Fits select 2003-2009 Toyota 4Runner, FJ Cruiser, and Lexus GX470 (Base / Limited / Sport / SR5 / TRD / Trail Teams).

The ICON K53052T Stage 2 Suspension System is engineered for owners seeking a significant upgrade in ride quality and wheel travel without sacrificing long-term durability. This system features ICON's patented Delta Joint tubular upper control arms. The Delta Joint bridge the gap between high-performance uniballs and standard ball joints, utilizing a zinc-plated, greaseable housing with a tough grease seal to protect against corrosion and debris while providing the high angularity required for extended travel suspension.

This bolt-on kit includes vehicle-specific tuned extended travel front coilovers and 2.0 Aluminum Series rear internal reservoir shocks. The front coilovers utilize a CAD-plated shock body with a 7/8" shaft, while the rear shocks feature 5/8" shafts and 6061 aircraft-grade CNC machined components. This setup provides 0-3.5" of adjustable front lift height, allowing for larger tire fitment and improved off-road clearance.

• Adjustable coilovers provide 0-3.5" of front lift height
• Tubular UCAs with patented Delta Joint for superior strength and articulation
• Extended travel front coilovers for increased droop travel
• 2.0 Aluminum Series rear internal reservoir shocks for consistent damping
• Corrosion-resistant CAD plated shock bodies with 7/8" shafts
• FK Rod End bearings for maximum longevity and minimal deflection
• 100% bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K53052T

Fits 2003-2009 Toyota 4Runner, FJ Cruiser, and Lexus GX470. This entry-level suspension system significantly improves handling by reducing body roll and enhancing damping performance across both on-road and off-road terrain.

The ICON Stage 1 system features 2.5 Series front coilover shocks with a vehicle-specific tune, providing a height-adjustable lift of 0 to 3.5 inches. These are paired with 2.0 Aluminum Series rear Internal Floating Piston (IFP) shocks and 2-inch lift rear coil springs for a balanced, level stance and consistent front-to-rear damping. This bolt-on kit utilizes 6061 aircraft-grade aluminum components and high-grade FK Rod End bearings to ensure maximum longevity and minimal deflection.

• Adjustable front coilovers provide 0-3.5 inches of lift height
• 2.5 Series front coilovers with corrosion-resistant CAD plated bodies and 7/8-inch shafts
• 2.0 Aluminum Series rear IFP shocks with 5/8-inch shafts
• 2-inch lift rear coil springs for improved load handling and ride quality
• CNC machined 6061 aircraft-grade aluminum components
• FK Rod End bearings for extended service life
• 100% Bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K53051

Vehicle Fitment:

• 2003-2009 Lexus GX470 Base
• 2003-2009 Toyota 4Runner (Limited, Sport, SR5)
• 2007-2009 Toyota FJ Cruiser (Base, Trail Teams Special Edition, TRD Special Edition)

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade).

The ICON Vehicle Dynamics Stage 8 suspension system is the ultimate performance upgrade for the 2007-2021 Toyota Tundra, providing 1-3 inches of lift height to accommodate larger wheel and tire packages. This comprehensive kit features vehicle-specific tuned 2.5 Series remote reservoir front coilovers paired with ICON billet upper control arms to significantly increase front-end droop travel. To optimize rear performance, the system includes RXT multi-rate leaf springs with three user-adjustable rates, allowing you to tune the suspension for varying bed loads and accessories like racks or roof-top tents.

Damping is handled by 2.5 Aluminum Series RXT remote reservoir rear shocks, which utilize a unique side-mount eyelet to maximize travel within the factory mounting points. The 10-inch reservoirs ensure consistent cooling and resist shock fade during aggressive off-road use. Constructed with 6061 aircraft-grade aluminum and 7/8-inch shafts, this bolt-on system provides professional-grade durability without the need for cutting or welding.

• Complete Stage 8 suspension system with 1-3" front lift height
• 2.5 Series front coilovers with remote reservoirs and Eibach springs
• Billet aluminum upper control arms for increased droop travel
• RXT multi-rate rear leaf springs with adjustable configurations
• 2.5 Aluminum Series RXT rear shocks with side-mount lower eyelets
• 10" aluminum reservoirs for increased oil volume and heat dissipation
• 7/8" shock shafts with corrosion-resistant CAD plating
• FK Rod End bearings for maximum longevity and minimal deflection
• CNC machined 6061 aircraft-grade aluminum components
• Fully rebuildable and revalveable shock absorbers
• MPN: K53028

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, Nightshade, Trail, and TRD Pro).

The ICON Stage 5 Suspension System is a comprehensive performance upgrade designed for the 2007-2021 Toyota Tundra, providing 1-3 inches of adjustable front lift height. This system significantly improves wheel travel and ride quality without compromising factory towing capacity. At the core of this kit are the tubular upper control arms featuring ICON’s patented Delta Joint. This heavy-duty, high-angle ball joint combines the extreme articulation of a uniball with the weather-sealed durability of a traditional ball joint, utilizing a zinc-plated housing and a tough grease seal to resist corrosion and contaminants.

For superior damping and heat dissipation, this system includes 2.5 Aluminum Series rear shocks with one-piece impact-extruded cylinders and vehicle-specific valving. The front coilovers feature CAD-plated bodies and 7/8-inch polished chrome shafts for maximum strength. This 100% bolt-on system requires no cutting or welding, making it a straightforward installation for those seeking professional-grade off-road performance and daily-driver reliability.

• Adjustable front coilovers provide 1-3 inches of lift height
• Tubular upper control arms with patented greaseable Delta Joints
• 2.5 Aluminum Series rear shocks with 7/8-inch shafts
• Rear expansion pack provides 1.5 inches of lift and improved progression
• CNC-machined 6061 aircraft-grade aluminum components
• FK rod end bearings for reduced deflection and extended service life
• Corrosion-resistant CAD-plated shock bodies
• Complete 100% bolt-on installation
• Manufacturer Part Number: K53025T

Fits 2007-2021 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The ICON Stage 5 Suspension System for the 2007-2021 Toyota Tundra is a comprehensive handling upgrade designed to increase wheel travel and ride quality without compromising towing capacity. This system features ICON’s billet aluminum upper control arms equipped with the patented Delta Joint. The Delta Joint is a heavy-duty, high-angle ball joint that combines the durability of a sealed joint with the performance of a traditional uniball, utilizing a zinc-plated housing and a robust grease seal to protect internal components from road grime and the elements.

This 100% bolt-on kit includes vehicle-specific tuned 2.5 Aluminum Series front coilovers and piggyback rear shocks. The front coilovers offer adjustable lift heights from 1 to 3 inches and feature corrosion-resistant CAD-plated bodies with 7/8-inch shafts. To enhance rear-end performance and level the stance, a rear expansion pack is included to provide 1.5 inches of lift and improved articulation.

• Adjustable coilovers provide 1-3" of front lift height
• Billet 6061 aircraft-grade aluminum CNC machined upper control arms
• Patented Delta Joint for high-angle articulation and long-term durability
• 2.5 Aluminum Series piggyback rear shocks with impact-extruded bodies
• Heavy-duty 7/8" polished chrome shock shafts
• FK rod end bearings for extended service life and minimal deflection
• Rear expansion spring pack for 1.5" of lift and better ride quality
• Complete bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K53025

Fits select 2007-2021 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The ICON Vehicle Dynamics Stage 4 Suspension System is engineered for drivers seeking a significant increase in wheel travel and damping performance. This comprehensive kit balances off-road capability with refined on-road ride quality, utilizing vehicle-specific valving to optimize the Tundra chassis. The front coilovers provide 1-3 inches of adjustable lift, allowing for larger wheel and tire combinations while improving heat dissipation through remote reservoirs.

In the rear, this system upgrades the factory configuration with 2.5 Aluminum Series piggyback shocks and an expansion pack that provides 1.5 inches of lift for better ride quality. The high-quality construction features 6061 aircraft-grade aluminum and CAD-plated shock bodies for long-term corrosion resistance in harsh environments.

• Front coilovers adjustable from 1-3" of lift height
• 2.5" remote reservoir front shocks for superior cooling and performance
• Rear 2.5 Aluminum Series piggyback shocks with 7/8" shafts
• Rear expansion leaf pack for 1.5" lift and improved ride quality
• 6061 Aircraft-grade aluminum CNC machined components
• FK rod end bearings for maximum longevity and minimal deflection
• Corrosion-resistant CAD plated coilover shock bodies
• 100% Bolt-on installation – no cutting, drilling, or welding required
• Manufacturer Part Number: K53024

Fits 2007-2021 Toyota Tundra models (including Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Nightshade, and Trail).

The ICON Vehicle Dynamics Stage 3 suspension system is engineered for drivers seeking maximum performance, increased wheel travel, and enhanced damping for both on-road and off-road use. This system provides an adjustable front lift height of 1-3 inches, allowing for the fitment of larger, more aggressive wheel and tire combinations without compromising the vehicle's factory towing capacity.

The front suspension features vehicle-specific tuned 2.5-inch coilover shocks with internal reservoirs and CAD-plated bodies for superior corrosion resistance. These coilovers utilize heavy-duty 7/8-inch shafts and FK rod end bearings for extended longevity and minimal deflection. The rear is equipped with 2.5 Aluminum Series VS Smooth Body shocks featuring impact-extruded aluminum cylinders for excellent cooling, paired with a rear expansion pack that provides 1.5 inches of lift and improved ride quality.

• Adjustable coilovers provide 1-3 inches of front lift height
• 2.5-inch diameter shock bodies for increased oil volume and damping control
• CAD-plated coilover bodies with 7/8-inch shafts for durability
• Rear 2.5 Aluminum Series shocks with impact-extruded aluminum cylinders
• Rear expansion pack for 1.5 inches of rear lift
• 6061 aircraft-grade aluminum CNC-machined components
• FK rod end bearings for maximum performance and longevity
• 100% bolt-on system; no drilling, cutting, or welding required
• Manufacturer Part Number: K53023

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade).

The ICON Vehicle Dynamics Stage 2 suspension system is engineered to provide the serious Toyota Tundra owner with increased wheel travel and significantly improved damping capability. This kit centers around vehicle-specific 2.5-inch diameter front coilovers, which are height-adjustable from 1 to 3 inches. These coilovers feature internal reservoirs for superior cooling and are paired with 6061 aircraft-grade aluminum components to handle aggressive off-road use without compromising street manners. The 100% bolt-on design ensures a straightforward installation without the need for drilling, cutting, or welding.

For the rear, ICON includes 2.0 VS Aluminum Series monotube shocks with vehicle-specific valving and a 1.5-inch lift rear expansion pack. This combination balances the truck's performance from front to rear, enhancing ride quality while maintaining factory towing capacity. Built with high-grade materials like FK rod end bearings and corrosion-resistant CAD-plated shock bodies, this system (MPN K53022) is designed for long-term durability in harsh environments.

