Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Does not include spider gears
• Standard open carrier case
• Fits Ford 10.25 in.
• Fits Ford 10.25"

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Fits Jeep Wrangler JK/Liberty/Nitro, front
• 3.73 and up gear ratio only
• Standard Open Carrier Case
• Fits Jeep Liberty Front
• 3.73 And Up Ratio Only
• Includes spider gears

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Not compatible with ABS applications
• Not Compatible w/ABS Applications
• Does not include spider gears
• Standard open carrier case
• 4.56 and up ratio only
• Fits Dana Spicer 60

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Includes ring gear bolts, carrier shim kit, roll pin and cover gasket
• Includes Ring Gear Bolts; Carrier Shim Kit; Roll Pin And Cover Gasket
• Fits Dana Spicer 44 with 30 spline axles
• Fits Dana Spicer 44 w/30 Spline Axles
• Does not include spider gears
• Standard open carrier case
• 3.92 and up ratio only

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Fits Dana Spicer 44 with 30 spline axles
• Fits Dana Spicer 44 w/30 Spline Axles
• Does not include spider gears
• Standard open carrier case
• 3.92 and up ratio only

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Includes ring gear bolts, carrier shim kit, roll pin, and cover gasket
• Includes Ring Gear Bolts; Carrier Shim Kit; Roll Pin And Cover Gasket
• Does not include spider gears
• Standard open carrier case
• 3.73 and up ratio only
• Fits Dana Spicer 30

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Does not include spider gears
• Standard open carrier case
• 3.73 and up ratio only
• Fits Dana Spicer 30

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Does not include spider gears
• Standard open carrier case
• 1.560 in. Side Gear Bore
• 3.54 ratio and up only
• 1.560" side gear bore
• Fits AMC Model 35

This Part Fits:

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

• Replacement Front Standard Open Carrier Case
• 3.73 and up
• Jeep JK
• Dana 30
• Front

This Part Fits:

Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and other general maintenance items. You can count on Yukon to fulfill all your differential small parts needs.

• For Toyota 8 in. Differential
• For Toyota 8" Differential
• CV Axle Carrier Bushing
• With Clamshell Design

This Part Fits:

Yukon Gear & Axle Spin Free Kits increase fuel efficiency and reduce maintenance costs. These kits replace the failure prone and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in fuel efficiency because there are fewer rotating parts in the drivetrain. Less parasitic drag equals better MPG. Spin Free Kits also include low-profile Yukon Hardcore Premium Locking Hubs, for quick changes between two-wheel and four-wheel drive.

• Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, premium locking hubs, high quality bearings, high quality seals and all hardware for installation.
• Incl. Premium Locking Hubs; High Quality Bearings; High Quality Seals And All Hardware For Installation
• Incl. New Wheel Hubs; Spindles; High Strength Yukon 4340 Chrome-Moly Outer Axles
• Fits 2012-2017 Dodge 2500/3500

This Part Fits:

Yukon Gear & Axle Spin Free Kits increase fuel efficiency and reduce maintenance costs. These kits replace the failure prone and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in fuel efficiency because there are fewer rotating parts in the drivetrain. Less parasitic drag equals better MPG. Spin Free Kits also include low-profile steel hubs for quick changes between two-wheel and four-wheel drive.

• Includes new wheel hubs, spindles, high-strength Yukon 4340 Chromoly outer axles, premium locking hubs, high-quality bearings, high-quality seals, and all hardware for installation.
• Incl. Premium Locking Hubs; High Quality Bearings; High Quality Seals And All Hardware For Installation
• Incl. New Wheel Hubs; Spindles; High Strength Yukon 4340 Chrome-Moly Outer Axles
• Fits Jeep Wrangler And Cherokee Front
• 5 X 4.5 in. Bolt Pattern
• 5 x 4.5" bolt pattern

This Part Fits:

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

• Cut To Length Design Fits 34 in./36.5 in. Applications
• Cut to length design fits 34"- 36.5" applications
• Fits Dana Spicer 60 Differential
• 4340 chromoly construction
• 8 X 3.96 in. Bolt Pattern
• 8 x 3.96" bolt pattern
• 30 spline

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

• Heavy duty 4340 chromoly construction
• Fits Dana 44 M220 Differential
• Double drilled flange
• For right-hand side
• Measures 33.9 in.
• Measures 33.9”
• 32 spline

This Part Fits:

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

• Includes axle bearing and seal, ABS ring, retainer, and studs
• Includes Axle Bearing And Seal; ABS Ring; Retainer; And Studs
• Heavy duty 4340 chromoly construction
• Fits Dana 44 Differential
• 5 X 5.0 in. Bolt Pattern
• 5 x 5.0” bolt pattern
• For right-hand side
• Measures 32.6 in
• Measures 32.6”
• 32 spline

This Part Fits:

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

• Includes axle shaft, axle bearing and seal, ABS ring, retainer, and studs
• Includes Axle Shaft; Axle Bearing And Seal; ABS Ring; Retainer; And Studs
• Heavy duty 4340 chromoly construction
• Fits Dana 44 Differential
• 5 X 5.0 in. Bolt Pattern
• 5 x 5.0” bolt pattern
• For left-hand side
• Measures 32.6 in
• Measures 32.6”
• 32 spline

This Part Fits: