Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
193 products
193 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Introducing our rugged front bumper, constructed from 3/16? steel plate for exceptional durability. The bolt-on bull bar includes provisions for a 20" double row light bar or individual lights, offering versatile lighting options. This bumper can accommodate up to a 5500 lb winch, making it ideal for recovery operations. It features a bolt-on skid plate that accommodates O.E. plastic or most aftermarket skid plates, ensuring comprehensive protection. Integrated shackle recovery points provide additional functionality for off-road adventures. Finished with a durable two-stage light textured black powder coat, this bumper is built to withstand the toughest conditions. Backed by a 3-year finish warranty and a limited lifetime warranty, it guarantees long-lasting quality and performance. Perfect for those seeking both strength and versatility, this bumper is the ultimate upgrade for your vehicle.
- BOLT ON BULL BAR HAS PROVISIONS FOR 20" DOUBLE ROW LIGHT BAR OR INDIVIDUAL LIGHTS
- ACCOMODATES O.E.PLASTIC OR MOST AFTER MARKET SKID PLATES
- DURABLE 2-STAGE LIGHT TEXTURED BLACK POWDER COAT FINISH
- 3 YEAR FINISH / LIMITED LIFETIME WARRANTY
- CAN ACCOMMODATE UP TO 5500 LB WINCH
- INTEGRATED SHACKLE RECOVERY POINTS
- BOLT ON SKID PLATE INCLUDED
- 3/16" STEEL PLATE
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2023 | Subaru | Crosstrek | Base |
| 2019-2023 | Subaru | Crosstrek | Hybrid |
| 2018-2023 | Subaru | Crosstrek | Limited |
| 2018-2023 | Subaru | Crosstrek | Premium |
| 2021-2023 | Subaru | Crosstrek | Sport |
$673.00
Enhance your vehicle with our premium rear bumper, constructed from 3/16" steel plate for unmatched durability. The wrap-around design fits both factory and aftermarket flares, ensuring a seamless look. It includes a bolt-on license plate frame with a DOT-approved light for added safety and compliance. For those needing extra functionality, an optional tire carrier (5298) is available separately. This bumper retains your OEM tow hitch and accommodates rear parking sensors, providing convenience and enhanced safety. LED cube light cutouts are included for improved visibility during nighttime adventures. Finished with a two-stage powder coat in a light texture black, this bumper offers both style and long-lasting protection. Perfect for off-road enthusiasts and heavy-duty users, this bumper is designed to meet all your needs with reliability and flair.
Installation Instructions- Wrap Around Design Fits Both Factory and Aftermarket Flares
- Bolt On License Plate Frame With Dot Approved Light
- Two-Stage Powder Coat Light Texture Finish In Black
- Optional Tire Carrier 5298 Available Separately
- Accommodates Rear Parking Sensors
- 3/16 Steel Plate Construction
- Retains Orem Tow Hitch
- Led Cube Light Cutouts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2024 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2024 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2024 | Jeep | Wrangler | Rubicon 4xe |
| 2024 | Jeep | Wrangler | Rubicon X |
| 2024 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2024 | Jeep | Wrangler | Sahara |
| 2023-2024 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2024 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2024 | Jeep | Wrangler | Sport S |
| 2024 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2024 | Jeep | Wrangler | Willys |
| 2023-2024 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
Enhance your vehicle with our premium accessory, featuring a durable 1/8'' steel plate that retains the factory tow hitch for seamless integration. Designed with built-in step pockets, it provides easy access to your truck bed. This accessory is OE sensor compatible and includes light fitment for 4 cube LEDs, ensuring optimal functionality and safety. Upgrade your vehicle's performance and accessibility with this robust and versatile addition.
Installation Instructions- Built In Step Pockets For Easy Bed Access
- Retains Factory Tow Hitch
- Light Fitment: 4 Cube LED
- OE Sensor Compatible
- 1/8" Steel Plate
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2009-2013 | Chevrolet | Silverado 1500 | Hybrid |
| 2008-2013,2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2007-2018 | Chevrolet | Silverado 1500 | LT |
| 2007-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2007-2018 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2007-2018 | GMC | Sierra 1500 | Denali |
| 2009-2013 | GMC | Sierra 1500 | Hybrid |
| 2008-2013 | GMC | Sierra 1500 | SL |
| 2007-2018 | GMC | Sierra 1500 | SLE |
| 2007-2018 | GMC | Sierra 1500 | SLT |
| 2007-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
Introducing our premium front bumper, meticulously crafted from 3/16" and 1/4" cold roll steel for exceptional strength and durability. Designed for easy bolt-on installation, this bumper is OE sensor compatible, ensuring seamless integration with your vehicle's existing systems. It features two welded D-ring mounts for reliable recovery operations and is non-winch compatible, making it perfect for those who don't require winch functionality. The bumper is finished with a two-stage light texture in black, offering both style and long-lasting protection. For diesel engines, an intercooler shroud is required, while it remains optional for gas engines (PN: GM-5966). Light fitment options include a 30" dual row LED bar and 2 cube LEDs, providing excellent visibility during nighttime adventures. Ideal for off-road enthusiasts and heavy-duty users, this bumper is built to withstand the toughest conditions while providing a sleek and practical design.