• Adjustable front lift height: 1-3 inches
• 2.5-inch front coilovers with CAD-plated bodies and 7/8-inch shafts
• 2.0 VS Aluminum Series rear shocks with 5/8-inch polished nitro steel shafts
• 1.5-inch lift rear expansion pack for improved ride dynamics
• 6061 CNC machined aluminum components
• FK rod end bearings for maximum longevity and minimal deflection
• Complete bolt-on installation; no vehicle modification required
• Retains factory towing capacity

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade).

The ICON Stage 1 suspension system for the 2007-2021 Toyota Tundra is engineered to increase wheel travel and damping performance for superior ride quality both on and off the road. This system features vehicle-specific valving and height-adjustable front coilovers that provide 1 to 3 inches of lift, accommodating larger wheel and tire combinations without affecting factory towing capacity.

The front suspension utilizes 2.5-inch diameter coilover shocks with internal reservoirs for efficient cooling during extended use. These units are constructed with corrosion-resistant CAD-plated shock bodies, 7/8-inch shafts, and FK rod end bearings for maximum longevity. The rear is balanced with ICON 2.0 VS Aluminum Series shocks, featuring 5/8-inch polished chrome shafts and CNC-machined 6061 aircraft-grade aluminum components for precise performance.

• Adjustable lift height from 1-3 inches
• Vehicle-specific tuned 2.5-inch front coilovers with internal reservoirs
• 2.0 VS Aluminum Series rear shocks with 5/8-inch polished chrome shafts
• Corrosion-resistant CAD plated coilover bodies with 7/8-inch shafts
• Precision CNC machined 6061 aircraft-grade aluminum components
• FK rod end bearings for reduced deflection and extended service life
• Complete bolt-on system requires no drilling, cutting, or welding
• Manufacturer Part Number: K53021

Fits 1995-2004 Toyota Tacoma (Base, DLX, Limited, Pre Runner, S-Runner, SR5).

The ICON Vehicle Dynamics Stage 4 suspension system is engineered for the serious driver looking to maximize wheel travel and damping performance on the 1995-2004 Toyota Tacoma. This comprehensive system features vehicle-specific tuned 2.5 Series front coilovers with remote reservoirs for superior cooling and consistent damping during aggressive off-road use. These coilovers provide 0-3" of lift height, allowing for larger wheel and tire fitments while improving ride quality over stock components.

This kit includes ICON's tubular upper control arms (UCAs), equipped with the patented Delta Joint. These arms provide the necessary alignment correction and increased droop travel required when running extended travel shocks. For the rear, the system utilizes a 1.5" Add-A-Leaf kit that replaces the factory overload leaf, effectively softening the spring rate for a more compliant ride. Damping is handled by 2.0 Aluminum Series remote reservoir rear shocks, specifically valved to balance the Tacoma's performance across all terrains.

• ICON MPN: K53014
• 2.5 Series front coilovers with remote reservoirs and 7/8" shafts
• Tubular UCAs featuring the patented Delta Joint (U.S. Pat. 10,731,700)
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Corrosion-resistant CAD plated coilover bodies with 6061 CNC machined components
• FK Rod End bearings for maximum durability and reduced deflection
• Rear Add-A-Leaf kit provides 1.5" of lift and improved spring rate
• 100% bolt-on installation; no cutting or welding required

Fits 1995-2004 Toyota Tacoma Base, DLX, Limited, Pre Runner, S-Runner, and SR5.

The ICON Vehicle Dynamics Stage 3 suspension system is engineered for Toyota Tacoma owners demanding increased wheel travel and damping performance. This system provides 0-3" of adjustable front lift height, allowing for larger wheel and tire combinations while significantly improving ride quality both on and off-road. ICON engineers focused on vehicle-specific tuning to ensure superior control and damping.

The front suspension features 2.5-inch coilover shocks with remote reservoirs for exceptional cooling properties, paired with ICON-engineered Eibach coil springs. Construction includes 6061 aircraft-grade aluminum CNC-machined components and CAD-plated shock bodies with 7/8" hardened chrome shafts. In the rear, ICON 2.0 Aluminum Series remote reservoir shocks utilize specific valving to balance performance across the chassis.

• Front coilovers adjustable from 0-3" of lift height
• 2.5" front remote reservoir shocks with 7/8" hardened chrome shafts
• 2.0" aluminum body rear remote reservoir shocks with 5/8" polished chrome steel shafts
• Corrosion-resistant CAD plated coilover shock bodies
• FK rod end bearings for extended longevity and minimal deflection
• 100% bolt-on installation; no drilling, cutting, or welding required
• 6061 CNC machined aluminum components
• Manufacturer Part Number: K53013

Fits 1995-2004 Toyota Tacoma models including Base, DLX, Limited, Pre Runner, S-Runner, and SR5.

The ICON Vehicle Dynamics Stage 2 suspension system for the 1995-2004 Toyota Tacoma is engineered to increase wheel travel and damping performance for better vehicle control both on and off-road. This system features 2.5-inch diameter adjustable coilovers that provide 0-3 inches of lift height, allowing clearance for larger, more aggressive wheel and tire combinations. The coilovers are built with corrosion-resistant CAD-plated bodies and 7/8-inch hardened chrome shafts for maximum durability.

