The MagnaFlow® INEOS Grenadier SUV Overland Series™ Cat-Back Performance Exhaust System #19702 is engineered for off-road function and built to explore further. This performance exhaust system is designed for the 2024-2026 Ineos Grenadier SUV equipped with the L6 3.0L engine. The high clearance exhaust design of this kit is intended to keep your vehicle clear of any challenging terrain or obstacles you may come across. #19702 3” diameter mandrel bent main piping passes through a straight-through resonator and a specifically tuned performance oval muffler with No Drone Technology (NDT) before exiting in a dual high-clearance rear exit with black chrome tips. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19702 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This INEOS Grenadier cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty.

• No Drone Technology [NDT] Allows For A Quiet Cabin
• No-Drone-Technology allows for a quiet cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow Chevrolet Colorado / GMC Canyon Overland Series Cat-Back Performance Exhaust System #19648 is engineered for off-road function and built to explore further. This Chevrolet Colorado / GMC Canyon exhaust system is designed for the 2023-2024 Chevrolet Colorado and GMC Canyon equipped with the L4 2.7L engine option. The high clearance exhaust design of this kit is designed to keep your truck clear of any challenging terrain or obstacles you may come across. #19648 3" diameter mandrel bent main piping passes through an 18" straight-through oval muffler and No Drone Technology (NDT) tuned chamber before exiting in a high-clearance single passenger side rear exit style. MagnaFlow NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. This truck exhaust kit can be tailored to your preferred exhaust tone by installing various exhaust modules that are integrated with the muffler's accessory port. The included pipe cap, J-pipe and NDT modules can be combined in different configurations to mitigate a wide range of droning frequencies. Looking for a smoother, quieter ride on the trails? Simply connect the NDT module. Prefer a more aggressive signature sound? Install the pipe cap to cover the muffler accessory port. Exhaust kit #19648 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Chevrolet Colorado / GMC Canyon cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow's limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow Ford Bronco Sport Street Series Axle-Back Performance Exhaust System #19553 brings MagnaFlow’s deep signature sound and dyno-proven performance to your 2021-2026 Ford Bronco Sport. Exhaust kit #19553 is compatible with the 1.5L and 2.0L EcoBoost engine options and utilizes MagnaFlow’s No Drone Technology (NDT) to keep unwanted noises in check at lower engine speeds. #19553 is engineered to facilitate moderate exterior sound levels while keeping exhaust volume at a mild level in your SUV’s interior. This 2021-2026 Ford Bronco Sport exhaust system features mandrel bent, 2.5” diameter tubing that flows through an NDT resonator and a straight-through muffler before terminating in a dual exit layout with 4” diameter black chrome finished tips. The entire exhaust kit was created using CNC precision robotic manufacturing and durable 100% stainless steel construction. Exhaust system #19553 is covered by MagnaFlow’s limited lifetime warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19538 empowers your 1996-2002 Toyota 4Runner overland rig with MagnaFlow®’s deep signature exhaust note and dyno-proven performance. MagnaFlow® #19538 has been weight optimized and designed to provide improved ground clearance thanks to its undercarriage-hugging, mandrel bent 2.5” main piping paired with a no-tip, high-clearance passenger side exit. These features improve ground clearance, departure angles and overall utility. MagnaFlow® exhaust kit #19538 was developed to be compatible with the most common bolt-on aftermarket modifications. The single straight-through muffler is augmented by a quarter-wave NDT resonator, which utilizes MagnaFlow®’s No Drone Technology to cancel out the undesirable frequencies of your Toyota 4Runner. This feature preserves the character of your motor’s exhaust while allowing for long distance highway cruising to overland destinations without dealing with tiresome interior droning noises. Exhaust system #19538 was produced using CNC precision robotic manufacturing, enabling precise fitment and easy, bolt-on installation. The entire exhaust kit features durable, 100% stainless steel construction and is covered by MagnaFlow®’s limited lifetime construction warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

