Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
2455 products
2455 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The CORSA Performance 2017+ Camaro ZL1 Carbon Fiber air intake is made from pure 100% carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Camaro ZL1 Carbon Fiber Air Intake produces up to an additional 19HP and 28 FT LBS TQ from the supercharged 6.2L LT4 V8 engine without a tune. The ZL1 intake comes available in both DryTech and oiled filtration. The Corsa Performance ZL1 carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.
- Features Carbon Fiber Rain Guard To Protect Filter From Water Intrusion Via Hood Vents
- 100 Percent Carbon Fiber Construction Offers Unmatched Styling And Resists Heat Soak
- Black Powder Coated Aluminum Heat Shield Seals Flush To Hood Blocking Engine Heat
- Features Drytech 3D/No Oil/Synthetic Fiber/High Flow Performance Air Filter
- Features All Hardware And Instructions Necessary For Install
- Dyno Proven To Deliver Up To 19Hp And 28 Lbs Ft Of Torque
- Outflows The Stock Air Intake System By Up To 25 Percent
- Backed By A Limited Lifetime Warranty
- Installs In Under An Hour
- No Tune Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2023 | Chevrolet | Camaro | ZL1 |
The CORSA Performance Dodge Hellcat Carbon Fiber air intake is made from pure 100% carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Hellcat(R) Carbon Fiber Air Intake produces up to an additional 26HP and 23 FT LBS TQ from the supercharged 6.2L HEMI(R) engine without a tune. The Hellcat(R) intake comes available in both DryTech and oiled filtration. The Corsa Performance Dodge Hellcat carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.
- Features Premium Hardware Including; Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
- Features Carbon Fiber Rain Guard To Protect Filter From Water Intrusion Via Hood Vents
- 100 Percent Carbon Fiber Construction Offers Unmatched Styling And Resists Heat Soak
- Black Powder Coated Aluminum Heat Shield Seals Flush To Hood Blocking Engine Heat
- Features Drytech 3D/No Oil/Synthetic Fiber/High Flow Performance Air Filter
- Features All Hardware And Instructions Necessary For Install
- Dyno Proven To Deliver Up To 27Hp And 23 Lbs Ft Of Torque
- Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
- Backed By A Limited Lifetime Warranty
- Outflows Stock Intake By 10 Percent
- Features Premium Hardware Including
- Installs In Under An Hour
- No Tune Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Dodge | Challenger | SRT Demon |
| 2017-2022 | Dodge | Challenger | SRT Hellcat |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye |
| 2017-2020 | Dodge | Charger | SRT Hellcat |
| 2021-2022 | Dodge | Charger | SRT Hellcat Redeye Widebody |
The CORSA Performance C7 air intake is made from pure 100% carbon fiber construction and pairs aesthetics and design for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance C7 air intake, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results the CORSA Performance intake coaxes up to an additional 15HP and 15 FT LBS TQ from the LT-1 engine without a tune. The direct bolt-on system installs in minutes. The intake comes available with your choice of high-performance filtrations options; oiled or non-oiled DryTech filters. The C7 Corsa Performance carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.
Installation Instructions- Machined Black Anodized Aluminum MAF Mounting Bracket
- High Flow 5 Layer Oiled Cotton Gauze MaxFlow 5 Filter
- Limited Lifetime Warranty Air Intake 1 Year Filter
- 100 Percent Carbon Fiber Construction
- Up To 15 HP/15 TQ Increase
- Easy Bolt On Installation
- No Tune Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Chevrolet | Corvette | Grand Sport |
| 2014-2019 | Chevrolet | Corvette | Stingray |
Our air intakes use the Donaldson(R) PowerCore(R) Filter to improve performance and significantly decreased filter maintenance. The PowerCore(R) filter optimize engine performance by directing air through specifically designed channels that allow clean air to efficiently enter the engine. The Filter Box is engineered to minimize hot air from entering the engine in order to increase HP. Specifically designed to each vehicle application to increase air volume. Silicone connectors provide flexibility while still maintaining strength and thermal stability. Marine grade clamps allow optimal performance with a large operating range. Air ducts are specifically sculpted to maximize the breathing capabilities of you engine. Larger diameters; unique bends and smooth transitions give you maximum horsepower. All necessary hardware is included. NO need for oil or cleaning with the PowerCore(R) Filter which can last up to 150,000 miles or 4 years. PowerCore(R) is a registered trade name of Donaldson Company, Inc.
Installation Instructions- Larger Duct Dia./Unique Bends Smooth Transitions to Increase HP
- Silicone Conn. Provide Flexibility/Strength/Thermal Stability
- Closed Box Minimizes Hot Air From Entering The Engine
- Lasts up to 150000 Miles or 4 Years - No Oil Needed
- Maintenance Free Donaldson PowerCore? Filter
- Specifically designed to each vehicle
- Improved Engine Efficiency
- Limited Lifetime Warranty
- marine grade clamps
- Made in the U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Scion | FR-S | Base |
| 2013-2017 | Subaru | BRZ | Limited |
| 2013-2017 | Subaru | BRZ | Premium |
| 2015 | Subaru | BRZ | Series.Blue |
| 2016 | Subaru | BRZ | Series.HyperBlue |
| 2017 | Toyota | 86 | Base |
| 2017 | Toyota | 86 | Special Edition |
Get more cool air to feed your 2016 up Camaro 6.2L SS with this new Black Series Polymer constructed performance cold air intake.Nothing can wake up the power potential in your new Gen 6 Camaro 6.2L SS like one of our new CAD designed rotomolded cold air kits now available for LT1 equipped Camaros. These kits are designed and built in the USA using the latest CAD software and equipment to ensure the best design for improved horsepower and torque.Each kit features high quality polymer intake tubes and custom air shroud that bolts directly in place and allows the air to flow straight in from the factory inlet in the front OEM fascia. Each kit incorporates a high flow washable cotton element filter for maximum flow. All kits will work with all factory and aftermarket tunes.
Installation Instructions- Direct Fit Bolt On Replacement For Factory Intake - Installs In Approx. 45 mins with Basic Hand Tools - Unrestricted Airflow For Maximum Performance
- No Tune Required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2024 | Chevrolet | Camaro | LT1 |
| 2016-2024 | Chevrolet | Camaro | SS |
| 2017-2023 | Chevrolet | Camaro | ZL1 |
This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions.
Installation InstructionsInstallation Instructions
- Black Powder Coat Finish - Direct Fit Replacement - Improved Air Flow For Maximum Performance
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2014 | Chrysler | 300 | SRT8 |
| 2013 | Chrysler | 300 | SRT8 Core |
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2015 | Dodge | Challenger | Scat Pack |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2011-2014 | Dodge | Challenger | SRT8 |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2022-2023 | Dodge | Charger | Scat Pack Widebody |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2012-2014 | Dodge | Charger | SRT8 |
| 2018-2019 | Dodge | Durango | SRT |
This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions.
Installation InstructionsWarranty
Installation Instructions
- Powder Coated Chrome Finish - Direct Fit Replacement - Improved Air Flow For Maximum Performance
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2015 | Chevrolet | Camaro | SS |
| 2012-2015 | Chevrolet | Camaro | ZL1 |
This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions. This BBK Cold air intake is 50 State Legal - C.A.R.B Approved
Installation InstructionsInstallation Instructions
Installation Instructions
- Powder Coated Chrome Finish - 50 State Legal CARB Approved - Direct Fit Replacement - Improves Air Flow For Improved Performance
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2010 | Ford | Mustang | Base |
"This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions. This BBK Cold Air Intake is 50 State Legal - CARB Approved for 2005 and 2006 Models ONLY.
Installation InstructionsWarranty
Installation Instructions
Installation Instructions
- Chrome Powder Coat Finish - Direct Fit Replacement For Factory Intake - Improved Air Flow For Improved Performance - Washable - Re useable Filter
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2009 | Ford | Mustang | Bullitt |
| 2005-2009 | Ford | Mustang | GT |
| 2007-2008 | Ford | Mustang | Shelby GT |
This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions.
