Fits 2021-2023 Ford Bronco models, including Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, and Heritage Edition.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit is a premier suspension upgrade engineered to enhance the ride quality and off-road capability of the 2021-2023 Ford Bronco. These 2.5-inch diameter coilovers provide significantly more piston area and oil volume than stock shocks, ensuring consistent damping and superior heat management during high-speed desert transit or technical crawling. The adjustable ride height allows for 3-4 inches of front lift on non-Sasquatch models and 2-3 inches of lift on Sasquatch-equipped Broncos, accommodating larger tire fitments and improving approach angles.

• Adjustable lift height: 3-4" (non-Sasquatch) or 2-3" (Sasquatch)
• Delivers up to 11.5 inches of total wheel travel
• Large 2.5-inch shock bodies with corrosion-resistant CAD plating
• Heavy-duty 7/8-inch diameter induction hardened, chrome plated shafts
• 6061 aircraft-grade aluminum CNC-machined components
• FK rod end bearings for reduced deflection and extended service life
• High-strength alloy CNC-machined lower bar pin
• 100% bolt-on installation; no drilling, cutting, or welding required
• Fully rebuildable and re-tunable for custom performance
• Manufacturer Part Number: 48600

Fits 2019-2023 Ram 1500 Big Horn, HFE, Laramie, Longhorn, Limited, Lone Star, Rebel, Special Service, and Tradesman.

ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are engineered to significantly improve the front-end damping and vehicle control of 2019-2023 Ram 1500 trucks. These 100% bolt-on coilovers provide 2-3 inches of lift height adjustability, allowing for the installation of larger wheel and tire combinations while maintaining a sport-tuned feel on and off-road. The internal reservoir (IR) 2.5-inch shock body features an increased piston area over stock components to maximize wheel travel and heat dissipation across varying terrain.

Built for durability, these coilovers utilize a corrosion-resistant CAD-plated shock body with a 7/8-inch diameter shaft and 6061 aircraft-grade aluminum CNC-machined components. The lower mounting clevis is made from high-strength alloy for maximum reliability. When paired with ICON rear shocks, this system delivers balanced vehicle control for a superior driving experience.

• 2-3" adjustable front lift height
• 2.5" shock body with 7/8" diameter shaft
• Corrosion-resistant CAD plated shock body
• FK rod end bearings for minimal deflection and long life
• High-strength alloy CNC-machined lower mounting clevis
• 6061 Aircraft grade aluminum CNC-machined components
• 100% Bolt-on installation; no drilling or cutting required
• ICON-engineered coil springs
• MPN: 211010

Fits select 2009-2022 Dodge/Ram 1500 and 1500 Classic models (4WD/2WD depending on year).

The ICON Vehicle Dynamics Vehicle Specific (V.S.) 2.5 Series IR (Internal Reservoir) coilover kit is engineered to provide a significant upgrade in damping performance and ride quality for both on-road and off-road environments. These 2.5-inch diameter coilovers feature application-specific valving and increased oil capacity to manage heat more effectively than factory shocks. The adjustable threaded body allows for fine-tuning of front ride height to accommodate larger tires and level out the vehicle stance.

• Adjustable front lift height: 0.75-2.5" for 2009-2018 models; 0-1.5" for 2019-2022 models.
• Large 2.5-inch diameter CAD-plated shock body for maximum corrosion resistance and durability.
• Heavy-duty 7/8-inch diameter induction-hardened, chrome-plated shock shaft.
• Fully rebuildable and revalveable design ensures a lifetime of service.
• ICON-engineered coil springs guaranteed for life against sagging or breakage.
• Bolt-in installation uses factory mounting locations; no cutting or welding required.
• Vehicle-specific valving for superior low-speed control and reduced body roll.

The kit comes complete with everything needed for installation, including two pre-assembled coilovers and necessary hardware. Manufacturer Part Number: 211000.

Fits 2022-2024 Honda Civic Type R (FL5).