The MagnaFlow 2019-2024 Chevrolet Blazer Street Series Cat-Back Performance Exhaust System 19466 brings out the personality of your 3.6L 2019-2024 Chevrolet Blazer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Chevrolet Blazer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Blazer's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19466 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19466 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Mazda 3 Street Series Axle-Back Performance Exhaust System #19459 enhances your 2019-2026 Mazda 3 with MagnaFlow’s renowned smooth tone, moderate interior noise levels and dyno-proven performance. The Mazda 3 Street Series Exhaust System provides a stealthy yet aggressive appearance to match its increased power and sound. This axle-back exhaust kit features a straight-through muffler, dual split rear 4” black chrome-finished tips and is designed to bolt on easily thanks to CNC precision robotic manufacturing, mandrel bent tubing and 2.5” diameter piping. A limited lifetime warranty and 100% steel construction ensure a durable exhaust system that will last for as long as your 2019-2026 Mazda 3 does. Whether tearing up a side street or enjoying a day at the track, the sound, performance and value of the MagnaFlow Mazda 3 Street Series Axle-Back Performance Exhaust System #19459 is hard to beat.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Jeep Loop Delete 19432 is a 2in. diameter mandrel bent stainless steel pipe that i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Mandrel bent tubing for smoother transitions

This Part Fits:

The MagnaFlow 2018-2023 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19417 brings out the personality of your 3.6L 2018-2023 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System 19275 brings out the personality of your 2.7L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19275 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19275 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 2005-2012 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17115 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2005-2012 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17115 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17115's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17115 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

• Available for gas or diesel trucks and SUV's
• Available For Gas Or Diesel Trucks And SUVS
• High Flow Straight Through Design
• 100 Percent Stainless Steel
• 100% Stainless Steel

This Part Fits:

The MagnaFlow 2006-2010 Hummer H3 Street Series Cat-Back Performance Exhaust System 16630 brings out the personality of your 3.5L, 3.7L 2006-2010 Hummer H3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Hummer H3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hummer H3's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16630 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16630 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance

This Part Fits:

The MagnaFlow 2001-2005 Honda Civic Street Series Cat-Back Performance Exhaust System 15712 brings out the personality of your 1.7L 2001-2005 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15712 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15712 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC Precision Robotic Manufacturing Techniques
• Dyno-proven performance
• Dyno Proven Performance

This Part Fits:

The MagnaFlow Performance Exhaust Tailpipe 15455 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15455 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

• Durable Corrosion-Resistant Stainless Steel Construction
• CNC precision robotic manufacturing techniques
• Mandrel bent tubing

This Part Fits:

BRExhaust Direct-Fit Front Pipe Kit 107-0128 offers unparalleled quality and durability to keep your vehicle on the road. Crafted from premium stainless steel, these front pipes are meticulously engineered to seamlessly replace the factory component, meeting or exceeding original specifications. The Direct-Fit design ensures a straightforward bolt-on installation process. For your convenience, BRExhaust Direct-Fit Front Pipe Kit 107-0128 includes all essential components, such as gaskets, clamps, and necessary hardware. With a strong dedication to upholding factory standards, these front pipes guarantee a hassle-free restoration of your vehicles exhaust system to its original form and function. This Direct-Fit Front Pipe Kit is designed to fit the 1988-1995 Toyota 4Runner 2.4L & 1988-1995 Toyota Pickup 2.4L. BRExhaust Direct-Fit Front Pipe Kit 107-0128 includes (2) 2-Bolt Gaskets, (5) Nuts, (5) Bolts, (2) Ring Gaskets. BRExhaust Direct-Fit Front Pipe Kit 107-0128 features durable stainless steel construction and is covered by a 2 year warranty.

• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Bolt-on design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• Stainless steel construction with mandrel bends provides long-lasting, high corrosion resistance and durability
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0948’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2016-2024 Chevrolet Malibu 1.5L & 2018-2019 Chevrolet Malibu 1.8L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 includes (2) Nuts, (4) Washers, (3) 2.25in. Band Clamps, (1) 2-Bolt Gasket, (2) Bolts and interchanges with OE parts 22816982, 84251079. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0948 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0704 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0704’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0704 includes (1) 2.125in. U-Bolt Clamp, (4) 2.25in. U-Bolt Clamps and interchanges with OE parts 6C3A-3865-B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0704 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0511 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0511’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0511 includes (4) 3.125in. U-Bolt Clamps, (2) Washers, (2) Nuts, (2) Bolts and interchanges with OE parts BL3Z-5230-B, BL3Z-5230-F, BL3Z-5A212-D, BL3Z-5A212-E, BL3Z-5A212-F, BL3Z-5A212-G, BL3Z-5A212-J, EL3Z-5230-A. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0511 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0504’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 includes (1) 2-Bolt Gasket, (2) 2.125in. U-Bolt Clamps, (1) 2.125in. Band Clamp, (2) Nuts, (2) Bolts and interchanges with OE parts CV6Z-5230-CJ, CV6Z-5230-Q, CV6Z-5230-S, CV6Z-5230-T, CV6Z-5230-X, CV6Z-5230-Y, CV6Z-5A289-C, CV6Z-5A289-D, CV6Z-5A289-E. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0504 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0252 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0252’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2010-2017 Subaru Legacy 2.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0252 includes (1) 2-Bolt Gasket, (1) Spring Bolt Kit, (1) Donut Gasket, (1) 2.25in. U-Bolt Clamp, (2) Bolts, (2) Nuts and interchanges with OE parts 44200AJ08A, 44300AJ18A, 44300AJ18B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0252 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0185’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2001-2007 Chrysler Town & Country 3.3L & 2001-2005 Dodge Grand Caravan 3.3L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 includes (2) 2.125in. U-Bolt Clamps, (2) 2.25in. U-Bolt Clamps and interchanges with OE parts 4881 332AE, 4881 332AF, 4881 332AG, 4881 332AH, 4881 333AH, 4881 333AI, 4881 333AJ. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0094’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2006-2008 Subaru Forester 2.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 includes (1) Donut Gasket, (1) Spring Bolt Kit, (1) 2-Bolt Gasket, (2) 2.125in. U-Bolt Clamps, (2) Nuts, (2) Bolts and interchanges with OE parts 44200SA040, 44200SA041, 44300SA130, 44300SA131. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0094 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0023’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 1996-2000 Toyota 4Runner 3.4L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 includes (1) 2-Bolt Gasket, (2) Ring Gaskets, (6) Nuts, (2) 2.25in. U-Bolt Clamps, (4) Bolts and interchanges with OE parts 17403-62030, 17405-62030, 17420-62240. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0023 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

The Injen Technology engineers are experts when it comes to performance, PERIOD. From Cars to Trucks to Powersports, Injen has a variety of exhaust systems to choose from. All of Injen Technology Performance exhaust systems are constructed from mandrel bent stainless steel tubing Mandrel-bending ensures the tubing maintains its shapes and size throughout the entire length, providing smooth, unrestricted airflow. From the Investment cast flanges to the custom hangers, all Injen exhaust systems are 100% TIG welded and handcrafted in the USA and include all tubing, mufflers, and hardware necessary for a hassle free installation. Each system is uniquely designed to offer an aggressive sound that brings out some massive power. Like all other Injen products, the Injen exhaust systems are proudly built in Pomona, CA.

• If you're looking to improve sound, power, and looks then this is the system for you!
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Stainless Steel Investment Cast Flange for a Fast and Easy Install
• Full 60MM piping made from premium 304 SS Mandrel-Bent Tubing
• Dyno Proven gains of up to 5 hp and 4 lb-ft. of torque
• Features Injen's classic round JDM style rear muffler
• Premium Stainless Steel Hardware and Hangers
• Stainless Steel Resonated w/Rolled Tips
• Manufactured in Pomona, California USA
• Beautiful 4.0"polished exhaust tip
• No Cutting or Welding Required
• Axle Back exhaust system

This Part Fits:

Replace the restrictive crushed factory down pipe on your 2015.5-2016 LML Duramax with this full 3" Stainless steel down pipe. For use with factory turbo or factory style drop in turbo on trucks with the 3 bolt flange exhaust connection. - - Replaces the following GM Part Numbers: 12674630, 12655717 - - For 2011-2014 style exhaust system with v-band connection use Down pipe PN: WCF100704

• 3" Stainless Downpipe (3 bolt flange)
• Heat Wrap and clamps
• No Tuning Required
• Made in USA

This Part Fits:

Replace the restrictive crushed factory down pipe on your 2011-2016 LML Duramax with this full 3" Stainless Steel down pipe. For use with factory turbo or factory style drop in turbo on trucks using a v-band connection style exhaust, NOT the 3 bolt flange style exhaust. - - Replaces the following GM Part Numbers: 12643610, 12638304, 12643214 - - Note: For 3 bolt style down pipe use PN: WCF100705

• 3" Stainless Downpipe (v-band flange)
• Heat Wrap and clamps
• No Tuning Require
• Made in USA

This Part Fits:

Replace the restrictive crushed factory turbo down pipe / exhaust front pipe on the 6.6L Duramax Diesel V8 found in the 2004.5 - 2010 Chevrolet Silverado / GMC Sierra 2500 / 3500 HD truck with this high flow, heat wrapped, full 3" Stainless steel down pipe. For use with OEM or factory style drop in turbocharger. No tuning required. - - Replaces the following GM Part Numbers: 98050150

• 3" Stainless Steel Downpipe
• Heat Wrap and Clamps
• No tuning required!
• Made in USA

This Part Fits:

Replace the lightweight 16G, leak-prone passenger side OEM up pipe in your 2001-2004 6.6L LB7 Duramax with this heavy-duty 11 gauge 2" Stainless up pipe from WCFab. Our HD Stainless Bellow that will not crack and leak like OEM. Larger diameter and better flow than stock helps to increase Turbo spool up and decrease EGTs. This up pipe is built to clear a conventional downpipe behind the engine in single turbo applications with the mounting location in the valley of the engine like stock. This product may also be used with a twin / compound turbo setup, but we recommend upgrading to our Twin Turbo up pipe WCF100648 in those installations for superior performance. - - Includes Up Pipe Gaskets - - Replaces GM 97302261 - - NOTE: This up pipe will ONLY fit with OEM exhaust manifold or WCFab Duramax Billet Exhaust Manifolds (WCF100363). It is NOT designed for use with aftermarket exhaust manifolds that move the exhaust outlet location further away from the cylinder head. - - Designed for use with WCFab downpipe. OEM and another aftermarket downpipes may require additional modifications

• Heavy Duty 2" Passenger Side Up-Pipe (Clearanced for conventional down pipes)
• Fully TIG Welded 11 GA Stainless Steel Construction
• Includes Up Pipe Gaskets (2)
• Made in USA

This Part Fits:

Replace the lightweight 16G, leak-prone Driver side OEM up pipe with this heavy-duty 11 gauge 2" Stainless up pipe. HD Stainless Bellow that will not crack and leak like OEM. Increase Turbo spool up and decrease EGTs. Will work with ANY Turbo setup, single or compound, compatible with factory exhaust manifold only. Includes Up Pipe Gaskets. - - NOTE: This up pipe will ONLY fit with OEM exhaust manifolds or WCFab Duramax Billet Exhaust Manifolds (WCF100363). 2007.5-2010 LMM Requires Coolant Bypass/Relocation Fitting WCF100798 - - Compatible with LB7, LLY, LBZ, LMM, and LML Duramax - - Replaces the following GM Part Numbers: 98066019, 12637379, 12634564

• Fully TIG Welded 11 GA Stainless Steel Construction
• Heavy Duty 2" Driver Side Up Pipe
• Up Pipe Gaskets (2)
• Made in USA

This Part Fits:

Replace the lightweight, leak-prone passenger side OEM up pipe with this heavy-duty 11 gauge 2" Stainless up pipe. HD Stainless Bellows that will not crack and leak like OEM. Increase Turbo spool-up and decrease EGTs. This up pipe is built with more sweeping, less aggressive bends for use in COMPOUND / TWIN TURBO STYLE APPLICATIONS ONLY. It WILL NOT clear a conventional downpipe behind the engine off of the turbocharger in the valley. - - Compatible with only factory exhaust manifolds or WCFab Duramax Billet Exhaust Manifolds (WCF100363). - - NOTE: This up pipe will ONLY fit with OEM exhaust manifold.

• Full flow design eliminates clearance dent and tight bends required for engine valley mount single turbo down pipes
• Heavy Duty 2" Passenger Side Up Pipe Passenger Side Up Pipe for Compound / Twin Turbo Applications
• WILL NOT CLEAR a Conventional Single Turbo down pipe!
• Fully TIG Welded 11 GA Stainless Steel Construction
• Up Pipe Gaskets (2)
• Made in USA

This Part Fits:

Replace the lightweight 16G, leak prone, 1 5/8" OEM up pipes on your 2017-2025 6.6L L5P Duramax equipped Chevrolet Silverado or GMC Sierra 2500 / 3500 HD truck with these heavy duty 11 gauge 2" Stainless up pipe kit. HD Stainless Bellows that will not crack and leak like OEM. Increase Turbo spool-up and decrease EGT's. This kit is for use with factory exhaust manifolds. - - Fully compatible with WCFab Billet Exhaust Manifolds (Part Number WCF100373). - - INCLUDES GASKETS! -NO Tuning required, bolt on! -Will fit on stock truck no other modifications or upgrades necessary! - - Replaces the following GM Part Numbers: 12688021, 12702943, 12681437, 12680270, 12681162, 12674813, 12681162, 12676611 - - Also fits 2019+ L5D Duramax (4500/5500/6500) Medium Duty Trucks.

• Fully TIG Welded 11 GA Stainless Steel Construction
• Heavy Duty 2" Passenger Side Up Pipe
• Heavy Duty 2" Driver Side Up Pipe
• Flows 26% Better than OEM
• Up Pipe Gaskets (4)
• NO TUNING REQUIRED
• Made in USA

This Part Fits: