Fits 2015-2020 Ford F-150 2WD/4WD models, including XL, XLT, Lariat, King Ranch, Platinum, Limited, SSV, and Police Responder.

The Belltech Street Performance Coilover Kit (MPN: 1000SPC) is a comprehensive suspension solution designed to drastically improve the stance and handling of your truck without sacrificing ride quality. This kit replaces the front factory struts with height-adjustable coilovers, allowing you to dial in 1 to 3 inches of front drop. To balance the rear, a heavy-duty flip kit is included to achieve a significant 5.5-inch drop, creating a leveled, aggressive profile.

Each coilover features preset damping tuned specifically for the F-150 platform to eliminate excessive body roll and nose-dive. The rear of the vehicle is supported by Belltech Street Performance twin-tube shocks, which offer a larger internal volume for better heat dissipation and consistent damping performance during spirited driving or daily commuting.

• Front Lowering Range: 1.0" to 3.0"
• Rear Lowering: 5.5" via included flip kit
• Front coilovers arrive ready to install with preset damping
• Rear Street Performance twin-tube shock absorbers for optimized rebound and compression
• Maintains comfortable ride quality while increasing cornering stability
• Manufacturer Part Number: 1000SPC

Fits select 2015-2023 Volkswagen Golf, Golf R, Golf Alltrack, and Golf SportWagen models.

The AST Suspension 5100 Series Clubracing system is engineered for drivers who demand a precise balance between track-day performance and daily drivability. This 1-way adjustable monotube coilover kit provides dedicated control over rebound damping and ride height, allowing you to fine-tune your vehicle's handling for maximum grip and predictable response. Featuring a large-diameter piston design, these dampers offer superior control and heat dissipation under demanding conditions.

This comprehensive suspension solution includes high-performance coil springs, camber-adjustable front top mounts for precise alignment tuning, and solid rear top mounts. Designed for long-term reliability and professional-grade performance, the dampers are fully rebuildable and include necessary droplinks for a complete installation.

• Manufacturer Part Number: ACC-V1906SD
• Damper Type: Monotube 1-way adjustable (Rebound)
• Adjustability: Independent rebound and ride height adjustment
• Included Hardware: Camber-adjustable front top mounts, solid rear top mounts, and droplinks
• Build: High-performance springs and rebuildable damper units
• Application: Optimized for track precision and road comfort

Fits 2023-2025 Toyota GR Corolla models including Core, Circuit Edition, Premium, Premium Plus, and Morizo Edition.

The AST 5100 Series Clubracing suspension system is engineered for drivers who require a precise balance between track-day performance and daily driving composure. This monotube coilover kit features 1-way adjustment for rebound damping, allowing you to fine-tune the vehicle's handling characteristics and roll control with a single knob. The inverted monotube design utilizes a large internal piston to provide consistent damping force and heat dissipation during high-load cornering.

This kit replaces the factory struts and shocks with ride-height adjustable units, allowing for a lower center of gravity and optimized corner weighting. The package includes high-rate performance springs and CNC-machined top mounts—camber-adjustable at the front and solid at the rear—to eliminate the deflection found in OE rubber bushings and provide sharper steering response.

• Manufacturer Part Number: ACC-T2406SD
• Damping: 1-Way Rebound Adjustable
• Design: Monotube with large diameter piston
• Adjustment: Independent ride height and rebound damping
• Top Mounts: Camber-adjustable front and solid rear included
• Serviceability: Fully rebuildable dampers for long-term use
• Includes: Front and rear coilovers, springs, and adjustment tools

The Artec Industries Rear Coil Correction Kit (TJ2015) is engineered to solve the common issue of coil spring bowing and improper seating on lifted 1997-2006 Jeep Wrangler TJ models. When a TJ is lifted and the rear pinion angle is adjusted, the factory lower spring perches rotate, causing the springs to arc and lose efficiency. This kit allows you to relocate and level the lower perches to ensure the rear coils remain vertical and operate within their intended travel path.

Constructed from heavy-duty steel, these perches replace the thin factory mounts with a more robust, weld-on solution. By correcting the spring geometry, you improve ride quality, prevent spring-to-chassis interference, and ensure consistent spring rates across the axle.

• Fits 1997-2006 Jeep Wrangler TJ
• Corrects coil spring angle and bowing caused by suspension lifts
• Heavy-duty steel construction for off-road durability
• Weld-on installation replaces factory lower perches
• Manufacturer Part Number: TJ2015

Fits select 2007-2021 Toyota Tundra models including Base, SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The Old Man Emu BP-51 (Bypass 51mm) shock absorbers bring race-ready bypass technology to the Toyota Tundra. Designed for both daily driving and extreme off-road adventures, these position-sensitive bypass shocks feature a 51mm bore and remote reservoirs. Unlike traditional velocity-sensitive shocks, the BP-51 is position-sensitive, providing a plush ride during normal travel while delivering significant damping at the end-zones for exceptional chassis control and handling.

