this collector optimizes and balances the gas flow to produce an acoustically tuned sound with no drone. Three resonators – two at the back of the collector and one in the middle pipe – further tune the sound experience to create a sporty racing tone, fully enhancing the engine's characteristics with a deep and enthusiastic sound, to give the occupants a feeling of exhilaration that is never interrupted by excess noise. The engineers have placed a special emphasis on the acoustics in the middle and high rev range, with a high-frequency tone at higher rpms and more sound at idle and revving. This sound is managed by two megaphone-shaped titanium tailpipes that are welded to the exhaust and specially coated to resist any color changes at high temperatures. The shape of the tailpipes influences the sound. Developed to decrease back pressure, the system weighs in at 6,8 kg, which is 48,3 % lighter than stock and yields power gains of 3.5 kW (4.8 hp) at 6,950 rpm and torque increases of 4.9 Nm at 6,950 rpm when tested on The Akrapovic dyno against a Toyota GR Yaris with a standard stock exhaust. This exhaust is designed for use on racetracks and closed courses only. The product is bolt on and no ECU remapping is needed for this configuration.An optional Evolution link pipe is available for customers looking to extend the exhaust tuning possibilities for even better performance of The Akrapovic Slip-On Race Line (Titanium) system.THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Created from high-grade, durable, and lightweight titanium, the Evolution Line (Titanium) is 45% lighter than the standard stock version. It features specially-designed tailpipes – fashioned in the in-house foundry – that exit on both sides of the car. This new Evolution Line (Titanium) exhaust has been perfectly routed to fit within the limited space of the car, and its surface has been coated for increased durability. Power and torque levels are increased through the entire rpm range, with increases of 15.8 kW (21.4 hp) and 25.3 Nm at 5,950 rpm when tested on The Akrapovic dyno against a G 63 with a standard stock system. A pair of exhaust valves behind the rear mufflers provide control of the exhaust tones, delivering a uniquely deep and sporty sound. The exhaust complies with ECE type approval and does not require remapping.

This Part Fits:

Year	Make	Model	Submodel
2025	Mercedes-Benz	G63 AMG	Base

3" 409 Stainless Steel Construction: This muffler delete pipe is constructed from 3" mandrel-bent 409 stainless steel tubing for maximum strength and durability.Installation: Utilizing factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Computer-Aided Design: Utilizing factory style flange and hangers this system is a direct bolt-on system, some cutting is required.MIG Welded: 100% MIG welded for race-proven strength and durability.Fitment Note: Will fit both the factory single and the factory dual exhausts.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

• Constructed from 3 IN Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• Hardware is Included for a Hassle-Free Installation
• Replaces Factory Muffler, for an Aggressive Sound
• 100% MIG Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2019-2024	Ram	1500	Big Horn
2019-2024	Ram	1500	Laramie
2019-2021	Ram	1500	Laramie Longhorn
2019-2024	Ram	1500	Limited
2021-2024	Ram	1500	Limited Longhorn
2019-2024	Ram	1500	Lone Star
2021	Ram	1500	Longhorn
2019-2024	Ram	1500	Rebel
2020-2021	Ram	1500	Special Service
2019-2024	Ram	1500	Tradesman

This DPF-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 5" diameter polished 304 stainless steel intercooled clamp-on exhaust tips. The tips features an aFe POWER logo plate riveted on for a unique style. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability. This system fits: Double Cab / Short-Bed - 149.4" Wheelbase, Crew Cab / Short-Bed - 158.9" Wheelbase, Double Cab / Long-Bed - 162.4" Wheelbase, Crew Cab / Long-Bed - 172" Wheelbase

• Dual 5" Diameter Polished 304 stainless steel Intercooled Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 4" Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2021-2026	Chevrolet	Silverado 2500 HD	Custom
2020-2026	Chevrolet	Silverado 2500 HD	High Country
2020-2026	Chevrolet	Silverado 2500 HD	LT
2020-2026	Chevrolet	Silverado 2500 HD	LTZ
2020-2026	Chevrolet	Silverado 2500 HD	WT
2024-2026	Chevrolet	Silverado 2500 HD	ZR2
2020-2026	Chevrolet	Silverado 3500 HD	High Country
2020-2026	Chevrolet	Silverado 3500 HD	LT
2020-2026	Chevrolet	Silverado 3500 HD	LTZ
2020-2026	Chevrolet	Silverado 3500 HD	WT
2020-2026	GMC	Sierra 2500 HD	AT4
2024-2026	GMC	Sierra 2500 HD	AT4X
2020-2021	GMC	Sierra 2500 HD	Base
2020-2026	GMC	Sierra 2500 HD	Denali
2024-2026	GMC	Sierra 2500 HD	Denali Ultimate
2022-2026	GMC	Sierra 2500 HD	Pro
2020-2026	GMC	Sierra 2500 HD	SLE
2020-2026	GMC	Sierra 2500 HD	SLT
2020-2026	GMC	Sierra 3500 HD	AT4
2020-2021	GMC	Sierra 3500 HD	Base
2020-2026	GMC	Sierra 3500 HD	Denali
2024-2026	GMC	Sierra 3500 HD	Denali Ultimate
2022-2026	GMC	Sierra 3500 HD	Pro
2020-2026	GMC	Sierra 3500 HD	SLE
2020-2026	GMC	Sierra 3500 HD	SLT

Large Bore-HD 5 IN 409 Stainless Steel DPF-Back Exhaust System w/Polished Tip RAM Diesel Trucks 19-26 L6-6.7L (td)

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5 IN Mandrel-Bent 409 Stainless Steel Tubing
• 7 IN Diameter Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2019-2025	Ram	2500	Big Horn
2019-2025	Ram	2500	Laramie
2019-2021	Ram	2500	Laramie Longhorn
2019-2025	Ram	2500	Limited
2021-2025	Ram	2500	Limited Longhorn
2019-2025	Ram	2500	Lone Star
2023-2025	Ram	2500	Rebel
2024-2025	Ram	2500	Special Service
2019-2025	Ram	2500	Tradesman
2019-2025	Ram	3500	Big Horn
2019-2025	Ram	3500	Laramie
2019-2020	Ram	3500	Laramie Longhorn
2019-2025	Ram	3500	Limited
2021-2025	Ram	3500	Limited Longhorn
2019-2022	Ram	3500	Lone Star
2019-2020	Ram	3500	SLT
2024-2025	Ram	3500	Special Service
2019-2025	Ram	3500	Tradesman

This Takeda "muffler-delete" axle-back exhaust system eliminates the OE restrictive muffler and delivers a deepened exhaust tone while increasing performance.

Installation Instructions

• Oversize Mandrel-Bent Stainless Steel Tubing for Maximum Flow
• Reduces Substancial Weight Over Factory System
• 100% MIG Welded for Strength and Durability
• Delivers an Aggressive Exhaust Tone

This Part Fits:

Year	Make	Model	Submodel
2018-2023	Subaru	Crosstrek	Base
2019	Subaru	Crosstrek	Hybrid
2018-2023	Subaru	Crosstrek	Limited
2018-2023	Subaru	Crosstrek	Premium
2021-2023	Subaru	Crosstrek	Sport
2018-2023	Subaru	Impreza	Base
2018-2023	Subaru	Impreza	Limited
2018-2023	Subaru	Impreza	Premium
2018-2023	Subaru	Impreza	Sport

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 4 IN diameter black 304 stainless steel clamp-on exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This DPF-back exhaust gives you the option for a side exit or rear exit tailpipe. Both options will evacuate the exhaust gasses from under the vehicle. Utilizing a factory style hanger this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Upgrade your Sprinter's exhaust with this Vulcan Series DPF-back. Designed to evacuate NOx from under your van, it’s a must-have for camping enthusiasts.
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hanger for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2010-2025	Mercedes-Benz	Sprinter 2500	Base
2010-2025	Mercedes-Benz	Sprinter 3500	Base

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a dual 3-1/2 IN diameter polished 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 3 1/2 IN Diameter Polished 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2022-2024	Ford	Maverick	Lariat
2022-2026	Ford	Maverick	XL
2022-2026	Ford	Maverick	XLT

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a dual 3-1/2 IN diameter black 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 3 1/2 IN Diameter Black 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2022-2024	Ford	Maverick	Lariat
2022-2026	Ford	Maverick	XL
2022-2026	Ford	Maverick	XLT

5" Aluminized Steel Construction: This DPF-back exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum strength and durability.7" Diameter Black Exhaust Tip: Finishing off this exhaust system is a 7" diameter black stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Fitment Note: This product only fits Crew Cab, Long Bed (8' Box) 169" wheelbase models.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5 Mandrel-Bent Aluminized Steel Tubing
• 7 Diameter Black Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Year	Make	Model	Submodel
2019-2025	Ram	2500	Big Horn
2019-2025	Ram	2500	Laramie
2019-2021	Ram	2500	Laramie Longhorn
2019-2025	Ram	2500	Limited
2021-2025	Ram	2500	Limited Longhorn
2019-2025	Ram	2500	Lone Star
2024-2025	Ram	2500	Special Service
2019-2025	Ram	2500	Tradesman
2019-2025	Ram	3500	Big Horn
2019-2025	Ram	3500	Laramie
2019-2020	Ram	3500	Laramie Longhorn
2019-2025	Ram	3500	Limited
2021-2025	Ram	3500	Limited Longhorn
2019-2022	Ram	3500	Lone Star
2019-2020	Ram	3500	SLT
2024-2025	Ram	3500	Special Service
2019-2025	Ram	3500	Tradesman

This system produced gains of up to +20 HP and +23 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-5/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined mild steel flanges are used used for a secure leak-free seal. These headers retain your stock catalytic converters and are a direct bolt-on installation which requires no cutting or drilling to provide a hassle-free installation. Mitered collectors decrease turbulence and increase exhaust velocity. The result is increased horsepower, torque and improved throttle response. A Machined ball flange ensures a leak-free seal over the life of the vehicle. 100% MIG-Welded for race-proven strength and durability.

• Heavy Duty Laser Cut Machined Flanges are used for a Durable Leak-Free Seal
• Constructed from 1-5/8 IN Mandrel-Bent 304 Stainless Steel Tubing
• Works with Factory Exhaust System with No Modifications Necessary
• Optimized Tube Lengths for Improve Flow and Performance
• 100% MIG-Welded for Strength and Durability
• Up to +20 HP and +23 lbs. x Ft. TQ.

This Part Fits:

Year	Make	Model	Submodel
2015-2023	Ford	F-150	King Ranch
2015-2025	Ford	F-150	Lariat
2015-2023	Ford	F-150	Platinum
2016-2025	Ford	F-150	SSV
2024-2025	Ford	F-150	STX
2023-2025	Ford	F-150	Tremor
2015-2025	Ford	F-150	XL
2015-2025	Ford	F-150	XLT

This system produced gains of up to +11 HP and +19 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined mild steel flanges are used used for a secure leak-free seal. Utilizing factory style and flanges this system is designed to fit in the stock locations with no cutting or modifications required for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Heavy Duty Laser Cut Machined Mild Steel Flanges are used for a Durable Leak-Free Seal
• Constructed from 1-7/8 IN - 2-1/4 IN Mandrel-Bent 304 Stainless Steel Tubing
• Works with Factory Exhaust System with No Modifications Necessary
• Optimized Tube Lengths for Improve Flow and Performance
• 100% MIG-Welded for Strength and Durability
• Up to +11 HP and +19 lbs. x Ft. TQ.

This Part Fits:

Year	Make	Model	Submodel
2019-2022	Ram	2500	Big Horn
2019-2022	Ram	2500	Laramie
2019-2021	Ram	2500	Laramie Longhorn
2019-2022	Ram	2500	Limited
2019-2022	Ram	2500	Lone Star
2019-2022	Ram	2500	Power Wagon
2019-2022	Ram	2500	Tradesman
2019-2022	Ram	3500	Big Horn
2019-2022	Ram	3500	Laramie
2019-2020	Ram	3500	Laramie Longhorn
2019-2022	Ram	3500	Limited
2019-2022	Ram	3500	Lone Star
2019-2022	Ram	3500	SLT
2019-2022	Ram	3500	Tradesman

BLOX Racing Exhaust Gasket - 3.5inch (3-bolt)

A fully divided pulse manifold made from high-silicon ductile iron designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, reducing cyclic thermal fatigue and greatly increasing manifold longevity. This kit comes with new gaskets, bolts, and spacers for maximum convenience and value.

• Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
• Thick-walled casting and slip joint prevent cracking and exhaust leaks
• Includes grade 10.9, black oxide-coated bolts, and spacers
• Includes Grade 10.9; Black Oxide-Coated Bolts And Spacers
• Includes EGR Port; Exhaust Port And Turbo Mount Gaskets
• Includes EGR port, exhaust port and turbo mount gaskets
• SEMA Certification No. SC-BDD01-0077
• Pre-drilled for pyrometer probes
• Replaces Chrysler #68205983AA
• Fully EGR-compatible

This Part Fits:

Year	Make	Model	Submodel
2013-2018	Ram	3500	Big Horn
2013-2018	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2013-2018	Ram	3500	Laramie Longhorn
2016-2018	Ram	3500	Limited
2013-2015,2017	Ram	3500	Lone Star
2013-2018	Ram	3500	SLT
2013	Ram	3500	ST
2013-2018	Ram	3500	Tradesman

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99305HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
1997-2005	Audi	A4	Base
2003-2006	Audi	A4	Cabriolet
1999-2005	Audi	A4 Quattro	Avant
1997-2005	Audi	A4 Quattro	Base
2000-2002	Audi	A6 Quattro	Base
2001-2002,2004-2008	Audi	S4	Avant
2000-2002,2004-2008	Audi	S4	Base
2004-2009	Audi	S4	Cabriolet
1995	BMW	750iL	Base
1997-2000	Buick	Century	Custom
1997-2000	Buick	Century	Limited
2005	Buick	LaCrosse	CX
2005	Buick	LaCrosse	CXL
2002-2003	Buick	Rendezvous	CX
2002-2003	Buick	Rendezvous	CX Plus
2002-2003	Buick	Rendezvous	CXL
2002-2003	Buick	Rendezvous	CXL Plus
2000	Chevrolet	Impala	Base
1997-2001	Chevrolet	Lumina	Base
1997-1999	Chevrolet	Lumina	LS
1997-1999	Chevrolet	Lumina	LTZ
1997-2003	Chevrolet	Malibu	Base
1997-2003	Chevrolet	Malibu	LS
1997-1999	Chevrolet	Monte Carlo	LS
2002	Chevrolet	Venture	Base
2002-2003	Chevrolet	Venture	LS
2002-2003	Chevrolet	Venture	LT
2002-2003	Chevrolet	Venture	Plus
2002-2003	Chevrolet	Venture	Value
2002-2003	Chevrolet	Venture	Warner Bros.
2003	Dodge	Ram 1500	Laramie
2002-2003	Dodge	Ram 1500	SLT
2002-2003	Dodge	Ram 1500	ST
2000-2002	Honda	Passport	EX
2000-2002	Honda	Passport	LX
2006	Hyundai	Sonata	GL
2006-2009	Hyundai	Sonata	GLS
2008-2009	Hyundai	Sonata	Limited
2008-2009	Hyundai	Sonata	SE
2004	Jeep	Liberty	Limited
2004	Jeep	Liberty	Renegade
2004	Jeep	Liberty	Sport
2006-2009	Kia	Optima	EX
2006-2009	Kia	Optima	LX
2009	Kia	Optima	SX
2007-2009	Kia	Rondo	EX
2007-2009	Kia	Rondo	LX
1998-2000	Mercedes-Benz	C280	Base
1998-1999	Mercedes-Benz	CL500	Base
2000-2002	Mercedes-Benz	E430	4Matic
1998-2002	Mercedes-Benz	E430	Base
1996-1999	Mercedes-Benz	S420	Base
2003	Mercedes-Benz	S430	4Matic
2000-2003	Mercedes-Benz	S430	Base
1996-1999	Mercedes-Benz	S500	Base
1998	Oldsmobile	Achieva	S
1999-2004	Oldsmobile	Alero	GL
1999-2004	Oldsmobile	Alero	GLS
1999-2003	Oldsmobile	Alero	GX
1997-1998	Oldsmobile	Cutlass	Base
1999	Oldsmobile	Cutlass	GL
1997-1999	Oldsmobile	Cutlass	GLS
1996-1997	Oldsmobile	Cutlass Supreme	Base
1996-1997	Oldsmobile	Cutlass Supreme	SL
2001-2003	Pontiac	Aztek	Base
2001	Pontiac	Aztek	GT
1997-2005	Pontiac	Grand Am	GT
2000-2005	Pontiac	Grand Am	GT1
1997-2005	Pontiac	Grand Am	SE
2000-2004	Pontiac	Grand Am	SE1
2000,2003-2004	Pontiac	Grand Am	SE2
1996,2005	Pontiac	Grand Prix	Base
2005	Pontiac	Grand Prix	GT
2004	Pontiac	Grand Prix	GT1
2004	Pontiac	Grand Prix	GT2
2004-2005	Pontiac	Grand Prix	GTP
1996-2000	Pontiac	Grand Prix	SE
2002-2003	Pontiac	Montana	Base
1997-1998	Pontiac	Trans Sport	Base
1998	Pontiac	Trans Sport	Montana
1998	Volkswagen	Beetle	Base
1999-2001	Volkswagen	Beetle	GL
1999-2001	Volkswagen	Beetle	GLS
1995-1999	Volkswagen	Cabrio	Base
1998,2000-2002	Volkswagen	Cabrio	GL
1998-2002	Volkswagen	Cabrio	GLS
2001-2002	Volkswagen	Cabrio	GLX
1997	Volkswagen	Cabrio	High Line
1992-1994	Volkswagen	Corrado	SLC
1995	Volkswagen	Golf	Celebration Edition
1995	Volkswagen	Golf	City
1995-2001	Volkswagen	Golf	GL
1999-2001	Volkswagen	Golf	GLS
1996-1999	Volkswagen	Golf	GTI
2000	Volkswagen	Golf	GTI GLS
1996-1998	Volkswagen	Golf	GTI VR6
1997	Volkswagen	Golf	Jazz
1997-1998	Volkswagen	Golf	K2
1995	Volkswagen	Golf	Sport
1997	Volkswagen	Golf	Trek
1995	Volkswagen	Jetta	Celebration Edition
1995	Volkswagen	Jetta	City
1995-2001	Volkswagen	Jetta	GL
1995-2001	Volkswagen	Jetta	GLS
1996-1999	Volkswagen	Jetta	GLX
1997-1998	Volkswagen	Jetta	GT
1997	Volkswagen	Jetta	Jazz
1998	Volkswagen	Jetta	K2
1996	Volkswagen	Jetta	Trek
1996,1998-1999	Volkswagen	Jetta	Wolfsburg Edition
2003-2005	Volkswagen	Passat	GL
1995-1996,1998-2005	Volkswagen	Passat	GLS
2004-2005	Volkswagen	Passat	GLS 4 Motion
1995-1997	Volkswagen	Passat	GLX
1999-2001	Volvo	S80	T6

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
1997-1998	Acura	CL	Base
1997-1999	Acura	CL	Premium
1997-1999	Acura	Integra	GS
1996-1999	Acura	Integra	GS-R
1996-1999	Acura	Integra	LS
1996-1998	Acura	Integra	RS
1996	Acura	Integra	Special Edition
1997-1998,2000-2001	Acura	Integra	Type R
1998-1999	Acura	SLX	Premium
1995-1998	Acura	TL	Base
1995-1998	Acura	TL	Premium
2006-2009	Audi	A3 Quattro	Base
1998	Audi	A4	Avant
1996-1999,2005-2008	Audi	A4	Base
2007-2008	Audi	A4	Cabriolet
1998-1999,2002-2009	Audi	A4 Quattro	Avant
1996-1999,2002-2009	Audi	A4 Quattro	Base
2007-2009	Audi	A4 Quattro	Cabriolet
1995-1997	Audi	A6	Avant
1995-2001,2006-2009	Audi	A6	Base
1995-2001,2009-2011	Audi	A6 Quattro	Avant
1995-2004,2009-2011	Audi	A6 Quattro	Base
1997-1999	Audi	A8	Base
2004-2008	Audi	S4	Avant
2004-2008	Audi	S4	Base
2004-2009	Audi	S4	Cabriolet
2002-2003	Audi	S6	Avant
2001-2003	Audi	S8	Base
2002	Audi	TT Quattro	ALMS Edition
2000-2006	Audi	TT Quattro	Base
2006	Audi	TT Quattro	Special Edition
2006-2007	BMW	525i	Base
2006-2007	BMW	525xi	Base
1997-1998,2008-2011	BMW	528i	Base
2009-2010	BMW	528i xDrive	Base
2008	BMW	528xi	Base
2006-2007	BMW	530i	Base
2006-2007	BMW	530xi	Base
1997-1998	BMW	540i	Base
1997-1998	BMW	740i	Base
1996-1998	BMW	740iL	Base
1993-1996	Buick	Century	Custom
1993,1996	Buick	Century	Limited
1993-1996	Buick	Century	Special
1994-1996	Buick	Regal	Custom
1996-1998	Buick	Skylark	Custom
1996-1997	Buick	Skylark	Gran Sport
1996-1997	Buick	Skylark	Limited
1996	Buick	Skylark	Olympic Gold Edition
2003-2007	Cadillac	CTS	Base
2003	Cadillac	CTS	Luxury
2003	Cadillac	CTS	Luxury Sport
1999-2000	Cadillac	Escalade	Base
2006-2007	Cadillac	SRX	Base
2005-2007	Cadillac	STS	Base
1996	Chevrolet	Beretta	Base
1996	Chevrolet	Beretta	Z26
1996-1997	Chevrolet	C1500	Base
1996-1998	Chevrolet	C1500	Cheyenne
1999	Chevrolet	C1500	LS
1996-1998	Chevrolet	C1500	Silverado
1996-1998	Chevrolet	C1500	WT
1996-1999	Chevrolet	C1500 Suburban	Base
1996-1999	Chevrolet	C1500 Suburban	LS
1996-1997,1999	Chevrolet	C1500 Suburban	LT
1996-1997,1999	Chevrolet	C2500	Base
1996-1998	Chevrolet	C2500	Cheyenne
1999	Chevrolet	C2500	LS
1996-1998	Chevrolet	C2500	Silverado
1998	Chevrolet	C2500	WT
1996-2005	Chevrolet	Cavalier	Base
1996-2005	Chevrolet	Cavalier	LS
2002-2005	Chevrolet	Cavalier	LS Sport
1997-1999	Chevrolet	Cavalier	RS
1996-2002	Chevrolet	Cavalier	Z24
2004-2005	Chevrolet	Classic	Base
2004	Chevrolet	Classic	LS
2005,2010	Chevrolet	Cobalt	Base
2005-2010	Chevrolet	Cobalt	LS
2005-2010	Chevrolet	Cobalt	LT
2006-2007	Chevrolet	Cobalt	LTZ
2008	Chevrolet	Cobalt	Sport
1996	Chevrolet	Corsica	Base
2006-2011	Chevrolet	HHR	LS
2007-2011	Chevrolet	HHR	LS Panel
2006-2011	Chevrolet	HHR	LT
2007-2010	Chevrolet	HHR	LT Panel
1996-1997	Chevrolet	K1500	Base
1996-1998	Chevrolet	K1500	Cheyenne
1999	Chevrolet	K1500	LS
1996-1998	Chevrolet	K1500	Silverado
1996-1998	Chevrolet	K1500	WT
1996-1999	Chevrolet	K1500 Suburban	Base
1996-1999	Chevrolet	K1500 Suburban	LS
1996-1997,1999	Chevrolet	K1500 Suburban	LT
1994-1996	Chevrolet	Lumina	Base
1994	Chevrolet	Lumina	Euro
1995-1996	Chevrolet	Lumina	LS
1997-1999,2004-2005	Chevrolet	Malibu	Base
2004	Chevrolet	Malibu	LS
2004	Chevrolet	Malibu	LT
2004	Chevrolet	Malibu	Maxx
2004	Chevrolet	Malibu	Maxx LS
2004	Chevrolet	Malibu	Maxx LT
1998-2000	Chevrolet	Metro	Base
1998-2001	Chevrolet	Metro	LSi
1995-1996	Chevrolet	Monte Carlo	LS
1988	Chevrolet	Nova	Twin Cam
1998-2002	Chevrolet	Prizm	Base
1998-2002	Chevrolet	Prizm	LSi
1996-1999	Chevrolet	Tahoe	Base
2000	Chevrolet	Tahoe	Limited
1996-1999	Chevrolet	Tahoe	LS
1996-1999	Chevrolet	Tahoe	LT
2000	Chevrolet	Tahoe	Z71
1999-2003	Chevrolet	Tracker	Base
1999-2000	Chevrolet	Tracker	LSi
2001-2003	Chevrolet	Tracker	LT
2001-2003	Chevrolet	Tracker	ZR2
2007	Chrysler	Aspen	Limited
1993-1995	Chrysler	Concorde	Base
1996-1997	Chrysler	Concorde	LX
1996-1997	Chrysler	Concorde	LXi
1994-1997	Chrysler	LHS	Base
1994-1996	Chrysler	New Yorker	Base
1996-2000	Chrysler	Sebring	JX
1996-2000	Chrysler	Sebring	JXi
1995-2000	Chrysler	Sebring	LX
1995-2000	Chrysler	Sebring	LXi
1999-2002	Daewoo	Lanos	S
1999-2000	Daewoo	Lanos	SE
2001-2002	Daewoo	Lanos	Sport
1999-2000	Daewoo	Lanos	SX
1999-2002	Daewoo	Nubira	CDX
2000-2002	Daewoo	Nubira	SE
1999	Daewoo	Nubira	SX
1995-2000	Dodge	Avenger	Base
1995-2000	Dodge	Avenger	ES
1987-1991	Dodge	Colt	Vista
1997-1998,2004	Dodge	Dakota	Base
2005-2006	Dodge	Dakota	Laramie
1997-1998,2004-2006	Dodge	Dakota	SLT
2004	Dodge	Dakota	SLT Plus
1997-1998,2004-2005	Dodge	Dakota	Sport
2004	Dodge	Dakota	Sport Plus
2005-2006	Dodge	Dakota	ST
2004	Dodge	Dakota	SXT
2006-2007	Dodge	Durango	Adventurer
2004-2007	Dodge	Durango	Limited
2004-2007	Dodge	Durango	SLT
2004-2005	Dodge	Durango	ST
2005-2007	Dodge	Durango	SXT
1993-1997	Dodge	Intrepid	Base
1993-1997	Dodge	Intrepid	ES
1996	Eagle	Summit	Base
1996	Eagle	Summit	DL
1996	Eagle	Summit	ESi
1996	Eagle	Summit	LX
1990-1992	Eagle	Talon	Base
1993-1994	Eagle	Talon	DL
1993-1994	Eagle	Talon	ES
1990-1994	Eagle	Talon	TSi
1993-1997	Eagle	Vision	ESi
1993-1997	Eagle	Vision	TSi
1986-1997	Ford	Aerostar	Base
1988-1991	Ford	Aerostar	Eddie Bauer
1986-1994	Ford	Aerostar	XL
1989-1994	Ford	Aerostar	XL Plus
1991-1994	Ford	Aerostar	XL Sport
1986-1997	Ford	Aerostar	XLT
1989-1997	Ford	Aerostar	XLT Plus
1991-1997	Ford	Aerostar	XLT Sport
1994-1997	Ford	Aspire	Base
1994-1995	Ford	Aspire	SE
2003-2004	Ford	Escape	Limited
2001-2004	Ford	Escape	XLS
2001-2004	Ford	Escape	XLT
1996-1997	Ford	Escort	Base
1991-1996	Ford	Escort	GT
1996-2000	Ford	Escort	LX
1992-1993	Ford	Escort	LX-E
1998-1999,2001-2002	Ford	Escort	SE
1996-1997	Ford	Escort	Sport
1997-2001,2006-2010	Ford	Explorer	Eddie Bauer
1997-2001,2006-2010	Ford	Explorer	Limited
2000-2001	Ford	Explorer	Postal
1997-2000	Ford	Explorer	Sport
1997-1999	Ford	Explorer	XL
2000-2001	Ford	Explorer	XL Fleet
1999-2001,2006	Ford	Explorer	XLS
1997-2001,2006-2010	Ford	Explorer	XLT
2001	Ford	Explorer Sport	Base
2007-2010	Ford	Explorer Sport Trac	Limited
2007-2010	Ford	Explorer Sport Trac	XLT
2005-2007	Ford	Five Hundred	Limited
2005-2006	Ford	Five Hundred	SE
2005-2007	Ford	Five Hundred	SEL
2000-2004	Ford	Focus	LX
2007-2011	Ford	Focus	S
2000-2004,2007-2011	Ford	Focus	SE

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93462. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2000-2005 Honda S2000 and interchanges with OE part 18160-PCX-A00. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2000-2005	Honda	S2000	Base

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93376. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2004 Toyota Sequoia 4.7L. MagnaFlow 93376 includes (1) Torca Clamp, (1) Flange Gasket, (2) Flat Ring Gaskets and interchanges with OE parts 17450-0F030. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2001-2004	Toyota	Sequoia	Limited
2001-2004	Toyota	Sequoia	SR5

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Expertly Formulated Catalyst Blend Maximizes Efficiency Ensuring Optimal Emissions To Keep Your Check Engine Light Off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
1975	Buick	Apollo	Base
1975	Buick	Apollo	SR
1992-1995	Buick	LeSabre	Custom
1992-1995	Buick	LeSabre	Limited
1991-1995	Buick	Park Avenue	Base
1991-1995	Buick	Park Avenue	Ultra
1991	Buick	Reatta	Base
1990-1993	Buick	Regal	Custom
1990-1993	Buick	Regal	Gran Sport
1990-1993	Buick	Regal	Limited
1991-1993	Buick	Riviera	Luxury
1975-1980	Buick	Skyhawk	Base
1980	Buick	Skyhawk	Designers' Accent Edition
1979-1980	Buick	Skyhawk	Road Hawk
1975-1980	Buick	Skyhawk	S
1975-1979	Buick	Skylark	Base
1978-1979	Buick	Skylark	Custom
1976-1979	Buick	Skylark	S
1978	Buick	Skylark	Sport
1975-1977	Buick	Skylark	SR
1975-1979,1993-1995	Chevrolet	Camaro	Base
1979	Chevrolet	Camaro	Berlinetta
1975-1978	Chevrolet	Camaro	LT
1976-1978	Chevrolet	Camaro	LT Rally Sport
1976-1979	Chevrolet	Camaro	Rally Sport
1975	Chevrolet	Camaro	RS
1979	Chevrolet	Camaro	Z28
1992-1994	Chevrolet	Lumina	Euro
1995	Chevrolet	Lumina	LS
1991-1994	Chevrolet	Lumina	Z34
1992	Chevrolet	Lumina APV	Base
1992	Chevrolet	Lumina APV	CL
1995	Chevrolet	Monte Carlo	Z34
1975-1980	Chevrolet	Monza	2+2
1978-1980	Chevrolet	Monza	2+2 Sport
1976-1980	Chevrolet	Monza	2+2 Spyder
1976,1978-1980	Chevrolet	Monza	Base
1977	Chevrolet	Monza	Mirage
1975,1978-1979	Chevrolet	Monza	S
1978	Chevrolet	Monza	Sport
1980	Chevrolet	Monza	Spyder
1976-1977	Chevrolet	Monza	Towne Coupe
1976-1977	Chevrolet	Monza	Towne Coupe Cabriolet
1976-1977	Chevrolet	Monza	Towne Coupe Sport
1976	Chevrolet	Monza	Towne Coupe Spyder
1992-1994	Chevrolet	S10 Blazer	Base
1994	Chevrolet	S10 Blazer	LT
1992	Chevrolet	S10 Blazer	Sport
1992-1994	Chevrolet	S10 Blazer	Tahoe
1992-1994	Chevrolet	S10 Blazer	Tahoe LT
1985-1988	Chevrolet	Spectrum	Base
1987-1988	Chevrolet	Spectrum	CL
1987-1988	Chevrolet	Spectrum	CL Plus
1987-1988	Chevrolet	Spectrum	Express
1987-1988	Chevrolet	Spectrum	Turbo
1990-1991	Chrysler	Imperial	Base
1987-1992	Chrysler	LeBaron	Base
1989-1990	Chrysler	LeBaron	GT
1989-1992	Chrysler	LeBaron	GTC
1987-1989	Chrysler	LeBaron	GTS
1989-1990	Chrysler	LeBaron	High Line
1991	Chrysler	LeBaron	LX
1987-1990	Chrysler	LeBaron	Premium
1988-1989	Chrysler	New Yorker	Base
1990	Chrysler	New Yorker	Fifth Avenue
1988-1990	Chrysler	New Yorker	Landau
1990	Chrysler	New Yorker	Salon
1987-1988,1992-1995	Chrysler	Town & Country	Base
1986-1988	Dodge	600	Base
1986	Dodge	600	ES
1986-1988	Dodge	600	SE
1992-1995	Dodge	Caravan	Base
1992-1995	Dodge	Caravan	C/V
1992-1995	Dodge	Caravan	ES
1992-1995	Dodge	Caravan	LE
1992-1995	Dodge	Caravan	SE
1994-1996	Dodge	Dakota	Base
1994-1996	Dodge	Dakota	SLT
1994-1996	Dodge	Dakota	Sport
1994-1996	Dodge	Dakota	WS
1987-1993	Dodge	Daytona	Base
1989-1993	Dodge	Daytona	ES
1989-1990	Dodge	Daytona	ES Turbo
1991-1992	Dodge	Daytona	Iroc
1992-1993	Dodge	Daytona	Iroc R/T
1987-1988	Dodge	Daytona	Pacifica
1989-1991	Dodge	Daytona	Shelby
1987-1988	Dodge	Daytona	Shelby Z
1988-1993	Dodge	Dynasty	Base
1988-1990	Dodge	Dynasty	LE
1991-1993	Dodge	Dynasty	LS
1992-1995	Dodge	Grand Caravan	Base
1992-1995	Dodge	Grand Caravan	ES
1992-1995	Dodge	Grand Caravan	LE
1992-1995	Dodge	Grand Caravan	SE
1989	Dodge	Lancer	Base
1989	Dodge	Lancer	ES
1989	Dodge	Lancer	Shelby
1995	Dodge	Neon	Base
1995	Dodge	Neon	High Line
1995	Dodge	Neon	Sport
1988	Dodge	Shadow	Base
1988	Dodge	Shadow	ES
1988	Dodge	Shadow	Shelby
1989-1992	Dodge	Spirit	Base
1989-1992	Dodge	Spirit	ES
1989-1992	Dodge	Spirit	LE
1991-1992	Dodge	Spirit	R/T
1982-1984	Dodge	W150	Base
1982-1984	Dodge	W250	Base
1986	Ford	Bronco II	Base
1986-1987	Ford	Bronco II	Eddie Bauer
1987	Ford	Bronco II	XL
1986-1987	Ford	Bronco II	XLT
1975-1978	Ford	E-100 Econoline	Base
1975-1978	Ford	E-100 Econoline	Chateau
1975-1978	Ford	E-100 Econoline	Custom
1975-1978	Ford	E-100 Econoline	Northland
1991-1994	Ford	Explorer	Eddie Bauer
1993-1994	Ford	Explorer	Limited
1991-1994	Ford	Explorer	Sport
1991-1994	Ford	Explorer	XL
1991-1994	Ford	Explorer	XLT
1977-1978	Ford	F-100	Base
1977-1979	Ford	F-100	Custom
1977-1978	Ford	F-100	Northland
1977-1979	Ford	F-100	Ranger
1978-1979	Ford	F-100	Ranger Lariat
1977-1979	Ford	F-100	Ranger XLT
1977	Ford	F-100	XLT
1986	Ford	Ranger	Base
1987-1992	Ford	Ranger	Custom
1988-1989	Ford	Ranger	GT
1986-1987,1989-1992	Ford	Ranger	S
1990	Ford	Ranger	S Plus
1993-1994	Ford	Ranger	Splash
1991-1993	Ford	Ranger	Sport
1986-1994	Ford	Ranger	STX
1986,1993-1994	Ford	Ranger	XL
1986-1994	Ford	Ranger	XLT
1987-1988	Ford	Thunderbird	Turbo
1989	Geo	Spectrum	Base
1992-1993	Geo	Storm	2+2
1992-1993	Geo	Storm	2+2 GSi
1992-1993	Geo	Storm	Base
1992-1994	GMC	Jimmy	Base
1992-1994	GMC	Jimmy	SLE
1993-1994	GMC	Jimmy	SLS
1992-1994	GMC	Jimmy	SLT
1989-1994	Isuzu	Amigo	S
1989-1994	Isuzu	Amigo	XS
1981-1987	Isuzu	I-Mark	Base
1981-1985	Isuzu	I-Mark	DLX
1982-1983,1989	Isuzu	I-Mark	LS
1987-1989	Isuzu	I-Mark	S
1988-1989	Isuzu	I-Mark	XS
1983-1989	Isuzu	Impulse	Base
1991-1992	Isuzu	Impulse	RS
1984	Isuzu	Impulse	SE
1990-1992	Isuzu	Impulse	XS
1988-1992	Isuzu	Pickup	1 Ton
1981-1987	Isuzu	Pickup	Base
1981-1987	Isuzu	Pickup	DLX
1983,1986-1992	Isuzu	Pickup	LS
1984-1985	Isuzu	Pickup	LX
1988-1995	Isuzu	Pickup	S
1989-1990	Isuzu	Pickup	XS
1991-1995	Isuzu	Rodeo	LS
1991-1995	Isuzu	Rodeo	S
1991-1992	Isuzu	Rodeo	XS
1984-1985	Isuzu	Trooper	Base
1986-1987	Isuzu	Trooper	DLX
1995	Isuzu	Trooper	Limited
1986-1991,1994-1995	Isuzu	Trooper	LS
1986	Isuzu	Trooper	LX
1989-1990,1994-1995	Isuzu	Trooper	RS
1988-1991,1994-1995	Isuzu	Trooper	S
1991	Isuzu	Trooper	SE
1988-1991	Isuzu	Trooper	XS
1979-1981	Jeep	Cherokee	Base
1981	Jeep	Cherokee	Chief
1981	Jeep	Cherokee	Laredo
1979-1980	Jeep	Cherokee	S
1979-1980	Jeep	Cherokee	Wide Track
1979-1980	Jeep	Cherokee	Wide Track Chief
1979-1980	Jeep	Cherokee	Wide Track Golden Eagle
1980	Jeep	Cherokee	Wide Track Laredo
1980	Jeep	Cherokee	Wide Track Limited
1979-1983	Jeep	CJ5	Base
1979-1980	Jeep	CJ5	Golden Eagle
1980-1983	Jeep	CJ5	Laredo
1982-1983	Jeep	CJ5	Limited
1979-1983	Jeep	CJ5	Renegade
1981-1983	Jeep	Scrambler	Base
1982-1983	Jeep	Scrambler	SL
1982-1983	Jeep	Scrambler	SR
1979-1981	Jeep	Wagoneer	Base
1979-1981	Jeep	Wagoneer	Limited
1992-1994	Lexus	ES300	Base
1992-1995	Mazda	929	Base

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Diesel Oxidation Catalyst 60105. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant diesel oxidation catalysts, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Simplifies installation with essential gaskets and hardware being included in the box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
1975-1977	Audi	100 Series	LS
1980-1983	Audi	4000	Base
1982-1983	Audi	4000	GT
1982-1987	Audi	4000	S
1978-1983	Audi	5000	Base
1979-1984	Audi	5000	S
1988-1990	Audi	80	Base
1988-1991	Audi	90	Base
2010-2013	Audi	A3	TDI
1981-1985	Audi	Coupe	Base
1986-1987	Audi	Coupe	GT
1975-1979	Audi	Fox	Base
2014	Audi	Q7	Premium
2014	Audi	Q7	Premium Plus
2014	Audi	Q7	Prestige
2009-2010	Audi	Q7	TDI
2011-2014	Audi	Q7	TDI Premium
2011-2014	Audi	Q7	TDI Premium Plus
2011-2014	Audi	Q7	TDI Prestige
1983-1985	Audi	Quattro	Base
2009-2011	BMW	335d	Base
2014	BMW	X5	sDrive35i
2009-2014	BMW	X5	xDrive35d
2014	BMW	X5	xDrive35i
1980	Buick	Electra	Estate Wagon
1980	Buick	Electra	Limited
1980	Buick	Electra	Park Avenue
1980	Buick	Estate Wagon	Base
1980	Buick	LeSabre	Base
1980	Buick	LeSabre	Limited
1980	Buick	Riviera	Base
1980	Buick	Riviera	S
1980	Chevrolet	Camaro	Base
1980	Chevrolet	Camaro	Berlinetta
1980	Chevrolet	Camaro	Rally Sport
1980	Chevrolet	Caprice	Classic
1980	Chevrolet	Caprice	Classic Landau
1980	Chevrolet	Caprice	Classic Sport
1980	Chevrolet	El Camino	Base
1980	Chevrolet	El Camino	Royal Knight
1980	Chevrolet	Impala	Base
1980	Chevrolet	Impala	Sport
1987-1993	Chevrolet	LLV	Base
1980	Chevrolet	Malibu	Base
1980	Chevrolet	Malibu	Classic
1980	Chevrolet	Malibu	Classic Estate
1980	Chevrolet	Malibu	Classic Landau
1980	Chevrolet	Malibu	Classic Sport
1980	Chevrolet	Malibu	Estate
1980	Chevrolet	Malibu	Sport
1980	Chevrolet	Monte Carlo	Landau
1980	Chevrolet	Monte Carlo	Sport
1982-1993	Chevrolet	S10	Base
1982-1990	Chevrolet	S10	Durango
1992-1993	Chevrolet	S10	EL
1982-1989	Chevrolet	S10	Sport
1982-1992	Chevrolet	S10	Tahoe
1983-1988	Chevrolet	S10 Blazer	Base
1987-1988	Chevrolet	S10 Blazer	High Country
1983-1988	Chevrolet	S10 Blazer	Sport
1983-1988	Chevrolet	S10 Blazer	Tahoe
2003-2009	Dodge	Sprinter 2500	Base
2003-2009	Dodge	Sprinter 3500	Base
1990-1993	Ford	Festiva	GL
1989-1993	Ford	Festiva	L
1990	Ford	Festiva	L Plus
1989-1990	Ford	Festiva	LX
2003-2006	Freightliner	Sprinter 2500	Base
2003-2006	Freightliner	Sprinter 3500	Base
1980	GMC	Caballero	Base
1980	GMC	Caballero	Diablo
1980	GMC	Caballero	Laredo
1982-1990	GMC	S15	Base
1987	GMC	S15	EL
1983,1986-1988	GMC	S15	Gypsy
1982-1990	GMC	S15	High Sierra
1982-1990	GMC	S15	Sierra Classic
1982	GMC	S15	Sierra Grande
1983-1988	GMC	S15 Jimmy	Base
1983-1988	GMC	S15 Jimmy	Gypsy
1985	GMC	S15 Jimmy	High Sierra
1983-1988	GMC	S15 Jimmy	Sierra Classic
1988	GMC	S15 Jimmy	Timberline
1991-1993	GMC	Sonoma	Base
1991-1993	GMC	Sonoma	SLE
1993	GMC	Sonoma	SLS
2007-2009	Jeep	Grand Cherokee	Laredo
2007-2009	Jeep	Grand Cherokee	Limited
2007-2009	Jeep	Grand Cherokee	Overland
2005-2006	Jeep	Liberty	Limited
2005-2006	Jeep	Liberty	Sport
1983	Mazda	626	Base
1984-1987	Mazda	626	DX
1986-1987	Mazda	626	GT
1983-1987	Mazda	626	LX
1998-1999	Mercedes-Benz	E300	Base
2007-2009	Mercedes-Benz	E320	Bluetec
2012-2013	Mercedes-Benz	E350	Bluetec
2009	Mercedes-Benz	GL320	Bluetec 4Matic
2007-2008	Mercedes-Benz	GL320	CDI
2010-2014	Mercedes-Benz	GL350	Bluetec 4Matic
2009	Mercedes-Benz	ML320	Bluetec 4Matic
2007-2008	Mercedes-Benz	ML320	CDI
2010-2014	Mercedes-Benz	ML350	Bluetec 4Matic
2009	Mercedes-Benz	R320	Bluetec
2007-2008	Mercedes-Benz	R320	CDI
2010-2012	Mercedes-Benz	R350	Bluetec 4Matic
2012-2013	Mercedes-Benz	S350	Bluetec 4Matic
2010-2013	Mercedes-Benz	Sprinter 2500	Base
2010-2013	Mercedes-Benz	Sprinter 3500	Base
1980	Oldsmobile	98	Luxury
1980	Oldsmobile	98	Regency
1980	Oldsmobile	Custom Cruiser	Base
1980	Oldsmobile	Cutlass	Base
1980	Oldsmobile	Cutlass	Brougham
1980	Oldsmobile	Cutlass	LS
1980	Oldsmobile	Cutlass Calais	Base
1980	Oldsmobile	Cutlass Cruiser	Base
1980	Oldsmobile	Cutlass Cruiser	Brougham
1980	Oldsmobile	Cutlass Salon	Base
1980	Oldsmobile	Cutlass Salon	Brougham
1980	Oldsmobile	Cutlass Supreme	Base
1980	Oldsmobile	Cutlass Supreme	Brougham
1980	Oldsmobile	Delta 88	Base
1980	Oldsmobile	Delta 88	Holiday
1980	Oldsmobile	Delta 88	Royale
1980	Oldsmobile	Delta 88	Royale Brougham
1980	Oldsmobile	Toronado	Brougham
1980	Oldsmobile	Toronado	XSC
1980	Pontiac	Bonneville	Base
1980	Pontiac	Bonneville	Brougham
1980	Pontiac	Bonneville	Safari
1980	Pontiac	Catalina	Base
1980	Pontiac	Catalina	Safari
1980	Pontiac	Grand LeMans	Base
1980	Pontiac	Grand LeMans	Safari
1980	Pontiac	LeMans	Base
1980	Pontiac	LeMans	Safari
1977-1979	Porsche	924	Base
1979	Porsche	924	Turbo
2013-2014	Porsche	Cayenne	Diesel
2014	Porsche	Cayenne	Diesel Platinum Edition
2013-2014	Porsche	Cayenne	S Hybrid
1975-1979	Volkswagen	Beetle	Base
1999-2004	Volkswagen	Beetle	GL
1999-2004	Volkswagen	Beetle	GLS
2005	Volkswagen	Beetle	GLS TDI
1999	Volkswagen	Beetle	GLX
2014	Volkswagen	Beetle	GSR
2014	Volkswagen	Beetle	R-Line
2001-2002	Volkswagen	Beetle	Sport
1998,2006,2013-2015	Volkswagen	Beetle	TDI
1985-1990	Volkswagen	Cabriolet	Base
1988-1990	Volkswagen	Cabriolet	Bestseller
1988-1990	Volkswagen	Cabriolet	Boutique
1987,1989	Volkswagen	Cabriolet	Wolfsburg Edition
1975-1981	Volkswagen	Dasher	Base
1987-1993	Volkswagen	Fox	Base
1987-1993	Volkswagen	Fox	GL
1989-1990	Volkswagen	Fox	GL Sport
1999-2003	Volkswagen	Golf	GL
2004	Volkswagen	Golf	GL TDI
2000-2003	Volkswagen	Golf	GLS
2004,2006	Volkswagen	Golf	GLS TDI
1999,2005,2010-2014	Volkswagen	Golf	TDI
1980-1984	Volkswagen	Jetta	Base
1984	Volkswagen	Jetta	GL
2005	Volkswagen	Jetta	GL TDI
1984	Volkswagen	Jetta	GLI
2005	Volkswagen	Jetta	GLS TDI
1981	Volkswagen	Jetta	Special Edition
1997-2006,2009-2014	Volkswagen	Jetta	TDI
2010	Volkswagen	Jetta	TDI Cup Edition
2012-2014	Volkswagen	Jetta	TDI Premium
2015	Volkswagen	Jetta	TDI S
2015	Volkswagen	Jetta	TDI SE
2015	Volkswagen	Jetta	TDI SEL
1983	Volkswagen	Jetta	Wolfsburg Edition
2004	Volkswagen	Passat	GL
2004-2005	Volkswagen	Passat	GL TDI
2004-2005	Volkswagen	Passat	GLS
2004-2005	Volkswagen	Passat	GLS TDI
1996-1997	Volkswagen	Passat	TDI
2012-2015	Volkswagen	Passat	TDI SE
2012-2013	Volkswagen	Passat	TDI SEL
2014-2015	Volkswagen	Passat	TDI SEL Premium
1982-1983,1985	Volkswagen	Quantum	Base
1982-1985	Volkswagen	Quantum	GL
1984	Volkswagen	Quantum	Wolfsburg Edition
1975-1982	Volkswagen	Rabbit	Base
1975-1980	Volkswagen	Rabbit	Custom
1975-1980	Volkswagen	Rabbit	Deluxe
1983-1984	Volkswagen	Rabbit	GL
1983-1984	Volkswagen	Rabbit	GTI
1981-1982,1984	Volkswagen	Rabbit	L
1982	Volkswagen	Rabbit	Limited Edition
1981-1983	Volkswagen	Rabbit	LS
1981-1982	Volkswagen	Rabbit	S
1983-1984	Volkswagen	Rabbit	Wolfsburg Edition
1980-1983	Volkswagen	Rabbit Pickup	Base

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52297. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2022 Ford F-250 Super Duty and 2011-2022 Ford F-350 Super Duty. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2011-2022	Ford	F-250 Super Duty	King Ranch
2011-2022	Ford	F-250 Super Duty	Lariat
2013-2022	Ford	F-250 Super Duty	Platinum
2011-2022	Ford	F-250 Super Duty	XL
2011-2022	Ford	F-250 Super Duty	XLT
2011-2022	Ford	F-350 Super Duty	King Ranch
2011-2022	Ford	F-350 Super Duty	Lariat
2013-2022	Ford	F-350 Super Duty	Platinum
2011-2022	Ford	F-350 Super Duty	XL
2011-2022	Ford	F-350 Super Duty	XLT

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52186. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2010-2017 Chevrolet Equinox, 2010-2017 GMC Terrain, and more, this direct-fit catalytic converter also interchanges with OE part 25970315. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Technical Bulletin
Technical Bulletin
Technical Bulletin

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2012-2015	Chevrolet	Captiva Sport	LS
2013-2015	Chevrolet	Captiva Sport	LT
2013-2015	Chevrolet	Captiva Sport	LTZ
2015-2017	Chevrolet	Equinox	L
2010-2017	Chevrolet	Equinox	LS
2010-2017	Chevrolet	Equinox	LT
2010-2016	Chevrolet	Equinox	LTZ
2017	Chevrolet	Equinox	Premier
2013-2017	GMC	Terrain	Denali
2015-2017	GMC	Terrain	SL
2010-2017	GMC	Terrain	SLE
2010-2017	GMC	Terrain	SLT

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51153. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2018 Ford Focus and interchanges with OE parts BV6Z-5G232-A and CP9Z-5G232-A. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2012-2018	Ford	Focus	S
2012-2018	Ford	Focus	SE
2012,2017-2018	Ford	Focus	SEL
2013-2015	Ford	Focus	ST
2012-2018	Ford	Focus	Titanium

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49135. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2017 Audi Q5, 2012-2015 Audi A6 Quattro, and more, this direct-fit catalytic converter also interchanges with OE parts 8K0 254 200 FX and 8K0 254 200 KX, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2009	Audi	A4 Quattro	Base
2009	Audi	A4 Quattro	Cabriolet
2008-2010	Audi	A5 Quattro	Base
2012-2014	Audi	A6 Quattro	Premium
2012-2015	Audi	A6 Quattro	Premium Plus
2012-2015	Audi	A6 Quattro	Prestige
2014	Audi	A6 Quattro	TDI Premium Plus
2014	Audi	A6 Quattro	TDI Prestige
2012-2013	Audi	A7 Quattro	Base
2014-2015	Audi	A7 Quattro	Premium Plus
2014-2015	Audi	A7 Quattro	Prestige
2014	Audi	A7 Quattro	TDI Premium Plus
2014	Audi	A7 Quattro	TDI Prestige
2013-2015	Audi	A8 Quattro	Base
2013-2018	Audi	A8 Quattro	L
2014-2016	Audi	A8 Quattro	L TDI
2009-2010	Audi	Q5	Premium
2009-2017	Audi	Q5	Premium Plus
2009-2017	Audi	Q5	Prestige
2014-2016	Audi	Q5	TDI Premium Plus
2016	Audi	Q5	TDI Premium Plus S-Line
2014-2016	Audi	Q5	TDI Prestige
2016	Audi	Q5	TDI Prestige S-Line
2010-2013	Audi	S4	Base
2014-2016	Audi	S4	Premium Plus
2014-2016	Audi	S4	Prestige
2013,2017	Audi	S5	Base
2010-2013	Audi	S5	Cabriolet
2014-2016	Audi	S5	Premium Plus
2014-2016	Audi	S5	Prestige
2014-2017	Audi	SQ5	Premium Plus
2014-2017	Audi	SQ5	Prestige

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457065. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2000-2005 Toyota MR2 Spyder and interchanges with OE parts 17410-22132 and 17410-22130, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Precision Stamped Collector Design For Optimal Exhaust Flow; Engine Efficiency And Fuel Economy
• Simplifies installation with essential gaskets and hardware being included in the box
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 stainless steel MIG welds

This Part Fits:

Year	Make	Model	Submodel
2000-2005	Toyota	MR2 Spyder	Base