Installation Instructions- Two-Stage Powder Coat Light Texture Finish In Black
- 3/16" and 1/4" Cold Roll Steel
- Easy Bolt On Installation
- Two Welded D-Ring Mounts
- Non-Winch Compatible
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2022 | Chevrolet | Silverado 1500 | Custom |
| 2019-2022 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2022 | Chevrolet | Silverado 1500 | High Country |
| 2019-2022 | Chevrolet | Silverado 1500 | LT |
| 2019-2022 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2022 | Chevrolet | Silverado 1500 | LTZ |
| 2019-2022 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2022 | Chevrolet | Silverado 1500 | WT |
| 2022 | Chevrolet | Silverado 1500 | ZR2 |
Elevate your vehicle's style and functionality with our premium accessory, crafted from a 1/8" thick steel plate that adds an aggressive look without adding unnecessary weight. Designed for easy bolt-on installation, this non-winch capable accessory is OE sensor compatible and includes a convenient license plate bracket. It also features light fitments for a 20" dual row LED in the middle and 4 cube LEDs, ensuring enhanced visibility and safety. Upgrade your vehicle with this stylish and practical addition.
Installation Instructions- Add Aggressive Style Without Weighing Down The Vehicle
- Light Fitment: 20" Dual Row LED Middle & 4 Cube LED's
- Includes License Plate Bracket
- Easy Bolt-On Installation
- 1/8" Thick Steel Plate
- OE Sensor Compatible
- Non-Winch Capable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2015 | Chevrolet | Silverado 1500 | High Country |
| 2015 | Chevrolet | Silverado 1500 | LS |
| 2014-2015 | Chevrolet | Silverado 1500 | LT |
| 2014-2015 | Chevrolet | Silverado 1500 | LTZ |
| 2015 | Chevrolet | Silverado 1500 | SSV |
| 2014-2015 | Chevrolet | Silverado 1500 | WT |
Introducing our latest product, designed with a sleek, modern aesthetic that offers ample clearance and seamlessly contours to follow your vehicle's body lines. The one-piece wrap-around design provides exceptional protection for your grille and headlights, while the 2" main tube and 1.25"-1.50" supporting tubes ensure robust durability. This product retains the factory camera and ACC, ensuring compatibility and convenience. The mesh screen allows maximum airflow, safeguarding vital components, and the integrated 2" receiver and shackle recovery mounts enhance functionality. It accommodates a 30" dual row LED bar and four cube LEDs for superior lighting. Crafted from durable 3/16" and 1/4" cold roll steel, it features an easy bolt-on installation process and a robust two-stage light texture black powder coat finish. With a three-year finish warranty and limited lifetime coverage, this product promises both style and reliability for your vehicle.
- MESH SCREEN ALLOWS MAXIMUN AIRFLOW WHILE PROTECTING VITAL COMPONENTS
- ONE-PIECE WRAP AROUND DESIGN PROTECTS GRILLE AND HEADLIGHTS
- DURABLE TWO-STAGE LIGHT TEXTURE BLACK POWDER COAT FINISH
- LIGHT FITMENT: 30" DUAL ROW LED BAR AND 4 CUBE LEDS
- INTEGRATED 2" RECEIVER AND SHACKLE RECOVERY MOUNTS
- 2" MAIN TUBE AND 1.25"-1.50" SUPPORTING TUBES
- SLEEK MODERN DESIGN WITH AMPLE CLEARANCE
- 3 YEAR FINISH / LIMITED LIFETIME
- CONTOURS AND FOLLOWS BODY LINES
- RETAINS FACTORY CAMERA AND ACC
- 3/16" AND 1/4" COLD ROLL STEEL
- EASY BOLT ON INSTALLATION
- NOT-WINCH COMPATIBLE
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020,2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2020,2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2020,2022 | Ford | F-250 Super Duty | Limited |
| 2017-2020,2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2020,2022 | Ford | F-250 Super Duty | XL |
| 2017-2020,2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$1,260.00
For a sleek and subtle look, hinge covers are included. Finished in a durable two-stage light texture black powder coat, these doors are sold in pairs and offer a stylish appearance. With a 3-year finish warranty and limited lifetime warranty, you can trust in their quality and longevity. Upgrade your vehicle with these high-quality trail doors and enjoy superior performance and comfort on all your journeys!
