Fits 2008-2014 Mitsubishi Lancer Evolution GSR, MR, and MR Touring models equipped with the 4B11T engine.

Carrillo Pro-H beam connecting rods are engineered to withstand the extreme cylinder pressures and high RPMs of performance-built Mitsubishi 4B11T engines. This set features the heavy-duty Pro-H beam profile, providing the structural integrity required for high-horsepower forced induction applications. To ensure maximum clamping force and fatigue resistance, these rods come equipped with premium 3/8" CARR multiphase bolts, which offer superior tensile strength compared to standard fasteners.

• Manufacturer Part Number: SCR4622-4
• Rod Beam Style: Pro-H
• Fastener Type: 3/8" CARR Bolts
• Engine Compatibility: Mitsubishi 4B11T
• Application: High-performance street and competition use

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86 (4U-GSE).

Reinforce your engine's rotating assembly with the Brian Crower Sportsman Series connecting rods. Engineered specifically for the high-revving 4U-GSE engine found in the ZN6/ZC6 platform, these rods provide the structural integrity needed for forced induction or high-RPM naturally aspirated builds. Each rod is manufactured from high-tensile 4340 steel and undergoes a rigorous multi-stage heat treatment process to ensure maximum fatigue strength and durability under load.

These rods come equipped with premium ARP2000 fasteners, rated at 220,000 psi, providing superior clamping force compared to standard factory hardware. This kit (MPN: BC6619) is a direct-fit solution for enthusiasts looking to replace stock rods that are prone to deflection in performance applications.

• Series: Sportsman
• Center-to-Center Length: 5.094in
• Hardware: ARP2000 Fasteners included
• Material: 4340 Chromoly Steel
• Engine Application: 4U-GSE / FA20
• Manufacturer Part Number: BC6619

Fits 2002-2014 Subaru Impreza WRX/STI and 2005 Saab 9-2X Aero (EJ205/EJ257 engines).

Brian Crower BC625+ connecting rods are designed for high-horsepower Subaru EJ series builds that require superior fastener strength and reliability. These rods are equipped with premium ARP Custom Age 625+ fasteners, offering significantly higher tensile strength than standard ARP2000 bolts to handle extreme cylinder pressures and high-RPM stress. Precision machined to a 5.141-inch center-to-center length, the BC6608 set provides the durability needed for competitive forced-induction applications.

• Manufacturer Part Number: BC6608
• Rod Series: BC625+
• Center-to-Center Length: 5.141"
• Fasteners: ARP Custom Age 625+
• Engine Compatibility: Subaru EJ205 / EJ257
• Direct fit for OE journal sizes

Fits 2010-2013 Hyundai Genesis Coupe (2.0L / 2.0T).

Reinforce your engine's bottom end with Brian Crower Sportsman Series connecting rods. Designed specifically for the 2.0L turbocharged engine found in the Hyundai Genesis Coupe, these rods (MPN: BC6519) provide the structural integrity required to handle the increased loads and cylinder pressures associated with high-performance builds and forced induction tuning.

• Brand: Brian Crower
• Series: Sportsman
• Part Number: BC6519
• Application: Direct fit for 2.0T Theta engines
• Fitment: Fits all 2010-2013 Hyundai Genesis Coupe 2.0T submodels including Premium, R-Spec, and Track.

Fits 2010-2013 Hyundai Genesis Coupe (2.0L / 2.0T).

Brian Crower BC625+ connecting rods are engineered for high-performance builds where structural integrity is paramount. Designed to withstand the increased cylinder pressures of forced induction and high-RPM environments, these rods provide a significant strength upgrade over factory components. As part of the BC625+ series, this set is built for builders who require maximum reliability in their 2.0T Hyundai engine.

• Manufacturer: Brian Crower
• Series: BC625+
• Part Number: BC6518
• Fitment: 2010-2013 Hyundai Genesis Coupe (All 2.0T submodels)
• Engine Compatibility: 2.0L / 2.0T
• Applications: High-performance street, circuit, and drag racing

Fits select 1985-1991 Toyota Corolla and MR2 models (4AGE).

Brian Crower Sportsman Series connecting rods provide the essential strength and reliability required for high-performance Toyota 4AGE builds. Designed as a significant upgrade over factory units, these rods are engineered to withstand the increased stresses of high-RPM operation and forced induction. Each rod is manufactured to exacting tolerances and comes equipped with premium ARP2000 fasteners to ensure maximum clamping force and rod cap stability under extreme loads.

• Engine Compatibility: Toyota 4AGE
• Series: Sportsman
• Center-to-Center Length: 4.803in
• Fasteners: ARP2000 Bolts
• Manufacturer Part Number: BC6355

Fits 1988-1995 Toyota Celica and MR2 Turbo models equipped with the 3SGTE engine.

Brian Crower Sportsman Series connecting rods provide the internal strength necessary for high-performance builds. These H-beam rods are engineered to bridge the gap between stock components and extreme race-spec hardware, offering a reliable solution for enthusiasts increasing boost or RPM on the Toyota 3SGTE platform. Each rod is CNC machined from high-strength 4340 steel and includes heavy-duty ARP2000 fasteners to ensure superior clamping force and fatigue life.

• Manufacturer: Brian Crower
• Part Number: BC6351
• Series: Sportsman
• Engine Compatibility: Toyota 3SGTE
• Center-to-Center Length: 5.410 inches
• Fasteners: ARP2000 3/8-inch bolts
• Construction: 4340 billet steel H-beam

Fitment Table:

• 1988-1992 Toyota Celica All Trac
• 1993 Toyota Celica GTS All Trac
• 1991-1995 Toyota MR2 Turbo

Fits 1991-2001 Nissan 240SX and Altima models equipped with the KA24DE engine.

Brian Crower bROD connecting rods are engineered for high-performance Nissan KA24DE builds that demand superior strength and reliability. Designed to withstand significantly higher cylinder pressures and RPM ranges than factory components, these rods are a critical upgrade for forced induction or high-compression naturally aspirated engines. Each rod is paired with genuine ARP2000 fasteners, ensuring the precise clamping force and big-end stability required for high-stress applications.

• Manufacturer Part Number: BC6219
• Series: bROD
• Rod Length: 6.495 inches
• Fasteners: ARP2000 included
• Engine Application: Nissan KA24DE

Vehicle Fitment

Fits 1989-1998 Nissan 240SX (SR20DET). Brian Crower BC625+ connecting rods are engineered for high-horsepower applications and extreme cylinder pressures. These H-beam rods are CNC machined from 4340 steel and feature a deep-radiused cap to prevent stress risers under high RPM loads. Equipped with ARP Custom Age 625+ fasteners, this set provides the highest possible clamping force for serious forced induction builds.

• Manufacturer Part Number: BC6208
• Center-to-Center Length: 5.366 in
• Material: 4340 Chromoly Steel
• Hardware: ARP Custom Age 625+ Fasteners included
• Series: BC625+ Pro Series
• Fitment: Nissan SR20DET 4-cylinder engines

Fits 2000-2003 Honda S2000 Base models (F20C).

Brian Crower bROD connecting rods are engineered to provide the structural integrity required for high-horsepower and high-RPM Honda F20C engines. These H-beam rods are manufactured from high-tensile 4340 steel, providing a significant strength advantage over factory components. Each rod is equipped with 3/8" ARP2000 fasteners, which offer superior clamping force and fatigue resistance compared to standard hardware. Whether you are building for forced induction or a high-compression naturally aspirated setup, these rods ensure the rotating assembly can handle increased cylinder pressures and stress.

• Material: Forged 4340 Chromoly Steel
• Fasteners: High-strength ARP2000 bolts included
• Beam Style: H-Beam (bROD series)
• Center-to-Center Length: 6.023in
• Manufacturer Part Number: BC6065

Fits 2004-2009 Honda S2000 Base and CR models equipped with the F22C engine.

Brian Crower bROD series connecting rods are engineered to provide the structural integrity necessary for high-performance Honda F22C builds. These H-beam rods are designed to replace factory components with a robust 4340 steel construction, maintaining a 5.893-inch center-to-center length. By utilizing a high-strength H-beam profile, these rods offer increased resistance to bending and twisting under high-RPM or forced induction loads.

Each rod set comes equipped with premium ARP2000 fasteners, providing the clamping force required to secure the rod caps during extreme operation. These rods are a direct-fit solution for enthusiasts looking to reinforce the bottom end of their S2000 drivetrain.

• Manufacturer Part Number: BC6064
• Series: bROD
• Length: 5.893in
• Engine: Honda F22C
• Fasteners: ARP2000 Bolts included
• Material: 4340 Chromoly Steel

Fits select 2002-2011 Honda Civic and 2002-2006 Acura RSX models with K24A engines.

Brian Crower LightWeight bROD connecting rods are designed to reduce reciprocating mass in high-performance K24A engine builds. By minimizing weight without sacrificing structural integrity, these rods allow for faster engine acceleration and improved stability at high RPMs. Each rod is CNC machined from premium 4340 chromoly steel and undergo rigorous quality control to ensure precise tolerances for big end and small end bore alignment.

• Manufacturer Part Number: BC6052
• Rod Series: LightWeight bROD
• Center-to-Center Length: 5.985"
• Fasteners: Included 3/8" ARP2000 bolts
• Material: 4340 Chromoly Steel
• Engine Application: Honda/Acura K24A

These rods come equipped with ARP2000 fasteners, providing the clamping force necessary to handle increased cylinder pressures and high-revving applications. Whether you are refreshing a street build or prepping a dedicated track car, the BC LightWeight bROD series offers the balance of durability and weight reduction required for the K-series platform.

Fits select 2002-2011 Acura RSX Type-S and Honda Civic Si (K20A2 / K20Z3).

Engineered for high-RPM applications where reducing reciprocating mass is critical, the Brian Crower Lightweight bROD series offers a significant weight savings over standard rod designs without sacrificing structural integrity. These connecting rods are designed specifically for the K20 engine platform, featuring a 5.473-inch center-to-center length to maintain proper engine geometry while improving rotating assembly efficiency.

Each rod set is equipped with high-tensile ARP2000 fasteners, providing the clamping force and fatigue resistance necessary to handle increased cylinder pressures and high-revving performance. These rods are a direct choice for builders seeking a balance of strength and reduced weight in naturally aspirated or moderate boost K-series configurations.

• Manufacturer Part Number: BC6051
• Series: Lightweight bROD
• Center-to-Center Length: 5.473 inches
• Included Hardware: ARP2000 Fasteners
• Engine Compatibility: Honda K20A2, K20Z3

Fits select 2002-2011 Acura RSX and Honda Civic models with K24A engines.

Brian Crower BC625+ connecting rods are designed for high-horsepower applications where standard rods fail. These H-beam rods are CNC machined from high-tensile 4340 billet steel, providing the durability needed for high-RPM and forced induction K24A builds. This specific set includes ARP Custom Age 625+ fasteners, which offer superior tensile strength and clamping force compared to standard ARP2000 hardware, ensuring the bottom end remains secure under extreme cylinder pressures.

• Manufacturer Part Number: BC6045
• Rod Series: BC625+
• Center-to-Center Length: 5.985"
• Fasteners: ARP Custom Age 625+
• Material: 4340 Billet Steel
• Application: Honda/Acura K24A

Fits select 2002-2011 Acura RSX and Honda Civic models (K24A).

Engineered for high-stress applications, Brian Crower bROD connecting rods provide the internal strength necessary for high-performance K24A engine builds. These rods are designed to bridge the gap between OEM components and full-race hardware, offering a significant upgrade in tensile strength and fatigue resistance for forced induction or high-RPM naturally aspirated setups.

Every set includes genuine ARP2000 fasteners, the industry standard for high-strength rod bolts, rated to 220,000 psi. These fasteners ensure superior clamping force and housing bore stability under extreme loads. Whether you are performing a K-series swap or refreshing a street-strip build, these BC rods provide the durability required to protect your rotating assembly.

• Manufacturer Part Number: BC6042
• Rod Length: 5.985"
• Fasteners: ARP2000 3/8" bolts included
• Series: bROD
• Engine Application: Honda/Acura K24A

Vehicle Fitment:

• 2002-2006 Acura RSX (Base, Type-S)
• 2002-2011 Honda Civic (DX, EX, EX-L, GX, HX, Hybrid, LX, Si, and Special Editions)

Fits select 1988-2001 Acura Integra and Honda Civic, CR-V, CRX, and Civic del Sol (B18A/B / B20).

Brian Crower bROD connecting rods are engineered to provide the durability and structural integrity required for high-performance B-series engine builds. Designed specifically for the B18A, B18B, and B20 engine platforms, these rods are a necessary upgrade for high-RPM reliability and increased power handling. Each rod features a 5.394-inch center-to-center length and comes equipped with premium ARP2000 fasteners to ensure superior clamping force and housing bore stability under extreme loads.

• Manufacturer Part Number: BC6019
• Series: Brian Crower bROD
• Center-to-Center Length: 5.394in
• Fasteners: ARP2000 threaded bolts included
• Compatibility: Engineered for B18A, B18B, and B20 engine blocks

Fits select 2017-up Honda Civic, Accord, and CR-V models equipped with L15B5 or L15B7 engines.

Brian Crower ProH2K connecting rods are engineered to provide the structural integrity required for high-horsepower turbocharged L15 builds. As a critical upgrade over factory components, these H-beam rods are designed to withstand increased cylinder pressures and higher rotational speeds without the risk of bending or fatigue failure.

• Manufactured from aerospace-grade 4340 billet chromoly steel for maximum tensile strength.
• CNC machined to exacting tolerances for consistent big-end and small-end dimensions.
• Equipped with genuine ARP2000 3/8" fasteners rated at 220,000 psi for secure clamping.
• Shot-peened finish to relieve surface stress and improve overall component longevity.
• Radial groove in the pin bushing ensures consistent lubrication to the wrist pin.
• Manufacturer Part Number: BC6007

Each set includes a full complement of rods and ARP2000 hardware, providing a robust foundation for builds involving upgraded turbochargers and aggressive tuning.

Fits VW 2.0T TSI engines.

The BoostLine connecting rod kit is engineered specifically for high-horsepower forced induction applications where reliability is paramount. These rods feature a signature three-pocket design that maximizes strength-to-weight ratios, providing the rigidity required to handle increased cylinder pressures in modified 2.0T TSI builds. Forged from high-quality steel and finished to exacting tolerances, they serve as a direct upgrade over factory components to prevent rod failure during high-boost operation.

• Manufacturer Part Number: VW5669-905+
• Center-to-Center Length: 144mm
• Wrist Pin Diameter: 23mm
• Hardware Included: ARP 625+ Custom Age fasteners
• Engine Compatibility: 2.0T TSI
• Construction: Patent-pending 3-pocket forged design

Strengthen your engine's bottom end with the BoostLine Connecting Rod Kit, engineered specifically for high-output VW 2.0T TSI applications. These rods utilize a patented three-pocket design that combines the best characteristics of I-beam and H-beam rods, providing massive increase in strength to handle high boost levels and increased RPM without unnecessary weight.

• Fits VW 2.0T TSI engines (2.0T)
• Center-to-Center Length: 144mm
• Wrist Pin Diameter: 23mm
• Forged construction for extreme durability in forced induction setups
• Equipped with high-strength ARP rod bolts
• Manufacturer Part Number: VW5669-905

Designed specifically for high-output forced induction builds, the BoostLine Connecting Rod Kit (MPN: VW5669-866) provides the structural integrity required for modified Volkswagen 2.0T TSI engines. These rods are engineered to manage the increased cylinder pressures and torque loads found in high-boost applications where factory components often reach their failure point.

• Engine Application: Volkswagen 2.0T TSI
• Center-to-Center Length: 144mm
• Wrist Pin Diameter: 22mm
• Manufacturer Part Number: VW5669-866
• Ideal for high-horsepower street and track builds

Each rod is manufactured to exacting tolerances to ensure consistent balance and fitment within the rotating assembly. This kit is a direct performance upgrade for builders looking to reinforce the bottom end of their 2.0T engine for long-term reliability under extreme conditions.

Engineered specifically for high-performance forced induction applications, this BoostLine Connecting Rod Kit provides the structural integrity needed for high-boost Subaru EJ20 and EJ25 turbo engines. These rods are designed to bridge the gap between traditional H-beam and I-beam designs, offering superior strength-to-weight ratios for demanding builds.

• Direct fit for Subaru EJ20 and EJ25 Turbocharged engines
• Center-to-Center Length: 130.5mm
• Manufactured from high-strength forged steel for maximum durability
• Designed to handle increased cylinder pressures in extreme turbo applications
• Precisely balanced for high-RPM stability
• Manufacturer Part Number: SB5137-905

Engineered for high-boost and high-horsepower applications, this BoostLine Connecting Rod Kit (HN5658-866) is designed specifically for the Honda K20C engine platform. These rods utilize a patented three-pocket design that provides the massive rotating mass strength of an I-beam while maintaining the weight efficiency needed for high-RPM stability.

• Engine Compatibility: Honda K20C
• Center-to-Center Length: 143.66mm
• Construction: High-strength forged steel
• MPN: HN5658-866
• Ideal for turbocharged and high-compression performance builds

Designed for high-horsepower Honda B18C engines, the BoostLine 138mm Connecting Rod Kit is engineered to withstand the extreme cylinder pressures of forced induction and high-compression builds. These rods bridge the gap between traditional H-beam and I-beam designs, offering superior strength for turbocharged or supercharged applications.

Each rod features a unique, patent-pending 3-pocket design forged from high-quality 4340 chromoly steel. This hybrid geometry provides the massive kinetic energy absorption of an I-beam while maintaining a competitive weight profile. Precision-machined to exacting tolerances, this kit ensures reliable performance under the most demanding racing conditions.

• Center-to-Center Length: 138mm
• Engine Application: Honda B18C
• Material: Forged 4340 Chromoly Steel
• Hardware: Includes premium high-strength ARP 2000 rod bolts
• Design: Patent-pending 3-pocket hybrid geometry
• Manufacturer Part Number: HN5433-827