Installation InstructionsInstallation Instructions
- Black Powder Coat Finish - Fender Well Air Filter Mount - Improved Performance
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1986-1993 | Ford | Mustang | GT |
| 1986-1993 | Ford | Mustang | LX |
| 1993 | Ford | Mustang | SVT Cobra |
| 1993 | Ford | Mustang | SVT Cobra R |
This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions. This BBK Cold air intake is 50 State Legal - C.A.R.B Approved
Installation InstructionsWarranty
Installation Instructions
- 50 State CARB Legal - Fender well style air filter mount for cooler air intake - Powder Coated Chrome Finish - Washable Filter
- Made In The USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1986-1993 | Ford | Mustang | GT |
| 1986-1993 | Ford | Mustang | LX |
| 1993 | Ford | Mustang | SVT Cobra |
| 1993 | Ford | Mustang | SVT Cobra R |
S-FLO 4” Coupler: The S-FLO 4” Coupler transitions from 4.5” to 4” to accommodate aftermarket turbo inlet pipes that are 4” in diameter.
Installation Instructions- Engineered to be used with the AWE 4.5" S-FLO Carbon Intake components and 4" aftermarket turbo inlet pipes.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020,2022-2026 | Audi | RS3 | Base |
| 2018-2022 | Audi | TT RS Quattro | Base |
The S-FLO Carbon Intake for the S650 Mustang GT & Dark Horse pairs genuine 2x2 carbon fiber construction with precision-engineered airflow to deliver real gains, sharper response, and a harder-edged induction note without sacrificing factory-like fitment or drivability.
Installation Instructions- Massive filter upgrade: Dual air filters, massive 5.00” outlets, each with a 41% increase in surface area per filter over stock
- All throttle. Presenting the AWE S-FLO Carbon Intake for the S650 Mustang GT & Dark Horse:
- AWE carbon tube has an oversized 4.25” outlet to allow for throttle body upgrades
- Perfect integration with OEM inlet ducting, retains stock mounting locations
- Genuine 2x2 carbon construction, UV-stabilized resin and matte clear coat
- Intake box protects from heat while maximizing aggressive intake sound
- Max gains of +15 hp and +15 lb-ft of torque at the wheels
- Designed, engineered, and tested in-house at AWE
- S-FLO Filter is washable and oil-less
- AWE No Check Engine Light Guarantee
- Utilizes stock mounting locations
- Carbon boxes seal to the hood
- Perfect fitment, guaranteed
- No tune required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Ford | Mustang | Dark Horse |
| 2024-2025 | Ford | Mustang | Dark Horse Premium |
| 2024-2026 | Ford | Mustang | GT |
| 2024-2026 | Ford | Mustang | GT Premium |
Meet the intake engineered to match the G8X’s pedigree. The S-FLO Carbon Intake combines genuine 2x2 carbon fiber construction with precision-machined aluminum components to deliver power, response, and unmistakable sound—all with factory-like fitment and zero compromise. At its core is AWE’s oil-less, washable S-FLO Filter, designed with an inverted cone to maximize flow while providing a 142% increase in filter surface area compared to stock. A massive 4.5” outlet ensures seamless breathing into the turbo, while a machined aluminum adapters ensures a perfect seal from intake to compressor. The system integrates directly with the OEM inlet ducting and retains all stock mounting points for an OE-grade install. Louvers built into the airbox are angled to direct turbo spool toward the cabin—intoxicating when under throttle, quiet when cruising. Finished in UV-stabilized resin and clear coat to maintain its finish over time, the S-FLO Carbon Intake delivers gains of +14 hp and +9 lb-ft of torque, with no tune required. It installs easily, fits like factory, and unlocks performance the way only AWE can.