The HKS HIPERMAX R (MPN 80310-AH005C) is a track-focused coilover system engineered specifically for the FL5 Honda Civic Type R. This "Full Kit" provides a comprehensive suspension overhaul, transitioning the vehicle from the factory adaptive dampers to a precision-tuned, adjustable coilover setup designed for maximum cornering performance and high-speed stability.

Removing the factory Electronic Control Suspension (ECS) on the FL5 typically triggers a dashboard error light. This kit includes the HKS Error Canceller, ensuring a seamless installation that maintains proper vehicle communication without interference. Built with the durability and performance characteristics of the HIPERMAX series, this system is optimized for drivers who demand more feedback and adjustment than the stock dampers can provide.

• Manufacturer Part Number: 80310-AH005C
• Includes specialized HKS Error Canceller kit to bypass factory electronic damper warnings
• Full coilover assembly for independent height and damping adjustment
• Optimized spring rates and damping profiles for the FL5 chassis
• Direct replacement for factory struts and shocks

Fits 1998-2005 Toyota Altezza and Lexus IS300 (SXE10 chassis).

The HKS HIPERMAX S series represents the pinnacle of street performance suspension, evolving from the legendary MAX IV GT to provide even greater ride comfort and handling precision. This full coilover kit (MPN: 80300-AT006) is engineered specifically for the SXE10 chassis, utilizing advanced damping technology to eliminate harshness while maintaining the communicative feedback enthusiasts demand during spirited driving.

• Dual PVS (Pre-load Valve System): Refines damping force at low piston speeds for improved stability and a smoother ride over minor road imperfections.
• WR Needle: Offers a wider range of damping adjustment, allowing you to fine-tune the suspension for various driving conditions.
• Advanced Bump Stop Rubber: Provides a more natural, progressive feel at the limit of suspension travel.
• High-Strength Cold-Wound Springs: Ensures consistent performance and prevents sagging over time.
• Manufacturer Part Number: 80300-AT006

Each kit includes complete front and rear assemblies with pre-set spring rates and damping profiles optimized for the IS300/Altezza platform, along with all necessary adjustment wrenches and hardware for a bolt-on installation.

Fits 1989-1994 Nissan Skyline GT-R (BNR32).

The HKS HIPERMAX S (80300-AN008) represents the evolution of performance suspension, replacing the renowned MAX IV GT series with enhanced damping control and ride quality. Engineered for the Nissan Skyline GT-R BNR32, this full kit balances aggressive handling with the refinement needed for street driving. It features the advanced Pre-load Valve System (PVS), which helps eliminate harsh high-speed vibrations while maintaining firm body control during cornering.

Built with durability in mind, the HIPERMAX S utilizes a specialized bump rubber design to manage bottoming-out forces and a Dual PVS system to ensure consistent tire contact. The 30-level damping adjustment allows drivers to fine-tune the suspension to their specific environment, whether it's a weekend mountain run or daily commuting.

• Dual PVS (Pre-load Valve System): Improves damping response at both low and high piston speeds.
• WR (Wide Range) Needle: Offers 30 levels of precise damping adjustment.
• Optimized Bump Rubber: Provides a smoother transition under full suspension compression.
• Superior Finishing: Features high-strength cold-wound springs and corrosion-resistant coating for longevity.
• Direct Fitment: Designed as a complete replacement for the OE struts and springs.
• Manufacturer Part Number: 80300-AN008

Fits select 2000-2004 Subaru Impreza WRX STI models (GDB Applied A-D). This HKS HIPERMAX S Full Kit (80300-AF002) is the successor to the MAX IV GT series, re-engineered to provide the ultimate balance of handling and ride comfort for the GD-chassis STI.

• Dual PVS (Pre-load Valve System): Enhances damping force at low piston speeds for improved tire contact and stability over uneven surfaces.
• WR (Wide Range) Needle: Features 30 levels of damping adjustment with an expanded tuning range to suit both street and occasional track use.
• Single Tube Damper: Ensures consistent performance and superior heat dissipation compared to twin-tube designs.
• PNE Coating: Applied to the height-adjustment threads to provide high-level corrosion resistance and prevent seizing.
• Strengthened Rubber or Pillow Ball Mounts: Optimized for the GDB chassis to maintain precise alignment and steering response.

The kit includes a full set of four dampers and springs, adjustment wrenches, and installation hardware to replace the factory struts with a high-performance single-tube solution.

Fits 2018-2020 Volkswagen Atlas 4Motion (AWD) models including Launch Edition, S, SE, SEL, and R-Line trims (2.0T).

The H&R Street Performance Raising Coil Over system is the premier suspension solution for drivers seeking increased ground clearance without compromising ride comfort. Unlike traditional lowering kits, this raising coilover system is engineered to provide a taller stance for better terrain navigation while maintaining excellent handling characteristics for daily use. Each shock is custom-valved to work specifically with H&R precision-engineered progressive rate springs, creating a balanced and finely tuned suspension profile.

Designed for durability and precision, the fully threaded shock bodies allow for finite ride height adjustments. This allows you to balance vehicle weight effectively, improving performance, control, and aesthetics. All H&R coilover components are manufactured to the highest standards to ensure long-term reliability and a factory-like fit.

• Fits 2018-2020 Volkswagen Atlas with 4Motion AWD (2.0T)
• Custom-valved dampers for superior handling and ride comfort
• Progressive rate springs for adaptive response across varying surfaces
• Fully threaded shock bodies for precise height adjustability
• Engineered and manufactured in Germany
• Manufacturer Part Number: 54797

Fits select 2005-2014 Ford Mustang models, including Base, GT, Bullitt, Shelby GT, Shelby GT500, and Shelby GT500KR.

H&R Street Performance Coil Overs (MPN 51656) are engineered for drivers who require a balance of aggressive handling and street-ready comfort. Each kit features custom-valved dampers matched specifically to precision-engineered progressive rate springs, ensuring a finely tuned suspension response across various driving conditions.

The fully threaded shock bodies allow for individual height adjustment, enabling you to lower the vehicle's center of gravity and improve overall stability and cornering control. Designed and manufactured in Germany to exacting standards, these coilovers provide a significant upgrade over factory suspension components.

• Custom-valved shocks designed for progressive rate springs
• Fully threaded shock bodies for precise height adjustability
• Engineered to improve handling while maintaining ride comfort
• High-quality construction made in Germany
• Direct fitment for S197 Mustang chassis
• Manufacturer Part Number: 51656

Fits select 1985-1998 Volkswagen Golf and Jetta models.

H&R Ultra Low Coil Overs are engineered for the dedicated enthusiast seeking extreme lowering and a show-ready stance. This kit provides a significant drop in ride height, far exceeding standard performance suspension limits. As a Tuner Fitment application, these coilovers are designed for builders familiar with the specialized chassis dynamics and modifications required for ultra-lowered vehicles.

When installing this kit, be prepared to address wheel and tire clearance, potential fender liner removal, and suspension geometry adjustments. This precision-engineered system delivers the aggressive look required for show vehicles while maintaining the build quality H&R is known for.

• Extreme lowering for show vehicle aesthetics and a low center of gravity
• Precision-valved shocks and progressive rate springs for maximum lowering
• Tuner Fitment: Requires expert installation and potential body modifications
• High-quality construction made in Germany
• Manufacturer Part Number: 50865-2

Fits select 1980-1988 Volkswagen Jetta, Rabbit, and Scirocco.

The H&R Ultra Low Coil Over kit (MPN: 50819-1) is engineered specifically for show-car enthusiasts seeking extreme lowering that surpasses standard coilover kits. Designed and manufactured in Germany, these coilovers provide the aggressive stance required for high-level show vehicles while maintaining H&R's signature engineering standards and build quality.

Tuner Fitment Requirements: This kit is designated as a Tuner Fitment product, intended for builders familiar with the chassis dynamics of ultra-lowered vehicles. Proper installation and clearance may require specialized modifications, including trimming fender wells, removing fender liners, negative camber adjustments, and the use of specific wheel and tire combinations.

• Designed for extreme lowering and show-vehicle aesthetics
• Precision-engineered dampers and high-tensile spring rates
• Height adjustable for fine-tuning vehicle stance
• Manufactured in Germany to rigorous quality standards
• Manufacturer Part Number: 50819-1

Fits 2008-2009 Pontiac G8 (Base, GT, and GXP).

H&R Street Performance Coil Overs are engineered for drivers who demand improved handling and a lower center of gravity without sacrificing ride quality. Each coilover kit features custom-valved shocks paired with precision-engineered progressive rate springs to create a suspension system specifically tuned for the Pontiac G8 chassis.

The fully threaded shock bodies allow for precise vehicle height adjustments, enabling you to fine-tune the stance and improve cornering performance and control. These kits are manufactured in Germany to exacting standards to ensure long-term durability and consistent damping performance under various driving conditions.

• Custom-valved dampers and progressive rate springs
• Fully threaded shock bodies for adjustable ride height
• Improved handling and reduced body roll
• Lowers center of gravity for better weight distribution
• High-quality construction made in Germany
• Manufacturer Part Number: 50751

Fits select 2017-2020 Audi A4, S4, A5, and S5 models (without Magnetic Ride Control).

H&R Street Performance Coil Overs are engineered for drivers who demand better handling and a lower center of gravity without sacrificing ride comfort. Each kit features custom-valved shocks specifically paired with precision-engineered progressive rate springs to provide a finely tuned suspension system. The fully threaded shock bodies allow for precise vehicle height adjustments, helping you balance vehicle weight and achieve the perfect stance for your Audi.

• Fully threaded shock body for adjustable ride height
• Custom-valved dampers and progressive rate springs for superb comfort
• Lower center of gravity for improved cornering and control
• Manufactured in Germany to rigorous quality standards
• Designed for vehicles without Magnetic Ride Control (MRC)
• Manufacturer Part Number: 50356-2

Fits select 2017-2020 Audi A4, A4 allroad, A4 Quattro, A5 Quattro, A5 Sportback, S4, S5, and S5 Sportback models produced before July 11, 2016 and not equipped with Magnetic Ride Control (MRC).

H&R Street Performance Coil Overs are engineered for drivers who demand improved handling without sacrificing ride comfort. Each kit features custom-valved shocks paired with precision-engineered progressive rate springs to create a suspension system tuned for the street. The fully threaded shock bodies allow for precise vehicle height adjustment, enabling you to lower the center of gravity and balance vehicle weight for better cornering performance and control.

• Fully height-adjustable threaded shock bodies
• Custom valving for a balance of performance and comfort
• Progressive rate springs for consistent ride quality
• High-quality construction made in Germany
• Manufacturer Part Number: 50356

Fits select 1998-2005 Volkswagen Golf and Jetta MK4 models (1.8T / 2.0L).

H&R Street Performance SS Coilover kits are engineered for the enthusiast who demands both height and damping adjustability. These systems feature polished stainless steel shock tubes for superior corrosion resistance and a clean aesthetic. Partnering with world-renowned shock specialists at KONI, H&R has developed damping curves optimized for a perfect balance of handling precision and ride comfort.

The fully threaded shock bodies allow for precise vehicle height adjustments, enabling you to dial in your stance while the progressive spring rates maintain composure under various load conditions. Whether you are looking for a track-ready setup or a refined daily driver, the adjustable damping allows you to personalize the shock settings to suit your specific performance or comfort requirements.

• Shock damping adjustable for personalized tuning
• Fully threaded shock bodies for customized ride height
• Polished stainless steel front strut bodies for maximum durability
• Progressive spring rate design for improved handling and comfort
• Developed in partnership with KONI for premium damping performance
• Engineered and manufactured in Germany

• Manufacturer Part Number: 36525-1
• Series: Street Performance SS
• Material: Polished Stainless Steel
• Adjustment Type: Damping and Height Adjustable
• Platform: MK4

Fits select 2005-2019 Volkswagen Jetta, GTI, and Rabbit models (2.0T).

