Fits select 1993-1994 Ford F-150 and Ford Bronco with Dana Spicer 44 IFS.

Yukon Gear & Axle replacement front spindles are engineered to restore the structural integrity of your Dana 44 Independent Front Suspension (IFS). These spindles are manufactured to extremely tight tolerances to ensure proper bearing seating and wheel hub alignment. To provide superior durability compared to standard equipment, Yukon utilizes a deeper heat-treatment process specifically at the bearing journals. This increased surface hardness reduces wear and prevents the journal scoring that often leads to premature bearing failure in heavy-duty or off-road applications.

• Direct replacement for Dana Spicer 44 IFS front axles
• Deeper heat treatment at bearing journals for maximum strength and service life
• Precision-machined to ensure exact fitment and proper tolerances
• Engineered for non-ABS applications
• Manufacturer Part Number: YP SP707373

Fits 1984-1993 Dodge W100, W150, and W250 4WD trucks equipped with Dana Spicer 44 front axles.

Yukon Gear & Axle front spindles are engineered to replace worn or damaged OE units with a focus on long-term reliability. These spindles are manufactured to exacting tolerances and feature a deeper heat-treatment process at the bearing journals compared to standard factory components. This additional hardening provides greater strength and fatigue resistance, ensuring a stable and durable mounting surface for your wheel bearings even under heavy loads or off-road stress.

• Direct replacement for Dana Spicer 44 front axle spindles
• Deeper heat treatment at bearing journals for superior strength and wear resistance
• Manufactured to tighter tolerances than original equipment for precise bearing fitment
• Enhanced durability for towing, hauling, and off-road applications
• Manufacturer Part Number: YP SP706570

Fits select 1979-1986 Jeep CJ5 and CJ7 models.

This Yukon Gear & Axle front spindle is a heavy-duty replacement for Dana 30 front axles featuring a 6-bolt mounting pattern. Engineered to exceed factory specifications, these spindles are manufactured to tight tolerances to ensure precise bearing fitment and restore steering integrity on the trail or the street.

• Enhanced Durability: Features a deeper heat treatment at the bearing journals compared to OEM components for increased strength and wear resistance.
• Precision Machining: Built to exacting tolerances to ensure a direct-fit installation and proper wheel bearing seating.
• Technical Specifications: Designed for Dana 30 front axle applications using the standard 6-hole spindle mounting configuration.
• Part Number: YP SP706537.

Whether you are performing a front-end rebuild or replacing a damaged factory unit, this Yukon spindle provides the structural reliability needed for off-road and daily driving applications.

Fits select 1973-1988 Chevrolet and GMC K10, K20, K5 Blazer, and V-series 1/2 and 3/4-ton trucks with Dana 44 or GM 8.5-inch front axles.

This Yukon Gear & Axle front spindle is engineered as a high-strength replacement for Dana 44 and GM 8.5-inch front axle assemblies. Designed to exceed original equipment standards, these spindles undergo a deeper induction heat treatment process at the bearing journals to provide superior wear resistance and structural integrity under heavy loads or off-road use.

Each spindle is precision-machined to exacting tolerances, ensuring a direct fit that maintains proper wheel bearing alignment and hub stability. This unit features the standard 6-bolt mounting pattern and is compatible with 2.00-inch and 1.625-inch bearing journals, restoring your front end's reliability and performance.

• Direct replacement for Dana 44 and GM 8.5" front spindles
• Enhanced heat treatment at bearing journals for increased durability
• Precision-machined for exact fitment and longevity
• Mounting Pattern: 6-bolt
• Inner Bearing Journal: 2.000 in.
• Outer Bearing Journal: 1.625 in.
• Manufacturer Part Number: YP SP706529

The Yukon Gear Mini Spool offers a cost-effective traction solution for 1986-1995 Suzuki Samurai owners seeking full-time lockup for off-road use. This unit is engineered to install directly into a standard open carrier case in place of the factory spider gears, delivering 100% power to both wheels at all times.

By replacing the OE spider gears, this mini spool eliminates the differentiation between wheels, ensuring consistent torque delivery across rugged terrain. Because it provides permanent lockup, this unit is not recommended for street-driven vehicles where tire scrub and drivetrain binding would occur during turns. For extreme applications involving oversized tires or high-horsepower engines, a full spool may be preferred for maximum durability.

• Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JS, JX, JX SE)
• Provides 100% traction to both wheels at all times
• Installs into a standard open carrier case
• Direct replacement for factory spider gears
• Designed for dedicated off-road vehicles
• Manufacturer Part Number: YP MINSSSAM-26

Fits select 1970-2003 Buick, Cadillac, Chevrolet, and GMC vehicles with GM 8.5" differentials and 30-spline axles.

The Yukon Gear Mini Spool provides a cost-effective traction solution for competition vehicles requiring full-time lockup. This unit is designed to install directly into a standard open carrier by replacing the internal spider gears, effectively locking the axles together to deliver 100% power to both tires at all times. It is a popular choice for dedicated off-road and drag racing builds where consistent power delivery is the primary goal.

• Delivers constant 100% traction to both wheels
• Installs directly into a standard open carrier case
• Replaces internal spider gears for mechanical lockup
• Designed for 30-spline axle applications
• Manufacturer Part Number: YP MINSGM8.5-30

Note: Mini spools are not recommended for street-driven vehicles due to tire scrub and adverse handling on pavement. For high-horsepower builds or vehicles equipped with oversized tires, a full spool is recommended for maximum strength.

Fits select 1967-2015 Chevrolet and GMC C/K 2500 and 3500 series trucks, vans, and SUVs with the GM 10.5" 14-bolt rear differential.

The Yukon Gear Mini Spool offers a cost-effective solution for off-road enthusiasts and racers seeking maximum traction. Designed to replace the factory spider gears within a standard open carrier case, this unit mechanically locks the axle shafts together to deliver 100% power to both wheels simultaneously. This ensures consistent drive in low-traction environments like mud, sand, or drag strips.

• Provides 100% traction to both wheels at all times
• Installs directly into a standard open carrier case
• Replaces factory spider gears for full-time mechanical lockup
• Optimized for GM 10.5" 14-bolt truck differentials
• Ideal for off-road use and drag racing applications
• Manufacturer Part Number: YP MINSGM14T-30

Note: Mini spools are not recommended for street-driven vehicles. For vehicles equipped with oversized tires or high-horsepower engines, a full spool is recommended for additional strength.

Fits select 1975-1993 Chevrolet, Dodge, Ford, and GMC models equipped with a Dana 60 front axle. This Yukon Gear upper king-pin bushing spring retainer plate is a direct-replacement component designed to restore the integrity of your king-pin assembly.

As an essential part of the knuckle's upper pivot point, this plate secures the spring against the king-pin bushing to maintain proper tension and alignment. Over time, original retainers can suffer from corrosion or fatigue; this Yukon Gear replacement ensures a precise fit and reliable service life in heavy-duty or off-road applications. It serves as a direct alternative to Spicer part number 620180.

• Fits Dana Spicer 60 front axles
• Direct replacement for Spicer 620180
• Ensures proper seating for the upper king-pin spring
• Manufacturer Part Number: YP KP-008

Restore the steering precision and axle stability of your Dana 60 front end with the Yukon Gear YP KP-001 King Pin Rebuild Kit. Designed to rebuild one side of the axle, this kit replaces worn factory components that lead to steering play and vibration, ensuring your heavy-duty axle maintains proper alignment under load.

This kit is a direct replacement for Dana Spicer part number 706395-R and includes all necessary hardware for a complete installation. Every component is manufactured to meet or exceed OE tolerances for durability in off-road and heavy-duty applications.

• Fits select 1975-1993 Chevrolet, Dodge, Ford, and GMC vehicles with Dana 60 front axles
• Complete kit to rebuild one side of the axle
• Replaces Dana Spicer part number 706395-R
• Restores factory steering geometry and stability

Kit Includes: King pin, bushing, seals, bearings, cap, gasket, spring, and mounting hardware.

Fits select 1975-1990 Toyota Land Cruiser, 1979-1986 Pickup, and 1984-1986 4Runner.

The Yukon Gear YP KNCLKIT-TOY Knuckle Kit is a comprehensive service solution designed to rebuild both the driver and passenger sides of your Toyota front axle. This kit is essential for addressing steering play and oil leaks caused by worn knuckle components. By replacing factory wear items with high-specification hardware, you restore original steering precision and ensure the front axle assembly remains sealed against contaminants.

• Manufacturer Part Number: YP KNCLKIT-TOY
• Services both sides (left and right) of the front axle
• Includes high-quality Nachi bearings for superior load-carrying and durability
• Complete set of wipers and seals to prevent lubricant loss and debris ingress
• Components manufactured to precise tolerances for reliable fitment

Fits select 1953-2002 Chevrolet, Dodge, Ford, and GMC models equipped with a Dana 44 differential.

The Yukon Gear & Axle Full Spool (YP FSD44-4-30UP) is engineered for dedicated off-road and drag racing applications where maximum traction is required. By replacing the entire differential carrier assembly, this spool provides a permanent 100% lockup, ensuring power is delivered to both wheels at all times. This eliminates the unpredictability of limited-slip or automatic lockers in high-torque environments.

• Manufactured from high-strength 8620 steel for maximum durability
• Heat-treated for increased surface hardness and core strength
• Fits Dana Spicer 44 housings with 30-spline axles
• Compatible with 3.92 and numerically higher gear ratios (3.92+)
• Replaces factory carrier assembly for straightforward installation
• MPN: YP FSD44-4-30UP

Note: This part provides 100% traction to both wheels at all times and is not recommended for street-driven vehicles.

Fits select 1979-2014 Chevrolet and GMC C20, K20, Silverado/Sierra 1500 and 2500, Suburban, and Express/Savana vans with the GM 9.5-inch differential.

This Yukon Gear YP C5-GM9.5 steel differential cover serves as a reliable replacement for your factory unit. Designed specifically for the GM 9.5" 14-bolt semi-floating axle, this stamped steel cover provides structural protection for your differential components. The housing is threaded for a fill plug to facilitate gear oil service, though the plug itself is not included with the cover.

• Material: Stamped Steel
• Differential Application: GM 9.5-inch 14-Bolt
• Feature: Threaded for fill plug
• Note: Fill plug not included
• Manufacturer Part Number: YP C5-GM9.5

Fits select 1999-2020 Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, and Saab vehicles with GM 8.2-inch or 8.6-inch rear differentials.

Protect your drivetrain and ensure a leak-free seal with the Yukon Gear Rear Differential Cover Kit. This steel cover is engineered as a direct replacement for worn or damaged factory units, providing the structural integrity needed for reliable axle performance. The kit is designed using state-of-the-art software to guarantee precise fitment and tight tolerances against the differential housing.

This kit is a complete service solution, including a new gasket and mounting hardware to simplify your next gear oil change or differential service. Note: This cover measures 9.75 inches wide center-to-center between the side bolt holes. It is not compatible with models such as the Trailblazer or Envoy equipped with the 10.25-inch wide cover.

• Replaces factory GM 8.2" and 8.6" rear differential covers
• Durable steel construction for long-term reliability
• Precise 9.75" center-to-center width between side bolt holes
• Includes differential cover, gasket, fill plug, and cover bolts
• Manufacturer Part Number: YP C5-GM8.5-KIT

Protect your drivetrain with the Yukon Gear Hardcore heavy-duty steel differential cover, engineered to withstand the rigors of off-road trails, the track, and daily street use. Fits select 2000-2012 Buick, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, and Saab vehicles equipped with the GM 8.0-inch rear axle.

This steel cover provides a significant upgrade over factory stamped-steel versions, offering increased structural rigidity to prevent housing flex and ensure a reliable, leak-free seal in rugged terrain. Whether you are navigating rock crawls or towing heavy loads, this cover shields your internal ring and pinion gears from impact damage and debris.

• Fits GM 8.0-inch rear differentials
• Heavy-duty steel construction for maximum impact resistance
• Provides a reliable, leak-free seal under extreme conditions
• Designed for long-term durability on and off-road
• Manufacturer Part Number: YP C5-GM8.0