To balance the truck from front to rear, this kit includes ICON 2.0 Aluminum Series rear shocks featuring vehicle-specific valving. All components are designed for a 100% bolt-on installation, requiring no drilling, cutting, or welding to the factory chassis.

• Adjustable 0-3" lift height for increased ground clearance
• 2.5" front coilovers with internal reservoirs and Eibach coil springs
• 2.0 Aluminum Series rear shocks with 5/8" polished chrome shafts
• 6061 aircraft-grade aluminum CNC-machined components
• FK rod end bearings for minimal deflection and extended service life
• Corrosion-resistant CAD-plated coilover bodies with 7/8" hardened shafts
• 100% bolt-on system ensures factory-quality fitment
• Manufacturer Part Number: K53012

Fits 1995-2004 Toyota Tacoma models including Base, DLX, Limited, Pre Runner, S-Runner, and SR5.

The ICON Vehicle Dynamics Stage 1 Suspension System (MPN: K53011) is engineered to significantly increase wheel travel and damping performance for the first-generation Tacoma. This system features vehicle-specific tuned 2.5-inch front coilovers with internal reservoirs for consistent cooling and ICON-engineered Eibach coil springs. These coilovers provide 0-3 inches of adjustable lift height, allowing for larger wheel and tire packages without compromising ride quality. The rear is supported by ICON 2.0 Aluminum Series monotube shocks, custom-valved to balance the truck's front-to-rear dynamics.

• Adjustable 0-3" lift height for improved ground clearance and tire fitment
• 2.5" coilover shock bodies with 7/8" hardened chrome shafts for durability
• 2.0 aluminum body rear shocks with 5/8" polished chrome plated steel shafts
• 100% bolt-on installation; no drilling, cutting, or welding required
• 6061 CNC machined aircraft-grade aluminum components
• FK rod end bearings for extended longevity and reduced deflection
• Corrosion-resistant CAD plated shock bodies

Fits 2005-2023 Toyota Tacoma models including Base, PreRunner, SR, SR5, TRD Off-Road, TRD Sport, TRD Pro, and X-Runner.

The ICON Stage 9 suspension system is the ultimate performance upgrade for the 2005-2023 Toyota Tacoma, engineered for drivers who demand maximum damping control and suspension travel. This system features 2.5 Series Extended Travel remote reservoir front coilovers and 2.5 Aluminum Series remote reservoir rear shocks, both equipped with ICON’s Compression Damping Control Valve (CDCV). This allows for 10 precise settings of damping adjustment to tune your ride for any terrain or cargo load.

Up front, the coilovers provide 0-3.5" of lift (2005-2015 models) or 0-2.75" (2016-2023 models) while working in tandem with ICON billet aluminum upper control arms. These UCAs feature the patented Delta Joint, corrected geometry for improved caster and camber, and on-vehicle adjustability. In the rear, the RXT multi-rate leaf springs offer three user-adjustable spring rates to handle everything from unloaded daily driving to fully outfitted overland builds with heavy bed racks and tents.

• MPN: K53009
• Front Lift Height: 0-3.5" (2005-2015) / 0-2.75" (2016-2023)
• Shocks: 2.5 Series Remote Reservoir with CDCV (10 levels of damping adjustment)
• Upper Control Arms: CNC-machined 6061 billet aluminum with patented Delta Joint
• Rear Springs: RXT Multi-Rate Leaf Springs with 3 adjustable rate configurations
• Shock Construction: CAD plated coilover bodies and anodized aluminum rear bodies with 7/8" shafts
• Hardware: FK Rod End bearings and 6061 aircraft-grade aluminum components
• Installation: Bolt-on design fits factory mounting locations

The ICON Stage 8 Suspension System is a complete performance solution designed for the 2005-2023 Toyota Tacoma (including Pre Runner, SR5, TRD Off-Road, and TRD Pro models). This system is centered around vehicle-specific 2.5 Series Extended Travel coilovers with remote reservoirs for superior cooling and consistent damping during hard use. These coilovers provide a lift height range of 0-3.5 inches for 2005-2015 models and 0-2.75 inches for 2016-2023 models, allowing for larger wheel and tire combinations.

To optimize suspension geometry and increase droop travel, this kit includes ICON tubular upper control arms featuring the patented Delta Joint. The rear is upgraded with ICON RXT multi-rate leaf springs, offering three user-adjustable spring rates to account for varied bed loads, from empty configurations to heavy overland builds with racks and rooftop tents. The kit is rounded out with unique 2.5 Aluminum Series remote reservoir RXT rear shocks, utilizing a side-mount eyelet to maximize travel while bolting into factory locations.

• Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD Pro, X-Runner, and Trail)
• 2.5 Series front coilovers with remote reservoirs and CAD plated bodies
• ICON Tubular UCAs with patented Delta Joint for improved caster and durability
• RXT Multi-Rate Leaf Springs with 3 adjustable spring rates
• 2.5 Aluminum Series RXT rear shocks with 7/8-inch shafts and 10-inch remote reservoirs
• FK Rod End bearings for minimal deflection and long-term reliability
• 6061 aircraft-grade aluminum CNC-machined components
• Manufacturer Part Number: K53008T

Fits 2005-2023 Toyota Tacoma models including Base, SR, SR5, TRD Off-Road, TRD Sport, TRD Pro, Limited, Pre Runner, Trail, and X-Runner.

The ICON Stage 8 Suspension System is a comprehensive overhaul designed for drivers demanding peak performance and durability. This system centers on vehicle-specific tuned 2.5 Series Extended Travel remote reservoir coilovers, providing superior cooling and height adjustability (0-3.5" for 2005-2015 models; 0-2.75" for 2016-2023 models). Paired with ICON billet aluminum upper control arms (UCAs), these coilovers deliver increased droop travel and corrected front-end geometry. The UCAs feature the patented Delta Joint, combining the durability of a ball joint with the performance of a traditional uniball.

For the rear, the Stage 8 system utilizes RXT multi-rate leaf springs and 2.5 Aluminum Series remote reservoir shocks. The leaf springs offer three user-adjustable spring rates to accommodate varying loads, from unloaded daily drivers to fully outfitted overland rigs. The unique side-mount eyelet on the rear shocks allows for up to 20% increased travel while retaining factory mounting locations.

• Part Number: K53008
• 2.5 Series front coilovers with remote reservoirs and 7/8" shafts
• 2.5 Aluminum Series RXT rear shocks with 10" remote reservoirs
• CNC machined 6061 aircraft-grade billet aluminum UCAs with Delta Joint
• RXT multi-rate leaf springs with adjustable spring rates (+10-20%)
• FK Rod End bearings for minimal deflection and maximum longevity
• CAD plated, corrosion-resistant coilover bodies

Fits 2005-2023 Toyota Tacoma (Base, SR, SR5, TRD Pro, TRD Off-Road, TRD Sport, Pre Runner, and Trail models).

The ICON Vehicle Dynamics Stage 4 Suspension System is engineered for drivers demanding superior damping and increased wheel travel for both technical off-road use and daily street performance. This comprehensive kit features vehicle-specific tuned 2.5 Series Extended Travel front coilovers with remote reservoirs for maximum cooling during hard use. These coilovers are height-adjustable, providing 0-3.5 inches of lift for 2005-2015 models and 0-2.75 inches for 2016-2023 models.

To correct front-end geometry and increase droop travel, this system includes ICON tubular upper control arms (UCAs). These arms feature the patented, serviceable Delta Joint, which combines the durability of a heavy-duty ball joint with the performance range of a uniball. In the rear, 2.0 Aluminum Series remote reservoir shocks work in tandem with a 1.5-inch lift Add-A-Leaf kit to provide a compliant ride and balanced handling.

• 2.5 Series front coilovers with remote reservoirs and 7/8-inch shafts
• 2.0 Aluminum Series rear shocks with remote reservoirs and 5/8-inch shafts
• Tubular UCAs with patented Delta Joints for improved caster and suspension clearance
• Rear Add-A-Leaf kit replaces factory overload leaf for a 10% more compliant spring rate
• Corrosion-resistant CAD-plated coilover bodies and 6061 CNC-machined aluminum components
• FK Rod End bearings for maximum durability and minimal deflection
• 100% bolt-on installation; no cutting or welding required for factory mounting points
• Manufacturer Part Number: K53004T

Fits 2005-2023 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, and X-Runner).

The ICON Vehicle Dynamics Stage 4 suspension system is engineered for the serious driver demanding maximum wheel travel and damping ability. This comprehensive bolt-on kit replaces the factory components with vehicle-specific tuned 2.5 Series front coilovers and 2.0 Aluminum Series rear shocks. The front coilovers feature remote reservoirs for superior cooling and are height adjustable, providing 0-3.5" of lift on 2005-2015 models and 0-2.75" of lift on 2016-2023 models. This extra clearance allows for more aggressive wheel and tire combinations while improving overall ride quality.

A centerpiece of the Stage 4 system is the ICON billet aluminum upper control arm (UCA) kit. These arms are CNC machined from 6061 aircraft-grade aluminum and feature the patented Delta Joint. This serviceable high-angle ball joint provides the durability of a standard ball joint with the performance of a uniball, allowing for full suspension cycling without binding. For the rear, an Add-A-Leaf kit replaces the factory overload leaves to lower the rear spring rate by 10%, delivering a more compliant ride and 1.5" of lift.

• ICON 2.5 Series front coilovers with remote reservoirs and 7/8" shafts
• ICON 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Billet aluminum UCAs with patented Delta Joint (U.S. Pat. 10,731,700)
• 6061 aircraft grade aluminum CNC machined components
• Corrosion-resistant CAD plated coilover shock bodies
• FK Rod End bearings for minimal deflection and longevity
• Rear Add-A-Leaf kit for 1.5" rear lift and improved compliance
• Manufacturer Part Number: K53004

Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, X-Runner, Trail, Limited).

The ICON Vehicle Dynamics Stage 3 suspension system is engineered to provide superior ride quality and wheel travel for the serious off-road enthusiast. This system features vehicle-specific tuned 2.5-inch Extended Travel coilover shocks in the front, offering adjustable lift heights of 0-3.5" for 2005-2015 models and 0-2.75" for 2016-2023 models. These coilovers utilize CAD-plated shock bodies and 7/8-inch shafts for high-strength durability. To maximize the benefit of the extended travel coilovers, the included tubular upper control arms (UCAs) feature the patented Delta Joint, which provides the range of motion of a uniball with the weather resistance of a sealed ball joint, correcting front-end geometry and increasing caster.

For the rear, this system includes 2.0 Aluminum Series remote reservoir shocks with 5/8-inch shafts to provide consistent damping under heavy use. The rear Add-A-Leaf kit replaces the factory overload leaf, resulting in a 1.5-inch lift and a 10% lower spring rate for a more compliant, controlled ride. This bolt-on kit requires no cutting or welding for installation.