H&R Street Performance SS Coil Overs offer a premium suspension solution for drivers demanding both aesthetic control and fine-tuned handling. Featuring polished stainless steel shock tubes for superior corrosion resistance and longevity, these coilovers utilize a fully threaded body to allow for precise vehicle height adjustments. This specific SS (Stainless Steel) series includes adjustable damping, allowing you to personalize the shock settings to transition between track-ready stiffness and daily driving comfort.

To ensure elite performance, H&R partnered with world-renowned shock specialists KONI to develop damping curves specifically plotted for the MK5 and MK6 chassis. This collaboration results in optimized handling characteristics without sacrificing the superb ride quality H&R is known for. Each kit is engineered and manufactured in Germany to exacting standards.

• Progressive spring rates for a balanced, high-performance ride
• Precision adjustable shock damping to suit specific driving needs
• Polished stainless steel front strut bodies for maximum durability
• Height adjustable via fully threaded shock bodies
• Developed in partnership with KONI
• Manufactured in Germany
• Part Number: 36258-2

Fits 2017-2022 Audi R8 Coupe and Spyder (V10 / V10 Performance / V10 Plus) models equipped with factory Adaptive Suspension (Type 4S).

H&R RSS+ Coil Overs are engineered for drivers seeking professional-grade performance and precise handling. These kits feature a mono-tube shock design for consistent damping control and heat dissipation under heavy loads. The RSS+ series utilizes an external adjustment system that simultaneously fine-tunes rebound and compression damping, allowing you to achieve the perfect balance for your specific driving environment.

Constructed with lightweight, high-tech aluminum shock bodies, these coilovers reduce unsprung weight to improve suspension response. The black hard-anodized finish provides a premium appearance while offering exceptional resistance to corrosion and the elements.

• Mono-Tube Shock Design: Provides immediate response and superior damping control.
• External Damping Adjustment: Simultaneously tunes rebound and compression for precise handling.
• Aluminum Shock Bodies: Hard-anodized lightweight construction for durability and weight savings.
• Fitment Specific: Designed for vehicles with factory electronic/adaptive suspension systems.
• Manufacturer Part Number: 32132-2

Fits 2017-2022 Audi R8 Coupe and Spyder (4S) V10, V10 Performance, and V10 Plus models without adaptive suspension.

H&R RSS+ Coil Overs are engineered for the driver seeking track-level performance and precise handling on the Audi 4S chassis. These kits utilize a high-performance mono-tube shock design to maintain consistent damping and precise control under heavy loads. The RSS+ series features an external damping adjustment system that simultaneously fine-tunes rebound and compression, allowing you to achieve a perfectly balanced suspension setup through a single adjustment point.

To ensure long-term durability and weight reduction, H&R utilizes lightweight aluminum shock bodies finished with a black hard-anodized coating for superior corrosion resistance. This kit is designed to replace factory suspension components to provide a significant upgrade in cornering stability and steering response without compromising the R8's refined dynamics.

• Mono-tube gas pressure shock design for superior control
• Simultaneous external rebound and compression damping adjustment
• Lightweight black hard-anodized aluminum shock bodies
• Precision-engineered for the 4S chassis Audi R8
• Manufacturer Part Number: 32132-1

Fits 2008-2015 Audi R8 (Base, GT, Spyder, and Plus) models not equipped with Magnetic Ride Control (MRC).

H&R RSS+ Coilovers are engineered for the performance enthusiast seeking a professional-grade suspension solution. These kits utilize a mono-tube shock design for superior control and heat dissipation, combined with an external damping adjustment system. This unique adjustment allows you to simultaneously fine-tune rebound and compression damping, providing the perfect balance of feedback, flat cornering, and supreme directional control on the street or track.

• External damping adjustment allows simultaneous tuning of rebound and compression
• High-tech mono-tube shock design for precise suspension response
• Lightweight aluminum shock bodies with a black hard-anodized finish for maximum corrosion resistance
• Vehicle-specific tuned spring rates for optimized handling geometry
• Made in Germany to exacting quality standards
• Manufacturer Part Number: 32058-1

Fits 1998-2004 Porsche 911 Carrera (996 chassis, 2WD models including Coupe, Cabriolet, and Targa).

The H&R Street Performance Coil Over system is the premier suspension solution for Porsche 911 owners seeking a perfect balance between aggressive handling and daily ride comfort. Each kit (MPN: 29510-1) features custom-valved dampers matched specifically to precision-engineered progressive rate springs, resulting in a cohesive, finely tuned suspension system. The fully threaded shock bodies allow for individual height adjustment, lowering the vehicle's center of gravity to improve weight distribution and cornering control.

• Height adjustable with fully threaded shock bodies
• Custom valved dampers for superior ride comfort and performance
• Precision-engineered progressive rate springs
• Reduces body roll and improves steering response
• High-quality construction, manufactured in Germany
• Manufacturer Part Number: 29510-1

Fits 2001-2005 Porsche 911 Turbo.

H&R Street Performance Coil Overs are engineered for the discerning 996 Turbo owner seeking a balance between daily drivability and improved handling dynamics. This suspension system replaces the factory shock and spring assembly with a custom-valved damper and precision-engineered progressive rate spring, specifically tuned for the AWD Porsche chassis. The fully threaded shock bodies allow for precise ride height adjustments, enabling you to lower the center of gravity and fine-tune corner weighting for improved control.

• Zinc-plated threaded shock bodies for superior corrosion resistance and easy adjustment
• Custom-valved dampers paired with precision-engineered progressive rate springs
• Lowers center of gravity for improved handling and reduced body roll
• Height adjustable to allow for fine-tuning of vehicle stance
• Engineered and manufactured in Germany
• Manufacturer Part Number: 29462-2

Fits select 2008-2020 Audi A4, A5, A6, A7, RS5, S4, S5, and allroad.

H&R Street Performance Coil Overs provide a comprehensive suspension solution for Audi owners seeking a balance between refined ride comfort and sharp handling. Each kit features shocks custom-valved to work specifically with H&R's precision-engineered progressive rate springs, creating a cohesive system that improves chassis response and reduces body roll.

The fully threaded shock bodies allow for individual height adjustment, letting you lower the vehicle's center of gravity to improve weight distribution and cornering performance. These units are designed as a direct replacement for factory dampers and springs, offering a tuned feel suitable for both daily commuting and spirited driving.

• Height adjustable via fully threaded shock bodies
• Custom valved dampers paired with progressive rate springs
• Enhanced cornering stability and reduced body roll
• Engineered and manufactured in Germany
• Manufacturer Part Number: 29092-1

Fits select 2013-2020 BMW 2 Series, 3 Series, and 4 Series xDrive models without Electronic Damper Control (Non EDC).

H&R Street Performance Coil Overs are the premier suspension solution for owners who demand a balance between sharp, responsive handling and daily-driver ride comfort. Each kit features high-quality, custom-valved shocks paired with precision-engineered progressive rate springs to create a cohesive suspension system that reduces body roll and eliminates wheel gap.

The fully threaded mono-tube shock bodies provide independent height adjustment, allowing you to fine-tune your vehicle's stance and lower its center of gravity for improved cornering performance and stability. Designed and manufactured in Germany, these coilovers utilize premium materials to ensure long-term durability and performance consistency.

• Fully threaded shock bodies for precise vehicle height adjustment
• Custom-valved shocks and progressive rate springs for superior damping
• Lower center of gravity for enhanced handling and control
• German-engineered and manufactured for high-strength durability
• Designed specifically for xDrive (AWD) chassis without EDC
• Manufacturer Part Number: 28895-6

Fits select 2009-2017 Audi Q5 and SQ5 (8R) models without Magnetic Ride Control (MRC).

H&R Street Performance Coil Overs are the premier suspension solution for Audi owners who demand improved handling without sacrificing ride quality. These kits feature custom-valved dampers paired with precision-engineered progressive rate springs to create a finely tuned suspension system that excels in both daily commuting and spirited driving environments.

The fully threaded shock bodies allow for precise vehicle height adjustments, enabling you to lower the center of gravity and balance the vehicle's weight for superior control. Engineered and manufactured in Germany, this kit provides a significant upgrade over factory suspension components by reducing body roll and improving chassis feedback.

• Precision Engineering: Custom-valved dampers matched to progressive rate springs
• Adjustability: Fully threaded shock body for fine-tuning ride height
• Ride Quality: Balanced for daily comfort and high-performance handling
• Manufacturing: Designed and made in Germany
• MPN: 28827-11

Fits select 2021-2026 Ford Bronco models, including Badlands, Wildtrak, and Raptor. This Performance Series 2.5 rear coilover is engineered to increase off-road capability by extending drop-out travel while maintaining precise on-road comfort. The 2.5-inch impact-extruded 6061-T6 aluminum body is specifically chosen for its ability to dissipate heat four times more effectively than conventional steel bodies, ensuring consistent performance during spirited driving.

Equipped with an Internal Floating Piston (IFP) to keep the shock oil separated from the high-pressure nitrogen gas, this coilover eliminates oil aeration to provide fade-resistant damping. The valving is tuned specifically for the Ford Bronco's weight and suspension geometry to reduce vehicle sway and improve control on technical terrain.

• 2.5-inch impact-extruded 6061-T6 aluminum shock body
• Type II clear-anodized body plating for corrosion resistance
• Internal Floating Piston (IFP) technology separates gas and oil
• 5/8-inch hard chrome-plated heat-treated alloy steel shaft
• High-flow, velocity-sensitive damping
• Application-specific tuning for optimal ride quality
• Fully rebuildable and re-tunable internal components
• Manufacturer Part Number: 987-62-001

Fits select 2021-2026 Ford Bronco models, including Badlands, Raptor, Wildtrak, and Black Diamond.

Improve your vehicle's off-road articulation and on-road stability with the Fox Factory Performance Series 2.5 Front Coilover. Designed to increase drop-out travel, these coilovers feature application-specific valving to reduce body sway and provide a connected feel on both technical trails and high-speed pavement. The 2.5-inch impact-extruded 6061-T6 aluminum bodies dissipate heat four times faster than standard steel shocks, ensuring consistent damping during aggressive use.

The internal floating piston (IFP) architecture separates the high-pressure nitrogen gas from the shock oil, preventing aeration and ensuring fade-resistant performance. This fully rebuildable and re-tunable unit is finished with Type II clear-anodized plating for superior corrosion resistance in harsh environments.

• 2.5-inch impact-extruded 6061-T6 aluminum shock body
• 5/8-inch hard chrome-plated heat-treated alloy steel shaft
• Internal Floating Piston (IFP) design eliminates oil aeration
• High-flow, velocity-sensitive damping for precise control
• Type II clear-anodized finish for corrosion protection
• Fully rebuildable and re-tunable internal components
• Manufacturer Part Number: 987-62-000

Fits 2024-2026 Toyota Tacoma (SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, Limited, TRD Pro, and Trailhunter).

The Fox 2.5 Performance Series IFP (Internal Floating Piston) rear shock is engineered to enhance the off-road capabilities and on-road manners of the 4th Generation Toyota Tacoma. By utilizing a 2.5-inch impact-extruded 6061-T6 aluminum body, this shock dissipates heat significantly more efficiently than conventional steel shocks, maintaining consistent damping performance even during aggressive cycles. The internal floating piston architecture separates the shock oil from the high-pressure nitrogen gas chamber, preventing aeration and ensuring fade-resistant, high-flow velocity-sensitive damping.

Designed for applications with 0 to 1 inch of rear lift, these shocks provide increased drop-out travel and vehicle stability. Every unit features an application-specific tune to reduce vehicle sway and provide a connected, controlled ride. The Type II clear-anodized finish and hard chrome-plated shaft provide superior corrosion resistance for long-term durability in harsh environments.

• 2.5-inch impact-extruded 6061-T6 aluminum shock body
• Internal Floating Piston (IFP) design eliminates oil aeration
• 5/8-inch hard chrome-plated heat-treated alloy steel shaft
• Type II clear-anodized body plating for corrosion protection
• High-flow, velocity-sensitive damping with application-specific valving
• Fully rebuildable and re-tunable for a lifetime of use
• Direct bolt-on installation for 0-1" rear lift heights
• Manufacturer Part Number: 987-24-052

The FOX 2.5 Performance Series Universal Smooth Body shock (987-24-038) delivers professional-grade damping for custom applications requiring 8.1 inches of travel. Built with a 2.5-inch impact-extruded 6061-T6 aluminum body, this shock dissipates heat more effectively than traditional steel bodies while providing superior corrosion resistance through its Type II clear-anodized finish.

Internally, the Internal Floating Piston (IFP) technology separates the high-pressure nitrogen gas from the shock oil to eliminate aeration and ensure fade-free performance in demanding environments. This model also features an integrated Hydraulic Top Out (HTO) piston for controlled extension. The high-flow, velocity-sensitive damping and 5/8-inch hard chrome plated shaft provide a connected ride with reduced vehicle sway.

• Manufacturer Part Number: 987-24-038
• Body: 2.5-inch impact-extruded 6061-T6 aluminum
• Finish: Type II clear-anodized plating
• Shaft: 5/8-inch hard chrome plated heat-treated alloy steel
• Piston: Race-developed high-flow piston design
• Valving: Application-specific velocity-sensitive valving
• Technology: Internal Floating Piston (IFP) and Hydraulic Top Out (HTO)
• Travel: 8.1 inches
• Mounting: Eyelet ends
• Serviceability: Fully rebuildable and re-tunable

Fits select 2024-2026 Lexus GX550, Toyota 4Runner, and Toyota Land Cruiser models.

The Fox Performance Series 2.5 HD Front Coilover is engineered to increase off-road capability by extending drop-out travel while maintaining superior on-road comfort. The 2.5-inch impact-extruded 6061-T6 aluminum body dissipates heat significantly faster than traditional steel, ensuring consistent, fade-resistant performance during aggressive use. Equipped with an Internal Floating Piston (IFP) to separate high-pressure nitrogen gas from the shock oil, these coilovers eliminate oil aeration for precise, predictable damping.

• 2.5-inch impact extruded 6061-T6 aluminum body with Type II clear-anodized finish
• Adjustable 0-2.25 inches of front lift height
• 5/8-inch hard chrome-plated heat-treated alloy steel shaft
• Hydraulic Top Out (HTO) piston for controlled extension during high-speed events
• Race-developed high-flow velocity-sensitive damping
• Fully rebuildable and re-tunable internal design
• Manufacturer Part Number: 987-02-016

Built for the long haul, these shocks are torture-tested to provide a lifetime of reliability. The application-specific tuning reduces vehicle sway and provides a connected ride feel across varying terrain.

Fits select 2024-2026 Lexus GX550, Toyota Land Cruiser, and 2025-2026 Toyota 4Runner models.

The Fox 2.5 Performance Series Front Coilover (MPN: 987-02-015) is designed to increase off-road capability by extending drop-out travel while maintaining superior on-road comfort. Built with a 2.5-inch impact-extruded 6061-T6 aluminum body, this coilover dissipates heat four times more effectively than conventional steel shocks, ensuring consistent, fade-resistant performance in demanding environments. The internal floating piston (IFP) design isolates the high-pressure nitrogen gas from the shock oil, preventing aeration and ensuring predictable damping across any terrain.

Each unit features a hydraulic top-out (HTO) piston and application-specific valving to reduce vehicle sway and provide a connected feel. For long-term reliability, the assembly is fully rebuildable and re-tunable, featuring a 5/8-inch hard chrome shaft and Type II clear-anodized plating for maximum corrosion resistance.

• 2.5-inch impact-extruded 6061-T6 aluminum body
• Internal Floating Piston (IFP) separates oil and gas
• High-flow velocity-sensitive damping with application-specific tuning
• 5/8-inch hard chrome-plated heat-treated alloy steel shaft
• Hydraulic Top Out (HTO) piston for controlled extension
• Type II clear-anodized finish for corrosion protection
• Fully rebuildable and re-tunable
• Manufacturer Part Number: 987-02-015