- LIGHT FITMENT: 18" SINGLE ROW OR 20" DOUBLE ROW LED BAR AND 2 CUBE LEDS
- DURABLE TWO-STAGE LIGHT TEXTURE BLACK POWDER COAT FINISH
- 12,000LBS WINCH CAPACITY (FITS MOST STANDARD WINCHES)
- INCLUDES BOTH LOW/HIGH PROFILE HOOP AND SKID PLATE
- NO NEED TO RELOCATE ACC OR BUY ADDITIONAL PARTS
- AGGRESSIVE STYLING WITH OPTIMUM FUNCTIONALITY
- OPTION TO USE WITH OR WITHOUT WINCH PLATE
- IMPROVES APPROACH AND DEPARTURE ANGLES
- EASY BOLT ON, NO DRILL INSTALLATION
- INTEGRATED SHACKLE RECOVERY MOUNTS
- 3 YEAR FINISH / LIMITED LIFETIME
- 3/16 AND 1/4 STEEL CONSTRUCTION
- WORKS WITH O.E. SENSORS
- 2-IN-1 STYLE BUMPER
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2022-2024 | Ford | Bronco | Raptor |
| 2021-2024 | Ford | Bronco | Wildtrak |
Introducing our sleek and modern front bumper, designed with ample clearance to enhance your vehicle's performance. This bumper contours and follows the body lines for a seamless look, featuring a one-piece wrap-around design that protects the grille and headlights. Constructed with a 2" main tube and 1.25"-1.50" supporting tubes, it ensures robust protection. The mesh screen allows maximum airflow while safeguarding vital components. Integrated 2" receiver and shackle recovery mounts provide reliable recovery options. Light fitment includes a 30" dual row LED bar and 2 cube LEDs, ensuring excellent visibility in all conditions. OE sensor compatible, it includes a skid plate for added protection. Made from 3/16" and 1/4" cold roll steel, this bumper is non-winch compatible and features easy bolt-on installation. Finished with a durable two-stage light texture black powder coat, it offers long-lasting protection and a sleek appearance. Backed by a 3-year finish warranty and a limited lifetime warranty, this bumper is perfect for those seeking a combination of style, strength, and practicality.
- MESH SCREEN ALLOWS MAXIMUN AIRFLOW WHILE PROTECTING VITAL COMPONENTS
- ONE-PIECE WRAP AROUND DESIGN PROTECTS GRILLE AND HEADLIGHTS
- DURABLE TWO-STAGE LIGHT TEXTURE BLACK POWDER COAT FINISH
- LIGHT FITMENT: 30" DUAL ROW LED BAR AND 2 CUBE LEDS
- INTEGRATED 2" RECEIVER AND SHACKLE RECOVERY MOUNTS
- 2" MAIN TUBE AND 1.25"-1.50" SUPPORTING TUBES
- SLEEK MODERN DESIGN WITH AMPLE CLEARANCE
- CONTOURS AND FOLLOWS BODDY LINES
- 3 YEAR FINISH / LIMITED LIFETIME
- 3/16" AND 1/4" COLD ROLL STEEL
- EASY BOLT ON INSTALLATION
- OE SENSOR COMPATIBLE
- NOT-WINCH COMPATIBLE
- INCLUDES SKID PLATE
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2024 | Ram | 2500 | Big Horn |
| 2019-2024 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2024 | Ram | 2500 | Limited |
| 2021-2024 | Ram | 2500 | Limited Longhorn |
| 2019-2024 | Ram | 2500 | Lone Star |
| 2019-2024 | Ram | 2500 | Power Wagon |
| 2023-2024 | Ram | 2500 | Rebel |
| 2024 | Ram | 2500 | Special Service |
| 2019-2024 | Ram | 2500 | Tradesman |
| 2019-2024 | Ram | 3500 | Big Horn |
| 2019-2024 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2024 | Ram | 3500 | Limited |
| 2021-2024 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024 | Ram | 3500 | Special Service |
| 2019-2024 | Ram | 3500 | Tradesman |
Introducing our latest product, designed with a sleek, modern aesthetic that offers ample clearance and seamlessly contours to follow your vehicle's body lines. The one-piece wrap-around design provides exceptional protection for your grille and headlights, while the 2" main tube and 1.25"-1.50" supporting tubes ensure robust durability. The mesh screen allows maximum airflow, safeguarding vital components, and the integrated 2" receiver and shackle recovery mounts enhance functionality. This product accommodates a 30" dual row LED bar and two cube LEDs for superior lighting. It is OE sensor compatible and includes a skid plate for added protection. Crafted from durable 3/16" and 1/4" cold roll steel, it features an easy bolt-on installation process and a robust two-stage light texture black powder coat finish. With a three-year finish warranty and limited lifetime coverage, this product promises both style and reliability for your vehicle.
