Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, TRD Pro, TRD Off-Road, SR, SR5, Trail, and X-Runner).

Upgrade your front suspension with ICON Vehicle Dynamics V.S. 2.5 Series Remote Reservoir Coilovers. This kit is engineered to significantly improve ride quality and off-road capability for the 2005-2023 Toyota Tacoma. The 2.5-inch shock bodies provide a larger piston area compared to factory components, yielding superior damping control. Remote reservoirs dramatically increase oil volume and surface area, dissipating heat to prevent cavitation and shock fade during aggressive use.

These Extended Travel coilovers are equipped with ICON’s exclusive Compression Damping Control Valve (CDCV) system. This externally adjustable valve features 10 distinct settings, allowing you to fine-tune your suspension for everything from high-speed desert sections to technical rock crawling and daily street driving. Note that the extended travel design requires the installation of aftermarket front upper control arms to accommodate the increased wheel travel.

• MPN: 58735C
• Lift Height: 0-3.5" (2005-2015 models) or 0-2.75" (2016-2023 models)
• Damping Adjustment: CDCV with 10 external compression settings
• Construction: CAD-plated threaded shock bodies with billet aluminum upper mounts
• Hardware: Includes reservoir mounting brackets and sway bar relocation brackets
• Bearings: 5/8" PTFE-lined spherical bearings for durability
• Serviceability: Fully rebuildable and re-valvable design

Fits select 2005-2023 Toyota Tacoma models including Base, Pre Runner, TRD Pro, TRD Off-Road, SR5, and Limited. This ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover kit is engineered to provide maximum travel and superior damping for the 2005-2023 Toyota Tacoma. These adjustable coilovers provide 0-3.5 inches of lift height on 2005-2015 models and 0-2.75 inches on 2016-2023 models, accommodating larger wheel and tire combinations.

Built with a 2.5-inch shock body and vehicle-specific valving, these shocks feature external remote reservoirs that significantly increase oil volume and surface area for better heat dissipation during hard use. This design prevents cavitation and shock fade in aggressive off-road environments. As an Extended Travel version, these coilovers offer increased wheel travel but strictly require the installation of aftermarket front upper control arms (UCAs).

• Manufacturer Part Number: 58735
• Lift Height: 0-3.5" (2005-2015) or 0-2.75" (2016-2023)
• 2.5" CAD-plated threaded shock body for corrosion resistance
• External reservoirs for maximum cooling and fluid transfer
• 250 PSI nitrogen-charged internal reservoir
• ICON-engineered coil springs with billet aluminum upper mounts
• 5/8" PTFE-lined spherical bearings for durability
• Includes reservoir mounting brackets and sway bar relocation brackets
• Completely rebuildable and re-valvable design

Fits 1996-2002 Toyota 4Runner (Base, Limited, and SR5).

The ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an essential upgrade for the third-generation Toyota 4Runner, designed to improve both on-road handling and off-road capability. This extended travel system offers 0-3” of adjustable lift height, providing the clearance needed for larger, more aggressive wheel and tire combinations. By utilizing a larger 2.5-inch shock body and increased piston area, these coilovers deliver superior damping compared to factory components, effectively managing heat and terrain impacts.

A standout feature of this kit is the ICON CDC Valve (Compression Damping Control Valve), which provides 10 external adjustment settings. This allows you to quickly tune your ride from soft for daily driving to firm for high-speed desert runs or heavy-duty trail use. The remote reservoirs further enhance performance by increasing oil capacity, ensuring the shocks remain at a stable operating temperature during sustained off-road cycles.

• Manufacturer Part Number: 58716C
• 0-3" adjustable lift height
• CAD plated shock body with 7/8" induction hardened, chrome plated shaft
• Remote reservoir for maximum cooling and consistent damping performance
• ICON CDCV with 10 user-adjustable compression settings
• 6061 aircraft grade aluminum CNC-machined components
• FK Rod End bearings for long-lasting durability and minimal deflection
• ICON-engineered coil springs
• 100% bolt-on installation; no drilling or welding required

Fits 1996-2002 Toyota 4Runner (Base, Limited, and SR5).

The ICON Vehicle Dynamics V.S. Series 2.5” Remote Reservoir (RR) Extended Travel coilover kit is a premium suspension upgrade for the 1996-2002 Toyota 4Runner. Engineered to provide significantly improved damping performance over stock components, these coilovers utilize a massive 2.5” shock body to increase oil capacity and piston surface area. This results in superior ride quality and heat dissipation for both highway driving and technical off-road trails. The remote reservoirs further enhance performance by keeping shock oil at cooler operating temperatures during sustained use in harsh environments.

Designed for flexibility, these coilovers offer 0-3” of adjustable lift height, allowing clearance for larger, more aggressive wheel and tire combinations. As an "Extended Travel" model, this kit provides increased wheel travel over standard ICON coilovers, maximizing suspension articulation when paired with appropriate aftermarket upper control arms. The system is 100% bolt-on, requiring no cutting or welding for installation.

• Lift Height: 0-3” adjustable lift
• Shock Body: 2.5” CAD plated body for corrosion resistance
• Shaft: 7/8” induction hardened, chrome plated shaft
• Reservoir: External remote reservoirs for consistent damping and cooling
• Components: 6061 aircraft-grade aluminum CNC-machined components
• Bearings: FK Rod End bearings for durability and reduced deflection
• Installation: 100% bolt-on design
• Manufacturer Part Number: 58716

Fits 1995-2004 Toyota Tacoma Base, DLX, Limited, Pre Runner, S-Runner, and SR5.

The ICON Vehicle Dynamics VS Series 2.5-inch remote reservoir coilover kit is engineered for 1996-2004 Toyota Tacoma owners seeking a significant suspension upgrade. These coilovers provide a sport-tuned feel for both daily driving and technical off-roading, offering 0-3 inches of adjustable lift height to clear larger tire packages. The extended travel design increases wheel travel compared to factory shocks, though it requires the installation of aftermarket upper control arms (UCAs) to maintain proper alignment and clearance.

This kit features ICON's Compression Damping Control Valve (CDCV), which allows for 10 precise settings of external compression damping adjustment. By controlling fluid flow under compression, you can easily dial in your ride for highway comfort, slow-speed rock crawling, or high-speed desert runs. The remote reservoirs increase oil capacity and cooling surface area, ensuring consistent damping performance and preventing shock fade during heavy-duty use.

• Adjustable Lift: 0-3 inches of front lift height.
• CDCV Technology: External 10-position compression damping adjustment.
• Extended Travel: Designed for increased wheel travel (requires aftermarket UCAs).
• Durable Construction: Corrosion-resistant CAD plated shock bodies with 7/8-inch induction hardened, chrome-plated shafts.
• Precision Machining: 6061 aircraft-grade aluminum CNC machined components.
• High-Quality Bearings: FK Rod End bearings for maximum longevity and minimal deflection.
• Easy Installation: 100% bolt-on design with no cutting or welding required.
• Manufacturer Part Number: 58715C

Fits 1995-2004 Toyota Tacoma (Base, DLX, Limited, Pre Runner, S-Runner, and SR5).

The ICON Vehicle Dynamics V.S. Series 2.5” Remote Reservoir Coilover Kit is a high-performance front suspension upgrade designed specifically for the first-generation Toyota Tacoma. These coilovers are engineered with vehicle-specific valving to provide a sport-tuned feel that balances on-road stability with off-road compliance. The 2.5-inch shock body provides a significant increase in oil volume and piston surface area compared to factory units, resulting in superior damping and heat dissipation across aggressive terrain.

This "Extended Travel" version allows for increased downward suspension movement, maximizing wheel travel to keep tires in contact with the ground. Note: These extended travel coilovers require the installation of aftermarket front upper control arms to clear the suspension components at full droop. The external remote reservoirs further increase cooling capacity, ensuring consistent damping performance during prolonged use in demanding environments.

• Lift Height: Adjustable 0-3" of front lift
• Shock Body: 2.5" corrosion-resistant CAD plated body
• Shaft: 7/8" induction hardened, chrome plated shaft
• Materials: 6061 aircraft-grade aluminum CNC machined components
• Bearings: FK Rod End bearings for durability and reduced deflection
• Springs: ICON engineered coil springs
• Installation: 100% bolt-on; no cutting or welding required
• MPN: 58715

Fits 1995-2004 Toyota Tacoma (Base, DLX, Limited, Pre Runner, S-Runner, and SR5).

ICON Vehicle Dynamics V.S. Series 2.5” Remote Reservoir Coilover Shocks are a premier suspension upgrade designed for the 1995-2004 Toyota Tacoma. Engineered for both 4WD and PreRunner applications, these coilovers utilize vehicle-specific valving to deliver a sport-tuned feel on-road and exceptional control off-road. The 2.5” shock body and increased piston area provide significantly better damping and ride characteristics over factory components, while the remote reservoirs increase oil capacity to manage heat and prevent fade during sustained heavy use.

This kit provides 0-3” of lift height adjustability, allowing for more aggressive wheel and tire combinations. Built with 6061 aircraft-grade aluminum CNC-machined components and a corrosion-resistant CAD-plated shock body, these shocks are designed for longevity. The 7/8" induction-hardened, chrome-plated shafts and FK Rod End bearings ensure minimal deflection and high durability in demanding terrain.

• Fits 1995-2004 Toyota Tacoma models
• Height-adjustable coilovers providing 0-3" of lift
• 2.5" CAD-plated shock body with 7/8" induction hardened, chrome-plated shaft
• External remote reservoirs for improved cooling and consistent damping
• 6061 CNC-machined aluminum components for maximum strength
• FK Rod End bearings for extended service life and minimal deflection
• 100% bolt-on installation; no cutting or welding required
• ICON-engineered coil springs
• Manufacturer Part Number: 58710

Fits 2024-2025 Toyota Land Cruiser 250 Series (1958, Base, and First Edition models).

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit provides a significant performance upgrade for the 2024-2025 Toyota Land Cruiser 250 Series. These adjustable coilovers offer 1.25–3 inches of lift height adjustment, allowing for larger wheel and tire combinations while improving wheel travel. Engineered with vehicle-specific valving and a large 2.5-inch shock body, this kit delivers superior damping and heat dissipation compared to factory components.

Constructed for durability and longevity, these coilovers feature CAD-plated shock bodies and 7/8-inch diameter shafts. The CNC-machined 6061 aircraft-grade aluminum components and FK rod end bearings ensure precise suspension movement with minimal deflection. This system is fully rebuildable and re-tunable, making it a long-term suspension solution for both daily driving and off-road exploration.

• Part Number: 58691
• 1.25–3 inch lift height adjustability
• 2.5 inch diameter shock bodies with internal reservoirs
• Corrosion-resistant CAD plated finish
• 7/8 inch diameter induction hardened chrome plated shafts
• CNC machined 6061 aircraft grade aluminum components
• FK rod end bearings for reduced deflection
• ICON engineered coil springs included
• Fully rebuildable and re-tunable design

Fits 2024-2025 Lexus GX550 (Luxury, Premium, and Premium+ models).

The ICON Vehicle Dynamics V.S. 2.5 Series front coilover kit provides a significant suspension upgrade for the 2024-2025 Lexus GX550. These coilovers are engineered with vehicle-specific length and valving to maximize wheel travel and improve damping performance across both highway and off-road terrain. The adjustable ride height allows for 1.25–3 inches of front lift, providing the clearance necessary for larger, more aggressive wheel and tire packages.

Each coilover features a large 2.5-inch diameter shock body with an internal reservoir to increase oil capacity and piston surface area compared to factory components. This design ensures consistent damping and superior heat dissipation during extended use. Constructed with 6061 aircraft-grade aluminum CNC-machined components and CAD-plated shock bodies, these units are built for longevity in harsh environments. The inclusion of FK rod end bearings further reduces deflection and enhances suspension response.

• Adjustable lift height: 1.25–3" over stock
• 2.5" diameter shock bodies with internal reservoirs
• 7/8" diameter induction-hardened, chrome-plated shafts
• Corrosion-resistant CAD-plated shock bodies
• 6061 CNC-machined aluminum components
• FK rod end bearings for reduced deflection and increased durability
• Fully rebuildable and re-tunable design
• ICON engineered coil springs included
• Manufacturer Part Number: 58690

Fits select 2024-2025 Toyota Tacoma models including SR, SR5, TRD Off-Road, TRD PreRunner, TRD Sport, and Limited. This ICON V.S. 2.5 Series internal reservoir (IR) front coilover kit is engineered to provide a significant performance upgrade for the fourth-generation Tacoma suspension. These vehicle-specific coilovers offer 1.25 to 3 inches of lift height adjustability, allowing for larger tire fitment and improved ground clearance while maintaining exceptional ride quality on and off the trail.

Constructed with a large 2.5-inch diameter shock body and 7/8-inch diameter shafts, these shocks offer increased piston surface area over stock components for superior damping and heat dissipation. The CAD-plated shock bodies and 6061 aircraft-grade aluminum CNC-machined components provide long-term corrosion resistance. For 4WD applications, ICON recommends pairing these with a front differential drop to maintain proper CV angles and maximize wheel travel.

• Adjustable 1.25-3" lift height over stock
• 2.5" diameter shock bodies with internal reservoirs for consistent damping
• 7/8" diameter induction hardened, chrome plated shock shafts
• Corrosion resistant CAD plated shock bodies with 6061 aluminum components
• FK rod end bearings for maximum longevity and minimal deflection
• Fully rebuildable and re-tunable design
• ICON-engineered coil springs
• Manufacturer Part Number: 58680

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (All Trims).

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit is a high-performance suspension upgrade designed to replace factory struts with race-proven technology. These adjustable coilovers are engineered to provide superior damping control and heat dissipation, significantly improving ride quality and handling whether you are navigating technical trails or highway commutes.

Featuring 2.5-inch diameter CAD-plated shock bodies and 7/8-inch induction-hardened chrome shafts, these units are built for durability and precision. The adjustable ride height allows for 1.25-3.5" of lift on Tundra models and 3-4.5" on Sequoia models, providing the necessary clearance for larger, more aggressive wheel and tire combinations. ICON uses vehicle-specific valving and FK rod end bearings to ensure maximum travel and minimal deflection.

• Adjustable lift height: 1.25-3.5" (Tundra) or 3-4.5" (Sequoia)
• 2.5" CAD-plated shock bodies for maximum corrosion resistance
• 7/8" diameter induction-hardened chrome-plated shafts
• 6061 aircraft-grade aluminum CNC-machined components
• FK rod end bearings for extended longevity and reduced friction
• ICON-engineered coil springs for optimal performance and comfort
• Fully rebuildable and re-tunable design
• Includes all necessary hardware for installation
• Manufacturer Part Number: 58670

Fits select 2007-2021 Toyota Tundra models equipped with a Procomp 6-inch lift kit.

The ICON Vehicle Dynamics VS Series 2.5 Internal Reservoir (IR) Coilover Kit is specifically engineered to improve the performance and ride quality of lifted Tundras. These custom shocks feature a travel length optimized for use with Procomp 6-inch suspension systems, ensuring proper articulation and preventing bottoming out or over-extension. Each shock is valved specifically for the Toyota Tundra's weight and geometry to provide a balanced feel on the street and superior damping in rough terrain.

• Lift Specific: Length optimized for Procomp 6-inch lift kits to maintain proper suspension geometry.
• 2.5 Series Body: Large diameter shock body increases oil capacity for better heat dissipation and consistent performance.
• Internal Reservoir (IR): Internal gas port design provides reliable damping without the complexity of external hoses.
• Premium Construction: Built with high-quality components for long-term durability in harsh off-road environments.
• Application: Designed for direct installation in the front suspension of 2007-2021 Tundra models.
• Manufacturer Part Number: 58651-CB

Fits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia models across all trim levels.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover shocks are a premium suspension upgrade designed to increase wheel travel and improve damping performance. These height-adjustable coilovers allow for 1-3 inches of front-end lift, providing the necessary clearance for larger, more aggressive wheel and tire packages. Each shock is vehicle-specifically tuned with custom valving to deliver superior ride quality and control for both daily driving and off-road use.

Built for the long haul, the 58650 kit features 2.5-inch diameter CAD-plated shock bodies for increased oil volume and heat dissipation. The 7/8-inch diameter shafts and 6061 aircraft-grade aluminum CNC-machined components provide high-strength durability, while FK rod end bearings minimize deflection. These coilovers are fully rebuildable and re-tunable, ensuring a lifetime of consistent performance.

• 2.5-inch diameter shock bodies with internal reservoirs for consistent damping
• Adjustable 1-3 inch lift height range over stock
• 7/8-inch diameter induction-hardened, chrome-plated shock shafts
• Corrosion-resistant CAD-plated shock bodies
• 250 PSI nitrogen-charged internal reservoir
• FK rod end bearings for maximum longevity and minimal deflection
• 6061 aircraft-grade aluminum CNC-machined components
• ICON engineered coil springs
• Fully rebuildable and re-tunable design
• Manufacturer Part Number: 58650

Fits 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover shocks are a high-performance suspension upgrade engineered to improve ride quality both on-road and in technical off-road terrain. These adjustable coilovers provide 0-3.5 inches of front lift height, accommodating larger and more aggressive wheel and tire combinations. As an Extended Travel version, these shocks are designed to provide maximum suspension articulation when paired with aftermarket front upper control arms.

Built for durability and precision, these coilovers feature a large 2.5-inch shock body for increased oil volume and a 7/8-inch shaft to handle heavy side loads. ICON’s vehicle-specific valving optimizes low-speed damping to reduce body roll and nose dive, while the fully rebuildable design ensures a lifetime of service. The kit utilizes FK Rod End bearings to minimize deflection and CAD-plated bodies for superior corrosion resistance.

• Adjustable Lift: Provides 0-3.5" of front lift height
• Extended Travel: Optimized for use with aftermarket upper control arms
• Superior Build: 2.5" shock body with a 7/8" hardened chrome shaft
• Durability: Corrosion-resistant CAD plated body and FK Rod End bearings
• Premium Springs: ICON-engineered coil springs guaranteed for life against sagging or breakage
• Serviceability: Fully rebuildable and re-valvable design
• Installation: Direct bolt-in design for OEM shock locations
• MPN: 58647

Fits select 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover shocks are a high-performance suspension upgrade designed for the 2010-2024 Toyota 4Runner and related platforms. These adjustable coilovers provide 0-3.5” of front lift height, creating the necessary clearance for larger, more aggressive wheel and tire combinations. Engineered with vehicle-specific valving and a massive 2.5-inch shock body, these units offer significantly increased piston area and fluid volume over factory components, resulting in superior heat dissipation and consistent damping performance both on- and off-road.

Each coilover features a corrosion-resistant CAD plated body and a robust 7/8" hardened chrome shaft for maximum durability. The bolt-on design allows for a direct fit into OEM shock locations, maintaining compatibility with stock upper control arms while maximizing available wheel travel. These shocks are fully serviceable, meaning they can be rebuilt or revalved to extend their service life indefinitely.

• Adjustable lift height from 0 to 3.5 inches
• Large 2.5" shock body increases oil capacity and damping surface
• Vehicle-specific valving for optimized ride quality and vehicle control
• ICON-engineered coil springs guaranteed for life against sagging or breakage
• 7/8" diameter hardened chrome shock shafts
• FK Rod End bearings for minimal deflection and high-load durability
• Cadmium plated shock body for superior corrosion resistance
• Fully rebuildable and revalveable design
• Manufacturer Part Number: 58646

Fits 2003-2009 Toyota 4Runner, 2007-2009 Toyota FJ Cruiser, and 2003-2009 Lexus GX470.