• Manufacturer Part Number: K53003T
• 2.5-inch Extended Travel coilover shocks with internal reservoirs
• Tubular UCAs with patented Delta Joint (U.S. Pat. 10,731,700)
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8-inch shafts
• Rear Add-A-Leaf kit providing 1.5-inch lift over stock
• CNC machined 6061 aircraft-grade aluminum components
• FK Rod End bearings for minimal deflection and extended longevity
• Corrosion-resistant CAD plated coilover shock bodies with 7/8-inch shafts

Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, X-Runner, SR, SR5, Limited, TRD Sport, TRD Off-Road, and TRD Pro). This comprehensive suspension upgrade is designed to improve wheel travel, damping performance, and vehicle control for both daily driving and off-road use.

The ICON Stage 3 system features 2.5-inch Extended Travel coilover shocks with vehicle-specific tuning and an internal reservoir for effective cooling. These coilovers allow for height adjustment from 0-3.5 inches of lift on 2005-2015 models and 0-2.75 inches on 2016-2023 models. To correct front-end geometry and increase droop travel, the kit includes CNC-machined 6061 aircraft-grade billet aluminum upper control arms (UCAs). These UCAs feature the patented Delta Joint, a serviceable high-angle joint that provides the durability of a uniball with the weather resistance of a ball joint. In the rear, a 1.5-inch Add-A-Leaf kit replaces the factory overload leaves to soften the spring rate by 10% for better compliance, while 2.0 Aluminum Series remote reservoir shocks provide balanced damping across the chassis.

• Manufacturer Part Number: K53003
• Adjustable front lift height: 0-3.5" (2005-2015) or 0-2.75" (2016-2023)
• Billet aluminum UCAs with caster/camber adjustment and Delta Joint
• 2.5" coilover shocks with CAD plated bodies and 7/8" shafts
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Rear 1.5" Add-A-Leaf kit for improved ride quality
• FK Rod End bearings for durability and reduced deflection
• 6061 aircraft-grade aluminum CNC-machined components
• 100% bolt-on installation; no cutting or welding required

Fits 2005-2023 Toyota Tacoma (Base, PreRunner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Limited, and X-Runner).

This ICON Vehicle Dynamics Stage 1 suspension system is engineered to enhance wheel travel and damping performance for both on-road stability and off-road capability. The system features 2.5-inch diameter front coilovers and 2.0 Aluminum Series monotube rear shocks, providing a balanced, vehicle-specific valving profile that significantly improves ride quality over factory components. The adjustable front coilovers allow for 0-3.5 inches of lift on 2005-2015 models and 0-2.75 inches on 2016-2023 models, accommodating larger tire fitments and more aggressive wheel combinations.

• Front Shocks: 2.5" adjustable coilovers with 7/8" nitro-steel shafts and internal reservoirs
• Rear Shocks: 2.0 Aluminum Series monotube shocks with 5/8" shafts
• Coil Springs: ICON-engineered Eibach springs for superior vehicle feel through the travel range
• Materials: 6061 CNC-machined aluminum components and corrosion-resistant CAD-plated shock bodies
• Bearings: FK Rod End bearings for extended service life and minimal deflection
• Fitment: 100% Bolt-on system requiring no cutting or welding for installation
• Manufacturer Part Number: K53001

Fits 2021-2023 Ford Bronco (all submodels including Sasquatch Package 4-door). This ICON Vehicle Dynamics Stage 3 suspension system provides a complete performance overhaul for your Bronco, engineered to maximize wheel travel and improve ride quality across technical off-road terrain and highway driving.

This comprehensive kit features ICON 2.5 Series internal reservoir coilover shocks, custom-valved for the Bronco platform. These coilovers are height-adjustable, offering 2-3” of front lift and 1.25-2.25” of rear lift on Sasquatch-equipped 4-door models. To support the increased travel, the kit includes tubular upper control arms (UCAs) featuring the patented Delta Joint PRO, which provides up to 90 degrees of articulation and corrects caster for proper alignment.

The rear suspension utilizes a shaft-up orientation and progressive dual-rate coil springs, specifically designed to handle additional gear and equipment weight without sacrificing damping performance. The system is 100% bolt-on, utilizing 6061 aircraft-grade aluminum and CAD-plated shock bodies for maximum durability.

• Adjustable lift height: 2-3” front / 1.25-2.25” rear
• Suspension travel: 11.5” front / 14” rear (with 35” tires)
• Patented Delta Joint PRO UCAs for 90-degree articulation and caster correction
• 2.5 Series internal reservoir shocks with 7/8” diameter shafts
• Corrosion-resistant CAD-plated coilover bodies
• CNC-machined 6061 aluminum components and alloy lower bar pins
• PTFE-lined spherical bearings for long-term reliability
• 100% bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K40013TX

Fits 2019-2023 Ram 1500 (Big Horn, HFE, Laramie, Limited, Lone Star, Rebel, and Tradesman trims).

The ICON Vehicle Dynamics Stage 2 suspension system is engineered to provide the 2019-2023 Ram 1500 with increased wheel travel and superior damping control. This comprehensive kit addresses the front end with vehicle-specific tuned 2.5-inch diameter coilovers featuring internal reservoirs and CAD-plated shock bodies. These coilovers are height-adjustable from 2-3 inches of front lift over stock, allowing for larger wheel and tire combinations while improving off-road performance through increased travel and 7/8-inch shafts.

To maintain proper alignment and durability at increased lift heights, this system includes tubular Upper Control Arms (UCAs) equipped with ICON’s patented Delta Joint ball joints. These UCAs increase caster over stock and provide the range of motion necessary for high-performance use. The rear is supported by dual-rate coil springs providing 1.5 inches of lift, paired with 2.0 Aluminum Series internal reservoir shocks with 5/8-inch polished shafts for balanced valving and bottoming resistance.

• Front coilovers adjustable for 2-3" of lift; 2.5" CAD-plated bodies with 7/8" shafts
• Tubular Upper Control Arms with Delta Joint ball joints for added strength and alignment range
• Dual-rate rear coil springs provide 1.5" lift and improved ride quality
• 2.0 Aluminum Series rear shocks with 5/8" polished shafts and internal reservoirs
• 6061 aircraft-grade aluminum CNC machined components
• FK rod end bearings for maximum longevity and minimal deflection
• 100% bolt-on installation; no drilling, cutting, or welding required
• Manufacturer Part Number: K213112T

Fits 2019-2023 Ram 1500 (Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Rebel, Special Service, and Tradesman).

The ICON Vehicle Dynamics Stage 2 suspension system is engineered to provide increased wheel travel and superior damping for the 2019-2023 Ram 1500. This system features vehicle-specific tuned 2.5-inch diameter coilover shocks with internal reservoirs and ICON-engineered coil springs. These coilovers are height-adjustable from 2-3 inches of front lift, allowing for larger wheel and tire combinations while improving front wheel travel. The included billet 6061 aluminum upper control arms (UCAs) feature ICON’s Delta Joint, providing the strength of a uniball with the durability of a sealed ball joint, while allowing for on-vehicle caster and camber adjustment to maintain proper alignment.

In the rear, dual-rate coil springs provide 1.5 inches of lift, delivering a level stance and a compliant ride without sacrificing bottoming resistance. The system is completed by ICON 2.0 Aluminum Series internal reservoir rear shocks, which balance the truck’s performance from front to rear. This 100% bolt-on kit requires no drilling, cutting, or welding for a straightforward installation.

• Adjustable 2.5” CAD-plated front coilovers with 7/8” shafts
• Billet 6061 aircraft-grade aluminum UCAs with Delta Joint ball joints
• 2.0 Aluminum Series rear shocks with 5/8” polished shafts
• Dual-rate rear coil springs for 1.5” of lift and improved ride quality
• FK rod end bearings for extended longevity and minimal deflection
• Provides 2-3” of front lift and 1.5” of rear lift
• Complete bolt-on system with no permanent vehicle modifications required
• Manufacturer Part Number: K213112

Fits select 2019-2023 Ram 1500 models, including Big Horn, HFE, Laramie, Limited, Longhorn, Rebel, and Tradesman.

The ICON Vehicle Dynamics Stage 1 suspension system (K213111T) is engineered to significantly improve the ride quality and off-road capability of the 2019-2023 Ram 1500. This system features vehicle-specific tuned 2.5-inch coilover shocks that provide 2-3 inches of front lift height, allowing for larger wheel and tire combinations. The included tubular upper control arms are equipped with ICON’s patented Delta Joint, which provides the durability of a uni-ball with the weather-sealed longevity of a ball joint, while correcting alignment geometry for the increased lift height.

To balance the vehicle's performance, the kit includes 2.0 Aluminum Series internal reservoir rear shocks. These shocks utilize vehicle-specific valving to ensure consistent damping across various terrains without compromising factory towing capacity. The entire system is a 100% bolt-on solution, requiring no cutting or welding for installation.

• Adjustable front coilovers yield 2-3" of lift height over stock
• Tubular Upper Control Arms with Delta Joint ball joints for increased strength and alignment range
• Corrosion-resistant 2.5" diameter CAD plated coilover bodies with 7/8" shafts
• 2.0 Aluminum Series rear internal reservoir shocks with 5/8" polished shafts
• 6061 Aircraft grade aluminum CNC machined components
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on installation — no drilling, cutting, or welding required
• Manufacturer Part Number: K213111T

Fits 2019-2023 Ram 1500 models (Big Horn, HFE, Laramie, Limited, Longhorn, Rebel, Tradesman).

The ICON Vehicle Dynamics Stage 1 suspension system for the 2019-2023 Ram 1500 is engineered to increase wheel travel and damping performance for improved vehicle control both on and off-road. This system features vehicle-specific tuned 2.5-inch front coilover shocks with internal reservoirs for consistent cooling and adjustable ride height to provide 2-3 inches of front lift. This additional clearance allows for more aggressive wheel and tire combinations while improving front-end geometry.

A critical upgrade in this kit is the inclusion of billet aluminum upper control arms (UCAs). These arms feature ICON's patented Delta Joint, providing the durability of a ball joint with the performance of a traditional uniball. These UCAs allow for on-vehicle caster and camber adjustment to maintain factory alignment specs at the new lift height. To balance the truck, the kit includes 2.0 Aluminum Series rear shocks with vehicle-specific valving and 5/8-inch polished shafts.

