Fits select 1983-2014 Ford F-150, Mustang, Ranger, Bronco, and Explorer models equipped with a Ford 8.8 rear axle.

Protect your drivetrain and manage gear oil temperatures with this aFe rear differential cover. Engineered from heavy-duty cast aluminum, this cover features both internal and external fins to maximize heat dissipation from the oil to the ambient air. It increases fluid capacity by approximately 0.5 quarts over the stock unit, providing better thermal stability and lubrication during heavy towing or high-performance driving.

• Enhanced Cooling: Integrated cooling fins and cast aluminum construction work together to lower operating temperatures.
• Magnetic Protection: Dual Neodymium magnetic drain and deep-reach fill plugs capture loose metallic debris to protect your gears.
• Simple Inspection: A pre-installed large oil level sight glass and a calibration plug set to the factory level allow for quick oil checks and prevent overfilling.
• Durable Finish: Black powder-coated finish with machined fins for superior corrosion resistance and a custom appearance.
• Installation Ready: Includes RTV silicone for a secure seal on the factory mounting points of the Ford 8.8 axle.
• Manufacturer Part Number: 46-71410B

Fits select 1983-2014 Ford Bronco, Explorer, F-150, Mustang, and Ranger models equipped with the Ford 8.8 rear axle.

The aFe POWER rear differential cover is engineered to provide superior cooling and protection for your Ford 8.8 axle. Constructed from durable cast aluminum, this cover features internal and external fins to dissipate heat efficiently from the gear oil to the ambient air. It adds approximately 0.5 quart of oil capacity over the factory unit, supporting better lubrication and performance over long-distance towing or high-stress driving.

Maintenance is simplified with a neodymium magnetic drain plug that captures metallic debris to protect gears, along with a calibration plug set to the factory oil level to prevent overfilling. The cover is finished in raw aluminum with machined fins for a rugged, technical look. RTV silicone is included for a complete installation.

• Manufacturer Part Number: 46-71410A
• Fits Ford 8.8-inch rear axles
• Cast aluminum construction with cooling fins
• Increases fluid capacity by approximately 0.5 quart over stock
• Neodymium magnetic drain plug for superior particle capture
• Calibration plug for accurate fluid level maintenance
• Includes RTV silicone gasket maker

Fits select 2017-2025 Ford F-150, 2019-2023 Ranger, and 2021-2025 Bronco models equipped with 10R60 or 10R80 automatic transmissions.

The aFe POWER Pro Series transmission pan provides superior protection and cooling for your Ford truck or SUV. Engineered for high-stress applications like towing and off-roading, this pan is constructed from durable die-cast aluminum. It features reinforced ribs both internally and externally to increase housing strength and optimize heat dissipation from the transmission fluid to the ambient air.

This Pro Series pan adds approximately 2.3 quarts of fluid capacity over the factory unit, aiding in temperature control during long-duration performance. The integrated Neodymium magnetic drain plug captures metallic particles to keep your gear train clean, while the black powder-coated finish with machined fins ensures a professional, corrosion-resistant look. The kit includes all necessary hardware for a straightforward installation.

• Manufacturer Part Number: 46-71330B
• Fits Ford 10R60 and 10R80 automatic transmissions
• Additional 2.3-quart fluid capacity over stock
• Constructed from die-cast A380 aluminum for maximum strength
• Internal and external fins for improved thermal management
• High-strength Neodymium magnetic drain plug included
• Direct bolt-on fitment with provided installation hardware

Fits select 1997-2023 Ford F-150 models equipped with a 9.75-inch rear axle, including XL, XLT, Lariat, Raptor, and Tremor trims.

aFe POWER Pro Series rear differential covers provide essential protection and cooling for your truck's drivetrain. This cover is engineered from durable die-cast aluminum with reinforced ribs to increase housing rigidity and strength. To manage temperatures during heavy towing or high-performance driving, built-in external fins transfer heat from the gear oil to the ambient air. The high-clearance design ensures full compatibility with vehicles equipped with a factory rear track bar.

Maintenance is simplified via a large oil level sight glass and a 1/8-inch NPT calibration plug set to the factory fluid level, preventing overfilling. For maximum gear protection, this system includes a deep-reach magnetic dipstick and a large neodymium magnetic drain plug to capture and remove metallic debris from the gear oil.

• Fits Ford 9.75-inch rear axles
• Constructed from heavy-duty die-cast aluminum
• Black powder coat finish with machined fins for heat dissipation
• Integrated oil level sight glass for quick fluid checks
• Deep-reach magnetic dipstick and neodymium magnetic drain plug
• 1/8-inch NPT calibration plug eliminates overfilling
• Manufacturer Part Number: 46-71320B

Fits select 2021-2026 Ram 1500 TRX and RHO models (V8-6.2L).

Protect your drivetrain and improve cooling performance with the aFe POWER PRO Series Rear Differential Cover. Engineered for the high-performance Ram 1500 TRX and RHO, this cover is constructed from durable cast aluminum to provide superior protection for your rear gears. The black powder-coated finish with machined fins isn't just for looks—the external fins significantly increase surface area to dissipate heat more efficiently than the factory stamped-steel cover, keeping your gear oil temperatures stable during spirited driving or towing.

• Part Number: 46-71280B
• Material: Cast aluminum construction for high strength and heat dissipation
• Finish: Black powder-coated with CNC-machined external cooling fins
• Fitment: Direct bolt-on installation for select 2021-2026 Ram 1500 models
• Designed to improve fluid capacity and structural rigidity

Fits 2021-2026 Ram 1500 TRX and RHO models (V8-6.2L).

Reinforce your drivetrain and optimize thermal management with the aFe Street Series Rear Differential Cover. Specifically designed for the heavy-duty requirements of the Ram 1500 TRX and RHO, this cover replaces the factory unit to provide increased durability and a custom look. The cast aluminum construction offers a significant strength upgrade over stamped steel components, protecting your internal gears from impact and debris.

The Street Series design features a raw finish with CNC-machined external fins. These fins are more than an aesthetic choice; they increase the surface area of the housing to better dissipate heat, keeping your gear lubricant cooler during high-load scenarios. This direct-fit upgrade uses factory mounting points for a straightforward installation.

• Durable cast aluminum construction provides superior housing rigidity
• External CNC-machined fins for improved heat dissipation
• Raw finish with machined accents for a rugged, industrial look
• Designed specifically for the Ram 1500 rear axle
• Manufacturer Part Number: 46-71280A

Fits select 2020-2023 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD equipped with AAM 11.5 or 12.0 rear axles.

Engineered for the heavy-duty demands of towing and hauling, the aFe Power Pro Series rear differential cover (MPN 46-71260B) provides superior cooling and protection for your drivetrain. This high-capacity cover increases oil volume over the stock unit for improved thermal stability. Integrated internal and external fins maximize heat dissipation, transferring thermal energy from the gear oil to the ambient air. For maintenance ease and long-term reliability, the cover features a large oil level sight glass for instant inspections and a calibration plug set to the factory oil level to prevent overfilling.

• Fits AAM 11.5/12.0 rear axles
• Constructed from durable cast aluminum with a black powder coat finish and machined fins
• Dual Neodymium magnetic plugs capture loose metallic particles to protect gears
• Includes a deep-reach magnetic fill plug and magnetic drain plug
• Internal and external fins for maximum cooling efficiency
• Built-in oil level sight glass and calibration plug
• Manufacturer Part Number: 46-71260B

Fits select 2006-2022 Audi A3, Q3, S3, TT, TTS and Volkswagen Golf, GTI, Jetta, Tiguan (1.8L / 2.0L / 1.8T).

The aFe POWER Street Series engine oil pan is engineered to improve thermal management and engine protection for Audi and Volkswagen vehicles without an oil level sensor. Constructed from durable cast aluminum, this pan increases oil capacity by approximately 1 quart over the factory unit, providing a larger reserve for cooling and lubrication. Internal and external fins dissipate heat efficiently to the ambient air, maintaining stable oil temperatures during demanding driving conditions.

• Manufactured from high-strength cast aluminum for superior durability and heat transfer.
• Increases oil capacity by approximately 1 quart over stock for improved engine cooling.
• Internal and external cooling fins maximize surface area for heat dissipation.
• Black powder-coated finish with machined fins for corrosion resistance and a custom look.
• Includes a high-strength Neodymium magnetic drain plug to capture ferrous debris.
• Supplied with RTV silicone for a secure, leak-free installation.
• Designed specifically for applications without a factory oil level sensor.
• Manufacturer Part Number: 46-71240B

Fits select 2006-2022 Audi A3, Q3, S3, TT, and TTS Quattro, as well as Volkswagen Golf, GTI, Jetta, and Tiguan (1.8L / 1.8T / 2.0L).

Upgrade your engine's thermal management and lubrication safety with the aFe Power POWER Street Series engine oil pan. This pan is engineered from durable cast aluminum, which provides significantly better heat dissipation than factory stamped-steel or plastic pans. To further enhance cooling, it features both internal and external fins that transfer heat from the oil to the ambient air. With an increased capacity of approximately 1 quart over stock, this pan ensures a larger oil reserve for consistent performance during spirited driving or extended intervals.

The POWER Street Series pan is finished in a rugged black powder coat with machined fins for a custom look that resists corrosion. It is designed for a hassle-free installation, incorporating the factory oil level sensor mount and including a high-strength neodymium magnetic drain plug to capture metallic debris before it can circulate through your engine.

• Increased Capacity: Adds approximately 1 quart of oil over the factory pan.
• Premium Materials: Constructed from heavy-duty cast aluminum with a black powder-coated finish.
• Magnetic Protection: Includes a neodymium magnetic drain plug for maximum engine debris capture.
• Direct Integration: Replaces OE pan and maintains the factory oil level sensor functionality.
• Complete Kit: Includes RTV silicone for a leak-free seal.
• Manufacturer Part Number: 46-71210B

Fits 2015-2023 Ford F-150 models equipped with Super 8.8 rear axles.

Replace your factory stamped steel differential cover with the aFe POWER Pro Series rear differential cover for superior protection and cooling. Engineered for the 2015-2023 Ford F-150, this cover is constructed from durable cast aluminum and features a black finish. The design incorporates both internal and external fins to maximize heat transfer from the gear oil to the ambient air, maintaining lower operating temperatures during heavy towing or performance driving. This cover also provides increased oil capacity over the stock unit for improved thermal stability.

• Construction: Heavy-duty cast aluminum with cooling fins.
• Oil Management: Increased oil capacity for better performance over longer durations.
• Magnetic Plugs: Includes a Neodymium magnetic drain plug and a deep-reach magnetic fill plug to capture ferrous debris and protect gear sets.
• Calibration Plug: Set to the factory oil level to prevent overfilling during service.
• Sight Glass: Built-in oil level sight glass for fast, easy visual inspections.
• Fitment: Specifically designed for Super 8.8 rear axles.
• Emissions: This product does not require a CARB EO#.
• Part Number: 46-71180B

Fits select 2014-2023 Cadillac Escalade, Chevrolet Silverado 1500, Chevrolet Suburban, GMC Sierra 1500, and GMC Yukon/XL models equipped with an AAM 9.5 or 9.76 12-bolt rear axle.

Protect your drivetrain with the aFe Power Pro Series rear differential cover. Engineered to replace factory stamped-steel covers, this unit is constructed from durable A380-T6 cast aluminum with integrated reinforcing ribs for maximum structural rigidity. The design features both internal and external fins to facilitate heat dissipation, keeping gear oil temperatures lower during towing or heavy-duty use. This cover includes a magnetic drain plug and a deep-reach magnetic fill plug to capture ferrous debris, along with a built-in oil level sight glass for fast, accurate fluid inspections without removing the fill plug.

• Fits AAM 9.5/9.76 - 12-bolt rear axles
• Constructed from heavy-duty cast aluminum with a black powder-coated finish and machined fins
• Internal and external fins maximize heat transfer and cooling
• Includes oil level sight glass and calibration plug to set factory fill level and prevent overfilling
• Magnetic drain and fill plugs capture loose metal particles to protect gears and bearings
• Complete with all necessary installation hardware
• Manufacturer Part Number: 46-71120B

Fits 1999-2023 Ford F-250/F-350 Super Duty and 2000-2005 Ford Excursion models equipped with Dana 60 front axles.

The aFe POWER Pro Series differential cover provides superior thermal management and protection for your front axle. Engineered from durable cast aluminum with integrated internal and external fins, this cover maximizes heat dissipation to keep gear oil temperatures stable during heavy towing or off-road use. The increased fluid capacity improves performance over longer durations compared to the stock stamped-steel cover.

