Fits 1994-2002 Dodge Ram 2500 and 3500 4WD with factory contact overloads and 5.5-inch rear lift blocks.

This Tuff Country Rear Axle U-Bolt Kit (MPN 37755) is specifically engineered for second-generation Dodge Ram heavy-duty trucks utilizing 5.5-inch lift blocks. When adding significant rear lift, the factory hardware is no longer long enough to safely capture the leaf spring pack, lift block, and axle housing. These extended U-bolts provide the necessary reach and clamping force to maintain suspension geometry and safety.

Each bolt is finished in a protective zinc plating to resist corrosion and road salt, ensuring longevity and ease of maintenance. This complete kit provides the hardware necessary for the rear axle assembly, replacing worn or undersized OE components with vehicle-specific hardware designed for lifted applications.

• Designed specifically for models with factory contact overload springs
• Extended length for vehicles equipped with 5.5-inch rear lift blocks
• Zinc-plated finish for superior corrosion and weather resistance
• Complete set includes (4) U-bolts with matching nuts and washers
• Direct-fit installation for rear axle housing
• Manufacturer Part Number: 37755

Fits select 2013-2024 Ram 2500 and 3500 4WD models. This Tuff Country front leveling kit provides a 2-inch lift to eliminate the factory rake, bringing the front end of your truck level with the rear for an aggressive stance and improved ground clearance.

Designed to maintain your vehicle's factory ride quality, this kit (MPN 32909) features front shock extension brackets. These brackets allow you to retain your original equipment (OE) shocks or struts, eliminating the immediate need for aftermarket replacements. The coil spacers are engineered for a precise fit and straightforward installation on heavy-duty Ram suspension systems.

• Raises the front of the vehicle 2 inches for a level stance
• Includes front shock extension brackets to reuse factory shocks
• Maintains factory ride quality and handling characteristics
• Bolts directly to factory mounting points
• Manufacturer Part Number: 32909

Note: Not compatible with models equipped with factory rear air suspension.

Fits 2019-2024 Ram 1500.

Level the stance of your truck and gain additional tire clearance with the Tuff Country 2-inch front leveling kit. Engineered specifically for the 2019-2024 Ram 1500, this kit (MPN 32907) includes specialized ride height sensor links to maintain proper suspension geometry and electronic system calibration. The bolt-on design allows for a straightforward installation that requires no strut disassembly, cutting, or drilling, ensuring your factory front and rear struts are retained for original equipment ride quality.

• Provides 2 inches of front lift to eliminate factory rake
• Includes ride height sensor links for proper suspension integration
• Simple bolt-on installation with no strut disassembly required
• Maintains factory ride characteristics and retains OE struts
• Allows for the use of up to 33 in. x 12.5 in. tires
• No cutting or drilling required for installation
• Manufacturer Part Number: 32907
• Proudly made in the USA
• Backed by a Limited Lifetime Warranty

Fits 2009-2024 Dodge and Ram 1500 4x4 models, including Laramie, Big Horn, Rebel, Tradesman, and TRX.

Tuff Country EZ-Ride Suspension standard upper control arms are engineered to restore proper suspension geometry and alignment on Ram 1500 trucks equipped with 2-inch to 4-inch suspension lift kits. These arms provide the additional suspension travel required for off-road performance while correcting ball joint angles that are often compromised by lifting the vehicle.

Designed for trucks retaining factory steering knuckles, these control arms (MPN 30935) come complete with front bump stop brackets to prevent over-articulation and protect your suspension components during full compression. By replacing the stressed factory units, you ensure a better range of motion and improved handling characteristics on your lifted application.

• Specifically designed for 2-inch to 4-inch suspension lift kits
• Includes front bump stop brackets to control suspension travel
• Restores proper alignment and steering geometry
• Provides additional suspension travel compared to factory arms
• Compatible with factory steering knuckles
• Durable construction for reliable off-road performance
• Manufacturer Part Number: 30935

Fits select 1994-2022 Dodge Ram 1500, 2500, and 3500 models.

When installing a 4-inch to 6-inch suspension lift, the increased ride height often causes the factory front sway bar to bind, negatively affecting suspension articulation and ride quality. This Tuff Country sway bar drop kit provides the necessary relocation brackets to lower the factory sway bar, correcting the operating angle and restoring proper suspension geometry.

Engineered to bolt directly to the frame, these brackets ensure the sway bar maintains its function without interference. This kit is a critical component for maintaining a smooth ride and preventing premature wear on sway bar links and bushings in lifted applications.

• Specifically designed for vehicles with 4-inch to 6-inch lift kits
• Relocates the factory front sway bar to eliminate binding
• Heavy-duty steel construction for long-term durability
• Maintains proper suspension geometry and articulation
• Includes all necessary sway bar drop brackets
• Manufacturer Part Number: 30928

Fits select 1998-2013 Dodge and Ram 1500, 2500, and 3500 4WD trucks. These Tuff Country EZ-Ride Suspension front sway bar end links are designed to replace bent or broken factory units, providing a significant durability upgrade for lifted or stock-height trucks.

Featuring a threaded body design, these links offer precise adjustability to accommodate vehicles ranging from stock height up to a 3-inch lift; they are also compatible as replacement components for Tuff Country lift kits ranging from 2 to 6 inches. The integrated heim joints are a critical performance upgrade, replacing restrictive rubber bushings to reduce suspension binding and significantly improve axle articulation during off-road use.

• Replaces factory sway bar end links to improve suspension geometry
• Heim joints eliminate binding and allow for increased articulation
• Threaded body provides adjustability for stock height up to 3-inch lifts
• Compatible with Tuff Country 2-inch to 6-inch lift kits
• Durable construction designed for 4WD applications
• Manufacturer Part Number: 30927

Fits 1999-2004 Ford F-250 and F-350 Super Duty 4WD models.

Tuff Country axle U-bolts are specifically engineered for Ford Super Duty trucks equipped with aftermarket suspension lift kits. Maintaining proper clamping force is essential for axle alignment and suspension integrity. These heavy-duty U-bolts replace worn or undersized hardware, ensuring your front leaf spring pack remains securely mated to the axle housing under load.

Constructed for durability, these bolts feature a zinc-plated finish to resist corrosion and oxidation in harsh underbody environments. This complete kit provides the necessary hardware for a professional installation or maintenance of your lifted front end.

• Zinc-plated finish for maximum corrosion resistance
• Designed for 1999-2004 Ford F-250/F-350 Super Duty 4WD applications
• Optimized for use with suspension lift kits
• High-strength steel construction for reliable clamping force
• Manufacturer Part Number: 27900

Includes: (4) U-bolts, (8) nuts, and (8) washers.

Fits select 1980-2016 Ford F-250 and F-350 4WD models equipped with 3-inch to 4-inch rear lift blocks.

Tuff Country rear axle U-bolts are engineered as essential hardware for trucks running aftermarket suspension lift kits. When installing 3-inch to 4-inch lift blocks, factory U-bolts are typically too short to safely secure the leaf spring pack and block to the axle housing. These extended U-bolts provide the necessary length and tensile strength to maintain a rigid connection, preventing axle wrap and component shifting under load.

Each bolt is zinc plated to provide superior corrosion resistance against road salt and moisture. This complete kit includes all necessary high-strength nuts and washers for a straightforward installation on the rear axle.

• Specifically sized for vehicles with 3" to 4" rear lift blocks
• Corrosion-resistant zinc plated finish for long-term durability
• Direct replacement for undersized OE hardware in lifted applications
• Includes (4) U-bolts, (8) nuts, and (8) washers
• Manufacturer Part Number: 27854

Fits 1983-1997 Ford Ranger 4WD models (Stock Height or Lifted with Add-a-Leaf).

Tuff Country rear axle u-bolts are engineered as high-strength replacements for your Ford Ranger. These u-bolts provide the critical clamping force required to secure the rear axle housing to the leaf spring pack, whether you are running a factory suspension setup or have installed a rear add-a-leaf kit. Each component is finished with a durable zinc plating to resist corrosion and maintain structural integrity in harsh underbody environments.

