Fits 2011-2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks.

The Zone Offroad Adventure Series upper control arm kit (ZONC2312) is engineered to solve geometry issues and improve durability on leveled or lifted HD trucks. These arms are constructed from high-strength plate steel, boxed and gusseted for significantly more rigidity than factory units. The CNC-machined ball joint cups are indexed to correct the ball joint position, providing a greater range of motion and preventing binding on trucks with increased ride heights.

• Fully welded boxed and gusseted plate steel construction for maximum strength
• CNC-machined ball joint cups indexed specifically for leveled and lifted applications
• Heavy-duty greaseable ball joints include protective caps to keep out road debris
• OE-style rubber bushings ensure quiet operation and a long, maintenance-free service life
• Pre-assembled and ready for a direct bolt-on installation using factory mounting points
• Manufacturer Part Number: ZONC2312

Fits 2019-2025 Chevrolet Silverado 1500 and 2019-2023 GMC Sierra 1500 4WD models. This system is compatible with ARC (Adaptive Ride Control) equipped trucks but has not been tested on ZR2, AT4X, or models equipped with Super Cruise.

Level the stance of your GM 1500 without compromising factory ride quality or suspension geometry. The Zone Offroad ZONC1241 kit provides 2 inches of front lift to clear up to 295/70R17 tires while addressing a common weak point: the factory upper control arms. These heavy-duty replacement arms are designed to maintain a proper range of motion for the ball joints at increased ride heights, preventing premature wear and binding during suspension travel.

Each kit includes optional weld-on steering stop extensions for the lower control arms to resolve tight clearance issues with specific tire/wheel combinations. Note that stock wheels and tires require 1/4-inch wheel spacers to ensure adequate clearance from the upper ball joint and control arm during turns.

• Manufacturer Part Number: ZONC1241
• Lift Height: 2 Inches
• Includes heavy-duty Upper Control Arms (UCAs)
• High-strength Grade 8 mounting hardware included
• Long-term corrosion-resistant finish
• Optional weld-on steering stop extensions included
• Compatible with ARC (Adaptive Ride Control)

Tire & Wheel Fitment:
295/70R17 - Stock Wheel
295/65R18 - Stock Wheel
295/60R20 - Stock Wheel
285/60R20 - 5" Backspacing

Fits 2014-2019 Cadillac Escalade/ESV, Chevrolet Silverado 1500/Tahoe, and GMC Sierra 1500/Yukon/XL models equipped with MagneRide.

Level the stance of your truck or SUV while maintaining the sophisticated ride quality of your electronic suspension. The Zone Offroad 2-inch leveling kit (ZONC1221) is specifically engineered to accommodate the MagneRide system, utilizing lower strut spacers that bolt directly to factory mounting points. Unlike generic kits that can interfere with electronic dampening, this solution includes dedicated sensor relocation brackets to keep the MagneRide system within its intended operating range.

By raising the front end, this kit provides clearance for up to 34-inch tires while correcting the factory rake. The heavy-duty hardware and precision-fit spacers ensure a straightforward installation that preserves OE ride characteristics and suspension travel.

• Maintains full MagneRide system functionality with included relocation brackets
• Provides 2 inches of lift for a level stance and increased ground clearance
• Clearance for up to 34-inch tire and wheel combinations
• Direct-fit lower strut spacers and high-grade mounting hardware
• Retains factory ride quality and handling performance
• Manufacturer Part Number: ZONC1221

Fits 2015-2022 Chevrolet Colorado and GMC Canyon (all models including ZR2 and AT4).

Level the stance of your mid-size truck with the Zone Offroad 1.25-inch top-mounted strut spacer leveling kit. This system is engineered to eliminate the factory rake, providing a level profile and increased ground clearance for up to 32-inch tires. Constructed from precision laser-cut steel and finished in a durable black e-coat, these spacers are built to resist corrosion and withstand heavy-duty use.

Designed for a straightforward installation, this kit is completely bolt-on and requires no strut disassembly or coil spring compression. By mounting to the top of the factory strut, it maintains the original ride quality and suspension geometry while providing the necessary lift for a more aggressive look and larger wheel/tire combinations.