- MESH SCREEN ALLOWS MAXIMUN AIRFLOW WHILE PROTECTING VITAL COMPONENTS
- ONE-PIECE WRAP AROUND DESIGN PROTECTS GRILLE AND HEADLIGHTS
- DURABLE TWO-STAGE LIGHT TEXTURE BLACK POWDER COAT FINISH
- LIGHT FITMENT: 30" DUAL ROW LED BAR AND 2 CUBE LEDS
- INTEGRATED 2" RECEIVER AND SHACKLE RECOVERY MOUNTS
- 2" MAIN TUBE AND 1.25"-1.50" SUPPORTING TUBES
- SLEEK MODERN DESIGN WITH AMPLE CLEARANCE
- CONTOURS AND FOLLOWS BODDY LINES
- 3 YEAR FINISH / LIMITED LIFETIME
- 3/16" AND 1/4" COLD ROLL STEEL
- EASY BOLT ON INSTALLATION
- OE SENSOR COMPATIBLE
- INCLUDES SKID PLATE
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Dodge | Ram 2500 | Laramie |
| 2010 | Dodge | Ram 2500 | Power Wagon |
| 2010 | Dodge | Ram 2500 | SLT |
| 2010 | Dodge | Ram 2500 | ST |
| 2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2010 | Dodge | Ram 3500 | Laramie |
| 2010 | Dodge | Ram 3500 | SLT |
| 2010 | Dodge | Ram 3500 | ST |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2011-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2018 | Ram | 2500 | Power Wagon |
| 2011-2018 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2011-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2011-2018 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$439.99
$1,299.99
$1,090.00
Vehicle-specific fitting kit required to mount ARB Bumper to the vehicle chassis. This fitting kit has been specially designed to work with this vehicle's safety systems.
WarrantyInstallation Instructions
- Includes all hardware to mount bumper
- Vehicle-specific Design
- Bumper Mount Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Toyota | Tacoma | Limited |
| 2025 | Toyota | Tacoma | SR |
| 2024-2025 | Toyota | Tacoma | SR5 |
| 2024-2025 | Toyota | Tacoma | Trailhunter |
| 2024-2025 | Toyota | Tacoma | TRD Off-Road |
| 2024-2025 | Toyota | Tacoma | TRD Pro |
| 2024-2025 | Toyota | Tacoma | TRD Sport |
$1,299.95
Combining functionality, strength and protection, ARB offers a rear bumper for the Ford Bronco (wide fender flares) that retains OE tow bar and wiring. The rear bumper includes two jack points and incorporates twin chassis-mounted rated recovery points. To complement the ARB Bronco protection equipment range, the bumper is finished in Integrit textured black powder coat.
WarrantyInstallation Instructions
- Twin jack points located in outer wings suit ARB Jack or mechanical jacks
- Vintage silver center panel houses the two central sensors and OE tow bar
- Vehicle-specific designs suit Ford Bronco wide fender flares
- Durable steel construction delivers maximum protection
- Zinc rich primer for additional corrosion resistance
- Compatible with rear parking sensors and OE tow bar
- Finished in Integrit black textured powder coat
- License plate relocated to spare wheel
- LED license plate included in kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
$798.00
Combining functionality, strength and protection, ARB offers a rear bumper for the Ford Bronco (wide fender flares) that retains OE tow bar and wiring. The rear bumper includes two jack points and incorporates twin chassis-mounted rated recovery points. To complement the ARB Bronco protection equipment range, the bumper is finished in Integrit(TM) textured black powder coat.
WarrantyInstallation Instructions
- Twin jack points located in outer wings suit ARB Jack or mechanical jacks
- Vintage silver center panel houses the two central sensors and OE tow bar
- Vehicle-specific designs suit Ford Bronco wide fender flares
- Center Panel Houses The Two Central Sensors And OE Tow Bar
- Durable steel construction delivers maximum protection
- Zinc rich primer for additional corrosion resistance
- Compatible with rear parking sensors and OE tow bar
- Finished in Integrit black textured powder coat
- License plate relocated to spare wheel
- LED license plate included in kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
$1,095.95
The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.
WarrantyInstallation Instructions
- Vehicle-specific design ensures excellent ground clearance and departure angles
- Provides greatly improved protection, versatility and vehicle access
- Facilitates easy access to both the roof and inside of the vehicle
- Center recess to accommodate various sized tires
- Manufactured From Steel For Maximum Strength
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Jeep | Wrangler | 65th Anniversary Edition |
| 1987-1993 | Jeep | Wrangler | Base |
| 1988-1992 | Jeep | Wrangler | Islander |
| 1987-1990 | Jeep | Wrangler | Laredo |
| 1991-1994 | Jeep | Wrangler | Renegade |
| 1995 | Jeep | Wrangler | Rio Grande |
| 2003-2006 | Jeep | Wrangler | Rubicon |
| 1988,1991-1994 | Jeep | Wrangler | S |
| 1988-1995,1997-2004 | Jeep | Wrangler | Sahara |
| 1994-1995,1997-2006 | Jeep | Wrangler | SE |
| 1987-1988,1997-2006 | Jeep | Wrangler | Sport |
| 2004-2006 | Jeep | Wrangler | Unlimited |
| 2005-2006 | Jeep | Wrangler | Unlimited Rubicon |
| 2002-2006 | Jeep | Wrangler | X |
$1,195.95
The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.
WarrantyInstallation Instructions
- Vehicle-specific design ensures excellent ground clearance and departure angles
- Combines Rear Vehicle Protection with Towing
- Manufactured from steel for maximum strength
- Suitable for Vehicles without Sensors
- Integrated Tow Hitch
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
$994.11
The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.
Installation InstructionsWarranty
Installation Instructions
- Vehicle-specific design ensures excellent ground clearance and departure angles
- Manufactured From Steel For Maximum Strength
- Combines Rear Vehicle Protection with Towing
- Suitable for Vehicles without Sensors
- Integrated Tow Hitch
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
$2,295.95
The Summit Rear Bumper combines class-leading design, proven ARB engineering and a no-compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bumper includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring. With four easily accessible ARB Jack and Hi-Lift jack points, the Summit rear bumper is ready for the most demanding off-road use.
WarrantyInstallation Instructions
- Rear bumper only, must be installed with either wheel carriers, jerry can holder or cover panels (sold separately)
- Vehicle-specific design ensures excellent ground clearance and departure angles
- Manufactured From Steel For Maximum Strength
- Combines Rear Vehicle Protection with Towing
- Suitable for Vehicles without Sensors
- Integrated Tow Hitch
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1998-2007 | Toyota | Land Cruiser | Base |
$885.95
Bridging functionality and style, ARB’s Zenith Bumper turns heads whilst providing your vehicle with ARB’s industry-leading protection and performance. The Zenith is constructed from laser-cut and formed durable steel, finished with ecoat, meta prep and satin black powder coat for ultimate corrosion resistance. Extensive design work has been undertaken to maximize strength and aesthetics in this new low profile design bumper. Engineers have integrated twin 17,637lbs (8t) rated recovery points into the Zenith bar making it an complete solution. The forged recovery points are shaped and formed to protect soft shackles and prevent point load on steel bow shackles, solving an common issue. The Zenith boasts integrated front bash plates which, along with the wings and pans of the bumper to provide protection to vulnerable vehicle components. Functionally was top of mind when designing the Zenith, ensuring powertrain performance is not affected with the design ensuring maximum air flow to critical cooling systems. OEM fog lamps are utilized via dual apertures and the radar has been relocated, where required. Finally, the integrated winch cradle is compatible with most low mount winches up to 12,000lbs.
WarrantyInstallation Instructions
- Made from durable laser cut and formed 3mm steel for maximum strength-to-weight ratio, the Zenith is meta prep primed, and powder coated in an satin finish for corrosion resistance
- Twin recessed recovery jack points on the front of the bumper to ensure safe and secure locations to perform an recovery. Compatible with ARB Jack and traditional farm jacks.
