Fits select 1997-2005 Chevrolet S10, Blazer, GMC Sonoma, Jimmy, and Oldsmobile Bravada models.

The USA Standard Gear ZA G26050549 axle shaft is a high-strength replacement for factory rear axles in GM 7.625" differentials. Manufactured from high-quality alloys and subjected to advanced heat-treating processes, this shaft is designed to exceed original equipment standards for durability and torsional strength. Whether you are restoring a daily driver or upgrading a trail-ready 4WD truck, this axle provides the reliability needed for diverse street and off-road conditions.

• Length: 28-13/16 inches
• Spline Count: 28
• Wheel Bolt Pattern: 5 Lug
• Differential Application: GM 7.625"
• Installation: Replaces worn or snapped factory axle shafts
• Manufacturer Part Number: ZA G26050549

Fits select 1989-1996 Buick Roadmaster, Cadillac Brougham and Fleetwood, and Chevrolet Caprice and Impala SS.

This USA Standard replacement axle shaft provides a direct-fit solution for worn or damaged factory components on GM B-body and D-body vehicles. Engineered to meet factory tolerances, this shaft restores reliable power delivery to the wheels. It is precision machined to ensure proper fitment with your existing differential and wheel hub assembly, replacing shafts that have suffered from bearing surface wear or spline damage.

• Manufacturer Part Number: ZA G26018080
• Overall Length: 30 3/8 inches
• Spline Count: 30
• Bolt Pattern: 5 x 5 metric pattern
• Direct replacement for original equipment axle shafts

Fits select 1980-1991 Chevrolet and GMC Blazer, K10, K1500, V10, and V1500 4WD trucks and SUVs.

The USA Standard Axle Shaft (ZA G14039547) is engineered as a dependable replacement for worn, twisted, or broken factory shafts. This high-strength steel shaft is precision-machined to ensure a perfect fit into your vehicle's differential, restoring proper power delivery to the wheels. Designed for the rigors of 4WD use, it provides a cost-effective alternative to OEM parts without compromising on structural integrity or fitment.

• Manufacturer Part Number: ZA G14039547
• Spline Count: 28-Spline
• Length: 31.5 inches
• Construction: High-strength steel for durability
• Application: Direct-fit replacement for select GM 4WD vehicles

Fits select 1965-1979 Chevrolet Camaro, Chevelle, Chevy II, and Nova models with GM 8.2" or 8.5" rear differentials.

This USA Standard Gear replacement axle shaft is designed to restore drivetrain integrity for classic GM passenger cars. Engineered as a direct-fit solution, this shaft replaces worn or damaged factory components to ensure smooth power delivery and reliable operation. Each axle is built to meet high manufacturing standards, providing a dependable alternative to salvaged or fatigued original equipment.

• Differential Fitment: GM 8.2in & 8.5in Passenger Car
• Length: 29 1/2in (29.5")
• Spline Count: 28
• Hub Diameter: 2.780in Brake Pilot
• Manufacturer Part Number: ZA G1255803-SH

Fits select 1968-1981 Chevrolet Camaro, Chevelle, Monte Carlo, and Pontiac Firebird with GM 8.2" and 8.5" 10-bolt rear differentials.

This USA Standard Gear replacement axle shaft is engineered to restore drivetrain reliability in classic GM passenger car applications. Designed as a direct-fit solution, this 28-spline axle is precision-machined to ensure proper engagement with the differential side gears and a secure fit within the housing. It provides a cost-effective alternative to expensive custom axles while maintaining the structural integrity required for street performance and daily driving.

• Manufacturer Part Number: ZA G1255802-SH
• Differential Fitment: GM 8.2" & 8.5" (10-Bolt)
• Axle Length: 30 1/8"
• Spline Count: 28
• Hub Diameter: 2.780"
• Application: Rear Axle Passenger Car

Fits select 2003-2011 Ford Crown Victoria models including Police Interceptor, LX, and Fleet trims.

Restore your vehicle's drivetrain with this USA Standard Gear replacement axle shaft. Engineered to match factory tolerances, this 31-spline shaft is a direct-fit solution for damaged or worn OE shafts. Each shaft is heat-treated to ensure long-term durability under standard or heavy-duty use cases, such as those found in fleet or police service.

• Manufacturer Part Number: ZA F880063
• Spline Count: 31
• Length: 34 3/8 inches
• Fits 8.8-inch rear differentials
• Note: ABS tone ring is not included and must be reused or sourced separately

Whether you are maintaining a daily driver or a fleet vehicle, this shaft provides the reliability needed for 2003 and newer Ford Panther platform rear-wheel-drive configurations.

Fits 1997-2004 Ford F-150 (Base, FX4, Harley-Davidson, King Ranch, Lariat, Lightning, STX, XL, XLT) with the 8.8-inch rear differential.

This USA Standard axle shaft (MPN ZA F880033) is a direct-fit replacement for the passenger side of your vehicle. Designed to meet or exceed the performance of original equipment, this shaft restores drivetrain integrity to vehicles with worn, bent, or damaged factory axles. It is precision-machined to ensure proper fitment with factory bearings and wheel hubs.

• Part Number: ZA F880033
• Differential: Ford 8.8-inch
• Location: Right Hand Side (Passenger)
• Length: 31-7/8 inches
• Spline Count: 31
• Wheel Bolt Pattern: 5-Lug
• Bearing Journal: 1.620 inches

Vehicle Fitment:

Fits 1990-2003 Dodge B150, B250, B3500, Ram 1500 Van, and Ram 2500 Van equipped with the Chrysler 9.25-inch rear differential.

This USA Standard Gear replacement axle shaft provides a reliable, direct-fit solution for restoring your vehicle's drivetrain. Engineered to meet or exceed factory specifications, this 5-lug axle addresses common issues such as bent flanges or worn bearing surfaces. It is designed specifically for the 31-spline Chrysler 9.25-inch housing common in full-size Dodge B-Series and Ram Vans.

• Manufacturer Part Number: ZA C52067708
• Differential: Chrysler 9.25 inch
• Spline Count: 31
• Length: 32-5/8 inches
• Lug Pattern: 5-Lug

Fits select 1988-2017 Cadillac Escalade, Chevrolet Silverado/Tahoe/Suburban, and GMC Sierra/Yukon models equipped with an 8.25-inch IFS front differential.

Setting up a front differential correctly requires precise control over carrier bearing preload and ring-and-pinion backlash. The Yukon Gear YT A08 spanner tool is engineered specifically for GM 8.25" IFS housings, allowing you to engage and rotate the threaded side adjusters with ease. This tool replaces the need for makeshift methods, ensuring you can reach the exact torque or position required for a long-lasting gear install.

• Specifically designed for GM 8.25" IFS differentials
• Updated 3-pin design for improved engagement and durability
• Compatible with all production years of the 8.25" IFS housing
• Essential for setting carrier bearing preload and gear backlash
• Manufacturer Part Number: YT A08

Fits select 1999-2015 Ford F-150, F-250, F-350 Super Duty, E-250, E-350, and Excursion models with the 10.5" full-float rear differential.

This Yukon Gear & Axle hub bolt is an essential component for maintaining the drivetrain integrity of your Ford 10.5" full-floating rear end. These bolts secure the axle shaft flange directly to the hub assembly, requiring precise tolerances to handle the torque and load demands of heavy-duty truck applications. Whether you are replacing a single damaged fastener or performing a complete axle service, Yukon small parts provide the reliable fitment needed for a leak-free, secure installation.

• Manufacturer Part Number: YSPBLT-086
• Fits Ford 10.5" Full Float rear differentials
• Thread Pitch: M12-1.75
• Precision-machined for a direct factory replacement
• High-strength construction to maintain clamping force on the axle flange

Fits select 1953-2002 Chevrolet, Dodge, Ford, GMC, International, and Volvo vehicles with Dana 30, Dana 44, or Chrysler 8.75-inch differentials (5.9L).

This Yukon Gear & Axle Power Lok case bolt is an essential component for differential rebuilds or carrier maintenance. Engineered specifically for use with Power Lok limited-slip carriers, this bolt features a left-hand thread pattern to ensure a secure, vibration-resistant hold within the carrier assembly. Replacing worn or stretched hardware with Yukon’s high-strength small parts helps prevent carrier separation and maintain the structural integrity of your differential under load.

• Manufacturer Part Number: YSPBLT-052
• Differential Fitment: Dana Spicer 30, Dana Spicer 44, Chrysler 8.75 in., and 1955-1964 GM Passenger Car
• Thread Orientation: Left Hand (LH) Thread
• Application: Power Lok Case Bolt
• Engine Compatibility: 5.9L

Yukon Gear small parts are designed to meet or exceed OE specifications, providing reliable service for everything from daily driving to heavy-duty towing. Always verify torque specifications during installation to ensure proper carrier assembly.

This Yukon Gear & Axle ring gear bolt is engineered for select 1979-2017 Cadillac, Chevrolet, GMC, and Dodge vehicles equipped with GM 9.2-inch or 9.5-inch differentials. During any gear ratio swap or differential rebuild, replacing your ring gear hardware is essential to ensure the ring gear remains securely fastened to the carrier under high torque loads.

Yukon Gear small parts are manufactured to meet or exceed factory tolerances, providing the reliability needed for heavy-duty drivetrain applications. This specific bolt features a precision-machined 12mm x 1.5 thread pitch to ensure a perfect fit in compatible axle assemblies.

• Fits GM 9.2" and 9.5" ring gear applications
• Thread Size: 12mm x 1.5
• High-strength construction for drivetrain durability
• Essential for gear installation and differential maintenance
• Manufacturer Part Number: YSPBLT-017

Fits select 1960-2011 Chrysler, Dodge, Plymouth, and Ram vehicles (5.9L).

Ensure a secure and reliable ring gear installation with this Yukon Gear & Axle high-strength replacement bolt. Engineered to withstand the rotational forces and torque loads within the differential, this 3/8"-24 fine-thread bolt is a critical component for any ring and pinion service or gear ratio change. Replacing ring gear bolts during a rebuild prevents catastrophic failure caused by reused, stretched, or fatigued factory hardware.

This bolt is specifically designed for Chrysler 7.25-inch, 8.0-inch IFS, 8.25-inch, and 8.75-inch differentials, as well as GM 7.2-inch IFS front applications. It features a precise 0.866-inch length to ensure proper thread engagement without bottoming out in the housing.

• Manufacturer Part Number: YSPBLT-005
• Thread Pitch: 3/8" x 24
• Overall Length: 0.866"
• Compatible Differentials: Chrysler 7.25", 8.0" IFS, 8.25", 8.75" & GM 7.2" IFS Front
• High-strength steel construction for maximum clamping force

Fits select 1988-2010 Chevrolet and GMC K-Series, Silverado, Sierra, Suburban, and Avalanche models with the GM 9.25-inch Independent Front Suspension (IFS) differential.

The Yukon Gear Master Overhaul Kit (MPN YK GM9.25IFS-A) provides all the specialized components required for a professional differential rebuild or gear ratio change. This kit is centered around premium Timken bearings and races, ensuring the tight tolerances and long-term durability required for heavy-duty truck and SUV applications. Yukon conducts extensive research to ensure every shim, seal, and hardware piece is application-specific, eliminating the need for mid-job parts runs.

• Premium Timken bearings and races for carrier and pinion
• Pinion seal and axle seals
• Complete shim kit for precise gear pattern adjustment
• New ring gear bolts and pinion nut
• Crush sleeve and thread locker
• Marking compound with application brush
• High-quality silicone sealant

Fits select 2007-2018 Cadillac Escalade, Chevrolet Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, and Yukon models with the GM 8.25" Independent Front Suspension (IFS) differential.

The Yukon Gear Master Overhaul Kit is a comprehensive solution designed to provide every essential component for a complete differential rebuild. Engineered for precision and longevity, this kit eliminates guesswork by including high-quality wear items required to restore factory-spec performance and reliability to your front axle assembly.

• Utilizes Timken bearings and races for superior strength and extended service life.
• Includes high-quality seals and small parts for a leak-free, professional installation.
• Complete package includes side bearings and seals to ensure a thorough overhaul.
• Extensively researched components tailored specifically for the GM 8.25-inch IFS application.
• Manufacturer Part Number: YK GM8.25IFS-C

Yukon Master Overhaul Kits are built to the highest standards, offering a tailor-made fitment that ensures accuracy during the installation process for both daily drivers and heavy-duty applications.