Fits select 2009-2020 Ford F-150 4WD and 2WD models.

Tuff Country EZ-Ride standard upper control arms are engineered to optimize suspension performance and drivability for the Ford F-150. These arms are a critical addition for trucks equipped with 2-inch to 4-inch suspension lift kits, as they help restore factory alignment specifications and correct suspension geometry. By replacing the stock arms, these components allow for additional suspension travel and help ensure consistent handling characteristics.

• Designed specifically for use with 2-inch to 4-inch suspension lift kits
• Provides additional suspension travel compared to factory arms
• Helps restore proper front-end geometry and alignment specs
• Compatible with both 4x4 and 2wd drivetrain configurations
• Vehicle must be equipped with factory steering knuckles
• Manufacturer Part Number: 20935

Fits select 2007-2024 Chevrolet Silverado, Tahoe, Suburban, and GMC Sierra, Yukon 1500 models.

Level the stance of your GM 1500 truck or SUV with the Tuff Country EZ-Ride 2-inch front leveling kit. Designed for both 4x4 and 2WD applications, this kit utilizes top-mount strut spacers that install above the factory coil assemblies. Because the spacers do not add any additional pre-load to the factory coil springs, the vehicle maintains its original ride quality and suspension geometry.

This kit is an ideal solution for owners looking to clear slightly larger tires (up to 285/70R) without the complexity of a full suspension lift. The bolt-on design ensures a straightforward installation process that requires no strut disassembly and does not necessitate the purchase of new shocks or struts.

• Provides 2 inches of front lift to level the vehicle
• No strut disassembly or coil spring compression required
• Maintains near-factory ride quality by preserving spring pre-load
• Allows for tire sizes up to 285/70R
• Includes (2) coil/strut spacers and all necessary mounting hardware
• Manufacturer Part Number: 12000

Fits 2005-2024 Ford F-250 and F-350 Super Duty 4WD models.

The Tuff Country EZ-Ride Suspension drop pitman arm is engineered to restore proper steering geometry on Ford Super Duty trucks equipped with a suspension lift of 4 inches or more. By lowering the drag link attachment point, this component realigns the steering linkage to be more parallel with the track bar, significantly reducing the "bump steer" effect where the vehicle darts or pulls during suspension travel over uneven terrain.

• Designed specifically for vehicles with 4-inch or greater suspension lifts
• Reduces or eliminates bump steer for more predictable handling and control
• Corrects steering linkage angles to reduce stress on the steering box and tie rod ends
• Heavy-duty construction designed to replace the factory arm on lifted applications
• Manufacturer Part Number: 70205

Fits select 1984-2001 Jeep Cherokee, Grand Cherokee, and Wrangler.

The Tuff Country 1.5-inch coil spring spacers (MPN 41800) provide a reliable and straightforward solution for leveling your Jeep's stance. Engineered for durability, these spacers allow for additional clearance or leveling without the need for a full suspension overhaul. By utilizing the factory spring seats, they maintain the original ride quality and do not require the installation of extended shocks.

• Manufactured from high-density polyurethane for long-lasting durability and corrosion resistance.
• Provides 1.5 inches of lift for leveling the front or rear (fitment varies by model).
• Retains factory ride characteristics and suspension geometry.
• Simple bolt-on installation using original equipment mounting points.
• Compatible with factory-length shock absorbers.
• Includes one pair of spacers.

Tuff Country extended leaf spring center pins are engineered to replace factory hardware when modifying your vehicle's suspension with extra leaves or add-a-leaf kits. These 3/8-inch diameter pins provide the necessary shank length to securely clamp the leaf pack together, ensuring proper alignment and preventing shifting within the spring assembly.

• Extended length designed specifically for add-a-leaf installations and custom leaf packs
• 3/8" diameter pins for heavy-duty leaf spring applications
• Includes two (2) center pins and two (2) matching hex nuts
• High-strength steel construction for reliable tension and durability
• Manufacturer Part Number: 92038

Fits select 2003-2009 Dodge Ram 2500 and 3500 4WD models including Laramie, Power Wagon, SLT, Sport, ST, SXT, and TRX4.