- Two 8T rated recovery points, engineered and integrated into the bumper, rated to 17,637lbs (8T) and finished in red powder coat
- Bash plates included, with one heavy forged center piece and additional side bash plates for added protection on rugged terrain
- A removable center grille allows for the install of up to seven 4in pod lights or lightbars up to 30in
- Built-in winch cradle, the Zenith bumper is compatible with most low mount winches up to 12,000lbs
- Compatible with factory Radar ADAS, Parking Sensors, and Airbag systems
- Compatible with OE fog lights (on applicable models)
- Slimline design profile, with minimal front overhang
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Toyota | Tacoma | Limited |
| 2025 | Toyota | Tacoma | SR |
| 2024-2025 | Toyota | Tacoma | SR5 |
| 2024-2025 | Toyota | Tacoma | Trailhunter |
| 2024-2025 | Toyota | Tacoma | TRD Off-Road |
| 2024-2025 | Toyota | Tacoma | TRD Pro |
| 2024-2025 | Toyota | Tacoma | TRD Sport |
$289.99
The DV8 Offroad Dana 44 Rear Differential Skid Plate for the Wrangler JK protects the rear diff housing and pinion from rock impacts and helps prevent diff cover leaks on the trail. It uses seven mounting points for a secure fit and includes a paintable aluminum logo plate. Finished in a micro-texture black powder coat and designed for simple bolt-on installation.
Installation Instructions- Prevent rear diff leaking from rock scraps (the pressure of the rocks scraping will actually pull back the diff cover allowing oil to leak)
- Pinion skid plate to prevent you from getting hung up on those pesky rocks
- Paintable aluminum logo plate to match your other accessories
- (7) Mounting locations for added durability with off-roading
- Will not work with aftermarket diff covers
- Micro-Texture Black Powder Coat Finish
- Bolt-on installation
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2018 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2018 | Jeep | Wrangler | Sport |
| 2016,2018 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2018 | Jeep | Wrangler | Unlimited Moab |
| 2007-2018 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2018 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2018 | Jeep | Wrangler | Unlimited Sport |
| 2016,2018 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
$79.99
The DV8 Offroad Jeep Wrangler JK Rear Shock & Link Skid Plates provide bolt-on protection for the factory rear shock and link mounts. Their single-piece design reinforces the thin OE brackets and prevents damage from rocks and obstacles on the trail. These skids install easily, sit at the lowest point of the rear axle to help the Jeep slide over terrain, and work with most aftermarket shocks & lift kits. Piggyback shocks with fixed lower reservoirs are not compatible. Finished in a micro-texture black powder coat for durability.
Installation Instructions- Places a skid plate on the lowest part of the rear axles for better off-roading capabilities. Won't get caught on rocks, and will slide right off.
- Shock and link mount skids are a single piece, unlike some competitors who tie the two mounts together for strength.
- Will work with most aftermarket shocks (Piggyback reservoirs that are locked on the bottom will not fit)
- Will work with lift kits and aftermarket links using Johnny Joints and Heim connections.
- Protects your links and shock mounts from smashing into rocks.
- 100% bolt-on application. Super easy install.
- Reinforces the thin factory shock mounts.
- Micro-Texture Black Powder Coat Finish
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2018 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2018 | Jeep | Wrangler | Sport |
| 2016,2018 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2018 | Jeep | Wrangler | Unlimited Moab |
| 2007-2018 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2018 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2018 | Jeep | Wrangler | Unlimited Sport |
| 2016,2018 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
$999.99
The MTO Series Rear Bumper for the Tundra features a mid-width design with a simple bolt-on installation. Two 3-inch light pods can be mounted behind aluminum accent panels for supplemental rear lighting. There are 2 clevis mounts that take ?-inch D-rings to provide recovery options if needed. Our design retains full functionality of the back-up sensors and the license plate light. There are inset mounting points for installing the OEM reverse lights. The MTO is compatible with the blind spot monitoring sensors, keeping the feature fully functional.
Catalog- Light mounting options for (2) 3" pods for additional lighting on the trail. (Behind Mesh)
- Optional Grip-Tape included for extra grip when bumper is wet or muddy.
- Retains the use of factory sensors and license plate/reverse lights.
- Contains paintable mesh inserts to accent the vehicle.
- Compatible with blind spot monitoring equipment
- Welded-in zip tie tabs for wire management.
- Bolt-on design (No cutting required)
- Sleek and tough Mid-width design.