• Direct fit for 1983-1997 Ford Ranger 4WD
• Compatible with stock height or add-a-leaf rear lift applications
• Zinc plated finish for maximum corrosion resistance
• Complete kit includes four (4) u-bolts, nuts, and washers
• Manufacturer Part Number: 27853

Fits select 2015-2020 Ford F-150 models including King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, and XLT (2WD/4WD).

This Tuff Country Uni-Ball lift kit provides a 3-inch lift for your F-150, delivering improved ground clearance and a more aggressive stance without compromising ride quality. The kit features high-strength upper control arms equipped with uni-ball joints, which offer significantly more durability and a greater range of motion than factory ball joints. This setup corrects suspension geometry after lifting, ensuring better handling and longevity for your front-end components.

• 3-inch lift height for increased tire clearance and a leveled look
• Heavy-duty upper control arms with high-strength uni-ball joints
• Maintains factory ride quality by utilizing original front struts
• Compatible with both 2WD and 4WD configurations
• Excludes Ford Raptor models
• Includes rear shocks (retains factory front shocks)
• Manufacturer Part Number: 23035

Fits select 2009-2024 Ford F-150 (2WD/4WD) including Platinum, XL, XLT, Lariat, and King Ranch models.

Level the stance of your Ford F-150 with this Tuff Country EZ-Ride Suspension 2-inch front leveling kit. This kit is engineered to eliminate the factory rake, providing a more aggressive look and clearing larger tires without compromising the vehicle's suspension geometry. Designed for a straightforward installation, these spacers mount directly above the factory struts. This approach eliminates the need for strut disassembly or replacement, ensuring your F-150 retains its original factory ride quality.

• Provides 2 inches of front lift to level vehicle stance
• Simple bolt-on installation above the factory struts
• No strut disassembly or coil compressor required
• Maintains factory ride quality and handling characteristics
• Allows for use of original OE shocks and struts
• Made in the USA
• Manufacturer Part Number: 22909

Fits 1980-1996 Ford F-250 4WD models equipped with a 4-inch front lift and 4-bolt axle pivot mounting.

Tuff Country axle pivot drop brackets are engineered to correct alignment geometry on lifted Ford F-250 trucks. When a suspension lift is added to the Twin Traction Beam (TTB) front end without dropping the factory axle pivots, it often results in excessive positive camber that cannot be corrected with standard bushings. These brackets drop the pivot points to restore proper suspension travel, improve handling, and prevent uneven tire wear.

• Specifically designed for vehicles with 4-inch front lift kits
• Restores factory-like alignment specs and axle geometry
• Constructed for heavy-duty 4WD applications
• Simple bolt-on installation to factory 4-bolt mounting points
• Includes adjustable camber bolts for precision fine-tuning
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 20854

Fits 1997 Ford F-250 4WD (Base, Lariat, XL, XLT).

Tuff Country Axle Pivot Drop Brackets (MPN 20853) are specifically engineered to restore proper suspension geometry on 1997 Ford F-250 4WD trucks equipped with a 2-inch front lift and 5-bolt mounting. These brackets solve the common alignment issues and excessive positive camber that occur when lifting a vehicle without dropping the factory axle pivots. By repositioning the Twin Traction Beam (TTB) axles, these brackets ensure your front end can be aligned to factory specifications.

• Specifically designed for 2-inch front lift applications
• Compatible with 5-bolt axle pivot mounting points
• Corrects alignment geometry to prevent uneven tire wear
• Includes adjustable camber bolts for precise final tuning
• Simple bolt-on installation requires no permanent vehicle modifications

Includes: One pair of axle pivot drop brackets (driver and passenger side) and adjustable camber bolts.

Fits 1980-1996 Ford F-250 4WD models with a 2-inch front suspension lift and 4-bolt axle pivot mounting.

Tuff Country axle pivot drop brackets are engineered to correct the front-end geometry on Ford Twin Traction Beam (TTB) suspensions. When these vehicles are lifted, the axle pivot points must be lowered to prevent excessive positive camber and ensure the wheels can be returned to factory alignment specifications. These heavy-duty steel brackets provide the necessary drop for a 2-inch lift, improving tire wear and handling characteristics.

