Fits select 2011-2014 Dodge Durango and 2011-2015 Jeep Grand Cherokee models (V6-3.6L).

The Spectre 9020 Air Intake Kit is engineered to increase horsepower and torque by streamlining airflow to your engine while providing superior protection against contaminants. This performance intake system replaces the restrictive factory air box and tubing with a high-flow setup designed for bolt-on installation and an OE-style fit. It features a polished aluminum intake tube for reduced restriction and a black powder-coated steel heat shield to help isolate the intake inlet from high engine bay temperatures.

• High-flow, reusable red Spectre air filter with low-restriction media
• Polished aluminum intake tubing improves airflow and engine bay aesthetics
• Black powder-coated steel heat shield blocks radiant engine heat
• Includes all necessary boots, stainless steel clamps, and mounting hardware
• Designed to work with factory electronics and will not void factory warranty
• Manufacturer Part Number: 9020

Fits 1968-1972 Chevrolet Chevelle and El Camino models equipped with an LS engine swap.

This Spectre air intake system is engineered specifically for the engine bay and fender layout of 1968-1972 GM A-body muscle cars running modern LS powerplants. Designed to optimize airflow while maintaining a clean look, this kit positions the air filter on the driver side of the engine compartment to clear accessories and intake manifold routing commonly found in swap applications. The mandrel-bent polished aluminum tubing provides a low-restriction path for incoming air to improve engine efficiency and response.

The system is compatible with blade-style mass air flow (MAF) sensors or speed density setups and can be adapted to round boot-in MAF sensors with additional components. It includes a high-performance, red washable synthetic filter and a custom-fit heat shield that utilizes existing vehicle mounting points for a secure, drill-free installation.

• Finish: Polished aluminum tubing for a show-quality appearance
• Filter Type: Red, washable and reusable high-flow media
• Filter Position: Driver side engine compartment
• MAF Compatibility: Designed for Blade-style MAF sensors (includes adapter)
• Installation: Bolts to factory mounting points with included hardware and couplers
• Manufacturer Part Number: 901234

Fits select 2014-2020 Cadillac Escalade, Chevrolet Silverado 1500, Suburban, and Tahoe, and GMC Sierra 1500 and Yukon models (V8-5.3L).

The Spectre 9006 air intake system is engineered to increase horsepower and torque by providing a higher volume of cooler, denser air to your engine. This kit replaces the factory airbox and intake tubing with a low-restriction, polished aluminum intake tube and a high-performance washable air filter, helping to protect your engine from harmful debris while improving efficiency.

• High-Flow Filtration: Includes a red, pre-oiled synthetic filter that is washable and reusable for long-term service life.
• Heat Management: Features a black powder-coated steel heat shield designed to isolate the filter from high engine bay temperatures.
• Precision Engineering: The polished aluminum intake tube includes provisions to mount the factory MAF sensor and vent (breather) tubes.
• Complete Installation Kit: Comes with a velocity stack adapter, stainless steel hose clamps, couplers, and all necessary hardware for an OE-style fit and finish.
• Manufacturer Part Number: 9006

Fits 2011-2013 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD (V8-6.0L).

The Spectre 9004 air intake system is engineered to increase horsepower and torque by reducing airflow restriction compared to the factory intake. This system replaces the restrictive stock air box with a high-flow setup that provides a cooler, denser air charge to the engine for improved performance and throttle response.

• High-quality polished aluminum intake tubing for smooth airflow and high-end aesthetics
• Includes a red Spectre reusable, low-restriction air filter for superior filtration
• Black powder-coated heat shield helps isolate the air intake from engine heat
• Direct-fit design mounts using factory mounting points where applicable
• Comes complete with all necessary boots, clamps, and hardware for a straightforward installation
• Manufacturer Part Number: 9004

Fits 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser (V6-4.0L).

The Spectre 9002 air intake system is engineered to increase horsepower and torque by optimizing airflow while protecting your engine from harmful contaminants. This system replaces the restrictive factory air box with a high-flow setup designed for a precise OE-style fit and finish. By reducing air intake restriction, your engine can breathe more efficiently for improved throttle response.

Constructed with high-quality polished aluminum tubing, this kit features a black powder-coated heat shield to help isolate the intake inlet from radiant engine heat. It includes a red, reusable low-restriction air filter and all necessary boots, clamps, and hardware for a complete, bolt-on installation.

• High-quality polished aluminum intake tubing
• Black powder-coated heat shield helps block engine heat
• Includes a washable and reusable red low-restriction air filter
• Designed to increase horsepower and torque
• Direct fitment using factory mounting points
• Complete with all necessary boots, clamps, and hardware
• Manufacturer Part Number: 9002

The Spectre 8791 90-degree elbow coupler is engineered for custom air intake configurations where engine bay space is restricted. This component allows for an immediate 90-degree bend, connecting a 3-inch outside diameter component to either another 3-inch tube or a 2.5-inch tube using the included removable reducer.

• Fits 3-inch outside diameter intake tubes and components
• Includes 2.5-inch removable reducer for versatile fitment
• 90-degree bend accommodates tight clearances in the engine compartment
• Constructed from durable black PVC material
• Includes two stainless steel worm gear hose clamps for a secure seal
• Manufacturer Part Number: 8791

Note: This coupler is designed for use on the vacuum side of air intake systems. It is not rated for pressurized applications such as turbocharger or supercharger discharge outlets.

The Spectre 8741 Air Duct Hose Kit is engineered to channel cooler ambient air directly to your engine by connecting to 3-inch outside diameter airbox inlets, plenums, intake tubes, or mounting plates. Featuring a memory-flex design, this flexible ducting allows for complex routing while maintaining its shape and position once installed.

This versatile kit is ideal for custom intake setups where space is limited or non-linear routing is required. The ducting can be threaded together with additional sections for longer applications using the included PVC couplers. For a secure, vibration-resistant installation, the use of hose clamps is recommended at all connection points.

• Manufacturer Part Number: 8741
• Diameter: 3 inches (Outside Diameter)
• Length: 28 inches
• Material: Flexible memory-flex hose with threaded PVC couplers
• Color: Black
• Expandability: Multiple pieces can be threaded together; compatible with replacement coupler 87411

Kit Includes: 28 inches of flexible ducting and two (2) threaded PVC couplers.

The Spectre 8711 Vacuum/Sensor Adapter Kit provides a professional solution for plumbing vacuum lines and push-in sensors directly into an intake tube. Designed for use with Spectre modular intake systems or custom forced induction and naturally aspirated setups, this kit allows you to add necessary vacuum ports or sensor bungs exactly where they are needed for optimal performance and sensor accuracy.

• Comprehensive Fitting Set: Includes 12 fittings in common sizes: (3) 5mm, (3) 10mm, (3) 13mm, (2) 16mm, and (1) 19mm.
• Complete Hardware: Supplied with 6 rubber grommets to ensure a tight, leak-free seal against the intake tract.
• Installation Ready: Includes 2 hole saws specifically sized for the included fittings and grommets.
• Compatibility: Engineered to fit all popular vacuum line and air sensors used in modular air intake systems.
• Part Number: 8711

Designed for 14-inch diameter air cleaner assemblies, the Spectre ExtraFlow HPR (High Performance Racing) Air Filter Custom Assembly Value Pack (MPN 847626) is engineered to optimize engine intake efficiency by maximizing filter surface area. By replacing a standard solid lid with the functional ExtraFlow filter top, this assembly allows significantly more air into the engine for improved throttle response and performance.

• Fits 14-inch diameter air cleaner assemblies
• Includes a 14-inch by 3-inch high-performance air filter element
• ExtraFlow filter lid increases total airflow by providing a filtered intake surface on top
• Premium blue HPR synthetic media for high flow and superior filtration
• Show-quality design for custom and performance applications
• Manufacturer Part Number: 847626

The Spectre High Performance Racing (HPR) adjustable clamp-on air filter (part #8166) is engineered for versatile fitment and low-restriction airflow. This 2-1/2 inch tall blue media filter features a conical design with an inverted cone top to maximize surface area and increase flow potential compared to standard flat-top filters.

Constructed from oiled synthetic media reinforced with durable steel mesh and urethane, this washable performance filter is built for long-term durability and high-flow efficiency. The triple chrome-plated steel top and base provide a professional finish and structural integrity. This filter comes factory pre-oiled and includes specific adapter rings to ensure a secure, airtight fit on multiple intake tube diameters.

• Part Number: 8166
• Filter Height: 2-1/2 in.
• Inlet Fitment: Adjustable for 3 in., 3-1/2 in., and 4 in. diameter tubes
• Filter Media: Washable, pre-oiled synthetic with steel mesh reinforcement
• Top Design: Inverted cone for enhanced service life and flow
• Construction: Triple chrome-plated steel top and base
• Warranty: 10-year / 1,000,000-mile limited warranty

The Spectre High Performance Racing (HPR) 8161 Air Filter is a versatile, clamp-on cone filter engineered for low restriction and increased flow potential in custom intake systems. This 2-1/2 inch tall filter features black oiled synthetic media reinforced with steel mesh and a triple chrome-plated steel top and base. To maximize performance, the design incorporates an inverted cone top, providing a larger surface area for filtration and extending service life. Each filter comes with adapter rings, allowing it to fit 3-inch, 3-1/2 inch, and 4-inch diameter intake tubes.

• Adjustable fitment includes rings for 3in, 3.5in, and 4in intake tubes
• Black oiled synthetic media provides high-flow filtration
• Inverted cone top increases surface area for enhanced air volume
• Triple chrome-plated steel top and base with urethane construction
• Washable and reusable performance filter; factory pre-oiled and ready to install
• 10-year/1,000,000-mile limited warranty
• Part Number: 8161

The Spectre High Performance Racing (HPR) Air Filter is a versatile, high-flow solution designed for custom intake systems and performance applications. This 5-1/2-inch-tall clamp-on filter utilizes a white oiled synthetic media reinforced with steel mesh to provide low restriction and high filtration efficiency. The design features an inverted cone top, which adds significant surface area to enhance flow potential and extend service intervals between cleanings.

Engineered for maximum compatibility, this adjustable filter includes precision adapter rings that allow it to fit 3-inch, 3-1/2-inch, and 4-inch diameter intake tubes. Constructed from high-quality urethane and steel mesh, the filter arrives factory pre-oiled and ready for immediate installation.

• Manufacturer Part Number: 8138
• Filter Height: 5.5 inches
• Adjustable Flange Sizes: 3 in, 3.5 in, and 4 in
• Media Type: White oiled synthetic with steel mesh reinforcement
• Design: Conical with internal inverted cone for increased surface area
• Warranty: 10-year / 1,000,000-mile limited warranty

The Spectre High Performance Racing (HPR) universal clamp-on cone filter is engineered to provide increased airflow and filtration for custom air intake systems. This 5-1/2 inch tall filter features a versatile adjustable design, utilizing included adapter rings to securely fit 3-inch, 3-1/2 inch, and 4-inch diameter intake tubes.

Constructed with durability in mind, the filter utilizes blue oiled synthetic media reinforced by steel mesh and housed in a urethane body. The triple chrome-plated steel top and base provide a show-quality finish, while the inverted cone design integrated into the top increases surface area for enhanced flow potential and a longer service life. This performance filter comes factory pre-oiled and is fully washable and reusable.

• Manufacturer Part Number: 8136
• Inlet Diameter: Adjustable (3in, 3.5in, 4in)
• Filter Height: 5-1/2 inches
• Media Material: Oiled blue synthetic
• Construction: Steel mesh with triple chrome-plated top/base
• Design: Inverted cone top for maximum surface area
• Warranty: 10-year / 1,000,000-mile limited warranty

The Spectre High Performance Racing (HPR) adjustable conical air filter is engineered to provide increased airflow and high-capacity filtration for custom intake applications. This 5-1/2 inch tall filter features a red oiled synthetic media reinforced with steel mesh and a durable urethane flange. The unique design includes an inverted cone top to maximize surface area, facilitating improved flow potential and a longer service life between cleanings.

Versatility is built-in with the included adapter rings, allowing this single clamp-on filter (MPN 8132) to securely mount onto 3-inch, 3-1/2 inch, or 4-inch diameter intake tubes. Factory pre-oiled and ready for immediate installation, it provides a low-restriction path for incoming air while maintaining excellent engine protection.

• Adjustable flange fits 3-inch, 3.5-inch, and 4-inch intake tubes via included adapters
• Red oiled synthetic filter media for high-flow performance
• 5-1/2 inch height with inverted cone top for maximum surface area
• Constructed with steel mesh and high-quality urethane components
• Factory pre-oiled and ready to install
• Backed by a 10-year / 1,000,000-mile limited warranty
• Manufacturer Part Number: 8132

The Spectre 8131DK Universal Pre-Filter Wrap is engineered to protect your performance air filter and extend service intervals in high-dust environments. This wrap is constructed from a durable polyester material featuring a uniform weave that captures fine debris and silt before it reaches the filter pleats, preventing premature clogging without causing significant airflow restriction.

• Material: High-durability polyester mesh
• Dimensions: 6.0 in. height x 6.125 in. diameter
• Color: Black finish
• Function: Secondary filtration layer for off-road or dusty conditions
• Maintenance: Fully cleanable and reusable using Spectre Filter Cleaner
• Manufacturer Part Number: 8131DK

This universal pre-filter is an ideal solution for vehicles operating in harsh environments, ensuring your primary air filter stays cleaner for longer while maintaining engine induction efficiency.

The Spectre High Performance Racing (HPR) Air Filter (8131) is a versatile, clamp-on conical filter designed for custom air intakes and high-performance engine applications. This black media filter utilizes a unique adjustable flange system, allowing it to securely fit 3-inch, 3.5-inch, and 4-inch diameter intake tubes using the included adapter rings.

Constructed for longevity and low restriction, the filter features oiled synthetic media reinforced with steel mesh and set in a durable urethane base. The top of the filter houses an inverted cone design, which significantly increases the total surface area to enhance airflow potential and extend service intervals. Finished with a triple chrome-plated steel top and base, this unit is factory pre-oiled and ready for immediate installation.

• Fits 3-inch, 3.5-inch, and 4-inch diameter intake tubes via included adapters
• Black oiled synthetic media provides high flow and superior filtration
• Inverted cone top increases filter surface area for improved airflow
• Triple chrome-plated steel top and base for a professional finish
• Washable and reusable performance media
• Overall Height: 5.5 inches
• Manufacturer Part Number: 8131
• 10-year/1,000,000-mile limited warranty

The Spectre 6283 Small Shifter Boot provides a professional, finished look for universal floor-mounted shifter installations. This boot effectively seals cabin floor openings to protect against road debris and heat while maintaining a classic performance aesthetic.

• Designed to cover rectangular floor openings up to 4 inches by 5 inches
• Manufactured from durable, flexible black rubber for long-lasting service
• Includes a triple chrome-plated steel installation ring for a high-luster finish and corrosion resistance
• Complete with mounting screws and easy-to-follow instructions for a secure fit
• Manufacturer Part Number: 6283

The Spectre 5965 universal inline fuel filter provides reliable filtration for carbureted fuel systems while adding a high-luster finish to your engine bay. This canister-style filter is designed for versatility, featuring stepped fittings that accommodate both 5/16-inch and 3/8-inch fuel lines.

Built with a durable chrome-plated housing, this filter is engineered for corrosion resistance and long-term performance in low-pressure environments. This component is designed exclusively for carbureted applications; it is not compatible with high-pressure fuel-injected (EFI) systems.

• Manufacturer Part Number: 5965
• Compatibility: Universal inline fitment for 5/16-inch and 3/8-inch fuel lines
• Material: Chrome-plated metal canister housing
• Application: Carbureted engines only
• Requirements: Not for use with fuel injection (EFI) systems

Fits select 1988-1995 Chevrolet and GMC vehicles equipped with Small Block Chevy 305 and 350 (5.0L / 5.7L) engines. This comprehensive Spectre 5428 engine dress-up kit is engineered to provide a clean, show-quality finish for engines utilizing centerbolt-style cylinder heads.

The kit features stock-height valve covers and a suite of matching accessories, all finished in high-luster triple-plated chrome. To simplify the transition from factory dual-stud air cleaner setups, an included Z-bolt air cleaner adapter stud allows for the installation of a standard center-stud style air cleaner assembly. This kit provides a complete aesthetic overhaul with all necessary hardware and grommets for a straightforward installation.

• Triple chrome-plated finish for maximum corrosion resistance and high-luster shine
• Stock height valve covers designed specifically for centerbolt cylinder heads
• Z-bolt air cleaner adapter stud enables center-stud air cleaner conversion
• Includes matching chrome valve cover T-bolts for secure, tool-free fastening
• Complete kit includes oil filler cap, PCV breather, and required grommets
• Manufacturer Part Number: 5428

Designed for compact carburetor applications, the Spectre 4790 Air Cleaner assembly provides a classic look and effective filtration. This unit features a 4-inch diameter by 2-inch tall flame-retardant paper filter media, engineered to balance airflow and engine protection. The assembly is topped with a triple chrome-plated steel lid for a show-quality finish and a corrosion-resistant zinc-plated flat steel base.

• Fits carburetors with 2-5/8 inch or 2-5/16 inch neck sizes
• 4-inch diameter by 2-inch height assembly
• Flame-retardant paper filter media for increased safety
• Triple chrome-plated steel lid and zinc-plated steel base
• Includes mounting hardware for installation
• Manufacturer Part Number: 4790

Fits select 1980-1996 Buick, Cadillac, Chevrolet, GMC, and Chrysler models equipped with Small Block Chevrolet 265-400 or Chrysler 273-440 engines.

The Spectre Performance 4652 Intake Manifold Bolt and Washer Set provides high-strength hardware for securing your intake manifold. Constructed from Grade 5 steel, these bolts are designed to handle the thermal cycles and torque requirements of small block engine platforms. Each bolt features a 3/8-inch-16 thread pitch and a 1-inch length, paired with a zinc-plated finish for superior corrosion resistance and long-term durability. The hex head design allows for a standard wrench or socket interface during installation.

• Manufacturer Part Number: 4652
• Quantity: 12 bolts and 12 washers
• Thread Size: 3/8 inch-16
• Length: 1 inch
• Material: Grade 5 Steel
• Finish: Zinc Plated
• Drive Type: Hex Head

The Spectre 4641 Header Reducer Kit provides a professional-grade universal solution for transitioning from a 3-inch header collector to a 2-1/2 inch exhaust system. This kit is engineered to facilitate a secure, leak-free connection between the header flange and the rest of your exhaust piping, ensuring optimal exhaust flow and durability.

Each reducer is constructed with a 3-bolt welded-on flange and finished with a durable nickel plating to resist corrosion and maintain a clean appearance. To handle the extreme thermal cycles of performance engines, the kit includes 1/8-inch thick Compressed Ceramic Fiber (CCF) gaskets. Unlike standard non-asbestos gaskets, CCF is designed to withstand excessive heat and pressure without cracking or deteriorating over time.

• Transition: 3-inch header flange to 2-1/2 inch exhaust pipe
• Construction: Nickel-plated steel for corrosion resistance
• Flange Type: Universal 3-bolt welded-on flange
• Gaskets: 1/8-inch thick Compressed Ceramic Fiber (CCF)
• Hardware: Includes nickel-plated steel nuts and bolts
• Quantity: Set of two reducers and gaskets
• Manufacturer Part Number: 4641

The Spectre 4300 push-in valve cover breather is engineered to provide superior crankcase ventilation while maintaining a clean, classic engine bay aesthetic. Constructed from triple chrome-plated steel for durability and a high-luster finish, this breather features an integrated internal baffle designed to effectively prevent oil splash during high-RPM operation.

This universal breather is designed for valve covers with 3/4-inch to 1-1/4-inch breather holes. For applications utilizing a 1-1/4-inch hole, use of Spectre grommet kits 5339 or 5333 is recommended to ensure a proper, leak-free seal.

• Manufacturer Part Number: 4300
• Mounting Style: Push-in
• Neck Diameter: 3/4 inch
• Material: Triple chrome-plated steel
• Internal baffle prevents oil splash and maintains ventilation
• Fits 3/4 inch to 1-1/4 inch valve cover holes (grommets required for larger sizes)

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The Spectre Performance 42563 Universal Hood Pin Kit provides an extra layer of hood security and a classic competition look for your vehicle. This kit is designed to be used in conjunction with the factory OE hood latch, making it an ideal upgrade for custom builds or racing applications where additional retention is necessary.

Constructed with durability in mind, the posts and hair pin clips feature a triple chrome-plated finish for superior corrosion resistance and a high-luster shine. The included hardware is manufactured from stainless steel to ensure longevity against the elements. This universal kit comes complete with all necessary mounting hardware for a straightforward installation.

• Finish: Triple chrome-plated posts and hair pin clips for a mirror-like appearance.
• Construction: High-quality stainless steel hardware components.
• Application: Universal fitment; designed to work alongside the factory hood latch.
• MPN: 42563

Kit Includes: (2) posts, (2) scuff plates, (2) hair pin clips, (8) screws, and (4) lock nuts.

Fits select 1957-1979 Chevrolet, GMC, Buick, and Checker vehicles equipped with Small Block Chevrolet (SBC) 265-400 cubic inch engines.

The Spectre 4255 Engine Oil Dipstick is designed to provide accurate oil level monitoring for classic GM small block engines while enhancing engine bay aesthetics. This dipstick is engineered to meet OEM specifications for form, fit, and function, featuring a durable steel housing and an adjustable mounting bracket for a secure installation. The handle and housing are finished in triple chrome plating for a high-luster look, while the dipstick blade features a gold iridite finish to ensure the oil level remains clearly visible.

• Fits 1957-1979 SBC 265, 283, 302, 305, 307, 327, 350, and 400 engines
• Triple chrome-plated steel housing and handle for corrosion resistance
• Gold iridite finish on dipstick blade provides high contrast for easier reading
• Includes adjustable mounting bracket to accommodate various installation needs
• Meets OEM standards for fitment and function
• Manufacturer Part Number: 4255

The Spectre Wire Marker Set (MPN 4244) provides a professional solution for labeling and organizing spark plug wires to ensure accurate ignition system maintenance. These markers are engineered specifically for 8mm diameter wires, allowing you to clearly identify wire sequences at the distributor cap or coil pack to prevent firing order errors.

Each set includes clearly numbered markers that remain legible in the engine bay environment, making troubleshooting and wire tracing simple. To ensure a hassle-free setup, Spectre includes a specialized installation tool designed to slide the markers onto the wires without damaging the outer insulation or boots.

• Fits 8mm spark plug and ignition wires
• Clearly numbered markers for fast wire identification and tracing
• Simplifies distributor cap wiring and firing order organization
• Includes dedicated marker installation tool
• Manufacturer Part Number: 4244

Fits Chevy TBI throttle bodies equipped with an OEM air cleaner spacer.

The Spectre 4215 Air Cleaner Mounting Hardware is a specialized S-stud designed for GM Throttle Body Injection (TBI) applications requiring a specific offset. Featuring a 5-inch offset and 1/4-inch threading, this component allows for precise positioning of the air cleaner assembly to clear engine components or accommodate specific intake configurations. Constructed from durable steel, it is engineered for long-term reliability and secure fastening on both single and dual stud throttle bodies.

• Manufacturer Part Number: 4215
• Offset: 5 inches
• Thread Diameter: 1/4 inch
• Material: High-strength steel
• Compatibility: Single or dual stud TBI throttle bodies
• Installation Note: Designed for use with an OEM air cleaner spacer

The Spectre 3992 Mini-Cone Breather Filter provides effective crankcase ventilation while maintaining a clean, custom look in your engine bay. Designed for versatile application, this 10mm flange filter serves as a high-performance vent for blow-by gases, preventing contaminants from entering the system. The included adjustable worm gear clamp ensures a secure fit on tubes with outside diameters ranging from 3/8 inch to 1/2 inch (8-12mm).

Constructed with durability in mind, the filter features a triple chrome-plated steel top and base for a professional finish. The red synthetic media is pre-dyed for lasting color and comes factory pre-oiled for immediate installation. This unit is an ideal solution for custom intake setups or replacing worn OE crankcase vent filters.

• Part Number: 3992
• Flange Inside Diameter: 10mm (Fits 8mm-12mm / 3/8in-1/2in OD tubes)
• Outer Diameter: 2 inches
• Height: 1-3/4 inches
• Media: Pre-oiled red synthetic fiber
• Material: Triple chrome-plated steel top and base
• Inclusions: One adjustable worm gear clamp

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway.

The Spectre 3991 breather filter, or crankcase vent filter, is designed for universal applications requiring a 10mm (3/8 to 1/2 inch) inlet. This performance filter features a triple chrome-plated steel top and base for a professional finish and long-term durability. It utilizes a pre-dyed black synthetic media that provides consistent color and efficient filtration, arriving factory pre-oiled and ready for immediate installation using the included adjustable worm gear clamp.

• Manufacturer Part Number: 3991
• Flange Inside Diameter: 10mm (Fits 3/8" to 1/2" OD tubing)
• Filter Dimensions: 2-inch Outside Diameter (OD) x 1.75-inch Height
• Media Material: Pre-dyed synthetic media for lasting black color
• Construction: Triple chrome-plated steel top and base
• Installation: Includes adjustable stainless steel worm gear clamp

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. Verify CARB status for your specific vehicle before purchase.

The Spectre 24283 Adjustable Throttle Cable Bracket provides a versatile solution for securing throttle linkages during carburetor swaps. Engineered for maximum flexibility, this bracket is fully adjustable to accommodate various carburetor configurations and heights. To ensure reliable performance and prevent shifting during operation, it features an integrated set screw that locks the bracket firmly in place, eliminating unwanted movement.

This component is designed to work with both 2-barrel and 4-barrel carburetors and is compatible with vehicles running manual or automatic transmissions. The triple chrome-plated finish provides a high-luster look while offering durable corrosion resistance in the engine bay.

• Manufacturer Part Number: 24283
• Compatibility: Fits 2-barrel and 4-barrel carburetors
• Transmission Type: Manual and automatic transmission compatible
• Finish: Triple chrome plated for durability and appearance
• Adjustment: Fully adjustable design for precise cable alignment
• Hardware: Includes set screw to eliminate bracket movement