This kit is engineered to bolt directly to factory mounting points with no vehicle modifications required. The independent adjustment of rebound and compression allows for a precision-tuned ride that can accommodate additional vehicle weight from bumpers, winches, or heavy cargo.

• Materials: 6061 T6 aluminum body and reservoir for superior heat dissipation
• Finish: Type 3 40-micron hard anodized for corrosion and stone damage resistance
• Internal Bore: 51mm diameter position-sensitive bypass
• Adjustability: Independent rebound and compression adjustment for custom tuning
• Installation: Direct bolt-on application to factory mounts
• Manufacturer Part Number: OMETUN57BP51

Fits select 2010-2023 Toyota 4Runner models including SR5, Limited, TRD Off-Road, and TRD Pro.

The ARB Old Man Emu BP-51 Suspension Kit brings professional-grade race technology to your 5th Gen 4Runner. These bolt-on, big-bore internal bypass shock absorbers provide position-sensitive damping that adapts to your driving environment. By offering lower damping levels during the center of the stroke for a compliant street ride and increasing damping at the end zones, the BP-51 system ensures total chassis control during aggressive off-road maneuvers and prevents harsh bottoming out.

Constructed from 6061-T6 aircraft-grade aluminum with a 40-micron Type 3 hard-anodized finish, these shocks are engineered for superior heat dissipation and resistance to corrosion or stone damage. The system allows for independent adjustment of both rebound and compression, letting you tune the suspension based on vehicle load, terrain, and personal preference.

• Revolutionary internal bypass, position-sensitive technology
• Independent rebound and compression adjustment
• 6061-T6 aluminum body and reservoir for maximum heat management
• 40-micron hard-anodized finish (Type 3) for durability
• Designed for medium load applications with 3-inch lift height
• Bolt-on installation to factory mounting points
• Manufacturer Part Number: OME4RNR10MKBP51
• Backed by a 3-year manufacturer warranty

Fits 2010-2023 Toyota 4Runner models.

The ARB Old Man Emu BP-51 High-Performance Bypass Kit brings race-inspired suspension technology to the 5th Generation Toyota 4Runner. This "Heavy" kit is specifically engineered for vehicles carrying constant additional weight, utilizing internal bypass technology to provide position-sensitive damping. Unlike standard shock absorbers, the BP-51 series offers specific damping zones based on the piston's position in the stroke, ensuring a compliant ride during daily driving while delivering firm, controlled damping at the end-zones to prevent harsh topping or bottoming out during technical off-road maneuvers.

The system features independent, on-vehicle adjustability for both rebound and compression, allowing drivers to fine-tune their ride for specific loads or terrain. Construction consists of 6061 T6 aircraft-grade aluminum for the shock bodies and reservoirs, providing maximum heat dissipation and corrosion resistance.

• Internal Bypass Design: 51mm big-bore internal bypass technology for position-sensitive damping.
• Independent Adjustment: External, on-vehicle adjustment of both rebound and compression damping.
• Premium Materials: 6061 T6 aluminum body and reservoir with a Type 3, 40-micron hard-anodized finish.
• Durability: High-quality dash 6 braided hoses and oversized internal components for extreme longevity.
• Installation: Bolt-on kit replaces factory suspension components; no specialized fabrication required.
• Manufacturer Part Number: OME4RNR10HKBP51
• Warranty: Includes a 3-year manufacturer warranty.

Fits 2000-2021 Toyota Tundra models (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Nightshade, and Trail).

The ARB Old Man Emu BP-51 (Bypass 51mm diameter bore) brings race-proven internal bypass technology to your Tundra's front suspension. This high-performance coilover is designed for the front right (RH) position, offering position-sensitive damping that remains plush during normal travel while increasing firmness at the stroke limits to prevent harsh bottoming out. Engineered, tested, and manufactured in Australia, these coilovers utilize application-specific X5K grade steel coils for maximum durability and consistent ride height.

• Internal bypass technology for position-sensitive damping control
• Independent on-car adjustment for both compression and rebound
• 6061 T6 aircraft-grade aluminum body for superior heat dissipation
• High-quality X5K grade steel coils engineered for the Tundra platform
• Direct bolt-on replacement for the OE front right assembly
• Corrosion-resistant hard-anodized finish
• Manufacturer Part Number: BP5190010R
• Includes a 3-year manufacturer warranty

Fits select 2000-2021 Toyota Tundra and 2020-2021 Toyota Tacoma models.

The Old Man Emu BP-51 series brings race-inspired internal bypass technology to your Toyota suspension. This front left-hand (LH) coilover is engineered to provide superior damping control across both high-speed corrugated roads and technical off-road terrain. Unlike traditional shock absorbers, the BP-51 features a patent-pending internal bypass system that offers independent adjustability of both compression and rebound directly on the vehicle.

Built to withstand the rigors of overland travel, these coilovers utilize application-specific X5K grade steel coils. Every unit is designed, tested, and manufactured in-house by ARB in Australia to ensure precise tolerances and long-term durability. This system allows you to tune your ride quality to account for varying vehicle loads and terrain types without removing the shock from the vehicle.

• Position: Front Left Hand (LH)
• Series: BP-51 Internal Bypass
• Adjustability: Independent compression and rebound damping
• Spring Material: High-quality X5K grade steel
• Manufacturer Part Number: BP5190010L
• Warranty: 3-year manufacturer warranty
• Origin: Made in Australia

Fits 2005-2023 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, X-Runner, and Trail).

Bring race-proven bypass technology to your daily driver or overland build with the Old Man Emu BP-51 suspension system. This high-performance front right coilover features internal bypass technology, allowing for independent on-car adjustment of both compression and rebound damping. Unlike traditional shock absorbers, the BP-51 provides a plush ride during normal travel while increasing damping force at the ends of the stroke to prevent harsh bottoming out during aggressive off-road use.

Engineered and manufactured in Australia, this unit utilizes application-specific X5K grade steel coils for consistent ride height and load-carrying capacity. The aluminum body construction ensures superior heat dissipation and corrosion resistance in harsh environments.

• Manufacturer Part Number: BP5190006R
• Position: Front Right Hand (RH)
• Internal Bypass: Patent-pending technology for position-sensitive damping
• Material: High-quality X5K grade steel coils and aluminum body
• Adjustability: Independent compression and rebound tuning (on-car)
• Warranty: 3-year manufacturer warranty
• Origin: Made in Australia

Fits 2005-2023 Toyota Tacoma models including Base, Pre Runner, X-Runner, SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, and Trail.

The Old Man Emu BP-51 shock absorber brings race-proven bypass technology to your daily driver or overlanding rig. Unlike traditional shock absorbers where damping is strictly speed-dependent, the BP-51 (Bypass 51mm diameter bore) uses internal bypass ports to provide position-sensitive damping. This allows the suspension to remain plush during normal travel while significantly increasing damping force as it approaches the end of the stroke to prevent bottoming out. Each coilover is engineered with application-specific X5K grade steel coils and is fully adjustable while mounted on the vehicle.

• Position: Front Left Hand (LH)
• Damping Control: Independent on-car adjustment for both rebound and compression
• Construction: High-quality X5K grade steel coils and aircraft-grade 6061 T6 aluminum bodies
• Finish: Hard-anodized for superior heat dissipation and corrosion resistance
• Origin: Designed, tested, and manufactured in Australia by ARB
• MPN: BP5190006L
• Warranty: 3-Year manufacturer warranty

Fits select 2010-2023 Toyota 4Runner models equipped with KDSS (V6-4.0L).

Bring race-inspired bypass technology to your daily-driven or overlanding rig with the Old Man Emu BP-51 (Bypass 51mm) suspension system. This high-performance coilover features revolutionary internal bypass technology, allowing for independent on-vehicle adjustment of both compression and rebound damping. Unlike traditional velocity-sensitive shocks, the BP-51 provides a plush ride during normal travel while increasing damping force at the ends of the stroke to prevent bottoming out over harsh terrain.

Engineered and manufactured in-house by ARB in Australia, these coilovers utilize application-specific X5K grade steel coils. The shock body is constructed from 6061 T6 aircraft-grade aluminum for superior heat dissipation and corrosion resistance compared to traditional steel bodies.

• Internal bypass, position-sensitive damping for superior ride comfort and control
• On-vehicle adjustable rebound and compression damping for custom tuning
• High-quality X5K grade steel coil springs designed for specific vehicle weights
• 6061 T6 aluminum shock body for efficient cooling
• Designed for compatibility with Toyota 150-series KDSS systems
• 3-year manufacturer warranty
• Made in Australia
• Manufacturer Part Number: BP5190004L

Fits 1960-2021 Toyota Land Cruiser models including Base and Heritage Edition.

The Old Man Emu BP-51 (Bypass 51mm diameter bore) suspension system integrates professional race-grade technology into a bolt-on solution for off-road enthusiasts. These coilovers utilize internal bypass technology to provide position-sensitive damping. This design offers a compliant, comfortable ride during normal suspension travel while increasing damping force at the extremes of the stroke to prevent harsh bottoming or top-out events. Each unit features independent on-car adjustability for both rebound and compression, allowing you to fine-tune the damping characteristics to suit varying vehicle loads or terrain conditions.

• Manufacturer Part Number: BP5190003R
• Position: Front Right
• Spring Material: High-quality X5K grade steel coils
• Technology: Internal Bypass (BP-51) position-sensitive damping
• Adjustability: Independent compression and rebound damping controls
• Bore Size: 51mm
• Warranty: 3-year manufacturer warranty

Fits 1960-2021 Toyota Land Cruiser (Base and Heritage Edition).

The Old Man Emu BP-51 (Bypass 51mm) high-performance bypass shock absorber brings race-proven internal bypass technology to your Toyota Land Cruiser. Engineered to deliver superior comfort and control both on and off-road, these coilovers are independent of the shock’s position, providing sensitive damping at ride height and increased control at the end of the stroke. Each unit is equipped with X5K grade steel coils designed for vehicle-specific applications and features on-car adjustability for both compression and rebound to suit varying loads or terrain.

• Internal Bypass Technology: Provides position-sensitive damping for a smooth ride and bottom-out resistance.
• On-Vehicle Adjustable: Independent adjustment of compression and rebound damping without removing the shock.
• Premium Construction: 6061 T6 aluminum body for superior heat dissipation and corrosion resistance.
• X5K Steel Coils: High-grade spring steel for durability and consistent ride height.
• Application Specific: Valving and spring rates tuned specifically for Land Cruiser chassis dynamics.

• Manufacturer Part Number: BP5190003L
• Position: Front Left (LH)
• Spring Material: X5K Grade Steel
• Adjustability: Compression and Rebound
• Warranty: 3-Year Manufacturer Warranty

Fits 2010-2023 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser. This Old Man Emu BP-51 (Bypass 51mm) high-performance bypass shock absorber is designed to provide specific damping for your vehicle, delivering a race-inspired ride that handles both corrugated desert tracks and paved highways with ease.

The BP-51 series features revolutionary internal bypass technology, allowing for damping that is sensitive to both position and velocity. Unlike traditional shocks, this coilover provides a plush ride during normal travel and increases damping force as the suspension reaches the limits of its stroke. The on-car adjustable design allows you to fine-tune both compression and rebound damping to account for varying cargo loads and terrain requirements.

• Position: Front Right
• Adjustability: Independent on-vehicle compression and rebound adjustment
• Spring Material: High-quality X5K grade steel coils
• Technology: 51mm internal bypass for position-sensitive damping
• Construction: Engineered, tested, and manufactured in-house by ARB/Old Man Emu
• Warranty: 3-Year manufacturer warranty
• Part Number: BP5190002R

Fits select 2010-2023 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser.

Bring race-proven damping technology to your off-road adventures with the Old Man Emu BP-51 (Bypass 51mm) suspension system. This high-performance internal bypass coilover is engineered specifically to provide superior ride comfort on the highway while maintaining exceptional control over harsh terrain. Unlike traditional shocks, the BP-51 uses internal bypass ports to allow oil to divert around the piston at ride height for a plush feel, while increasing damping force at the ends of the stroke to prevent bottoming out.

Built by ARB to handle the rigors of overlanding, this unit features on-car adjustability, allowing you to fine-tune both rebound and compression to account for varying loads or terrain types. The assembly utilizes high-quality X5K grade steel coils, specifically designed for the weight and geometry of the Toyota 150-series platform.

• Position: Front Left (Driver Side)
• Series: BP-51 Internal Bypass
• Coil Material: Application-specific X5K grade steel
• Adjustability: Independent on-car compression and rebound adjustment
• Bore Size: 51mm
• Manufacturer Part Number: BP5190002L
• Warranty: 3-year manufacturer warranty

Fits 2005-2023 Toyota 4Runner models including SR5, Limited, TRD Off-Road, TRD Pro, and Trail editions.

The Old Man Emu BP-51 (Bypass 51mm) suspension system brings race-proven internal bypass technology to the Toyota 4Runner. These position-sensitive shocks feature a 51mm diameter bore and are designed to provide superior damping control across the entire stroke. By utilizing internal bypass passages, the BP-51 maintains a plush ride during normal travel while increasing damping force at the end-zones to prevent bottoming out during aggressive off-road maneuvers. Each shock is equipped with a remote reservoir to increase oil capacity and enhance heat dissipation during high-speed desert runs or technical trails.

This medium-duty 3-inch lift kit is engineered for vehicles with moderate accessory weight. The shock bodies and reservoirs are CNC-machined from 6061 T6 aluminum with a Type 3, 40-micron hard-anodized finish for maximum corrosion resistance and thermal efficiency. The system allows for independent adjustment of both rebound and compression, enabling drivers to fine-tune the suspension to their specific cargo load and terrain requirements.

• Bypass 51mm diameter bore for position-sensitive damping
• Independent compression and rebound adjustment
• High-grade 6061 T6 aluminum body and remote reservoir
• Type 3, 40-micron hard-anodized finish
• Includes application-specific Upper Control Arms (UCAs)
• 6061 grade aluminum top hats
• Bolt-on installation requires no vehicle modifications
• Manufacturer Part Number: 4RBP51MP

Fits 2005-2023 Toyota 4Runner models, including SR5, Limited, TRD Off-Road, and TRD Pro.

The ARB Old Man Emu BP-51 (Bypass 51mm) suspension kit brings race-inspired bypass technology to the Toyota 4Runner. Engineered specifically for vehicles carrying additional constant weight, this "Heavy Kit" includes upper control arms (UCAs) to maintain proper alignment geometry at the 3-inch lift height. Each shock features position-sensitive damping and a remote reservoir, allowing for independent adjustment of rebound and compression to suit specific cargo loads or terrain.

Constructed from 6061 T6 aluminum with a Type 3 40-micron hard-anodized finish, these shocks provide superior heat dissipation and corrosion resistance. The bolt-on design requires no vehicle modifications, providing a high-performance, custom-tuned solution for overlanding and off-road expeditions.

• Manufacturer Part Number: 4RBP51HP
• 51mm internal bypass bore for position-sensitive damping
• Independent rebound and compression adjustability
• 6061 T6 aluminum body, reservoir, and top hat
• Includes heavy-duty upper control arms for corrected geometry
• Designed for constant heavy loads and a 3-inch lift
• Type 3 40-micron hard-anodized finish for stone and corrosion resistance

Fits 2005-2014 Ford Mustang Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR.

The Air Lift Performance Coilover Kit (MPN 79015) is a high-performance suspension solution engineered to provide the S197 Mustang platform with an aggressive stance and precision handling. Built around high-quality monotube dampers for superior heat dissipation, this kit offers a significant drop of 1" to 4" below factory height. Each kit features vehicle-specific valving and internal pressure settings to deliver a refined balance between track-day performance and daily driving comfort.

• Precision Tuning: 32-way damping adjustment allows for fine-tuning of the ride quality to suit your specific driving environment.
• Adjustable Stance: Threaded body dampers and adjustable lower mounts provide a height range of 1" to 4" below stock without compromising travel.
• Robust Construction: Lightweight anodized aluminum is used for the damper bodies, top mounts, locking collars, and spring perches to ensure corrosion resistance and durability.
• Direct Fitment: Engineered with vehicle-specific upper and lower mounts for a straightforward, bolt-on installation using factory mounting points.
• Air Conversion Path: These coilovers are designed to be compatible with Air Lift Performance coilover-to-air conversion systems for those who may want to upgrade to a full air suspension setup in the future.

Fits 2013-2017 Honda Accord and 2015-2020 Acura TLX (all trims including SH-AWD and Hybrid).

The Air Lift Performance 79014 coilover kit is engineered for enthusiasts seeking a precise static drop without sacrificing daily drivability. Featuring high-quality monotube dampers for superior heat dissipation and consistent performance, these coilovers provide a significant upgrade over factory suspension. Each kit utilizes vehicle-specific valving and mounting points to ensure a direct, bolt-on installation and optimized ride quality tailored to the Honda/Acura chassis.

Constructed with lightweight, anodized aluminum damper bodies, top mounts, locking collars, and spring perches, this kit is built to resist corrosion while maintaining structural integrity. The 32-way damping adjustment allows you to fine-tune your ride from street-comfortable to track-firm. Additionally, this system offers a unique upgrade path, designed to be compatible with a coilover-to-air conversion kit (available April 2, 2025) for those who eventually want to transition to a full air suspension setup.

• 32-way damping adjustment for precise ride control
• Monotube dampers for improved performance and heat management
• Adjustable drop heights from 1" to 4" below factory height
• Lightweight anodized aluminum damper bodies and hardware
• Vehicle-specific upper and lower mounts for a true bolt-on fit
• Pillowball upper mounts or vehicle-specific rubber mounts (application dependent)
• Manufacturer Part Number: 79014

Fits 2019-2024 BMW Z4 and Toyota GR Supra (sDrive30i / M40i / Base / Premium / A91 Edition).

The Air Lift Performance 79012 Coilover Kit is a complete suspension solution designed for enthusiasts seeking a lower stance and improved handling without sacrificing daily drivability. Built with high-quality monotube dampers for superior heat dissipation, this kit offers 32-way damping adjustment to fine-tune the transition between street comfort and track-ready stiffness. The threaded body dampers and lower mounts provide a significant range of adjustment, allowing for a drop of 1" to 4" below factory ride height.

Constructed for longevity in harsh environments, the assembly features lightweight, corrosion-resistant anodized aluminum damper bodies, top mounts, locking collars, and spring perches. Each kit is engineered with vehicle-specific valving and mounts to ensure an accurate bolt-on installation. For those looking to upgrade later, these coilovers are designed to be easily converted to a full air suspension system via a dedicated conversion kit (available April 2, 2025).

• 32-way damping adjustment for precise ride control
• High-quality monotube dampers for consistent performance and heat management
• Adjustable drop heights from 1" to 4" below factory height
• Anodized aluminum damper bodies and hardware for corrosion resistance
• Adjustable camber plates with pillowball upper mounts (application specific)
• Vehicle-specific valving and internal pressure for optimized ride characteristics
• Direct bolt-on installation with vehicle-specific upper and lower mounts
• Manufacturer Part Number: 79012

Fits 2014-2024 Infiniti Q50 and 2017-2022 Infiniti Q60 (including Hybrid, Red Sport 400, Luxe, and Sport models).

Air Lift Performance coilovers provide a high-performance static suspension solution for the Infiniti Q50 and Q60 platforms. Designed for enthusiasts seeking a significant drop in ride height without sacrificing daily driving comfort, this kit utilizes vehicle-specific mounts and valving to ensure a precise, bolt-on installation. The system features monotube dampers for superior heat dissipation and consistent performance during spirited driving.

The threaded bodies and lower mounts allow for a customizable drop range of 1 to 4 inches below factory height. Fine-tune your handling and ride quality with 32 levels of damping adjustment, allowing you to transition between a compliant street setting and a firm track-ready setup. These coilovers are built for longevity with lightweight, corrosion-resistant anodized aluminum components.

• Manufacturer Part Number: 79011
• 32-way adjustable damping for precise ride tuning
• High-quality monotube dampers for improved thermal efficiency
• Anodized aluminum damper bodies, top mounts, and locking collars
• Threaded body dampers offer 1" to 4" of drop height adjustment
• Vehicle-specific valving and internal pressure for balanced performance
• Compatible with future coilover-to-air conversion kits (available April 2, 2025)
• Includes vehicle-specific upper and lower mounts

Fits select 2018-2024 Tesla Model 3 and Model Y (Base, Long Range, Performance, Standard Plus, and Standard Range).

Air Lift Performance Coilovers (MPN 79009) provide a high-performance static suspension solution for Tesla owners seeking an aggressive stance without sacrificing ride quality. Built with vehicle-specific valving and internal pressures, these coilovers are engineered to balance daily driving comfort with sharp handling characteristics. The monotube damper design ensures superior heat dissipation during spirited driving, while the 32-way damping adjustment allows for precise fine-tuning of the ride quality.

Constructed for longevity and weight savings, this kit features lightweight, corrosion-resistant anodized aluminum damper bodies, top mounts, locking collars, and spring perches. The threaded body dampers and lower mounts provide an adjustable drop height of 1 to 4 inches below factory settings, allowing for a perfectly dialed-in ride height. For owners who eventually want the versatility of air, this kit is designed to be compatible with a coilover-to-air conversion kit available starting April 2, 2025.

• 32-way adjustable damping for fine-tuned rebound and compression
• High-quality monotube dampers for consistent performance and heat management
• Adjustable drop height from 1 inch to 4 inches below factory height
• Corrosion-resistant anodized aluminum bodies, mounts, and locking collars
• Vehicle-specific valving and mounts for a direct, bolt-on installation
• Compatible with future coilover-to-air conversion systems

Fits 2018-2024 Honda Accord (including EX, EX-L, LX, Sport, Touring, and Hybrid models).

The Air Lift Performance series coilover kit (MPN: 79008) provides a complete suspension solution for 10th and 11th generation Honda Accord owners seeking a precise, static drop without sacrificing daily ride quality. Engineered with vehicle-specific valving and internal pressure, these coilovers replace the soft factory dampers with high-performance monotube units designed for superior heat dissipation and consistent damping during spirited driving.

Each kit features lightweight, anodized aluminum damper bodies, locking collars, and spring perches for maximum corrosion resistance and durability. The threaded bodies allow for a wide range of height adjustability, offering a drop of 1 to 4 inches below factory height. With 32-way damping adjustment, users can fine-tune the rebound and compression from soft comfort to track-ready firmness using the integrated adjustment knobs.

• 32-way damping adjustment for precise ride control
• Monotube dampers for improved performance and heat management
• Anodized aluminum construction for weight reduction and corrosion protection
• Threaded body dampers offer 1" to 4" of height adjustment
• Vehicle-specific upper and lower mounts for a direct bolt-on installation
• Adjustable camber plates with pillowball upper mounts (where applicable)
• Fully compatible with future coilover-to-air conversion kits

Fits 2015-2024 Ford Mustang (S550/S650) Fastback models, including EcoBoost, GT, V6, Shelby GT350/GT350R/GT500, Mach 1, Bullitt, and Dark Horse.

The Air Lift Performance Coilover Kit (MPN: 79007) provides a precision-engineered static suspension solution for S550 and S650 Mustang owners looking for a significant drop without sacrificing ride quality. Designed to replace factory struts and shocks with high-performance monotube dampers, this kit ensures superior heat dissipation and consistent performance under load. With 32-way damping adjustment, you can fine-tune your suspension from soft street comfort to aggressive track-ready stiffness.

Constructed from lightweight, corrosion-resistant anodized aluminum, these coilovers utilize threaded bodies and adjustable lower mounts to provide a drop range of 1" to 4" below factory height. This design allows you to adjust your stance while maintaining full suspension travel. Additionally, this kit is designed for future flexibility; it is compatible with Air Lift Performance coilover-to-air conversion kits (available April 2, 2025), allowing you to upgrade to a full air suspension system without replacing your primary dampers.

• 32-way damping adjustment for precise ride control
• High-performance monotube dampers for improved heat dissipation
• Adjustable drop height from 1" to 4" below factory ride height
• Lightweight anodized aluminum damper bodies, top mounts, and locking collars
• Adjustable camber plates with pillowball upper mounts or non-adjustable rubber mounts (application-specific)
• Vehicle-specific valving and internal pressure for optimized ride characteristics
• Direct bolt-on installation with vehicle-specific upper and lower mounts
• Manufacturer Part Number: 79007
• 1-year limited warranty

Fits 2013-2024 Subaru BRZ, Toyota 86/GR86, and 2013-2016 Scion FR-S.

Air Lift Performance Coilovers (MPN: 79006) are engineered for drivers seeking a precise static drop without sacrificing daily ride quality. Built around high-performance monotube dampers for superior heat dissipation, these coilovers feature 32-way damping adjustment, allowing you to fine-tune the suspension for everything from aggressive track sessions to comfortable street cruising. The threaded bodies and adjustable lower mounts provide a significant drop of 1 to 4 inches below factory height.

Constructed with anodized aluminum damper bodies, top mounts, and locking collars, this kit is designed for lightweight durability and corrosion resistance. A unique feature of this system is its future-proofing; these coilovers can be converted to a full air suspension system using an Air Lift conversion kit (available separately). Each kit includes vehicle-specific mounts and valving to ensure a direct bolt-on installation and optimized internal pressure for the BRZ/86 chassis.

• 32-way damping adjustable monotube dampers
• Adjustable drop height from 1" to 4" below OE
• Anodized aluminum damper bodies and spring perches
• Adjustable camber plates with pillowball upper mounts (where applicable)
• Threaded body dampers for independent height and preload adjustment
• Air-conversion ready for easy transition to air suspension
• Manufacturer Part Number: 79006
• 1-Year Limited Warranty

Fits select 2015-2024 Audi A3, S3, RS3, TT and Volkswagen Golf, GTI, Golf R, Arteon, and Tiguan models.

The Air Lift Performance 79003 Coilover Kit delivers a high-performance static lowering solution for MQB-platform vehicles. Engineered for enthusiasts who prioritize both stance and handling, these coilovers utilize monotube dampers to provide superior heat dissipation and consistent performance. With 32-way damping adjustment, you can fine-tune your ride from street-comfortable to track-ready. The threaded damper bodies allow for height adjustments ranging from 1" to 4" below the factory ride height, giving you total control over your vehicle's center of gravity and aesthetic.

• 32-way damping adjustment for precise rebound and compression tuning
• High-quality monotube dampers for improved performance and thermal stability
• Anodized aluminum damper bodies, top mounts, and locking collars for lightweight durability and corrosion resistance
• Threaded body dampers and lower mounts offer 1" to 4" of adjustable drop height
• Vehicle-specific valving and internal pressure for optimized ride characteristics
• Adjustable camber plates with pillowball upper mounts (application specific)
• Direct bolt-on installation using vehicle-specific mounting points
• Future-proof design allows for conversion to air suspension via available kits
• Manufacturer Part Number: 79003
• Includes 1-year limited warranty

Fits 2015-2021 Subaru WRX and WRX STI (Base, Limited, Premium, Launch Edition, S209, Series.HyperBlue, and Type RA).

The Air Lift Performance 79001 Coilover Kit is engineered for enthusiasts demanding a precise, aggressive stance without sacrificing ride quality. These coilovers utilize high-quality monotube dampers to provide superior heat dissipation and consistent damping performance under load. With 32 levels of damping adjustment, you can fine-tune the suspension to suit daily commuting or spirited driving. The threaded body dampers and lower mounts offer a significant drop range of 1 to 4 inches below factory ride height.

Constructed with lightweight, anodized aluminum damper bodies, top mounts, locking collars, and spring perches, this kit is built for long-term corrosion resistance and durability. This system also offers a unique upgrade path; the dampers can be easily converted to a complete air suspension system using a coilover-to-air conversion kit (available April 2, 2025).

• 32-way damping adjustment for custom ride control
• High-quality monotube dampers for improved performance and thermal stability
• 1 to 4 inch adjustable drop range below factory height
• Lightweight anodized aluminum components for corrosion resistance
• Vehicle-specific valving and mounts for a direct bolt-on installation
• Adjustable camber plates with pillowball upper mounts (where applicable)
• Manufacturer Part Number: 79001
• 1-year Limited Warranty

Fits 2014-2019 Chevrolet Corvette (Stingray, Z06, Grand Sport, and ZR1).

The aFe Control PFADT Series Featherlight Adjustable Coilover System provides a complete suspension solution for the C7 Corvette. By replacing the factory transverse leaf springs and OE shocks, this system converts the vehicle to a true independent suspension. This conversion eliminates the "crosstalk" and harsh ride characteristics common to the factory setup, resulting in more predictable handling and improved ride quality on both the street and track.

These coilovers are precision CNC-machined from 6061-T6 aluminum and finished with a durable hard-anodized coating. The mono-tube construction features an internal floating piston to separate oil and nitrogen gas, ensuring consistent performance under demanding conditions. With single-point damping adjustment for rebound and compression, and independent ride height adjustment, you can fine-tune your Corvette's stance and cornering dynamics with ease.

• Mono-tube construction with internal floating piston (IFP) for consistent damping
• Lightweight 6061-T6 hard-anodized aluminum bodies
• Single adjustable damping (rebound and compression) for fine-tuning
• BOA (Ball on Axis) upper mount system for quiet operation and precise movement
• Includes optimized spring rates for street and track applications
• Manufacturer Part Number: 430-401004-N

Fits 1997-2013 Chevrolet Corvette models including Base, Z06, ZR1, Grand Sport, and 427. This aFe Control PFADT Series Featherlight Adjustable Coilover System is designed as a complete suspension overhaul. By replacing the factory transverse leaf springs and OE shocks, this system provides a true independent suspension, eliminating the inherent "crosstalk" and harsh ride characteristics of the original equipment. The single-adjustable design allows for precise fine-tuning of both ride height and damping, making it ideal for Corvette owners seeking a balance between street comfort and track performance.

Each coilover is precision CNC-machined from 6061-T6 aluminum and features a hard-anodized finish for superior durability. The mono-tube construction utilizes an internal floating piston to separate the hydraulic oil from the nitrogen gas, ensuring consistent damping and predictable handling even under heavy use. The system includes a ball-on-axis upper mount system to maintain proper alignment throughout the suspension's stroke while providing quiet operation.

• Manufacturer Part Number: 430-401001-N
• Mono-tube construction with internal floating piston (IFP)
• Lightweight 6061-T6 aluminum bodies with hard-anodized finish
• Single-adjustable damping for rebound and compression tuning
• Fully adjustable ride height for custom stance
• Ball-on-axis upper mount system for quiet operation and precise control
• Optimized spring rates for dual-purpose street and track applications