• Enhanced Cooling: Built-in external and internal fins transfer heat from the oil to the ambient air for maximum cooling efficiency.
• Particle Protection: Includes a magnetic drain plug and a deep-reach magnetic fill plug to capture loose metal particles, protecting your ring and pinion gears.
• Precision Maintenance: An integrated oil level sight glass allows for fast visual inspections, while the calibration plug is set to the factory fill level to prevent overfilling.
• Heavy-Duty Construction: Manufactured from high-strength cast aluminum with a black finish and CNC-machined fins for rugged durability and a premium look.
• Manufacturer Part Number: 46-71100B

Fits select 1999-2023 Ford F-250/F-350 Super Duty and 2000-2005 Excursion models equipped with a Dana 60 front axle.

The aFe POWER Street Series front differential cover provides enhanced thermal management and increased oil capacity for your heavy-duty Ford truck. Cast from durable aluminum, this cover features both internal and external machined fins to maximize heat transfer from the gear oil to the ambient air, helping to maintain lubricant integrity during long hauls or off-road use. The increased oil capacity further ensures more stable operating temperatures over extended durations.

Designed for straightforward maintenance and maximum protection, this cover includes a magnetic drain plug to capture loose metallic particles before they can wear down your gears or bearings. A built-in calibration plug is set specifically to the factory oil level to prevent overfilling, ensuring your Dana 60 stays properly lubricated without the risk of seal-damaging pressure. This unit replaces the thin factory stamped-steel cover with a rugged, heat-dissipating housing.

• Increased Oil Capacity: Enhances fluid volume for more consistent performance and cooling.
• Thermal Management: Built-in internal and external fins dissipate heat efficiently from the axle.
• Magnetic Drain Plug: High-strength magnet captures ferrous particles to protect internal components.
• Precision Calibration: Pre-set calibration plug ensures accurate factory fill levels every time.
• Rugged Construction: Manufactured from durable cast aluminum with a raw finish and machined fins.
• MPN: 46-71100A

Fits 2001-2019 Chevrolet Silverado and GMC Sierra 2500/2500 HD/3500/3500 HD trucks (V8-6.6L / V8-8.1L / 6.0L).

The aFe Power Pro Series rear differential cover (MPN: 46-71060B) provides superior protection and cooling for heavy-duty GM axles. Constructed from durable cast aluminum with integrated internal and external cooling fins, this cover efficiently dissipates heat from the gear oil to the ambient air. The increased oil capacity helps maintain lower operating temperatures over long-haul or high-load conditions, extending the life of your differential components.

This Pro Series cover is designed for easy maintenance and maximum debris protection. It features a magnetic drain plug and a deep-reach magnetic fill plug to trap metallic particles before they cause wear. A pre-installed oil level sight glass allows for instant fluid checks, while the calibration plug is specifically set to the factory fill level to prevent overfilling.

• Durable cast aluminum construction with reinforced ribs for maximum strength
• Black powder-coated finish with machined cooling fins
• Increased oil capacity over factory housing for improved thermal management
• Magnetic drain and fill plugs capture abrasive ferrous particles
• Built-in sight glass for rapid oil level inspection
• Includes all necessary installation hardware

Fits 2018-2023 Jeep Wrangler (JL) models equipped with the V6-3.6L engine and Dana M186 front axle.

Protect your drivetrain with the aFe Power Pro Series front differential cover. Constructed from heavy-duty cast aluminum with reinforced ribs, this cover is built for maximum strength and structural integrity on the trail. The design features integrated internal and external fins that transfer heat from the gear oil to the ambient air, ensuring your differential stays cool during long hauls or crawling.

Maintenance is simplified with a built-in oil level sight glass for quick visual inspections. The system also includes magnetic drain and fill plugs to capture metallic particles, protecting your gears from premature wear. A 1/8-inch NPT calibration plug is set to the factory fluid level to eliminate the risk of overfilling. With an approximate 2-quart capacity, this cover offers superior lubrication over the stock unit.

• Material: Durable cast aluminum with a black finish
• Cooling: Internal and external heat-dissipating fins
• Capacity: Approximately 2-quart lube capacity
• Hardware: Includes all necessary installation hardware
• Safety: Magnetic plugs and 1/8-inch NPT calibration plug
• Inspection: Built-in oil level sight glass
• MPN: 46-71010B

Fits select 2018-2025 Jeep Wrangler (JL) models with the V6-3.6L engine and Dana M220 rear axle.

The aFe Power Pro Series rear differential cover provides heavy-duty protection and enhanced cooling for your Dana M220 axle. Constructed from durable cast aluminum with reinforced ribs, this cover features a black powdercoated finish with machined fins to maximize heat dissipation from the gear oil to the ambient air. Designed for the enthusiast who demands more than the factory stamped steel cover can offer, it includes essential features for easy maintenance and long-term drivetrain reliability.

This kit includes a magnetic drain and fill plug to capture metallic particles, preventing premature wear on your gears and bearings. An integrated oil level sight glass allows for quick visual inspections without removing the fill plug, while the 1/8" NPT calibration plug is set to the factory fluid level to eliminate the risk of accidental overfilling during service.

• Material: Durable cast aluminum with reinforced ribs for maximum strength
• Heat Management: Internal and external fins dissipate heat efficiently to protect fluid integrity
• Sight Glass: Built-in oil level sight glass for fast visual inspections
• Magnetic Plugs: Magnetic drain and fill plugs capture loose metal particles from the gear oil
• Calibration Plug: 1/8" NPT plug prevents overfilling by matching factory fluid levels
• Finish: Black powdercoated with machined fins for styling and corrosion resistance
• Hardware: Includes all necessary hardware for a direct-fit installation
• Manufacturer Part Number: 46-71000B

Fits select 2013-2023 Ram 2500 and 3500 trucks (L6-6.7L).

The aFe Power Pro Series front differential cover brings performance-grade protection and cooling to your truck's drivetrain. Engineered specifically for AAM 9.25-12 bolt front axles, this cover is constructed from durable cast aluminum with reinforced ribs for maximum structural integrity. It features an increased oil capacity over the factory unit, which combined with internal and external cooling fins, helps dissipate heat and maintain lower lubricant temperatures during heavy towing or high-load conditions.

Maintenance is simplified via a pre-installed oil level sight glass for quick inspections and a calibration plug set to the factory fill level to prevent overfilling. To protect your gears, the system utilizes dual neodymium magnetic plugs—including a deep-reach fill plug and a drain plug—to capture and hold loose metallic particles. The cover is finished in a resilient wrinkle-black powder coating with machined fins for a premium look.

• Fits AAM 9.25-12 bolt front axles
• Constructed from heavy-duty reinforced cast aluminum
• Increased oil capacity for better thermal management
• Internal and external fins for maximum heat dissipation
• Integrated oil level sight glass and factory-set calibration plug
• Dual neodymium magnetic plugs for gear protection
• Durable wrinkle-black powder-coated finish with machined fins
• Includes all required installation hardware
• Manufacturer Part Number: 46-70402

Fits select 2003-2018 Dodge/Ram 2500 and 3500 trucks equipped with AAM 11.5/11.8 14-bolt rear axles.

Protect your heavy-duty drivetrain with the aFe Power Pro Series rear differential cover. Engineered for high-performance protection, this cover is constructed from durable cast aluminum with reinforced ribs for maximum structural integrity. The increased oil capacity over stock ensures better lubrication and temperature stability over long durations, while integrated internal and external fins maximize heat transfer to the ambient air.

This Pro Series system simplifies maintenance with a pre-installed oil level sight glass for quick inspections and a calibration plug set to the factory oil level to prevent overfilling. For maximum gear protection, it features dual neodymium magnetic plugs—including a deep-reach fill plug—to capture loose metallic particles before they cause wear. The wrinkle-black powder-coated finish with machined fins provides a rugged, custom look that stands up to the elements.

• Manufacturer Part Number: 46-70392
• Fits AAM 11.5/11.8 14-bolt rear axles
• Constructed from durable cast aluminum with reinforced ribs
• Dual neodymium magnetic plugs (drain and deep-reach fill)
• Large oil level sight glass for easy inspection
• Calibration plug set to factory oil level
• Increased oil capacity for improved cooling
• Includes all necessary installation hardware

Fits 2017-2023 Ford F-350 Super Duty models (6.7L) equipped with Dana M300-14 bolt axles.

The aFe Power rear differential cover brings performance engineering to your truck's drivetrain, providing superior protection and increased fluid capacity for the Dana M300-14 bolt axle. Constructed from durable A356-T6 cast aluminum, this cover features integrated reinforcing ribs for maximum structural integrity. The design increases gear oil capacity to approximately 5 quarts—a significant upgrade over the 4-quart factory cover—helping to maintain lower operating temperatures during heavy towing or hauling.

Equipped with both internal and external cooling fins, this cover maximizes surface area for efficient heat dissipation. For maintenance and monitoring, it includes a large oil level sight glass and a 1/8-inch NPT calibration plug set to the factory fluid level to prevent overfilling. Protection is further enhanced by a magnetic drain plug and a deep-reach magnetic fill plug that capture loose metallic particles before they can damage your bearings or gears.

• Manufacturer Part Number: 46-70382
• Material: A356-T6 Cast Aluminum
• Finish: Black Powder-Coating with Machined Fins
• Capacity: 5 Quarts (approximate)
• Axle Fitment: Dana M300-14 Bolt (Dually)
• Includes magnetic drain/fill plugs and sight glass
• Includes all necessary mounting hardware for installation

Fits 2017-2023 Ford F-250 and F-350 Super Duty models (V8-6.7L) equipped with the Dana M275-14 rear axle.

Protect your heavy-duty drivetrain and improve thermal management with the aFe Power Pro Series Rear Differential Cover (MPN: 46-70352). This cover increases fluid capacity to 5 quarts—one full quart over the factory 4-quart system—offering improved cooling and lubricant longevity during heavy towing or hauling. Engineered from die-cast A356 aluminum, it features external cooling fins to transfer heat from the gear oil to the ambient air.

Maintenance is simplified via an integrated large oil level sight glass and a calibration plug set to the factory fluid level to prevent overfilling. For maximum component protection, both the fill and drain ports are equipped with magnetic plugs to capture and remove metallic debris from the gear oil. The assembly is finished in a durable wrinkle black powder coat with machined fins for a rugged, custom look.

• 5-quart lube capacity (increases volume by 1 quart over stock)
• Constructed from A356 die-cast aluminum with structural reinforcing ribs
• Wrinkle black powder-coat finish with CNC-machined external cooling fins
• Integrated large oil level sight glass for easy fluid inspection
• Magnetic drain and fill plugs trap ferrous particles to protect internal gears
• Includes calibration plug to ensure proper fluid levels during service

Fits 2011-2026 Ford F-250/F-350 Super Duty (V8-6.7L Powerstroke).

The aFe Power Pro Series engine oil pan brings advanced engineering to the Ford 6.7L Powerstroke engine. Designed for superior thermal management, this pan is constructed from high-strength A356 die-cast aluminum and features integrated internal and external fins to dissipate heat into the passing air. To ensure long-term engine health, the pan includes a magnetic drain plug that captures metallic debris before it can circulate through your oiling system.

Beyond cooling, this pan adds an additional 2-quart capacity over the stock unit, providing a larger oil reserve for demanding towing or heavy-duty use. The pan is finished in a durable wrinkle black powdercoat with machined fins for a custom look, and it features a fully machined groove designed to accept a factory O-ring for a reliable, leak-free seal. All necessary hardware is included for a direct, bolt-on installation.

• Constructed of durable A356 die-cast aluminum with reinforcing ribs for maximum strength
• Adds an additional 2 quarts of oil capacity over the factory pan
• Internal and external fins maximize heat transfer and cooling
• Magnetic drain plug captures loose metal particles to protect engine internals
• Fully machined groove accepts O-ring for a secure, leak-free seal
• Wrinkle black powdercoat finish with machined fins for a premium appearance
• Manufacturer Part Number: 46-70322

Fits 2014-2019 Ram 1500 and 1500 Classic models equipped with the 3.0L EcoDiesel engine.

The aFe POWER Street Series deep oil pan brings performance engineering and enhanced protection to your truck’s engine. This pan is constructed from durable die-cast A356 aluminum with reinforced ribs for maximum strength. The raw finish with machined accents provides a rugged look, while built-in internal and external fins efficiently transfer heat from the oil to the ambient air to optimize cooling.

• Adds 2 quarts of additional fluid capacity over the factory stock pan
• Die-cast A356 aluminum construction with reinforced ribs for maximum durability
• Integrated internal and external fins for superior heat dissipation
• Includes a magnetic drain plug to capture metallic debris and protect engine internals
• Pre-tapped 1/8-inch NPT port for easy installation of an oil temperature sensor
• Manufacturer Part Number: 46-70280

Fits 2011-2021 Ford F-250 and F-350 Super Duty (V8-6.7L).

The aFe Power Pro Series deep transmission pan provides professional-grade protection and thermal management for your Ford 6R140 transmission. This pan increases fluid capacity by 3 quarts over the factory unit, offering a larger volume of fluid to help stabilize operating temperatures during heavy-duty towing and high-stress driving. Constructed from durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder-coated finish, it delivers both structural rigidity and enhanced cooling.

Designed with integrated internal and external fins, this pan maximizes heat transfer from the fluid to the ambient air. Maintenance is streamlined via a large Neodymium magnetic drain plug that captures metal particles and a 1/8-inch NPT port for easy installation of a temperature sensor. This unit is a direct bolt-on replacement that reuses the factory gasket and filter while requiring no modifications to the factory dipstick.

• Increased Capacity: Adds 3 quarts of fluid over the factory stock line
• Premium Construction: Die-cast A380 aluminum with reinforced ribs and wrinkle black finish
• Thermal Management: Internal and external cooling fins for maximum heat dissipation
• Maintenance Ready: Neodymium magnetic drain plug and 1/8-inch NPT sensor port
• Installation: Direct bolt-on; reuses factory gasket and filter with no dipstick mods
• MPN: 46-70182

Fits select 2009-2020 Ford F-150 trucks equipped with the 6R80 transmission.

Protect your transmission and improve thermal management with the aFe Power Pro Series deep transmission pan. Designed for severe-duty use, this pan increases fluid capacity by 7 quarts over the stock unit, providing a larger heat sink for hard-working trucks. The built-in internal and external cooling fins maximize heat dissipation from the fluid to the ambient air, keeping your transmission operating within its optimal temperature range during towing or high-load conditions.

Construction is centered on durability and ease of maintenance. This pan is manufactured from die-cast A380 aluminum with reinforced ribs for maximum structural integrity. It features a wrinkle black powder-coated finish with machined fins for a rugged look and corrosion resistance. Installation is straightforward as it reuses the factory gasket and magnet while maintaining compatibility with the stock filter.

• Increased Capacity: Adds 7 quarts of additional fluid over the factory pan.
• Thermal Control: Internal and external fins transfer heat more efficiently than stamped steel pans.
• NPT Port: Includes a 1/8" NPT port for easy installation of an aftermarket temperature sensor.
• Magnetic Drain Plug: Captures loose metallic debris to protect internal transmission components.
• Durable Build: Reinforced die-cast A380 aluminum construction with a wrinkle black finish.
• Fitment: Reuses factory gasket and is compatible with the stock filter.
• Manufacturer Part Number: 46-70172

Fits select 1994-2010 Ford F-250, F-250 Super Duty, F-350, and F-350 Super Duty (6.4L).

The aFe POWER Pro Series deep transmission pan brings performance-oriented protection to your Ford truck. Engineered for superior thermal management, this pan increases fluid capacity by 7-1/2 quarts over the factory system, providing a larger buffer to keep operating temperatures stable under load. It is constructed from heavy-duty die-cast A380 aluminum with reinforced ribs for maximum structural integrity.

To ensure peak performance, this pan features internal and external cooling fins that efficiently transfer heat from the fluid to the ambient air. Maintenance is simplified with a magnetic drain plug that captures loose ferrous debris before it can circulate through the transmission. A pre-tapped 1/8" NPT port is included for easy installation of an aftermarket temperature sensor.

• Increased Capacity: Adds 7.5 additional quarts over stock factory line.
• Construction: Durable die-cast A380 aluminum with a wrinkle black powder-coated finish.
• Cooling Efficiency: Built-in internal and external fins for maximum heat dissipation.
• Integrated Port: 1/8" NPT port for temperature sensors.
• Debris Protection: Large magnetic drain plug for catching metal particles.
• Manufacturer Part Number: 46-70122-1