Skunk2 is proud to introduce its 66mm Alpha Series Throttle Body for Hondas B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2's 66mm Alpha Series Throttle Body is designed to be used with Skunk2's Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price. Skunk2's Alpha Series Throttle Bodies are precision die-cast from high-quality materials and include features previously offered only in our Pro Series line, like countersunk, stainless steel mounting bolts, solid brass throttle plates, fully machined bores, and idle adjustment screws for fine tuning. All Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesnt just provide more flow but retains smooth drivability and OEM throttle characteristics. A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2's Alpha Series Throttle Bodies for B-series engines feature a large, 66mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones. Skunk2's 66mm Alpha Series Throttle Body offers Skunk2 performance, industry-leading customer service, and a limited-lifetime warranty policy, all at a price comparable to lesser budget-minded throttle bodies. Unlike the budget-minded throttle bodies, though, only Skunk2 Alpha Series Throttle Bodies ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.

• Sealed Ball Bearings For Smooth Operation
• Precision Machined Brass Throttle Plate
• Idle Adjustment Screws For Fine Tuning
• Fine Shot-Blasted Surface Finish
• Compatible w/OEM Throttle Cable
• Gasket And Hardware Included
• Precision Die-Cast Aluminum
• 66mm Honda B/D/F/H Engines

This Part Fits:

Skunk2 is proud to introduce its 90mm Pro Series Throttle Body. Skunk2's Pro Series Throttle Bodies are designed to be used with Skunk2 Ultra Series Intake Manifolds for bolt-on horsepower and torque gains by optimizing engine airflow. Skunk2 throttle bodies undergo an extensive design and testing process to produce a unit that doesn't just provide more flow, but retains smooth drivability and OEM throttle characteristics. Skunk2 Pro-Series Throttle Bodies are designed using the latest CAE (Computer Aided Engineering) tools to produce a unit that exceeds industry standards. Each Pro-Series Throttle Body is CNC-machined from forged, billet 6061-T6 aluminum and hard anodized for durability. Additionally, Skunk2's unique design relocates the MAP sensor underneath and eliminates the OEM coolant outlets for cooler operation and a cleaner appearance. A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2's new Pro Series Throttle Bodies feature a 90mm bore, and utilize a Mustang 5.0 bolt pattern. Skunk2 90mm Pro-Series Throttle Bodies use Honda MAP and TPS sensors. The perfect match for your Ultra Race Intake Manifold.

• Durable Corrosion Resistant Hard Anodized Finish
• CNC-Forged 6061-T6 Billet Aluminum Construction
• Eliminates OEM Water Lines For Cooler Operation
• Sealed Bearings For Smooth Operation
• Compatible w/OEM Throttle Cable
• Ford Mustang 5.0 Bolt Pattern
• Uses Honda MAP And TPS Sensor
• Integrated Skunk2 Badge
• Large 90mm Bore

Skunk2 is proud to introduce its 68mm Pro Series Throttle Body for Hondas B-series engines (also compatible with D-, F-, and H-series) in its exclusive, Black Series finish. Skunk2's 68mm Pro Series Throttle Body is designed to be used with Skunk2's Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow. Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesnt just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2's signature finish. Additionally, Skunk2's unique design relocates the MAP sensor underneath and eliminates the OEM water passages for cooler operation and a cleaner appearance. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and a genuine, integrated Skunk2 badge. All necessary hardware and a new throttle body gasket are included for trouble-free installation. A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2's Pro Series Throttle Bodies for B-series engines feature a large, 68mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

• For Use w/Pro Series Intake Manifold For Increased Airflow
• Black Billet Aluminum

This Part Fits:

Skunk2 is proud to introduce its 68mm Pro Series Throttle Body for Hondas B-series engines (also compatible with D-, F-, and H-series) in its exclusive, hard anodized finish. Skunk2's 68mm Pro Series Throttle Body is designed to be used with Skunk2's Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow. Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesnt just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2's signature finish. Additionally, Skunk2's unique design relocates the MAP sensor underneath and eliminates the OEM water passages for cooler operation and a cleaner appearance. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and a genuine, integrated Skunk2 badge. All necessary hardware and a new throttle body gasket are included for trouble-free installation. A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2's Pro Series Throttle Bodies for B-series engines feature a large, 68mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

• For Use w/Pro Series Intake Manifold For Increased Airflow
• Billet Aluminum

This Part Fits:

Skunk2's industry-leading Alpha Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Similar to Skunk2's already popular Pro Series Titanium Retainers, Alpha Titanium Retainers feature radius-cut edges for additional rocker arm clearance and reduced weight, strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and even further weight reduction. Alpha Titanium Retainers are manufactured using the latest 3D CAD (Computer Aided Design) and FEA (Finite Element Analysis) to ensure that each is optimized for strength as well as for reduced weight. Skunk2 engineers then test and prove their designs on the engine dyno as well as the race track. Once approved for manufacturing, only medical-grade titanium that's been ultrasonically inspected and certified is used. Following CNC machining, each retainer is then individually inspected to ensure proper hole diameter, taper, and that each are free from machining defects to ensure proper installed valve spring heights and pressures. Finally, each retainer is serialized for your protection, including valuable information, like material batch specifics as well as production and inspection dates. Skunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support. Skunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains.

