This tubing is suitable for both high-pressure forced induction systems and naturally aspirated applications.

• Material: 6063 Aluminum
• Outer Diameter (OD): 3.5 inches (88.9mm)
• Bend Angle: 120 Degrees
• Bend Radius: Tight Radius
• Compatibility: Pressurized and naturally aspirated systems
• Manufacturer Part Number: 12191

Vibrant Performance aluminum tubing is a preferred choice for professional fabricators building custom charge pipes, cold air intakes, and turbo setups that require precise geometry and consistent wall thickness for high-quality TIG welding.

The Vibrant Performance 12067 Aluminum Transition offers a professional and cost-effective solution for reducing or expanding tubing sizes in custom automotive plumbing. Manufactured from 6061 aluminum, this transition is engineered for fabricators who require dimensional accuracy and material consistency without relying on silicone couplers.

Designed specifically for TIG welding, this component requires minimal surface preparation to achieve clean, structural beads. The mirror-polished finish ensures it is suitable for high-visibility applications such as intercooler piping, intake systems, and custom cooling setups.

• Manufacturer Part Number: 12067
• Material: 6061 Aluminum
• Finish: Mirror Polished
• Dimensions: 3.00in O.D. to 3.50in O.D.
• Overall Length: 3.00in
• Ideal for custom fabrication where silicone couplers are not desired
• Ensures smooth internal transitions for optimized airflow

The Vibrant Performance Aluminum Joiner (MPN 12054) is a precision-engineered fabrication component designed for building custom intake, intercooler, and cooling system plumbing. With a 3-inch outer diameter and a compact 3-inch overall length, this joiner provides a reliable transition or connection point for silicone couplers and hoses.

Fabricated from 6061 aluminum, this joiner is bead-rolled on both ends to ensure superior hose retention, preventing blow-off under high-boost or high-pressure conditions. The mirror-polished finish provides a show-quality look, while the high-grade material requires minimal surface preparation for clean, consistent TIG welding. It is an essential component for fabricators creating custom intercooler end tanks or welding hose inlets and outlets to aluminum radiators.

• Outer Diameter: 3.000" (76.2mm)
• Overall Length: 3.000" (76.2mm)
• Material: 6061 Aluminum
• Finish: Mirror Polished
• Features: Bead-rolled ends for secure hose seating
• Fabrication: Minimal preparation required for TIG welding
• Manufacturer Part Number: 12054

Fits select 2017-2025 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD models (6.6L).

The Wehrli Custom Fabrication Intake Resonator Delete Plug is a simple and effective way to clean up the engine bay of your L5P Duramax. By removing the bulky plastic factory resonator connected to the OEM intake, this plug provides a more streamlined appearance and allows for a more aggressive turbo sound. This component is designed as a direct bolt-on solution that requires no tuning or additional modifications.

Each plug is CNC-machined in the USA from high-grade 6061 billet aluminum, ensuring precise tolerances and a perfect fit into the factory intake housing. The black anodized finish provides long-lasting corrosion resistance and features a laser-engraved Wehrli Custom Fabrication logo for a professional finish.

• Material: 6061 Billet Aluminum
• Finish: Black Anodized with laser-engraved logo
• Installation: Bolt-on, replaces factory plastic resonator
• Compatibility: Works with stock intake systems; no tuning required
• Compliance: Emissions friendly
• Manufacturer Part Number: WCF100473

Designed for professional-grade custom fabrication, this Vibrant Performance straight tubing is constructed from T6061 aluminum to ensure high weldability and material consistency. With a 5-inch outer diameter (127mm) and an 18-inch length, this tubing is an ideal solution for constructing custom intake systems, intercooler piping, and turbocharger plumbing in both naturally aspirated and pressurized applications.

• Material: T6061 aluminum alloy for superior structural integrity
• Finish: Mirror polished for a clean, show-quality appearance
• Dimensions: 5.00-inch (127mm) Outer Diameter x 18-inch length
• Fabrication: Requires minimal preparation for welding; maintains dimensional accuracy across the entire length
• MPN: 2977

Vibrant Performance 6061 aluminum straight tubing (MPN 2947) provides fabricators with a lightweight and dimensionally accurate solution for custom intake and intercooler piping. This 4.5-inch OD tube is 18 inches long and features a high-quality mirror-polished finish, making it suitable for both pressurized forced-induction and naturally aspirated applications where appearance and airflow are critical.

Engineered for material consistency and precision, this T6061 aluminum tube requires minimal preparation for welding and fabrication. It is the trusted choice for professional fabricators building high-performance cooling, induction, and air-handling systems.

• Material: T6061 Aluminum
• Outside Diameter: 4.5 in (114.3mm)
• Length: 18 in (457.2mm)
• Finish: Mirror Polished
• Manufacturer Part Number: 2947
• Application: Pressurized or naturally aspirated induction systems

This Vibrant Performance 90-degree mandrel bend is engineered for high-performance fabrication, offering a lightweight solution for custom intake systems, intercooler piping, and turbocharger plumbing. Constructed from T6061 aluminum, this tubing provides excellent weldability and structural integrity under both pressurized and naturally aspirated conditions.

The mandrel bending process ensures a constant cross-sectional area throughout the curve, minimizing turbulence and optimizing airflow. Each piece arrives mirror-polished, significantly reducing preparation time for show-quality finishes. Professional fabricators rely on Vibrant tubing for its material consistency and precise dimensional accuracy.

• Manufacturer Part Number: 2946
• Material: T6061 Aluminum
• Outer Diameter: 4.5 inches (114.3mm)
• Bend Angle: 90 Degrees
• Finish: Mirror Polished
• Construction: Mandrel Bent

This Vibrant Performance 45-degree mandrel bend is engineered for custom fabrication projects requiring lightweight, durable plumbing. Constructed from high-strength T6061 aluminum, this tubing provides the consistency and dimensional accuracy needed for professional-grade welding and fabrication. The mandrel bending process maintains a constant internal diameter throughout the bend, ensuring unrestricted airflow in both naturally aspirated and pressurized applications, such as custom intake or intercooler piping.

The mirror-polished finish offers a high-end look for engine bay aesthetics while requiring minimal surface preparation before installation or welding.

• Outer Diameter: 4.5" (114.3mm)
• Bend Angle: 45 Degrees
• Material: T6061 Aluminum
• Finish: Mirror Polished
• Construction: Mandrel-bent for smooth internal flow
• Manufacturer Part Number: 2945

Vibrant Performance universal aluminum tubing is designed for high-performance fabrication, offering the dimensional accuracy required for both pressurized and naturally aspirated applications. This 18-inch straight section is constructed from lightweight 6063 aluminum, providing a clean surface that requires minimal preparation for welding. The mirror-polished finish ensures a professional, show-ready aesthetic for custom intake tracts, intercooler piping, and turbocharger plumbing.

• Outer Diameter: 3.5" (88.9mm)
• Length: 18" (457.2mm)
• Material: 6063 Aluminum
• Finish: Mirror Polished
• Configuration: Straight Section
• Manufacturer Part Number: 2892

Vibrant Performance universal 90-degree aluminum tubing is engineered for professional-grade fabrication of custom intake systems, intercooler piping, and turbo induction setups. This 3.5-inch O.D. bend provides exceptional dimensional accuracy and material consistency, making it a reliable choice for both naturally aspirated and pressurized forced induction applications.

Constructed from lightweight 6063 aluminum, this tubing features a mirror-polished finish for high-end aesthetics. It requires minimal surface preparation before welding, streamlining the fabrication process for custom automotive projects where fitment and weld quality are critical.

• Manufacturer Part Number: 2891
• Outside Diameter: 3.5 in (88.9mm)
• Bend Angle: 90 Degrees
• Material: 6063 Aluminum
• Finish: Mirror Polished
• Usage: Suitable for pressurized and naturally aspirated applications

Vibrant Performance 2890 offers a high-quality solution for custom fabrication projects, including intake systems, intercooler piping, and cooling assemblies. This 3.5-inch O.D. universal aluminum tubing features a precise 45-degree mandrel bend to maintain consistent inner diameters and optimize airflow in both naturally aspirated and pressurized applications.

Constructed from lightweight aluminum, this tubing is engineered for material consistency and dimensional accuracy. The mirror-polished finish provides a show-quality appearance while the surface requires minimal preparation for TIG welding and custom fabrication.

• Manufacturer Part Number: 2890
• Outside Diameter: 3.5 in (88.9mm)
• Bend Angle: 45 Degrees
• Material: 6061 Aluminum
• Finish: Mirror Polished
• Application: Suitable for pressurized and naturally aspirated systems
• Mandrel-bent for smooth internal flow characteristics

Vibrant Performance 6061 Aluminum Tubing provides a reliable, lightweight solution for custom automotive fabrication. This 2.25-inch O.D. straight pipe is engineered for consistency and dimensional accuracy, making it ideal for constructing intercooler piping, air intake tracts, and custom cooling lines in both naturally aspirated and forced induction systems.

Manufactured from high-grade 6061 aluminum, this tubing is designed for easy welding and requires minimal surface preparation. The mirror-polished finish offers a professional, show-quality appearance under the hood, while the 0.062" (1.6mm) wall thickness maintains structural integrity under pressure without adding unnecessary weight to the vehicle.

• Material: 6061 Aluminum
• Outer Diameter (O.D.): 2.25" (57.2mm)
• Length: 18" (457.2mm)
• Finish: Mirror Polished
• Wall Thickness: 0.062" (1.6mm)
• MPN: 2888

Vibrant Performance 45-degree aluminum elbows are engineered for professional fabricators requiring material consistency and dimensional accuracy. Constructed from 6061 aluminum, this 2.25-inch O.D. tubing is suitable for both pressurized and naturally aspirated applications, including custom intercooler piping, intake systems, and cooling paths.

Each piece features a mirror-polished finish and requires minimal preparation for welding or fabrication. These lightweight components are a trusted choice across various motorsport segments where reliable tolerances and a high-end finish are mandatory.

• Manufacturer Part Number: 2886
• Material: 6061 Aluminum
• Outer Diameter (O.D.): 2.25 in
• Bend Angle: 45 Degrees
• Finish: Mirror Polished
• Application: Universal (Pressurized or Naturally Aspirated)