• Lift Height: 1.25 inches
• Material: Precision laser-cut steel
• Finish: Black e-coated for superior corrosion protection
• Max Tire Size: 32 inches
• Installation: 100% bolt-on; no strut disassembly required
• Included: (2) Strut spacers and all required mounting hardware
• Manufacturer Part Number: ZONC1121
• Warranty: Limited Lifetime Warranty

Fits select 1973-1991 Chevrolet and GMC K-Series (K10/K20/K15/K25), V-Series (V10/V20/V1500/V2500), Suburban, Blazer, and Jimmy models. This 4-inch lift front leaf spring is engineered to restore height or provide additional clearance while maintaining factory ride quality.

Construction features a 5-leaf pack designed for durability and consistent performance. To ensure quiet and smooth operation, Zone Offroad incorporates anti-friction pads and center leaf spacer plates between each leaf. This design reduces internal friction, preventing the squeaking and harshness often associated with heavy-duty leaf packs.

• Provides 4" of suspension lift
• 5-leaf pack configuration for optimal support
• Includes anti-friction pads for quiet operation
• Center leaf spacer plates reduce internal friction and wear
• Direct replacement for factory front leaf springs
• Manufacturer Part Number: ZONC0401

Note: Springs are sold individually. Bushings are required for installation and are sold separately.

Fits select 1984-2006 Jeep Cherokee and Wrangler models. This Zone Offroad Nitro Series shock absorber (ZON7980) provides superior control compared to standard twin-tube shocks by utilizing a 50 psi nitrogen gas charge. This pressurized design significantly reduces fluid aeration, ensuring split-second response and consistent damping through 10-stage velocity-sensitive valving.

Engineered for durability on and off-road, the shock features a heavy-duty steel alloy body with dual-welded ends and a 14mm heavy chrome shaft. The internal Fluon-banded piston ensures a consistent seal against the inner cylinder for long-term reliability. These shocks are sold individually and include the necessary bushings and sleeves for a direct-replacement installation.

• Twin-Tube Design: Nitrogen-charged for reduced fade and improved response.
• Construction: Steel alloy body with a 14mm heavy chromed shock shaft.
• Valving: 10-stage velocity-sensitive valving for improved compression and extension travel.
• Dimensions: 22.95-inch extended length, 14.65-inch collapsed length, 2-inch body diameter.
• Included Hardware: Polyurethane bushings and metal sleeves for easy installation.

Fits 1999-2004 Jeep Grand Cherokee Laredo, Limited, Overland, Special Edition, and Sport.

The Zone Offroad Nitro Series shock absorber is engineered to provide a significant upgrade over factory units, offering consistent control through a twin-tube, nitrogen-charged design. Pressurized with 50 psi nitrogen gas, this shock features fully displaced, 10-stage velocity-sensitive valving to ensure split-second response times and significantly reduced fluid aeration during high-cycle use. The Fluon-banded piston ensures a consistent seal against the steel alloy body for long-term durability on and off the trail.

Built for the rigors of daily driving and weekend wheeling, these shocks utilize a 14mm heavy chromed shaft and dual-welded ends for maximum structural integrity. Each shock includes the necessary bushings and sleeves for a direct-replacement installation into factory mounting points.

• Twin-tube nitrogen charged design for consistent dampening performance
• 10-stage velocity sensitive valving for improved compression and extension travel
• 14mm heavy chromed shock shaft resists pitting and corrosion
• Fluon-banded piston and 50 psi gas charge for reduced fade
• Includes required bushings and sleeves for installation
• Sold individually
• Manufacturer Part Number: ZON7978

Fits 1999-2004 Jeep Grand Cherokee Laredo, Limited, Overland, Special Edition, and Sport models.

The Zone Offroad Nitro Series shock absorber (ZON7971) is a nitrogen-charged, twin-tube damper designed to provide superior control for both highway driving and off-road excursions. Featuring 10-stage velocity-sensitive valving, these shocks react instantly to terrain changes, offering increased damping during high-speed compression while maintaining smooth extension travel. The 50 psi nitrogen gas charge minimizes oil aeration and shock fade, ensuring consistent performance during sustained use.

Engineered for durability, the Nitro Series features a heavy-duty steel alloy body with dual-welded ends and a 14mm hard-chromed shaft. A Fluon-banded piston provides a precision seal against the cylinder wall to reduce internal friction and heat. These shocks are a direct replacement for factory units and include all necessary bushings and sleeves for a bolt-on installation.

• Extended Length: 26.20 in
• Collapsed Length: 15.65 in
• Body Diameter: 2-3/8 in
• Mounting: EB1 Eyelet (Top and Bottom)
• Valving: 10-Stage Velocity Sensitive
• Construction: Twin-Tube Steel Alloy
• Shaft Diameter: 14mm Hard Chrome
• Part Number: ZON7971

Note: Shock absorbers are sold individually.

Fits select 1984-2006 Jeep Cherokee, Comanche, Grand Cherokee, and Wrangler models.

The Zone Offroad Nitro Series shock absorber (ZON7965) provides a significant upgrade over factory dampening with a twin-tube, nitrogen-charged design. Pressurized at 50 psi, this gas charge ensures a split-second response and effectively reduces fluid aeration during rapid cycling. The shock features 10-stage velocity-sensitive valving, allowing for precise control across varying terrain by adjusting damping resistance based on shaft speed.

Built for durability in off-road environments, this shock is constructed with a steel alloy body featuring dual welded ends and a 14mm heavy chromed shock shaft. The internal Fluon-banded piston ensures a consistent seal and smooth operation throughout the stroke. These shocks are sold individually and include the necessary bushings and sleeves for a direct-replacement installation into factory mounting points.

• Extended Length: 24.70 in
• Collapsed Length: 14.80 in
• Body Diameter: 2-3/8 in
• Mounting Style: S1/BP7
• 10-stage velocity sensitive valving for optimized compression and extension
• 50 psi nitrogen gas charge to prevent fade and cavitation
• 14mm heavy chromed shaft with steel alloy body
• Manufacturer Part Number: ZON7965
• Includes bushings and sleeves

The Zone Offroad Nitro Series shock absorber (ZON7956) is engineered to provide superior control and durability for both off-road and street use. Utilizing a twin-tube, nitrogen-charged design pressurized to 50 psi, this shock reduces fluid aeration and ensures a split-second response during rapid suspension cycling. The 10-stage velocity-sensitive valving offers a balanced ride, significantly improving compression and extension travel over standard units.

• Extended Length: 29.8in | Collapsed Length: 17.6in | Body Diameter: 2-3/8in
• Mounting Configuration: S1 Stem Mount / EB1 Eyelet Bushing
• Heavy-duty steel alloy body with dual-welded ends for maximum structural integrity
• 14mm heavy chromed shock shaft for corrosion resistance and long seal life
• Fluon-banded piston provides a consistent seal between the piston and pressure tube
• Includes required bushings and sleeves for a direct-replacement installation
• Sold individually

Fits 2014-2024 Ford F-150.

The Zone Offroad Nitro Series shock absorber is engineered to provide consistent control and performance for your truck. This twin-tube, nitrogen-charged shock utilizes a 50 psi gas charge to ensure split-second response and eliminate aeration during rapid cycling. With fully displaced, 10-stage velocity-sensitive valving, this shock provides improved compression and extension travel for both on-road comfort and off-road durability.

Constructed for longevity, the Nitro Series features a durable steel alloy body with dual welded ends and a 14mm heavy chromed shaft. A Fluon-banded piston ensures a reliable seal and smooth operation over thousands of miles. These shocks are sold individually and include the necessary bushings and sleeves for a direct replacement installation into factory mounting points.

• Twin-tube design with 50 psi nitrogen gas charge
• 10-stage velocity sensitive valving for optimized damping
• 31.00in Extended | 18.20in Collapsed | 2-3/8in Body diameter
• EB1/EB1 eyelet mounting style
• 14mm heavy chromed shock shaft and steel alloy body
• Includes bushings and sleeves for easy installation
• Manufacturer Part Number: ZON7828

Fitment Information: Fits 2014-2024 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, and Police Responder packages.

Fits 2002-2008 Dodge Ram 1500 2WD/4WD models including Laramie, SLT, Sport, ST, SXT, and TRX4.

The Zone Offroad Nitro Series shock absorber is engineered to provide superior control and performance compared to standard twin-tube shocks. Each shock features 10-stage velocity-sensitive valving that is specifically tuned for the vehicle's weight and suspension geometry, ensuring rapid response to road changes. The internal 50 psi nitrogen gas charge significantly reduces oil aeration, maintaining consistent damping performance even during spirited off-road use or heavy hauling.

Built for durability, the ZON7769 uses a heavy-duty steel alloy body with dual-welded ends. The 14mm hardened chrome shock shaft resists pitting and corrosion, while the special Fluon-banded piston provides a consistent seal against the inner tube for a long service life. These shocks are sold individually and include the necessary bushings and sleeves for a direct-replacement installation.

• Part Number: ZON7769
• Extended Length: 30.95in
• Collapsed Length: 18.20in
• Body Diameter: 2-3/8in
• Mounting Configuration: EB1 Eyelet / EB1 Eyelet
• Construction: Twin-tube with 14mm chromed shaft
• Valving: 10-stage velocity sensitive with Fluon-banded piston
• Gas Charge: 50 psi Nitrogen
• Includes: Bushings and sleeves for factory-style mounting

Fits select 1999-2024 Ford F-150, F-250 Super Duty, and F-350 Super Duty trucks. These vehicles rely on consistent damping to maintain control during both highway towing and off-road articulation.

The Zone Offroad Nitro Series shock absorber (Part Number ZON7763) is engineered to deliver improved compression and extension travel compared to factory components. Utilizing a twin-tube, nitrogen-charged design, these shocks are pressurized with 50 psi nitrogen gas to minimize aeration and provide split-second valving response. The internal 10-stage velocity-sensitive valving is paired with a Fluon-banded piston to ensure smooth operation and durability under varying load conditions.

• Twin-tube design with 50 psi nitrogen gas charge for reduced fade
• 10-stage velocity-sensitive valving for optimized ride quality on or off-road
• Heavy-duty steel alloy body with dual welded ends for maximum strength
• 14mm heavy chromed shock shaft resists corrosion and pitting
• Includes Fluon-banded piston for a consistent seal and longer service life
• Dimensions: 33.00in Extended x 19.25in Collapsed x 2-3/8in Body Diameter
• EB1/EB1 mounting configuration with included bushings and sleeves
• Sold individually

Fits select 1994-2020 Dodge Ram 1500/2500/3500, Chevrolet Silverado/Sierra 1500, and GM full-size SUVs.

The Zone Offroad Nitro Series shock absorber provides a balance of stock-like ride quality and enhanced off-road control. Engineered with a twin-tube, nitrogen-charged design, these shocks utilize 50 psi gas pressure to minimize aeration and reduce shock fade during aggressive use. The fully displaced valving ensures improved compression and extension travel, allowing your suspension to cycle more effectively over varied terrain.

Constructed for longevity, the Nitro Series features a steel alloy body with dual welded ends and a heavy-duty 14mm chromed shaft. Internal friction is minimized via a specialized Fluon-banded piston, ensuring consistent performance and seal integrity. These shocks are sold individually and include all necessary bushings and sleeves for a direct replacement of your factory units.

• Manufacturer Part Number: ZON7719
• Extended Length: 26.20in
• Collapsed Length: 15.65in
• Body Diameter: 2-3/8in
• Mounting Style: EB1 Eyelet (Top and Bottom)
• Valving: 10-stage velocity sensitive
• Charge: 50 psi Nitrogen gas
• Construction: Steel alloy body with 14mm chromed shaft

Fits select 1994-2024 Dodge/Ram 1500/2500/3500, Ford F-250/F-350 Super Duty, Jeep Wrangler JK, and Toyota Tundra.

The Zone Offroad Nitro Series shock absorber is engineered to provide responsive, stock-like control with enhanced performance for both on-road stability and off-road capability. This twin-tube shock features vehicle-specific, 10-stage velocity-sensitive valving that utilizes fully displaced piston travel to improve both compression and extension. To prevent aeration and ensure a split-second damping response, each unit is pressurized with 50 psi nitrogen gas.

Constructed with a durable steel alloy body and dual-welded ends, these shocks are built for longevity. The 14mm heavy chromed shock shaft resists corrosion and pitting, while the internal Fluon-banded piston reduces friction and heat buildup during aggressive cycling. Every Nitro Series shock includes vehicle-specific bushings and sleeves for a direct-replacement installation into factory mounting points.

• Twin-tube, nitrogen-charged design prevents foaming and fade
• 10-stage velocity-sensitive valving for optimized damping
• 50 psi nitrogen gas charge for immediate response
• Fluon-banded piston ensures a consistent seal and smooth operation
• Durable steel alloy body with a heavy-duty 14mm chromed shaft
• Extended Length: 25.20 in
• Collapsed Length: 15.20 in
• Body Diameter: 2-3/8 in
• Mounting Code: S50/EB2
• Sold individually; includes necessary bushings and sleeves
• Manufacturer Part Number: ZON7700

Fits 1999-2005 Ford Excursion and F-250/F-350 Super Duty.

The Zone Offroad Nitro Series shock absorber is engineered to provide improved control and response over factory units. Utilizing a twin-tube, nitrogen-charged design, these shocks feature 10-stage velocity-sensitive valving that automatically adjusts to road or trail conditions. The 50 psi nitrogen charge significantly reduces oil aeration, ensuring rapid, consistent response during high-cycle compression and extension travel. Built for long-term durability, each shock features a steel alloy body with dual-welded ends and a 14mm heavy chromed shaft to resist pitting and corrosion.

• Twin-tube design with 50 psi nitrogen charge for reduced shock fade
• 10-stage velocity-sensitive valving for versatile on- and off-road performance
• Fluon-banded piston provides a consistent seal and smooth operation
• 14mm heavy-duty chromed shock shaft for superior strength
• Includes vehicle-specific bushings and sleeves for a direct replacement installation
• Shock absorbers are sold individually

• Extended Length: 27.90in
• Collapsed Length: 16.55in
• Body Diameter: 2-3/8in
• Mounting Style: EB1/EB1
• Manufacturer Part Number: ZON7651

Fits 2017-2025 Ford F-250 Super Duty models (XL, XLT, Lariat, King Ranch, Platinum, and Limited).

Standard factory steering stabilizers are often insufficient when upgrading to oversized wheels and tires. The Zone Offroad ZON7302 heavy-duty steering stabilizer is engineered to enhance vehicle control by significantly reducing steering shimmy and bump steer. By stabilizing the front-end steering sweep, this system improves tire wear and extends the service life of critical steering components while minimizing the side-to-side motion caused by wide tires and uneven road surfaces.

• Heavy-duty cylinder construction for increased damping capacity
• Reduces front-end shimmy and bump steer associated with oversized tires
• Improves tire wear and front-end component longevity
• Includes all necessary mounting brackets and hardware
• Manufacturer Part Number: ZON7302

Fits 1994-2001 Dodge Ram 1500 4x4 models.

The Zone Offroad Posi-Lok system replaces the failure-prone OEM vacuum-actuated Central Axle Disconnect (CAD) system used to engage the front differential. Vacuum systems are notorious for leaking, failing due to age, or becoming disconnected during off-road use, often leaving you without 4WD when you need it most. This manual cable-operated conversion gives the driver direct, mechanical control over the front axle engagement from inside the cab.

Built for reliability in harsh environments, the Posi-Lok system eliminates the guesswork of vacuum-operated hubs and actuators. It allows for more precise control, including the ability to engage the transfer case in 4WD Low while keeping the front axle disengaged for 2WD Low-range maneuverability.

• Replaces unreliable OEM vacuum actuator (CAD) system
• Provides direct manual engagement of the front differential
• Heavy-duty cable construction for long-term durability
• Includes dash-mounted engagement knob and necessary hardware
• Manufacturer Part Number: PSL400