• Exceptional Performance/Reliability/Quality
• Manufactured W/ 3D Cad And Fea

This Part Fits:

Skunk2's industry-leading Titanium Retainers for Honda's K-series engines are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Unlink other retainers, Skunk2 Titanium Retainers feature radius-cut edges for additional rocker arm clearance and reduced weight, strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and even further weight reduction. All Skunk2 Titanium Retainers are manufactured using the latest 3D CAD (Computer Aided Design) and FEA (Finite Element Analysis) to ensure that each is optimized for strength as well as for reduced weight. Skunk2 engineers then test and prove their designs on the engine dyno as well as the race track. Once approved for manufacturing, only medical-grade titanium that's been ultrasonically inspected and certified is used. Following CNC machining, each retainer is then individually inspected to ensure proper hole diameter, taper, and that each are free from machining defects to ensure proper installed valve spring heights and pressures. Finally, each Titanium Retainer is serialized for your protection, including valuable information, like material batch specifics as well as production and inspection dates. Skunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support.

• Titanium Constructed; 42% Lighter Than OEM Steel Retainers
• Pair w/Tuner Series Or Pro Series Valve Springs
• Set of 16

This Part Fits:

Skunk2's revised Nissan/Infiniti VQ35 Composite Intake Plenum Spacer V2.0 is dyno proven and road tested to outperform all other intake manifold plenum spacers. Skunk2's Intake Plenum Spacer V2.0 features a number of improvements, including a thicker design that increases plenum volume, lowers intake temperatures, and allows the engine's front cylinders to breathe more efficiently. All of this results in gains as high as 10 hp, increased throttle response, and a fuel efficiency increase of more than 2mpg. Unlike competitors' spacers, Skunk2's Intake Plenum Spacer V2.0 is constructed from an aerospace thermo-polymer composite that offers superior thermal insulation characteristics when compared to aluminum spacers or other heat-insulating gasket materials. A unique, industry-first, each plenum spacer's perimeter is injected sealed for tight fitment, eliminating the OEM gasket. Skunk2's plenum spacer is also easy to install and is packaged with all necessary hardware, including the necessary components to bypass the throttle body's water lines.

• Not For Use w/Factory Strut Tower Bar
• Lowers Intake Temperatures
• Increases Plenum Volume
• Gain Horsepower

This Part Fits:

Skunk2 now offers B-Series Air Temp block off plate for applications where the Air Temp is no longer used. This plate is CNC machined from 6061 aluminum and comes with mounting hardware.

• Anodized For Corrosion Resistance
• For B/D/H/F Series Engines
• CNC Machined 6061 Aluminum
• Includes Mounting Hardware
• O-Ring Sealed

This Part Fits:

Skunk2 Racing is proud to announce the next generation of high performance intake manifolds for the Honda D16Z6 and D16Y8! The much anticipated Ultra Race Intake Manifold for the single cam D Series is the result of years worth of R&D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.

• Fits ALL Popular Chassis Configurations - Not Just Race Cars
• Optional Billet Aluminum Plenum Spacers In 1L Or 2L Sizes
• Raised 81mm Velocity Stacks - Plenty Of Material To Port
• 6.5 in. Tilted/Tapered Hi-Velocity Runners
• Generously Cast Runner Walls for Porting
• Includes Thermal Manifold Flange Gasket
• Hi-Grade Mounting Hardware
• US Patent No. D673977S
• All Black

This Part Fits:

The engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. Years of R&D have culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Following our Ultra Race B & K Series Intake Manifolds, as well as using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno and on-car testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Ultra Series Intake Manifolds are made from high-grade 356 aluminum alloy for a strong and lightweight design, CNC-machined for a precise fit, and individually inspected for quality assurance. The large 90mm throttle body opening, 81mm velocity stacks, and hi-velocity intake runners with smooth transitions allow the Ultra Series Manifold to outflow the competition. Designed to be used with built, high-horsepower naturally aspirated or forced induction setups, the Skunk2 Ultra Series Intake Manifold helps provide a new level affordable high-end intake technology to the marketplace. 1L and 2L Plenum Spacers upgrades available.

• 90mm TB Inlet/5.0 Ford Bolt Pattern
• Silver Adapter
• 3.5L Volume

This Part Fits:

Skunk2 Racing is proud to announce the next generation of high performance intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads! The much anticipated Ultra Race Intake Manifold is the result of years worth of R&D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.

• Unique Mounting Flange Universally Fits All B Series VTEC Heads
• Provisions For Additional Injectors On Bottom Side Of Runners
• Optional Billet Aluminum Plenum Spacers In 1L Or 2L Sizes
• Raised 87mm Velocity Stacks - Plenty Of Material To Port
• 90mm Throttle Body Flange - Std. 5.0L Ford Pattern
• Available in 3.5L/4.5L And 5.5L Configurations
• 6.5 in. Tilted/Tapered Hi-Velocity Runners
• Generously Cast Runner Walls for Porting
• Includes Thermal Manifold Flange Gasket
• Hi-Grade Mounting Hardware
• US Patent No. D673977S
• Powder Coated Black

This Part Fits:

Skunk2 Racing is proud to announce the next generation of high performance intake manifolds for the Honda B16A/ B17A and B18C engine or VTEC cylinder heads! The much anticipated Ultra Race Intake Manifold is the result of years worth of R&D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.

• Unique Mounting Flange Universally Fits All B Series VTEC Heads
• Provisions For Additional Injectors On Bottom Side Of Runners
• Optional Billet Aluminum Plenum Spacers In 1L Or 2L Sizes
• Raised 87mm Velocity Stacks - Plenty Of Material To Port
• 90mm Throttle Body Flange - Std. 5.0L Ford Pattern
• Available in 3.5L/4.5L And 5.5L Configurations
• 6.5 in. Tilted/Tapered Hi-Velocity Runners
• Generously Cast Runner Walls for Porting
• Includes Thermal Manifold Flange Gasket
• Hi-Grade Mounting Hardware
• US Patent No. D673977S

This Part Fits:

More than a decade ago, Skunk2s engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2's Pro Series Intake Manifold for Honda's H-series features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's H-series engines are a direct-fit replacement for all H-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.

• Ideal For Turbocharged And Naturally Aspirated Applications
• 70mm Throttle Body Opening Can Be Port-Matched Up To 74 mm
• Eliminates Secondary Butterflies

This Part Fits:

More than a decade ago, Skunk2s engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2's Pro Series Intake Manifold for Honda's H-series features a larger plenum and oversized runners when compared to the OEM version for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's H-series engines are a direct-fit replacement for all H-series engines and are compatible with all factory sensors. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.

• Ideal For Turbocharged And Naturally Aspirated Applications
• 70mm Throttle Body Opening Can Be Port-Matched Up To 74 mm
• Limited-Edition Black Series Finish

This Part Fits:

More than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series non-VTEC engines features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.

• 70mm throttle Body Opening Can Be Port-Matched Up To 74mm
• As Cast

This Part Fits:

More than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold in its signature Black Series finish for Hondas B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them.

• 70mm throttle Body Opening Can Be Port-Matched Up To 74mm
• Limited-Edition Black Series Finish
• Eliminates Secondary Butterflies

This Part Fits:

More than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the 'street enthusiast' who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined to best match the cylinder head's ports. Skunk2's Pro Series Intake Manifold's shape and design also increases wave scavenging effects at the engine's ideal operating range, which allow for a broad increase in usable power. Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2's Pro Series Intake Manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality.

• Ideal For Turbocharged And Naturally Aspirated Applications
• Eliminates Secondary Butterflies
• As Cast

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications. Skunk2's engineers spent nearly three years developing and testing its H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2's straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary. Alpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal's grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2's two-piece forgings provide a precision-tight fit between the rod's cap and its beam without resorting to the brittle materials required by other processes. Alpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2's carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Small End Width 21.41
• Magna-flux Inspected
• Big End Width 21.41
• Balanced +/- 1 Gram
• Weight 527 Grams
• Length 129.39mm
• Small End 22mm
• Big End 53mm

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 510 grams
• Length 138.63mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 546 grams
• Length 153.00mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 540 grams
• Length 143.15mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications. Skunk2's engineers spent nearly three years developing and testing its H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2's straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary. Alpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal's grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2's two-piece forgings provide a precision-tight fit between the rod's cap and its beam without resorting to the brittle materials required by other processes. Alpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2's carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Fatter H-beam Design Without Drastic Weight Increase
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 523 Grams
• Length 134.35mm
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 491 grams
• Length 152.00mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications. Skunk2's engineers spent nearly three years developing and testing its H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2's straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary. Alpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal's grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2's two-piece forgings provide a precision-tight fit between the rod's cap and its beam without resorting to the brittle materials required by other processes. Alpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2's carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 538 grams
• Length 137.00mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications. Skunk2's engineers spent nearly three years developing and testing its H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2's straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary. Alpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal's grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2's two-piece forgings provide a precision-tight fit between the rod's cap and its beam without resorting to the brittle materials required by other processes. Alpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2's carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 510 grams
• Length 138.00mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits:

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications. Skunk2's engineers spent nearly three years developing and testing its H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2's straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary. Alpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal's grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2's two-piece forgings provide a precision-tight fit between the rod's cap and its beam without resorting to the brittle materials required by other processes. Alpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2's carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle.

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 509 grams
• Length 137.00mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

This Part Fits: