Fits 2015+ Subaru WRX and STI (VA).

The Remark Mid Pipe (RO-CPVA-N) is a precision-engineered exhaust component designed to replace the restrictive factory mid-section on the VA chassis WRX and STI. By optimizing the exhaust flow path, this mid pipe enhances the boxer engine's acoustic profile and reduces backpressure compared to the original equipment.

• Direct bolt-on fitment to factory mounting points
• Engineered to improve exhaust scavenging and flow efficiency
• Replaces restrictive factory mid-pipe section
• Manufacturer Part Number: RO-CPVA-N

Fits 2015-2021 Subaru WRX and WRX STI (VA).

The Remark Resonated Mid Pipe is designed to optimize the exhaust flow and acoustic profile of the VA chassis Subaru WRX and STI. By replacing the factory mid-section, this resonated unit (RO-CPVA-C) helps to eliminate unwanted rasp and cabin drone, resulting in a deeper, more refined exhaust note. It is an essential component for enthusiasts looking to complete their exhaust system upgrade while maintaining a mature sound level.

• Direct bolt-on replacement for the factory mid pipe
• Integrated resonator specifically tuned for the 2.0L and 2.5L boxer engines
• Improved exhaust flow characteristics compared to OE piping
• Manufacturer Part Number: RO-CPVA-C

Fits 2017-2024 Infiniti Q50 (2WD models).

The Remark Resonated Mid-Pipe is engineered to refine the acoustic profile of your Infiniti Q50 by smoothing out harsh exhaust frequencies. This mid-section replaces the restrictive factory piping with a higher-flow design, featuring an integrated resonator to minimize cabin drone and rasp. It provides a deeper, more aggressive tone under load while maintaining a comfortable volume during steady cruising, making it an essential upgrade for enthusiasts seeking a balanced exhaust setup.

• Resonated design to cancel out unwanted frequencies and drone
• Improves exhaust scavenging and overall flow over the stock mid-pipe
• Direct bolt-on installation to factory mounting points
• Specifically tuned for Rear-Wheel Drive (2WD) Q50 configurations
• Manufacturer Part Number: RO-CPQ5-C

Fits 2023-2024 Nissan Z. The REMARK Resonated Midpipe Kit (RO-CP35-C) is engineered to refine the exhaust note of the VR30DDTT platform while maximizing flow. Designed as a direct replacement for the restrictive factory mid-section, this kit features integrated resonators specifically tuned to eliminate unwanted rasp and cabin drone, providing a deeper and more sophisticated tone compared to non-resonated alternatives.

• Direct bolt-on installation to factory mounting locations
• Integrated resonators for drone reduction and sound tuning
• Optimized exhaust flow for improved engine response
• Precision fitment for the RZ34 chassis
• Manufacturer Part Number: RO-CP35-C

This midpipe kit is an ideal solution for enthusiasts who want to bridge the gap between their downpipes and axle-back system without compromising daily drivability or sound quality. By smoothing out exhaust pulses, the REMARK midpipe ensures your Nissan Z sounds as aggressive as it performs.

Fits Nissan 370Z (Z34) models.

The Remark V2 Mid Pipe Kit (RK-M2063N-01) is engineered to optimize exhaust flow and enhance the acoustic profile of the Nissan 370Z. By replacing the restrictive factory mid-section with a high-flow design, this kit reduces backpressure and provides a more resonant, performance-oriented exhaust note. It is designed as a direct bolt-on component, utilizing factory mounting points to ensure a precise fit and straightforward installation.

• Specifically engineered for the Nissan 370Z (Z34) chassis
• Designed to improve exhaust scavenging and flow characteristics
• Direct bolt-on installation requires no custom fabrication
• Manufacturer Part Number: RK-M2063N-01

Fits select 2007-2011 Jeep Wrangler and Wrangler Unlimited (JK/JKU) models equipped with the 3.8L engine.

Maintain your vehicle's exhaust system integrity with this Omix intermediate exhaust pipe. Designed as a direct-fit OE-style replacement, this pipe is engineered to meet or exceed factory quality standards, ensuring reliable performance and a precise fit without the need for custom fabrication. It replaces worn or rusted factory pipes to restore quiet operation and proper exhaust flow.

Constructed from durable steel, this 77-inch intermediate pipe features a 2.5-inch ID inlet and a 2.5-inch OD outlet for seamless integration with your existing exhaust components. It utilizes factory mounting points for a straightforward installation.

• Direct replacement for OE part number 52059938AF
• Heavy-duty steel construction for longevity
• Inlet: 2.5-inch ID
• Outlet: 2.5-inch OD
• Overall Length: 77.00 inches
• Manufacturer Part Number: 17608.05
• Recommended for use with rubber exhaust hanger 17620.05
• Limited 5-year warranty

Fits 2023-2024 Honda Civic Type-R (FL5).

The MXP Front Pipe is engineered to reduce exhaust backpressure and improve turbo spool and throttle response on the FL5 Honda Civic Type-R. By replacing the restrictive factory unit with a higher-flow design, this front pipe facilitates more efficient gas evacuation between the downpipe and the cat-back exhaust system.

• Direct bolt-on installation to factory mounting points
• Mandrel-bent tubing for consistent internal diameter and optimized flow
• Heavy-duty flanges for a leak-free seal and structural durability
• Compatible with factory and most aftermarket exhaust components
• Manufacturer Part Number: MXFPFL5

Fits select 2015-2026 Ford Mustang GT, GT Premium, Bullitt, Mach 1, and Dark Horse models.

Give your S550 or S650 Coyote-powered Mustang a more aggressive, classic muscle car growl with the Mishimoto H-Pipe. This component is designed to replace the heavy, restrictive factory resonator, improving exhaust flow and increasing volume without the higher-pitched rasp often associated with X-pipes. Constructed from mandrel-bent 304 stainless steel, this pipe ensures maximum durability and corrosion resistance.

The cut-and-clamp design allows for a straightforward installation that utilizes factory mounting points. This H-pipe is compatible with both manual and automatic transmission vehicles and integrates seamlessly with either the stock axle-back or the Mishimoto axle-back exhaust system.

• Direct fit for 2015-2026 Ford Mustang GT, Mach 1, and Dark Horse
• Replaces restrictive stock resonator with a free-flowing H-pipe section for a deeper tone
• Full 304 stainless steel construction for superior longevity
• Mandrel-bent tubing maintains consistent diameter for optimal flow
• Cut-and-clamp design specifically engineered for the S550 and S650 chassis
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMEXH-MUS8-15HP

The MagnaFlow 10734 Smooth Transition T-Pipe is a precision-engineered universal component designed for custom exhaust fabrication. Unlike standard T-junctions that can create restrictive turbulence, this smooth transition design optimizes exhaust scavenging and flow efficiency. Constructed from high-grade, corrosion-resistant stainless steel, this pipe is built to withstand the thermal stress and environmental rigors of high-performance applications.

Each component is manufactured using CNC robotic techniques to ensure exact tolerances and consistent wall thickness throughout the 90-degree bends. This 2.50-inch T-pipe provides a reliable, durable foundation for dual-exhaust merges or custom plumbing setups, backed by MagnaFlow’s limited lifetime warranty.

• Part Type: Smooth Transition T-Pipe
• Material: Corrosion-resistant stainless steel
• Diameter: 2.50 inches
• Angle: 90/90 Degree
• Manufacturing: CNC precision robotic construction
• Manufacturer Part Number: 10734
• Fitment: Universal application for custom exhaust systems

Fits select 2013-2019 Buick Encore and Chevrolet Trax models (1.4L).

The BRExhaust 107-0286 Direct-Fit Front Pipe Kit is engineered to provide a seamless replacement for your vehicle's factory exhaust component. Constructed from high-grade stainless steel with mandrel-bent tubing, this kit ensures long-lasting durability and superior corrosion resistance compared to standard materials. The direct-fit design utilizes factory mounting points for a straightforward, bolt-on installation that requires no custom fabrication or welding.

This kit is designed to maintain your vehicle's original emissions compliance while restoring exhaust system integrity. Every component needed for a complete installation is included in a single package, ensuring you have the gaskets and hardware required to get back on the road quickly.

• Direct-Fit Design: Replaces factory front pipe without modifications.
• Durable Construction: Stainless steel with mandrel bends for maximum flow and lifespan.
• Complete Kit: Includes (5) bolts, (5) nuts, (1) 3-bolt gasket, (1) 2-bolt gasket, and (1) 3-inch band clamp.
• Emissions Compliant: Engineered to keep all factory emissions equipment intact.
• OE Interchange: 42366111, 42630792.
• Warranty: 2-year, unlimited mileage warranty.

Fits 2006-2012 Toyota RAV4 (2.4L, 2.5L, and 3.5L) Base, Limited, and Sport models.

The BRExhaust 107-0229 Direct-Fit Front Pipe Kit is a precision-engineered solution for restoring your vehicle's exhaust system to its original performance. Constructed from high-grade stainless steel with mandrel-bent tubing, this front pipe provides superior corrosion resistance and optimal exhaust flow compared to standard aluminized steel. Designed as a direct bolt-on replacement for OE part number 174100V020, it integrates seamlessly with existing factory mounting points and maintains full emissions compliance without the need for custom fabrication or welding.

• Durable stainless steel construction for long-term service life
• Mandrel bends ensure consistent pipe diameter and reduced backpressure
• Direct-fit design for a straightforward, bolt-on installation
• Complete kit includes (2) bolts, (1) spring bolt kit, (1) donut gasket, (1) ring gasket, and (2) nuts
• All hardware and gaskets are included in a single protective box
• Backed by a 2-year, unlimited mileage warranty

Fits 2003-2011 Saab 9-3 Aero, Arc, Linear, SE, Turbo4, and Vector (2.0L / 2.0T).

Restore the integrity and performance of your Saab 9-3 exhaust system with the BRExhaust Direct-Fit Front Pipe Kit. This kit is meticulously engineered as a bolt-on replacement for the factory assembly, eliminating the need for custom fabrication or welding. Constructed from high-grade stainless steel with mandrel bends, it provides superior corrosion resistance and optimal exhaust flow compared to standard aluminized piping. This front pipe maintains all factory emissions equipment, ensuring your vehicle remains compliant while regaining its original sound and efficiency.

• Stainless Steel Construction: Durable material resists oxidation and road salt for long-term reliability.
• Precision Mandrel Bends: Ensures consistent pipe diameter through every curve to reduce backpressure.
• Complete Installation Kit: Includes (1) 5-bolt gasket, (1) 2.25in U-bolt clamp, (3) bolts, and (3) nuts for a hassle-free setup.
• OE Interchange: Replaces factory part number 32019380.
• Warranty: Covered by a 2-year, unlimited mileage warranty.

Fits 2016-2024 Chevrolet Camaro LT, LT1, SS, and ZL1 (6.2L).

This Kooks 3-inch connection-back exhaust system is engineered to bridge the gap between Kooks headers and your factory exhaust components. Designed specifically for the sixth-generation Camaro, this mandrel-bent system allows you to retain your OEM muffler and exhaust tips while maximizing flow through the mid-section. It is an ideal solution for enthusiasts who want the performance gains of high-flow headers without sacrificing the factory look or exhaust valve functionality of the stock muffler.

• System Type: Connection-Back Exhaust (links headers to OEM muffler)
• Tubing Diameter: 3-inch
• Material: T304 Aircraft-Quality Stainless Steel
• Inlet: Designed for use with Kooks Headers
• Outlet: Connects to factory OEM muffler and tips
• Construction: Handcrafted and mandrel-bent in the USA
• Durability: Dyno and race tested for maximum power delivery
• Warranty: Limited Lifetime Warranty to the original purchaser
• Manufacturer Part Number: 22604181

Fits 2016-2024 Chevrolet Camaro SS and ZL1 (6.2L).

Streamline your exhaust system with Kooks High Flow Catted Connection Pipes. These pipes are engineered to bridge the gap between Kooks headers and your factory exhaust, providing a high-flow solution that maintains a catted configuration. Constructed from premium T304 aircraft-quality stainless steel, these connection pipes are designed to withstand high heat and resist corrosion under demanding street or track conditions. Each unit is handcrafted in the USA and dyno-tested to ensure maximum power gains and precise fitment.

• Diameter: 3-inch inlet x 2-3/4-inch outlet
• Material: T304 High-grade stainless steel
• Catalytic Converters: High-flow race-tested cats included
• Installation: Designed to connect Kooks headers to OEM exhaust path
• Manufactured: Handcrafted in the USA
• Manufacturer Part Number: 22603300
• Warranty: Limited Lifetime Warranty to the original purchaser

Fits 2016-2024 Chevrolet Camaro SS and 2022 Camaro ZL1 (6.2L).

Enhance the exhaust flow and performance of your LT1 or LT4 powered Camaro with Kooks High Flow Catted Connection Pipes. These pipes are engineered to bridge the gap between your factory exhaust manifolds and the OEM cat-back system, offering a direct-fit solution that reduces backpressure compared to restrictive factory converters. Handcrafted in the USA from T304 aircraft-quality stainless steel, these pipes are dyno-tested to ensure maximum power gains for street and track applications.

• 3-inch diameter inlet with 2-3/4 inch outlet for seamless OEM connection
• Integrated high-flow catalytic converters for improved exhaust scavenging
• Constructed from premium T304 stainless steel for long-term durability
• Handcrafted in the USA and backed by a limited lifetime warranty
• Designed specifically for the 6.2L LT1 and LT4 engines
• Manufacturer Part Number: 22603200

Fits 2020-2025 Chevrolet Corvette C8 Stingray, Z06, and E-Ray.

Improve the exhaust flow and performance of your mid-engine Corvette with these Kooks Ultra GREEN 3-inch Catted Connection Pipes. Engineered to bridge the gap between your headers and exhaust system, these pipes utilize high-flow Ultra GREEN catalytic converters designed to handle the increased heat and pressure of high-performance applications. Each set is handcrafted from premium T304 aircraft-quality stainless steel for maximum corrosion resistance and structural integrity.

Kooks designs these connection pipes to provide a precise fit, ensuring they stand up to the rigors of both street and track use. Every component is dyno and race-tested to verify power gains and durability, providing a professional-grade solution for Corvette owners looking to optimize their vehicle's output without sacrificing reliability.

• 3-inch mandrel-bent T304 stainless steel construction
• High-flow Ultra GREEN catalytic converters included
• Handcrafted in the USA for superior build quality
• Includes all necessary hardware for installation
• Limited Lifetime Warranty to the original purchaser
• Manufacturer Part Number: 21803300

Fits select 2015-2026 Ford Mustang GT, Bullitt, Mach 1, Shelby GT500, and Dark Horse models.

Kooks 3-inch dual connection pipes are engineered to bridge the gap between performance headers and your factory exhaust system. These pipes are handcrafted in the USA from mandrel-bent T304 aircraft-quality stainless steel, ensuring maximum exhaust flow and long-term durability. This system features Kooks' signature high-flow GREEN series catalytic converters, providing a balance of high-performance throughput and exhaust scrubbing.

Designed specifically for a precision fit, these connection pipes transition seamlessly to mate with the OEM outlet. Each component is dyno and race tested to ensure it meets the rigorous demands of street, track, and off-road applications.

• Pipe Diameter: 3-inch
• Material: T304 aircraft-quality stainless steel
• Catalytic Converters: Kooks GREEN high-flow series
• Connection Type: Dual connection pipes to OEM outlet
• Construction: Mandrel-bent tubing
• Country of Origin: USA
• Limited lifetime warranty to the original purchaser
• Manufacturer Part Number: 11513300

Fits 1989-1994 Nissan 240SX (S13).

The ISR Performance Series II Resonated Mid Section is engineered specifically for the S13 chassis to refine exhaust acoustics. As a "mid section only" component, it features an integrated resonator designed to cancel out high-frequency rasp and reduce cabin drone, providing a deeper, more controlled tone while maintaining optimal exhaust flow. This is a critical component for owners looking to modularly upgrade or replace specific sections of their Series II exhaust system.

• Manufacturer Part Number: IS-S2RMD-S13
• Chassis Fitment: Nissan 240SX (S13)
• Model Years: 1989-1994
• Type: Resonated Mid Section (Series II)
• Design: High-flow resonated pipe to minimize exhaust drone

Fits 1989-1994 Nissan 240SX (S13).

The ISR Performance Series II Non-Resonated Mid-Section is a direct replacement component engineered for enthusiasts seeking to maximize exhaust flow and achieve a more aggressive, uncorked tone. By eliminating the resonator found in standard mid-sections, this Series II pipe reduces exhaust backpressure and helps shed weight compared to more restrictive factory or resonated configurations.

Fabricated from high-quality stainless steel, this mid-section is designed to fit the S13 chassis exhaust path, ensuring a straightforward installation with existing Series II-compatible components. It is an essential modular piece for fine-tuning the performance and acoustics of your Nissan 240SX exhaust system.

• Manufacturer Part Number: IS-S2NRMD-S13
• Series: Series II
• Type: Non-Resonated Mid-Section
• Chassis Compatibility: Nissan S13 240SX
• Material: Stainless Steel

Fits 2022-2024 Toyota GR Corolla.

The Invidia Front Pipe with High Flow Catalytic Converter is designed to optimize exhaust scavenging and reduce backpressure directly after the turbocharger. By replacing the restrictive factory piping with a larger diameter, mandrel-bent solution, this front pipe allows the G16E-GTS engine to reach peak boost more efficiently. The integrated high-flow catalytic converter provides a significant increase in flow over the OE unit while maintaining a cleaner exhaust path compared to catless alternatives.

• Integrated high-flow catalytic converter for improved exhaust velocity and emissions compliance
• Precision mandrel-bent tubing ensures uniform diameter and minimizes turbulence
• Heavy-duty flanges designed for a leak-free seal with factory or aftermarket exhaust components
• Direct-fit bolt-on installation to factory mounting points
• Durable construction engineered to withstand high exhaust gas temperatures
• Manufacturer Part Number: HS22TGCFPCEA3L

Fits 2022-2024 Subaru WRX models equipped with a manual transmission.

The Invidia High Flow Catted Front Pipe is engineered to reduce exhaust backpressure and improve flow characteristics over the restrictive factory component. This "bottom" section replaces the secondary portion of the exhaust stream, utilizing a high-flow catalytic converter to facilitate better turbo spool and throttle response while maintaining a catted configuration. Designed as a direct bolt-on upgrade, it integrates seamlessly with the manual transmission chassis layout.

• Precision-engineered for 2022+ Subaru WRX (6MT) fitment
• Includes an integrated high-flow catalytic converter to optimize exhaust gas velocity
• Mandrel-bent construction ensures uniform pipe diameter and minimizes turbulence
• Direct replacement for the secondary OEM front pipe section
• Manufacturer Part Number: HS22SW4MFPCB

Fits 2016-2021 Honda Civic (1.5T).

The Invidia Front Pipe is a direct-fit exhaust upgrade designed for the 10th Generation Honda Civic equipped with the 1.5L turbocharged engine. This component replaces the restrictive factory pipe between the downpipe and the cat-back system, reducing backpressure and improving exhaust flow. It is engineered to bolt directly to factory mounting points, ensuring a seamless installation that maintains compatibility with both OEM components and most aftermarket exhaust systems.

• Specifically engineered for the 1.5T turbocharged engine
• Direct-fit replacement for the factory front pipe
• Designed to optimize exhaust velocity and improve turbo response
• Utilizes precision flanges for a secure, leak-free connection
• Manufacturer Part Number: HS16HC4FP6

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86.

The Invidia Over-Pipe (HS12SSTOPP) is engineered to eliminate the flow restrictions found in the factory exhaust system. By replacing the tight, uneven bends of the OE unit with a smooth, one-piece mandrel-bent design, this component optimizes exhaust gas velocity as it transitions from the header to the front pipe. This is a critical upgrade for owners looking to maximize the performance of the FA20 engine, whether naturally aspirated or forced induction.

• Construction: One-piece mandrel-bent tubing for uniform diameter and reduced turbulence.
• Performance: Increases exhaust flow efficiency to improve throttle response and power delivery.
• Fitment: Direct bolt-on replacement for the factory over-pipe; compatible with OEM and most aftermarket exhaust components.
• MPN: HS12SSTOPP

Vehicle Fitment:

• 2013-2016 Scion FR-S Base
• 2013-2017 Subaru BRZ Limited/Premium
• 2015 Subaru BRZ Series.Blue
• 2016 Subaru BRZ Series.HyperBlue
• 2017 Toyota 86 Base/Special Edition

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86 models.

The Invidia Front Pipe with High Flow EA300 CELL Cat is engineered to reduce exhaust backpressure and improve scavenging while maintaining a catalytic converter. By replacing the restrictive factory front pipe, this component allows for more efficient exhaust gas flow, supporting better throttle response and a more pronounced exhaust note. It is designed as a direct bolt-on upgrade that utilizes factory mounting locations for a precise fit.

• Integrated High-Flow EA300 CELL catalytic converter
• Direct-fit replacement for the restrictive OE front pipe
• Improved exhaust flow characteristics over stock components
• Durable construction designed for high-performance applications
• Manufacturer Part Number: HS12SSTFPCEA3

Fits 2009-2023 Nissan 370Z and Infiniti G37 models.

Invidia High Flow Catalytic Converters are engineered to reduce exhaust backpressure and improve engine efficiency by replacing restrictive factory ceramic cores with high-flow substrates. Constructed from 60mm mandrel-bent piping, these units facilitate faster exhaust gas scavenging, resulting in improved throttle response and power gains across the RPM range. The integrated heavy-duty brackets ensure a secure fitment that mimics the factory mounting points for long-term durability and vibration resistance.

• 60mm diameter mandrel-bent tubing for optimized exhaust velocity
• High-flow catalytic substrate reduces restriction while maintaining mid-section plumbing
• Includes integrated mounting brackets for a stable, direct-fit installation
• Designed as a bolt-on replacement for the OEM catalytic converters
• Manufacturer Part Number: HS09N7ZTPCB

Fits select 2015-2023 Audi A3, S3, TT, TTS and Volkswagen Arteon, Atlas, Golf, GTI, and Tiguan (1.8L / 2.0L).

The Injen SES3078TIP Turbo Inlet Pipe replaces the restrictive, prone-to-failure factory plastic component to maximize airflow into your Gen 3 turbocharger. Engineered with a 3.00" inlet outer diameter and a unibody cast aluminum housing, this inlet pipe provides a smooth, oversized path for air to reach the compressor. This design minimizes turbulence and drag, resulting in dyno-proven gains of up to 14 hp and 11 lb-ft of torque while sharpening throttle response and increasing turbo spool sound.

Built for the rigors of the engine bay, the SES3078TIP features a fully integrated CNC-machined PCV inlet and mounting bracket to ensure an OE-level seal and prevent hardware from loosening over time. The kit includes an automotive-grade, 3" reinforced silicone coupler and stainless steel band clamps with inner liners to protect the silicone from damage.

• Replaces factory plastic inlet with durable unibody cast aluminum
• 3.00" Outer Diameter minimizes intake restriction
• Precision CNC-machined fittings and integrated PCV inlet for a leak-free seal
• Dyno-proven gains of up to 14 hp and 11 lb-ft of torque
• Includes 3" reinforced silicone coupler and stainless steel hardware
• Simple bolt-on installation requires no cutting or drilling
• Compatible with 3.00" diameter intake tubing
• Manufacturer Part Number: SES3078TIP
• Backed by Injen’s Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase or use in California.

Fits select 2008-2013 Honda Fit GE6/GE8 models equipped with L13A or L15A engines.

The HKS SUS Center Pipe is engineered to optimize exhaust flow by replacing the restrictive factory mid-section. Constructed from high-grade stainless steel (SUS) for superior corrosion resistance and longevity, this center pipe reduces backpressure, allowing your L-series engine to breathe more efficiently. This leads to improved throttle response and a more resonant exhaust note without the drone often associated with lower-quality components.

• Direct-fit replacement for the factory center section
• High-quality SUS stainless steel construction for maximum durability
• Designed specifically for the GE6 and GE8 chassis (L13A/L15A engines)
• Mandrel-bent piping for smooth, consistent exhaust gas velocity
• Manufacturer Part Number: 33004-AH002

The HKS Exhaust Joint Pipe is engineered to reduce backpressure and improve exhaust flow by replacing the restrictive factory overpipe. Designed specifically for the Toyota 86 and Subaru BRZ platform, this component eliminates the narrow, crushed sections found in the original equipment (OE) piping that often limit performance on tuned or forced-induction engines.

This joint pipe is constructed from high-grade, mandrel-bent stainless steel to ensure a consistent 60mm internal diameter. It features precision-machined flanges for a leak-free seal and bolts directly to factory mounting locations without the need for modification.

• Manufacturer Part Number: 14011-AT001
• Material: High-quality stainless steel
• Piping Diameter: 60mm
• Installation: Direct bolt-on to OE mounting points
• Fits: Toyota 86 and Subaru BRZ

Fits 1993-1995 Mazda RX-7 Base, R1, R2, and Touring models. The GReddy 1-Piece Compression Pipe (12040911) is engineered to replace the restrictive factory multi-piece intake piping between the intercooler and the throttle body. By utilizing a single-piece design, this component eliminates common boost leak points found in aging OE rubber or plastic connectors, providing a more secure and efficient path for pressurized intake air.

• Direct fit for 1993-1995 Mazda RX-7 (FD3S)
• Single-piece construction improves airflow and pressure stability
• Reduces potential for boost leaks compared to factory multi-piece units
• Polished finish for enhanced under-hood appearance
• Manufacturer Part Number: 12040911

Fits 2006-2011 Honda Civic Si.

The GReddy Exhaust Adapter (MPN 11050104) is an essential component for owners looking to install a GReddy coupe-specific cat-back exhaust system onto a 2006-2011 Honda Civic Si Sedan. This adapter compensates for the chassis length difference between the coupe and sedan models, ensuring the exhaust exit points and hangers align correctly on the longer sedan body.

• Chassis Conversion: Adapts 2006-2011 Civic Si Coupe exhausts for use on Sedan models.
• System Specific: Engineered to work exclusively with GReddy brand exhaust systems.
• Direct Fitment: Designed for 8th Generation Honda Civic Si (2006-2011) models.
• Manufacturer Part Number: 11050104