Fits 2007-2017 Jeep Wrangler and Wrangler Unlimited JK (Rubicon, Sahara, Sport, X).

When lifting a Jeep Wrangler JK between 3 and 4 inches, the front caster angle changes, often resulting in vague steering and a tendency for the vehicle to wander at highway speeds. Zone Offroad front alignment cam locks provide a precise, cost-effective solution to restore factory-spec caster and improve overall driveability without the need for expensive aftermarket adjustable lower control arms.

• Corrects front caster to reduce wandering on vehicles with 3-4 inch lifts
• Replaces the need for aftermarket lower control arms for alignment correction
• Complete kit includes inner and outer cam locks for the front axle
• Simple bolt-on installation can be completed in approximately one hour
• Once properly installed, no further adjustments are required
• Manufacturer Part Number: ZONJ5312

Fits 2007-2018 Jeep Wrangler and Wrangler JK models with 3-inch to 4.5-inch suspension lifts.

Correct your sway bar operating angle and restore on-road handling with these heavy-duty front sway bar links from Zone Offroad. Lifting your Jeep often leaves the factory sway bar at an aggressive angle, which can compromise stability and limit articulation. These extended links are engineered to bring the sway bar back into its optimal geometry for improved performance both on and off the trail.

Constructed from 5/8-inch solid steel, these links are built to withstand the stresses of off-road use. They feature black urethane eyelet bushings for superior durability over factory rubber, and the clear zinc plating provides a long-lasting, corrosion-resistant finish. This complete kit includes all necessary sleeves and mounting hardware for a straightforward installation.

• Heavy-duty 5/8-inch solid steel center section for maximum strength
• Black urethane bushings improve response and resist environmental degradation
• Clear zinc plating provides excellent corrosion resistance
• Optimized for 3-inch to 4.5-inch lift heights
• Includes all required mounting hardware and steel sleeves
• Manufacturer Part Number: ZONJ5301

Fits select 1984-2017 Jeep Cherokee, Grand Cherokee, and Wrangler models.

Secure your suspension during extreme off-road maneuvers with the Zone Offroad Coil Spring Retainer. At full articulation, especially on Jeeps equipped with long-travel shocks and aftermarket adjustable control arms, coil springs have the potential to unseat and displace. This bolt-in retainer is designed to eliminate the risk of losing a spring on the trail, keeping your suspension properly seated during high-flex scenarios.

• Manufactured from heavy-duty 1/8-inch steel for trail durability
• Finished in a black e-coating for superior corrosion resistance and long-term appearance
• Includes a 5/16-inch self-tapping bolt for a secure mounting point
• Prevents coil spring unseating common with increased suspension travel
• Manufacturer Part Number: ZONJ5002

Fits select 2021-2025 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and SSV.

This Zone Offroad 2-inch leveling kit (MPN ZONF1205) utilizes a unique combination of top-mounted strut spacers and preload spacers to achieve lift without overextending the suspension during droop travel. This dual-spacer design maintains factory ride quality and handling characteristics while providing the necessary clearance for larger wheel and tire combinations.

• Specifically engineered for 2021-2025 Ford F-150 models (fits EcoBoost and Diesel)
• Combination of top-mounted strut spacers and preload spacers for proper geometry
• Retains factory ride quality and steering feel
• Bolt-on installation allows the vehicle to be returned to stock if necessary
• Provides clearance for larger aftermarket tires
• Includes Factory Protection Plus Program

Fitment and Installation Notes: Does not fit Tremor models or trucks equipped with Continuous Controlled Damping (CCD). Compatibility with Ford BlueCruise has not been tested. A strut compressor is required for installation. For trucks with a 2-piece driveshaft, Zone recommends completing Ford Safety Recall 21S25 prior to installing this kit.

Fits 2022 Ford Maverick AWD Lariat, XL, and XLT models.

Level the stance of your truck with the Zone Offroad 1-inch front leveling kit. Designed specifically for the AWD Ford Maverick, this kit uses top-mount strut spacers to provide 1 inch of lift, eliminating the factory rake and creating clearance for up to 245/65R17 or 245/60R18 tires. These spacers are engineered to maintain factory ride quality and upper strut bushing function while managing CV angles for long-term reliability.

Each spacer is manufactured from high-strength American steel, laser-cut for a precise fit, and finished in a durable black textured powder coat. The bolt-on design allows for a clean installation that does not require disassembly of the factory strut assembly.

• Provides 1-inch of front lift to level the vehicle stance
• High-strength laser-cut American steel construction
• Clears up to 245/65R17 or 245/60R18 tires
• No-disassembly installation maintains factory strut integrity
• Durable black textured powder coat finish
• Preserves factory ride quality and bushing geometry
• Manufacturer Part Number: ZONF1104

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks.

Struggling to clear aggressive wheel and tire combinations on your GM 1500 truck? Even with a lift kit installed, many oversized tires will rub the backside of the front inner fender. Zone Offroad fender trim plates (ZONC5652) solve this common fitment issue by providing an additional 5/8-inch of tire-to-inner fender clearance.

These plates are designed to maintain a clean, professional appearance without the need for unsightly zip ties or self-tapping screws. They are compatible with all brands and styles of lift kits, ensuring you can run high-offset or wider wheels without compromise during suspension compression.

• Provides 5/8-inch of additional clearance for larger tires and aggressive offsets
• Retains factory appearance of the inner fender liner
• Eliminates the need for makeshift mounting solutions
• Compatible with all suspension lift kit brands
• Manufacturer Part Number: ZONC5652

Fits 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 (All Trims).

Correct your suspension geometry and increase durability on your leveled or lifted truck with Zone Offroad Adventure Series upper control arms. These arms are engineered to directly replace factory components, providing a significantly increased range of travel while correcting ball joint angles that are often compromised after lifting. Each arm is constructed from high-strength cast ductile iron with CNC-machined ball joint and bushing mounts for precision fitment and maximum structural integrity.

• Cast ductile iron construction provides superior strength over factory stamped steel or aluminum arms
• CNC-machined ball joint cups positioned specifically for use with leveling and lift kits
• High-quality greaseable ball joints include protective caps to prevent contamination from dirt and debris
• OE-style rubber bushings ensure a quiet, maintenance-free ride with factory-level vibration damping
• Fully assembled and ready for a direct-bolt-on installation
• Manufacturer Part Number: ZONC2321

Designed for the 2018 Jeep Wrangler JL 4-Door, this Zone Offroad 3-inch suspension lift kit (ZONJ1320) provides the necessary clearance for larger wheel and tire combinations while maintaining predictable handling on and off the trail. This system is engineered to level the vehicle's stance and improve ground clearance without compromising factory ride quality.

By utilizing heavy-duty components, this lift kit replaces or extends critical suspension points to accommodate 3 inches of lift. This height increase allows for significantly improved approach, departure, and breakover angles, protecting your undercarriage from trail obstacles. Each component is finished for durability and designed to bolt directly to factory mounting locations.

• Specifically fits 2018 Jeep Wrangler JL 4-Door models.
• Provides 3 inches of suspension lift for increased ground clearance.
• Maintains factory-like ride quality and handling characteristics.
• Includes all necessary installation hardware and components.
• Manufacturer Part Number: ZONJ1320

Fits 2005-2020 Ford Super Duty F-250 and F-350 trucks.

The Zone Offroad ZONF1601 Radius Arm is a heavy-duty suspension component designed to restore or improve front-end geometry on your Super Duty. Constructed from thick, boxed steel, this arm provides significantly more strength and rigidity than factory stamped-steel arms, making it an essential upgrade for trucks seeing heavy towing or off-road use. It maintains proper axle alignment and caster settings to ensure consistent handling and tire wear.

• Fabricated from heavy-duty boxed steel for superior structural integrity
• Designed as a direct bolt-on replacement for the factory radius arm
• Includes pre-installed bushings for a quiet, maintenance-free operation
• Durable black powder-coated finish provides excellent corrosion resistance
• Maintains proper front-end caster and axle positioning
• Manufacturer Part Number: ZONF1601

Note: This part number includes one (1) radius arm.

Fits 2005-2020 Ford F-250 and F-350 Super Duty models (Diesel).

Designed specifically for the heavy front-end requirements of diesel-powered Super Duty trucks, this Zone Offroad 4-inch front lift coil spring provides a level stance and improved ground clearance. Engineered to maintain factory ride quality, this coil spring allows for the fitment of larger wheel and tire combinations while ensuring predictable handling under load. This is a direct replacement for the factory front coil and is sold as a single unit.

• Specifically tuned spring rate for 2005-2020 Ford F-250/F-350 Diesel models
• Provides 4 inches of front lift height
• Maintains OE ride comfort and suspension geometry
• Finished in a durable black powder coat
• Sold individually (Single Coil)
• Manufacturer Part Number: ZONF1413

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 4WD models with factory cast steel control arms.

This Zone Offroad suspension system delivers a 6.5-inch front lift and a 4.5-inch rear lift, providing the clearance needed for up to 35-inch tires while maintaining a leveled profile. Engineered for durability and precise steering response, the kit features heavy-duty, CNC-machined replacement steering knuckles designed specifically for trucks equipped with OE cast steel suspension components.

• Replacement cast steel steering knuckles maintain factory geometry and ESC compatibility
• Laser-cut front and rear high-clearance crossmembers for maximum ground clearance
• Heavy-duty differential drop brackets and skid plate protect 4WD components
• Rear 4.5-inch lift blocks with integrated bump stop extensions
• Accommodates up to 35x12.50 tires on 20-inch wheels
• Manufacturer Part Number: ZONC2650

Protect your shock absorbers from premature seal failure and shaft pitting with the Zone Offroad ZONU3100 Black Shock Boot. These all-weather boots are manufactured from durable, convoluted polyurethane, allowing them to cycle smoothly as the suspension extends and collapses without binding or tearing. This design effectively shields the shock shaft and seals from mud, salt, and abrasive debris encountered during off-road or daily driving.

Designed as a universal solution for most aftermarket shocks, they install over the standard upper mount and secure firmly to the shock body using the included heavy-duty zip tie. These boots are engineered to fit shock bodies with a diameter up to 2-3/8 inches (60mm), ensuring a snug fit that stays in place throughout the full range of suspension travel.

• Material: High-quality convoluted polyurethane
• Color/Finish: Black
• Maximum Shock Body Diameter: 2-3/8" (60mm)
• Includes: One (1) shock boot and one (1) heavy-duty zip tie
• Manufacturer Part Number: ZONU3100

Lift the rear of your leaf spring-equipped truck while maintaining proper driveline geometry with these Zone Offroad 5-inch tapered lift blocks. Unlike flat blocks that can lead to driveline vibration, these blocks feature a precision taper designed to improve the pinion angle after lifting. Each block is CNC-machined to ensure exact pin placement for a secure, centered fit between the axle and leaf spring pack.

Constructed from heavy-duty cast iron for maximum compression strength, these blocks are cast in the USA and finished in a durable black e-coating to resist corrosion in harsh underbody environments. The blocks utilize a standard 9/16-inch male pin and a 5/8-inch female hole for compatibility with common truck hardware.

• Lift Height: 5 inches
• Design: Tapered for pinion angle correction
• Material: Heavy-duty cast iron
• Finish: Black e-coating
• Pin Dimensions: 9/16-inch male pin with 5/8-inch female receiver
• Manufacturing: CNC-machined, Cast in the USA
• Package Contents: Sold as a pair
• Manufacturer Part Number: ZONU3050

Gain a reliable 3-inch rear lift for leaf spring-equipped trucks with Zone Offroad ZONU3030 tapered lift blocks. These heavy-duty blocks are manufactured from high-grade cast iron for maximum crush resistance and feature a tapered profile designed specifically to optimize the pinion angle, helping to eliminate driveline vibrations common in lifted applications.

Each block is CNC-machined in the USA to ensure precise pin placement and secure fitment. The units feature a standard 9/16-inch male pin with a 5/8-inch female hole for proper alignment on the axle pad. Finished in a durable black e-coating, these blocks are engineered to resist corrosion and withstand harsh underbody conditions.

• Lift Height: 3 Inches
• Material: Cast Iron construction
• Design: Tapered for pinion angle correction
• Pin Specification: 9/16-inch male pin with 5/8-inch female hole
• Finish: Black e-coating and powder coat
• Manufacturing: CNC-machined, Cast in the USA
• Quantity: Sold as a pair
• Manufacturer Part Number: ZONU3030

Fits select 1975-2011 Ford F-150, F-250/F-350 Super Duty, Bronco, and Excursion, and 2007-2014 Toyota Tundra.

Achieve a 2-inch rear lift on your leaf spring truck with this pair of Zone Offroad tapered lift blocks. These blocks are specifically engineered to lift the rear suspension while correcting the pinion angle, a common requirement when increasing ride height to prevent driveline vibration. Each block is cast in the USA and CNC-machined to ensure precise pin placement for a secure interface between the axle pad and leaf spring.

Constructed from heavy-duty cast iron and finished in a durable black e-coating, these blocks provide the structural integrity required for hauling, towing, and off-road use while resisting corrosion in harsh environments.

• Lift Height: 2 inches
• Design: Tapered for pinion angle correction
• Material: Heavy-duty cast iron
• Finish: Black e-coating / powder coat
• Pin Specifications: 5/8 inch male pins with 11/16 inch female holes
• Manufacturing: CNC-machined pin placement; Cast in the USA
• Quantity: Sold as a pair
• Manufacturer Part Number: ZONU3021

Elevate the rear ride height of your leaf spring-equipped truck with this pair of Zone Offroad 2-inch tapered lift blocks. These blocks are engineered to provide a reliable lift solution while specifically addressing driveline geometry. The integrated taper helps optimize the pinion angle, which is essential for reducing driveline vibration after a suspension lift is installed.

Constructed from heavy-duty cast iron and cast in the USA, these blocks (MPN: ZONU3020) feature a durable black e-coating for long-term corrosion resistance. Each block is CNC-machined to ensure precise pin placement for a secure, centered fit between the axle perch and the leaf spring pack.

• Lift Height: 2 inches
• Design: Tapered to improve/correct pinion angle
• Pin Specifications: 9/16-inch male pin with 5/8-inch female hole
• Material: High-strength cast iron
• Finish: Corrosion-resistant black e-coating
• Manufacturing: CNC-machined for proper pin placement; Cast in the USA
• Quantity: Sold as a pair

Fits 1987-1995 Jeep Wrangler YJ models equipped with manual transmissions.

This Zone Offroad 3" Body Lift Kit provides a reliable way to increase tire clearance on your YJ without altering factory suspension geometry or spring rates. The system is engineered around high-strength, crush-proof body blocks capable of supporting up to 60,000 lbs, ensuring your vehicle's body remains securely mounted even during rigorous off-road use.

To ensure full functionality after the lift, this kit includes essential relocation hardware. It features transfer case and transmission shifter linkage relocation to prevent binding, steering correction to maintain factory feel, and radiator relocation brackets to preserve proper airflow through the cooling system. Every kit comes complete with Grade 5 mounting hardware and a fuel filler hose extension for a thorough installation.

• 3-inch lift height for additional wheel well clearance
• Crush-proof body blocks rated for 60,000 lbs
• Grade 5 body mount bolts and all necessary hardware
• Radiator relocation brackets to maintain engine cooling efficiency
• Steering correction components for factory functionality
• Shifter linkage relocation for manual transmission and transfer case
• Fuel filler hose extension included
• Manufacturer Part Number: ZONJ9320

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited models (2-door and 4-door).

This Zone Offroad 2-inch body lift (MPN: ZONJ9210) provides an economical way to gain additional tire clearance without affecting your Jeep's ride quality or suspension geometry. Unlike basic kits, this system includes essential components to maintain proper vehicle function at the new height, including steering correction and radiator relocation to ensure consistent airflow and cooling performance.

• Crushproof body lift blocks and high-strength Grade 5 body mount hardware
• Steering correction component maintains factory steering functionality and angles
• Transfer case linkage relocation bracket prevents shifter binding
• Radiator relocation brackets ensure proper fan shroud alignment and airflow
• Fuel filler hose extension included for a complete installation

Important Fitment Notes: This kit is not recommended for 2011-2018 models equipped with manual transmissions and the updated interior, as extensive shifter and floorboard modifications are required. If utilizing bumper relocation brackets, please note they are incompatible with Mopar rear bumpers. Manual transmission models may require shifter boot and floorboard modification to ensure full gear engagement.

Fits 1984-2001 Jeep Cherokee XJ models.

This replacement bushing kit is engineered specifically for Jeep Cherokee XJs equipped with Zone Offroad rear leaf springs. These polyurethane bushings utilize a specific durometer to effectively isolate road noise and vibrations while improving suspension stability over standard rubber alternatives. Each kit is built for long-term durability and includes the necessary hardware to complete a pair of rear leaf springs.

• Specific durometer polyurethane designed to absorb road noise and vibration
• Fluted internal design ensures even grease distribution for quiet operation
• UV stabilizer added to the material for improved environmental resistance
• Includes 4 Large Eye Bushings and 4 Small Eye Bushings
• Includes 4 steel sleeves to complete the installation
• Manufacturer Part Number: ZONJ7008

Fits select 1984-2006 Jeep Cherokee (XJ), Comanche (MJ), Grand Cherokee (ZJ), and Wrangler (TJ) models equipped with Zone Offroad lower control arms.

Restore the handling and ride quality of your suspension with the Zone Offroad ZONJ7001 Lower Control Arm Bushing Kit. This kit is specifically designed to replace worn bushings in Zone Offroad Jeep lower control arms, providing enough components to service two arms. Whether you are running a TJ/ZJ setup (front or rear) or an XJ/MJ setup (front only), these bushings provide the necessary dampening to isolate road noise while maintaining firm control of axle geometry.

Constructed from high-grade black urethane, these bushings feature an integrated UV stabilizer to prevent drying and cracking. The internal bores are fluted to ensure even grease distribution across the sleeve surface, preventing the squeaks often associated with aftermarket poly bushings. Each set is tuned to a specific durometer that balances durability with vibration isolation for a smoother driving experience on and off-road.

• Replacement for Zone Offroad lower control arms
• High-durability urethane construction with UV stabilizer
• Fluted design for consistent lubrication and quiet operation
• 8 Control arm bushing halves (services 2 arms)
• 4 Replacement steel sleeves included
• Manufacturer Part Number: ZONJ7001

Fits 1999-2004 Jeep Grand Cherokee WJ (Laredo, Limited, Overland, Special Edition, and Sport).

Correct the front sway bar operating angle on your lifted WJ with these Zone Offroad heavy-duty sway bar links. When installing a 2-3 inch lift kit, the factory links become too short, often leading to poor handling and potential binding. These 9-inch links restore the proper geometry to ensure the sway bar functions correctly for improved on-road stability and predictable cornering.

Constructed from 5/8-inch solid steel, these links are built to withstand the stresses of both daily driving and off-road use. They feature a durable zinc-plated finish for long-term corrosion resistance and utilize high-performance black urethane bushings to minimize deflection compared to soft factory rubber.

• 5/8-inch solid steel center section for maximum rigidity
• Designed for vehicles with 2-3 inches of suspension lift
• Zinc plated for superior durability and appearance
• Premium black urethane bushings and sleeves included
• Direct bolt-on installation with provided hardware
• Overall Length: 9 inches
• Made in the USA
• Manufacturer Part Number: ZONJ5202

Fits 1984-2001 Jeep Cherokee XJ.

Eliminate driveline vibrations and correct pinion angles on your lifted Cherokee with the Zone Offroad 1-inch transfer case drop kit. Increasing suspension height on an XJ often results in steep driveshaft angles that cause shuddering during acceleration. This system repositions the factory crossmember lower to restore geometry and reduce stress on U-joints.

Designed specifically for vehicles equipped with 3-inch to 5-inch lift kits, this bolt-on solution includes high-strength spacers and the necessary extended hardware for a precise fit. The kit (ZONJ5006) comes complete with thread locker to ensure all fasteners remain secure under trail conditions.

• Reduces driveline angles to eliminate unwanted vibration
• Engineered for use with 3" to 5" suspension lifts
• Includes spacers, extended Grade 8 hardware, and thread locker
• Simple bolt-on installation using factory mounting points
• Manufacturer Part Number: ZONJ5006

Fits 1999-2003 Jeep Grand Cherokee Laredo (WJ).

The Zone Offroad 4-inch suspension system is engineered to increase ground clearance and improve the off-road geometry of the WJ platform. This system provides the lift necessary to accommodate larger wheel and tire combinations while maintaining predictable handling characteristics. Built to replace or upgrade factory suspension components, this kit addresses the specific articulation and clearance needs of the Grand Cherokee Laredo.

• Precision-engineered 4-inch lift height for increased trail clearance
• Designed specifically for the Jeep WJ Grand Cherokee chassis
• Enhances approach, departure, and breakover angles
• Manufacturer Part Number: ZONJ17N

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Enhance the stance and off-road capability of your Jeep Wrangler YJ with this pair of Zone Offroad 4-inch lift leaf springs. These springs are engineered for durability and reliable ride height, featuring a heavy-duty 5-leaf pack design. To ensure maximum safety during articulation, these springs utilize military wrapped ends, providing a secondary layer of protection to keep the main leaf secured to the chassis mounts.

• Manufacturer Part Number: ZONJ0400
• Construction: 5-leaf spring pack with military wrapped ends
• Sold as a pair (2 leaf springs)
• Lift Height: 4 inches

Note on Installation: Bushings (Part # J7000) are not included and must be added to your order separately. If you are installing these 4-inch springs on a vehicle without existing driveline modifications (such as an SYE/CV driveshaft or motor mount lift), it is necessary to install 4-degree rear shims (Part # U3001), a center pin kit (Part # U3010), and a transfer case drop kit (Part # J5003) to maintain proper driveline angles and prevent vibration.

Fits 1984-2001 Jeep Cherokee (XJ) models including Base, Sport, Limited, and SE.

Designed to improve ride quality and suspension performance, this Zone Offroad 3-inch rear leaf spring features a heavy-duty 5-leaf pack construction. By incorporating anti-friction pads and center leaf spacer plates between each leaf, internal friction is significantly reduced. This design allows for smoother cycling and maximized compression travel, which directly translates to increased wheel travel and better off-road articulation.

• 3-inch lift height for rear suspension
• Heavy-duty 5-leaf pack design
• Anti-friction pads and spacer plates included to reduce squeaking and binding
• Maximized compression travel for improved off-road performance
• Manufacturer Part Number: ZONJ0308
• Sold individually; bushings are required and sold separately

Vehicle Fitment:

Fits 1998-2000 Ford Ranger EV, Splash, XL, and XLT models. This Zone Offroad 3-inch body lift kit (ZONF9378) provides the necessary clearance to run larger tire and wheel combinations without altering the factory suspension geometry or compromising ride quality. By lifting the cab and bed 3 inches above the frame, this system maintains original handling characteristics while providing a more aggressive stance.

The kit features glass-reinforced nylon body blocks for maximum strength and durability. To ensure a professional finish, Zone Offroad includes front and rear bumper relocation brackets that maintain factory body lines, along with a steering extension to preserve smooth steering operation. This comprehensive kit comes with all necessary hardware and brackets required for a complete installation.

• Lift Height: 3 Inches
• Body Blocks: High-strength, indestructible glass-reinforced nylon blocks
• Steering: Includes steering extension to maintain factory-consistent handling
• Bumper Alignment: Front and rear bumper relocation brackets included for an OE look
• Hardware: High-grade mounting hardware, fuel filler extension, and bed supports included
• Radiator: Specialized radiator relocation brackets ensure proper cooling system alignment
• Part Number: ZONF9378

Fits 1999-2004 Ford F-250 and F-350 Super Duty trucks.

Maintaining correct steering geometry is critical when installing a suspension lift. This Zone Offroad heavy-duty pitman arm features a 4.5-inch drop designed to reduce drag link angles, bringing them into alignment with the track bar to restore handling characteristics and reduce steering feedback. Unlike cast alternatives, this arm is built from a high-strength forged one-piece design to handle the increased leverage of larger tires and off-road use.

• One-piece forged design for superior strength and durability
• Precision machined bore for a perfect fit on the factory steering box
• 4.5-inch drop corrects drag link geometry on lifted applications
• Finished in a durable black e-coat for long-lasting corrosion resistance
• Designed for straightforward installation to OEM mounting points
• Manufacturer Part Number: ZONF8403

Fits select 2004-2023 Ford F-150, Chevrolet Silverado 2500/3500 HD, and GMC Sierra 2500/3500 HD models equipped with Zone Offroad aftermarket control arms.

Maintain the performance and safety of your suspension system with this genuine Zone Offroad service kit. Specifically engineered to replace worn components in Zone F2300 and F2301 series upper control arms (UCAs), this kit provides a direct-fit solution to restore smooth articulation and eliminate front-end play. The press-in ball joint is designed for high-angle travel, ensuring it handles the increased stresses of leveled or lifted applications without binding.

Each kit includes all necessary hardware for servicing a single control arm. The greaseable design features an integrated zerk fitting, allowing for regular maintenance to purge contaminants and extend the service life of the joint in harsh off-road environments.

• Replacement ball joint for Zone Offroad UCA kits F2300 and F2301
• Heavy-duty press-in style ball joint with high-travel housing
• Greaseable design for simplified maintenance and longevity
• Includes (1) ball joint, (1) snap ring, (1) grease zerk, (1) cotter pin, and (1) dust cap gasket
• Manufacturer Part Number: ZONF8202

Fits select 2005-2020 Ford F-250/F-350 Super Duty and 2013-2018 Ram 2500/3500 trucks equipped with Zone Offroad HD radius arms.

Restore the handling and steering precision of your front suspension with this replacement radius arm bushing kit from Zone Offroad. These durometer-specific polyurethane bushings are designed to replace worn units in Zone Offroad HD radius arms, providing a significant upgrade in durability over standard rubber. The material is engineered to absorb road noise and vibrations while maintaining the stiffness required for predictable handling on and off-road.

Each bushing is fluted to ensure even grease distribution, preventing squeaks and extending service life. The addition of a UV stabilizer prevents the polyurethane from breaking down due to environmental exposure, ensuring long-term performance in harsh undercar conditions.

• Specifically engineered for Zone Offroad HD Radius Arms
• High-grade polyurethane construction for superior wear resistance
• Fluted design for consistent lubrication
• UV stabilizers added for material longevity
• Complete kit services both the driver and passenger side radius arms
• Manufacturer Part Number: ZONF7401

Kit Includes:

• (4) Polyurethane bushing halves
• (2) Replacement steel sleeves

Fits 2005-2016 Ford F-250 and F-350 Super Duty models. This Zone Offroad track bar bushing kit is engineered to replace worn, soft factory rubber bushings that cause steering wander and decreased handling precision. By utilizing high-quality polyurethane, this kit reduces lateral axle movement and restores a tight, responsive steering feel.

• Constructed from high-performance polyurethane for superior durability and wear resistance compared to OE rubber.
• Specifically tuned durometer material effectively absorbs road noise and vibration while maintaining structural integrity under load.
• Formula includes a UV stabilizer to prevent degradation and cracking from environmental exposure.
• Direct replacement for one eye/end of the factory track bar assembly.

Kit Includes: 2 Bushing Halves, 1 Precision-Fit Sleeve.

Manufacturer Part Number: ZONF7101