The ICON Vehicle Dynamics 58645 V.S. 2.5 Series IR (Internal Reservoir) coilover kit is engineered to provide superior off-road articulation and refined street handling. These extended travel coilovers are specifically tuned for each application, offering increased wheel travel compared to standard-length shocks. This extended length configuration requires the use of aftermarket upper control arms to ensure proper suspension geometry. Built with a 2.5-inch diameter CAD-plated body and a 7/8-inch induction-hardened shaft, these coilovers provide the heat dissipation and durability needed for technical terrain.

Like all ICON shock absorbers, the V.S. 2.5 Series is 100% rebuildable and revalveable, providing an immeasurable service life. The bolt-in design allows for direct installation into factory mounting points, while the adjustable ride height allows for 0-3.5 inches of front lift to accommodate larger tire packages.

• Adjustable 0-3.5" front lift height
• Extended travel design for increased wheel articulation (Requires aftermarket UCAs)
• ICON-engineered coil springs guaranteed for life against sagging
• Large 2.5" shock body with 7/8" shaft for maximum durability
• FK Rod End bearings for minimal deflection and extended service life
• 100% rebuildable and revalveable
• Corrosion-resistant CAD plated shock body
• Part Number: 58645

Fits select 2003-2009 Toyota 4Runner, FJ Cruiser, and Lexus GX470 models.

The ICON Vehicle Dynamics V.S. 2.5 Series IR (Internal Reservoir) coilover kit is engineered to deliver a significant upgrade in damping performance and wheel travel. Designed for a direct bolt-in installation into factory shock locations, these coilovers are specifically valved for the 4Runner, FJ, and GX470 platforms to balance aggressive off-road compliance with composed on-road stability. The adjustable design provides 0 to 3.5 inches of front lift height, allowing for larger tire fitments and increased ground clearance.

Each shock is built for the long haul with a corrosion-resistant CAD plated body and a robust 7/8-inch induction hardened chrome-plated shaft. ICON utilizes high-quality coil springs guaranteed against sagging, while FK Rod End bearings ensure minimal deflection and extended service life. These units are 100% rebuildable and revalveable, providing an immeasurable service life for enthusiasts who demand the most from their suspension.

• Adjustable 0-3.5" front lift height for improved ground clearance
• 2.5-inch shock body with 7/8-inch hardened chrome-plated shaft
• Corrosion-resistant CAD plated shock bodies for harsh environments
• Vehicle-specific valving for optimized ride quality and reduced body roll
• FK Rod End bearings for maximum durability and longevity
• 100% rebuildable and revalveable design
• Includes ICON-engineered coil springs
• Manufacturer Part Number: 58640

Fits 2005-2023 Toyota Tacoma models. These ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir (IR) front coilovers are engineered to provide maximum wheel travel and superior damping performance for both daily driving and aggressive off-road use.

This extended travel kit features heavy-duty 700 lbs/in coil springs, specifically designed to handle the additional weight of aftermarket bumpers, winches, or dual battery setups. The 2.5-inch diameter shock bodies offer significantly more oil volume and piston surface area than factory components, resulting in better heat dissipation and consistent control through rough terrain. Note: The extended travel design allows for more suspension droop but requires the use of aftermarket upper control arms (UCAs).

• Adjustable lift height: 0-3.5" for 2005-2015 models; 0-2.75" for 2016-2023 models
• ICON-engineered 700 lb/in coil springs optimized for vehicles with heavy front-end accessories
• Corrosion-resistant CAD plated shock bodies with 7/8" hardened chrome shafts
• FK Rod End bearings for maximum durability and reduced deflection
• Fully rebuildable and revalvable design for long-term serviceability
• Direct bolt-in installation into factory mounting locations
• Manufacturer Part Number: 58635-700

Fits 2005-2023 Toyota Tacoma models (Base, Pre Runner, X-Runner, SR, SR5, Limited, Trail, TRD Sport, TRD Off-Road, and TRD Pro).

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit is a premium suspension upgrade designed to increase wheel travel and improve damping performance on the 2nd and 3rd Gen Toyota Tacoma. These coilovers utilize a large 2.5-inch shock body to provide significantly more piston area and oil volume than factory shocks, resulting in superior heat dissipation and ride control. This extended travel version is specifically engineered to provide maximum droop travel, though it requires the installation of aftermarket front upper control arms for proper clearance and alignment.

• Adjustable lift height: 0-3.5" (2005-2015 models) or 0-2.75" (2016-2023 models)
• 2.5-inch diameter shock body with corrosion-resistant CAD plating
• 7/8-inch diameter induction hardened, chrome plated shock shaft
• Vehicle-specific valving for optimized on- and off-road stability
• FK Rod End bearings for maximum durability and reduced deflection
• ICON-engineered coil springs guaranteed for life against sagging
• Fully serviceable and rebuildable design for a lifetime of use
• Direct bolt-in installation to factory mounting points
• Manufacturer Part Number: 58635

Fits 2005-2023 Toyota Tacoma models including Base, Limited, Pre Runner, SR, SR5, TRD Pro, TRD Off-Road, TRD Sport, and X-Runner equipped with a Pro Comp 6-inch lift kit.

The ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir (IR) front coilover shocks are engineered to significantly upgrade the front-end performance of Tacomas running a Pro Comp 6-inch suspension lift. These coilovers utilize a large 2.5-inch diameter shock body and increased piston area to provide superior damping and heat dissipation compared to factory components. This kit is specifically valved for the Tacoma platform to deliver maximum wheel travel and improved ride quality for both daily driving and aggressive off-road use.

Constructed with 6061 aircraft-grade CNC machined aluminum components and corrosion-resistant CAD plated shock bodies, these coilovers are built for durability in harsh environments. The 7/8-inch diameter shafts and FK rod end bearings ensure minimal deflection and extended service life. The system features a fully rebuildable and re-tunable design, allowing for long-term maintenance and custom performance adjustments.

• Application-specific length for fitment with Pro Comp 6-inch lift kits
• Adjustable ride height for fine-tuning vehicle stance and tire clearance
• Large 2.5-inch shock bodies with internal reservoir design
• Heavy-duty 7/8-inch diameter shafts and ICON-engineered coil springs
• 6061 CNC machined aluminum components for strength and weight savings
• FK rod end bearings for reduced deflection and improved longevity
• Fully rebuildable and re-tunable (MPN: 58631-CB)

Fits 2005-2023 Toyota Tacoma models including Base, Pre Runner, X-Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, and Trail editions.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit is a significant suspension upgrade designed for the 2005-2023 Toyota Tacoma. This kit is specifically engineered with a 700 lb/in spring rate to accommodate vehicles equipped with heavy front-end accessories such as aftermarket steel bumpers, winches, or dual battery systems. By increasing the shock body diameter to 2.5 inches, these coilovers provide a larger piston area and increased oil volume compared to factory shocks, resulting in superior heat dissipation and damping control during off-road use.

These coilovers are height-adjustable, allowing for 0-3.5 inches of lift on 2005-2015 models and 0-2.75 inches on 2016-2023 models. Built with 6061 aircraft-grade aluminum components and CAD-plated shock bodies, they are designed to withstand harsh environments while maintaining longevity through fully rebuildable and re-tunable internals.

• Manufacturer Part Number: 58630-700
• Spring Rate: 700 lbs/in for heavy front-end loads
• Shock Diameter: 2.5-inch CAD plated bodies for corrosion resistance
• Shaft Diameter: 7/8-inch induction hardened, chrome plated steel
• Lift Height (2005-2015): Adjustable 0-3.5 inches
• Lift Height (2016-2023): Adjustable 0-2.75 inches
• Mounting: FK Rod End bearings for maximum durability and reduced deflection
• Construction: CNC machined 6061 aircraft-grade aluminum components
• Serviceability: Fully rebuildable and re-tunable

Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, and Limited).

ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir (IR) front coilovers provide a significant upgrade for the 2005-2023 Toyota Tacoma, delivering increased wheel travel and damping performance. These coilovers feature a large 2.5-inch shock body that increases oil volume and piston surface area over stock components, resulting in superior heat dissipation and vehicle control during off-road use. The height-adjustable design allows for leveling the front end or accommodating larger, more aggressive tire combinations.

• Adjustable lift height: 0-3.5 inches for 2005-2015 models; 0-2.75 inches for 2016-2023 models.
• Corrosion-resistant CAD plated shock bodies with heavy-duty 7/8-inch diameter shafts.
• 6061 aircraft-grade aluminum CNC-machined components for high strength and durability.
• FK rod end bearings provide extended longevity and minimal deflection.
• ICON-engineered coil springs designed specifically for the Tacoma's weight and suspension geometry.
• Fully rebuildable and re-tunable to suit specific vehicle setups.
• Manufacturer Part Number: 58630

Fits 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia (Base, SR5, and Limited models).

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit provides a significant performance upgrade for the first-generation Tundra and Sequoia. These extended travel coilovers offer 0–2.5 inches of lift height adjustability, creating clearance for larger wheel and tire combinations. This specific kit features a heavy-duty 700 lbs/in spring rate, specifically engineered to support the additional front-end weight of aftermarket bumpers, winches, and armor without sacrificing ride height or performance.

As an extended travel version, these shocks provide increased wheel travel for improved off-road articulation and damping, though they require the installation of aftermarket front upper control arms. Every shock is vehicle-specifically tuned to ensure balanced handling and superior ride quality over factory components. Built for longevity, these units feature corrosion-resistant CAD-plated bodies and 6061 aircraft-grade aluminum CNC-machined components.

• Adjustable 0–2.5" lift height
• 2.5-inch diameter shock bodies with internal reservoirs
• Extended travel design for maximum wheel articulation
• Heavy-duty 700 lbs/in ICON engineered coil springs
• 7/8-inch diameter induction-hardened, chrome-plated shafts
• FK rod end bearings for minimal deflection and extended service life
• Corrosion-resistant CAD-plated shock bodies
• Fully rebuildable and re-tunable design
• Manufacturer Part Number: 58625-700

Fits select 1995-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner models.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) Front Coilover Kit is a high-performance suspension upgrade for first-generation Tacomas and third-generation 4Runners. These adjustable coilovers provide 0-3 inches of lift, allowing for more aggressive wheel and tire combinations while significantly improving ride quality both on-road and across technical terrain. The larger 2.5-inch shock body and increased piston area offer superior damping and heat dissipation compared to factory components.

This "Extended Travel" model is engineered to maximize wheel travel. Please note that the additional droop travel provided by these shocks requires the installation of aftermarket front upper control arms to prevent component binding. Each unit features ICON-engineered coil springs and is fully rebuildable and re-tunable to ensure long-term serviceability.

• Manufacturer Part Number: 58615
• 0-3" adjustable front lift height
• 2.5" shock body with internal reservoir
• 7/8" diameter induction-hardened, chrome-plated shock shafts
• Corrosion-resistant CAD plated shock bodies
• FK rod end bearings for increased longevity and reduced deflection
• CNC machined 6061 aircraft-grade aluminum components
• 250 PSI nitrogen-charged design
• Includes ICON-specific coil springs
• Fully rebuildable and re-tunable

Fits select 1995-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner.

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir (IR) front coilover kit is a premier suspension upgrade for first-generation Tacomas and third-generation 4Runners. These adjustable coilovers provide 0-3 inches of front lift height, allowing for the installation of larger wheel and tire combinations. Engineered with vehicle-specific valving and a massive 2.5-inch shock body, this kit increases piston area and oil volume to improve heat dissipation and damping consistency on technical trails or high-speed washboards.

Constructed with 6061 aircraft-grade aluminum CNC-machined components and corrosion-resistant CAD-plated shock bodies, these coilovers are built for longevity in harsh environments. The 7/8-inch induction-hardened chrome-plated shafts and FK rod end bearings ensure minimal deflection and extended service life. The system is fully rebuildable and re-tunable, providing a long-term solution for enthusiasts seeking balanced vehicle control when paired with ICON rear shock absorbers.

• Adjustable front lift height from 0-3 inches
• Large 2.5-inch shock body with increased oil capacity over stock components
• 7/8-inch diameter induction-hardened chrome-plated shafts
• 250 PSI nitrogen-charged internal reservoir design
• FK rod end bearings for reduced deflection and improved durability
• CNC-machined 6061 aircraft-grade aluminum components
• Fully rebuildable and re-tunable for custom performance
• Includes ICON-engineered coil springs
• Manufacturer Part Number: 58610

Fits 2021-2023 Ford Bronco models across all trim levels including Badlands, Wildtrak, and Sasquatch-equipped packages.

The ICON Vehicle Dynamics V.S. 2.5 Series Rear Remote Reservoir Coilovers with Compression Damping Electronic Valves (CDEV) provide the ultimate suspension upgrade for the 2021-2023 Ford Bronco. These adjustable units provide 2-3 inches of lift for non-Sasquatch 4-door models (1.25-2.25 inches for Sasquatch models), allowing for larger wheel and tire combinations and up to 14 inches of wheel travel. The CDEV technology, paired with the ICON Intelligent Control (IIC) module, allows for lightning-fast, active electronic shock tuning that adapts to terrain in real-time.

• ICON Compression Damping Electronic Valve (CDEV) technology for active, on-the-fly damping adjustments
• Remote reservoirs for increased oil volume and superior heat dissipation during high-speed off-road use
• Vehicle-specific valving with 2.5-inch diameter CAD plated bodies and 7/8-inch diameter shafts
• Progressive triple-rate coil springs for a smooth ride height and increased bottom-out resistance
• 6061 Aircraft-grade aluminum CNC-machined components for high-strength durability
• FK Rod End bearings for maximum longevity and minimal deflection
• 100% bolt-on installation—no drilling, cutting, or welding required
• Fully rebuildable and re-tunable design
• Manufacturer Part Number: 48710E

Note: Installation requires ICON 2.5 Series front coilovers with CDEV and the matching IIC module for active front-to-rear damping balance.

Fits 2021-2023 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, and Wildtrak.

The ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with Compression Damping Electronic Valve (CDEV) provide a significant performance upgrade for the 2021-2023 Ford Bronco. Designed for versatility, these coilovers offer 3-4 inches of lift for non-Sasquatch models and 2-3 inches of lift for Sasquatch-equipped vehicles. The increased piston area and 2.5-inch shock bodies yield superior heat dissipation and damping control compared to factory components, facilitating larger wheel and tire combinations and up to 11.5 inches of wheel travel.

This kit features ICON’s proprietary CDEV technology, allowing for near-instantaneous electronic compression damping adjustments. When paired with the ICON Intelligent Control (IIC) module, the system monitors G-forces and chassis movement to automatically tune each shock to the terrain. Note: ICON 2.5 Series rear coilovers with CDEV and the IIC module are required to enable active vehicle control.

• Adjustable lift height: 3-4" (non-Sasquatch) or 2-3" (Sasquatch)
• ICON CDEV technology for on-the-fly electronic damping adjustment
• 2.5-inch CAD plated shock bodies with 7/8-inch diameter shafts
• Remote reservoirs for increased oil volume and thermal stability
• 6061 aircraft-grade aluminum CNC machined components
• FK rod end bearings for reduced deflection and maximum longevity
• 100% bolt-on installation; no cutting or welding required
• Fully rebuildable and re-tunable design
• Manufacturer Part Number: 48700E

Fits 2021-2023 Ford Bronco models (Base, Big Bend, Black Diamond, Badlands, Outer Banks, Wildtrak, Everglades, and Heritage). This ICON V.S. 2.5 Series remote reservoir front coilover kit is engineered to provide superior damping performance and increased wheel travel for both Sasquatch and non-Sasquatch equipped vehicles.

These adjustable coilovers offer vehicle-specific valving and a massive 2.5-inch shock body that significantly increases oil volume and piston area compared to factory dampers. The remote reservoirs enhance heat dissipation, preventing shock fade and cavitation during aggressive off-road use. By utilizing a 100% bolt-on design, these coilovers replace the factory front assemblies to allow for larger tire fitment and improved ground clearance without the need for cutting or welding.

• Adjustable lift height: 3-4" for non-Sasquatch or 2-3" for Sasquatch-equipped models
• Remote reservoirs maintain cooler operating temperatures for consistent damping
• Increases wheel travel up to 11.5 inches for improved articulation
• 7/8" diameter induction-hardened chrome-plated shafts
• Corrosion-resistant CAD-plated shock bodies with 6061 aircraft-grade aluminum components
• FK rod end bearings minimize deflection and extend service life
• Fully rebuildable and re-tunable design
• Manufacturer Part Number: 48700

Fits 2021-2023 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, and Wildtrak.

The ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir (IR) rear coilovers are engineered to enhance the suspension performance of the 2021-2023 Ford Bronco. This kit features heavy-rate, progressive dual-rate coil springs designed specifically for vehicles frequently carrying additional weight from bumpers, winches, or overland gear. The shaft-up orientation and vehicle-specific valving maximize rear wheel travel up to 14 inches while providing adjustable lift heights to accommodate larger tire packages.

Constructed with 2.5-inch diameter CAD-plated shock bodies and 7/8-inch induction-hardened shafts, these coilovers utilize 6061 aircraft-grade aluminum CNC-machined components for long-term durability. The 100% bolt-on design ensures a straightforward installation without the need for drilling or welding.

• Manufacturer Part Number: 48613
• Adjustable Rear Lift Height: 2-3" (Non-Sasquatch) or 1.25-2.25" (Sasquatch)
• Shock Body: 2.5" diameter CAD-plated steel
• Shaft: 7/8" diameter induction-hardened chrome plated
• Springs: ICON-engineered heavy-rate dual-rate progressive springs
• Bearings: FK rod end bearings for minimal deflection
• Installation: 100% Bolt-on; no cutting or welding required
• Serviceability: Fully rebuildable and re-tunable design

Fits select 2021-2023 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, and Wildtrak.

The ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir rear coilover shocks provide a significant suspension upgrade for the 2021-2023 Ford Bronco. These adjustable coilovers are designed to increase wheel travel up to 14 inches and improve ride quality across varied terrain. On 4-door Broncos without the Sasquatch package, these units provide 2-3 inches of rear lift; on Sasquatch-equipped 4-door models, they offer 1.25-2.25 inches of lift, facilitating the fitment of larger wheel and tire combinations.

Each coilover features a 2.5-inch diameter shock body and a 7/8-inch induction-hardened chrome-plated shaft for increased oil volume and thermal stability. The assembly utilizes ICON-engineered progressive triple-rate coil springs, which provide a compliant ride at standard height while increasing resistance during deep compression to prevent bottoming out. These coilovers are mounted in a shaft-up orientation to reduce unsprung weight and are fully rebuildable and re-tunable for long-term service.

• Adjustable rear lift height: 2-3" (Non-Sasquatch) or 1.25-2.25" (Sasquatch)
• Large 2.5" diameter CAD plated shock bodies for corrosion resistance
• 7/8" diameter induction hardened chrome plated shafts
• 6061 aircraft-grade aluminum CNC machined components
• FK rod end bearings for maximum longevity and minimal deflection
• Progressive triple-rate coil springs for optimized ride and bottom-out control
• 100% bolt-on installation; no drilling, cutting, or welding required
• Fully rebuildable and re-tunable design
• Manufacturer Part Number: 48610