- Provides (2) 3/4" D-ring Mounts.
- Factory Hitch Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$899.99
This DV8 Offroad Toyota Tundra rear bumper is designed to fit 07-13 Tundras. DV8 truck bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas which allows them to take a beating. Can accommodate up to a 12,500 lbs. winch. We also use a 2 step powder coating process which first coats the bumper with a thick layer of a proprietary compound for corrosion resistance. DV8 then coats the bumper with their textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Details: Comes with D-Rings, Powdercoated, Easy installation, Accommodates Lights, Retains factory hitch receiver, Sold As: Each, Lights Not Included.
Catalog- Includes (2) 3" Round Led Lights
- Includes Side Step Cut Outs
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2013 | Toyota | Tundra | Limited |
| 2010-2013 | Toyota | Tundra | Platinum |
| 2007-2011 | Toyota | Tundra | SR5 |
$999.99
Our MTO Series Tacoma Rear Bumper was designed as a direct replacement to the factory bumper, with no cutting or modification required for installation. It brings the addition of 2 reinforced clevis mounts that take 3/4-inch D-rings, providing you with recovery options. A 3-inch light pod can be mounted behind the aluminum mesh panels towards each end of the bumper. ?At each corner of the bumper is a side step, for convenience in accessing the truck bed. The MTO is compatible with factory rear parking sensors and retains full functionality. The blind spot detection module does not function with this bumper.
Installation Instructions- Compatible With or Without Factory Hitch & Trailer Plug
- Side Steps at the Corners and Center of the Bumper?
- Side Steps at the Corners and Center of the Bumper
- Retains Factory Backup Sensors Functionality?
- Retains Factory Backup Sensors Functionality
- Installs to Factory Bumper Mounting Points?
- Retains OEM License Plate Mounts & Lights?
- Retains OEM License Plate Mounts & Lights
- Micro Texture Black Powder Coat Finish?
- Micro Texture Black Powder Coat Finish
- Light Mounts for Two 3" Light Pods?
- Light Mounts for Two 3 Light Pods
- Paintable Aluminum Mesh Panels?
- Paintable Aluminum Mesh Panels
- Two 3/4" D-Ring Mounts?
- Two D-Ring Mounts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
$799.99
This Made To Overland Series Rear Bumper was designed for heavy off-road use, and is compatible with our TCJL-13 Bumper Mounted MTO Tire Carrier (Available December 2023). The bumper features a full-width design with tapered wings compatible with factory or aftermarket fenders. The OEM spare tire mount can fit up to a 37-inch spare tire. The MTO retains use of the factory hitch & harness, and features sensor cutouts to retain full functionality of parking sensors. Two 3-inch light pods can be mounted behind the perforated aluminum accent panels. The bumper also has (2) 1-inch thick clevis mounts compatible with ?-inch D-ring shackles. A license plate bracket with an included light relocates your license plate away from the spare tire area to keep it visible when running a spare. On the interior of the bumper are welded zip-tie tabs for clean wire management. This features a fully bolt-on installation with no modifications required.
Catalog- Full Width Design that matches well with factory and aftermarket fenders
- Compatible with TCJL-13 bumper mounted tire carrier (to be released)
- Retains Factory Parking Sensors (recommend using MPRSNSR-01)
- Includes License Plate Relocation and License Plate Light
- Can Fit Up to a 37" Tall Tire With Factory Wheels/Mount
- Welded-in Zip Tie Tabs For Clean Wire Management
- Minor Wiring Required for License Plate Light
- Provides Mounts for (2) 3" Light Pods
- Compatible With Factory Hitch
- 1" Thick D-Ring Mounts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$749.99
Our FS-7 Series Rear Bumper features a sleek, mid-width design. The FS-7 can fit up to a 37-inch spare tire above the bumper using the factory carrier. The bumper includes a license plate bracket with a license plate light to relocate the plate over to the side away from your spare tire. A pair of 1-inch thick reinforced mounts for D-ring shackles provide recovery options. Rear lighting options include (2) 3-inch pod light mounts that sit in a shielded position behind perforated aluminum accent panels. Welded zip tie tabs provide clean wire management.
Catalog- Can Fit Up to a 37 Tall Tire With Factory Wheels Using the Factory Spare Tire Mount.
- Works With Factory Rear Bumper Sensors (recommend using MPRSNSR-01)
- Includes License Plate Relocation and License Plate Light
- Provides (2) 1" thick D-ring mounts for 7/8 shackle pin.
