We could tell you what's behind the name, but we would prefer to define it. Venator represents a sharp departure from typical bumper design- a dominant form, carefully crafted in clay and then forged in steel. Muscular contours and chiseled facets combine with the Venators radical arches, creating a bumper that clearly complements the overall aesthetics of the JL / JT, rather than fighting them. It's like nothing you've seen yet, but we should warn you; the Venator contains some intense visual content- viewer discretion is advised.

• Features Built-In Winch Plate/Massive 1-Inch Thick Recovery Hooks
• Patented Design Features Sculpted Contours And Sweeping Arches
• Octagonal Pockets Accept factory JL / JT Fog Lights
• Muscular Stamped Steel Construction
• Easy Bolt-on Installation

This Part Fits:

We could tell you what's behind the name, but we would prefer to define it. The Venator represents a sharp departure from typical bumper design- a dominant form, carefully crafted in clay and then forged in steel. Muscular contours and chiseled facets combine with a narrow boulder-scaling profile, creating a bumper that clearly complements the overall aesthetics of the JL/ JT, rather than fighting them. The Venator's modern design features massive recovery tow hooks and a Winch tray, built-in and capable of supporting a 12,500 lb. Winch, keeping you equipped for the unexpected. To top off this ultimate bumper package, we've created a stylized overrider with all the visual impact the Venator deserves. With a square sculpted frame and scalloped cross bar that accents the Jeep's iconic slatted grille, the Venator Stubby Front Bumper impresses with a true inspiration of design.

• Features Built-In Winch Plate/Massive 1-Inch Thick Recovery Hooks
• Patented Design Features Sculpted Contours And Sweeping Arches
• Octagonal Pockets Accept factory JL / JT Fog Lights
• Muscular Stamped Steel Construction
• Easy Bolt-on Installation

This Part Fits:

We could tell you what's behind the name, but we would prefer to define it. Venator represents a sharp departure from typical bumper design- a dominant form, carefully crafted in clay and then forged in steel. Muscular contours and chiseled facets combine with the Venators radical arches, creating a bumper that clearly complements the overall aesthetics of the JL / JT, rather than fighting them. It's like nothing you've seen yet, but we should warn you; the Venator contains some intense visual content- viewer discretion is advised.

• Features Built-In Winch Plate/Massive 1-Inch Thick Recovery Hooks
• Patented Design Features Sculpted Contours And Sweeping Arches
• Octagonal Pockets Accept factory JL / JT Fog Lights
• Muscular Stamped Steel Construction
• Easy Bolt-on Installation

This Part Fits:

The Rugged Ridge Arcus Rear Bumper for Wrangler JL is anything but your typical budget-minded bumper. The Arcus represents a daring design departure from the typical, with an alluring stamped-steel body usually reserved for bumpers costing twice the price. This patented design utilizes a high-strength 11-gauge steel shell that looks as great on the trail as it does in your driveway. The Arcus is no lightweight when it comes all those cool options you find on pricier bumpers either, only the Arcus makes them standard equipment. Take our massive 1- in. thick recovery hooks that literally scream HARDCORE…each hook is dual cross-drilled so they accept both 7/8 and ¾- in. D-rings so you're always equipped for recovery. Clever recesses on both sides of the bumper offer direct frame access for effective lifting of the Jeep with an off-road jack. The Arcus Rear Bumper features a high-quality satin black powder coat finish with a fine texture, because nobody said brawny can't be beautiful. Patent Pending.

• Bold Stubby Bumper Profile Perfect For Off-Road Use
• Stamped 11-Gauge Steel Patented-design
• Built-In Off-Road Jack Lifting Points
• Massive 1 in. Thick Recovery Hooks
• w/Dual-Drilled Shackle Mounts
• Limited 5-Year Warranty

This Part Fits:

The Rugged Ridge Arcus Front Bumper Overrider is a rugged accent to the Arcus Front Bumper (11549.01), giving added protection for both grille and radiator and a practical location for mounting off-road lights or trail cameras. Each overrider is built from high-strength tube steel and finished with a matching satin black powder coat for superior resistance from rust and corrosion. Installs easily with the included hardware.

