Fits 2008-2015 Ford F-250 and F-350 Super Duty (4WD/2WD) models including XL, XLT, Lariat, and King Ranch trims.

Restore sagging rear suspension or gain additional lift for towing and hauling with the Zone Offroad Dual Add-A-Leaf kit. Unlike standard single-leaf kits that can create a harsh ride, this dual-leaf system uses two longer, thinner leaves per side. This design provides a more progressive spring rate, maintaining factory-like ride quality while increasing rear ride height and load support.

The ZONF6209 kit is engineered to bolt directly into the factory leaf pack. It includes all necessary hardware to ensure a secure installation, featuring extended center pins to accommodate the additional leaf thickness and alignment clamps to maintain pack integrity under load.

• Manufacturer Part Number: ZONF6209
• Design: Dual add-a-leaf (2 leaves per side)
• Material: High-strength spring steel
• Leaf Profile: Long, thin design for improved flex and ride quality
• Installation: Bolts into factory leaf spring pack
• Included Hardware: (4) Add-a-leafs, (2) extended center pins, and alignment clamps

Fits 1997-2013 Ford F-150 models including XL, XLT, Lariat, King Ranch, FX4, STX, and SVT Raptor.

When lifting a Ford F-150, the increased distance between the transfer case and the rear axle can pull the driveshaft slip yoke too far out of the tail shaft. This Zone Offroad 3/4-inch rear driveshaft spacer is engineered to restore proper engagement, significantly reducing the risk of vibration, premature u-joint wear, or slip yoke failure. This precision-machined component offers a cost-effective alternative to ordering a custom-length driveshaft for lifted applications.

• Constructed from high-strength 6061 T-6 aluminum for long-term durability and corrosion resistance
• CNC-machined for a precise fitment and balanced rotation
• 3/4" thickness designed to maintain optimal tail shaft engagement on lifted trucks
• Includes all necessary high-grade installation hardware
• Manufacturer Part Number: ZONF5601

Fits select 1999-2022 Ford F-250 and F-350 Super Duty models.

Restore proper driveline geometry on your lifted Super Duty with the Zone Offroad carrier bearing drop kit (ZONF5401). This kit is designed specifically for trucks equipped with a 2-piece rear driveshaft to eliminate high-speed vibrations caused by increased suspension height. By lowering the carrier bearing, it repositions the shaft to mimic factory operating angles, ensuring smooth power delivery and reduced wear on U-joints.

Constructed from heavy-duty steel and finished in a durable black powder coat, this kit is built to withstand the rigors of heavy towing and off-road use. Each kit includes all necessary mounting hardware for a straightforward bolt-on installation.

• Eliminates rear driveline vibrations on lifted applications
• Corrects rear driveshaft angles for trucks with 2-piece driveshafts
• Durable steel construction with a corrosion-resistant powder-coated finish
• Direct bolt-on installation into factory mounting points
• Complete kit includes all required mounting hardware
• Manufacturer Part Number: ZONF5401

Fits 2021-2025 Ford Bronco.

Maintain your alignment settings even under the most demanding off-road conditions with Zone Offroad Cam Lockout Plates. These plates are engineered to replace the factory eccentric cams, which are prone to rotating or slipping during hard impacts and extreme articulation. By locking the lower control arm mounting points in place, you ensure your Bronco stays within spec during trail rides and high-speed maneuvers.

Constructed from heavy-duty laser-cut steel, these lockout plates feature 15 distinct positions to provide a wide range of adjustment for both stock and lifted vehicles. Whether you are running factory or aftermarket control arms, these plates provide the stability needed to prevent your alignment from being "knocked out." Each piece is finished in a durable black e-coating for maximum corrosion resistance and long-term durability.

• 15 lockout positions to correct alignment settings at various ride heights
• Prevents cam rotation and slipping during hard off-road impacts
• Heavy-duty laser-cut steel construction with durable black e-coating
• Compatible with both stock and aftermarket control arms
• Easy bolt-on installation using factory mounting locations
• Designed and manufactured in the USA
• Manufacturer Part Number: ZONF5301

Fits select 2008-2023 Ford F-250 and F-350 Super Duty trucks.

When leveling a later model Super Duty, the factory track bar geometry often pulls the front axle off-center, which can lead to spring-to-frame interference and compromised steering feel. The Zone Offroad front track bar bracket is engineered to correct this on trucks equipped with 1-3" of lift. This heavy-duty bracket recenters the axle while ensuring the track bar operating angle remains in phase with the steering linkage for optimal handling and geometry.

Constructed from 1/4" high-strength steel, this fully welded bracket is built to handle the rigors of heavy-duty use. It features a cam slot and offset cam locks for precise axle centering and is designed as a direct bolt-in replacement for the factory bracket. This component is an essential upgrade for leveled F-250/F-350 trucks and is compatible with most leveling kits currently available.

• Material: High-strength 1/4" steel, fully welded
• Adjustment: Integrated cam slot with offset cam locks to recenter front axle
• Installation: Direct bolt-in design replaces factory bracket
• Compatibility: Engineered for 1" to 3" lift heights
• Application: Eliminates spring-to-frame interference and restores steering geometry
• Manufacturer Part Number: ZONF5252

Fits 1999-2004 Ford F-250 and F-350 Super Duty (XL, XLT, Lariat, King Ranch, and Harley-Davidson Edition).

Upgrade your factory front track bar for improved steering control and precise axle positioning with this high-strength adjustable replacement. Designed to solve the common issue of the front axle being pulled off-center after installing a suspension lift, this track bar allows you to re-center the axle across a wide range of lift heights, ensuring proper suspension geometry and tracking.

The ZONF5251 is engineered for ease of maintenance and reliability. It features a fine-threaded center turnbuckle that allows for fine-tuning while the bar is installed on the vehicle, eliminating the need to remove the bar for every adjustment. Once positioned, heavy-duty pinch-bolt clamps lock the turnbuckle in place for a secure, no-slip setting. This unit comes fully assembled and ready to install as a direct-fit replacement for the OE component.

• Adjustment Range: Approximately 30.25 to 33.25 inches
• Adjustment Style: Fine-threaded center turnbuckle
• Locking Hardware: Pinch-bolt clamps
• Construction: High-strength steel for off-road durability
• Manufacturer Part Number: ZONF5251

Fits 2000-2005 Ford F-250/F-350 Super Duty and Ford Excursion models.

When lifting your truck, the factory front sway bar links often reach an extreme angle that compromises handling and increases wear on bushings. These Zone Offroad heavy-duty sway bar links are designed to restore proper operating geometry for vehicles equipped with 4-inch lift kits, significantly improving on-road stability and performance.

Built to withstand the demands of a lifted suspension, these links replace worn OE components with a much stronger 5/8-inch solid steel center section. The included black urethane eyelet bushings provide a firmer, more responsive feel compared to factory rubber, while the clear zinc plating ensures the links remain protected against the elements and corrosion.

• HD design with 5/8-inch solid steel center section
• Clear zinc plated finish for long-lasting corrosion resistance
• High-performance black urethane eyelet bushings
• Designed specifically for use with 4-inch lift kits
• Complete with all necessary mounting hardware and sleeves
• Manufacturer Part Number: ZONF5201

Fits 1999-2004 Ford F-250 and F-350 Super Duty.

Gain additional tire clearance and level the stance of your truck with the Zone Offroad 1-inch Front Shackle Lift. This kit provides a straightforward way to achieve a small front-end lift by replacing the factory leaf spring shackles. It is an ideal solution for Ford Super Duty owners looking to fit slightly larger tires or eliminate the factory rake without the complexity of a full suspension system replacement.

Built for durability and precise fitment, these shackles are designed as a direct bolt-on upgrade, utilizing the existing mounting points on the vehicle's frame. This ensures a secure installation that maintains reliable suspension geometry and ride quality.

• Provides 1 inch of front lift for a leveled vehicle profile
• Heavy-duty steel construction for long-term durability
• Direct bolt-on installation to factory mounting points
• Compatible with 1999-2004 Ford F-250 and F-350 Super Duty models
• Manufacturer Part Number: ZONF5101

Fits 1999-2004 Ford F-250 and F-350 Super Duty (XL, XLT, Lariat, King Ranch, and Harley-Davidson Edition).

This Zone Offroad 2.5-inch leveling kit is designed to eliminate the factory nose-down rake of your 1999-2004 Ford Super Duty, providing a level profile and creating additional clearance for larger wheel and tire combinations. Engineered to maintain factory ride quality, this kit solves the common issue of front-end sag while enhancing the truck's aggressive stance and off-road capability.

• Front Lift Height: 2.5 Inches
• Corrects factory rake for a level appearance
• Increases ground clearance for larger tire fitment
• Direct fit for 1999-2004 Super Duty platforms
• Manufacturer Part Number: ZONF4

Fits 2021-2025 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage, Outer Banks, Raptor, and Wildtrak.

The Zone Offroad Upper Control Arm (UCA) kit is engineered to correct suspension geometry and restore alignment specs on Broncos equipped with 1-inch to 4-inch lift kits. By indexing and relocating the ball joint position, these arms provide a significantly improved range of motion and increased suspension travel compared to factory components. This design also optimizes clearance for larger tire and wheel combinations, ensuring your suspension performs reliably off-road.

Constructed from high-strength steel castings, these UCAs are built for durability in demanding environments. Please note that installation requires pressing the factory ball joints out of the original arms and into the Zone Offroad UCAs using a ball joint press (ATD 8696 or equivalent). For safety and component integrity, never use a hammer on the aluminum knuckle; always use an appropriate ball joint separation tool such as the OTC 204-592.

• Corrects caster and camber for 1" to 4" lift heights
• Indexed ball joint cup for increased travel and reduced binding
• High-strength cast steel construction for maximum durability
• Designed specifically for optimized suspension and tire clearance
• Maintains factory-like ride quality and handling
• Manufacturer Part Number: ZONF2303
• Proudly manufactured in the USA

Fits 2004-2020 Ford F-150 models including Raptor, SVT Raptor, FX4, XL, XLT, Lariat, and Platinum.

Upgrade your truck's factory suspension with the Zone Offroad Adventure Series upper control arms. Designed as a direct bolt-on replacement, these high-strength arms are engineered to improve suspension droop travel and provide the clearance needed for leveled and lifted applications. Each arm is constructed from heavy-duty plate steel, boxed, gusseted, and fully welded for maximum rigidity.

These control arms feature indexed ball joint cups that are CNC-machined to correct the ball joint angle on lifted trucks, preventing premature wear. The included high-strength ball joints are fully greasable and protected by a cap to keep out trail debris. To maintain factory-level quietness and longevity, Zone Offroad utilizes OE-style rubber bushings at the frame mounts for maintenance-free operation.

• Fits 2004-2020 Ford F-150 (all trims)
• Fully welded boxed and gusseted plate steel construction
• CNC-machined ball joint cups indexed for leveled/lifted geometry
• Greasable ball joints with protective debris caps
• OE-style rubber bushings for quiet, service-free life
• Fully assembled and ready for bolt-on installation
• Manufacturer Part Number: ZONF2300

Fits 2021-2025 Ford Bronco 2-door and 4-door models, specifically engineered for Badlands and Sasquatch-package trims.

This Zone Offroad 2" lift kit provides a leveled stance by eliminating factory nose-low rake while accommodating up to 35" tires. Designed to utilize the Bronco's factory coilover suspension, this kit employs top-mounted strut spacers to increase ground clearance without compromising factory ride quality or overall drivability. The spacers are constructed from heavy-duty, semi-aromatic glass-fiber reinforced nylon resin for high strength and a clean, integrated OE appearance.

• Maintains factory ride quality and drivability within OE operating limits
• Front spring perch spacers and bump stop extensions prevent overextension of steering and driveline components
• Designed to work seamlessly with factory upper control arms
• Accommodates up to 35" tire and wheel packages
• Includes all necessary high-grade hardware and step-by-step instructions
• Manufacturer Part Number: ZONF1221

Fits 2021-2022 Ford Bronco Base, Big Bend, Black Diamond, and Outer Banks (Does not fit Sasquatch or Badlands models).

Building on the 4-corner coilover design of the 2021-2022 Ford Bronco, Zone Offroad offers this 2-inch front and 1-inch rear lift solution to level the vehicle's stance. By eliminating the factory nose-low rake, this kit provides clearance for up to 35-inch tires while maintaining factory ride quality and drivability. The spacers are engineered to take advantage of the Bronco's suspension travel without overextending components.

Each spacer is manufactured from heavy-duty semi-aromatic glass-fiber reinforced nylon resin, providing high structural strength and a clean OE appearance. The top-mount design allows for a straightforward bolt-on installation that works within the operating limits of the factory upper control arms (UCAs).

• Manufacturer Part Number: ZONF1220
• Lift Height: 2" Front / 1" Rear
• Material: Glass-fiber reinforced nylon resin
• Tire Clearance: Up to 35" tires
• Installation: Simple bolt-on, top-mount design
• No strut disassembly required (slight compression needed to rotate top hat)
• Includes longer replacement hardware and step-by-step instructions

Improve the stance and off-road capability of your vehicle with the Zone Offroad Adventure Series 2.25-inch lift kit. This system is engineered specifically for the 2022-2023 Ford Bronco equipped with the HOSS 3.0 suspension package (High-Performance Off-Road Stability Suspension), ensuring compatibility with the factory internal bypass shocks and steering geometry.

This kit provides the necessary clearance to run larger wheel and tire combinations while maintaining the factory ride quality and handling characteristics. The Adventure Series components are designed to withstand the rigors of trail use, providing a reliable lifting solution that bolts directly to factory mounting points without requiring extensive modifications.

• Fits 2022-2023 Ford Bronco (HOSS 3.0 Models ONLY)
• Lift Height: 2.25 inches
• Specifically tuned for HOSS 3.0 internal bypass shock equipped models
• Maintains factory ride quality and suspension geometry
• Durable construction for reliable off-road performance
• Manufacturer Part Number: ZONF120

Fits 2021 Ford Bronco models. This Zone Offroad 1-inch leveling kit (MPN ZONF1102) is engineered to level the stance of your vehicle by eliminating the factory nose-down rake. This modest lift provides additional ground clearance and allows for the fitment of larger tire and wheel combinations while maintaining the original factory ride quality and suspension geometry.

Designed for durability and precise fitment, the kit utilizes high-strength spacers that integrate seamlessly with the factory strut assemblies. This bolt-on solution requires no permanent modifications, making it an ideal choice for owners looking to enhance their Bronco's profile and off-road capability without overcomplicating the suspension system.

• Lift Height: 1.0 Inch
• Application: Front suspension leveling
• Manufacturer Part Number: ZONF1102
• Installation: Direct bolt-on with included hardware
• Finish: Corrosion-resistant coating for long-term durability

Fits 1999-2005 Ford F-250/F-350 Super Duty and Ford Excursion (including 4WD models).

Level your front end without compromising ride comfort. The Zone Offroad 5-leaf mini pack is engineered to provide lift through the physical thickness of the leaf stack rather than by forcing a higher arch into your factory springs. This design prevents the stiff, harsh ride often associated with traditional single-leaf add-a-leaf kits, keeping your Super Duty or Excursion handling with OE-style characteristics while providing the clearance you need.

• Lift Height: Approximately 2.5" for Super Duty / 4" for Excursion
• Construction: 5-leaf mini pack stack
• Performance: Maintains factory ride quality and handling
• Manufacturer Part Number: ZONF0202

Fits select 2013-2017 Ram 1500 trucks equipped with a Zone Offroad 4-6 inch suspension lift kit. This replacement tie rod end is designed to restore factory-style steering responsiveness and handling by replacing worn components specifically used in lifted applications.

Built to meet application-specific tolerances, this heavy-duty tie rod end ensures proper geometry and alignment stability for trucks running larger wheel and tire packages. Whether performing routine maintenance or servicing a high-mileage lift, this component provides a direct-fit solution to eliminate steering play.

• Replacement tie rod end for Zone Offroad 4-6 inch lift kits
• Restores steering precision and dampens road feedback
• Heavy-duty construction for durability in lifted applications
• Includes (1) tie rod end
• Manufacturer Part Number: ZOND8613

Fits select 2006-2012 Dodge Ram 1500 and Ram 1500 trucks equipped with a Zone Offroad 4-inch to 6-inch suspension lift kit.

Restore precise steering control and eliminate front-end play with this heavy-duty replacement tie rod end. Engineered specifically for vehicles running Zone Offroad 4-6" lift systems, this component (MPN: ZOND8612) handles the modified steering geometry and increased stress of a lifted application. Unlike many sealed OE units, this tie rod end features a greaseable design, allowing you to flush out contaminants and maintain lubrication for a significantly longer service life.

• Manufacturer Part Number: ZOND8612
• Engineered specifically for trucks with Zone Offroad 4-inch to 6-inch lifts
• Greaseable design for enhanced durability and serviceability
• Direct-fit replacement for worn steering components
• Includes: (1) Greaseable Tie Rod End

Fits 2002-2005 Dodge Ram 1500 SLT, ST, and Laramie trucks equipped with a Zone Offroad 5-inch suspension lift kit.

Maintain precise steering control and eliminate front-end play with this heavy-duty replacement tie rod end from Zone Offroad. Specifically engineered to work with the geometry of the Zone 5-inch lift system, this component replaces worn or damaged tie rod ends that can lead to steering wander, uneven tire wear, and reduced handling performance. The greaseable design allows for regular maintenance to purge contaminants and ensure a long service life in demanding off-road conditions.

• Specifically designed for Dodge Ram 1500 with Zone Offroad 5" lift kits
• Greaseable design for increased durability and serviceability
• Direct-fit replacement for the steering linkage
• Restores factory-like steering feel and responsiveness
• Manufacturer Part Number: ZOND8611
• Includes (1) tie rod end

Fits select 2006-2022 Dodge and Ram 1500 models (including 1500 Classic) equipped with Zone Offroad D2301 upper control arms.

Keep your suspension performing at its peak with this application-specific replacement ball joint master kit. Designed as a direct service part for the D2301 upper control arms, this kit provides everything needed to refresh a worn joint, restoring smooth articulation and tight handling. The greaseable design ensures a long service life, while the red anodized aluminum dust cap provides a clean, corrosion-resistant finish that protects the internals from trail debris and road grime.

• Specifically designed for Zone Offroad D2301 Upper Control Arms
• Greaseable design with included Zerk fitting for easy maintenance
• Red anodized aluminum dust cap for superior protection and aesthetics
• Comprehensive hardware kit for a complete installation
• Manufacturer Part Number: ZOND8311

Kit Includes: (1) Ball joint with nut, red anodized aluminum dust cap, O-ring, grease Zerk fitting, cotter pin, and snap ring (where applicable).

Fits select 2009-2025 Ford F-150 and 2013-2022 Ram 2500/3500 trucks. This Zone Offroad carrier bearing drop kit is engineered to eliminate driveline vibrations in lifted trucks by correcting rear driveshaft angles. On vehicles equipped with a two-piece rear driveshaft, lifting the suspension increases the operating angle at the carrier bearing; this kit realigns the component to maintain smooth power delivery and prevent premature wear on U-joints and seals.

• Adjustable design allows for a 1/8-inch to 2-inch drop to precisely fine-tune rear driveline angles.
• Heavy-duty steel construction provides long-lasting structural integrity.
• Dual-layered protection featuring both zinc plating and a black powder-coated finish for superior corrosion resistance.
• Easy-to-install bolt-on design for a straightforward upgrade.
• Includes all necessary mounting hardware for a complete installation.
• Manufacturer Part Number: ZOND5406

Fits 2002-2005 Dodge Ram 1500 Laramie, SLT, and ST models.

Maintain proper suspension geometry and ride quality on your leveled truck with Zone Offroad shock extension brackets. These relocation brackets are specifically engineered for 2002-2005 Dodge Ram 1500 pickups equipped with 2-inch leveling kits. By moving the lower shock mounting point higher on the control arm, these extensions prevent factory shocks from topping out, ensuring full droop travel and protecting internal shock valving during suspension cycling.

Constructed from heavy-duty steel and finished in a durable textured black powdercoat, these brackets are built to withstand off-road use and environmental corrosion. The simple bolt-on design installs directly to the lower control arm, allowing you to retain your factory shocks while benefiting from the increased stance of a leveling kit.

• Allows the use of factory shocks with 2-inch leveling kits
• Relocates lower shock mount to restore full droop and suspension travel
• Heavy-duty steel construction for maximum durability
• Textured black powdercoat finish for long-lasting corrosion resistance
• Simple bolt-on installation to factory mounting points
• Manufacturer Part Number: ZOND5201

Fits select 1988-1994 Chevrolet and GMC C1500/K1500 models across all cab and bed configurations. This kit is specifically designed for gasoline-engine vehicles and will not fit diesel models.

The Zone Offroad 3-inch body lift kit offers an effective solution for increasing tire clearance without altering your factory suspension geometry or ride quality. This 100% bolt-on system (MPN: ZONC9357) includes high-strength, CNC-machined replacement steering knuckles to correct steering angles and maintain precise handling. To preserve the truck's factory aesthetic, the kit comes with front and rear bumper relocation brackets that keep the body lines aligned after the lift.

Engineered for a complete installation, the kit also includes critical cooling and fueling components such as fan shroud relocation hardware and a fuel filler hose extension. Please note that the included rear bumper brackets are for appearance only and are not rated for towing; a frame-mounted hitch is required for all towing applications.

• 3-inch lift height for improved ground and tire clearance
• High-strength, CNC-machined steering knuckles
• Front and rear bumper relocation brackets to maintain OE appearance
• Fuel filler hose extension and fan shroud relocation components included
• 100% bolt-on design for a straightforward installation
• Includes all necessary hardware and detailed instructions
• Manufacturer Part Number: ZONC9357

Fits 2016-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks across all submodels. This Zone Offroad 1.5-inch body lift kit (ZONC9158) provides the necessary clearance for larger tire and wheel combinations without altering the factory suspension geometry or ride quality.

By raising the body and bumpers relative to the frame, this kit maintains factory body lines while accommodating oversized tires. The system utilizes high-strength, indestructible body mount blocks and robust Grade 8 hardware for long-term durability in demanding conditions. Unlike basic kits, this comprehensive solution includes front and rear bumper relocation brackets, a steering extension, and an emergency brake line relocation bracket to ensure proper component alignment and function.

• Provides 1.5 inches of additional body lift for larger tire clearance
• Maintains original factory ride quality and handling characteristics
• Front and rear bumper relocation brackets included to preserve OE appearance
• Retains factory front tow hook functionality
• Constructed with indestructible body blocks and Grade 8 mounting hardware
• Includes steering extension, e-brake relocation, and bed support spacers
• Manufacturer Part Number: ZONC9158

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

This Zone Offroad replacement tie rod end kit is engineered as a direct-fit service part for vehicles equipped with Zone 4-inch to 6-inch suspension systems. Designed to restore steering precision and maintain correct geometry, this heavy-duty component replaces worn or damaged tie rod ends common in lifted applications where steering angles and stresses are increased.

• Designed specifically for Zone Offroad 4" to 6" lift kits
• Restores factory-style steering response and alignment stability
• Heavy-duty construction to handle lifted vehicle dynamics
• Includes one (1) replacement tie rod end
• Manufacturer Part Number: ZONC8601 (Compatible with kits C2660/C2661)

Fits 2001-2024 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models equipped with Zone Offroad aftermarket control arms.

Maintain the precision and safety of your front suspension with the Zone Offroad Master Service Kit (ZONC8213). This kit is engineered specifically for vehicles running Zone Offroad control arms, providing a direct-fit solution to replace worn ball joints. Each kit contains all the hardware required to service one control arm, featuring a heavy-duty press-in ball joint designed to withstand the rigors of lifted applications and heavy-duty use.

The included grease zerk allows for regular maintenance to ensure long-term reliability, while the signature red anodized aluminum dust cap protects the assembly from moisture and road debris. This comprehensive kit ensures a complete repair without the need to source individual hardware components.

• Manufacturer Part Number: ZONC8213
• Includes (1) heavy-duty press-in ball joint
• Includes snap ring, cotter pin, and gasket
• Serviceable design with integrated grease zerk
• Features a red anodized aluminum dust cap
• Designed specifically for Zone Offroad control arms

Fits select 1999-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Zone Offroad Rear Add-A-Leaf Kit (ZONC6159) is an effective solution for truck owners looking to increase rear ride height and improve load-carrying capacity. These leafs are designed to be integrated into your vehicle's existing rear leaf packs, providing additional lift and support without creating a harsh, unmanageable ride quality during daily driving. This kit is ideal for leveling out your truck's stance or compensating for heavy bed loads and towing applications.

• Increases rear lift height and load capacity
• Maintains factory-style ride quality
• Includes alignment clamps to prevent leaf shifting
• Provides necessary center pins for secure installation
• Replaces or augments factory leaf spring components
• Manufacturer Part Number: ZONC6159

Kit Includes: One pair of rear add-a-leafs, two center pins, and alignment clamps.

Fits select 2007-2017 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

Add essential front-end protection to your lifted truck or SUV with the Zone Offroad front skid plate. Specifically engineered for vehicles equipped with Zone Offroad 4.5-inch or 6.5-inch suspension lift kits, this plate replaces the vulnerable factory plastic splash guard with a heavy-duty steel alternative. It provides a rugged barrier against trail debris while enhancing the underbody aesthetics of your GM 1500.

Constructed from high-strength 10-gauge steel, this skid plate is CNC laser-cut for a precise fit and features a durable textured black powdercoat finish to resist corrosion and abrasion. The integrated laser-cut Zone logo provides a clean, finished look. Installation is straightforward, utilizing the front crossmember mounting points for a secure, bolt-on fit.

• Specifically designed for use with Zone Offroad 4.5-6.5 inch suspension lifts
• Fabricated from high-strength 10-gauge steel
• Durable textured black powdercoat finish for longevity
• CNC laser-cut Zone branding
• Directly replaces factory plastic splash guard
• Manufacturer Part Number: ZONC5651

Fits select 2011-2019 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD. These Zone Offroad front shock extension spacers are engineered to solve the common issue of restricted suspension travel after installing a 2-inch torsion bar key leveling kit.

When the front end is leveled using aftermarket keys, the factory shock absorbers often become the limiting factor in suspension droop. These spacers install directly onto the upper factory shock studs, effectively extending the shock's reach and restoring the full range of motion. This allows you to retain your original equipment shocks while ensuring the suspension can cycle properly without topping out the shock internals.

• Allows for full suspension droop travel with 2-inch torsion bar keys installed
• Mounts to upper factory shock studs for a straightforward installation
• Cost-effective alternative to purchasing longer aftermarket shocks
• Maintains factory ride quality by keeping shocks within their intended operating range
• Manufacturer Part Number: ZONC5202

Fits select 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 (4WD/2WD) equipped with factory aluminum or stamped steel control arms.

This Zone Offroad component box is a foundational element for 4.5-inch and 6.5-inch suspension lift systems. Engineered specifically for GM 1500 trucks with aluminum or stamped steel factory suspension components, this box contains the critical brackets and hardware required to correct suspension geometry and maintain proper alignment after lifting. Every component is built to withstand the rigors of off-road use while maintaining a factory-like ride quality on the pavement.

• Manufacturer Part Number: ZONC2652
• Compatibility: Designed for trucks with factory aluminum or stamped steel control arms
• Application: Core component for 4.5" or 6.5" Zone Offroad lift systems
• Heavy-duty construction to maintain suspension integrity and alignment
• Precision-engineered for 2014-2018 GM 1500 platforms