- Welded-in Zip Tie Tabs For Clean Wire Management
- Provides mounting options for (2) 3 pod lights.
- Micro-Texture Black Powder Coat
- Compatible With Factory Hitch
- Sleek Mid-Width Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$749.99
Our FS-15 Rear Bumper features a low profile design suited for aggressive rock crawling. The bumper includes a license plate relocation bracket with a license plate light. The factory hitch and harness fit perfectly in an accessible position beneath the FS-15. For models equipped with factory sensors, we included sensor cutouts to retain full functionality of the feature. For models without factory sensors, we include sensor hole plugs for a clean look. Up to a 37-inch spare tire will fit on the OEM carrier above the bumper.
Catalog- Works with factory rear bumper sensors (recommend using MPRSNSR-01)
- Includes License Plate Relocation and License Plate Light
- Provides (2) 1" thick D-ring mounts for 7/8" shackle pin.
- High Clearance Design For Aggressive Rock Crawling
- Welded-in Zip Tie Tabs For Clean Wire Management
- Micro-Texture Black Powder Coat
- Compatible With Factory Hitch
- Direct Fit/ Bolt On Design
- Aluminum backed logo
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$749.99
Introducing the new Spec Series line of bumpers from DV8 Offroad. This high clearance Jeep Rear Bumper was designed for aggressive rock crawling. It was designed with an ultra-low profile that offers rear end protection and a multi-faceted, stylish look. Two clevis mounts that take D-ring shackles provide recovery options. Towards either end of the bumper are mounting points for a 3-inch light pod for supplemental trail lighting.
Catalog- Includes License Plate Relocation Bracket & Plate Light
- Accepts (2) 3" Pod Lights For Supplemental Lighting
- High Clearance Design For Aggressive Rock Crawling
- Welded-in Zip Tie Tabs For Clean Wire Management
- Micro-Texture Black Powder Coat Finish
- Retains Back-Up Sensor Functionality
- Clevis Mounts for D-Ring Shackles
- Direct Fit Bolt-On Installation
- Satin Black Accent Panel
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$1,099.99
The bumper works with single or dual-tip exhaust, supports 4- and 6-sensor models, and reuses factory license plate lights. It includes mounts for two 3" pod lights, welded zip tie tabs for wire management, a CNC-cut logo, and a durable micro-texture black powder coat finish.
Installation Instructions- If the vehicle is equipped with backup sensors, we recommend purchasing DV8 Part # MPRSNSR-01 sensor bezels for ease of installation.
- Light mounting options for (2) 3" pods for rear facing lighting on the trail
- Full width design for protection and full coverage off-road
- Utilizes factory sensors and license plate lights
- Welded-in zip tie tabs for easy wire management
- Micro-Texture black powder coat finish
- Bolt-on design (No cutting required)
- Satin black aluminum accent plates
- Factory hitch compatible
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2019-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
$1,099.99
The bumper includes mounting provisions for two 3" rear-facing pod lights and welded-in zip tie tabs for clean wire management. It remains fully compatible with the factory hitch, OEM parking sensors, license plate lights, and Blind Spot Monitoring systems. Block-off plates are included for vehicles not equipped with BSM.
Installation Instructions- Blind Spot Monitoring compatible (block-off plates included if vehicle is not equipped)
- Light mounting options for (2) 3" pods for rear facing lighting on the trail
- Full width design for protection and full coverage off-road
- Utilizes factory sensors and license plate lights
- Welded-in zip tie tabs for easy wire management
- Micro-Texture black powder coat finish
- Bolt-on design (No cutting required)
- Satin black aluminum accent plates
- Factory hitch compatible
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2023 | Chevrolet | Silverado 2500 HD | Custom |
| 2020-2023 | Chevrolet | Silverado 2500 HD | High Country |
| 2020-2023 | Chevrolet | Silverado 2500 HD | LT |
| 2020-2023 | Chevrolet | Silverado 2500 HD | LTZ |
| 2020-2023 | Chevrolet | Silverado 2500 HD | WT |
| 2020-2023 | GMC | Sierra 3500 HD | AT4 |
| 2020-2021 | GMC | Sierra 3500 HD | Base |
| 2020-2023 | GMC | Sierra 3500 HD | Denali |
| 2022-2023 | GMC | Sierra 3500 HD | Pro |
| 2020-2023 | GMC | Sierra 3500 HD | SLE |
| 2020-2023 | GMC | Sierra 3500 HD | SLT |
Showing 120/193
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.