• Designed specifically for Ford F-250 4WD trucks with 4-bolt pivot mounts
• Corrects suspension geometry and camber issues caused by front-end lifts
• Includes adjustable camber bolts for precise alignment fine-tuning
• Durable construction to handle off-road and heavy-duty use
• Straightforward bolt-on installation to factory mounting points
• Manufacturer Part Number: 20852

Included: One pair of axle pivot drop brackets and adjustable camber adjustment bolts.

Fits select 1980-1996 Ford F-150 and Bronco, and 1984-1990 Ford Bronco II (4WD models with 4-inch front lift kits).

Tuff Country axle pivot drop brackets are engineered to restore proper suspension geometry on lifted Ford Twin Traction Beam (TTB) front ends. These brackets are a critical solution for vehicles experiencing excessive positive camber or alignment difficulties after installing a 4-inch suspension lift. By lowering the axle pivot points to match the lift height, these brackets allow the front tires to sit flat on the pavement, improving tire life and steering stability.

• Specifically designed for Ford TTB front ends with 4-inch front lift kits
• Corrects positive camber and geometry issues caused by suspension lifts
• Heavy-duty steel construction ensures durability in off-road environments
• Includes adjustable camber bolts for precise alignment fine-tuning
• Simple bolt-on installation requires no welding
• Sold as a pair for both driver and passenger side axles
• Manufacturer Part Number: 20844

Fits select 1980-1996 Ford F-150, Bronco, and Bronco II models equipped with a 2-inch front suspension lift.

Tuff Country axle pivot drop brackets are engineered to correct front-end suspension geometry on lifted Ford trucks and SUVs. When installing a suspension lift on the Twin I-Beam or Twin Traction Beam front end, the factory axle pivot points must be lowered to maintain proper camber. These brackets relocate the pivot points to restore alignment specifications, preventing excessive tire wear and improving overall handling. This kit is designed for bolt-on installation and includes adjustable camber bolts to provide the fine-tuning necessary for a precise alignment.

• Specifically designed for vehicles with a 2-inch front lift kit
• Relocates axle pivot points to correct camber and alignment issues
• Includes adjustable camber bolts for precision tuning
• Simple bolt-on installation to factory mounting points
• Durable construction designed for lifted truck and SUV applications
• Manufacturer Part Number: 20842
• Sold as a pair

Fits 1983-1997 Ford Ranger and 1991-1997 Ford Explorer 4WD models equipped with a 4-inch front suspension lift kit.

Tuff Country axle pivot drop brackets are engineered to solve the alignment challenges inherent to lifting Ford's Twin Traction Beam (TTB) front end. Lifting these vehicles without dropping the factory axle pivot points often results in excessive positive camber that standard adjustments cannot fix. These brackets (MPN 20816) relocate the axle pivots to restore proper suspension geometry, ensuring your vehicle tracks straight and prevents premature tire wear.

Constructed for durability and precision, these brackets are designed as a direct bolt-on solution. To provide the highest level of adjustment, this pair includes adjustable camber bolts, allowing for the fine-tuning required to achieve factory-spec alignment on a modified suspension.

• Specifically engineered for 4-inch front lift applications
• Relocates factory axle pivot points to correct suspension geometry
• Includes adjustable camber bolts for precise alignment tuning
• Durable, heavy-duty construction for off-road reliability
• Simple bolt-on installation process
• Manufacturer Part Number: 20816
• Includes one pair of axle pivot drop brackets and hardware

Fits select 1988-2010 Chevrolet and GMC K1500, K2500, Silverado, and Sierra models equipped with 4-inch rear lift blocks.

Tuff Country rear axle U-bolts are engineered specifically for trucks with aftermarket suspension lift kits. When installing 4-inch blocks, factory U-bolts are too short to safely secure the axle to the leaf spring pack. These extended-length U-bolts provide the necessary reach and clamping force to maintain suspension integrity. Each bolt is zinc plated for superior corrosion resistance, ensuring durability against road salt and moisture.

• Designed specifically for vehicles using 4-inch rear lift blocks
• Zinc plated finish for maximum corrosion resistance
• Includes four (4) U-bolts with required nuts and washers
• Direct replacement for undersized bolts in lifted applications
• Manufacturer Part Number: 17857

Fits 2004-2012 Chevrolet Colorado and GMC Canyon 4WD models across all trim levels, including Z71 and Z85 packages.

The Tuff Country EZ-Ride 4-inch lift kit is engineered to provide additional ground clearance and room for larger tires without compromising ride quality. This suspension system features replacement driver and passenger-side steering knuckles and robust front and rear cross members. A heavy-duty skid plate connects the cross members to provide essential protection for the front differential while increasing chassis stability.

A key advantage of this Tuff Country design is that it allows the factory torsion bars to remain in their original locations, eliminating the need for relocation and simplifying the installation process. To ensure a smooth ride, this kit includes SX8000 cellular gas shocks, specifically valved for lifted applications to provide consistent damping and control.

• Manufacturer Part Number: 14045KN
• Lift Height: 4 Inches
• Included Shocks: Tuff Country SX8000 Cellular Gas Shocks
• Main Components: Steering knuckles, front and rear cross members, and differential skid plate
• Installation Detail: Maintains factory torsion bar location; no relocation required
• Warranty: Limited Lifetime Warranty

Fits select 1973-1987 Chevrolet and GMC Blazer, Jimmy, K10, K15, K1500, and Suburban 4WD models.

Level up your square-body GM truck or SUV with the Tuff Country 3-inch suspension lift kit components. This essential hardware package (MPN 13710) is engineered to provide a 3-inch lift using rear blocks, allowing for increased ground clearance and a more aggressive stance without compromising factory ride quality. Designed for durability and precise fitment, these components ensure your suspension geometry remains reliable for both daily driving and off-road use.

• Lift Height: 3 Inches
• Inclusion: Rear lift blocks and necessary mounting hardware
• Required Components: This kit excludes front leaf springs and shocks (sold separately)
• Construction: High-strength materials designed for off-road durability
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 13710

Please note: This component set is designed to be used in conjunction with specific front springs and shocks to complete the suspension lift. It replaces or supplements factory components to achieve the desired height while maintaining safe operating tolerances.

Fits 2015-2024 Chevrolet Colorado and GMC Canyon (All Models).

Eliminate the factory nose-down rake and achieve a level stance with the Tuff Country 1.25-inch front leveling kit. This kit is engineered to provide additional front-end clearance without compromising vehicle dynamics, using upper coil spring spacers to lift the front of your truck to match the rear height.

Built for durability and precision, the kit features polished aluminum pre-load spacers and powder-coated steel strut spacers. The bolt-on design allows for a straightforward installation that requires no cutting, drilling, or strut disassembly. This ensures you can return the vehicle to stock if needed while maintaining near-factory ride quality during daily use.

• Provides 1.25 inches of front lift to level the vehicle
• Constructed from high-quality billet aluminum and powder-coated steel
• Simple bolt-on installation with no strut disassembly required
• No cutting or drilling of factory components necessary
• Maintains factory ride quality and handling characteristics
• Includes polished aluminum pre-load spacers and steel strut spacers
• Manufacturer Part Number: 12918

Fits 1988-1997 Chevrolet K2500 and K3500 4WD trucks equipped with a 4-inch or 6-inch suspension lift.

The Tuff Country 10850 Front Sway Bar End Link Kit is engineered to correct the suspension geometry on lifted Heavy Duty Chevy trucks. When adding a 4" to 6" lift, the factory end links are no longer long enough to maintain the sway bar at the proper operating angle, which leads to binding and restricted articulation. These extended links restore the correct relationship between the sway bar and the front axle, ensuring the anti-roll system functions effectively without binding during suspension travel.

• Direct replacement for factory end links on lifted applications
• Extended length specifically sized for 4-inch to 6-inch lift kits
• Reduces or eliminates sway bar binding for improved suspension cycling
• High-strength construction to handle the increased leverage of larger tires
• Complete kit includes necessary hardware for installation
• Manufacturer Part Number: 10850