Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Your cart
-
0-9
-
A
-
B
-
R
-
S
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Wilwood
Wilwood Engineering has been a cornerstone of high-performance braking for decades, delivering precise stopping power for everything from championship-winning race teams to aggressive street machines. This collection brings together Wilwood's core components—calipers, rotors, brake pads, master cylinders, and essential accessories—engineered to improve pedal feel, reduce fade, and shave unsprung weight.
- Forged aluminum calipers—lightweight, stiff, and built to handle extreme heat cycles without flex.
- Stainless steel pistons—resist corrosion and fluid boil better than standard steel, keeping engagement consistent lap after lap.
- Compound-specific pads—from street-friendly ceramics to full-race metallic compounds, each pad shape is matched to its caliper for even pad wear.
- Two-piece rotors (where applicable)—aluminum hats with directional vanes pull air through the disc, lowering operating temps under repeated heavy braking.
- Master cylinders & pedal assemblies—available in multiple bore sizes so you can tune pedal ratio and effort to your driving style.
Whether you are refreshing a single axle or building a complete system, look for bolt-on kits that reuse OEM mounting points whenever possible, and always confirm pad compound and rotor diameter match your intended use—autocross, road course, or daily driver.
727 products
727 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Fits 1958-1964 Chevrolet Impala models equipped with internal disc or drum parking brake systems. The Wilwood Parking Brake Cable Kit (MPN 330-11986) provides a complete, high-reliability solution for restoring or upgrading your vehicle's parking brake linkage. This kit is specifically engineered to bridge the gap between the brake assemblies and the factory or aftermarket handle mechanism, ensuring positive engagement and safety.
- Vehicle Compatibility: Designed specifically for 1958-1964 Chevrolet Impala full-size applications.
- Internal Setup: Engineered for use with internal-style parking brakes found in many disc and drum configurations.
- Durable Assemblies: Includes heavy-duty cable and sheath assemblies designed to resist stretching and environmental corrosion.
- Complete Components: Kit comes with the equalizer assembly, clevises, and all necessary mounting hardware for a professional installation.
- Manufacturer Part Number: 330-11986
Fits select 2006-UP Honda Civic.
The Wilwood 330-11982 Parking Brake Cable Kit is engineered to simplify the installation of Wilwood Combination Parking Brake (CPB) calipers. This kit provides the necessary mechanical link between the vehicle's OE parking brake handle and the Wilwood calipers, ensuring reliable engagement and proper tensioning. Every component is selected for durability and precise fitment, eliminating the guesswork often associated with custom brake plumbing and cable routing.
- Specifically designed for use with Wilwood CPB (Combination Parking Brake) calipers
- Includes high-quality cable and sheath assemblies
- Includes all necessary clevises and mounting hardware for a complete installation
- Replaces or adapts factory parking brake cables for aftermarket caliper compatibility
- Manufacturer Part Number: 330-11982
This Wilwood Parking Brake Cable Clevis is a direct replacement or supplemental component for the Wilwood Universal Disc/Drum Parking Brake Cable Kit (MPN 330-9371). Engineered for durability in high-tension applications, it ensures a secure connection between the parking brake cable and the actuator lever.
- Manufactured from high-strength steel for reliable mechanical performance
- Zinc-plated finish provides superior corrosion resistance against road grime and moisture
- Sold individually (Each)
- Specifically designed for use with Wilwood cable kit 330-9371
- Manufacturer Part Number: 330-11486
Fits 1994-2004 Ford Mustang. This Wilwood CPB Caliper Cable Kit (330-11282) includes all the specialized components required to connect your vehicle's parking brake handle to Wilwood Combination Parking Brake (CPB) calipers. Engineered for precise fitment on the SN95 and New Edge chassis, this kit ensures proper cable routing and tension for reliable brake engagement.
- Designed specifically for compatibility with Wilwood CPB calipers
- Heavy-duty cable and sheath assemblies for long-term durability
- Complete kit includes necessary clevises and installation hardware
- Facilitates a clean, professional installation on 94-04 Mustang rear brake upgrades
- Manufacturer Part Number: 330-11282
Fits 2005-2010 Ford Mustang models equipped with internal disc/drum parking brake systems.
The Wilwood 330-11221 Parking Brake Cable Kit is a comprehensive solution designed to simplify the installation of your parking brake system. Engineered for precision and reliability, this kit provides the necessary linkage between your vehicle's parking brake lever and the brake assemblies, ensuring positive engagement and holding power.
Constructed with high-strength components to withstand constant tension, this kit replaces worn or incompatible factory lines when performing brake upgrades or maintenance. It includes everything needed to complete the installation without the need for custom fabrication or sourcing individual hardware pieces.
- Designed specifically for internal parking brake configurations
- Includes durable cable and sheath assemblies
- Includes equalizer assembly, clevises, and all necessary mounting hardware
- Direct fit for 2005-2010 Mustang chassis
- Manufacturer Part Number: 330-11221
The Wilwood CPB Series Parking Brake Cable Kit (330-10966) provides a complete hardware solution for integrating your vehicle's factory parking brake system with Wilwood Combination Parking Brake (CPB) calipers. Designed specifically for Honda Civic and Acura Integra applications, this kit is essential for maintaining a functional and effective mechanical parking brake after upgrading your rear calipers.
- Engineered specifically for Wilwood Combination Parking Brake (CPB) caliper installations
- Provides all necessary cables and specialized hardware for a secure connection
- Direct fitment for Honda Civic and Acura Integra parking brake handle assemblies
- Maintains critical mechanical leverage for consistent parking brake engagement
- Manufacturer Part Number: 330-10966
The Wilwood CPB Caliper Cable Kit (330-10915) provides the specialized components required to integrate a functional parking brake system on Mini Cooper models equipped with Wilwood Combination Parking Brake calipers. This kit replaces or adapts the factory cable setup to ensure reliable mechanical engagement and a secure hold when the vehicle is stationary.
- Designed specifically for use with Wilwood Combination Parking Brake (CPB) calipers
- Includes durable cable and sheath assemblies for long-term service life
- Complete with all necessary clevises and mounting hardware
- Ensures proper mechanical leverage and cable travel for the parking brake system
- Manufacturer Part Number: 330-10915
Wilwood Pad Shim Kits are engineered to mitigate Noise, Vibration, and Harshness (NVH) by dampening the vibrations transmitted between the rotor and the brake pad. These shims serve as a critical interface that absorbs high-frequency resonance before it translates into audible brake squeal.
Built with a durable steel and elastomeric composite construction, these shims are designed to withstand the thermal and mechanical stresses of performance driving while maintaining their dampening properties. This kit provides an industry-standard solution for achieving quieter braking performance without sacrificing pedal feel.
- Manufacturer Part Number: 300-8460
- Fits Wilwood SL Style brake pads
- Composite steel and elastomeric construction for superior vibration absorption
- Reduces NVH (Noise, Vibration, and Harshness)
- Includes 4 shims, sufficient for one axle (two calipers)
Wilwood Pad Shim Kits are engineered to isolate and dampen vibrations transmitted between the brake rotor and the pad. This specialized construction is an industry-standard solution for reducing Noise, Vibration, and Harshness (NVH) in performance and street vehicle platforms. By creating a physical barrier between the piston and the pad backing plate, these shims help eliminate harmonic resonance and brake squeal.
- Reduces brake noise (NVH) through vibration dampening
- Constructed from durable steel and elastomeric materials
- Specifically designed for Wilwood DL, NDL, and Dynapro Radial brake pad profiles
- Includes four (4) shims, providing coverage for two calipers
- Manufacturer Part Number: 300-8259
Protect your aluminum caliper bodies from pad "dig-in" and premature wear with the Wilwood 300-5875 Pad Wear Plate. These plates provide a durable, smooth sliding surface for the brake pads, ensuring consistent engagement and preventing the pads from gouging the softer aluminum housing during heavy braking cycles.
Constructed from a specialized stainless steel alloy, these wear plates are engineered for maximum abrasion resistance and longevity under high-heat conditions. This component is a critical service part for maintaining the structural integrity and performance of your Wilwood braking system.
- Manufacturer Part Number: 300-5875
- Material: Stainless Steel Alloy
- Caliper Fitment: Billet and Forged Dynalite 4 Piston, Dynalite Single, and Dynapro Single
- Pad Compatibility: Designed for use with 0.49" to 0.50" thick pads
- Primary Function: Eliminates pad-to-body wear on aluminum caliper housings
Maintain the integrity of your braking system with the Wilwood DP6 Series Caliper Retainer Pin and Clip Kit. This essential hardware kit is designed specifically for DP6 calipers, providing the necessary pins and safety clips to keep brake pads securely seated within the caliper body. Replacing worn or lost retainer hardware is critical for preventing pad rattle, ensuring consistent brake engagement, and maintaining safety during high-performance or street use.
- Engineered specifically for Wilwood DP6 series brake calipers
- Includes high-strength retainer pins and locking safety clips
- Ensures proper brake pad alignment and security
- Direct replacement for worn or damaged factory hardware
- Manufacturer Part Number: 300-17719
The Wilwood Electronic Parking Brake (EPB) Caliper Switch Kit (300-15936) provides a reliable, clean-mount solution for controlling your rear EPB calipers. This kit is essential for vehicles equipped with Wilwood's motor-driven parking brake systems, allowing for easy activation and release of the brake motors from the driver's seat.
Built to handle the specific electrical requirements of the EPB system, this kit simplifies your wiring and cockpit integration. The included adhesive-backed "On/Off" sticker ensures a professional finish and clear identification on your dashboard or console, making it ideal for custom builds, restomods, and performance rear brake conversions.
- Manufacturer Part Number: 300-15936
- Designed for use with Wilwood Electronic Parking Brake (EPB) calipers
- Includes heavy-duty toggle switch for secure motor engagement
- Includes high-visibility On/Off identification sticker
- Provides a clean, professional solution for custom interior mounting
This Wilwood Pad Pin Retainer Clip Kit (300-14504) provides the critical hardware needed to maintain the integrity of your performance braking system. These clips are designed to secure the brake pad pins within the caliper body, preventing them from migrating or backing out under high-vibration or extreme heat conditions during spirited driving or track use.
Each kit contains four individual clips (internal component part # 310-3634), making it a complete service solution for a pair of calipers. Replacing worn, fatigued, or lost retainer clips is an essential safety step during brake pad changes or caliper maintenance to ensure the pad pins remain locked in place.
- Manufacturer Part Number: 300-14504
- Compatible Caliper Series: Wilwood D8, DP6, TX6R, and AERO
- Quantity: Set of 4 clips
- Includes individual component part number: 310-3634
- Ensures secure brake pad pin retention and system safety
Wilwood Rotor and Hat Register Adapter Rings are precision-engineered components designed to center one-piece iron rotors or aluminum hat assemblies accurately onto vehicle-specific hub or axle registers. Proper registration is critical for ensuring rotating concentricity, which helps eliminate brake vibration and promotes even pad wear across the rotor face.
This adapter (MPN: 300-12846) features a 2.28-inch internal diameter to match the hub register. It is specifically designed for installation into hats or rotors featuring a 3.06-inch center hole with the necessary counterbore for a secure, flush-mount fitment.
- Manufacturer Part Number: 300-12846
- Internal Register Diameter: 2.28 inches
- Required Hat/Rotor Bore: 3.06 inches (with counterbore)
- Function: Locates brake hats or 1-piece rotors on hub/axle registers
- Materials: High-strength construction for thermal stability under braking
The Wilwood 300-11181 Stop Light Pressure Switch is a dual-pole hydraulic switch designed to trigger brake light illumination based on line pressure. Engineered for precision and reliability, this switch completes the electrical circuit once system pressure reaches between 60 and 100 PSI.
Built with a durable plated steel body, it features a standard 1/8-27 NPT male inlet for easy installation into hydraulic brake lines. This component is the direct replacement switch for the Wilwood 260-11179 Combination Proportioning Valve assembly but is also suitable for a wide range of custom automotive braking applications requiring a pressure-activated signal.
- Manufacturer Part Number: 300-11181
- Thread Size: 1/8-27 NPT Male
- Activation Range: 60-100 PSI
- Circuit Type: Dual Pole
- Construction: Plated Steel
- Fitment: Replacement for Wilwood 260-11179 valve assembly
Upgrade your vehicle's braking system with the Wilwood Remote Tandem Master Cylinder Kit. This assembly (MPN: 261-16963-BK) is engineered for high-performance applications requiring a remote reservoir setup, providing the safety and reliability of a dual-circuit system in a compact, durable package.
The 1.12-inch bore is specifically sized to provide the necessary fluid volume for larger multi-piston calipers, ensuring a firm pedal and consistent response. This kit includes a mounting bracket and a proportioning valve, streamlining the installation process and allowing for precise brake bias tuning. The master cylinder features a sleek black finish for superior corrosion resistance and a professional look under the hood.
- Precision 1.12-inch bore for high-volume fluid displacement
- Tandem dual-circuit design for enhanced safety and redundancy
- Integrated proportioning valve for adjustable front-to-rear brake bias
- Includes heavy-duty mounting bracket for secure installation
- Durable black e-coat finish resists corrosion and brake fluid
- Manufacturer Part Number: 261-16963-BK
The Wilwood Remote Tandem Master Cylinder Kit (MPN: 261-16962-BK) provides a professional-grade solution for custom brake systems and vehicle builds requiring a remote reservoir setup. Featuring a 1-inch bore, this master cylinder is engineered to provide the necessary fluid volume and pressure for a wide range of multi-piston caliper configurations, ensuring a firm pedal feel and reliable stopping power.
This kit includes a specialized mounting bracket and an adjustable proportioning valve, allowing builders to fine-tune front-to-rear brake bias for optimal chassis balance. The tandem chamber design ensures the safety of two independent hydraulic circuits. The assembly is finished in a durable black E-coat to resist corrosion and maintain a clean aesthetic under the hood.
- 1-inch cylinder bore diameter for consistent hydraulic pressure
- Tandem circuit design for redundant braking safety
- Includes mounting bracket and adjustable proportioning valve
- Designed for use with remote fluid reservoirs
- Corrosion-resistant black finish
- Manufacturer Part Number: 261-16962-BK
The Wilwood 261-16796-BK Compact Tandem Master Cylinder Kit provides a comprehensive solution for upgrading the hydraulic system in Mopar applications. Engineered for both performance and aesthetics, this kit features a compact body design specifically suited for tight engine bays where clearance is a primary concern. The 15/16-inch bore size is ideally matched for manual brake systems or vehicles using small-diameter power boosters, providing the necessary hydraulic leverage for consistent stopping power.
This kit simplifies complex plumbing by including a pre-installed combination proportioning valve and mounting bracket assembly. The black finish offers a sleek, professional appearance while providing a durable barrier against the elements. Each kit is supplied with an adjustable pushrod to ensure proper pedal height and engagement for your specific setup.
- Manufacturer Part Number: 261-16796-BK
- Bore Size: 15/16in (23.81mm)
- Finish: Black E-coat
- Configuration: Tandem reservoir for dual-circuit safety
- Included Components: Tandem master cylinder, combination proportioning valve, mounting bracket, stainless steel fluid tubes, and adjustable pushrod
- Application: Designed for Mopar master cylinder mounting patterns
The Wilwood Compact Tandem Master Cylinder Kit (261-15523-BK) provides a complete hydraulic solution for pushrod-actuated Mustang brake systems. Featuring a 15/16-inch bore, this master cylinder is engineered to provide balanced pedal effort and displacement, making it an ideal choice for vehicles running specific disc brake configurations where a firmer pedal feel is required.
This kit simplifies plumbing and mounting by including a pre-installed adjustable proportioning valve and a custom-designed bracket. The high-pressure die-cast body is finished in a durable black e-coat, ensuring both corrosion resistance and a clean aesthetic for your engine bay.
- Manufacturer Part Number: 261-15523-BK
- Bore Size: 15/16"
- Design: Compact Tandem (dual reservoir)
- Finish: Black E-coat
- Included Components: Mounting bracket and adjustable proportioning valve
- Application: Designed specifically for Mustang (Pushrod) applications
The Wilwood Compact Tandem Master Cylinder (MPN: 261-14964-BK) provides a space-saving hydraulic solution for dual-circuit braking systems. Designed with a 1.12-inch bore, this unit is ideal for applications requiring specific volume and pressure characteristics for performance calipers. Its compact design offers crucial clearance in tight engine bays or against firewalls where traditional tandem cylinders may not fit.
This comprehensive kit includes a specific mounting bracket and a proportioning valve, simplifying the plumbing process and allowing for precise front-to-rear brake bias adjustment. The high-pressure die-cast body features a durable black finish for long-lasting corrosion resistance and a clean, professional aesthetic.
- Bore Size: 1.12 inch
- Finish: Black E-coat
- Configuration: Compact Tandem
- Includes: Mounting bracket and proportioning valve
- Manufacturer Part Number: 261-14964-BK
The Wilwood Compact Tandem Master Cylinder kit (MPN: 261-14963-P) provides a high-performance braking solution for applications where engine bay space is limited. This assembly features a 1-inch bore, designed to offer the hydraulic output necessary for a wide range of custom brake setups while maintaining a small footprint.
This comprehensive kit includes a mounting bracket and a proportioning valve, simplifying the installation and plumbing process for custom builds or restorations. The master cylinder body is finished in a high-luster ball burnished coating, providing a durable and professional appearance that complements high-end engine bays and street rod aesthetics.
- Manufacturer Part Number: 261-14963-P
- Bore Size: 1.00 inch
- Finish: Ball Burnished
- Design: Compact Tandem Master Cylinder
- Includes: Proportioning valve and mounting bracket
- Application: Ideal for space-constrained master cylinder mounting
The Wilwood Compact Tandem Master Cylinder kit (MPN: 261-14963-BK) provides a high-performance braking solution designed for applications where space is at a premium. With its 1-inch bore diameter, this master cylinder offers the necessary hydraulic pressure for a wide range of custom brake configurations, ensuring a firm and consistent pedal feel.
This complete assembly simplifies plumbing and installation by including a pre-mounted proportioning valve and mounting bracket. The tandem reservoir design maintains separate circuits for front and rear brakes, while the compact body allows for easier fitment in tight engine bays or against crowded firewalls. Finished in a durable black coating, it provides long-lasting corrosion resistance and a clean, professional appearance.
- Master Cylinder Type: Compact Tandem
- Bore Size: 1.00 inch
- Finish: Black E-coat
- Included Components: Mounting bracket, proportioning valve, and pushrod
- Manufacturer Part Number: 261-14963-BK
The Wilwood Compact Tandem Master Cylinder kit provides a high-performance hydraulic solution for vehicles with limited engine bay clearance. Engineered with a 7/8-inch bore, this master cylinder is ideal for specific brake pedal ratios and caliper requirements where a balance between pedal effort and pressure is critical. The tandem chamber design provides the safety of redundant braking circuits in a compact, space-saving footprint.
This all-in-one kit streamlines your brake system plumbing by including a mounting bracket and a proportioning valve, allowing for precise adjustment of front-to-rear brake bias. The assembly comes with a pushrod and is finished in a durable black E-coat for superior corrosion resistance and a professional look under the hood.
- Manufacturer Part Number: 261-14961-BK
- Bore Size: 7/8-inch (0.875")
- Finish: Black E-coat
- Design: Compact Tandem Outlet
- Includes: Mounting bracket, proportioning valve, and pushrod
- Ideal for custom brake conversions and space-constrained installations
Fits select Early Ford Mustang models with manual brake systems.
The Wilwood HV Tandem Master Cylinder Kit (MPN: 261-14158-BK) provides a complete, professional-grade solution for upgrading brake pressure actuation and fluid control. This kit integrates Wilwood’s aluminum tandem chamber master cylinder with a combination proportioning valve, mounting bracket, and precision-bent fluid tubes to simplify installation. The tandem master cylinder features a slotted flange and included rod assembly, making it a direct bolt-on for manual brake configurations on early Mustang platforms.
Built for long-term durability and consistent performance, the assembly features a black E-coat finish on the master cylinder and bracket for superior corrosion resistance. The combination proportioning valve maintains full isolation between front and rear fluid circuits while simplifying the plumbing and wiring required for brake bias adjustments. All necessary hardware is included, featuring stainless steel fluid tubes with pre-installed plated steel nuts and stainless steel button head fasteners for a rust-free, clean finish.
- Master Cylinder Bore: 15/16 inch
- Finish: Black E-coat
- Configuration: Tandem Chamber for manual brake systems
- Bracket: Left-hand (L/H) mounting bracket included
- Hardware: Precision-bent stainless steel tubes and stainless button head fasteners
- Safety: Isolated front and rear fluid circuits
- Manufacturer Part Number: 261-14158-BK
This Wilwood HV Tandem Master Cylinder Kit is engineered for early Ford Mustang manual brake applications, providing a complete solution for brake pressure actuation and fluid control. The kit integrates a lightweight aluminum tandem chamber master cylinder with a combination proportioning valve, specifically designed to simplify plumbing and brake bias adjustments in one package.
The included mounting bracket and precision-bent stainless steel fluid tubes ensure a clean, bolt-on installation to the factory firewall. The combination valve maintains full isolation between the front and rear fluid circuits, while the included pushrod assembly makes it compatible with manual system applications. Finished with a durable black E-coat on the bracket and valve, this kit provides long-lasting corrosion resistance and a professional appearance.
- Manufacturer Part Number: 261-14158
- Bore Size: 15/16-inch
- Fitment: Early Ford Mustang models with manual brake systems
- Fluid Tubes: Precision-bent stainless steel with plated steel tube nuts
- Valve Finish: Black E-coat for durability and corrosion resistance
- Hardware: Stainless steel button head fasteners and dedicated pushrod included
The Wilwood High Volume (HV) Tandem Master Cylinder Kit (MPN: 261-13626-BK) simplifies brake system plumbing by packaging a premium 15/16" bore tandem master cylinder with a combination proportioning valve, left-hand mounting bracket, and precision-bent stainless steel fluid tubes. Designed for both manual and power brake applications, this kit features a slotted flange for direct bolt-on compatibility with Chrysler, Corvette, GM, and Ford Mustang mounting patterns.
The included combination proportioning valve maintains full isolation between front and rear fluid circuits while simplifying wiring and brake bias adjustments. All components feature a durable black E-coat finish for superior corrosion resistance and a clean aesthetic. The kit includes stainless steel button head fasteners and a pushrod for a complete installation.
- Master Cylinder Bore: 15/16 inch
- Finish: Black E-coat
- Configuration: Tandem Chamber High Volume (HV)
- Bracket Orientation: Left-Hand (LH) Mount
- Hardware: Stainless steel fluid tubes, plated steel tube nuts, and button head fasteners
- Fitment: Slotted flange fits Chrysler, Corvette, GM, and Ford Mustang patterns
- Compatibility: Suitable for manual or power brake systems
- Manufacturer Part Number: 261-13626-BK
Fits early Ford Mustang models with manual brake systems. This comprehensive Wilwood HV Tandem Master Cylinder Kit (MPN 261-13272-BK) provides a complete solution for upgrading brake pressure actuation and fluid control. The kit features a 7/8-inch bore tandem chamber master cylinder finished in a durable black E-coat for long-lasting corrosion resistance and a clean, performance look.
- Precision Engineering: The tandem master cylinder utilizes a slotted flange mounting and includes a rod assembly for a direct, bolt-on installation to factory mounting points.
- Integrated Proportioning: Includes a black E-coated combination proportioning valve that simplifies wiring and brake bias adjustments while maintaining full isolation between front and rear fluid circuits.
- Premium Hardware: Features precision-bent stainless steel fluid tubes with pre-installed plated steel tube nuts and stainless steel button-head fasteners for a secure, rust-free installation.
- Kit Contents: Aluminum tandem chamber master cylinder (7/8" bore), combination proportioning valve, left-hand mounting bracket, stainless steel fluid tubes, and all necessary mounting hardware.
Designed for Early Ford Mustang manual brake applications, the Wilwood HV Tandem Master Cylinder Kit (MPN 261-13272) provides a comprehensive solution for upgrading brake pressure actuation and fluid control. This kit pairs Wilwood's high-performance aluminum tandem master cylinder with a combination proportioning valve and specific mounting bracket for a precise, professional installation.
The 7/8-inch bore master cylinder features a slotted flange mounting and includes a rod assembly for a direct bolt-on installation. To simplify plumbing, the kit includes a combination proportioning valve that maintains full isolation between front and rear fluid circuits while easing bias adjustments. The package is rounded out with precision-bent stainless steel fluid tubes and durable stainless steel button-head fasteners, ensuring a rust-free and reliable setup.
- 7/8-inch bore aluminum tandem master cylinder
- Combination proportioning valve for front/rear circuit isolation
- L/H black E-coated mounting bracket and hardware
- Precision-bent stainless steel fluid tubes with plated steel tube nuts
- Complete with pushrod assembly and button head fasteners
- Compatible with manual brake systems
- Manufacturer Part Number: 261-13272
The Wilwood HV Tandem Master Cylinder Kit provides a complete, bolt-on solution for modernizing your vehicle's brake pressure actuation and fluid control. This comprehensive kit includes an aluminum tandem chamber master cylinder, a combination proportioning valve, a left-hand mounting bracket, stainless steel fluid tubes, and all necessary mounting hardware.
Featuring a slotted flange, the master cylinder is designed for easy installation on various OE mounts, including Chrysler, Corvette, GM, and Ford Mustang bolt patterns. This system is fully compatible with both manual and power brake applications. The integrated combination proportioning valve simplifies brake adjustments and wiring while maintaining essential isolation between the front and rear fluid circuits.
- Master Cylinder: 7/8-inch bore tandem chamber aluminum body
- Finish: Durable black E-coat on master cylinder, bracket, and valve
- Hardware: Includes pushrod and stainless steel button-head fasteners
- Fluid Lines: Precision-bent stainless steel tubes with plated steel tube nuts
- Fitment: Compatible with many GM, Ford, Chrysler, and Corvette manual/power brake patterns
- MPN: 261-13271-BK
Fits select Chrysler, Corvette, GM, and Ford Mustang models with manual or power brake systems.
The Wilwood HV Tandem Chamber Master Cylinder kit offers a refined solution for brake pressure actuation and fluid control. This comprehensive package includes a 1-1/8" bore aluminum master cylinder, a combination proportioning valve, a left-hand mounting bracket, and precision-bent stainless steel fluid tubes. Designed with a slotted flange, this master cylinder facilitates a direct bolt-on installation for many common OE mounts, including those found on classic GM, Ford, and Mopar platforms.
The included combination proportioning valve significantly simplifies plumbing and wiring for custom brake systems while maintaining critical isolation between the front and rear fluid circuits. Both the master cylinder and the bracket feature a durable black E-coat finish to provide long-lasting corrosion resistance. The kit is rounded out with stainless steel button head fasteners and plated steel tube nuts for a professional, secure installation.
- Manufacturer Part Number: 261-13270-BK
- Bore Size: 1-1/8 in
- Master Cylinder Material: Aluminum
- Finish: Black E-coat
- Valve Type: Combination Proportioning Valve
- Bracket Position: Left-Hand Mount
- Fluid Lines: Stainless Steel
- System Compatibility: Manual or Power Brakes
Can’t Find the Part You Need?
Our catalog represents only a portion of the automotive products available through our supplier network. If you cannot find a specific part, brand, or application on our website, submit a request below, and our team will help source it for you.
Please include as much information as possible, such as your vehicle's year, make, model, trim, engine, desired brand, or part number, to help us quickly identify the correct product.
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.