Fits 2010-2024 Toyota 4Runner models including SR5, Limited, Trail, TRD Pro, TRD Off-Road, Venture, and TRD Sport.

Standard rubber bushings deflect under load and degrade over time, leading to sloppy handling and increased body roll. Energy Suspension Hyper-Flex polyurethane rear sway bar bushings provide a more rigid mounting point for the sway bar, allowing the suspension system to work more effectively. This upgrade restores steering response and helps maintain flatter cornering without the high cost of replacing the entire sway bar.

• Manufactured from proprietary Hyper-Flex polyurethane for superior longevity compared to OEM rubber
• Resistant to road contaminants, oils, and grease that typically rot factory bushings
• Increases sway bar efficiency by reducing deflection at the mounting points
• Inside Diameter: 20mm
• Color: Red
• Manufacturer Part Number: 8.5158R

Fits 2010-2024 Toyota 4Runner models including SR5, Limited, TRD Pro, TRD Off-Road, and Trail.

Energy Suspension Hyper-Flex polyurethane sway bar bushings provide a significant upgrade over factory rubber components that are prone to cracking, rotting, and excessive deflection. By replacing soft OE bushings, this set ensures your sway bar system operates at maximum efficiency, reducing body roll and improving steering response during cornering or when navigating uneven terrain.

Engineered for durability, these bushings are resistant to road oils, salts, and contaminants that typically degrade rubber. This kit is a cost-effective way to restore suspension feel and maintain precise alignment of the front sway bar, especially on vehicles equipped with heavy aftermarket accessories or off-road setups.

• Replaces soft OEM rubber bushings for improved handling
• Material: Hyper-Flex™ Polyurethane
• Finish: Red
• Resistant to road contaminants and ozone
• Direct fit for factory front sway bar mounts
• Manufacturer Part Number: 8.5157R

Fits 2005-2007 Scion tC Base and Spec models.

Energy Suspension front sway bar bushings are engineered to maximize the effectiveness of your vehicle's stabilizer system. By replacing soft, compliant factory rubber with high-durometer Hyper-Flex™ polyurethane, these bushings eliminate the delay in sway bar engagement caused by compression. This allows the bar to function at 100% efficiency, significantly sharpening steering response and reducing body roll during cornering.

The Hyper-Flex™ polyurethane construction provides a much longer service life than OEM rubber, as it is highly resistant to automotive fluids, road salt, and environmental degradation. These 21mm bushings are designed for straightforward installation as a direct replacement for the factory units.

• Fits 21mm diameter front sway bars
• Manufactured from proprietary Hyper-Flex™ polyurethane
• Resists oil, grease, and ozone better than rubber
• Red finish for a performance aesthetic
• Manufacturer Part Number: 8.5131R

Fits 1991-1997 Toyota Land Cruiser Base models.

Restore suspension geometry and eliminate axle wander on your FJ80 with the Energy Suspension Hyper-Flex Rear Control Arm Bushing Set. These black polyurethane bushings replace soft, degraded factory rubber to maintain precise alignment under the extreme stresses of off-road articulation or heavy street use. The full-floating, non-binding design allows for smoother suspension travel without the stiction associated with worn OE components.

Energy Suspension's proprietary Hyper-Flex polyurethane is formulated to resist environmental contaminants such as oil, salt, and road grime that typically cause rubber to rot and crack. By reducing bushing deflection, this set improves overall vehicle handling, cornering predictability, and stability in both on-road and off-road environments.

• Hyper-Flex performance polyurethane construction for maximum durability
• Maintains better rear axle alignment during articulation and cornering
• Full-floating design ensures efficient, non-binding operation
• Resistant to oils, grease, and environmental breakdown
• Direct replacement for factory control arm bushings (MPN: 8.3138G)

Fits 2000-2006 Toyota Tundra Base, Limited, and SR5.

Restore rear suspension stability and eliminate the slop caused by degraded factory rubber with the Energy Suspension 8.2118R Leaf Spring Bushing Set. Original equipment rubber bushings often deteriorate over time due to road debris, chemical exposure, and heavy use, leading to excessive deflection that compromises vehicle control. This set uses Energy's proprietary Hyper-Flex polyurethane to provide a more rigid, durable interface between the leaf springs and the chassis.

The Hyper-Flex material is specifically formulated to resist common contaminants like oils and road salt while maintaining its shape under load. This ensures your Tundra stays composed during cornering, heavy braking, and standing-start accelerations. Designed as a direct-fit upgrade, these red bushings are built to outlast traditional rubber components by five to ten times while significantly improving overall suspension performance and alignment.

• High-performance Hyper-Flex performance polyurethane construction
• Maintains proper suspension geometry and reduces deflection
• Resistant to oils, road chemicals, and atmospheric rot
• Red finish for easy identification
• Manufacturer Part Number: 8.2118R

Fits 1995-2000 Toyota Tacoma Base, Limited, Pre Runner, and SR5 models.

Restore handling precision and eliminate the excessive component deflection caused by worn-out factory rubber with the Energy Suspension Hyper-Flex Master Bushing Set. This comprehensive kit replaces critical suspension and chassis bushings with high-performance polyurethane, providing the necessary firmness to maintain proper caster and camber alignment under load. Whether you are navigating technical off-road trails or improving daily drivability, these components reduce wheel hop during acceleration and enhance braking control by stabilizing the suspension geometry.

The proprietary Hyper-Flex polyurethane formula is engineered for extreme longevity. Unlike OEM rubber, which rots and cracks over time, these bushings are impervious to undercar chemicals like oils and coolants and withstand atmospheric pollutants and UV exposure. This kit (8.18104R) is a cost-effective performance upgrade that provides more consistent feedback and better stability for the life of your vehicle.

• Part Number: 8.18104R
• Material: Hyper-Flex Performance Polyurethane
• Color: Red
• Maintains proper caster and camber alignment
• Resistant to road salt, oils, and UV degradation
• Reduces wheel hop and improves braking stability
• Made in the USA

Fits select 2011-2018 Ram 1500 Extended and Crew Cab models (including Big Horn, Laramie, Rebel, and Tradesman).

Over time, original rubber body mounts degrade due to ozone, road salts, and vehicle fluids, leading to cab-to-bed misalignment and excessive chassis noise. Energy Suspension body mounts are engineered to replace these worn-out factory components with Hyper-Flex polyurethane, a material that maintains its shape and performance far longer than rubber. These mounts provide the structural rigidity needed to keep your truck's cab properly aligned while remaining compliant enough for comfortable street use, avoiding the harshness associated with solid aluminum mounts.

• Replaces distorted and crushed factory rubber mounts to restore proper body-to-frame alignment
• Hyper-Flex polyurethane construction offers superior resistance to oils, chemicals, and road grime
• Engineered for a balance of durability and ride quality suitable for both street and off-road use
• Select applications include zinc-plated steel rings molded into the bushings for maximum durability
• Maintains critical cab and bed clearance to prevent body panel contact
• Manufacturer Part Number: 5.4117R

Fits select 2005-2015 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum. These rear subframe bushings are engineered to replace soft factory rubber mounts that degrade over time, leading to excessive subframe movement and poor alignment stability.

Energy Suspension's proprietary Hyper-Flex polyurethane formula provides the necessary rigidity to keep the rear subframe properly indexed to the chassis. This firm foundation significantly reduces wheel hop during hard acceleration and maintains precise caster and camber settings during aggressive cornering. Unlike rubber, these polyurethane components resist damage from road salt, oils, and atmospheric ozone, ensuring long-term suspension stability and improved braking response.

• Replaces compliant OE rubber bushings to stabilize the rear subframe
• Significantly reduces wheel hop for improved traction and acceleration
• Maintains critical suspension geometry and alignment settings
• Manufactured from Hyper-Flex polyurethane for superior durability
• Resistant to automotive fluids and road contaminants
• Color: Red
• Manufacturer Part Number: 5.4114R

Fits 1971-1989 Dodge D100, D200, D300, W100, W200, W300, and RD200 trucks.

Over time, original rubber body mounts degrade, crack, and compress, leading to noticeable cab-to-bed misalignment and sagging ride height. Energy Suspension replaces these soft OE components with their proprietary Hyper-Flex polyurethane cab and body mounts. These bushings provide a critical performance middle ground, offering more durability than rubber without the harsh vibration associated with solid aluminum mounts.

These polyurethane mounts are specifically formulated to resist automotive fluids, road salt, and ozone—contaminants that typically destroy factory rubber. By maintaining proper cab and body positioning, these mounts help preserve the structural integrity of your truck while ensuring a smoother ride than worn-out or solid alternatives.

• Manufactured from high-grade Hyper-Flex polyurethane for long-term durability
• Restores factory ride height and critical cab-to-bed alignment
• Includes zinc-plated steel rings molded into the mounts for added structural reinforcement
• Resistant to oils, coolants, and environmental degradation
• Replaces distorted or missing factory rubber mounting hardware
• Manufacturer Part Number: 5.4101R

Fits 1989-1997 Ford Thunderbird and 1999-2004 Ford Mustang SVT Cobra (V8-4.6L / V6-3.8L / 5.0L).

Maintain proper drivetrain alignment and reduce unwanted wheel hop with these Energy Suspension differential carrier bushings. Factory rubber bushings are prone to excessive deflection and eventual failure, leading to erratic handling and drivetrain lash. These replacements are engineered from proprietary Hyper-Flex polyurethane, providing a firmer mounting point for the differential housing to ensure more efficient power transfer to the wheels without the extreme NVH associated with solid metal mounts.

• Replaces soft OE rubber to minimize differential movement and improve throttle response
• Constructed from proprietary Hyper-Flex polyurethane for long-lasting durability
• Resistant to road grime, salts, oils, and environmental breakdown
• Precision-molded for a direct fit in the factory carrier mounting locations
• Manufacturer Part Number: 4.1126R
• Color: Red

Fits select 1987-2006 Jeep Cherokee, Wrangler, Comanche, and Wagoneer.

Standard rubber motor mounts are often too soft for performance applications and can degrade quickly when exposed to engine heat and under-vehicle fluids. Energy Suspension Hyper-Flex polyurethane motor mounts provide a durable, torque-resistant solution that stabilizes engine movement without the harshness of solid metal mounts. Designed for both street and competition use, these mounts feature a safety interlock design to maintain component integrity under heavy load.

• Manufactured from Hyper-Flex performance polyurethane for superior longevity compared to OEM rubber.
• Features a torque-resistant safety interlock design for high-strength engine retention.
• Resistant to engine oil, coolants, and road contaminants that typically degrade rubber bushings.
• Maintains proper drivetrain alignment and improves power transfer by reducing engine twist.
• Includes two red motor mounts (2-piece set).
• Manufacturer Part Number: 2.1104R

Fits 2005-2009 Subaru Legacy and Outback models across all trims including GT, i, R, and XT.

Energy Suspension Hyper-Flex performance polyurethane bushings replace the soft factory rubber units that frequently deflect under load, causing inconsistent alignment and unpredictable handling. These rear control arm bushings are engineered to be full-floating and non-binding, allowing the suspension to articulate smoothly through its travel while maintaining precise geometry. This upgrade is essential for drivers looking to restore steering response and stabilize the rear end during aggressive cornering or heavy loading on the street, track, or off-road.

• Manufactured from Energy Suspension’s proprietary Hyper-Flex polyurethane for maximum durability
• Maintains proper suspension alignment under extreme driving conditions
• Full-floating design prevents binding for more efficient suspension operation
• Resistant to oils, road salts, and ozone that degrade standard rubber components
• Reduces unwanted suspension deflection and improves overall vehicle control
• Includes necessary bushings for the rear control arms
• Manufacturer Part Number: 19.3105R

Fits 2006-2011 Honda Civic Si.

The Energy Suspension Hyper-Flex Master Bushing Set replaces soft, compliant factory rubber with high-performance polyurethane to restore chassis precision and improve suspension stability. Over time, original rubber components deteriorate from UV exposure, road grime, and engine fluids, leading to sloppy handling and unpredictable alignment shifts. This comprehensive kit (MPN 16.18114R) provides a cost-effective way to upgrade your vehicle's entire suspension feel.

By maintaining proper caster and camber alignment during hard cornering and braking, these Hyper-Flex bushings provide a significant increase in driver control. The stiffer polyurethane construction also helps reduce wheel hop during quick acceleration, ensuring power is delivered to the ground more efficiently without the deflection common in worn OE bushings.

• Constructed from proprietary Hyper-Flex performance polyurethane
• Superior resistance to oils, coolants, and atmospheric pollutants
• Maintains consistent alignment geometry under heavy load
• Significantly reduces wheel hop and improves braking stability
• Outlasts standard rubber components by up to 5 to 1
• Proudly Made in the USA
• Manufacturer Part Number: 16.18114R

Fits 1993-1998 Toyota T100 models, including Base, DLX, DX, One-Ton, and SR5.

Restore proper cab-to-bed alignment and maintain ride height on your T100 with the Energy Suspension Hyper-Flex body cab mount set. Original rubber mounts are prone to cracking, crushing, and distorting over time, which compromises vehicle geometry and comfort. These mounts are engineered from a specially formulated polyurethane that provides the durability required for demanding road conditions without the harsh vibrations associated with solid aluminum mounts.

• Manufactured from proprietary Hyper-Flex polyurethane for long-lasting performance
• Maintains critical cab-to-bed alignment and factory ride height
• Engineered to be stronger than original rubber mounts while remaining street-friendly
• Resistant to road oils, chemicals, and atmospheric ozone
• Zinc-plated steel rings are molded into the mounts where required for maximum durability
• Ideal for replacing worn, crushed, or missing factory body mounts

Fits 2000-2005 Toyota Celica (GT/GTS).

Replace soft, worn-out rubber factory bushings with the Energy Suspension Hyper-Flex polyurethane front control arm bushing set to restore steering precision and handling stability. Unlike standard rubber that deflects under load, these polyurethane bushings maintain proper suspension geometry and alignment during aggressive cornering, heavy braking, and daily driving. The full-floating, non-binding design ensures smooth suspension articulation for improved overall vehicle control.

• Manufactured from Energy Suspension's proprietary Hyper-Flex polyurethane for maximum durability
• Resistant to road salt, oil, and other common automotive contaminants that degrade rubber
• Improves cornering, handling, and alignment retention under extreme conditions
• Engineered for the street, track, or off-road use
• Includes black polyurethane bushings; installation requires reusing existing factory metal hardware
• Manufacturer Part Type: Front Control Arm Bushing Set

The Torque Solution Solid Billet Differential Bushing Kit is designed to eliminate the excessive movement and deflection associated with factory rubber bushings. By replacing the compliant OEM units with solid mounts, this kit ensures the differential remains properly aligned under heavy torque loads, significantly reducing wheel hop and improving power delivery to the ground.

Ideal for drag racing, drifting, or dedicated track use, these bushings are CNC machined from high-grade billet material for maximum durability. This kit provides a direct-fit solution that removes drivetrain slop, providing a more connected and responsive feel during aggressive driving maneuvers.

• Direct replacement for factory rubber differential bushings
• Eliminates differential movement and wind-up
• Reduces wheel hop for improved traction and launches
• CNC machined solid billet construction
• Fits Toyota GR Supra MKV A90/A91 and BMW Z4 G29 models

Fits 1981-1989 Toyota Land Cruiser Base models.

Restore steering precision and suspension stability to your classic Toyota with the Energy Suspension Hyper-Flex front leaf spring bushing set. Factory rubber bushings are prone to cracking and compression set over time, which causes axle wander and unpredictable handling. This kit replaces those soft components with high-performance polyurethane, designed to maintain proper suspension geometry and eliminate the slop inherent in aged rubber.

Engineered from Energy Suspension's proprietary Hyper-Flex material, these bushings are built to withstand the rigors of both off-road articulation and highway driving. They are resistant to road contaminants that typically degrade rubber, such as oils, grease, and ozone, offering a service life significantly longer than OE replacements.

• Direct replacement for factory front leaf spring bushings
• Manufactured from Hyper-Flex polyurethane for 5-10x the life of rubber
• Improves chassis control during cornering, braking, and acceleration
• Maintains consistent spring alignment under heavy load
• Color: Black
• Manufacturer Part Number: 8.2106G

Fits select 1998-2011 Ford Ranger and 1998-2009 Mazda B-Series pickup trucks including B2300, B2500, B3000, and B4000.

The Energy Suspension Hyper-Flex polyurethane front sway bar bushing set is engineered to replace soft, worn-out factory rubber bushings. Unlike rubber, which deflects under load and degrades over time from exposure to road salt, oils, and environmental factors, Hyper-Flex polyurethane remains firm. This ensures your front sway bar functions at peak efficiency, significantly reducing body roll and improving steering response during cornering and sudden maneuvers.

• Material: Hyper-Flex Polyurethane
• Bar Diameter: 27mm
• Color: Black
• Part Number: 4.5156G
• Replaces prone-to-fail OEM rubber bushings
• Maintains better alignment of the sway bar for consistent handling
• Resistant to automotive fluids and road contaminants

Fits select 2007-2020 Cadillac Escalade, Chevrolet Silverado/Suburban, and GMC Sierra/Yukon XL 1500 models equipped with a 34mm front sway bar.

Replace compliant factory rubber bushings with Energy Suspension's Hyper-Flex polyurethane to restore and improve your vehicle's handling. As a sway bar works by twisting, the soft OE rubber often compresses before the bar can even begin to resist body roll. These high-durometer polyurethane bushings provide a more stable mounting point, allowing the sway bar to react immediately and work at its maximum efficiency.

Designed as a direct-fit replacement for the 34mm front bar, this set is engineered to withstand the oils, road salt, and ozone that typically destroy standard rubber. The result is a more predictable steering response and a significant reduction in body roll during cornering or heavy load transitions.

• Fits 34mm (1.33in) diameter front sway bars
• Manufactured from proprietary Hyper-Flex polyurethane for maximum durability
• Resistant to automotive fluids and road contaminants
• Improves steering feel and reduces body roll
• Color: Black

Fits 1997-2006 Jeep Wrangler TJ including Sport, Sahara, Rubicon, SE, X, and Unlimited models.

Restore steering precision and suspension geometry with the Energy Suspension Hyper-Flex front control arm bushing set. These bushings are engineered to replace soft, factory rubber that prone to cracking and deflection under load. By utilizing a high-performance polyurethane compound, these bushings maintain proper alignment settings during articulation and cornering on the street or the trail.

Designed for a full-floating operation, these bushings reduce friction and prevent binding for smoother suspension travel. This specific kit requires the technician to reuse the existing factory outer metal shells during installation. The black polyurethane material is resistant to road salt, oil, and atmospheric ozone, ensuring a significantly longer service life than OEM rubber components.

• Manufacturer Part Number: 2.3106G
• Material: Hyper-Flex Polyurethane (Black)
• Configuration: Front control arm bushings
• Design: Full-floating, non-binding for efficient operation
• Installation Note: Must reuse original factory outer metal shells
• Maintenance: Greaseable for longevity and quiet operation

Fits select 1992-2000 Honda Civic and 1993-1997 Honda Civic del Sol models with manual transmissions. These Energy Suspension Hyper-Flex motor mount inserts provide a significant upgrade over factory rubber mounts by filling the voids in the original mounting points.

Constructed from proprietary Hyper-Flex polyurethane, these inserts are engineered to eliminate excessive engine movement and wheel hop, resulting in more efficient power transfer to the wheels and crisper throttle response. Unlike OEM rubber that degrades over time when exposed to heat and chemicals, these polyurethane inserts are resistant to oil, coolants, and road contaminants, ensuring long-term durability for both street and competition use.

• Part Type: Motor Mount Inserts
• Material: Hyper-Flex™ Performance Polyurethane
• Finish: Red
• Application: Manual Transmission only
• Prevents tearing of original soft mount material
• Resistant to under-vehicle fluids and road grime
• Manufacturer Part Number: 16.1105R

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring).

Upgrade your vehicle's handling and suspension response with this Energy Suspension Rear Sway Bar Bushing Set. These 16mm bushings are engineered to replace soft, worn-out OEM rubber components that tend to distort and crack over time. By utilizing Hyper-Flex polyurethane, these bushings provide the necessary stiffness to allow your sway bar system to operate at maximum efficiency, effectively improving cornering stability and reducing body roll.

The Hyper-Flex polyurethane construction is resistant to under-car contaminants like oil, road salt, and ozone, ensuring a significantly longer service life than standard rubber. This set is a direct fit for the factory 16mm rear sway bar, providing a cost-effective performance boost that delivers sharper steering feedback and more predictable chassis behavior.

• Bore Diameter: 16mm
• Position: Rear
• Material: Hyper-Flex Polyurethane
• Color: Black
• Increased durability over factory rubber bushings
• Maintains proper sway bar alignment for improved handling

Fits 1997-2013 Chevrolet Corvette C5 and C6, including Base, Z06, Grand Sport, 427, and special editions.

Eliminate wheel hop and improve cornering consistency with the BMR Suspension Rear Upper and Lower Control Arm Bearing Kit (CBK557). Factory rubber bushings are designed for NVH reduction but often suffer from excessive deflection during hard acceleration and high-G cornering. This movement alters suspension geometry, leading to unpredictable handling and lost traction.

Built for maximum effort street performance, drag racing, and track applications, this kit replaces compliant OE rubber with heavy-duty spherical bearings. This upgrade ensures the rear control arms move strictly through their intended travel arc, providing precise suspension articulation without the binding or deflection found in rubber or polyurethane alternatives.

• Fits all 1997-2013 Chevrolet Corvette C5 and C6 models
• Eliminates rear control arm bushing deflection
• Reduces wheel hop and improves launch stability
• Ideal for street, drag, and road course use
• Black finish for a clean, durable appearance
• Includes bearings for both upper and lower rear control arms
• Manufacturer Part Number: CBK557

Fits select 2010-2024 Toyota 4Runner and 2010-2023 Lexus GX460 models equipped with the Kinetic Dynamic Suspension System (KDSS).

Sway bar mount bushings are critical components for maintaining body control and suspension alignment. Factory rubber bushings are prone to compression and tearing over time, especially in heavy-duty off-road or towing applications. This degradation leads to a loose, sloppy feeling in the chassis and reduces the effectiveness of your sway bar. SuperPro sway bar mount bushings are engineered to replace these worn components with a high-performance alternative that restores steering response and handling precision.

These bushings are specifically designed to integrate with your vehicle's OEM hardware and mounting brackets, ensuring a precise fit without the need for universal adapters. Each bushing features internal grease retention technology—a series of molded grooves designed to trap lubricant and ensure a lifetime of silent, smooth operation. This design eliminates the need for frequent re-greasing and provides a durable, one-time upgrade for your suspension system.

• Manufacturer Part Number: SPF5727-30K
• Bore Diameter: 30mm
• Position: Rear
• Specifically designed for KDSS-equipped vehicles
• Engineered for use with factory mounting hardware
• Internal grease retention grooves for silent operation
• High-durability polyurethane construction resists oil and road grime

Fits 2005-2021 Nissan Frontier and 2009-2012 Suzuki Equator.

Suspension upgrades often overlook the rear spring shackles and fixed pins, but these components are critical for maintaining rear axle alignment. Factory shackles and pins are prone to corrosion, which eventually destroys the leaf spring bushings. When these bushings fail, the solid rear axle can shift, causing passive rear-end steer, road wandering, and instability under heavy braking or while towing.

The SuperPro KIT141SK Rear Greasable Shackle and Bushing Kit provides a comprehensive solution. By replacing worn OE hardware with heavy-duty greaseable shackles and high-performance bushings, you ensure the rear end stays stabilized regardless of the load or terrain. The greaseable design allows for easy maintenance, preventing the binding and squeaking common with corroded factory hardware.

• Stabilizes rear axle to eliminate passive steer and vehicle wandering
• Greasable shackle and pin design for extended service life and simplified maintenance
• Improves handling and stability when carrying heavy loads or towing trailers
• Replaces corroded factory hardware that destroys leaf spring bushings
• Includes greaseable shackles, fixed pins, and a complete bushing kit
• Manufacturer Part Number: KIT141SK

Fits 1976-1979 Jeep CJ5 and CJ7.

Restore chassis stability and correct body alignment with the Whiteline W93540 Body Mount Bushing Set. Over years of use, factory rubber mounts deteriorate due to exposure and mechanical stress, leading to body sag and increased NVH (noise, vibration, and harshness). These Whiteline bushings are engineered from a high-grade synthetic elastomer that offers superior abrasion resistance and high load-bearing capacity, making them ideal for 4WD applications, towing, and off-road use.

• Corrosion Resistance: All metal components feature protective plating that acts as a hard skin, outperforming conventional paint in harsh environments.
• Advanced Formulation: Resistant to oil, grease, ozone, and weathering for long-term service life.
• High Load Design: Specially bonded construction provides the tensile strength required for heavy-duty 4WD use while maintaining necessary flexibility.
• Direct Replacement: Designed for a straightforward installation to factory mounting points; includes a detailed installation guide.
• MPN: W93540

Fits 1995-2000 Toyota Tacoma Base, Limited, Pre Runner, and SR5.

Original equipment (OE) steering rack bushings are prone to degradation from engine bay contaminants like oil and grease, as well as the increased loading caused by wider wheels and aggressive alignment geometry. This Whiteline Steering Rack Bushing Kit (W13398) is engineered to replace worn factory rubber with a more durable synthetic elastomer, restoring steering precision and providing significantly better feedback through the wheel.

• Enhanced Precision: Engineered to eliminate steering rack play and improve overall vehicle handling and feedback.
• Advanced Material: Formulated to resist oil, grease, ozone, and environmental weathering for a longer service life than rubber.
• Corrosion Protection: Metal components feature protective plating to withstand harsh undercar conditions and resist rust.
• Installer Friendly: Designed to be a direct replacement for OE bushings, reducing the need for specialized shop tools during installation.
• Manufacturer Part Number: W13398

Fits select 2013-2026 Subaru BRZ, Scion FR-S, Toyota 86, and Toyota GR86.

The Whiteline KCA434 Anti-Dive/Caster Kit is engineered to increase positive caster and optimize front anti-dive geometry. By replacing the factory control arm lower inner front bushings with low-compliance synthetic elastomer, this kit minimizes dynamic caster loss during heavy braking and aggressive cornering. The result is sharper turn-in response, increased directional stability, and more consistent alignment angles for a maximized tire contact patch.

Built for durability in high-load applications, these bushings feature a specially bonded design and internal grease reservoirs for self-lubrication. The metal components are protected by a combination of powder coating, protective plating, and anodized finishes to resist corrosion and wear in harsh environmental conditions.

• Optimized Geometry: Increases caster and reduces front-end lift and dive under load.
• Synthetic Elastomer: Proprietary formulation resistant to oil, grease, ozone, and weathering.
• Constant Lubrication: Internal grease reservoirs and supplied molybdenum disulphide (LM) grease manage friction and extend component life.
• Corrosion Resistance: Protective plating and anodized alloy materials ensure longevity against road debris and chemicals.
• Manufacturer Part Number: KCA434

Vehicle Fitment

Fits select 2013-2020 Lexus GS F, GS200t, GS300, GS350, and GS450h.

Control arm bushings serve as the critical pivot points for your vehicle's suspension. Worn factory bushings allow for significant deflection, leading to vague steering response, irregular tire wear, and a diminished driving experience. These issues are often exacerbated in vehicles equipped with larger wheels, grippy tires, or upgraded braking systems. The SuperPro SPF4327K kit replaces these soft or failed components with high-performance polyurethane for sharper handling and long-term reliability.

SuperPro bushings are engineered and manufactured in Australia using a proprietary, engineering-grade polyurethane formula. Unlike standard rubber, this material is unaffected by oils, water, or extreme temperatures, ensuring the suspension geometry remains consistent under load. Despite the increased durability, SuperPro designs focus on maintaining OEM-level noise, vibration, and harshness (NVH) isolation, making this kit ideal for both daily commutes and spirited driving.

• Eliminates suspension slop and improves steering precision
• Constructed from proprietary engineering-grade polyurethane
• Resistant to extreme temperatures, oils, and coolants
• Maintains factory levels of cabin comfort and isolation
• Designed, engineered, and manufactured in Australia
• Includes Manufacturer Part Number: SPF4327K
• Limited Lifetime Warranty

Fits select 2007-2019 Toyota Camry and Toyota Highlander (including Hybrid and AWD models).

The SuperPro SPF3880K Rear Lower Forward Lateral Arm Outer Bushing Kit is engineered to address the instability and alignment drift often caused by worn or degraded factory rubber bushings. This kit provides a more precise connection point for the rear lateral arm, ensuring your vehicle maintains correct suspension geometry under load. By replacing these outer bushings, you restore steering precision and prevent excessive tire wear caused by dynamic toe changes in the rear suspension.

• Manufacturer Part Number: SPF3880K
• Placement: Rear Lower Forward Lateral Arm (Outer Position)
• Durability: Built with advanced materials to resist environmental degradation and performance-robbing deformation.
• Stability: Enhances lateral control and improves overall handling predictability.
• Fitment: Precision-engineered for a direct-fit replacement of OE components.

This kit is an essential upgrade or replacement for high-mileage vehicles where factory bushings have softened, leading to a "floaty" rear-end feel or alignment issues that cannot be corrected by standard adjustments.