• Patented-Design Made From Stamped 11-Gauge Steel
• Bold Stubby Bumper Profile Perfect For Off-Road
• Includes Sturdy 1/4 In. Thick Steel Winch Tray
• Tough Satin Black Powder Coat Finish
• Easy Bolt-on Installation
• And Tubular Overrider

This Part Fits:

The Rugged Ridge Arcus Front Bumper Overrider is a rugged accent to the Arcus Front Bumper (11549.01), giving added protection for both grille and radiator and a practical location for mounting off-road lights or trail cameras. Each overrider is built from high-strength tube steel and finished with a matching satin black powder coat for superior resistance from rust and corrosion. Installs easily with the included hardware.

• Simple Bolt-On Installation-Works On Any Arcus Front Bumper
• Helps Protect Grille And Radiator From Off-Road Hazards
• Muscular 2.5 In. Diameter Tube Steel Construction
• Tough Satin Black Powder Coat Finish
• Aggressive Sloped Profile
• Adds A Rugged Accent

This Part Fits:

Rugged Ridge engineered the Spartan Series Bumpers for the Jeep enthusiast that wants the look of a classic off-road style bumper without the extra weight and heavy price tag. The Spartan Front Bumpers one-piece design features ultra-aggressive high clearance bumper ends that angle cleanly upward to match the profile of factory fender flares relaying a look of symmetry, style and strength. Each bumper is built from high-strength plate steel that utilizes ford and weld construction for greater structural integrity, precise fit and a high-quality appearance. a rugged textured black powder coat resists rust and corrosion keeping your Spartan bumper looking and performing great for years to come. Each bumper incorporates a stand-alone Winch plate as the central backbone for the bumper and includes D-shackle mounts and tubular overrider to complete the package (d-rings not included). That Spartan Front Bumper is a direct bolt-on replacement for 2007-2018 Wrangler JK models and includes all the necessary hardware for a worry-free installation. The Spartan even utilizes the factory JK fog lights for a finished look without any extra expense. Best of all, it's backed by out industry leading 5 year limited warranty, making it the best built, budget-minded bumper on the market today. Patent Pending.

• Black Textured Powder Coat Finish Resists Rust And Corrosion
• Full Width Standard Ends Add An Aggressive Off-Road Look
• Incl. HD Winch Plate/D-Shackle Mounts/Stylized Overrider
• Direct Bolt-On Replacement/Maintains Factory Fog Lights
• Limited 5 Year Warranty

This Part Fits:

Xtreme Heavy Duty Tire Carrier Rear; Add On For Xtreme Heavy Duty Rear Bumper;

• Carry Up To a 35 in. Tire
• 5 x 4.5 Bolt Pattern
• Textured Black
• Modular Design
• Bolt-on

This Part Fits:

If you are going to larger tires and still want to use your stock spare tire carrier, you will find that your third brake light no longer fits. The Rugged Ridge third brake light extension kit solves this problem. By adding two inches, you elevate the third brake light easily over a 33-34 in. tire. Made from black powder coated steel, your light can be seen again with this easy to install spacer.

• Adjustable For 33 in. to 42 in. Tires
• Can Be Used w/Factory Tire Carrier
• Off-road Antenna Mount Included
• Uses factory 3rd break light
• Black Powder Coated

This Part Fits:

Make the most of your rear bumper with our XHD Rear Bumper System. Features easy installation, amazing looks and two reinforced heavy-duty D-ring attachment points. Special inner mounting plate provides an extremely secure mounting point - strong enough for off-road use! The two-piece design allows use with and without tire carrier option. Heavy-duty powder coated steel design looks great and is extremely tough. Mount the Tire Carrier to carry up to a 35 tire. For towing add the optional hitch part number 11580.03.

• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Textured Black
• Modular Design
• Steel

This Part Fits:

The Spartacus(TM) Front Bumper from Rugged Ridge(R) features a tough satin black powder-coated finish on a sturdy 11 gauge stamped steel construction. The stamping process allows for the most advanced styling on the market, creating a bumper lighter than most aftermarket steel bumpers and is designed to work with all popular Winch models (Winch plate coming soon). Uses factory tow hooks. US Patent No. D760,133, D775,013, D800,036 & D776,582

• Creates A Product Lighter Than Most Aftermarket Steel Bumpers
• Sturdy 11 Gauge Powder Coated Steel Construction
• Efficient Stamping Process Used
• Stamped Steel
• Bumper only
• Black

This Part Fits:

The Stamped Front Bumper from Rugged Ridge features a tough black powder-coated texture with a sturdy 11 gauge stamped steel construction. The stamping process used allows for the most advanced styling on the market, creating a bumper lighter than most aftermarket steel bumpers and is designed to work with all popular winch models. Uses factory tow hooks. Winch plate (11541.13) sold separately. US Patent No. D760,133, D775,013, D800,036/D776,582.

• Efficient stamping process used creates a product lighter than most aftermarket steel bumpers
• Creates A Product Lighter Than Most Aftermarket Steel Bumpers
• Sturdy 11 gauge powder coated steel construction
• Efficient Stamping Process Used
• Stamped Steel
• Bumper Only
• Black

This Part Fits:

This Rugged Ridge Winch Mount Plate for Wrangler JL models allows for the mounting of a Winch (up to 12,500 lbs. capacity) on factory Rubicon Steel Bumpers and Rugged Ridge Spartacus front bumpers. High-strength all- steel construction provides an unwavering foundation for mounting most brands of aftermarket w inches. Precision tooled for an exact fit and finished with a durable black powder-coated finish that looks great and stands the test of time. Includes Winch plate, brackets, hardware and instructions.

• Up To 12;500 LBS

This Part Fits:

Modeled after its XHD Modular Bumper System, Rugged Ridge set out to create an affordable, yet strong and functional bumper system for the budget-oriented consumer. Rugged Ridges All Terrain Modular Bumper System is constructed from durable black powder coated steel and is engineered to offer the highest levels of functionality. The All Terrain Modular Bumper can be customized to a Jeep owners specific needs by adding an all-new All Terrain Double X Striker and removable Winch plate cover both exclusive to the new bumper system. The optional Over-Rider and Stubby Ends will finish the modular bumper.

This Part Fits:

The XOR Rear Bumper is the first Rugged Ridge bumper purpose-built for extreme off-road duty, with all the style & sophistication of a battering ram. The foundation of the XOR Series is a body built from 5mm-thick steel plate, giving it unsurpassed structural rigidity. While the backbone of the XOR Series is anchored in strength and stability, the looks strive hard to steer away from subtle. The XOR's narrow profile, arching ends and integrated jack lifting points make it an obvious choice for any rig built for even occasional off-road use, while the bumper's intrinsic design makes it fully-functional for the street too, with bumper proximity sensor ports built right in. The XOR Rear Bumper even works with your factory trailer hitch, so towing is not a problem. Hardware is included for a pain-free installation on all 18-20 Wrangler JL models, with no cutting or drilling required.

• Massive 1-in. Thick Recovery Shackle Mounts
• High-Strength 5mm-Thick Steel Plate
• Compatible w/All Factory Equipment
• Limited 5-Year Warranty

This Part Fits:

The XOR Stubby Front Bumper is the first Rugged Ridge bumper purpose-built for extreme off-road duty, with all the style & sophistication of a battering ram. The foundation of the XOR Series is a body built from 5mm-thick steel plate, giving it unsurpassed structural rigidity and serving as the foundation for the integrated top-mount Winch plate. While the backbone of the XOR Series is anchored in strength and stability, the looks strive hard to steer away from subtle. With a 'stubby' profile that craves to crawl and a built-in 1-piece skid plate designed from steel plate that has been bent and formed, rather than boxed, to deliver critical protection while maximizing approach angles off-road. Accenting the XOR's exterior appearance are massive 1 in.-thick shackle mounts that accommodate ¾- in. shackles (not included) and recessed fog light pockets that accept standard OE fog lights (Does not work with Altitude or LED fog lights). Installation of the XOR Stubby Front Bumper is a direct bolt-on for 2018-2020 Wrangler JL and 2020 Gladiator JT models with all mounting hardware included and no drilling or cutting required.

• Massive 1-in. Thick Recovery Shackle Mounts
• High-Strength 5mm-Thick Steel Plate
• Compatible w/All Factory Equipment
• Limited 5-Year Warranty

This Part Fits:

Rugged Ridge HD Over-Rider Bar is an easy, bolt-on accent for any HD Stubby or Full Width front bumper. Built from high-strength tubular steel and designed to provide added protection for both radiator and grille while not impeding Winch access. Each HD Over-Rider is finished with a tough satin black powder coat finish and features concealed mounting hardware, creating the illusion of being forged from a single block of steel.

• Easy Bolt-On Installation w/Hidden Hardware For Clean Appearance
• Practical And Stylish Addition To Any HD Front Bumper
• Sturdy 2-Inch OD Tubular Steel Construction
• Adds Protection For Grille And Radiator
• Tough Satin Black Powder Coat Finish

This Part Fits:

Shift your HD Bumper into full-on trail attack mode with the Rugged Ridge HD X-Striker. It's a simple bolt-on addition to any HD Stubby or Full-Width Front Bumper that's guaranteed to help your Jeep rock a daring new look. With sturdy tubular steel construction, fully-welded seams, concealed hardware and a stunning satin black powder coat finish, it's a perfect styling statement that bolts on in minutes and leaves a lasting impression.

• Easy Bolt-On Installation w/Hidden Hardware For Clean Appearance
• Aggressive Addition For Any HD Front Bumper
• Sturdy 2-Inch OD Tubular Steel Construction
• Tough Satin Black Powder Coat Finish
• Limited 5-Year Warranty

This Part Fits:

Looking to add some versatility and style to your Jeep CJ or Wrangler? No other bumper can give your Jeep this many looks! This XHD front bumper kit includes the XHD front winch bumper, over rider hoop, and standard bumper ends, the perfect combination to personalize your custom bumper the way you like it. Features 4mm thick steel, factory fog light cut outs, and a powder-coated construction. These tough finishes will provide years of heavy-duty use. Patent Nos. 7,703,834; 8,393,656; 8,764,080

• Includes XHD front winch bumper, D-rings, Over Rider hoop, and standard bumper ends
• Incl. Over Rider Hoop And Standard Bumper Ends
• Modular design can be changed to your style
• Incl. XHD Frond Winch Bumper And D-Rings
• Textured Black
• Modular Design
• Steel

This Part Fits:

Make sure that your Jeep is as tough as any trail you're likely to tackle. Plastic bumpers might look good, but run into anything more than bug guts and you'll see why you need the strength of steel on your rig. That's why we recommend you keep the flimsy plastic in the picnic basket, not on your Jeep. Rugged Ridge HD Series Bumpers are trail-tested, proven designs that pack a serious punch. Whether you prefer the narrow, agile angles of our HD Stubby Front Bumper or the burly look of the Full-Width, you will love the aggressive off-road presence they provide. Engineered to mount most any aftermarket Winch for greater versatility and well-equipped to perform in the clutch with built-in jack lifting points at every corner and massive recovery hooks, each one dual-drilled to work with both ¾ and 7/8- in. shackles (shackles not included). We've even designed an HD Rear Bumper to go out back, for a highly-functional, total bumper package. Add a beautiful satin black powder coat finish and the confidence of our Limited 5 Year Warranty and the choice becomes clear. Rugged Ridge HD Bumpers are the best-built bumpers in their price class…or any class.

• Built-In Jack Lifting Points
• Limited 5 Year Warranty
• Massive Recovery Hooks
• Satin Black Finish

This Part Fits:

Make sure that your Jeep is as tough as any trail you're likely to tackle. Plastic bumpers might look good, but run into anything more than bug guts and you'll see why you need the strength of steel on your rig. That's why we recommend you keep the flimsy plastic in the picnic basket, not on your Jeep. Rugged Ridge HD Series Bumpers are trail-tested, proven designs that pack a serious punch. Whether you prefer the narrow, agile angles of our HD Stubby Front Bumper or the burly look of the Full-Width, you will love the aggressive off-road presence they provide. Engineered to mount most any aftermarket Winch for greater versatility and well-equipped to perform in the clutch with built-in jack lifting points at every corner and massive recovery hooks, each one dual-drilled to work with both ¾ and 7/8- in. shackles (shackles not included). We've even designed an HD Rear Bumper to go out back, for a highly-functional, total bumper package. Add a beautiful satin black powder coat finish and the confidence of our Limited 5 Year Warranty and the choice becomes clear. Rugged Ridge HD Bumpers are the best-built bumpers in their price class…or any class.

• Built-In Recessed Winch Plate Improves Airflow To Radiator
• High-Strength Steel Construction

This Part Fits:

Make sure that your Jeep is as tough as any trail you're likely to tackle. Plastic bumpers might look good, but run into anything more than bug guts and you'll see why you need the strength of steel on your rig. That's why we recommend you keep the flimsy plastic in the picnic basket, not on your Jeep. Rugged Ridge HD Series Bumpers are trail-tested, proven designs that pack a serious punch. Whether you prefer the narrow, agile angles of our HD Stubby Front Bumper or the burly look of the Full-Width, you will love the aggressive off-road presence they provide. Engineered to mount most any aftermarket Winch for greater versatility and well-equipped to perform in the clutch with built-in jack lifting points at every corner and massive recovery hooks, each one dual-drilled to work with both ¾ and 7/8- in. shackles (shackles not included). We've even designed an HD Rear Bumper to go out back, for a highly-functional, total bumper package. Add a beautiful satin black powder coat finish and the confidence of our Limited 5 Year Warranty and the choice becomes clear. Rugged Ridge HD Bumpers are the best-built bumpers in their price class…or any class.

• Built-In Recessed Winch Plate Improves Airflow To Radiator
• High-Strength Steel Construction

This Part Fits:

This pair of D-shackle brackets bolts onto XHD modular bumpers and allows you to attach D-shackles to the bumper base. Hardware included. D-shackles sold separately (Part # 11235.01)

• Limited 5 Year Warranty
• Textured Black
• Mounts Only
• Steel

This Part Fits:

Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice! Custom designed for your Wrangler, each component maximizes the over-sized look. All components are constructed of either strong textured black powder coated steel with a tough E-coat under coating or polished, no rust, prime 304 stainless for the ultimate look! These tough finishes will provide years of heavy-duty use. Matching rear bumpers are available for that complete look. This over rider hoop from provides a modular design and bolts with a direct fit onto the XHD front bumpers. Featuring a textured black powder coated finish, this hoop maximizes the oversized and off-road capable look of your Wrangler.

• Limited 5 Year Warranty
• Textured Black
• Modular Design
• 2.3 in. Tube
• Bolt-on

This Part Fits:

This Classic Rock Crawler rear bumper has a frame mounted platform that features a heavy duty grid like system with an over built steel design with raised sides for the ultimate protection and greatest ground clearance. All Classic rear bumpers feature a reinforced hitch box that is designed for offroad accessories (not designed for towing).

This Part Fits:

This stainless steel front frame cover was designed to protect your vehicles front end from small tree limbs and brush, this stylish addition to your factory front bumper or upgraded Rugged Ridge stainless front bumper will give you protection and style.

• Installs Directly Covering Factory Hinge w/Existing Hardware
• Limited 5 Year Warranty
• Weather Resistant
• Sold Individually
• Stainless Steel

This Part Fits:

Complete the look of your classic Jeep with these stainless steel bumperettes. Classic bumperettes have been a part of the signature Jeep styling for decades. Constructed of polished 304 stainless steel for long life, bumperettes will protect your vehicle from those minor bumps and scrapes. Sold as a pair. Includes all necessary mounting hardware.

• Limited 5 Year Warranty
• Weather Resistant
• Hardware Included
• Stainless Steel
• Pair

This Part Fits: