Fits 1994-2001 Acura Integra GS-R and Type R models equipped with the B18C engine.

Skunk2 Alpha Series Connecting Rods are engineered for high-horsepower builds, providing a reliable H-beam design rated to handle over 900 HP. Each rod is forged from select 4340 chromoly steel using a two-piece forging process. This method optimizes grain orientation along the rod cap, significantly increasing strength and fatigue resistance compared to standard one-piece forgings. To ensure structural integrity, every rod undergoes comprehensive heat-treating, tempering, shot-peening, and magna-flux inspection.

Engineered using Finite Element Analysis (FEA), the straight-beam design distributes stress across a larger surface area to minimize wear. For superior lubrication, these rods feature dual-pin oil passages at the wrist pin end, delivering consistent cooling and oiling throughout the entire engine cycle. These rods come equipped with high-tensile 3/8-inch ARP2000 bolts and bronze wrist pin bushings for professional-grade durability.

• Manufacturer Part Number: 306-05-1120
• Material: Forged 4340 Chromoly Steel
• Design: H-Beam with Dual-Pin Oil Passages
• Length: 138.00mm
• Weight: 510 grams (Balanced +/- 1g)
• Hardware: 3/8-in ARP2000 / Skunk2 Bolts
• Wrist Pin Bushings: Bronze
• Rating: 900+ HP Capable

Fits 1992-1995 Honda Civic (EX, Si) and Civic del Sol (Si) equipped with D16 or ZC engines.

Skunk2 Alpha Series Connecting Rods provide a high-strength foundation for performance D-series builds. Forged from 4340 chromoly steel, these rods utilize a precision H-beam design developed through Finite Element Analysis (FEA) to identify and reinforce high-stress points. This straight-beam configuration distributes stress across a larger surface area than standard tapered rods, providing the structural integrity required to handle more than 900 HP.

These rods are manufactured using a two-piece forging process that optimizes grain orientation along the rod cap, increasing strength perpendicular to the stress exerted on the beam. To maximize durability, Skunk2 incorporates dual-offset oil passages at the pin end, ensuring consistent lubrication and cooling for the wrist pin during every phase of the engine cycle. Each rod is shot-peened for fatigue resistance, heat-treated, and magna-fluxed to ensure material integrity.

• Material: Forged 4340 Chromoly Steel
• Design: FEA-Optimized H-Beam
• Hardware: 3/8-in ARP2000/Skunk2 Bolts
• Length: 137.00mm
• Weight: 509g (Balanced +/- 1 Gram)
• Bushings: Bronze Wrist Pin Bushings
• Rating: 900+ HP Capable
• Finish: Shot-Peened and Magna-flux Inspected
• Manufacturer Part Number: 306-05-1110

Fits select 1989-2004 Nissan 240SX, Altima, Axxess, D21, Frontier, Pickup, Stanza, and Xterra.

Eagle H-Beam connecting rods are engineered for competition use and high-load performance applications. These rods are manufactured from certified 4340 steel using a two-piece forging process that ensures consistent grain flow. Every rod is fully machined and shot-peened to increase fatigue life and eliminate surface stress risers. Sizing is maintained to exact tolerances to ensure a precise fit. Each weight-matched set includes high-strength ARP 2000 bolts for increased tensile strength and reliable power-handling capability.

• Forged from certified 4340 chromoly steel
• Two-piece forging process for superior structural integrity
• Fully machined and shot-peened surface finish
• Includes premium ARP 2000 cap screws
• Weight-matched for balanced engine operation

• Manufacturer Part Number: CRS6496N3D
• Material: Forged 4340 Steel
• Bolt Type: ARP 2000
• Quantity: Set of 4

Fits Ford 2.0L EcoBoost engines.

Eagle Specialty Products H-Beam connecting rods are engineered for the high-stress demands of competition use. These rods are manufactured from two-piece 4340 steel forgings to provide superior strength and durability compared to factory components. Each rod features a fully machined surface and is shot-peened to improve fatigue life and stress relief.

Sizing is held to exact tolerances to ensure a precise fit during engine assembly. These rods are sold as a weight-matched set of four, ensuring balanced rotational mass across all cylinders for improved high-RPM stability and engine longevity.

• Manufacturer Part Number: CRS6136E3D
• Material: Forged 4340 Chromoly Steel
• Design: H-Beam
• Finish: Fully Machined and Shot-Peened
• Quantity: Set of 4
• Application: Competition Use

Designed for the high-revving demands of competition use, these Eagle H-Beam connecting rods provide the structural integrity required for high-horsepower Honda F20C engine builds. Each rod is manufactured from a two-piece 4340 chromoly steel forging to ensure consistent grain flow and superior strength over factory cast units.

To maximize fatigue life, every rod is fully machined and shot-peened to eliminate surface stress risers. These rods are delivered as a weight-matched set, ensuring a balanced rotating assembly for smooth operation at high RPMs. For maximum clamping force and security under load, the set comes equipped with high-tensile ARP 2000 bolts.

• Engine Application: Honda F20C
• Material: Forged 4340 Chromoly Steel
• Design: H-Beam
• Included Hardware: ARP 2000 Rod Bolts
• Manufacturing: Fully Machined and Shot-Peened
• Weight-matched for balanced rotation
• Manufacturer Part Number: CRS6023A3D

Fits 2002-2010 Acura TSX and Honda Accord, CR-V, and Element models equipped with the K24 engine.

Designed for high-performance and competition applications, these Eagle H-Beam connecting rods are engineered to withstand the rigors of increased horsepower and torque. Each rod is manufactured from a two-piece forged 4340 steel process to ensure superior grain flow and structural integrity. The rods undergo a thorough machining process and are shot-peened to increase fatigue life and remove potential stress risers.

Eagle maintains tight tolerances on sizing and provides these rods in weight-matched sets for balanced engine operation. To maximize clamping force and rod-end stability under high RPMs, this set is equipped with premium ARP 2000 rod bolts.

• Forged from 4340 steel for maximum tensile strength
• H-Beam design optimized for load distribution and rigidity
• Center-to-center length: 5.984 inches
• Wrist pin diameter: 0.864 inches
• Shot-peened finish to improve durability
• Includes high-strength ARP 2000 rod bolts
• Weight-matched set of 4 rods
• Manufacturer Part Number: CRS5984K3D

Fits 2003-2005 Dodge Neon SRT-4 (2.4L).

Engineered for competition and high-horsepower applications, these Eagle H-Beam connecting rods provide the strength and durability required for forced induction and high-RPM use. Each rod is manufactured from a two-piece 4340 steel forging, then fully machined and shot-peened to improve fatigue life and relieve internal stresses. Sizing is held to exact tolerances for a precise fit on your 2.4L crankshaft journals.

These rods come equipped with high-tensile ARP 2000 bolts to ensure superior clamping force and reliability under extreme cylinder pressures. To maintain engine balance and reduce vibration, Eagle delivers these as a weight-matched set.

• Forged 4340 steel H-Beam construction
• Equipped with ARP 2000 rod bolts
• Fully machined and shot-peened surface
• Weight-matched set for rotating assembly balance
• Designed for competition use
• Manufacturer Part Number: CRS5945D3D

Designed for Mitsubishi 4G63 6-Bolt engines, these Eagle Specialties H-Beam forged connecting rods provide the structural integrity required for high-horsepower and competition applications. This specific set is configured with a 22mm wrist pin bore to accommodate newer-style piston designs in 6-bolt engine builds.

Manufactured from two-piece 4340 forged steel, these rods are fully machined and shot-peened to relieve surface stresses and improve fatigue life. Each rod is held to exacting tolerances and the set is weight-matched to ensure balanced rotating assembly performance. To manage the increased tensile loads of high-performance builds, these rods come equipped with premium ARP 2000 series bolts.

• Engine Application: Mitsubishi 4G63 (6-Bolt)
• Material: Forged 4340 Steel
• Wrist Pin Bore: 22mm
• Hardware: ARP 2000 Bolts included
• Manufacturing: Two-piece forging, shot-peened surface
• Weight: Matched set (+/- 1g)
• Manufacturer Part Number: CRS5900MC3D

Fits select 1993-2006 Eagle Talon, Mitsubishi Eclipse, Lancer Evolution, and Plymouth Laser (4G63 7-Bolt engines).

Eagle Specialty Products H-Beam connecting rods are engineered for high-horsepower competition use. These rods are manufactured from forged 4340 steel using a two-piece forging process that ensures superior structural integrity. To maximize durability under stress, each rod undergoes a full machining process and is shot-peened to increase fatigue life. Sizing is held to exact tolerances for a precise fit, and each set is weight-matched to ensure balanced engine operation.

This set is upgraded with ARP 2000 rod bolts, providing the high-tensile clamping force necessary for high-boost applications on the Mitsubishi 4G63 2nd Gen platform.

• Material: Forged 4340 Steel
• Design: H-Beam
• Engine Fitment: Mitsubishi 4G63 2nd Gen (7-Bolt Crank)
• Piston Pin Size: 22mm
• Hardware: ARP 2000 Bolts included
• Surface Finish: Fully Machined and Shot-Peened
• Quantity: Set of 4
• Manufacturer Part Number: CRS5900MB3D

Fits 1990-1992 Mitsubishi Eclipse, Eagle Talon, and Plymouth Laser (4G63 1st Gen).

Eagle H-Beam connecting rods are engineered for high-stress competition use, providing the structural integrity required for forced induction and high-RPM builds. Forged from certified 4340 chromoly steel, these rods utilize a two-piece forging process and undergo extensive machining and shot-peening to ensure maximum fatigue life and strength.

Each set is weight-matched to within +/- 1 gram to ensure engine balance and smooth operation. For increased clamping force and reliability under extreme cylinder pressures, these rods come equipped with genuine ARP 2000 bolts. Sizing is held to exacting tolerances to ensure a precise fit for 1st generation 4G63 6-bolt engines utilizing a 21mm piston pin.

• Manufacturer Part Number: CRS5900MA3D
• Material: Forged 4340 Chromoly Steel
• Design: H-Beam with 21mm Piston Pin bore
• Hardware: Included ARP 2000 Rod Bolts
• Quantity: Weight-matched set of 4
• Surface Finish: Fully machined and shot-peened

Fits select Ford models (2.3L).

Eagle 4340 H-beam connecting rods provide the structural integrity required for high-performance Ford 2.3L EcoBoost builds. Each rod is manufactured from a two-piece 4340 steel forging to ensure consistent grain flow and maximum strength. The surfaces are fully machined and shot-peened to relieve stress and improve fatigue life, making them a reliable choice for competition use and high-boost applications.

These rods are sold as a weight-matched set and held to exact sizing tolerances to ensure consistent engine assembly. To handle increased power-handling requirements, this set comes equipped with premium ARP 2000 rod bolts.

• Manufactured from forged 4340 steel for superior tensile strength
• Two-piece forging design for optimal grain structure
• Fully machined and shot-peened to reduce stress risers
• Equipped with high-strength ARP 2000 bolts
• Sold as a weight-matched set for balanced rotation
• Manufacturer Part Number: CRS5876E3D

Fits select 2000-2010 Chevrolet, Pontiac, and Saturn models including Cobalt, HHR, Malibu, Cavalier, G5, Grand Am, Sunfire, Ion, and Vue (2.2L).

Eagle H-Beam connecting rods provide the strength and reliability required for high-stress competition engines and forced induction applications. These rods are manufactured from a two-piece 4340 steel forging to ensure optimal grain flow and structural integrity. Each rod is fully machined and shot-peened to relieve surface stress, significantly increasing fatigue life under heavy loads.

To ensure consistent performance, these rods are sold as a weight-matched set and come equipped with high-tensile ARP 2000 bolts for superior clamping force. Sizing is held to exact tolerances for a precise bearing fit and reliable oil clearance.

• Material: Forged 4340 chromoly steel
• Design: H-Beam configuration for high-strength-to-weight ratio
• Hardware: Includes high-strength ARP 2000 rod bolts
• Finish: Fully machined and shot-peened
• Tolerance: Weight-matched set with precision sizing
• Application: Recommended for competition use
• MPN: CRS5765C3D

Fits select 1997-2006 Audi A4, TT and Volkswagen Beetle, Golf (1.8L).

Eagle H-Beam connecting rods provide the structural integrity required for high-performance and competition 1.8L builds. These rods are manufactured from a two-piece 4340 steel forging, a process that optimizes grain flow for superior strength compared to cast or billet alternatives. Each rod is fully machined and shot-peened to reduce surface stress and improve fatigue life, ensuring durability under high-boost or high-RPM conditions.

Sizing is held to extremely tight tolerances, and each set is weight-matched to ensure rotating assembly balance. To handle increased cylinder pressures and reciprocating loads, this set includes premium ARP 2000 bolts, providing significantly higher clamping force than standard fasteners. These rods are an essential upgrade for any 1.8L engine undergoing a performance rebuild.

• Manufacturer Part Number: CRS5669A3D
• Material: Forged 4340 Chromoly Steel
• Design: H-Beam profile for maximum rigidity
• Fasteners: Includes ARP 2000 cap screws
• Finish: Fully machined and shot-peened
• Quantity: Weight-matched set of 4 rods

Fits Mitsubishi 4B11T engines.

Engineered for high-stress competition environments, these Eagle Specialty Products standard H-beam connecting rods provide the structural integrity required for forced induction and high-RPM builds. Each rod is manufactured from a two-piece forged 4340 steel process to ensure superior grain flow and durability. The surfaces are fully machined and shot-peened to eliminate stress risers, while sizing is maintained to exceptionally tight tolerances for a consistent fit across all journals.

This set comes equipped with 3/8-inch ARP 2000 bolts, significantly increasing the power-handling capacity over factory components. To ensure rotating assembly balance and smooth engine operation, these rods are sold as a precision weight-matched set.

• Manufacturer Part Number: CRS5659M3D
• Material: Forged 4340 Steel
• Design: H-Beam
• Hardware: 3/8" ARP 2000 Bolts
• Surface Finish: Fully Machined and Shot-Peened
• Quantity: Set of 4
• Recommended for competition use

Engineered for high-stress competition environments, these Eagle H-Beam connecting rods provide the structural integrity required for high-horsepower Honda H22 engine builds. Forged from 4340 steel, each rod utilizes a two-piece forging process to ensure optimal grain flow and superior tensile strength.

Every set is weight-matched and held to exacting tolerances to ensure balanced engine rotation and reduced vibration. The surfaces are fully machined and shot-peened to increase fatigue life by removing surface stressors. These rods come equipped with genuine ARP 2000 bolts, providing the enhanced clamping force and reliability necessary for high-performance applications.

• Manufacturer Part Number: CRS5630H3D
• Material: Forged 4340 chromoly steel
• Design: H-Beam configuration
• Hardware: Included ARP 2000 bolts
• Finish: Fully machined and shot-peened
• Quantity: Weight-matched set of 4
• Application: Recommended for competition use

Fits Honda and Acura H23 and F22 series engines. These Eagle Standard H-Beam connecting rods are engineered for competition use, providing the structural integrity required for high-horsepower and high-RPM builds.

Each rod is manufactured from a two-piece 4340 steel forging. To ensure maximum fatigue life and durability, the rods undergo a comprehensive machining process followed by shot-peening to relieve surface stresses. Eagle maintains exceptionally tight tolerances on sizing, delivering a weight-matched set that simplifies engine balancing. These rods come equipped with ARP 2000 bolts, significantly increasing clamping force and reliability over factory hardware.

• Manufacturer Part Number: CRS5571H3D
• Material: Forged 4340 Steel
• Design: Standard H-Beam
• Finish: Fully machined and shot-peened
• Hardware: ARP 2000 bolts included
• Quantity: Weight-matched set of 4 rods

Fits select 1995-2002 Chrysler, Dodge, and Plymouth models equipped with the 2.0L SOHC/DOHC engine, including the Mitsubishi-designed 420A.

Engineered for high-performance and competition applications, these Eagle H-beam connecting rods provide the structural integrity necessary for increased power levels. Each rod is manufactured from a two-piece 4340 steel forging to ensure superior grain flow and durability. The surfaces are fully machined and shot-peened to reduce stress risers and significantly improve fatigue life under load.

To ensure consistent performance and engine balance, Eagle delivers these rods as a weight-matched set. They come equipped with ARP 2000 rod bolts, offering enhanced clamping force for high-RPM or forced induction environments. Every rod is held to exacting tolerances to ensure a precise fit during engine assembly.

• Manufacturer Part Number: CRS5472N3D
• Material: Forged 4340 Steel
• Design: H-Beam with two-piece forging
• Hardware: Includes ARP 2000 rod bolts
• Finish: Fully machined and shot-peened
• Quantity: Weight-matched set of 4
• Compatibility: Designed for competition-use engines

Fits select 1994-2001 Acura Integra (GS-R, Type R) and Honda CR-V (EX, LX, SE) with B18C1/5 engines.

Eagle H-Beam connecting rods provide the structural integrity required for high-performance and competition engines. Each rod is manufactured from a two-piece 4340 steel forging, then fully machined and shot-peened to enhance fatigue life and reduce stress risers. Sizing is held to exacting tolerances, and the sets are weight-matched to ensure balanced rotating assembly performance.

To support high-boost and high-RPM applications, these rods come equipped with premium ARP 2000 bolts, providing superior clamping force and power-handling capability over standard hardware. This set is a proven choice for B-series enthusiasts looking to replace worn OE components with race-grade internals.

• Material: Forged 4340 Chromoly Steel
• Design: H-Beam
• Hardware: Includes ARP 2000 rod bolts
• Finish: Fully machined and shot-peened
• Quantity: Weight-matched set of 4
• Manufacturer Part Number: CRS5430A3D

Fits select 1988-2001 Honda Civic, CRX, Civic del Sol, and Acura Integra (D16 / ZC engines).

Eagle Specialty Products H-Beam connecting rods are engineered for the rigors of competition use. Forged from two-piece 4340 steel, these rods undergo an intensive manufacturing process to ensure maximum structural integrity. Each rod is fully machined and shot-peened to increase fatigue life and relieve surface stress, providing the durability needed for high-horsepower builds.

To ensure rotating balance and smooth operation, these rods are sold as a weight-matched set of four. They come equipped with high-tensile ARP 2000 bolts to handle increased cylinder pressures and high-RPM loads. Sizing is held to exact tolerances for a precise fit during engine assembly.

• Material: Forged 4340 Steel
• Design: H-Beam
• Surface Finish: Fully machined and shot-peened
• Hardware: Genuine ARP 2000 rod bolts
• Weight Management: Sold as a weight-matched set
• MPN: CRS5394H3D

Fits 1990-2001 Acura Integra GS, GS-R, LS, RS, Special Edition, and Type R.

Eagle Specialty Products H-Beam connecting rods provide the structural integrity and precision required for high-performance and competition-grade engine builds. These rods are manufactured from two-piece 4340 steel forgings to ensure superior grain flow and long-term durability. Each rod is fully machined and shot-peened to relieve surface stress and enhance fatigue resistance under high-load conditions.

Sizing is maintained to exact tolerances, and each set is weight-matched to ensure rotating assembly balance. For increased power-handling and reliability, these rods come equipped with high-tensile ARP 2000 fasteners, making them a direct upgrade for engines seeing increased cylinder pressures or high RPM use.

• Material: Forged 4340 Steel
• Design: H-Beam
• Center-to-Center Length: 5.394 in
• Fasteners: ARP 2000 Bolts
• Quantity: Set of 4
• Manufacturer Part Number: CRS5394A3D

Fits 1989-2002 Nissan 240SX, Sentra SE-R, NX, 200SX, and Infiniti G20 models.

Eagle H-Beam connecting rods (MPN: CRS5365N3D) are engineered for the high-stress demands of competition SR20 builds. Forged from two-piece 4340 steel, these rods undergo a rigorous machining and shot-peening process to increase fatigue life and ensure dimensional accuracy. Each set is weight-matched to provide balanced rotation and smooth engine operation under extreme loads.

These rods come equipped with high-tensile ARP 2000 rod bolts, providing the superior clamping force required to handle increased boost and high-RPM environments. Whether you are building a high-performance street engine or a dedicated track machine, these Eagle rods provide the reliable bottom-end foundation needed for significant power gains.

• Material: Forged 4340 Steel
• Design: H-Beam construction for maximum strength
• Hardware: High-tensile ARP 2000 rod bolts included
• Surface Finish: Fully machined and shot-peened to reduce stress risers
• Quantity: Precision weight-matched set of 4
• Manufacturer Part Number: CRS5365N3D

Fits 1994-2000 Honda Civic Si and Civic del Sol VTEC equipped with the B16 engine. These Eagle H-beam connecting rods provide the structural integrity required for high-RPM competition use and forced induction builds.

Forged from two-piece 4340 steel, these rods undergo a rigorous manufacturing process including full machining and shot-peening to improve fatigue life and reduce stress risers. Each set is weight-matched and held to exacting tolerances to ensure balanced engine operation. For maximum clamping force and reliability under high cylinder pressures, this set comes equipped with ARP 2000 series bolts.

• Manufacturer Part Number: CRS5290H3D
• Material: Forged 4340 Steel
• Design: H-Beam with two-piece forging
• Fasteners: High-strength ARP 2000 bolts
• Finish: Fully machined and shot-peened
• Quantity: Set of 4 weight-matched rods
• Application: Recommended for competition use

Fits Nissan CA18DET engines.

Engineered for high-horsepower competition applications, Eagle Specialty Products H-Beam connecting rods provide the structural integrity required for forced induction and high-RPM builds. Each rod is manufactured from a two-piece forged 4340 chromoly steel casting to ensure superior grain flow and strength. The rods undergo a rigorous machining process and are shot-peened to reduce surface stress and improve fatigue life.

This set comes weight-matched to ensure rotating assembly balance and includes high-tensile ARP 2000 bolts for maximum clamping force and reliability under extreme loads. Sizing is maintained to exacting tolerances for a precise fit on the crankshaft journals.

• Material: Forged 4340 Chromoly Steel
• Design: H-Beam for increased rigidity and weight savings
• Hardware: ARP 2000 series bolts included
• Finish: Fully machined and shot-peened
• Quantity: Matched set of 4
• Manufacturer Part Number: CRS5236N3D

Fits Subaru EJ18 and EJ20 engines.

Eagle Specialty Products H-beam connecting rods are engineered for high-performance and competition use. These rods are manufactured from a two-piece 4340 forged steel process, providing superior strength over factory components. This specific set features a longer-than-stock rod length, making it a critical component for custom engine builds requiring specific rod-to-stroke ratios or deck height adjustments.

Every rod undergoes a rigorous manufacturing process, including full machining and shot-peening to reduce surface stress and improve fatigue life. To ensure the stability of your rotating assembly, these rods are sold as a weight-matched set. They come equipped with high-tensile ARP 2000 bolts to handle increased cylinder pressures and higher RPM ranges.

• Material: 4340 forged steel
• Design: H-Beam (Longer Than Stock)
• Hardware: ARP 2000 bolts included
• Finish: Shot-peened and fully machined to exact tolerances
• Quantity: Set of 4 weight-matched rods
• Manufacturer Part Number: CRS5232S3D

Fits select 1990-2012 Subaru Baja, Forester, Impreza, Legacy, and Outback models equipped with EJ20 or EJ25 engines.

Eagle Specialty Products H-Beam connecting rods provide the structural integrity required for high-performance and competition Subaru builds. Manufactured from a two-piece 4340 forged steel process, these rods offer a superior grain structure designed to withstand the increased cylinder pressures of forced induction and high-RPM applications. Each rod is fully machined and shot-peened to improve fatigue life and eliminate stress risers.

This set of four rods is weight-matched and held to exacting tolerances to ensure balanced engine rotation. To maximize clamping force and prevent rod cap movement under heavy loads, the set comes equipped with high-strength ARP 2000 fasteners.

• Forged 4340 steel H-Beam construction for maximum durability
• Includes premium ARP 2000 rod bolts
• Fully machined and shot-peened surface finish
• Weight-matched set for consistent engine balance
• Engineered specifically for Subaru EJ20 and EJ25 platforms
• Manufacturer Part Number: CRS5137S3D

Fits 2012-2023 Subaru BRZ, Scion FR-S, and Toyota 86.

Eagle Specialty Products H-beam connecting rods (MPN: CRS5089S3D) provide the structural integrity and precision required for high-performance and competition-level engines. Each rod is manufactured from two-piece forged 4340 steel and undergoes a rigorous machining and shot-peening process to ensure exact sizing tolerances and improved fatigue life. The weight-matched design ensures balanced rotational mass across all four cylinders.

Designed to handle significantly higher power levels than OE components, these rods come equipped with high-tensile ARP 2000 bolts. This set is recommended for high-revving naturally aspirated builds or forced induction applications where factory rod strength is the primary failure point.

• Material: Forged 4340 Steel
• Rod Design: H-Beam
• Fasteners: High-strength ARP 2000 bolts included
• Finish: Fully machined and shot-peened surface
• Configuration: Set of 4 weight-matched rods
• Manufacturer Part Number: CRS5089S3D

Fits 1980-1982 Toyota Corolla (2TC/3TC). This set of four Eagle H-Beam connecting rods is designed for competition use and high-horsepower applications where factory rods fail. These rods are manufactured from a two-piece 4340 forged steel process, ensuring superior grain structure and durability. Each rod is fully machined and shot-peened to relieve stress and increase fatigue life.

To ensure precise engine balance and reliability, sizing is held to exacting tolerances and the rods are delivered as a weight-matched set. For maximum clamping force and cap stability, these rods come equipped with high-strength ARP 2000 bolts.

• Forged 4340 chromoly steel construction for extreme strength
• Two-piece forging process with fully machined surfaces
• Shot-peened finish to improve fatigue resistance
• Equipped with high-strength ARP 2000 rod bolts
• Weight-matched for balanced engine operation
• Manufacturer Part Number: CRS4850TA3D

Strengthen your rotating assembly with Carrillo Pro-H connecting rods, specifically engineered for Audi and Volkswagen 2.0 TSI engines. These rods are designed to provide superior durability and fatigue resistance under the high cylinder pressures common in modified forced-induction builds. The Pro-H beam profile optimizes the strength-to-weight ratio, ensuring the bottom end can reliably handle increased power levels and high-RPM operation.

This set comes equipped with premium 3/8" CARR bolts. These high-tensile fasteners are preferred for professional racing and high-performance applications where standard hardware may fail. Each rod is manufactured to exacting tolerances to ensure consistent balance and fitment within the engine block.

• Manufacturer Part Number: SCR9714-4
• Engine Application: Audi/Volkswagen 2.0 TSI
• Rod Style: Pro-H Beam
• Fastener Size: 3/8" CARR Bolts
• Quantity: Matched Set of 4

Fits select BMW THP150/THP175 and Peugeot EP6CDT/EP5DTS engines.

These Carrillo Pro-H beam connecting rods (MPN: SCR7069-4) are engineered to handle the extreme cylinder pressures and RPMs found in high-performance builds. Utilizing a proprietary steel forging, these rods offer an exceptional strength-to-weight ratio, ensuring reliable reciprocating mass for your engine assembly. The Pro-H design provides maximum rigidity, making these an essential upgrade for tuned THP and EP6 series engines.

Each rod features high-strength 5/16 CARR bolts, specifically designed to resist fatigue and stretching under heavy loads. These fasteners provide the clamping force necessary to maintain bearing integrity during high-speed operation.

• Manufacturer Part Number: SCR7069-4
• Series: Pro-H Beam
• Hardware: 5/16 CARR Bolts
• Compatible Engines: BMW THP150, THP175; Peugeot EP6CDT, EP5DTS
• Material: Proprietary Forged Steel

Fits 2000-2011 Toyota Celica, Corolla, and Matrix, Lotus Elise and Exige, and Pontiac Vibe (2ZZ-GE).

The Carrillo Pro-H series connecting rods are engineered for high-performance builds that demand exceptional strength-to-weight ratios and high-RPM stability. Specifically designed for the 2ZZ-GE engine, these rods utilize a precision-engineered H-beam architecture to withstand the increased cylinder pressures of high-compression or forced-induction applications. These rods come equipped with 3/8-inch WMC bolts, which are high-tensile fasteners designed to provide superior clamping force and fatigue resistance compared to standard hardware.

• Manufacturer Part Number: SCR5517-4
• Rod Series: Pro-H
• Bolt Diameter: 3/8"
• Bolt Material: WMC
• Engine Fitment: 1.8L 2ZZ-GE
• Design: H-Beam