The Yukon Gear CK F10.25 Carrier Installation Kit is a precise, cost-effective solution for differential upgrades and carrier replacements. This kit is specifically designed for technicians and DIY builders installing a positraction limited slip differential, mechanical locker, or air-operated locker in Ford 10.25-inch and 10.5-inch rear ends.

Fits select 1985-2010 Ford E-250, E-350, Excursion, F-150, F-250, and F-350 models. This kit provides the essential hardware needed to set carrier preload and backlash when the existing ring and pinion gear set is being reused.

• Includes high-quality carrier bearings and races for reliable housing support.
• Features a "Super" carrier shim kit for fine-tuned differential adjustment.
• Streamlined kit contents for carrier-only swaps to reduce unnecessary costs.
• Designed for Ford 10.25" and 10.5" ring gear diameters.
• Manufacturer Part Number: CK F10.25

Fits select 1953-2002 Chevrolet, GMC, Dodge, Ford, and Jeep vehicles (5.9L).

The Yukon Gear Carrier Installation Kit (CK D44) is an efficient, cost-effective solution for technicians and DIYers performing carrier-level differential service. This kit is specifically designed for use when upgrading to a positraction limited-slip differential, mechanical locker, or air-operated locker in a Dana Spicer 44 housing, where a full master overhaul isn't required.

This kit provides the essential hardware needed to set carrier preload and establish proper backlash. By utilizing high-quality bearings and a precise shim set, you can ensure the differential carrier is properly seated and aligned within the housing for optimal gear mesh and longevity.

• Fits Dana Spicer 44 axle housings
• Ideal for locker and limited-slip differential (LSD) upgrades
• Includes premium carrier bearings and races
• Includes comprehensive carrier shim kit for precise adjustment
• Manufacturer Part Number: CK D44

Designed for select BMW applications, the XClutch XMS-230-BM02-2G-XC service pack provides a comprehensive solution for refreshing a worn 9-inch twin-disc organic clutch. This kit is engineered specifically to restore the clamping force and driveability of your existing XClutch performance upgrade, ensuring the diaphragm design and pivot points maintain their intended pedal feel for high-performance street use.

This service pack overhauls the critical wear components of the multi-disc assembly. It includes the friction discs and intermediate plate, along with the pressure plate casting to ensure a fresh mating surface. Because these kits utilize specialized friction materials, the flywheel must be machined to precise rebuild tolerances prior to installation to ensure proper engagement and longevity.

• Fits XClutch 9-inch Twin Solid Organic Multi-Disc kits for BMW
• Includes twin organic friction discs and intermediate plate
• Pressure plate main casting or assembly (application specific)
• New release bearing and pilot bearing/bush included where required
• Alignment tool provided for precise spline synchronization
• Recommended for performance street applications
• Manufacturer Part Number: XMS-230-BM02-2G-XC

Fits select 2015-2024 Volkswagen Golf R, GTI, and Jetta GLI (2.0L).

The XClutch Stage 2R Extra HD Sprung Ceramic Clutch Kit is a high-performance, single-disc race upgrade designed for vehicles requiring significantly increased torque capacity and thermal management. Engineered for track use, this kit utilizes advanced ceramic friction technology mated to an extra heavy-duty diaphragm-style pressure plate to maintain positive pedal feel and clamping force under extreme conditions.

With over 30 years of development and testing, XClutch designs their Stage 2R series with optimized pivot points to ensure consistent engagement. This kit is a comprehensive replacement solution, including a flywheel and hydraulic release bearing to replace the factory components.

• Manufacturer Part Number: XKVW24698-1R
• Clutch Type: Single Disc, Sprung Ceramic
• Pressure Plate Design: Extra Heavy Duty Diaphragm
• Usage Recommendation: Track Only
• Included Components: Friction Disc, Pressure Plate, Flywheel, Hydraulic Release Bearing, Alignment Tool, and Pilot Bearing.

The XClutch Stage 1 Sprung Organic Clutch Kit is engineered for road-going 2015-2024 Volkswagen Golf R, GTI, and Jetta GLI models (2.0L) that require increased torque capacity without sacrificing daily driveability. This kit provides a significant performance upgrade by utilizing a heavy-duty diaphragm-type pressure plate and a sprung organic friction disc, offering smooth engagement and excellent vibration dampening for street use.

Every XClutch kit is developed using advanced R&D and testing facilities to ensure optimal pedal feel and clamping force. This single-disc system is an ideal solution for modified street vehicles that need reliable power transfer while maintaining factory-like operation.

• Manufacturer Part Number: XKVW24698-1A
• Clutch Type: Single Disc, Sprung Organic
• Pressure Plate: Heavy Duty Diaphragm Type
• Intended Use: Recommended for Street Performance
• Included Components: Friction Disc, Pressure Plate, Hydraulic Release Bearing, Flywheel - Pilot, Aligning Tool, and Technical Service Bulletins

This Part Fits:

Fits 2023-2025 Toyota GR Corolla models (1.6L) including Circuit Edition, Core, Morizo Edition, and Premium Plus.

The XClutch Stage 2R Extra HD performance upgrade is engineered for high-performance track applications where increased torque holding and superior heat capacity are critical. This single-disc kit features a sprung ceramic friction material, designed to provide the aggressive bite required for racing while protecting the drivetrain from shock through its sprung hub. The extra heavy-duty diaphragm-style pressure plate is carefully analyzed to ensure a positive pedal feel and significantly increased clamping force over the factory setup.

Built in one of the world's most advanced clutch R&D facilities, this kit leverages over 30 years of engineering experience to deliver reliable performance for dedicated track use. Each component is designed to bolt directly to the factory mounting points, replacing the worn OE assembly with a track-ready solution.

• Manufacturer Part Number: XKTY24646-1R
• Clutch Type: Single Disc, Sprung Ceramic
• Pressure Plate Style: Extra Heavy Duty Diaphragm
• Application: Recommended for Track/Competition Use
• Kit Includes: Friction Disc, Pressure Plate, Hydraulic Release Bearing, Flywheel - Pilot, Aligning Tool, and Technical Service Bulletins

Fits 2023-2025 Toyota GR Corolla (1.6L) including Circuit Edition, Core, Morizo Edition, and Premium Plus submodels.

The XClutch Stage 1 performance upgrade is engineered to provide a significant increase in torque holding capacity while maintaining the smooth engagement required for daily street use. Utilizing a heavy-duty diaphragm-type pressure plate and a solid organic friction disc, this kit offers an ideal balance between increased clamping force and positive pedal feel. The lightweight solid disc construction reduces inertia on the input shaft, enabling faster shift times and improved drivetrain response.

Developed in XClutch's advanced R&D facilities, this kit is specifically designed for high-performance road-going vehicles. It replaces the factory components with high-tolerance parts built to withstand the demands of the 1.6L turbocharged powertrain without sacrificing driveability.

• Manufacturer Part Number: XKTY24447-1G
• Clutch Type: Single Disc, Solid Organic
• Pressure Plate: Heavy Duty, Diaphragm Type
• Recommended Use: Street Performance
• Included Hardware: Pressure Plate, Friction Disc, Hydraulic Release Bearing - Pilot, and Aligning Tool

Fits 2018-2025 Subaru WRX Base, Limited, and Premium models (2.0L).

The XClutch Stage 1 Sprung Organic Clutch Kit (XKSU24588-1A) is engineered to provide a substantial increase in torque capacity and clamping force while maintaining the smooth engagement required for daily street driving. This single-disc upgrade features a heavy-duty diaphragm-type pressure plate and a sprung organic friction disc designed to reduce drivetrain vibration and provide excellent dampening for performance-oriented road vehicles.

Utilizing advanced pressure plate geometry and high-quality friction materials, this kit provides a positive pedal feel and reliable performance. Every XClutch upgrade is developed using over 30 years of clutch engineering experience and rigorous in-house vehicle testing to ensure precise fitment and durability.

• Product Series: Stage 1
• Disc Type: Single Sprung Organic
• Pressure Plate: Heavy-Duty Diaphragm Type
• Application: Recommended for Performance Street Use
• Included Components: Pressure plate, friction disc, release bearing, pilot, and alignment tool
• Manufacturer Part Number: XKSU24588-1A

Fits select 2004-2021 Subaru Impreza WRX STI, WRX STI, and Legacy GT spec.B (2.5L).

The XClutch Stage 2 Cushioned Ceramic Clutch Kit is engineered for high-performance street applications that demand increased torque capacity and superior heat resistance without sacrificing drivability. Unlike standard ceramic discs, this kit features a cushioned friction disc and a sprung hub to provide improved pedal modulation and dampening, making it an ideal choice for high-powered daily drivers and street-tuned vehicles.

Each kit is built around a heavy-duty diaphragm-type pressure plate designed for increased clamping force and a positive pedal feel. Tested in XClutch’s advanced R&D facilities, these components ensure reliable engagement under the thermal stresses of aggressive driving. This comprehensive kit includes all necessary hardware for a complete installation, including the release and pilot bearings.

• Manufacturer Part Number: XKSU24001-1C
• Clutch Type: Single Disc, Cushioned Ceramic
• Hub Style: Sprung Hub
• Pressure Plate: Heavy Duty Diaphragm
• Included Hardware: Pressure Plate, Friction Disc, Release Bearing, Pilot Bearing, and Alignment Tool
• Recommended Use: Performance Street

Fits select 2004-2021 Subaru WRX STI and Legacy GT spec.B (2.5L).

Engineered for high-performance track applications, the XClutch Stage 2 Sprung Ceramic Clutch Kit (XKSU24001-1B) provides the increased torque holding and thermal capacity required for modified 2.5L Subaru engines. This kit replaces the factory assembly with a heavy-duty diaphragm-type pressure plate and a ceramic friction disc, designed to withstand the extreme heat cycles of racing while maintaining a positive, consistent pedal feel.

The sprung hub design utilizes a dampening mechanism to absorb peak shock loads, protecting your drivetrain components during aggressive shifts and high-RPM launches. Built using advanced R&D and vehicle-specific testing, this Stage 2 kit offers an ideal balance of durability and engagement for vehicles that have outgrown the limits of organic friction materials.

• Manufacturer Part Number: XKSU24001-1B
• Friction Material: Ceramic (Stage 2)
• Disc Style: Sprung Hub Single Disc
• Pressure Plate Type: Heavy-Duty Diaphragm
• Intended Use: Recommended for Track Use
• Kit Includes: Pressure Plate, Friction Disc, Release Bearing, Pilot Bearing, and Alignment Tool

Fits select 2004-2021 Subaru Impreza WRX STI, Legacy GT spec.B, and WRX STI (2.5L).

The XClutch Stage 1 Extra HD (Heavy Duty) performance clutch kit is engineered for drivers who require increased torque capacity for higher horsepower street applications without sacrificing daily driveability. This single-disc kit utilizes a premium sprung organic friction material that offers the ideal balance of smooth engagement and heat resistance. By optimizing the diaphragm design and pivot points, XClutch provides a significant increase in clamping force while maintaining a positive, predictable pedal feel.

• Series: Stage 1 Extra HD (1AX)
• Disc Type: Single-disc, sprung organic friction material
• Pressure Plate: Extra heavy-duty diaphragm style
• Application: Recommended for high-performance street use
• MPN: XKSU24001-1AX

Kit Includes: High-performance friction disc, heavy-duty pressure plate, release bearing, pilot bearing, alignment tool, and technical service bulletins.

Fits 2004-2021 Subaru Impreza WRX STI, WRX STI, and Legacy GT spec.B (2.5L).

The XClutch Stage 1 Sprung Organic Clutch Kit is engineered to provide a substantial increase in torque holding capacity while maintaining the smooth engagement required for daily street use. Utilizing a heavy-duty diaphragm-type pressure plate and a premium sprung organic friction disc, this kit optimizes the balance between performance and driveability. Each component is designed with a specific focus on pivot point and diaphragm geometry to ensure a positive pedal feel and increased clamping force.

Developed in XClutch's world-class R&D and testing facility, this kit serves as a direct performance upgrade over the factory assembly. It is ideal for street-driven vehicles that require more durable drivetrain components to handle increased engine output.

• Manufacturer Part Number: XKSU24001-1A
• Clutch Type: Single Disc, Sprung Organic
• Pressure Plate Design: Heavy Duty, Diaphragm Type
• Recommended Use: High-Performance Street
• Fitment: Select 2.5L Turbo Subaru AWD drivetrain

Kit Includes: High-clamp pressure plate, sprung organic friction disc, release bearing, pilot bearing, alignment tool, and technical service bulletins where applicable.

Fits select 2013-2026 Subaru BRZ, Scion FR-S, Toyota 86, and Toyota GR86 models (2.0L).

Engineered for high-horsepower street-driven vehicles, the XClutch 9-inch twin-disc upgrade provides a precise balance between driveability and extreme performance. By utilizing a twin-disc configuration with sprung organic friction material, this kit offers significantly higher torque capacity than a single-disc setup while maintaining excellent pedal feel. The sprung disc design is specifically chosen to reduce shock loading on the transmission compared to rigid race-style discs, protecting your drivetrain during aggressive shifts.

Every component is analyzed for optimal pivot points and diaphragm design, ensuring increased clamping force without sacrificing the positive engagement required for daily use. This comprehensive kit (MPN XKSU23540-2A) includes a lightweight flywheel and all necessary hardware for a complete installation.

• Clutch Type: Twin Disc, Sprung Organic
• Pressure Plate: Heavy-Duty Diaphragm Type
• Recommended Use: High-Power Street
• Kit Includes: Friction Discs, Pressure Plate, Release Bearing, Pilot Bearing, Flywheel, and Aligning Tool
• Manufacturer Part Number: XKSU23540-2A

Fits select 2004-2021 Subaru Impreza WRX, WRX STI, and Legacy GT spec.B (2.5L).

The XClutch 9-inch twin disc organic upgrade is engineered for high-horsepower street-driven vehicles that require a balance between increased torque capacity and smooth driveability. This kit utilizes a twin solid organic friction disc configuration to optimize pedal feel and thermal stability. Each component, including the heavy-duty diaphragm-type pressure plate, is analyzed for precise pivot points to ensure positive engagement and increased clamping force.

• Series: 9-inch Twin Solid Organic
• Clutch Type: Twin Disc
• Friction Material: Solid Organic
• Pressure Plate: Heavy-Duty Diaphragm
• MPN: XKSU23531-2G
• Usage: Recommended for performance street use

Kit Includes: Friction discs, pressure plate, release bearing, flywheel, pilot bearing/bushing, and alignment tool.

Fits select 2004-2021 Subaru Impreza WRX, Impreza WRX STI, Legacy GT spec.B, and WRX STI (2.5L).

The XClutch twin disc ceramic clutch kit is engineered for high-horsepower motorsport applications that demand extreme heat capacity and significantly increased clamping force. By utilizing dual 9-inch sprung ceramic friction discs, this system manages the thermal loads of track use while protecting the drivetrain. The sprung hub design effectively reduces shock loading on transmission components during aggressive shifting and high-torque engagement.

Every component is precision-engineered, featuring a lightweight alloy hat and a performance pressure plate with a carefully analyzed pivot point and diaphragm design to maintain a positive pedal feel. This comprehensive upgrade replaces the OE clutch and flywheel with a system built for the rigors of competitive track environments.

• Manufacturer Part Number: XKSU23531-2B
• Clutch Diameter: 9 inch (230mm)
• Clutch Type: Twin Disc, Sprung Ceramic
• Material: Lightweight Alloy Hat
• Recommended for Track Use

Kit Includes: Friction Discs, Pressure Plate, Release Bearing, Flywheel - Pilot, Aligning Tool, and Technical Service Bulletins (as required).

Fits select 2004-2021 Subaru Impreza WRX, Impreza WRX STI, WRX STI, and Legacy GT spec.B (2.5L).

XClutch performance upgrades are engineered to deliver the ultimate balance between high-power handling and street drivability. This 10.5-inch twin-disc kit utilizes sprung organic friction material, specifically designed to handle increased horsepower while reducing shock loading on the transmission compared to rigid disc alternatives. The heavy-duty diaphragm pressure plate has been meticulously analyzed to ensure a positive pedal feel and significant clamping force increases over the factory assembly.

Built in one of the world's most advanced clutch R&D facilities, this kit (MPN: XKSU23531-2A) includes everything required for a complete installation, including a matched flywheel and necessary pilot and release bearings.

• Part Number: XKSU23531-2A
• Clutch Type: Twin Disc, Sprung Organic
• Diameter: 10.5in
• Pressure Plate: Heavy Duty Diaphragm
• Application: Recommended for High-Power Street Use
• Included Components: Pressure Plate, Friction Discs, Flywheel, Release Bearing, Pilot Bearing/Bush, and Alignment Tool

Fits select 2005-2017 Subaru WRX, Impreza, Forester, Legacy, Outback, Baja, and Saab 9-2X (2.0L).

The XClutch Stage 2 performance upgrade is engineered for drivers who require increased torque capacity and thermal resistance without sacrificing street driveability. This kit utilizes a cushioned ceramic friction disc, which provides the high-heat performance of ceramic material while maintaining smoother engagement and better pedal modulation compared to standard unsprung paddle-style discs. The heavy-duty pressure plate is specifically designed with an optimized pivot point and diaphragm to increase clamping force while providing a positive, consistent pedal feel.

Built in one of the world's most advanced clutch R&D facilities, this Stage 2 kit is the ideal solution for performance-oriented street vehicles and mild track use. Every component is manufactured to strict engineering tolerances to ensure long-term reliability under high-load scenarios.

• Manufacturer Part Number: XKSU23015-1C
• Clutch Type: Single Disc, Cushioned Ceramic
• Pressure Plate: Heavy Duty Diaphragm Type
• Hub Design: Sprung Hub for vibration dampening
• Application: Performance Street Use

Kit Includes: High-performance pressure plate, cushioned ceramic friction disc, release bearing, pilot bearing, and alignment tool.

Fits select 2005-2017 Subaru WRX, Forester, Legacy, Outback, Baja, and Saab 9-2X (2.0L).

The XClutch Stage 1 Performance Upgrade is engineered for road-going vehicles that require a substantial increase in torque holding capacity without sacrificing daily driveability. This single-disc kit utilizes a high-quality sprung organic friction material that provides smooth engagement while maintaining the durability needed for spirited street use. By analyzing the pivot point and diaphragm geometry, XClutch has optimized the pressure plate for a positive pedal feel and increased clamping force.

• Manufacturer Part Number: XKSU23015-1A
• Clutch Type: Stage 1 Sprung Organic Single Disc
• Pressure Plate: Heavy-duty diaphragm type for increased clamping force
• Recommended Use: Street performance
• Kit Includes: Friction disc, pressure plate, release bearing, pilot bearing, and alignment tool
• Design: Engineered for optimal balance between driveability and performance

Each XClutch kit is developed at their advanced R&D and testing facility, drawing on over 30 years of clutch engineering experience to ensure a direct-fit replacement that meets the demands of modern performance applications.

Fits select 2010-2026 Subaru BRZ, Forester, Legacy, and Outback, Toyota 86 and GR86, and Scion FR-S (2.0L).

The XClutch Stage 1 performance clutch kit is engineered to deliver a significant increase in torque capacity while maintaining the smooth engagement and driveability required for street use. By utilizing a high-grade sprung organic friction disc and a heavy-duty diaphragm-type pressure plate, this kit optimizes clamping force without sacrificing pedal feel. Every kit is developed using advanced R&D and vehicle testing to ensure it meets the demands of performance-oriented daily driving.

• Manufacturer Part Number: XKSU23012-1A
• Clutch Type: Single Disc, Sprung Organic
• Pressure Plate Type: Heavy-Duty Diaphragm
• Application: Recommended for street performance use
• Components Included: Pressure plate, friction disc, release bearing, pilot bearing, and alignment tool

Fits select 1991-2006 Saab 9-2X and Subaru Baja, Forester, Impreza, and Legacy models (2.5L).

The XClutch Stage 1 Sprung Organic Clutch Kit is engineered for road-going performance vehicles, providing a substantial increase in torque holding capacity without sacrificing daily driveability. This kit features a heavy-duty pressure plate designed with an optimized pivot point and diaphragm to ensure positive pedal feel and increased clamping force. The sprung organic friction disc allows for smooth engagement and reduced drivetrain vibration, making it the ideal upgrade for street-driven Subaru and Saab applications requiring higher performance than the factory unit.

• Manufacturer Part Number: XKSU23006-1A
• Kit Type: Single Disc, Stage 1
• Friction Material: Sprung Organic
• Pressure Plate: Heavy Duty Diaphragm Type
• Recommended Use: Performance Street

Kit Includes: Heavy-duty pressure plate, sprung organic friction disc, release bearing, pilot bearing/bushing (where required), and alignment tool.

Fits 2006-2013 Mazda 3 and 6 Mazdaspeed (2.3L).

The XClutch Stage 1 Sprung Organic Clutch Kit is engineered for drivers who need increased torque holding capacity for performance street use without the harsh engagement of a ceramic race clutch. By utilizing a heavy-duty diaphragm-type pressure plate and a high-quality sprung organic friction disc, this kit provides a significant upgrade in clamping force while maintaining excellent pedal feel and vibration dampening for daily drivability. Every XClutch kit is developed using their advanced R&D facilities to ensure the pivot point and diaphragm geometry deliver positive engagement and reliable performance.

• Manufacturer Part Number: XKMZ24530-1A
• Clutch Type: Single Disc, Sprung Organic
• Pressure Plate: Heavy Duty Diaphragm Type
• Recommended Use: Performance Street
• Kit Includes: Friction Disc, Pressure Plate, Release Bearing, Pilot Bearing/Bush, and Alignment Tool

Fits 2006-2013 Mazda 3 and 6 Mazdaspeed (2.3L Turbo).

The XClutch Performance Upgrade kit is engineered for high-horsepower street vehicles, providing an optimal balance between torque capacity and drivability. This twin-disc system utilizes sprung organic friction discs to significantly reduce shock loading on the transmission compared to rigid discs, making it a preferred choice for high-power daily drivers and street-performance builds.

XClutch utilizes a specialized lightweight alloy hat and a precision-engineered pressure plate to increase clamping force while maintaining a positive pedal feel. Each component is developed in a world-class R&D facility to ensure it meets the tolerances required for both performance and longevity.

• Manufacturer Part Number: XKMZ23530-2A
• Clutch Type: Twin Disc, Sprung Organic
• Disc Diameter: 10.5in
• Construction: Lightweight alloy hat for reduced rotational inertia
• Application: Recommended for high-power street use
• Included Components: Pressure plate, friction discs, flywheel, release bearing, pilot bearing/bushing, and alignment tool

Fits 1990-1993 Mazda Miata (1.6L).

The XClutch Stage 1 Sprung Organic Clutch Kit (XKMZ20002-1A) is engineered for road-going enthusiasts who require increased torque capacity without sacrificing the smooth engagement required for daily driving. By utilizing a high-performance heavy-duty diaphragm-type pressure plate and a premium sprung organic friction disc, this kit provides a significant upgrade in clamping force and durability over the factory assembly.

Designed and tested in one of the world's most advanced clutch R&D facilities, this kit ensures a positive pedal feel and reliable performance. It is the ideal solution for 1.6L NA Miatas that see spirited street use or light performance modifications.

• Part Type: Stage 1 Sprung Organic Clutch Kit
• Disc Design: Single disc, sprung organic for smooth engagement
• Pressure Plate: Heavy-duty diaphragm type for increased clamping force
• Recommended Use: Performance street
• Manufacturer Part Number: XKMZ20002-1A
• Included Hardware: Friction disc, pressure plate, release bearing, pilot bearing, and alignment tool

Vehicle Fitment

Fits 2003-2006 Mitsubishi Lancer Evolution (2.0L).

The XClutch Twin Sprung Organic Clutch Kit is engineered specifically for high-horsepower, street-driven vehicles that require a balance between increased torque capacity and smooth driveability. Utilizing a 10.5-inch twin-disc configuration, this kit features sprung organic friction discs that reduce shock loading on the transmission compared to rigid alternatives, preserving drivetrain longevity while handling significant performance upgrades. XClutch optimizes the pivot point and diaphragm design to ensure a positive pedal feel and increased clamping force.

• Manufacturer Part Number: XKMI23522-2A
• Clutch Type: Twin Disc, Sprung Organic
• Pressure Plate: Heavy-duty diaphragm type
• Included Hardware: Friction discs, pressure plate, release bearing, flywheel, pilot bearing, and alignment tool
• Recommended Use: High-power street applications

This comprehensive kit includes a performance flywheel and all necessary components for a complete installation, ensuring the system is balanced and ready for high-performance use.

Fits 2017-2025 Honda Civic Type R (2.0L).

The XClutch Stage 1 Sprung Organic Clutch Kit is engineered for high-performance street use, offering a significant increase in torque capacity while maintaining the smooth engagement and driveability required for daily operation. This kit features a heavy-duty diaphragm-type pressure plate with optimized pivot points to provide increased clamping force and a positive, predictable pedal feel. The sprung organic friction disc provides excellent dampening to reduce drivetrain vibrations and noise.

Developed in a world-class R&D facility with over 30 years of clutch expertise, XClutch components are built to handle the rigors of spirited driving without the harsh engagement found in dedicated race setups. This complete kit (MPN XKHN24537-1A) includes everything needed for a comprehensive installation.

• Single disc, sprung organic friction material
• Heavy-duty diaphragm-type pressure plate
• Increased torque holding capacity over stock
• Retains OEM-like driveability and engagement
• Includes: Friction Disc, Pressure Plate, Release Bearing, Pilot Bearing/Bushing (as required), and Alignment Tool

Fits 2017-2025 Honda Civic Type R (2.0L).

The XClutch 9-inch twin disc performance upgrade is engineered for high-horsepower street vehicles requiring a precise balance between drivability and extreme torque capacity. This kit utilizes a twin-disc solid organic friction material configuration to optimize engagement feel and thermal stability. By incorporating a lightweight alloy hat and a specifically analyzed diaphragm design, XClutch ensures increased clamping force and positive pedal feedback for spirited driving conditions.

• Disc Diameter: 9.0 inches (230mm)
• Disc Type: Twin Solid Organic
• Clamping Force: Increased over OE for performance street applications
• Hub/Hat Material: Lightweight Alloy
• MPN: XKHN23537-2G

Kit Includes: Friction discs, pressure plate, release bearing, flywheel, pilot bearing, and alignment tool.

Fits 2017-2025 Honda Civic Type R (2.0L).

The XClutch 9-inch twin-disc clutch kit is engineered for high-horsepower motorsport applications requiring extreme heat management and high torque capacity. This kit features solid ceramic friction discs and a lightweight alloy hat, providing a significant upgrade for track-focused vehicles that demand a positive pedal feel and increased clamping force.

Utilizing advanced pressure plate geometry and high-friction materials, XClutch components are developed through rigorous in-house testing to ensure they withstand the rigors of competitive racing. This twin-disc setup is specifically recommended for dedicated track use where durability under thermal stress is critical.

• Manufacturer Part Number: XKHN23537-2E
• Disc Diameter: 9 inches (230mm)
• Disc Type: Twin Solid Ceramic
• Cover Material: Lightweight Alloy Hat
• Application: Recommended for Track Use

Kit Includes: Friction Discs, Pressure Plate, Release Bearing, Flywheel, Pilot Bearing, and Alignment Tool.

Fits select 2002-2011 Acura RSX and Honda Civic (2.0L).

The XClutch Stage 2 Cushioned Ceramic Clutch Kit (XKHN22022-1C) is engineered for performance street applications that demand increased torque holding and higher heat capacity. By utilizing a cushioned ceramic friction disc, this kit bridges the gap between track-ready performance and daily driveability, offering superior pedal modulation compared to standard unsprung ceramic discs.

This heavy-duty upgrade features a precision-engineered diaphragm-type pressure plate, designed to provide a positive pedal feel while significantly increasing clamping force. Every Stage 2 kit is validated through rigorous testing to ensure reliable engagement under the stress of high-performance driving.

• Manufacturer Part Number: XKHN22022-1C
• Clutch Design: Single Disc, Cushioned Ceramic
• Pressure Plate: Heavy Duty Diaphragm Type
• Hub Style: Sprung Hub for dampening
• Recommended Use: Performance Street

Kit Includes: High-performance pressure plate, cushioned ceramic friction disc, release bearing, alignment tool, and technical service bulletins.

Fits 2010-2014 Hyundai Genesis Coupe (2.0T / 2.0L).

The XClutch Stage 2 Cushioned Ceramic Clutch Kit (XKHD25630-1C) is engineered to provide a significant increase in torque holding and heat capacity for performance street applications. By utilizing ceramic friction technology on a cushioned, sprung-hub disc, XClutch offers an ideal balance between the aggressive bite of ceramic and the pedal modulation required for street driveability. The heavy-duty diaphragm-type pressure plate is carefully tuned to increase clamping force while maintaining a positive pedal feel.

Developed with over 30 years of engineering experience and rigorous in-house testing, this Stage 2 kit is designed for drivers who need a durable solution for tuned vehicles without moving to a full-race unsprung disc.

• Disc Type: Single Disc, Cushioned Ceramic
• Hub Design: Sprung Hub for improved dampening
• Pressure Plate: Heavy-Duty Diaphragm Type
• Application: Performance Street Use
• MPN: XKHD25630-1C

Kit Includes: Ceramic Friction Disc, Heavy-Duty Pressure Plate, Hydraulic Release Bearing, Flywheel - Pilot, and Aligning Tool.

Fits select 2013-2024 Hyundai Elantra, Elantra GT, Veloster, and Kia Forte (1.6L).

The XClutch Stage 1 Solid Organic Clutch Kit is engineered for road-going vehicles requiring a substantial increase in torque capacity without sacrificing street driveability. By utilizing a heavy-duty diaphragm-type pressure plate and a premium solid organic friction disc, this kit provides a positive pedal feel and increased clamping force. The solid disc construction is specifically designed to reduce inertia on the input shaft, which helps facilitate faster shift times and improved throttle response during spirited driving.

Built with over 30 years of experience in performance clutch development, each XClutch kit undergoes rigorous testing to ensure it meets the demands of high-performance street applications. This kit replaces the factory components with performance-grade materials that manage heat more effectively than standard OE equivalents.

• Manufacturer Part Number: XKHD24012-1G
• Clutch Type: Single Disc, Solid Organic
• Pressure Plate: Heavy-Duty Diaphragm Type
• Recommended Use: Street Performance
• Included Components: Friction Disc, Pressure Plate, Pilot Bearing/Bush, Alignment Tool, and Technical Service Bulletins