- Custom-designed coupler and spring-clamp assembly assures a simple and snap-in fitment
- Machined aluminum mounting points for long-term durability and easy installation
- Massive filter upgrade: two 7" long x 6.75" wide cone filters with 4.5" outlets
- Intake box protects from heat while maximizing aggressive intake sound
- Genuine 2x2 carbon construction, UV-stabilized resin and clear coat
- Increased air filter surface area of 142% over stock per filter
- Max gains of +14 horsepower +9 lb-ft of torque at the wheels
- Removable machined couplers allow for big-power upgrades
- Engineered to fit under the Competition Sport (CS) brace
- Designed, engineered, and tested in-house at AWE
- Louvers to direct sound toward the cabin
- S-FLO Filter is washable and oil-less
- AWE No Check Engine Light Guarantee
- Perfect fitment, guaranteed
- No tune required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | BMW | M2 | Base |
| 2021-2025 | BMW | M3 | Base |
| 2021-2025 | BMW | M3 | Competition |
| 2022-2025 | BMW | M3 | Competition xDrive |
| 2024 | BMW | M3 | CS |
| 2021-2026 | BMW | M4 | Base |
| 2021-2026 | BMW | M4 | Competition |
| 2022-2026 | BMW | M4 | Competition xDrive |
| 2025 | BMW | M4 | CS |
| 2023 | BMW | M4 | CSL |
4.5” of pure carbon power. Presenting the S-FLO Carbon Intake Suite for the Audi 8V RS3 and Mk3 TT RS:S-FLO Closed Carbon Intake System: The S-FLO Closed Carbon Intake System combines each component of the S-FLO suite and adds a bespoke carbon air box. Spanning the entire width of the grille, the S-FLO Closed Carbon Intake is capable of collecting all of the ram air from the front of the vehicle to feed it into the S-FLO Filter.Thanks to the 2x2 carbon fiber construction, heat soak is subdued during hard driving while the increase in air box volume ensures the 2.5T never runs scarce of cold air. The S-FLO Closed Carbon Intake System unlocks 17 hp and 6 lb-ft of torque at the wheels, and is capable of handling any higher-than-stock boost level thrown at it. S-FLO 4” Coupler: The S-FLO Carbon Inlet Tube, Shortie Carbon Intake, and Open/Closed S-FLO Carbon Intake Systems come complete with a 4.5” to 3” couplers to mate to the factory 3” turbo inlet pipe. The S-FLO 4” Coupler transitions from 4.5” to 4” to accommodate aftermarket turbo inlet pipes that are 4” in diameter and is available separately (SKU: 7260-11002). DV Adapter Kit: The DV Adapter Kit is a an adapter machined in-house out of billet 6061 aluminum for 2019+ models. The kit includes the DV adapter, two oil resistant o-rings, two worm-drive clamps, and 8.75" of high temp silicone hose. Important Notes: 2019+ models require the additional DV Adapter KitThe AWE 4.5" S-FLO Carbon Intake Suite is for racing use only
Installation Instructions- S-FLO Closed Carbon Intake System optimized to capture significant amount of ram air over stock, and allows entire air filter to be utilized
- Max gains of 17 hp and 7 lb-ft of torque at the wheels (S-FLO Closed Carbon Intake System, stage 1+ software)
- Max gains of 7 hp and 3 lb-ft of torque at the wheels (S-FLO Open Carbon Intake System, stage 1+ software)
- The largest constant diameter intake system available for the Audi 8V RS3 and Mk3 TT RS on the planet
- Completely modular design allows multiple configuration options and an upgrade path
- Colossal 4.5" carbon intake tube removes primary restriction from 2.5T intake path
- Features the washable and oil-less high-flow S-FLO Filter
- Bespoke CNC laser-cut stainless support bracket included
- DV Adapter Kit for 2019+ models available separately
- Intoxicating turbo spool and diverter valve sounds
- Designed, engineered, and tested in-house at AWE
- 30% increase in filter surface area over stock
- Retains stock mounting locations for OE fit
- Perfect integration with OEM inlet ducting
- Genuine 2x2 carbon fiber construction
- AWE No Check Engine Light Guarantee
- UV-stabilized resin and clear coat
- Increase in overall airbox volume
- Perfect fitment, guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020,2022-2026 | Audi | RS3 | Base |
| 2018-2022 | Audi | TT RS Quattro | Base |
4.5” of pure carbon power. Presenting the S-FLO Carbon Intake Suite for the Audi 8V RS3 and Mk3 TT RS:S-FLO Open Carbon Intake System: Combine the S-FLO Carbon Inlet Tube with the Shortie Carbon Intake, and you have the impressive (and very vocal) S-FLO Open Carbon Intake System. A full 4.5” diameter configuration from S-FLO Filter to turbo inlet coupler, this version delivers an increase of 7 hp and 3 lb-ft of torque at the wheels with an ample dose of turbo induction and diverter valve sounds with each rip of boost. DV Adapter Kit: The DV Adapter Kit is a an adapter machined in-house out of billet 6061 aluminum for 2019+ models. The kit includes the DV adapter, two oil resistant o-rings, two worm-drive clamps, and 8.75" of high temp silicone hose. Important Notes: 2019+ models require the additional DV Adapter KitThe AWE 4.5" S-FLO Carbon Intake Suite is for racing use only
Installation Instructions- Max gains of 17 hp and 7 lb-ft of torque at the wheels (S-FLO Closed Carbon Intake System, stage 1+ software)
- Max gains of 7 hp and 3 lb-ft of torque at the wheels (S-FLO Open Carbon Intake System, stage 1+ software)
- The largest constant diameter intake system available for the Audi 8V RS3 and Mk3 TT RS on the planet
- Completely modular design allows multiple configuration options and an upgrade path
- Colossal 4.5" carbon intake tube removes primary restriction from 2.5T intake path
- Features the washable and oil-less high-flow S-FLO Filter
- Bespoke CNC laser-cut stainless support bracket included
- DV Adapter Kit for 2019+ models available separately
- Intoxicating turbo spool and diverter valve sounds
- Designed, engineered, and tested in-house at AWE
- 30% increase in filter surface area over stock
- Retains stock mounting locations for OE fit
- Genuine 2x2 carbon fiber construction
- AWE No Check Engine Light Guarantee
- UV-stabilized resin and clear coat
- Perfect fitment, guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020,2022-2026 | Audi | RS3 | Base |
| 2018-2022 | Audi | TT RS Quattro | Base |
| 2022 | Audi | TT RS Quattro | Heritage Edition |
Break the mold with AirGate™. The AirGate™ Carbon Intake allows options for those seeking more volume from their intake when under boost. Want to hear more turbo inductions sounds from within the cabin? Go lidless. Prefer to keep it a bit more stealthy? Simply bolt the AirGate™ lid in place with a few turns of two easily accessible hex screws. Constructed of genuine 2x2 carbon fiber with a UV-stabilized resin and clear coat, the AirGate™ Carbon Intake mounts securely to the stock location and integrates with the factory ducting perfectly via the AirGate’s floating airbox inlet. The S-FLO Filter: The included AWE S-FLO Filter is designed specifically for this airbox to be easily serviceable and to maximize airflow. This increase in airflow unlocked maximum gains of 17 hp and 13 lb-ft of torque at the wheels for the 3.0T, and 16 hp and 3f t-lbs of torque at the wheels for the 2.9TT when paired with a piggyback tuner. The combination of carbon fiber airbox and included S-FLO Filter makes for a more aggressive intake note, with an intoxicating turbo spool sound.
Installation Instructions- Max gains of 17 hp and 13 lb-ft of torque at the wheels for B9 S4 / S5 3.0T (with piggyback tuner)
- Presenting the AWE AirGate™ Carbon Intake for the Audi B9 S4, S5, RS 4 and RS5:
- Intoxicating turbo spool when under boost with lid off, stealthy with lid on
- Features the durable and washable high-flow AWE S-FLO Filter
- Smooth transition from airbox inlet to turbo inlet
- Designed, engineered, and tested in-house at AWE
- Perfect integration with OEM inlet ducting
- Genuine 2x2 carbon fiber construction
- AWE No Check Engine Light Guarantee
- UV-stabilized resin and clear coat
- Retains stock mounting locations
- Perfect fitment - guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2019,2021-2024 | Audi | RS5 | Base |
| 2019,2021-2025 | Audi | RS5 Sportback | Base |
| 2019-2025 | Audi | S4 | Premium |
| 2018-2025 | Audi | S4 | Premium Plus |
| 2018-2025 | Audi | S4 | Prestige |
| 2019-2024 | Audi | S5 | Premium |
| 2018-2024 | Audi | S5 | Premium Plus |
| 2018-2024 | Audi | S5 | Prestige |
| 2020-2025 | Audi | S5 Sportback | Premium |
| 2018-2025 | Audi | S5 Sportback | Premium Plus |
| 2018-2025 | Audi | S5 Sportback | Prestige |
Performance has never looked this good. Full floating carbon construction, no silicone. The AWE S6 / S7 S-FLO Carbon Intake features full carbon fiber construction allowing smooth transitions of airflow from the grille inlet to the turbo inlets. By deploying a new grille-mounted air box inlet, and utilizing the factory accordion turbo couplers, the S-FLO Carbon Intake floats in place under heavy torque situations, preventing strain on the carbon fiber. Power testing: The S6 / S7 S-FLO Carbon Intake has been power and quality tested on the stock setup as well as under aggressive stage two conditions which incorporated high-flow downpipes. The S6 / S7 S-FLO Carbon Intake produced healthy gains in all scenarios, and has withstood long-term real-world testing for quality and performance.Add in AWE's enlarged, integrated honeycomb-meshed port located on the top of the S-FLO’s air box, and You've got optimal airflow even when pushing higher-than-stock boost levels. In other words, this box has both the looks and performance to earn the AWE S-FLO badge. The S-FLO Filter: The included AWE S-FLO Filter is designed specifically for the S6 / S7 S-FLO Carbon Intake to ensure easy service and to maximize airflow by sitting in the direct path of ram air from the grille. This increased airflow unlocked maximum gains of 24 hp @ 3250 rpm and 36 lb-ft of torque @ 3150 rpm, at the crank, with Stage 2 software and high-flow downpipes. The combination of S-FLO carbon fiber airbox and included S-FLO Filter makes for a more aggressive intake note, with a distinctive turbo spool sound when under boost.
Installation Instructions- Max gains of 24 hp @ 3250 rpm and 36 lb-ft of torque @ 3150 rpm, crank (Stage 2 software + downpipes)
- Max gains of 15 hp and 19 lb-ft of torque @ 4020 rpm, crank (Stage 1 software)
- Smooth transitions from full carbon fiber airbox inlet and turbo inlets
- Proven power on Stage 1 and Stage 2 cars, with and without downpipes
- Completely redesigned to support higher power applications
- Durable and washable high-flow AWE S-FLO Filter included
- Perfect integration with OEM inlet ducting
- UV-stabilized resin and clear coat
- Retains stock mounting locations
- No Check Engine Light Guarantee
- Perfect fitment - guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2018 | Audi | RS7 | Base |
| 2013-2015 | Audi | S6 | Base |
| 2016-2018 | Audi | S6 | Premium Plus |
| 2016-2018 | Audi | S6 | Prestige |
| 2013-2016 | Audi | S7 | Base |
| 2017-2018 | Audi | S7 | Premium Plus |
| 2017-2018 | Audi | S7 | Prestige |
4.5" of carbon induction. Presenting the AWE S-FLO Carbon Intake Suite for the Toyota GR Supra. The S-FLO Carbon Intake is a full, modular replacement for the factory airbox. Featuring a 4.5” diameter inlet tube, and a massive oil-less inverted cone filter that provides 71% increase in filter surface area over stock... you're looking at an ample dose of upgraded induction worthy of dyno-proven 15 hp and 21 lb-ft of torque at the wheels (stage 1 software). A bespoke CNC laser-cut aluminum support bracket secures the S-FLO Carbon Intake, complete with machined aluminum mounting barbs. The genuine 2x2 twill carbon construction integrates a machined aluminum sensor fitting for OE-like fitment and CEL-free performance. For the full carbon experience, AWE S-FLO Carbon Lid are available seperately.
Installation Instructions- Max gains of 15 hp and 21 lb-ft of torque at the wheels (stage 1 software)
- Confirmed to fit on GR Supras with a Cusco front brace installed
- S-FLO Filter with inverted cone design for increased flow
- Bespoke CNC laser-cut aluminum support bracket included
- Machined aluminum sensor fitting and mounting points
- Designed, engineered, and tested in-house at AWE
- 71% increase in filter surface area over stock
- Retains stock mounting locations for an OE fit
- Full S-FLO Carbon Lid available separately
- S-FLO filter is washable and oil-less
- AWE No Check Engine Light Guarantee
- UV-stabilized resin and clear coat
- Applicable to all 3.0L GR Supras
- Genuine 2x2 carbon construction
- 4.5”diameter filter outlet
- Perfect fitment, guaranteed
- Intoxicating turbo spool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Toyota | GR Supra | 45th Anniversary Edition |
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2023 | Toyota | GR Supra | A91-MT Edition |
| 2020-2026 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2026 | Toyota | GR Supra | MkV Final Edition |
| 2020-2026 | Toyota | GR Supra | Premium |
Performance has never looked this good. The RS6 / RS 7 S-FLO Carbon Intake: Full floating carbon construction, no silicone. The AWE RS6 / RS 7 S-FLO Carbon Intake features full carbon fiber construction allowing smooth transitions of airflow from the grille inlet to the turbo inlets. By deploying a new grille-mounted air box inlet, and utilizing the factory accordion turbo couplers, the S-FLO Carbon Intake floats in place under heavy torque situations, preventing strain on the carbon fiber. Power testing:The RS6 / RS 7 S-FLO Carbon Intake has been power and quality tested on the stock setup as well as under aggressive stage two conditions which incorporated high-flow downpipes. The RS6 / RS 7 S-FLO Carbon Intake produced healthy gains in all scenarios, and has withstood long-term real-world testing for quality and performance. Add in AWE's new enlarged, integrated honeycomb-meshed port located on the top of the S-FLO’s air box, and You've got optimal airflow even when pushing higher-than-stock boost levels. In other words, this box has both the looks and performance to earn the AWE S-FLO badge. The S-FLO Filter: The included AWE S-FLO Filter is designed specifically for the RS6 / RS 7 S-FLO Carbon Intake to ensure easy service and to maximize airflow by sitting in the direct path of ram air from the grille. This increased airflow unlocked maximum gains of 32 hp and 50 lb-ft of torque @ 3150 rpm, at the crank, with Stage 2 software and high-flow downpipes. The combination of S-FLO carbon fiber airbox and included S-FLO Filter makes for a more aggressive intake note, with a distinctive turbo spool sound when under boost.
Installation Instructions- California Air ResAWE'sces Board Executive Order #D-832 does not apply to the 2013-2016 Audi RS6 models. The 2013-2016 RS6 models were only available in the European Market.
- Max gains of 32 hp and 50 lb-ft of torque @ 3150 rpm, crank (Stage 2 software + downpipes)
- Presenting the next generation of the AWE S-FLO Carbon Intake for the Audi RS6 / RS 7:
- Max gains of 15 hp and 27 lb-ft of torque @ 2670 rpm, crank (stock software)
- Smooth transitions from full carbon fiber airbox inlet and turbo inlets
- Proven power on Stage 1 and Stage 2 cars, with and without downpipes
- Completely redesigned to support higher power applications
- Durable and washable high-flow AWE S-FLO Filter included
- California Air ResAWE'sces Board Executive Order #D-832
- Perfect integration with OEM inlet ducting
- UV-stabilized resin and clear coat
- Retains stock mounting locations
- No Check Engine Light Guarantee
- Perfect fitment - guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2018 | Audi | RS7 | Base |
| 2016-2018 | Audi | RS7 | Performance |
For drivers looking for an intake that not only performs, but also looks good doing it, the AWE S-FLO Carbon Intake is the one. The S-FLO Carbon Intake is comprised of three primary components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube and (3) the 2x2 twill carbon fiber cover.By deploying the fully enclosed S-FLO Carbon Intake, the ambient ram-air is drawn into the inlet and fed beneath the S-FLO’s carbon cover, keeping it cool compared to an open element configuration susceptible to engine bay temperatures. Keeping this ambient ram-air cool results in impressive power gains filtered through the AWE S-FLO Intake. The AWE S-FLO Carbon Intake includes the S-FLO Carbon Cover, S-FLO Intake, S-FLO Filter, and all necessary brackets and mounting hardware.
Installation Instructions- Perfect integration with OEM air inlet -- mounts in factory location for a sleek OEM look
- 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube
- 2x2 twill carbon fiber cover with UV-stabilized resin clear coat
- Max gains of 11 hp and 9 ft-lbs of torque at the crank
- Designed, engineered, and tested in-house at AWE
- S-FLO allows 34% more airflow over stock
- Dry media, washable S-FLO Filter
- Perfect fitment, guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2012 | Audi | S5 | Base |
| 2010-2012 | Audi | S5 | Cabriolet |
For drivers looking for an intake that not only performs, but also looks good doing it, the AWE S-FLO Carbon Intake is the one. The S-FLO Carbon Intake is comprised of three primary components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube and (3) the 2x2 twill carbon fiber cover.By deploying the fully enclosed S-FLO Carbon Intake, the ambient ram-air is drawn into the inlet and fed beneath the S-FLO’s carbon cover, keeping it cool compared to an open element configuration susceptible to engine bay temperatures. Keeping this ambient ram-air cool results in impressive power gains filtered through the AWE S-FLO Intake.The AWE S-FLO Carbon Intake includes the S-FLO Carbon Cover, S-FLO Intake, S-FLO Filter, and all necessary brackets and mounting hardware.
- Perfect integration with OEM air inlet -- mounts in factory location for a sleek OEM look
- 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube
- 2x2 twill carbon fiber cover with UV-stabilized resin clear coat
- Max gains of 11 hp and 9 ft-lbs of torque at the crank
- Designed, engineered, and tested in-house at AWE
- S-FLO allows 34% more airflow over stock
- Dry media, washable S-FLO Filter
- Perfect fitment, guaranteed
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2012 | Audi | S5 | Base |
| 2010-2012 | Audi | S5 | Cabriolet |
The S-FLO IntakeThe AWE S-FLO Intake packs the same power as the full carbon intake, minus the carbon. The AWE S-FLO Intake is comprised of two key components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube. Together, it’s a free-flowing match made in heaven, allowing optimal flow geometry through the inlet, center section, and outlet of the tube, keeping things tight with our custom molded lip for a perfect seal to the airbox.
Installation Instructions- 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube
- Max gains of 15 hp and 11 lb-ft of torque at the crank
- Designed, engineered, and tested in-house at AWE
- S-FLO allows 34% more airflow over stock
- Dry media, washable S-FLO Filter
- Perfect fitment, guaranteed
- AWE No CEL Guarantee
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013 | Audi | S4 | Base |
| 2014-2016 | Audi | S4 | Premium Plus |
| 2014-2016 | Audi | S4 | Prestige |
| 2013,2017 | Audi | S5 | Base |
| 2014-2016 | Audi | S5 | Premium Plus |
| 2014-2016 | Audi | S5 | Prestige |
$599.95
$999.95
The AMS Performance MKV Supra Carbon Fiber Intake Kit is engineered to deliver a 25% reduction in pressure drop which leads to better efficiency and more power. Our Engineers designed the fully enclosed dry air filter to draw in a larger volume of air into its hand laid carbon fiber constructed cold air box.
Installation InstructionsThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Toyota | GR Supra | A91 Edition |
| 2020-2021 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2021 | Toyota | GR Supra | Premium |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2013 | Mini | Cooper | Coupe John Cooper Works |
| 2012-2013 | Mini | Cooper | Coupe S |
| 2009-2013 | Mini | Cooper | John Cooper Works |
| 2009-2013 | Mini | Cooper | John Cooper Works Clubman |
| 2013 | Mini | Cooper | John Cooper Works GP |
| 2012-2013 | Mini | Cooper | Roadster John Cooper Works |
| 2012-2013 | Mini | Cooper | Roadster S |
| 2007-2013 | Mini | Cooper | S |
| 2008-2013 | Mini | Cooper | S Clubman |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Mini | Cooper | S |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Mini | Cooper | S |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Mini | Cooper | S |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Mini | Cooper | S |
Showing 1530/2455
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.