Designed specifically for Dodge Ram heavy-duty trucks equipped with lift kits, this Tuff Country bushing and sleeve kit restores the integrity of your front suspension. These components replace worn or compressed factory-style bushings that often fail under the increased stress of lifted applications and larger off-road tires. By upgrading to polyurethane, you eliminate excessive movement in the control arms, which helps maintain proper alignment and improves steering response.

• Fits both upper and lower front control arms
• Manufactured from high-grade polyurethane for superior durability and chemical resistance
• Includes necessary steel sleeves for a complete installation
• Specifically engineered for vehicles with aftermarket lift kits
• Replaces Tuff Country component set for part number 91304

Fits select 2007-2018 Chevrolet Silverado 1500, Tahoe, Suburban, Avalanche and GMC Sierra 1500, Yukon, and Yukon XL models.

Restore the handling and alignment stability of your lifted truck or SUV with this Tuff Country Replacement Upper Control Arm Bushing and Sleeve Kit. Over time, the bushings in aftermarket control arms can succumb to road grime, heavy articulation, and environmental wear, leading to front-end clunks, steering wander, and uneven tire wear. This kit is specifically engineered to replace worn components in Tuff Country lift kits, ensuring your suspension geometry remains precise and your ride remains quiet.

• Precision Fit: Designed specifically as a direct replacement for Tuff Country upper control arm assemblies on 2007-2018 GM 1500 platform vehicles.
• Complete Service Kit: Includes both the bushings and the necessary steel sleeves to refresh both sides of the vehicle's upper control arms.
• Durable Construction: Built to withstand the increased stresses of lifted 4WD and 2WD applications.
• MPN: 91120

Fits select 2007-2022 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Capstone, Nightshade, and Trail).

Tuff Country add-a-leafs provide a reliable, cost-effective solution for lifting vehicles equipped with leaf springs. These components are designed to be integrated into your existing factory leaf spring packs to provide approximately 2 inches of rear lift. This kit is an excellent choice for Tundra owners looking to compensate for heavy loads or front-mounted accessories like winches and snowplows.

Beyond the increased ride height, these add-a-leafs enhance the vehicle's payload capacity, helping to reduce rear-end sag during towing or hauling. Each kit includes the necessary center pins to ensure a secure installation to the original spring assembly.

• Provides approximately 2 inches of rear lift height
• Mounts directly to existing factory leaf spring packs
• Increases rear payload capacity and improves load handling
• Ideal for trucks equipped with winches or heavy equipment
• Includes necessary center pins for installation
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 85750

Fits 1979-2004 Toyota Pickup and Tacoma (Base, SR5, DLX, and Limited models).

The Tuff Country 85250 Rear Add-a-Leaf Kit provides a reliable and economical solution for lifting the rear of your Toyota truck by approximately 2 inches. These leaves are designed to be installed into your existing OE leaf spring packs to restore arch, level the vehicle, or increase payload capacity—making them ideal for trucks equipped with heavy accessories like winches, campers, or snowplows. By adding support to the factory leaf stack, this kit helps minimize rear-end sag under load without the expense of full replacement spring packs.

• Provides approximately 2 inches of additional rear lift height
• Increases rear payload capacity and improves load handling
• Mounts directly to existing factory leaf spring packs
• Includes two (2) center pins for a complete installation
• Sold as a pair (set of 2)
• Manufacturer Part Number: 85250

Fits 1999-2024 Ford F-250 and 1999-2023 F-350 Super Duty trucks.

The Tuff Country 83950 Rear Add-a-Leaf Kit provides an economical way to lift your Super Duty and increase rear payload capacity. These leaf springs are engineered to be installed into your existing factory leaf packs, making them an ideal solution for trucks frequently carrying heavy loads, or those equipped with rear-mounted equipment that require additional support. By adding these leaves to the factory stack, you gain height without the cost of a full replacement leaf pack.

• Provides approximately 3 inches of rear lift height
• Increases rear payload capacity for heavy-duty hauling and towing
• Bolts directly to existing factory leaf springs for straightforward installation
• Includes necessary center pins for secure mounting
• Cost-effective alternative to complete replacement leaf packs
• Sold as a pair
• Manufacturer Part Number: 83950

Fits select 2009-2024 Ford F-150, F-250/F-350 Super Duty, Expedition, and Explorer models.

The Tuff Country 82550 Add-a-Leaf kit provides an economical and effective solution for lifting vehicles equipped with rear leaf springs. Designed to be integrated into your existing factory leaf packs, these springs provide approximately 1.5 inches of additional rear height while increasing the vehicle's payload capacity. This makes them an ideal choice for trucks and SUVs equipped with heavy accessories like winches or snowplows, helping to eliminate sagging and restore a level stance under load.

• Product Function: Adds 1.5 inches of lift to the rear suspension and increases payload capacity.
• Construction: High-quality steel leaf springs designed for long-term durability.
• Installation: Mounts directly to the existing factory leaf spring pack.
• Included Hardware: Comes as a pair and includes the necessary center pins for installation.
• Part Number: 82550

Fits 2003-2024 Dodge Ram 2500 and Ram 3500 4WD models.

Tuff Country Add-a-Leafs provide an economical solution for restoring ride height or adding a 1.5-inch lift to your truck's rear suspension. These leaf springs are engineered to integrate directly into your existing factory leaf pack, increasing the spring rate to help compensate for heavy equipment such as winches or snowplows and improving overall payload capacity.

By mounting to the original leaf springs, this pair of Add-a-Leafs helps eliminate rear-end sag under load while maintaining suspension integrity. This is a reliable upgrade for drivers who require additional support for towing or hauling without the expense of a full replacement leaf pack.

• Provides approximately 1.5 inches of additional rear lift height
• Increases rear spring rate and payload capacity
• Installs directly into existing factory leaf packs
• Includes new center pins for a secure installation
• Suitable for heavy-duty applications including plowing and towing
• Manufacturer Part Number: 82450

Fits select 1980-2004 Ford F-250 and F-250 Super Duty 4WD models.

Tuff Country add-a-leafs provide an economical solution for lifting leaf-sprung vehicles without replacing the entire spring pack. These components are designed to be installed into your existing factory leaf spring stacks, providing 1.5 inches of front-end lift. This additional height helps level the vehicle and provides necessary clearance for trucks equipped with heavy front-end accessories such as winches or snowplows.

Beyond the lift height, these add-a-leafs increase the front spring rate, which helps restore ride height and improves payload capacity. Each kit is manufactured to precise tolerances for a reliable fit and includes the necessary center pins for a straightforward installation.

• Manufacturer Part Number: 82112
• Lift Height: 1.5 Inches
• Position: Front
• Quantity: Pair (Set of 2)
• Includes: Center pins for installation
• Application: Ideal for vehicles with heavy front-end equipment
• Function: Increases payload capacity and restores ride height

Fits select 1999-2024 Chevrolet Silverado 1500, GMC Sierra 1500, and 2006-2009 Hummer H3 models.

The Tuff Country 81350 Add-a-Leaf kit provides an efficient and economical way to lift your vehicle's rear suspension by 2 inches. These leaves are designed to be integrated into your existing factory leaf packs, offering a modest lift while helping to restore ride height or compensate for heavy loads. This kit is an ideal solution for vehicles equipped with heavy accessories like winches, service bodies, or snowplows that require additional support to prevent sagging.

• Lift Height: 2-inch rear lift
• Enhanced Support: Increases payload capacity and reduces rear-end sag under load
• Installation: Mounts directly to existing factory leaf springs
• Hardware Included: Includes necessary center pins for a complete installation
• Application: Compatible with 2WD and 4WD 1500-series trucks
• MPN: 81350

Fits select 1999-2013 Ford F-250/F-350 Super Duty and Dodge/Ram 2500/3500 4WD models.

The Tuff Country front dual shock kit is designed to enhance suspension control by adding secondary shock mounting positions to your heavy-duty truck. This configuration is engineered specifically for lifted vehicles equipped with oversized tires, where additional dampening is required to manage increased unsprung weight and maintain front-end stability.

By distributing the damping workload across two shocks per side, this kit reduces heat build-up and provides a more controlled ride during off-road excursions or high-speed highway travel. The brackets are designed for a straightforward bolt-on installation, mounting to factory points to simplify the upgrade process.

• Increases dampening performance for lifted trucks with oversized tires
• Distributes suspension workload across multiple shock absorbers per side
• Bolt-on application for a reliable, precise fit
• Manufacturer Part Number: 75350
• Note: Shock absorbers are sold separately

Fits select 2009-2024 Dodge and Ram 2500/3500 4WD models.

The Tuff Country EZ-Ride Suspension drop pitman arm is engineered to restore proper steering geometry on heavy-duty trucks equipped with a 4-inch suspension lift or higher. By lowering the drag link attachment point, this component realigns the steering linkage to be more parallel with the track bar, significantly reducing the erratic steering feedback known as bump steer.

Designed as a direct replacement for the factory arm, this drop pitman arm helps maintain controlled handling and predictable steering response on modified 4WD trucks. It is a critical component for maintaining tire life and driver confidence in lifted applications.

• Specifically designed for vehicles with 4 inches of lift or more
• Helps eliminate bump steer by correcting drag link angles
• Improves overall handling and steering predictability
• Direct replacement for the original equipment (OE) pitman arm
• Manufacturer Part Number: 70504

Fits 2003-2008 Dodge Ram 2500 and 3500 4WD models (Laramie, SLT, Sport, ST, SXT, Power Wagon, TRX4).

The Tuff Country 70502 Drop Pitman Arm is engineered to correct steering geometry on lifted heavy-duty Dodge trucks. When a vehicle is lifted 4 inches or more, the increased angle of the drag link often results in bump steer and diminished handling. This drop pitman arm replaces the factory component to restore a more parallel steering angle, significantly reducing steering feedback from road irregularities and improving overall control.

• Designed for 2003-2008 Dodge Ram 2500/3500 4WD with 4-inch or higher lifts
• Reduces or eliminates bump steer by correcting steering linkage angles
• Improves handling and tracking on lifted applications
• Direct replacement for the factory pitman arm
• Manufacturer Part Number: 70502

Fits select 1980-1997 Ford F-150, F-250, F-250 HD, F-350, Bronco, Bronco II, and Explorer models.

The Tuff Country 70200 EZ-Ride Suspension drop pitman arm is engineered to correct steering geometry on Ford trucks and SUVs equipped with a 4-inch or taller suspension lift. By lowering the attachment point of the drag link, this component helps restore the factory steering angle, significantly reducing the common issue of bump steer and improving overall directional stability on the road or trail.

• Designed specifically for vehicles with 4 inches or more of suspension lift
• Replaces the factory pitman arm to realign steering linkage
• Helps eliminate bump steer for more predictable handling
• Heavy-duty construction for off-road durability
• Manufacturer Part Number: 70200

This drop pitman arm is a critical addition to any high-clearance suspension system to ensure the vehicle remains safe and easy to control during suspension travel. It bolts directly to the steering box output shaft as a replacement for the OE arm.

Fits select 1988-2020 Chevrolet, GMC, Ford, RAM, and Jeep trucks and SUVs equipped with 0 to 5 inches of rear suspension lift. The Tuff Country SX8000 Nitro Gas shock absorber is engineered for full-size applications where consistent dampening and reduced fade are critical. By utilizing a nitrogen gas charge, this shock limits internal oil foaming (fading) during rapid cycling, ensuring quicker response and more stable handling across variable terrain compared to standard hydraulic shocks.

Built for long-term durability, the SX8000 features a robust twin-tube construction and a 5/8-inch piston rod to withstand the stresses of towing and off-road use. Polyurethane bushings are included to provide a firm mounting point, reducing the deflection and vague feel often associated with worn OE rubber bushings. This shock is a high-performance replacement for trucks requiring extended travel or improved control.

• Nitro gas charged to reduce shock fade and improve recovery time
• Twin-tube construction for increased durability on and off-road
• Large 5/8-inch diameter piston rod for superior strength
• Polyurethane bushings included for improved stability and service life
• Designed specifically for rear applications with 0-5" of suspension lift
• Manufacturer Part Number: 61301
• Limited Lifetime Warranty

Note: Shock boots are sold separately. This part is sold individually.

Fits select 2000-2023 Toyota Tacoma and Tundra models equipped with 3-inch rear lift blocks.

Tuff Country 57950 rear axle u-bolts are engineered specifically for Toyota trucks running suspension lift kits. These extended u-bolts provide the critical clamping force required to secure the rear axle to the leaf spring pack when using 3-inch lift blocks. To ensure longevity in harsh environments, each bolt features a zinc-plated finish for superior corrosion resistance against road salt and debris.

• Designed for vehicles with 3-inch rear suspension lift blocks
• Zinc-plated finish resists corrosion and oxidation
• Includes four (4) u-bolts with matching nuts and washers
• Manufacturer Part Number: 57950

Fits select 1986-2006 Toyota Pickup, Tacoma, and Tundra models equipped with 2.5-inch wide u-bolts and 3-inch rear lift blocks.

These Tuff Country rear axle u-bolts are engineered specifically for vehicles with suspension lift kits. When installing 3-inch lift blocks, factory u-bolts are often too short to safely secure the leaf spring pack to the axle housing. This kit provides the extended length required to maintain proper clamping force and suspension geometry on your lifted Toyota.

Constructed for durability and ease of installation, these u-bolts feature a zinc-plated finish that resists corrosion from road salt and moisture. This ensures the hardware remains structural and easier to service over the life of the vehicle.

• Includes four (4) heavy-duty u-bolts
• Includes matching nuts and washers for a complete installation
• Zinc-plated finish for superior corrosion resistance
• Specifically designed for 2.5-inch u-bolt applications with 3-inch lift blocks
• Manufacturer Part Number: 57850

Fits 2005-2020 Toyota Tundra models with a two-piece rear driveshaft. This Tuff Country EZ-Ride carrier bearing drop kit is designed to eliminate driveline vibration and shudder often experienced after installing a suspension lift. By lowering the carrier bearing mounting point, this kit restores proper driveshaft alignment and corrects the pinion angle to ensure smooth operation.

• Corrects driveline geometry on lifted Toyota Tundra applications
• Helps eliminate takeoff shudder and highway-speed vibrations
• Specifically engineered for vehicles equipped with two-piece rear driveshafts
• Includes all necessary spacers and mounting hardware for a complete installation
• Manufacturer Part Number: 55914

Fits 2005-2006 Toyota Tundra Base, Limited, and SR5 (4x4 and 2WD).

The Tuff Country 5-inch suspension lift kit is engineered to provide the ground clearance required for 35" x 11.5" tires while maintaining proper suspension geometry. This system utilizes heavy-duty replacement steering knuckles to keep your front end aligned and within factory specifications. To ensure a controlled ride on and off the pavement, this kit includes Tuff Country SX8000 nitrogen-charged shocks, which are specifically valved for larger tire and wheel combinations.

• 5-inch suspension lift for improved ground clearance and off-road capability
• Heavy-duty replacement steering knuckles maintain proper front-end geometry
• Includes front coil/strut spacers and rear lift components
• Comes with SX8000 nitrogen-charged shocks for a smooth, controlled ride
• Accommodates up to 35" x 11.5" tires (minor trimming may be required)
• Compatible with both 2WD and 4WD drive systems
• Manufacturer Part Number: 55907KN

Fits 2005-2006 Toyota Tundra Base, Limited, and SR5 models (2WD and 4WD).

The Tuff Country 55907KH 5-inch lift kit is engineered to provide substantial ground clearance for your Toyota Tundra without compromising factory ride quality or off-road durability. This comprehensive system utilizes high-strength replacement steering knuckles to maintain proper geometry, ensuring an effective and reliable installation for both 2WD and 4WD configurations.

This kit includes Tuff Country SX6000 twin-tube gas shocks, which are specifically valved to improve damping performance and ride comfort across various terrains. By focusing on critical component integrity rather than just height, Tuff Country delivers a suspension solution that stands up to heavy-duty use while keeping your truck's handling predictable.

• Precision Engineering: Includes replacement steering knuckles to retain factory-style suspension geometry.
• Performance Shocks: Set of SX6000 shocks included for enhanced ride control.
• Complete System: All necessary hardware and components for a safe 5-inch lift.
• Built to Last: Backed by a manufacturer's limited lifetime warranty.
• MPN: 55907KH

Fits 2022-2024 Toyota Tundra and 2022-2024 Toyota Sequoia (All trims including TRD Pro). This Tuff Country suspension lift kit provides a 3-inch front lift and a 1.5-inch rear lift, leveling your vehicle's stance while creating clearance for larger wheel and tire combinations.

Engineered to maintain factory ride quality, this kit improves cornering stability by reducing excessive body roll and nose dive under braking. The bolt-on design allows for a straightforward installation with no cutting or drilling required, making it an ideal solution for owners looking to fit 35" x 12.5" tires without permanent modifications to the chassis.

• Front Lift: 3.0 inches
• Rear Lift: 1.5 inches
• Maximum Tire Size: 35" x 12.5"
• Installation: No cutting or drilling required
• Compatibility Note: Not compatible with models equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS)
• Construction: Proudly Made in the USA
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 53220

Fits 2024 Toyota Tacoma and 2024 Toyota Land Cruiser models.

The Tuff Country 52924 1.5-inch front leveling kit is engineered to eliminate the factory rake of the 2024 Toyota Tacoma and Land Cruiser, providing a level stance and extra clearance for larger tire fitment. This kit addresses the common issue of excessive dive and roll during cornering, improving overall handling characteristics while maintaining the original equipment ride quality.

Each spacer is constructed from high-strength 1/4-inch steel and finished with a durable black powder-coat for maximum corrosion resistance. Designed for a straightforward installation, this kit features a simple bolt-on design that retains the factory front and rear struts. Unlike many other lift options, this system requires no strut disassembly, significantly reducing install time and complexity.

• Lift Height: 1.5 inches (Front)
• Material: Precision-fabricated 1/4-inch steel
• Finish: Durable black powder-coat
• Installation: Bolt-on; no strut disassembly required
• Components: Front leveling spacers and necessary hardware
• Manufacturing: Proudly Made in the USA
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 52924

Fits 2022-2024 Toyota Tundra and 2023-2024 Toyota Sequoia models including SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

Achieve a level stance and clear larger tires on your Toyota truck or SUV with this Tuff Country 2-inch front leveling kit. Designed to eliminate the factory rake, this kit provides additional ground clearance while maintaining the factory ride quality. The system is engineered for a simple bolt-on installation that retains the factory front and rear struts without requiring complex strut disassembly.

Constructed from high-strength 0.25-inch steel and finished in a durable black powder coat, this leveling kit is built to withstand off-road use and harsh weather conditions. By leveling the front suspension, this kit also helps reduce excessive nose-dive during braking and body roll during cornering.

• Manufacturer Part Number: 52220
• Lift Height: 2.0 inches (Front)
• Material: 0.25-inch plate steel
• Finish: Black Powder-Coat
• Installation: Simple bolt-on; no strut disassembly required
• Warranty: Limited Lifetime Warranty
• Country of Origin: Made in the USA