• Billet 6061 aircraft-grade aluminum upper control arms with Delta Joints
• 2.5-inch diameter CAD-plated coilover bodies with 7/8-inch shafts
• 2.0 Aluminum Series rear internal reservoir shocks with 5/8-inch shafts
• Adjustable front lift height from 2-3 inches over stock
• 100% bolt-on installation; no drilling, cutting, or welding required
• FK rod end bearings for maximum longevity and reduced deflection
• Maintains factory towing capacity while increasing wheel travel
• Manufacturer Part Number: K213111

Fits select 2019-2022 Ram 1500 2WD and 4WD models. The ICON Vehicle Dynamics Stage 2 suspension system is engineered to increase wheel travel and damping ability, providing superior vehicle control and ride quality for both on-road and off-road driving. This system features vehicle-specific tuned 2.5-inch front coilover shocks with internal reservoirs for exceptional cooling, paired with ICON-engineered coil springs that maintain a consistent feel through the entire range of travel.

To balance the truck from front to rear, this system includes 1.5-inch lift dual-rate rear coil springs and ICON 2.0 Aluminum Series monotube rear shocks. The front coilovers are height-adjustable from 0-1.5 inches of lift over stock, allowing for the installation of larger, more aggressive wheel and tire combinations. Constructed with CNC-machined 6061 aircraft-grade aluminum components, this kit is a 100% bolt-on solution that requires no drilling, cutting, or welding.

• Fits 2019-2022 Ram 1500 (2WD & 4WD)
• Adjustable 2.5" front coilovers provide 0-1.5" of lift height over stock
• Internal reservoir design for improved shock cooling and performance
• 1.5" lift dual-rate rear coil springs for enhanced ride quality
• ICON 2.0 Aluminum Series monotube rear shocks
• CNC-machined 6061 aircraft-grade aluminum components
• Shocks are fully rebuildable and revalvable
• Complete bolt-on installation—no cutting or drilling required
• Manufacturer Part Number: K213102

Fits select 2019-2022 Ram 1500 2WD and 4WD models including Big Horn, Laramie, Rebel, TRX, and Tradesman.

The ICON Vehicle Dynamics Stage 1 suspension system is engineered for the serious driver seeking improved wheel travel and damping performance. This system features vehicle-specific tuned 2.5-inch front coilovers with internal reservoirs for superior cooling and ICON-engineered coil springs. These coilovers provide 0-1.5 inches of adjustable lift height over stock, allowing for the fitment of larger, more aggressive wheel and tire combinations while maintaining a balanced ride.

To complement the front suspension, the kit includes ICON 2.0 Aluminum Series monotube rear shocks. These shocks utilize custom valving to deliver consistent control on and off-road. Constructed with 6061 aircraft-grade aluminum CNC-machined components, this system is a 100% bolt-on solution that requires no drilling, cutting, or welding for installation.

• Adjustable lift height: 0-1.5" over stock
• 2.5" diameter front coilovers with internal reservoirs
• 2.0 Aluminum Series monotube rear shocks
• 6061 CNC-machined aluminum components
• Shocks are fully rebuildable and revalvable
• 100% bolt-on installation; no vehicle modification required
• Manufacturer Part Number: K213101

Fits select 2009-2022 Dodge Ram 1500 and Ram 1500 Classic 4WD models.

The ICON Vehicle Dynamics Stage 2 suspension system (K213002) is engineered to significantly increase wheel travel and damping performance for both on-road comfort and off-road capability. This system features vehicle-specific tuned 2.5-inch coilover shocks equipped with internal reservoirs for enhanced cooling and ICON-engineered Eibach coil springs. These coilovers provide an adjustable lift height of 0.75 to 2.5 inches, allowing for the installation of larger, more aggressive wheel and tire combinations.

To balance the vehicle's performance, the Stage 2 kit includes ICON 2.0 Aluminum Series monotube rear shocks featuring vehicle-specific valving. The system is constructed using 6061 aircraft-grade aluminum CNC-machined components and high-strength alloy lower bar pins. Installation is a direct bolt-on process requiring no drilling or welding, and it maintains the factory towing capacity.

• Adjustable lift height from 0.75-2.5 inches
• ICON 2.5-inch front coilovers with internal reservoirs
• ICON 2.0 Aluminum Series rear monotube shocks
• 6061 CNC-machined aircraft-grade aluminum components
• FK rod end bearings for extended longevity and minimal deflection
• High-strength alloy CNC-machined lower bar pin
• Increases wheel travel and damping ability over stock
• Complete bolt-on installation; no drilling or welding required

Fits select 2009-2022 Dodge/Ram 1500 and 1500 Classic 4WD models.

The ICON Vehicle Dynamics Stage 1 suspension system is engineered to improve the ride quality and handling of your Ram 1500 both on-road and in demanding off-road conditions. This system increases front wheel travel and damping performance using vehicle-specific valving, providing superior control without sacrificing towing capacity. The front 2.5-inch coilovers feature internal reservoirs for enhanced cooling and are height-adjustable from 0.75 to 2.5 inches, allowing clearance for larger tire and wheel packages.

In the rear, the ICON 2.0 Aluminum Series monotube shocks are valved to match the front coilovers, ensuring a balanced feel across the chassis. Constructed with CNC-machined 6061 aircraft-grade aluminum components and FK rod end bearings, this kit is built for durability and precision with a 100% bolt-on design.

• Adjustable front lift height: 0.75-2.5"
• ICON-engineered Eibach coil springs for superior feel
• 2.0 Aluminum Series monotube rear shocks with vehicle-specific valving
• FK rod end bearings for extended longevity and minimal deflection
• 6061 Aircraft-grade aluminum CNC-machined components
• Bolt-on installation; no drilling or welding required
• Manufacturer Part Number: K213001